(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
6 Series L-Shape Aluminum Frame - 60x60x30mm (Part Numbers)
- Volume Discount
Aluminum Frame Series 6, L shape 60 x 60 x 30mm
Surface treatment is not applied to cut surfaces and additional machining parts.
(i)Caution
- Additional freight and delivery charge are added to items longer than 2000.1mm
Part Number
Configured Part Number is shown.
Dimensional Drawing of Aluminum Frames
EFS (standard type)HFS (standard type)
*No tolerance regulations for fixed length frames
| 6 Series |
 |
Aluminum Frames, For other dimensional tolerance-related information,
Groove details
(common to all series)Groove bottom details
(HFS/CAF type)(GFS type)(EFS type)T-slot dimensionsEnlarged view of part AEnlarged view of part AEnlarged view of part A
(common to all series)Groove bottom details
(HFS/CAF type)(GFS type)(EFS type)T-slot dimensionsEnlarged view of part AEnlarged view of part AEnlarged view of part A
■Aluminum Frames, The 6 Series is an aluminum extrusion with a groove width of 8±0.36 mm. Suitable for M6 bolts.
[ ! ]The cut surfaces and additionally machined areas are not surface treated.
[ ! ]Aluminum Frames, If you request additional tapped holes, the processing will be performed in the red circled areas on the aluminumextrusion outline drawing.
[ ! ]The cut surfaces and additionally machined areas are not surface treated.
[ ! ]Aluminum Frames, If you request additional tapped holes, the processing will be performed in the red circled areas on the aluminumextrusion outline drawing.
Specified Length Aluminum Frames Specifications Table (Additional Processing: Possible)
| Model Aluminum Frames | − | L |
| HFS6−606030 | − | 800 |
| type | Material | Surface Treatment | Model | L specified in 0.5mm increments (tolerance ±0.5mm) | Mass kg/m | Cross-sectional area mm 2 | Moment of inertia mm 4 | |
| ℓx | ℓy | |||||||
| HFS | A6005CSS-T5 | White anodized aluminum | HFS6-6 06030 | 50 to 4000 | 2.33 | 864 | 27.3× 104 | 27.3× 104 |
| EFS | A6005CSS-T5 | White anodized aluminum | EF S6-606030 | 50 to 4000 | 2.21 | 819 | 27.38× 104 | 27.38× 104 |
Fixed Length Aluminum Frames Specifications Table (Effective Length 4000mm)
[ ! ]Aluminum Frames, Fixed-length frames have a format with K at the beginning of the format code for each frame.| Model Aluminum Frames | − | L |
| KEFS6−606030 | − | 4000 |
| type | Material | Surface Treatment | Model | Lmm (no tolerance specified) | Cross-sectional area mm 2 | Moment of inertia mm 4 | |
| ℓx | ℓy | ||||||
| HFS | A6005CSS-T5 | White anodized aluminum | KHF S6-606030 | 4000 | 864 | 27.3× 104 | 27.3× 104 |
| EFS | A6005CSS-T5 | White anodized aluminum | KEFS6-606030 | 4000 | 819 | 27.38× 104 | 27.38× 104 |
The actual length including the gripping allowance will be 4000 mm or more (it will be several tens of mm longer).
As fixed-length frames are frames that are cut by the customer, the exact length cannot be specified.
Alterations of Aluminum Frames (Specified Length Only, Fixed Length Not Possible)
[ ! ]Aluminum Frames, By using the various alterations listed below, MISUMI's specified length aluminum frames can be assembled withgreater flexibility.
Some frames cannot be applied depending on the type and size. Please check the price list on each alteration pageto see if it is applicable.
Aluminum Frames, Items marked with "-" in the price list cannot be applied.
Some frames cannot be applied depending on the type and size. Please check the price list on each alteration pageto see if it is applicable.
Aluminum Frames, Items marked with "-" in the price list cannot be applied.
| classification | Additional Work name | Alteration code example | How to Use | Content |
|---|---|---|---|---|
| End face tapping | End face tap (center hole) | LTP/RTP/TPW LHP/RHP/HPW |  | The frame is tapped. LTP/RTP/TPW: M8 depth 24mm LHP/RHP/HPW: M5 depth 10mm (with helical insert inserted) This processing is required for blind joints ( screw joints / simple joints ). |
| End face tap (four-sided hole) | LSP/RSP/SPW |  | Aluminum Frames, The holes on the frame end faces and corners are tapped (M5, depth 10). | |
| Change cutting method | High-precision cutting | SC |  | Aluminum Frames, The tolerance of the overall length L has been changed from L±0.5 to L±0.2, allowing for high-precisioncutting. *Only applicable to L≦1500 |
| 45 degree cut | L□T45 R□T45 |  | The cut is made at a 45-degree angle. 45-degree cuts cannot be specified in the same direction with other alterations. Example: HFS6-3030-500- L TP- LAT45 ⇒ ✖ (alterations in the same direction (left)) HFS6-3030-500- L TP- RAT45 ⇒ 〇 (separate alterations on left and right) [ ! ]If you would like to cut at an angle other than 45 degrees, please contact our catalog non-standard product service . | |
| Wrench Drilling | Fixed position wrench hole | LCH/LCV/LCP RCH/RCV/RCP |  | Aluminum Frames, This is an additional process to drill a wrench hole to match the position of the end face tap of the matingframe when fastening a blind joint that assembles frames into an L shape. ・The wrench hole d dimension can be selected from X5 or X8. If not specified, the d dimension will be 8. Blind joints that require this process ( screw joints / single joints / tapping joints ) |
Hole position shifted by the thickness of the frame cap | FL FR |  | Aluminum Frames, The hole position for the additional fixed position wrench hole is moved by the thickness of the frame cap (3mm). This prevents the frame cap from protruding when assembled at a corner. | |
| Wrench holes at specified positions | AH/BH/CH/DH/EH AV/BV/CV/DV/EV AP/BP/CP/DP/EP |  | Aluminum Frames, This is an additional process that allows you to drill wrench holes at any desired position. It can be usedwhen fastening blind joints other than at the frame end. ・The wrench hole d dimension can be selected from X5 or X8. If no specification is made, the d dimension willbe 8. ・Up to five holes can be drilled in each of the horizontal, vertical, and cross directions. [ ! ] If you require six or more wrench holes, please contact our catalog non-standard product service . | |
| Drilling holes specifically for blind joints | L hole | JLP○○-H△ KLP○○-H△ |  | Drill holes required for connecting parallel joints. ( Parallel joints ) |
| Other processing | C-chamfered end | CW |  | Aluminum Frames, The outer periphery of the frame end face is chamfered. |
| Sticking stickers | ZZZ |  | A sticker printed with the catalog number etc. is attached to the aluminum frame. Aluminum Frames, There are restrictions on the number of characters etc., but it is also possible to print the customer's serialnumber and unit number. |
6 Series Related Parts of Aluminum Frames
■Aluminum Frames accessories
■Compatible frame caps of Aluminum Frames
| Frame model number | Compatible frame caps | |||||
| Product Type | color | Thickness | Model number | Number of uses | ||
The same applies to HFS6-606030 and EFS6-606030 Aluminum Frames, fixed-length frames (model numbers starting with K). |  | Cap stopper | black | 3 | HFC6-606030-B | 1 |
| Light gray | 3 | HFC6-606030-S | 1 | |||
Selection Support Information of Aluminum Frames
■Frame connection methods of Aluminum Frames
Frame connection methods can be broadly divided into the following two types.
Frame connection methods can be broadly divided into the following two types.
bracket | Blind Joint | ||
Connection example |  |  | |
Features | - Connects outside the frame - Can be moved to any position - Not aesthetically pleasing | ・Connects inside the frame ・Aesthetically pleasing ・Requires processing of the frame |
■How to think about the allowable guideline load (deflection) for Aluminum Frames
[!]The allowable guideline load is the load that causes the frame to deflect within 1 mm per 1000 mm of length.
Deflection exceeding this will not cause damage, but it should be considered the maximum practical deflection. (Theallowable guideline deflection is proportional to the length. For example, 500 mm = 0.5 mm, 2000 mm = 2 mm.) Pleaserefer to
or for your reference.
[!]The allowable guideline load is the load that causes the frame to deflect within 1 mm per 1000 mm of length.
Deflection exceeding this will not cause damage, but it should be considered the maximum practical deflection. (Theallowable guideline deflection is proportional to the length. For example, 500 mm = 0.5 mm, 2000 mm = 2 mm.) Pleaserefer to
or for your reference.
Type Overview of Aluminum Frames
| Standard Aluminum Frames | Lightweight Aluminum Frames | High-rigidity Aluminum Frames | ||||||
| HFS Type | EFS type | NFS (NEFS) type | HFSL type | NFSL type | GFS type | GNFS type | ||
| Cross-sectional photo |  |  |  |  |  |  |  | |
| Material | A6005CSS-T5 | A6005CSS-T5 | A6063S-T5 | A6005CSS-T5 | A6063S-T5 | A6061SS-T6 equivalent | A6063S-T6 equivalent | |
| Features | Standard cross-sectional shape. | Aluminum Frames, This frame maintains the same rigidity as the HFS series while achieving lighter weight and lower cost. | A significant price reduction has been achieved by changing the material. Strength (*) is the same as the HFSand EFS series. | This frame is designed to be lightweight and inexpensive. It is suitable for situations where lightweight andinexpensiveness are prioritized over strength. | Aluminum Frames, By changing the material from HFSL, we have achieved a further price reduction. Strength (*) is the same as theHFSL series. | A thick frame designed for high rigidity, suitable for enclosures that are subject to high loads. | Aluminum Frames, A significant price reduction has been achieved by changing the material of the load-bearing and rigid frame.Strength (*) is the same as the GFS series. | |
| Surface Treatment | White anodized , black anodized , clear coated , baked finish (yellow) | White anodized aluminum Black anodized aluminum | White anodized aluminum Black anodized aluminum | White anodized aluminum Black anodized aluminum | White anodized aluminum | White anodized aluminum | White anodized aluminum | |
| Compatible Series | 5 | ○ | - | ○ | - | - | - | - |
| 6 | ○ | ○ | ○ | ○ | ○ | |||
| 8 | ||||||||
| 8-45 | ||||||||
Specifications
| Part Number | - | L |
| HFS6-606030 | - | 800 |
| KEFS6-606030 | - | 4000 |
■Configurable Length Extrusions
[ ! ]Applicable to 6000mm depending on products.
[ ! ]For some extrusions, MISUMI may be unable to accept the order. Refer to Information of Special Orders (P.103) and contact the person in charge of Special Orders at MISUMI QCT Center.
■Fixed Length Extrusions (Effective Length 4000mm)
[ ! ]Part numbers beginning with the character "K" indicate Fixed Length Extrusion.
[ ! ]"Effective Length 4000mm" represents the extrusion with 4000mm or more effective length.
(several cm)
| Type | [ M ]Material | [ S ]Surface Treatment | Part Number | L 0.5mm Increment | Mass kg/m |
Sectional Area mm2 | Cross Sectional Moment of Inertia mm4 | |
| ℓx | ℓy | |||||||
| HFS | A6N01SS－T5 | Clear Anodize | HFS6-606030 | 50~4000 | 2.33 | 864 | 27.3x104 | 27.3x104 |
[ ! ]For some extrusions, MISUMI may be unable to accept the order. Refer to Information of Special Orders (P.103) and contact the person in charge of Special Orders at MISUMI QCT Center.
■Fixed Length Extrusions (Effective Length 4000mm)
[ ! ]Part numbers beginning with the character "K" indicate Fixed Length Extrusion.
| Type | [ M ]Material | [ S ]Surface Treatment | Part Number | L mm |
Sectional Area mm2 | Cross Sectional Moment of Inertia mm4 | |
| ℓx | ℓy | ||||||
| HFS | A6N01SS－T5 | Clear Anodize | KHFS6-606030 | 4000 | 864 | 27.3x104 | 27.3x104 |
(several cm)
Alterations
Alterations are available for Configurable Length Extrusions. >> Click here
Please see the alteration details >> Click here
Please see the alteration details >> Click here
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
| Part Number |
|---|
| EFS6-606030-[50-4000/0.5] |
| HFS6-606030-[50-4000/0.5] |
| KEFS6-606030-4000 |
| KHFS6-606030-4000 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | RoHS | Extrusion Type_ | L Dimension Fixed, Specified | Overall Length L (Effective Length) (mm) | Overall Length L (mm) |
|---|---|---|---|---|---|---|---|---|---|
- | 1 Piece(s) | 10 Day(s) or more | 10 | EFS (Lightweight) | Configurable | - | 50 ～ 4000 | ||
- | 1 Piece(s) | 10 Day(s) or more | 10 | HFS (Standard) | Configurable | - | 50 ～ 4000 | ||
MYR 998.62 | 1 Piece(s) | Available | 10 Day(s) or more | 10 | EFS (Lightweight) | Stationary | 4000 | - | |
MYR 1,002.63 | 1 Piece(s) | Available | 10 Day(s) or more | 10 | HFS (Standard) | Stationary | 4000 | - |
Loading...
Basic Information
| Standard Extrusion Size(mm) | 30 | Surface Treatment | Clear Anodize Processing | Extrusion Series | 6 Series |
|---|---|---|---|---|---|
| Extrusion Type | L Shape | Surface Milled | Not Provided | Material | A6N01SS-T5 |
| Extrusion Size: Width (A)(mm) | 60 | Extrusion Size: Thickness (T)(mm) | 60 | Extrusion Size: L-Shaped Width(mm) | 30 |
| Alterations | 30 |
Specification/Dimensions
-
Extrusion Type_
- HFS (Standard)
- EFS (Lightweight)
-
L Dimension Fixed, Specified
- Configurable
- Stationary
-
Overall Length L (Effective Length)(mm)
- 4000
-
Overall Length L(mm)
-
type
- EFS6-606030
- HFS6-606030
- KEFS6-606030
- KHFS6-606030
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 10 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Aluminum Frame 3 Series/Base 15/Configurable Length
- 5 Series Aluminum Frame - 20x60mm/20x80mm, 6mm Slot Width
- Aluminum Frame 5 Series/slot width 6/40x40x20mm, Parallel Surfacing
- Aluminum Frame 8 Series Square 40 × 40 mm 1 Side Slot
- Aluminum Frame 8 Series Rectangular 40 × 80 mm 4 Side Slots - A6N01SS-T5 Aluminum
- Aluminum Frame 8 Series Rectangular 40 × 80 mm 2 Side Slots
- Aluminum Frame 8-45 Series Square 50 × 50 mm 2 Side Slots
- Special Frame M6 Series Machine Faced, Partition Frame
Complementary Products
-
Reversing Bracket with Protrusion - 6 Series, 8mm Groove, 1-Row (90 Degree)
MISUMI Standard Price : MYR 3.64- Days to Ship : 1 Day(s) or more
-
Brackets Series 6 (Slot Width 8mm)/Corner Blind 30mm Square/Two-Way Type
MISUMI Standard Price : MYR 31.02- Days to Ship : 2 Day(s) or more
-
Frame End Caps - For 6 Series (Slot Width 8mm) Aluminum Frames
MISUMI Standard Price : MYR 8.81- Days to Ship : 1 Day(s) or more
-
Aluminum Frame 6 Series/slot width 8/Mixed Series (5 and 6)/Base 30/H Style
MISUMI Days to Ship : 10 Day(s) or more
Customers Who Viewed This Item Also Viewed
-
6 Series Aluminum Frame - Square 60x60mm, 4 Side Slots, A6N01SS-T5 AluminumMISUMI
Days to Ship : 7 Day(s) or more
-
-
-
Aluminum Frame 6 Series/slot width 8/60x60x30mm, Parallel SurfacingMISUMI
Days to Ship : 12 Day(s) or more
-
-
-
-
Aluminum Frame 6 Series Rectangular 60 × 120 mm 4 Side Slots - A6N01SS-T5 AluminumMISUMI
Days to Ship : 10 Day(s) or more
-
Aluminum Frame 6 Series Rectangular 60 × 90 mm 4 Side Slots - A6N01SS-T5 AluminumMISUMI
Days to Ship : 10 Day(s) or more
-
-
6 Series Aluminum Frame - Square 60x60mm, 3 Side Slots, A6N01SS-T5 AluminumMISUMI
Days to Ship : 7 Day(s) or more
-
Aluminum Frame 6 Series Rectangular 30 × 60 mm 3 Side Slot - A6N01SS-T5 AluminumMISUMI
Days to Ship : 10 Day(s) or more
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy