[Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

Marking Pins - Straight, Stepped, Hollow Edge (Part Numbers)

MISUMI

Pin that can be used when you want to scribe a product to check its dimensions.

Part Number

Configured Part Number is shown.

Product TOP

Part Number

CAD Data download and 3D preview are not available because the part number has not yet been determined.

*In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.

CAD Download

: 30; 60; 90

Part Number
KJPGKH12-P[6-10/0.01]-L[10-100/1]
KJPGKH12L-P[12-20/0.01]-L[10-50/1]
KJPGKH16-P10-L[10-100/1]
KJPGKH16-P[10.01-14/0.01]-L[10-100/1]
KJPGKH16L-P[16-25/0.01]-L[10-50/1]
KJPGKH20-P14-L[10-100/1]
KJPGKH20-P[14.01-18/0.01]-L[10-100/1]
KJPGKH20L-P[20-30/0.01]-L[10-50/1]
KJPGKH25-P18-L[10-100/1]
KJPGKH25-P[18.01-20/0.01]-L[10-100/1]
KJPGKH30-P20-L[10-50/1]
KJPGKH30-P[20.01-25/0.01]-L[10-50/1]
KJPGKHE12-P[6-10/0.01]-L[10-100/1]
KJPGKHE12L-P[12-20/0.01]-L[10-50/1]
KJPGKHE16-P10-L[10-100/1]
KJPGKHE16-P[10.01-14/0.01]-L[10-100/1]
KJPGKHE16L-P[16-25/0.01]-L[10-50/1]
KJPGKHE20-P14-L[10-100/1]
KJPGKHE20-P[14.01-18/0.01]-L[10-100/1]
KJPGKHE20L-P[20-30/0.01]-L[10-50/1]
KJPGKHE25-P18-L[10-100/1]
KJPGKHE25-P[18.01-20/0.01]-L[10-100/1]
KJPGKHE30-P20-L[10-50/1]
KJPGKHE30-P[20.01-25/0.01]-L[10-50/1]
KJPGKS12-P[6-10/0.01]-S[2-6/0.1]-L[5-20/1]-B[10-20/1]
KJPGKS12L-P[12-20/0.01]-S[3-16/0.1]-L[5-20/1]-B[10-40/1]
KJPGKS16-P[8-14/0.01]-S[3-10/0.1]-L[5-20/1]-B[10-40/1]
KJPGKS16L-P[16-25/0.01]-S[6-21/0.1]-L[5-20/1]-B[10-40/1]
KJPGKS20-P[10-18/0.01]-S[3-14/0.1]-L[5-20/1]-B[10-40/1]
KJPGKS20L-P[20-30/0.01]-S[10-26/0.1]-L[5-20/1]-B[10-40/1]
KJPGKS25-P[15-23/0.01]-S[6-19/0.1]-L[5-20/1]-B[10-40/1]
KJPGKS30-P[20-28/0.01]-S[10-24/0.1]-L[5-20/1]-B[10-40/1]
KJPGKSC12-S[2-4/0.1]-L[5-40/1]-B[3-15/1]
KJPGKSC16-S[3-6/0.1]-L[5-40/1]-B[3-30/1]
KJPGKSC20-S[6-10/0.1]-L[5-40/1]-B[5-30/1]
KJPGKSC25-S[8-14/0.1]-L[5-40/1]-B[5-35/1]
KJPGKSC30-S[12-19/0.1]-L[5-40/1]-B[5-35/1]
KJPGKSE12-P[6-10/0.01]-S[2-6/0.1]-L[5-20/1]-B[10-20/1]
KJPGKSE12L-P[12-20/0.01]-S[3-16/0.1]-L[5-20/1]-B[10-40/1]
KJPGKSE16-P[8-14/0.01]-S[3-10/0.1]-L[5-20/1]-B[10-40/1]
KJPGKSE16L-P[16-25/0.01]-S[6-21/0.1]-L[5-20/1]-B[10-40/1]
KJPGKSE20-P[10-18/0.01]-S[3-14/0.1]-L[5-20/1]-B[10-40/1]
KJPGKSE20L-P[20-30/0.01]-S[10-26/0.1]-L[5-20/1]-B[10-40/1]
KJPGKSE25-P[15-23/0.01]-S[6-19/0.1]-L[5-20/1]-B[10-40/1]
KJPGKSE30-P[20-28/0.01]-S[10-24/0.1]-L[5-20/1]-B[10-40/1]
KJPKH12-P[6-10/0.01]-L[10-100/1]
KJPKH12L-P[12-20/0.01]-L[10-50/1]
KJPKH16-P10-L[10-100/1]
KJPKH16-P[10.01-14/0.01]-L[10-100/1]
KJPKH16L-P[16-25/0.01]-L[10-50/1]
KJPKH20-P14-L[10-100/1]
KJPKH20-P[14.01-18/0.01]-L[10-100/1]
KJPKH20L-P[20-30/0.01]-L[10-50/1]
KJPKH25-P18-L[10-100/1]
KJPKH25-P[18.01-20/0.01]-L[10-100/1]
KJPKH30-P20-L[10-50/1]
KJPKH30-P[20.01-25/0.01]-L[10-50/1]
KJPKHE12-P[6-10/0.01]-L[10-100/1]
KJPKHE12L-P[12-20/0.01]-L[10-50/1]
KJPKHE16-P[10.01-14/0.01]-L[10-100/1]
KJPKHE16L-P[16-25/0.01]-L[10-50/1]
KJPKHE20-P14-L[10-100/1]
KJPKHE20-P[14.01-18/0.01]-L[10-100/1]
KJPKHE20L-P[20-30/0.01]-L[10-50/1]
KJPKHE25-P18-L[10-100/1]
KJPKHE25-P[18.01-20/0.01]-L[10-100/1]
KJPKHE30-P20-L[10-50/1]
KJPKHE30-P[20.01-25/0.01]-L[10-50/1]
KJPKS12-P[6-10/0.01]-S[2-6/0.1]-L[5-20/1]-B[10-20/1]
KJPKS12L-P[12-20/0.01]-S[3-16/0.1]-L[5-20/1]-B[10-40/1]
KJPKS16-P[8-14/0.01]-S[3-10/0.1]-L[5-20/1]-B[10-40/1]
KJPKS16L-P[16-25/0.01]-S[6-21/0.1]-L[5-20/1]-B[10-40/1]
KJPKS20-P[10-18/0.01]-S[3-14/0.1]-L[5-20/1]-B[10-40/1]
KJPKS20L-P[20-30/0.01]-S[10-26/0.1]-L[5-20/1]-B[10-40/1]
KJPKS25-P[15-23/0.01]-S[6-19/0.1]-L[5-20/1]-B[10-40/1]
KJPKS30-P[20-28/0.01]-S[10-24/0.1]-L[5-20/1]-B[10-40/1]
KJPKSE12-P[6-10/0.01]-S[2-6/0.1]-L[5-20/1]-B[10-20/1]
KJPKSE12L-P[12-20/0.01]-S[3-16/0.1]-L[5-20/1]-B[10-40/1]
KJPKSE16-P[8-14/0.01]-S[3-10/0.1]-L[5-20/1]-B[10-40/1]
KJPKSE16L-P[16-25/0.01]-S[6-21/0.1]-L[5-20/1]-B[10-40/1]
KJPKSE20-P[10-18/0.01]-S[3-14/0.1]-L[5-20/1]-B[10-40/1]
KJPKSE20L-P[20-30/0.01]-S[10-26/0.1]-L[5-20/1]-B[10-40/1]
KJPKSE25-P[15-23/0.01]-S[6-19/0.1]-L[5-20/1]-B[10-40/1]
KJPKSE30-P[20-28/0.01]-S[10-24/0.1]-L[5-20/1]-B[10-40/1]

Standard Unit Price	Minimum order quantity	Days to Ship	RoHS	Shape	Large Head / Small Head	S Dimension Tolerance on Insertion Part	P Dimension Tolerance on Insertion Part	Marking Pin Shape	Marking Pin Shape	Outer Dia. D (Ø)	B (mm)	L (mm)	P (mm)	S (mm)
-	1 Piece(s)	7 Day(s)	10	Straight	Small Head	-	g6	Standard	Straight	12	-	10 ～ 100	6 ～ 10	-
-	1 Piece(s)	7 Day(s)	10	Straight	Large Head	-	g6	Standard	Straight	12	-	10 ～ 50	12 ～ 20	-
-	1 Piece(s)	7 Day(s)	10	Straight	Small Head	-	g6	Standard	Straight	16	-	10 ～ 100	-	-
-	1 Piece(s)	7 Day(s)	10	Straight	Small Head	-	g6	Standard	Straight	16	-	10 ～ 100	10.01 ～ 14	-
-	1 Piece(s)	7 Day(s)	10	Straight	Large Head	-	g6	Standard	Straight	16	-	10 ～ 50	16 ～ 25	-
-	1 Piece(s)	7 Day(s)	10	Straight	Small Head	-	g6	Standard	Straight	20	-	10 ～ 100	-	-
-	1 Piece(s)	7 Day(s)	10	Straight	Small Head	-	g6	Standard	Straight	20	-	10 ～ 100	14.01 ～ 18	-
-	1 Piece(s)	7 Day(s)	10	Straight	Large Head	-	g6	Standard	Straight	20	-	10 ～ 50	20 ～ 30	-
-	1 Piece(s)	7 Day(s)	10	Straight	Small Head	-	g6	Standard	Straight	25	-	10 ～ 100	-	-
-	1 Piece(s)	7 Day(s)	10	Straight	Small Head	-	g6	Standard	Straight	25	-	10 ～ 100	18.01 ～ 20	-
-	1 Piece(s)	7 Day(s)	10	Straight	Small Head	-	g6	Standard	Straight	30	-	10 ～ 50	-	-
-	1 Piece(s)	7 Day(s)	10	Straight	Small Head	-	g6	Standard	Straight	30	-	10 ～ 50	20.01 ～ 25	-
-	1 Piece(s)	7 Day(s)	10	Straight	Small Head	-	g6	Sharp Pointed Tip	Straight	12	-	10 ～ 100	6 ～ 10	-
-	1 Piece(s)	7 Day(s)	10	Straight	Large Head	-	g6	Sharp Pointed Tip	Straight	12	-	10 ～ 50	12 ～ 20	-
-	1 Piece(s)	7 Day(s)	10	Straight	Small Head	-	g6	Sharp Pointed Tip	Straight	16	-	10 ～ 100	-	-
-	1 Piece(s)	7 Day(s)	10	Straight	Small Head	-	g6	Sharp Pointed Tip	Straight	16	-	10 ～ 100	10.01 ～ 14	-
-	1 Piece(s)	7 Day(s)	10	Straight	Large Head	-	g6	Sharp Pointed Tip	Straight	16	-	10 ～ 50	16 ～ 25	-
-	1 Piece(s)	7 Day(s)	10	Straight	Small Head	-	g6	Sharp Pointed Tip	Straight	20	-	10 ～ 100	-	-
-	1 Piece(s)	7 Day(s)	10	Straight	Small Head	-	g6	Sharp Pointed Tip	Straight	20	-	10 ～ 100	14.01 ～ 18	-
-	1 Piece(s)	7 Day(s)	10	Straight	Large Head	-	g6	Sharp Pointed Tip	Straight	20	-	10 ～ 50	20 ～ 30	-
-	1 Piece(s)	7 Day(s)	10	Straight	Small Head	-	g6	Sharp Pointed Tip	Straight	25	-	10 ～ 100	-	-
-	1 Piece(s)	7 Day(s)	10	Straight	Small Head	-	g6	Sharp Pointed Tip	Straight	25	-	10 ～ 100	18.01 ～ 20	-
-	1 Piece(s)	7 Day(s)	10	Straight	Small Head	-	g6	Sharp Pointed Tip	Straight	30	-	10 ～ 50	-	-
-	1 Piece(s)	7 Day(s)	10	Straight	Small Head	-	g6	Sharp Pointed Tip	Straight	30	-	10 ～ 50	20.01 ～ 25	-
-	1 Piece(s)	7 Day(s)	10	Stepped	Small Head	g6	-	Standard	Stepped	12	10 ～ 20	5 ～ 20	6 ～ 10	2 ～ 6
-	1 Piece(s)	7 Day(s)	10	Stepped	Large Head	g6	-	Standard	Stepped	12	10 ～ 40	5 ～ 20	12 ～ 20	3 ～ 16
-	1 Piece(s)	7 Day(s)	10	Stepped	Small Head	g6	-	Standard	Stepped	16	10 ～ 40	5 ～ 20	8 ～ 14	3 ～ 10
-	1 Piece(s)	7 Day(s)	10	Stepped	Large Head	g6	-	Standard	Stepped	16	10 ～ 40	5 ～ 20	16 ～ 25	6 ～ 21
-	1 Piece(s)	7 Day(s)	10	Stepped	Small Head	g6	-	Standard	Stepped	20	10 ～ 40	5 ～ 20	10 ～ 18	3 ～ 14
-	1 Piece(s)	7 Day(s)	10	Stepped	Large Head	g6	-	Standard	Stepped	20	10 ～ 40	5 ～ 20	20 ～ 30	10 ～ 26
-	1 Piece(s)	7 Day(s)	10	Stepped	Small Head	g6	-	Standard	Stepped	25	10 ～ 40	5 ～ 20	15 ～ 23	6 ～ 19
-	1 Piece(s)	7 Day(s)	10	Stepped	Small Head	g6	-	Standard	Stepped	30	10 ～ 40	5 ～ 20	20 ～ 28	10 ～ 24
-	1 Piece(s)	7 Day(s)	10	Straight	Small Head	-	g6	Sharp Pointed Tip	Hollow Tip	12	3 ～ 15	5 ～ 40	-	2 ～ 4
-	1 Piece(s)	7 Day(s)	10	Straight	Small Head	-	g6	Sharp Pointed Tip	Hollow Tip	16	3 ～ 30	5 ～ 40	-	3 ～ 6
-	1 Piece(s)	7 Day(s)	10	Straight	Small Head	-	g6	Sharp Pointed Tip	Hollow Tip	20	5 ～ 30	5 ～ 40	-	6 ～ 10
-	1 Piece(s)	7 Day(s)	10	Straight	Small Head	-	g6	Sharp Pointed Tip	Hollow Tip	25	5 ～ 35	5 ～ 40	-	8 ～ 14
-	1 Piece(s)	7 Day(s)	10	Straight	Small Head	-	g6	Sharp Pointed Tip	Hollow Tip	30	5 ～ 35	5 ～ 40	-	12 ～ 19
-	1 Piece(s)	7 Day(s)	10	Stepped	Small Head	g6	-	Sharp Pointed Tip	Stepped	12	10 ～ 20	5 ～ 20	6 ～ 10	2 ～ 6
-	1 Piece(s)	7 Day(s)	10	Stepped	Large Head	g6	-	Sharp Pointed Tip	Stepped	12	10 ～ 40	5 ～ 20	12 ～ 20	3 ～ 16
-	1 Piece(s)	7 Day(s)	10	Stepped	Small Head	g6	-	Sharp Pointed Tip	Stepped	16	10 ～ 40	5 ～ 20	8 ～ 14	3 ～ 10
-	1 Piece(s)	7 Day(s)	10	Stepped	Large Head	g6	-	Sharp Pointed Tip	Stepped	16	10 ～ 40	5 ～ 20	16 ～ 25	6 ～ 21
-	1 Piece(s)	7 Day(s)	10	Stepped	Small Head	g6	-	Sharp Pointed Tip	Stepped	20	10 ～ 40	5 ～ 20	10 ～ 18	3 ～ 14
-	1 Piece(s)	7 Day(s)	10	Stepped	Large Head	g6	-	Sharp Pointed Tip	Stepped	20	10 ～ 40	5 ～ 20	20 ～ 30	10 ～ 26
-	1 Piece(s)	7 Day(s)	10	Stepped	Small Head	g6	-	Sharp Pointed Tip	Stepped	25	10 ～ 40	5 ～ 20	15 ～ 23	6 ～ 19
-	1 Piece(s)	7 Day(s)	10	Stepped	Small Head	g6	-	Sharp Pointed Tip	Stepped	30	10 ～ 40	5 ～ 20	20 ～ 28	10 ～ 24
-	1 Piece(s)	7 Day(s)	10	Straight	Small Head	-	0/-0.02	Standard	Straight	12	-	10 ～ 100	6 ～ 10	-
-	1 Piece(s)	7 Day(s)	10	Straight	Large Head	-	0/-0.02	Standard	Straight	12	-	10 ～ 50	12 ～ 20	-
-	1 Piece(s)	7 Day(s)	10	Straight	Small Head	-	0/-0.02	Standard	Straight	16	-	10 ～ 100	-	-
-	1 Piece(s)	7 Day(s)	10	Straight	Small Head	-	0/-0.02	Standard	Straight	16	-	10 ～ 100	10.01 ～ 14	-
-	1 Piece(s)	7 Day(s)	10	Straight	Large Head	-	0/-0.02	Standard	Straight	16	-	10 ～ 50	16 ～ 25	-
-	1 Piece(s)	7 Day(s)	10	Straight	Small Head	-	0/-0.02	Standard	Straight	20	-	10 ～ 100	-	-
-	1 Piece(s)	7 Day(s)	10	Straight	Small Head	-	0/-0.02	Standard	Straight	20	-	10 ～ 100	14.01 ～ 18	-
-	1 Piece(s)	7 Day(s)	10	Straight	Large Head	-	0/-0.02	Standard	Straight	20	-	10 ～ 50	20 ～ 30	-
-	1 Piece(s)	7 Day(s)	10	Straight	Small Head	-	0/-0.02	Standard	Straight	25	-	10 ～ 100	-	-
-	1 Piece(s)	7 Day(s)	10	Straight	Small Head	-	0/-0.02	Standard	Straight	25	-	10 ～ 100	18.01 ～ 20	-
-	1 Piece(s)	7 Day(s)	10	Straight	Small Head	-	0/-0.02	Standard	Straight	30	-	10 ～ 50	-	-
-	1 Piece(s)	7 Day(s)	10	Straight	Small Head	-	0/-0.02	Standard	Straight	30	-	10 ～ 50	20.01 ～ 25	-
-	1 Piece(s)	7 Day(s)	10	Straight	Small Head	-	0/-0.02	Sharp Pointed Tip	Straight	12	-	10 ～ 100	6 ～ 10	-
-	1 Piece(s)	7 Day(s)	10	Straight	Large Head	-	0/-0.02	Sharp Pointed Tip	Straight	12	-	10 ～ 50	12 ～ 20	-
-	1 Piece(s)	7 Day(s)	10	Straight	Small Head	-	0/-0.02	Sharp Pointed Tip	Straight	16	-	10 ～ 100	10.01 ～ 14	-
-	1 Piece(s)	7 Day(s)	10	Straight	Large Head	-	0/-0.02	Sharp Pointed Tip	Straight	16	-	10 ～ 50	16 ～ 25	-
-	1 Piece(s)	7 Day(s)	10	Straight	Small Head	-	0/-0.02	Sharp Pointed Tip	Straight	20	-	10 ～ 100	-	-
-	1 Piece(s)	7 Day(s)	10	Straight	Small Head	-	0/-0.02	Sharp Pointed Tip	Straight	20	-	10 ～ 100	14.01 ～ 18	-
-	1 Piece(s)	7 Day(s)	10	Straight	Large Head	-	0/-0.02	Sharp Pointed Tip	Straight	20	-	10 ～ 50	20 ～ 30	-
-	1 Piece(s)	7 Day(s)	10	Straight	Small Head	-	0/-0.02	Sharp Pointed Tip	Straight	25	-	10 ～ 100	-	-
-	1 Piece(s)	7 Day(s)	10	Straight	Small Head	-	0/-0.02	Sharp Pointed Tip	Straight	25	-	10 ～ 100	18.01 ～ 20	-
-	1 Piece(s)	7 Day(s)	10	Straight	Small Head	-	0/-0.02	Sharp Pointed Tip	Straight	30	-	10 ～ 50	-	-
-	1 Piece(s)	7 Day(s)	10	Straight	Small Head	-	0/-0.02	Sharp Pointed Tip	Straight	30	-	10 ～ 50	20.01 ～ 25	-
-	1 Piece(s)	7 Day(s)	10	Stepped	Small Head	0/-0.02	-	Standard	Stepped	12	10 ～ 20	5 ～ 20	6 ～ 10	2 ～ 6
-	1 Piece(s)	7 Day(s)	10	Stepped	Large Head	0/-0.02	-	Standard	Stepped	12	10 ～ 40	5 ～ 20	12 ～ 20	3 ～ 16
-	1 Piece(s)	7 Day(s)	10	Stepped	Small Head	0/-0.02	-	Standard	Stepped	16	10 ～ 40	5 ～ 20	8 ～ 14	3 ～ 10
-	1 Piece(s)	7 Day(s)	10	Stepped	Large Head	0/-0.02	-	Standard	Stepped	16	10 ～ 40	5 ～ 20	16 ～ 25	6 ～ 21
-	1 Piece(s)	7 Day(s)	10	Stepped	Small Head	0/-0.02	-	Standard	Stepped	20	10 ～ 40	5 ～ 20	10 ～ 18	3 ～ 14
-	1 Piece(s)	7 Day(s)	10	Stepped	Large Head	0/-0.02	-	Standard	Stepped	20	10 ～ 40	5 ～ 20	20 ～ 30	10 ～ 26
-	1 Piece(s)	7 Day(s)	10	Stepped	Small Head	0/-0.02	-	Standard	Stepped	25	10 ～ 40	5 ～ 20	15 ～ 23	6 ～ 19
-	1 Piece(s)	7 Day(s)	10	Stepped	Small Head	0/-0.02	-	Standard	Stepped	30	10 ～ 40	5 ～ 20	20 ～ 28	10 ～ 24
-	1 Piece(s)	7 Day(s)	10	Stepped	Small Head	0/-0.02	-	Sharp Pointed Tip	Stepped	12	10 ～ 20	5 ～ 20	6 ～ 10	2 ～ 6
-	1 Piece(s)	7 Day(s)	10	Stepped	Large Head	0/-0.02	-	Sharp Pointed Tip	Stepped	12	10 ～ 40	5 ～ 20	12 ～ 20	3 ～ 16
-	1 Piece(s)	7 Day(s)	10	Stepped	Small Head	0/-0.02	-	Sharp Pointed Tip	Stepped	16	10 ～ 40	5 ～ 20	8 ～ 14	3 ～ 10
-	1 Piece(s)	7 Day(s)	10	Stepped	Large Head	0/-0.02	-	Sharp Pointed Tip	Stepped	16	10 ～ 40	5 ～ 20	16 ～ 25	6 ～ 21
-	1 Piece(s)	7 Day(s)	10	Stepped	Small Head	0/-0.02	-	Sharp Pointed Tip	Stepped	20	10 ～ 40	5 ～ 20	10 ～ 18	3 ～ 14
-	1 Piece(s)	7 Day(s)	10	Stepped	Large Head	0/-0.02	-	Sharp Pointed Tip	Stepped	20	10 ～ 40	5 ～ 20	20 ～ 30	10 ～ 26
-	1 Piece(s)	7 Day(s)	10	Stepped	Small Head	0/-0.02	-	Sharp Pointed Tip	Stepped	25	10 ～ 40	5 ～ 20	15 ～ 23	6 ～ 19
-	1 Piece(s)	7 Day(s)	10	Stepped	Small Head	0/-0.02	-	Sharp Pointed Tip	Stepped	30	10 ～ 40	5 ～ 20	20 ～ 28	10 ～ 24

Basic Information

Type	Marking Pin	Material	SKS3 Equivalent	Hardness	No Hardening

Configure

84 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

Shape
- Straight
- Stepped
Clear
Large Head / Small Head
- Large Head
- Small Head
Clear
S Dimension Tolerance on Insertion Part
- 0/-0.02
- g6
Clear
P Dimension Tolerance on Insertion Part
- 0/-0.02
- g6
Clear
Marking Pin Shape
- Sharp Pointed Tip
- Standard
Clear
Marking Pin Shape
- Hollow Tip
- Stepped
- Straight
Clear
Outer Dia. D(Ø)
12

16

20

25

30
Clear
B(mm)
[3-40/1mm Unit(s)]
Clear
L(mm)
[5-100/1mm Unit(s)]
Clear
P(mm)
[6-30/0.01mm Unit(s)]
Clear
S(mm)
[2-26/0.1mm Unit(s)]
Clear
type
- KJPGKH
- KJPGKHE
- KJPGKS
- KJPGKSC
- KJPGKSE
- KJPKH
- KJPKHE
- KJPKS
- KJPKSE
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

7 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Additional Products in this Category

Complementary Products

[High Precision] X-Axis Cross Roller - Micrometer Head
MISUMI Standard Price : MYR 804.71- Days to Ship : 6 Day(s) or more
Angles - Resin
MISUMI Days to Ship : -
Basic Guides - Standard
MISUMI Days to Ship : 9 Day(s) or more
Bushings for Locating Pins - Copper Alloy, Flanged
MISUMI Days to Ship : 8 Day(s) or more
Sheet Metal Bracket For 5 Series (Slot Width 6mm) Aluminum Frames - Bent-Shaped
MISUMI Standard Price : MYR 5.78- Days to Ship : 1 Day(s) or more

Customers Who Viewed This Item Also Viewed

Slot Pins for Inspection Components - Stepped Straight, Handle Length Fixed
MISUMI

Days to Ship : 7 Day(s)
Slot Pins for Inspection Components - Oval Straight / Stepped
MISUMI

Days to Ship : 4 Day(s) or more
Slot Pins for Inspection Components - Threaded, Tapered (Round / Rotating, Diamond-Shaped)
MISUMI

Days to Ship : 6 Day(s) or more
Bushings for Inspection Components - Straight - Standard Type
MISUMI

Days to Ship : 2 Day(s) or more
Bushings for Inspection Components - D-Shape - Straight
MISUMI

Days to Ship : 7 Day(s)
Bushings for Inspection Components - Stepped and Threaded for Straight Pins - For Straight
MISUMI

Days to Ship : 6 Day(s) or more
Slot Pins for Inspection Components - Straight, Handle Length Fixed
MISUMI

Days to Ship : 7 Day(s)
Bushings for Inspection Components - Oval - Straight (Dowel Pin / D Cut)
MISUMI

Days to Ship : 7 Day(s)
Slot Pins for Inspection Components - Tapered / Tapered, No Step
MISUMI

Days to Ship : 6 Day(s) or more
Slot Pins for Inspection Components - Straight Threaded with Step, 2-Step Type
MISUMI

Days to Ship : 6 Day(s) or more
Bushings for Inspection Components - Stepped and Threaded for Taper Pins - Tapered Type with Shoulder (Dowel Pin)
MISUMI

Days to Ship : 6 Day(s) or more
Slot Pins for Inspection Components - Clamp Type (Straight / Tapered) - Diamond / Round Tapered
MISUMI

Days to Ship : 7 Day(s)

back next

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations): Tel：(60) 3 7890 6399; 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday); Technical Inquiry

How can we improve?

Marking Pins - Straight, Stepped, Hollow Edge (Part Numbers)

Part Number

Basic Information

Configure

Specification/Dimensions

Shape

Large Head / Small Head

S Dimension Tolerance on Insertion Part

P Dimension Tolerance on Insertion Part

Marking Pin Shape

Marking Pin Shape

Outer Dia. D(Ø)

B(mm)

L(mm)

P(mm)

S(mm)

type

CAD

Days to Ship

Specify Alterations

Additional Products in this Category

Complementary Products

Customers Who Viewed This Item Also Viewed

Tech Support

Payment Method

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm, 9am – 1pm(Sat) * Order cut-off time is 12pm