(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Ball Splines - Both Ends Stepped Tapped (Part Numbers)
Click this image to zoom it.
Move the mouse over the image to zoom
ball spline with stepped female threads on both ends. This standard enables highly accurate linear motion and rotational torque transmission. In addition, the contact area between the ball groove machined into the shaft and the steel ball is large, resulting in a large load capacity and long life. Even a single axis can be used as a linear motion guide, allowing for a compact design.
A dustproof seal is attached to the nut, so the ball will not fall off even if the spline shaft is removed.
Part Number
Configured Part Number is shown.
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
| Part Number |
|---|
| BSLM8-[60-400/1]-F[2-30/1]-E[2-30/1]-P6-Q6-M3-N3 |
| BSLM8G-[60-400/1]-F[2-30/1]-E[2-30/1]-P6-Q6-M3-N3 |
| BSLM8L-[60-400/1]-F[2-30/1]-E[2-30/1]-P6-Q6-M3-N3 |
| BSLM10-[60-600/1]-F[2-31/1]-E[2-31/1]-P[6,8]-Q[6,8]-M[3,4]-N[3,4] |
| BSLM10G-[60-600/1]-F[2-31/1]-E[2-31/1]-P[6,8]-Q[6,8]-M[3,4]-N[3,4] |
| BSLM10L-[60-600/1]-F[2-31/1]-E[2-31/1]-P[6,8]-Q[6,8]-M[3,4]-N[3,4] |
| BSLM13-[60-600/1]-F[2-50/1]-E[2-50/1]-P[6,8,10]-Q[6,8,10]-M[3,4,5,6]-N[3,4,5,6] |
| BSLM13G-[60-600/1]-F[2-50/1]-E[2-50/1]-P[6,8,10]-Q[6,8,10]-M[3,4,5,6]-N[3,4,5,6] |
| BSLM13L-[60-600/1]-F[2-50/1]-E[2-50/1]-P[6,8,10]-Q[6,8,10]-M[3,4,5,6]-N[3,4,5,6] |
| BSLM16-[70-600/1]-F[2-65/1]-E[2-65/1]-P[6,8,10,12,13]-Q[6,8,10,12,13]-M[3,4,5,6,8,10]-N[3,4,5,6,8,10] |
| BSLM16G-[70-600/1]-F[2-65/1]-E[2-65/1]-P[6,8,10,12,13]-Q[6,8,10,12,13]-M[3,4,5,6,8,10]-N[3,4,5,6,8,10] |
| BSLM16L-[70-600/1]-F[2-65/1]-E[2-65/1]-P[6,8,10,12,13]-Q[6,8,10,12,13]-M[3,4,5,6,8,10]-N[3,4,5,6,8,10] |
| BSLM20-[80-700/1]-F[2-80/1]-E[2-80/1]-P[8,10,12,13,15,16]-Q[8,10,12,13,15,16]-M[4,5,6,8,10,12]-N[4,5,6,8,10,12] |
| BSLM20G-[80-700/1]-F[2-80/1]-E[2-80/1]-P[8,10,12,13,15,16]-Q[8,10,12,13,15,16]-M[4,5,6,8,10,12]-N[4,5,6,8,10,12] |
| BSLM20L-[80-700/1]-F[2-80/1]-E[2-80/1]-P[8,10,12,13,15,16]-Q[8,10,12,13,15,16]-M[4,5,6,8,10,12]-N[4,5,6,8,10,12] |
| BSLM25-[90-900/1]-F[2-100/1]-E[2-100/1]-P[8,10,12,13,15,16,20]-Q[8,10,12,13,15,16,20]-M[4,5,6,8,10,12,16]-N[4,5,6,8,10,12,16] |
| BSLM25G-[90-900/1]-F[2-100/1]-E[2-100/1]-P[8,10,12,13,15,16,20]-Q[8,10,12,13,15,16,20]-M[4,5,6,8,10,12,16]-N[4,5,6,8,10,12,16] |
| BSLM25L-[90-900/1]-F[2-100/1]-E[2-100/1]-P[8,10,12,13,15,16,20]-Q[8,10,12,13,15,16,20]-M[4,5,6,8,10,12,16]-N[4,5,6,8,10,12,16] |
| BSLM30-[100-1150/1]-F[2-125/1]-E[2-125/1]-P[10,12,13,15,16,20,25]-Q[10,12,13,15,16,20,25]-M[4,5,6,8,10,12,16,20]-N[4,5,6,8,10,12,16,20] |
| BSLM30G-[100-1150/1]-F[2-125/1]-E[2-125/1]-P[10,12,13,15,16,20,25]-Q[10,12,13,15,16,20,25]-M[4,5,6,8,10,12,16,20]-N[4,5,6,8,10,12,16,20] |
| BSLM30L-[100-1150/1]-F[2-125/1]-E[2-125/1]-P[10,12,13,15,16,20,25]-Q[10,12,13,15,16,20,25]-M[4,5,6,8,10,12,16,20]-N[4,5,6,8,10,12,16,20] |
| BSLMS8-[60-190/1]-F[2-30/1]-E[2-30/1]-P6-Q6-M3-N3 |
| BSLMS8G-[60-190/1]-F[2-30/1]-E[2-30/1]-P6-Q6-M3-N3 |
| BSLMS8L-[60-190/1]-F[2-30/1]-E[2-30/1]-P6-Q6-M3-N3 |
| BSLMS10-[60-390/1]-F[2-40/1]-E[2-40/1]-P[6,8]-Q[6,8]-M[3,4]-N[3,4] |
| BSLMS10G-[60-390/1]-F[2-31/1]-E[2-31/1]-P[6,8]-Q[6,8]-M[3,4]-N[3,4] |
| BSLMS10L-[60-390/1]-F[2-31/1]-E[2-31/1]-P[6,8]-Q[6,8]-M[3,4]-N[3,4] |
| BSLMS13-[60-390/1]-F[2-50/1]-E[2-51/1]-P[6,8,10]-Q[6,8,10]-M[3,4,5,6]-N[3,4,5,6] |
| BSLMS13G-[60-390/1]-F[2-50/1]-E[2-50/1]-P[6,8,10]-Q[6,8,10]-M[3,4,5,6]-N[3,4,5,6] |
| BSLMS13L-[60-390/1]-F[2-50/1]-E[2-50/1]-P[6,8,10]-Q[6,8,10]-M[3,4,5,6]-N[3,4,5,6] |
| BSLMS16-[70-390/1]-F[2-65/1]-E[2-65/1]-P[6,8,10,12,13]-Q[6,8,10,12,13]-M[3,4,5,6,8,10]-N[3,4,5,6,8,10] |
| BSLMS16G-[70-390/1]-F[2-65/1]-E[2-65/1]-P[6,8,10,12,13]-Q[6,8,10,12,13]-M[3,4,5,6,8,10]-N[3,4,5,6,8,10] |
| BSLMS16L-[70-390/1]-F[2-65/1]-E[2-65/1]-P[6,8,10,12,13]-Q[6,8,10,12,13]-M[3,4,5,6,8,10]-N[3,4,5,6,8,10] |
| BSLN8-[60-400/1]-F[2-30/1]-E[2-30/1]-P6-Q6-M3-N3 |
| BSLN8G-[60-400/1]-F[2-30/1]-E[2-30/1]-P6-Q6-M3-N3 |
| BSLN8L-[60-400/1]-F[2-30/1]-E[2-30/1]-P6-Q6-M3-N3 |
| BSLN10-[60-600/1]-F[2-40/1]-E[2-40/1]-P[6,8]-Q[6,8]-M[3,4]-N[3,4] |
| BSLN10G-[60-600/1]-F[2-31/1]-E[2-31/1]-P[6,8]-Q[6,8]-M[3,4]-N[3,4] |
| BSLN10L-[60-600/1]-F[2-31/1]-E[2-31/1]-P[6,8]-Q[6,8]-M[3,4]-N[3,4] |
| BSLS8-[60-400/1]-F[2-30/1]-E[2-30/1]-P6-Q6-M3-N3 |
| BSLS8G-[60-400/1]-F[2-30/1]-E[2-30/1]-P6-Q6-M3-N3 |
| BSLS8L-[60-400/1]-F[2-30/1]-E[2-30/1]-P6-Q6-M3-N3 |
| BSLS10-[60-600/1]-F[2-40/1]-E[2-40/1]-P[6,8]-Q[6,8]-M[3,4]-N[3,4] |
| BSLS10G-[60-600/1]-F[2-31/1]-E[2-31/1]-P[6,8]-Q[6,8]-M[3,4]-N[3,4] |
| BSLS10L-[60-600/1]-F[2-31/1]-E[2-31/1]-P[6,8]-Q[6,8]-M[3,4]-N[3,4] |
| BSLS13-[60-600/1]-F[2-50/1]-E[2-50/1]-P[6,8,10]-Q[6,8,10]-M[3,4,5,6]-N[3,4,5,6] |
| BSLS13G-[60-600/1]-F[2-50/1]-E[2-50/1]-P[6,8,10]-Q[6,8,10]-M[3,4,5,6]-N[3,4,5,6] |
| BSLS13L-[60-600/1]-F[2-50/1]-E[2-50/1]-P[6,8,10]-Q[6,8,10]-M[3,4,5,6]-N[3,4,5,6] |
| BSLS16-[70-600/1]-F[2-65/1]-E[2-65/1]-P[6,8,10,12,13]-Q[6,8,10,12,13]-M[3,4,5,6,8,10]-N[3,4,5,6,8,10] |
| BSLS16G-[70-600/1]-F[2-65/1]-E[2-65/1]-P[6,8,10,12,13]-Q[6,8,10,12,13]-M[3,4,5,6,8,10]-N[3,4,5,6,8,10] |
| BSLS16L-[70-600/1]-F[2-65/1]-E[2-65/1]-P[6,8,10,12,13]-Q[6,8,10,12,13]-M[3,4,5,6,8,10]-N[3,4,5,6,8,10] |
| BSLS20-[80-700/1]-F[2-80/1]-E[2-80/1]-P[8,10,12,13,15,16]-Q[8,10,12,13,15,16]-M[4,5,6,8,10,12]-N[4,5,6,8,10,12] |
| BSLS20G-[80-700/1]-F[2-80/1]-E[2-80/1]-P[8,10,12,13,15,16]-Q[8,10,12,13,15,16]-M[4,5,6,8,10,12]-N[4,5,6,8,10,12] |
| BSLS20L-[80-700/1]-F[2-80/1]-E[2-80/1]-P[8,10,12,13,15,16]-Q[8,10,12,13,15,16]-M[4,5,6,8,10,12]-N[4,5,6,8,10,12] |
| BSLS25-[90-900/1]-F[2-100/1]-E[2-100/1]-P[8,10,12,13,15,16,20]-Q[8,10,12,13,15,16,20]-M[4,5,6,8,10,12,16]-N[4,5,6,8,10,12,16] |
| BSLS25G-[90-900/1]-F[2-100/1]-E[2-100/1]-P[8,10,12,13,15,16,20]-Q[8,10,12,13,15,16,20]-M[4,5,6,8,10,12,16]-N[4,5,6,8,10,12,16] |
| BSLS25L-[90-900/1]-F[2-100/1]-E[2-100/1]-P[8,10,12,13,15,16,20]-Q[8,10,12,13,15,16,20]-M[4,5,6,8,10,12,16]-N[4,5,6,8,10,12,16] |
| BSLS30-[100-1150/1]-F[2-125/1]-E[2-125/1]-P[10,12,13,15,16,20,25]-Q[10,12,13,15,16,20,25]-M[4,5,6,8,10,12,16,20]-N[4,5,6,8,10,12,16,20] |
| BSLS30G-[100-1150/1]-F[2-125/1]-E[2-125/1]-P[10,12,13,15,16,20,25]-Q[10,12,13,15,16,20,25]-M[4,5,6,8,10,12,16,20]-N[4,5,6,8,10,12,16,20] |
| BSLS30L-[100-1150/1]-F[2-125/1]-E[2-125/1]-P[10,12,13,15,16,20,25]-Q[10,12,13,15,16,20,25]-M[4,5,6,8,10,12,16,20]-N[4,5,6,8,10,12,16,20] |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | RoHS | Nut Type | Shaft Outer Dia. D (Ø) | Nut Overall Length (mm) | Nut O.D. (Ø) | Shaft material | Shaft Overall Length L (mm) | Basic Load Rating: Dynamic Load (N) | Allowable Torque (N•m) | Nut Material | Grease | E (mm) | F (mm) | M (mm) | N (mm) | P (mm) | Q (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 Piece(s) | 9 Day(s) or more | 10 | [Flanged Type] Round Flange | 8 | 25 | 16 | SUJ2 Equivalent | 60 ～ 400 | 1200 | 4.8 | SCM415 Equivalent | Standard (S2) | 2 ～ 30 | 2 ～ 30 | 3 | 3 | 6 | 6 | ||
- | 1 Piece(s) | 11 Day(s) or more | 10 | [Flanged Type] Round Flange | 8 | 25 | 16 | SUJ2 Equivalent | 60 ～ 400 | 1200 | 4.8 | SCM415 Equivalent | LG2 | 2 ～ 30 | 2 ～ 30 | 3 | 3 | 6 | 6 | ||
- | 1 Piece(s) | 11 Day(s) or more | 10 | [Flanged Type] Round Flange | 8 | 25 | 16 | SUJ2 Equivalent | 60 ～ 400 | 1200 | 4.8 | SCM415 Equivalent | ET-100K | 2 ～ 30 | 2 ～ 30 | 3 | 3 | 6 | 6 | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | [Flanged Type] Round Flange | 10.4 | 40 | 21 | SUJ2 Equivalent | 60 ～ 600 | 3800 | 19 | SCM415 Equivalent | Standard (S2) | 2 ～ 31 | 2 ～ 31 | 3 ～ 4 | 3 ～ 4 | 6 ～ 8 | 6 ～ 8 | ||
- | 1 Piece(s) | 11 Day(s) or more | 10 | [Flanged Type] Round Flange | 10.4 | 40 | 21 | SUJ2 Equivalent | 60 ～ 600 | 3800 | 19 | SCM415 Equivalent | LG2 | 2 ～ 31 | 2 ～ 31 | 3 ～ 4 | 3 ～ 4 | 6 ～ 8 | 6 ～ 8 | ||
- | 1 Piece(s) | 11 Day(s) or more | 10 | [Flanged Type] Round Flange | 10.4 | 40 | 21 | SUJ2 Equivalent | 60 ～ 600 | 3800 | 19 | SCM415 Equivalent | ET-100K | 2 ～ 31 | 2 ～ 31 | 3 ～ 4 | 3 ～ 4 | 6 ～ 8 | 6 ～ 8 | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | [Flanged Type] Round Flange | 13.4 | 44 | 24 | SUJ2 Equivalent | 60 ～ 600 | 4600 | 28 | SCM415 Equivalent | Standard (S2) | 2 ～ 50 | 2 ～ 50 | 3 ～ 6 | 3 ～ 6 | 6 ～ 10 | 6 ～ 10 | ||
- | 1 Piece(s) | 11 Day(s) or more | 10 | [Flanged Type] Round Flange | 13.4 | 44 | 24 | SUJ2 Equivalent | 60 ～ 600 | 4600 | 28 | SCM415 Equivalent | LG2 | 2 ～ 50 | 2 ～ 50 | 3 ～ 6 | 3 ～ 6 | 6 ～ 10 | 6 ～ 10 | ||
- | 1 Piece(s) | 11 Day(s) or more | 10 | [Flanged Type] Round Flange | 13.4 | 44 | 24 | SUJ2 Equivalent | 60 ～ 600 | 4600 | 28 | SCM415 Equivalent | ET-100K | 2 ～ 50 | 2 ～ 50 | 3 ～ 6 | 3 ～ 6 | 6 ～ 10 | 6 ～ 10 | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | [Flanged Type] Round Flange | 16.6 | 50 | 31 | SUJ2 Equivalent | 70 ～ 600 | 6200 | 51 | SCM415 Equivalent | Standard (S2) | 2 ～ 65 | 2 ～ 65 | 3 ～ 10 | 3 ～ 10 | 6 ～ 13 | 6 ～ 13 | ||
- | 1 Piece(s) | 11 Day(s) or more | 10 | [Flanged Type] Round Flange | 16.6 | 50 | 31 | SUJ2 Equivalent | 70 ～ 600 | 6200 | 51 | SCM415 Equivalent | LG2 | 2 ～ 65 | 2 ～ 65 | 3 ～ 10 | 3 ～ 10 | 6 ～ 13 | 6 ～ 13 | ||
- | 1 Piece(s) | 11 Day(s) or more | 10 | [Flanged Type] Round Flange | 16.6 | 50 | 31 | SUJ2 Equivalent | 70 ～ 600 | 6200 | 51 | SCM415 Equivalent | ET-100K | 2 ～ 65 | 2 ～ 65 | 3 ～ 10 | 3 ～ 10 | 6 ～ 13 | 6 ～ 13 | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | [Flanged Type] Round Flange | 20.6 | 63 | 35 | SUJ2 Equivalent | 80 ～ 700 | 8500 | 85 | SCM415 Equivalent | Standard (S2) | 2 ～ 80 | 2 ～ 80 | 4 ～ 12 | 4 ～ 12 | 8 ～ 16 | 8 ～ 16 | ||
- | 1 Piece(s) | 11 Day(s) or more | 10 | [Flanged Type] Round Flange | 20.6 | 63 | 35 | SUJ2 Equivalent | 80 ～ 700 | 8500 | 85 | SCM415 Equivalent | LG2 | 2 ～ 80 | 2 ～ 80 | 4 ～ 12 | 4 ～ 12 | 8 ～ 16 | 8 ～ 16 | ||
- | 1 Piece(s) | 11 Day(s) or more | 10 | [Flanged Type] Round Flange | 20.6 | 63 | 35 | SUJ2 Equivalent | 80 ～ 700 | 8500 | 85 | SCM415 Equivalent | ET-100K | 2 ～ 80 | 2 ～ 80 | 4 ～ 12 | 4 ～ 12 | 8 ～ 16 | 8 ～ 16 | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | [Flanged Type] Round Flange | 25.8 | 71 | 42 | SUJ2 Equivalent | 90 ～ 900 | 15400 | 193 | SCM415 Equivalent | Standard (S2) | 2 ～ 100 | 2 ～ 100 | 4 ～ 16 | 4 ～ 16 | 8 ～ 20 | 8 ～ 20 | ||
- | 1 Piece(s) | 11 Day(s) or more | 10 | [Flanged Type] Round Flange | 25.8 | 71 | 42 | SUJ2 Equivalent | 90 ～ 900 | 15400 | 193 | SCM415 Equivalent | LG2 | 2 ～ 100 | 2 ～ 100 | 4 ～ 16 | 4 ～ 16 | 8 ～ 20 | 8 ～ 20 | ||
- | 1 Piece(s) | 11 Day(s) or more | 10 | [Flanged Type] Round Flange | 25.8 | 71 | 42 | SUJ2 Equivalent | 90 ～ 900 | 15400 | 193 | SCM415 Equivalent | ET-100K | 2 ～ 100 | 2 ～ 100 | 4 ～ 16 | 4 ～ 16 | 8 ～ 20 | 8 ～ 20 | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | [Flanged Type] Round Flange | 30.8 | 80 | 47 | SUJ2 Equivalent | 100 ～ 1150 | 18500 | 272 | SCM415 Equivalent | Standard (S2) | 2 ～ 125 | 2 ～ 125 | 4 ～ 20 | 4 ～ 20 | 10 ～ 25 | 10 ～ 25 | ||
- | 1 Piece(s) | 11 Day(s) or more | 10 | [Flanged Type] Round Flange | 30.8 | 80 | 47 | SUJ2 Equivalent | 100 ～ 1150 | 18500 | 272 | SCM415 Equivalent | LG2 | 2 ～ 125 | 2 ～ 125 | 4 ～ 20 | 4 ～ 20 | 10 ～ 25 | 10 ～ 25 | ||
- | 1 Piece(s) | 11 Day(s) or more | 10 | [Flanged Type] Round Flange | 30.8 | 80 | 47 | SUJ2 Equivalent | 100 ～ 1150 | 18500 | 272 | SCM415 Equivalent | ET-100K | 2 ～ 125 | 2 ～ 125 | 4 ～ 20 | 4 ～ 20 | 10 ～ 25 | 10 ～ 25 | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | [Flanged Type] Round Flange | 8 | 25 | 16 | SUS440C Equivalent | 60 ～ 190 | 1200 | 4.8 | SUS440C Equivalent | Standard (S2) | 2 ～ 30 | 2 ～ 30 | 3 | 3 | 6 | 6 | ||
- | 1 Piece(s) | 10 Day(s) or more | 10 | [Flanged Type] Round Flange | 8 | 25 | 16 | SUS440C Equivalent | 60 ～ 190 | 1200 | 4.8 | SUS440C Equivalent | LG2 | 2 ～ 30 | 2 ～ 30 | 3 | 3 | 6 | 6 | ||
- | 1 Piece(s) | 10 Day(s) or more | 10 | [Flanged Type] Round Flange | 8 | 25 | 16 | SUS440C Equivalent | 60 ～ 190 | 1200 | 4.8 | SUS440C Equivalent | ET-100K | 2 ～ 30 | 2 ～ 30 | 3 | 3 | 6 | 6 | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | [Flanged Type] Round Flange | 10.4 | 33 | 21 | SUS440C Equivalent | 60 ～ 390 | 2400 | 11 | SUS440C Equivalent | Standard (S2) | 2 ～ 40 | 2 ～ 40 | 3 ～ 4 | 3 ～ 4 | 6 ～ 8 | 6 ～ 8 | ||
- | 1 Piece(s) | 10 Day(s) or more | 10 | [Flanged Type] Round Flange | 10.4 | 33 | 21 | SUS440C Equivalent | 60 ～ 390 | 2400 | 11 | SUS440C Equivalent | LG2 | 2 ～ 31 | 2 ～ 31 | 3 ～ 4 | 3 ～ 4 | 6 ～ 8 | 6 ～ 8 | ||
- | 1 Piece(s) | 10 Day(s) or more | 10 | [Flanged Type] Round Flange | 10.4 | 33 | 21 | SUS440C Equivalent | 60 ～ 390 | 2400 | 11 | SUS440C Equivalent | ET-100K | 2 ～ 31 | 2 ～ 31 | 3 ～ 4 | 3 ～ 4 | 6 ～ 8 | 6 ～ 8 | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | [Flanged Type] Round Flange | 13.4 | 36 | 24 | SUS440C Equivalent | 60 ～ 390 | 3300 | 20 | SUS440C Equivalent | Standard (S2) | 2 ～ 51 | 2 ～ 50 | 3 ～ 6 | 3 ～ 6 | 6 ～ 10 | 6 ～ 10 | ||
- | 1 Piece(s) | 10 Day(s) or more | 10 | [Flanged Type] Round Flange | 13.4 | 36 | 24 | SUS440C Equivalent | 60 ～ 390 | 3300 | 20 | SUS440C Equivalent | LG2 | 2 ～ 50 | 2 ～ 50 | 3 ～ 6 | 3 ～ 6 | 6 ～ 10 | 6 ～ 10 | ||
- | 1 Piece(s) | 10 Day(s) or more | 10 | [Flanged Type] Round Flange | 13.4 | 36 | 24 | SUS440C Equivalent | 60 ～ 390 | 3300 | 20 | SUS440C Equivalent | ET-100K | 2 ～ 50 | 2 ～ 50 | 3 ～ 6 | 3 ～ 6 | 6 ～ 10 | 6 ～ 10 | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | [Flanged Type] Round Flange | 16.6 | 50 | 31 | SUS440C Equivalent | 70 ～ 390 | 6200 | 51 | SUS440C Equivalent | Standard (S2) | 2 ～ 65 | 2 ～ 65 | 3 ～ 10 | 3 ～ 10 | 6 ～ 13 | 6 ～ 13 | ||
- | 1 Piece(s) | 10 Day(s) or more | 10 | [Flanged Type] Round Flange | 16.6 | 50 | 31 | SUS440C Equivalent | 70 ～ 390 | 6200 | 51 | SUS440C Equivalent | LG2 | 2 ～ 65 | 2 ～ 65 | 3 ～ 10 | 3 ～ 10 | 6 ～ 13 | 6 ～ 13 | ||
- | 1 Piece(s) | 10 Day(s) or more | 10 | [Flanged Type] Round Flange | 16.6 | 50 | 31 | SUS440C Equivalent | 70 ～ 390 | 6200 | 51 | SUS440C Equivalent | ET-100K | 2 ～ 65 | 2 ～ 65 | 3 ～ 10 | 3 ～ 10 | 6 ～ 13 | 6 ～ 13 | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | [Flanged Type] Compact Flange | 8 | 25 | 16 | SUJ2 Equivalent | 60 ～ 400 | 1200 | 4.8 | SCM415 Equivalent | Standard (S2) | 2 ～ 30 | 2 ～ 30 | 3 | 3 | 6 | 6 | ||
- | 1 Piece(s) | 11 Day(s) or more | 10 | [Flanged Type] Compact Flange | 8 | 25 | 16 | SUJ2 Equivalent | 60 ～ 400 | 1200 | 4.8 | SCM415 Equivalent | LG2 | 2 ～ 30 | 2 ～ 30 | 3 | 3 | 6 | 6 | ||
- | 1 Piece(s) | 11 Day(s) or more | 10 | [Flanged Type] Compact Flange | 8 | 25 | 16 | SUJ2 Equivalent | 60 ～ 400 | 1200 | 4.8 | SCM415 Equivalent | ET-100K | 2 ～ 30 | 2 ～ 30 | 3 | 3 | 6 | 6 | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | [Flanged Type] Compact Flange | 10.4 | 40 | 21 | SUJ2 Equivalent | 60 ～ 600 | 3800 | 19 | SCM415 Equivalent | Standard (S2) | 2 ～ 40 | 2 ～ 40 | 3 ～ 4 | 3 ～ 4 | 6 ～ 8 | 6 ～ 8 | ||
- | 1 Piece(s) | 11 Day(s) or more | 10 | [Flanged Type] Compact Flange | 10.4 | 40 | 21 | SUJ2 Equivalent | 60 ～ 600 | 3800 | 19 | SCM415 Equivalent | LG2 | 2 ～ 31 | 2 ～ 31 | 3 ～ 4 | 3 ～ 4 | 6 ～ 8 | 6 ～ 8 | ||
- | 1 Piece(s) | 11 Day(s) or more | 10 | [Flanged Type] Compact Flange | 10.4 | 40 | 21 | SUJ2 Equivalent | 60 ～ 600 | 3800 | 19 | SCM415 Equivalent | ET-100K | 2 ～ 31 | 2 ～ 31 | 3 ～ 4 | 3 ～ 4 | 6 ～ 8 | 6 ～ 8 | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | Straight | 8 | 25 | 16 | SUJ2 Equivalent | 60 ～ 400 | 1200 | 4.8 | SCM415 Equivalent | Standard (S2) | 2 ～ 30 | 2 ～ 30 | 3 | 3 | 6 | 6 | ||
- | 1 Piece(s) | 11 Day(s) or more | 10 | Straight | 8 | 25 | 16 | SUJ2 Equivalent | 60 ～ 400 | 1200 | 4.8 | SCM415 Equivalent | LG2 | 2 ～ 30 | 2 ～ 30 | 3 | 3 | 6 | 6 | ||
- | 1 Piece(s) | 11 Day(s) or more | 10 | Straight | 8 | 25 | 16 | SUJ2 Equivalent | 60 ～ 400 | 1200 | 4.8 | SCM415 Equivalent | ET-100K | 2 ～ 30 | 2 ～ 30 | 3 | 3 | 6 | 6 | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | Straight | 10.4 | 40 | 21 | SUJ2 Equivalent | 60 ～ 600 | 3800 | 19 | SCM415 Equivalent | Standard (S2) | 2 ～ 40 | 2 ～ 40 | 3 ～ 4 | 3 ～ 4 | 6 ～ 8 | 6 ～ 8 | ||
- | 1 Piece(s) | 11 Day(s) or more | 10 | Straight | 10.4 | 40 | 21 | SUJ2 Equivalent | 60 ～ 600 | 3800 | 19 | SCM415 Equivalent | LG2 | 2 ～ 31 | 2 ～ 31 | 3 ～ 4 | 3 ～ 4 | 6 ～ 8 | 6 ～ 8 | ||
- | 1 Piece(s) | 11 Day(s) or more | 10 | Straight | 10.4 | 40 | 21 | SUJ2 Equivalent | 60 ～ 600 | 3800 | 19 | SCM415 Equivalent | ET-100K | 2 ～ 31 | 2 ～ 31 | 3 ～ 4 | 3 ～ 4 | 6 ～ 8 | 6 ～ 8 | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | Straight | 13.4 | 44 | 24 | SUJ2 Equivalent | 60 ～ 600 | 4600 | 28 | SCM415 Equivalent | Standard (S2) | 2 ～ 50 | 2 ～ 50 | 3 ～ 6 | 3 ～ 6 | 6 ～ 10 | 6 ～ 10 | ||
- | 1 Piece(s) | 11 Day(s) or more | 10 | Straight | 13.4 | 44 | 24 | SUJ2 Equivalent | 60 ～ 600 | 4600 | 28 | SCM415 Equivalent | LG2 | 2 ～ 50 | 2 ～ 50 | 3 ～ 6 | 3 ～ 6 | 6 ～ 10 | 6 ～ 10 | ||
- | 1 Piece(s) | 11 Day(s) or more | 10 | Straight | 13.4 | 44 | 24 | SUJ2 Equivalent | 60 ～ 600 | 4600 | 28 | SCM415 Equivalent | ET-100K | 2 ～ 50 | 2 ～ 50 | 3 ～ 6 | 3 ～ 6 | 6 ～ 10 | 6 ～ 10 | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | Straight | 16.6 | 50 | 31 | SUJ2 Equivalent | 70 ～ 600 | 6200 | 51 | SCM415 Equivalent | Standard (S2) | 2 ～ 65 | 2 ～ 65 | 3 ～ 10 | 3 ～ 10 | 6 ～ 13 | 6 ～ 13 | ||
- | 1 Piece(s) | 11 Day(s) or more | 10 | Straight | 16.6 | 50 | 31 | SUJ2 Equivalent | 70 ～ 600 | 6200 | 51 | SCM415 Equivalent | LG2 | 2 ～ 65 | 2 ～ 65 | 3 ～ 10 | 3 ～ 10 | 6 ～ 13 | 6 ～ 13 | ||
- | 1 Piece(s) | 11 Day(s) or more | 10 | Straight | 16.6 | 50 | 31 | SUJ2 Equivalent | 70 ～ 600 | 6200 | 51 | SCM415 Equivalent | ET-100K | 2 ～ 65 | 2 ～ 65 | 3 ～ 10 | 3 ～ 10 | 6 ～ 13 | 6 ～ 13 | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | Straight | 20.6 | 63 | 35 | SUJ2 Equivalent | 80 ～ 700 | 8500 | 85 | SCM415 Equivalent | Standard (S2) | 2 ～ 80 | 2 ～ 80 | 4 ～ 12 | 4 ～ 12 | 8 ～ 16 | 8 ～ 16 | ||
- | 1 Piece(s) | 11 Day(s) or more | 10 | Straight | 20.6 | 63 | 35 | SUJ2 Equivalent | 80 ～ 700 | 8500 | 85 | SCM415 Equivalent | LG2 | 2 ～ 80 | 2 ～ 80 | 4 ～ 12 | 4 ～ 12 | 8 ～ 16 | 8 ～ 16 | ||
- | 1 Piece(s) | 11 Day(s) or more | 10 | Straight | 20.6 | 63 | 35 | SUJ2 Equivalent | 80 ～ 700 | 8500 | 85 | SCM415 Equivalent | ET-100K | 2 ～ 80 | 2 ～ 80 | 4 ～ 12 | 4 ～ 12 | 8 ～ 16 | 8 ～ 16 | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | Straight | 25.8 | 71 | 42 | SUJ2 Equivalent | 90 ～ 900 | 15400 | 193 | SCM415 Equivalent | Standard (S2) | 2 ～ 100 | 2 ～ 100 | 4 ～ 16 | 4 ～ 16 | 8 ～ 20 | 8 ～ 20 | ||
- | 1 Piece(s) | 11 Day(s) or more | 10 | Straight | 25.8 | 71 | 42 | SUJ2 Equivalent | 90 ～ 900 | 15400 | 193 | SCM415 Equivalent | LG2 | 2 ～ 100 | 2 ～ 100 | 4 ～ 16 | 4 ～ 16 | 8 ～ 20 | 8 ～ 20 | ||
- | 1 Piece(s) | 11 Day(s) or more | 10 | Straight | 25.8 | 71 | 42 | SUJ2 Equivalent | 90 ～ 900 | 15400 | 193 | SCM415 Equivalent | ET-100K | 2 ～ 100 | 2 ～ 100 | 4 ～ 16 | 4 ～ 16 | 8 ～ 20 | 8 ～ 20 | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | Straight | 30.8 | 80 | 47 | SUJ2 Equivalent | 100 ～ 1150 | 18500 | 272 | SCM415 Equivalent | Standard (S2) | 2 ～ 125 | 2 ～ 125 | 4 ～ 20 | 4 ～ 20 | 10 ～ 25 | 10 ～ 25 | ||
- | 1 Piece(s) | 11 Day(s) or more | 10 | Straight | 30.8 | 80 | 47 | SUJ2 Equivalent | 100 ～ 1150 | 18500 | 272 | SCM415 Equivalent | LG2 | 2 ～ 125 | 2 ～ 125 | 4 ～ 20 | 4 ～ 20 | 10 ～ 25 | 10 ～ 25 | ||
- | 1 Piece(s) | 11 Day(s) or more | 10 | Straight | 30.8 | 80 | 47 | SUJ2 Equivalent | 100 ～ 1150 | 18500 | 272 | SCM415 Equivalent | ET-100K | 2 ～ 125 | 2 ～ 125 | 4 ～ 20 | 4 ～ 20 | 10 ～ 25 | 10 ～ 25 |
Loading...
Basic Information
| Type | Solid Shaft | Nut Length | Standard | Preload | Standard |
|---|---|---|---|---|---|
| Accuracy Grade | Standard Grade | End Shape (Left) | Stepped and Tapped | End Shape (Right) | Stepped and Tapped |
| Torque | Middle Torque | Ball Recirculating Type | Single |
Specification/Dimensions
-
Nut Type
- Straight
- Flanged Type
-
Shaft Outer Dia. D(Ø)
-
Nut Overall Length(mm)
-
Nut O.D.(Ø)
-
Shaft material
- SUS440C Equivalent
- SUJ2 Equivalent
-
Shaft Overall Length L(mm)
-
Nut Material
- SCM415 Equivalent
- SUS440C Equivalent
-
Grease
- ET-100K
- LG2
- Standard (S2)
-
E(mm)
-
F(mm)
-
M(mm)
-
N(mm)
-
P(mm)
-
Q(mm)
-
type
- BSLM
- BSLMS
- BSLN
- BSLS
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 8 Day(s) or Less
- 9 Day(s) or Less
- 10 Day(s) or Less
- 11 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Ball Splines - One End Stepped
- Ball Splines Round Flanged, One End Stepped
- Ball Splines Round Flanged, One End Double Stepped and Threaded
- Ball Splines-Hollow Type, Round Flanged
- High Torque Flange Type Ball Spline Model LBF (Medium Load Type)
- Medium-Torque Type, Flange Type Ball Spline, LF Type
- Spline Nut
- Economy Ball Spline Double Type
Complementary Products
-
Shaft Supports - T-Shaped Slit (Cast Type) - Standard
MISUMI Standard Price : MYR 28.17- Days to Ship : 1 Day(s) or more
-
Height-adjusting Spacers for Flanged Bushings
MISUMI Standard Price : MYR 22.00- Days to Ship : 4 Day(s) or more
Customers Who Viewed This Item Also Viewed
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy