(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Free Angle Brackets - For 8 Series (Slot Width 10mm) Aluminum Frames (Part Numbers)
- Volume Discount
When connecting the frame, it can be connected at any angle. This product cannot be used alone. Please select 2 models for use in combination.
Part Number
Configured Part Number is shown.
Dimensional Drawing of Angular Brackets
Frame side mounting type Angular Brackets HBLTBA40(1 unit will be delivered for an order of 1 unit)Frame cross section mounting type
HBLTBBN40(1 unit will be delivered for an order of 1 unit)Clamp lever type
HBLTBC40(One each of ① and ③ will be delivered for an order of 1 unit)
HBLTBD40(One each of ② and ③ will be delivered for an order of 1 unit)1) Frame side mounting type②Frame cross section mounting type③Frame cross section mounting type
(base)
| Angular Brackets Type | [M] Angular Brackets Material | [S] Surface Treatment |
| HBLTBA40 HBLTBBN40 HBLTBC40 HBLTBD40 | A6N01SS-T5 | Anodizing |
| Included screws | SCM435 | Trivalent Chromate |
Specification Table of Angular Brackets
| Angular Brackets Model |
| HBLTBA40 |
・To check the latest price, please click the "Check Price" button after confirming the model number.
| Angular Brackets Model | Supported Frames | Mass (g) | accessories | Quantity | |
| Angular Brackets Type | No. | ||||
| HBLTBA | 40 | 8 series 40 square | 97 | M10×16 | 1 |
| HBLTBBN | 98 | ||||
| HBLTBC | 267 | CLDM8-40-M | 1 | ||
| HBLTBD | 269 | ||||
Additional Processing of Angular Brackets
| Angular Brackets Model | - | (SET・SET1・SET2・SET3・SET4・SET5) |
| HBLTBA40 | - | SET2 |
| HBLTBBN40 | - | SET |
・To check the latest price, please click the "Check Price" button after confirming the model number.
| Alterations | Code | Angular Brackets Model | Mounting location | Accessories | ||||
| Type | No. | bolt | Quantity | Nut/Pre-inserted double joint | Quantity | |||
| Applicable bolts and nuts included | SET | HBLTBBN | 40 | - | CBM6-35 | 2 | HDJFSN8 | 1 |
| SET1 | HBLTBA | Use hole 1 | CBM6-20 | 2 | HNTT8-6 | 2 | ||
| SET2 | Use hole 2 | CBM6-20 | 1 | HNTT8-6 | 1 | 53 | ||
| SET3 | HBLTBC | Use hole 1 | CBM6-35 | 2 | HDJFSN8 | 1 | ||
| CBM6-20 | 2 | HNTT8-6 | 2 | |||||
| SET4 | HBLTBC | Use hole 2 | CBM6-35 | 2 | HDJFSN8 | 1 | ||
| CBM6-20 | 1 | HNTT8-6 | 1 | |||||
| SET5 | HBLTBD | - | CBM6-35 | 4 | HDJFSN8 | 2 | ||
[ ! ]When specifying -SET□, the included bolts are not RoHS compliant.
Supported Frames of Angular Brackets
-Only usable with8 series 40 x 40 mm .
Selection method of Angular Brackets
○No clamp lever type
- Products without clamp levers (HBLTBBN, HBLTBA) are one model for one side of the frame.
Please select two models according to your application and use them in combination. - The side of the frame is connected with the free Angular Brackets nut set (SET1, SET2).
- On the frame cross section side, S-shaped holes are drilled into the frame, and the free Angular Brackets is connected with a pre-assembled double joint set (SET).
Clamp lever type
- Products with clamp levers (HBLTBC, HBLTBD) are for double-sided use, so two frames can be connected with one model.
For types with clamp levers, please select a set of joints and nuts that connect the cross section and side (SET3, SET4) or a set with joints on both sides that connects cross sections together (SET5).
If connecting to the cross section side of the frame, S-hole processing is required on the frame.
▶For details on S-hole processing
▶For details on how to connect a pre-inserted double joint
Usage Example of Angular Brackets
(1) Frame cross section + frame cross section installation
Prepare two HBLTBBN40-SETs and an aluminum frame with additional S-shaped holes.
Connect them using the pre-assembled double joints and bolts from the HBLTBBN40 SET.
| Angular Brackets mounting position | Model | quantity | remarks |
|---|---|---|---|
| cross section | HBLTBBN40-SET | 1 | SET (pre-fit double joint + bolt) |
| HFS8-4040-[50-4000/0.5]-RSV | 1 | S hole addition | |
| cross section | HBLTBBN40-SET | 1 | SET (pre-fit double joint + bolt) |
| HFS8-4040-[50-4000/0.5]-LSV | 1 | S hole addition |
| Angular Brackets Model | quantity | remarks |
|---|---|---|
| HBLTBD40-SET5 | 1 | SET5 (2 pre-assembled double joints + bolt) |
| HFS8-4040-[50-4000/0.5]-RSV | 1 | S hole addition |
| HFS8-4040-[50-4000/0.5]-LSV | 1 | S hole addition |
(2) Frame side + frame cross section installation
Attach HBLTBA40 SET1 or SET2 to the side of the frame with a nut. Attach
HBLTBBN40 SET to the frame cross section by adding an S-hole to the frame and connect with a pre-inserted double joint.
(For types with clamp levers, connect the frame side and cross section with HBLTBC40 SET3 or SET4.)
■ If you want to adjust the Angular Brackets along the side (horizontal direction)
| Angular Brackets mounting position | Model | quantity | remarks |
|---|---|---|---|
| side | HBLTBA40-SET1 | 1 | SET1 (2 nuts + bolt for 1 hole) |
| HFS8-4040-[50-4000/0.5] | 1 | none | |
| cross section | HBLTBBN40-SET | 1 | SET (pre-fit double joint + bolt) |
| HFS8-4040-[50-4000/0.5]-LSV | 1 | S hole addition |
| Angular Brackets Model | quantity | remarks |
|---|---|---|
| HBLTBC40-SET3 | 1 | SET3 (2 nuts for 1 hole + pre-inserted double joint + bolt) |
| HFS8-4040-[50-4000/0.5] | 1 | none |
| HFS8-4040-[50-4000/0.5]-LSV | 1 | S hole addition |
■ When you want to adjust the Angular Brackets perpendicular to the side (vertical direction)
| Angular Brackets mounting position | Model | quantity | remarks |
|---|---|---|---|
| side | HBLTBA40-SET2 | 1 | SET2 (1 nut + bolt for 2 holes) |
| HFS8-4040-[50-4000/0.5] | 1 | none | |
| cross section | HBLTBBN40-SET | 1 | SET (pre-fit double joint + bolt) |
| HFS8-4040-[50-4000/0.5]-LSV | 1 | S hole addition |
| Angular Brackets Model | quantity | remarks |
|---|---|---|
| HBLTBC40-SET4 | 1 | SET4 (1 nut for 2 holes + pre-inserted double joint + bolt) |
| HFS8-4040-[50-4000/0.5] | 1 | none |
| HFS8-4040-[50-4000/0.5]-LSV | 1 | S hole addition |
(3) Frame side + frame side installation
Connect two HBLTBA40's SET1 or SET2 together.
■ If you want to adjust the Angular Brackets along the side (horizontal direction)
○No clamp lever type
| Angular Brackets mounting position | Model | quantity | remarks |
|---|---|---|---|
| side | HBLTBA40-SET1 | 2 | SET1 (2 nuts + bolt for 1 hole) |
| HFS8-4040-[50-4000/0.5] | 2 | none |
■ When you want to adjust the Angular Brackets perpendicular to the side (vertical direction)
○No clamp lever type
| Angular Brackets mounting position | Model | quantity | remarks |
|---|---|---|---|
| side | HBLTBA40-SET2 | 2 | SET2 (1 nut + bolt for 2 holes) |
| HFS8-4040-[50-4000/0.5] | 2 | none |
Reference of Angular Brackets
- There is no allowable load data available for this Angular Brackets product.
- When drilling S-holes into the frame, it does not matter whether you choose vertical or parallel as long as it is on one end face.
- Set items come with nuts or pre-fitted double joints plus the number of bolts required for installation.
Product Comparison Information of Angular Brackets
■8 Series Angular Brackets
| Product name | Free Angular Brackets | Angular Brackets | Free Angle Sheet Metal Angular Brackets |
|---|---|---|---|
| Product Photos |  |  |  |
| Installation Diagram |  |  |  |
| Angular Brackets | Any angle | 45 degrees, 135 degrees | Any angle |
| Supported Frames | 8 series 40 square | 8 series 40 square, 80 square, 8-45 series 45 square | 8 series 40 square |
| Angular Brackets Product page | This product | Product page | Product page |
Related Items of Angular Brackets
| Product name | Aluminum frame | Angular Brackets | Blind Joint | Frame cap | Groove cover | nut |
|---|---|---|---|---|---|---|
| photograph |  |  |  |  |  |  |
| Product page | Here | Here | Here | Here | Here | Here |
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
| Part Number |
|---|
| HBLTBA40 |
| HBLTBA40-SET1 |
| HBLTBA40-SET2 |
| HBLTBBN40 |
| HBLTBBN40-SET |
| HBLTBC40 |
| HBLTBC40-SET3 |
| HBLTBC40-SET4 |
| HBLTBD40 |
| HBLTBD40-SET5 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | RoHS | Accessory | With or Without Lever |
|---|---|---|---|---|---|---|---|
MYR 23.03 | 1 Piece(s) | Available | 2 Day(s) | 10 | Not Provided | Not Provided | |
MYR 29.10 | 1 Piece(s) | Available | 4 Day(s) or more | - | SET1 (Side Mounting Screw and Nut Set) | Not Provided | |
MYR 26.67 | 1 Piece(s) | Available | 1 Day(s) | - | SET2 (Side Mounting Screws and Nuts Set) | Not Provided | |
MYR 24.14 | 1 Piece(s) | Available | 4 Day(s) or more | 10 | Not Provided | Not Provided | |
MYR 34.04 | 1 Piece(s) | Available | 4 Day(s) or more | - | SET (End Section Mounting Screw and Nut Set) | Not Provided | |
MYR 85.24 | 1 Piece(s) | Available | 4 Day(s) or more | - | Not Provided | Provided | |
MYR 97.91 | 1 Piece(s) | 4 Day(s) or more | - | SET3 (Side Mounting Screws, Nuts Set) | Provided | ||
MYR 97.91 | 1 Piece(s) | Available | 4 Day(s) or more | - | SET4 (Side Mounting Screws and Nuts Set) | Provided | |
MYR 85.24 | 1 Piece(s) | Available | 4 Day(s) or more | - | Not Provided | Provided | |
MYR 105.05 | 1 Piece(s) | Available | 4 Day(s) or more | - | SET5 (End Section Mounting Screws and Nuts Set) | Provided |
Loading...
Basic Information
| Material | A6N01SS-T5 | Surface Treatment | Clear Anodize | Extrusion Series | 8 Series |
|---|---|---|---|---|---|
| Extrusion Size | For 40 | Bracket Type | Free Angle Brackets |
Specification/Dimensions
-
Accessory
-
With or Without Lever
- Not Provided
- Provided
-
type
- HBLTBA40
- HBLTBBN40
- HBLTBC40
- HBLTBD40
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 1 Day(s) or Less
- 2 Day(s) or Less
- 4 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- 5 Series Aluminum Frame Angled Bracket - 6mm Slot, Extruded
- Free Angle Brackets - For 5 Series (Slot Width 6mm) Aluminum Frames
- Free Angle Brackets - For 6 Series (Slot Width 8mm) Aluminum Frames
- [Clean & Pack] Angled Bracket for 5 Series (Slot Width 6 mm)
- [Clean & Pack] Free Angle Brackets for 6 Series (Slot Width 8 mm)
- [Clean & Pack] Free Angle Brackets for 8-45 Series (Slot Width 10 mm)
- [Clean & Pack] Angled Brackets for 8 Series (Slot Width 10 mm)
- M4 Series/M6 Series 135° Bracket
Complementary Products
-
Frame End Caps - For 8 Series (Slot Width 10mm) Aluminum Frames
MISUMI Standard Price : MYR 9.90- Days to Ship : 1 Day(s) or more
Customers Who Viewed This Item Also Viewed
-
Free Angle Brackets - For 6 Series (Slot Width 8mm) Aluminum FramesMISUMI
Standard Price : MYR 16.27-
Days to Ship : 2 Day(s) or more
-
Reversing Bracket with Protrusion - 8 Series, 10mm Groove, 1-Row Groove (90 Degree)MISUMI
Standard Price : MYR 4.57-
Days to Ship : 1 Day(s) or more
-
Free Angle Brackets - For 5 Series (Slot Width 6mm) Aluminum FramesMISUMI
Standard Price : MYR 13.34-
Days to Ship : 1 Day(s) or more
-
Blind Joint Parts - Nut for Pre-Assembly Double Joint (Series 8)MISUMI
Standard Price : MYR 9.09-
Days to Ship : 2 Day(s) or more
-
Free Angle Brackets - For 8-45 Series (Slot Width 10mm) Aluminum FramesMISUMI
Standard Price : MYR 24.14-
Days to Ship : 4 Day(s) or more
-
Angled Brackets - For 8 Series (Slot Width 10mm) Aluminum FramesMISUMI
Standard Price : MYR 10.30-
Days to Ship : 1 Day(s) or more
-
Free Angle Sheet Metal Brackets - For 8 Series (Slot Width 10mm) Aluminum FramesMISUMI
Standard Price : MYR 17.60-
Days to Ship : 4 Day(s) or more
-
Angled Brackets - For 6 Series (Slot Width 8mm) Aluminum Frames - ExtrudedMISUMI
Standard Price : MYR 9.74-
Days to Ship : 1 Day(s) or more
-
Sheet Metal Plates For 8 Series (Slot Width 10mm) Aluminum FramesMISUMI
Standard Price : MYR 5.76-
Days to Ship : 1 Day(s) or more
-
5 Series Aluminum Frame Angled Bracket - 6mm Slot, ExtrudedMISUMI
Standard Price : MYR 8.49-
Days to Ship : 1 Day(s) or more
-
Reversing Bracket with Protrusion - 8 Series, 10mm Groove, 1-Row Groove, 4 Mounting Holes (90 Degree)MISUMI
Standard Price : MYR 14.54-
Days to Ship : 2 Day(s) or more
-
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy