(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Free Angle Brackets - For 6 Series (Slot Width 8mm) Aluminum Frames (Part Numbers)
- Volume Discount
When connecting the frame, it can be connected at any angle. This product cannot be used alone. Please select 2 models for use in combination.
Part Number
Configured Part Number is shown.
Dimensional Drawing of Angular Brackets
Frame side mounting type Angular Brackets HBLTBA30(1 unit will be delivered for an order of 1 unit)Frame cross section mounting type
HBLTBBN30(1 unit will be delivered for an order of 1 unit)
HBLTBC30(One each of ① and ③ will be delivered for an order of 1 unit)
HBLTBD30(One each of ② and ③ will be delivered for an order of 1 unit)
1) Frame side mounting type②Frame cross section mounting type③Frame cross section mounting type (base)| Type | [M] Material | [S] Surface Treatment |
| HBLTBA30 HBLTBBN30 HBLTBC30 HBLTBD30 | A6N01SS-T5 | Anodizing |
| Included screws | SCM435 | Trivalent Chromate |
Specification Table of Angular Brackets
| Model |
| HBLTBA30 |
・To check the latest price, please click the "Check Price" button after confirming the model number.
| Angular Brackets Model | Supported Frames | Mass (g) | accessories | Quantity | |
| Type | No. | ||||
| HBLTBA | 30 | 6 series 30 square | 33 | M8×12 | 1 |
| HBLTBBN | 35 | ||||
| HBLTBC | 86 | CLDMC6-32-M | 1 | ||
| HBLTBD | 88 | ||||
Additional Processing of Angular Brackets
・The price list below is currentas of April 2011.・To check the latest price, please click the "Check Price" button after confirming the model number.
| Alterations | Code | Model | Mounting location | Accessories | ||||
| Angular Brackets Type | No. | bolt | Quantity | Nut/Pre-inserted double joint | Quantity | |||
| Applicable bolts and nuts included | SET | HBLTBBN | 30 | - | CBM5-25 | 2 | HDJFSN6 | 1 |
| SET1 | HBLTBA | Use hole 1 | CBM6-15 | 2 | HNTT6-6 | 2 | ||
| SET2 | Use hole 2 | CBM6-15 | 1 | HNTT6-6 | 1 | |||
| SET3 | HBLTBC | Use hole 1 | CBM5-25 | 2 | HDJFSN6 | 1 | ||
| CBM6-15 | 2 | HNTT6-6 | 2 | |||||
| SET4 | HBLTBC | Use hole 2 | CBM5-25 | 2 | HDJFSN6 | 1 | ||
| CBM6-15 | 1 | HNTT6-6 | 1 | |||||
| SET5 | HBLTBD | - | CBM5-25 | 4 | HDJFSN6 | 2 | ||
[ ! ]When specifying -SET□, the included bolts are not RoHS compliant.
Supported Frames of Angular Brackets
-Only usable with6 series 30 x 30 mm .
Selection Method of Angular Brackets
○No clamp lever type
- Products without clamp levers (HBLTBBN, HBLTBA) are one model for one side of the frame.
Please select two models according to your application and use them in combination. - The side of the frame is connected with the free Angular Brackets nut set (SET1, SET2).
- On the frame cross section side, S-shaped holes are drilled into the frame, and the free Angular Brackets is connected with a pre-assembled double joint set (SET).
Clamp lever type
- Angular Brackets Products with clamp levers (HBLTBC, HBLTBD) are for double-sided use, so two frames can be connected with one model.
For types with clamp levers, please select a set of joints and nuts that connect the cross section and side (SET3, SET4) or a set with joints on both sides that connects cross sections together (SET5).
If connecting to the cross section side of the frame, S-hole processing is required on the frame.
▶For details on S-hole processing.
▶For details on how to connect a pre-inserted double joint.
How to Use of Angular Brackets
(1) Prepare two HBLTBBN30-SET frame cross section + frame cross section mounting sets and
an aluminum frame with additional S-shaped holes.
Connect them using the pre-assembled double joints and bolts from the HBLTBBN30 SET.
| Angular Brackets mounting position | Model | quantity | remarks |
|---|---|---|---|
| cross section | HBLTBBN30-SET | 1 | SET (pre-fit double joint + bolt) |
| HFS6-3030-[50-4000/0.5]-RSV | 1 | S hole addition | |
| cross section | HBLTBBN30-SET | 1 | SET (pre-fit double joint + bolt) |
| HFS6-3030-[50-4000/0.5]-LSV | 1 | S hole addition |
| Angular Brackets Model | quantity | remarks |
|---|---|---|
| HBLTBD30-SET5 | 1 | SET5 (2 pre-assembled double joints + bolt) |
| HFS6-3030-[50-4000/0.5]-RSV | 1 | S hole addition |
| HFS6-3030-[50-4000/0.5]-LSV | 1 | S hole addition |
(2) Frame side + frame cross section installation
Attach HBLTBA30 SET1 or SET2 to the side of the frame with a nut. Attach
HBLTBBN30 SET to the frame cross section by adding an S-hole to the frame and connect with a pre-inserted double joint.
(For types with clamp levers, connect the frame side and cross section with HBLTBC30 SET3 or SET4.)
■ If you want to adjust the Angular Brackets along the side (horizontal direction)
| Angular Brackets mounting position | Model | quantity | remarks |
|---|---|---|---|
| side | HBLTBA30-SET1 | 1 | SET1 (2 nuts + bolt for 1 hole) |
| HFS6-3030-[50-4000/0.5] | 1 | none | |
| cross section | HBLTBBN30-SET | 1 | SET (pre-fit double joint + bolt) |
| HFS6-3030-[50-4000/0.5]-LSV | 1 | S hole addition |
| Angular Brackets Model | quantity | remarks |
|---|---|---|
| HBLTBC30-SET3 | 1 | SET3 (2 nuts for 1 hole + pre-inserted double joint + bolt) |
| HFS6-3030-[50-4000/0.5] | 1 | none |
| HFS6-3030-[50-4000/0.5]-LSV | 1 | S hole addition |
■ When you want to adjust the Angular Brackets perpendicular to the side (vertical direction)
| Angular Brackets mounting position | Model | quantity | remarks |
|---|---|---|---|
| side | HBLTBA30-SET2 | 1 | SET2 (1 nut + bolt for 2 holes) |
| HFS6-3030-[50-4000/0.5] | 1 | none | |
| cross section | HBLTBBN30-SET | 1 | SET (pre-fit double joint + bolt) |
| HFS6-3030-[50-4000/0.5]-LSV | 1 | S hole addition |
| Angular Brackets Model | quantity | remarks |
|---|---|---|
| HBLTBC30-SET4 | 1 | SET4 (1 nut for 2 holes + pre-inserted double joint + bolt) |
| HFS6-3030-[50-4000/0.5] | 1 | none |
| HFS6-3030-[50-4000/0.5]-LSV | 1 | S hole addition |
(3) Frame side + frame side installation
Connect two HBLTBA30's SET1 or SET2 together.
■ If you want to adjust the Angular Brackets along the side (horizontal direction)
○No clamp lever type
| Angular Brackets mounting position | Model | quantity | remarks |
|---|---|---|---|
| side | HBLTBA30-SET1 | 2 | SET1 (2 nuts + bolt for 1 hole) |
| HFS6-3030-[50-4000/0.5] | 2 | none |
■ When you want to adjust the Angular Brackets perpendicular to the side (vertical direction)
○No clamp lever type
| Angular Brackets mounting position | Model | quantity | remarks |
|---|---|---|---|
| side | HBLTBA30-SET2 | 2 | SET2 (1 nut + bolt for 2 holes) |
| HFS6-3030-[50-4000/0.5] | 2 | none |
Reference of Angular Brackets
- There is no allowable load data available for this Angular Brackets product.
- When drilling S-holes into the frame, it does not matter whether you choose vertical or parallel as long as it is on one end face.
- Set items come with nuts or pre-fitted double joints plus the number of bolts required for installation.
Product Comparison Information of Angular Brackets
■6 Series Angular Brackets
| Product name | Free Angular Brackets | Angular Brackets | Free Angle Sheet Metal Angular Brackets |
|---|---|---|---|
| Product Photos |  |  |  |
| Installation Diagram |  |  |  |
| Angular Brackets | Any angle | 45 degrees, 135 degrees | Any angle |
| Supported Frames | 6 series 30 square | 6 series 30mm square, 60mm square | 6 series 30 square |
| Angular Brackets Product page | This product | Product page | Product page |
Related Items of Angular Brackets
■Angular Brackets 6 series (groove width 8mm)
| Product name | Aluminum frame | Angular Brackets | Blind Joint | Frame cap | Groove cover | nut |
|---|---|---|---|---|---|---|
| photograph |  |  |  |  |  |  |
| Product page | Here | Here | Here | Here | Here | Here |
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
| Part Number |
|---|
| HBLTBA30 |
| HBLTBA30-SET1 |
| HBLTBA30-SET2 |
| HBLTBBN30 |
| HBLTBBN30-SET |
| HBLTBC30 |
| HBLTBC30-SET3 |
| HBLTBC30-SET4 |
| HBLTBD30 |
| HBLTBD30-SET5 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | RoHS | Accessory | With or Without Lever |
|---|---|---|---|---|---|---|---|
MYR 16.32 | 1 Piece(s) | Available | 2 Day(s) | 10 | Not Provided | Not Provided | |
MYR 20.61 | 1 Piece(s) | Available | 4 Day(s) or more | - | SET1 (Side Mounting Screw and Nut Set) | Not Provided | |
MYR 18.19 | 1 Piece(s) | Available | 4 Day(s) or more | - | SET2 (Side Mounting Screws and Nuts Set) | Not Provided | |
MYR 16.27 | 1 Piece(s) | Available | 2 Day(s) | 10 | Not Provided | Not Provided | |
MYR 23.98 | 1 Piece(s) | Available | 4 Day(s) or more | - | SET (End Section Mounting Screw and Nut Set) | Not Provided | |
MYR 63.25 | 1 Piece(s) | Available | 2 Day(s) | - | Not Provided | Provided | |
MYR 76.17 | 1 Piece(s) | Available | 4 Day(s) or more | - | SET3 (Side Mounting Screws, Nuts Set) | Provided | |
MYR 73.43 | 1 Piece(s) | Available | 4 Day(s) or more | - | SET4 (Side Mounting Screws and Nuts Set) | Provided | |
MYR 63.25 | 1 Piece(s) | Available | 4 Day(s) or more | - | Not Provided | Provided | |
MYR 78.66 | 1 Piece(s) | Available | 4 Day(s) or more | - | SET5 (End Section Mounting Screw and Nut Set) | Provided |
Loading...
Basic Information
| Material | A6N01SS-T5 | Surface Treatment | Clear Anodize | Extrusion Series | 6 Series |
|---|---|---|---|---|---|
| Extrusion Size | For 30 | Bracket Type | Free Angle Brackets |
Specification/Dimensions
-
Accessory
-
With or Without Lever
- Not Provided
- Provided
-
type
- HBLTBA30
- HBLTBBN30
- HBLTBC30
- HBLTBD30
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 2 Day(s) or Less
- 4 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- 5 Series Aluminum Frame Angled Bracket - 6mm Slot, Extruded
- Angled Brackets - For 6 Series (Slot Width 8mm) Aluminum Frames - Extruded
- Free Angle Sheet Metal Brackets - For 6 Series (Slot Width 8mm) Aluminum Frames
- Free Angle Brackets - For 5 Series (Slot Width 6mm) Aluminum Frames
- Free Angle Sheet Metal Brackets - For 8 Series (Slot Width 10mm) Aluminum Frames
- Free Angle Brackets - For 8 Series (Slot Width 10mm) Aluminum Frames
- [Clean & Pack] Angled Brackets for 6 Series (Slot Width 8 mm)
- Multi- Angle Frame Connector - Zinc Die- Cast (Tapped Ends)
Complementary Products
-
Frame End Caps - For 6 Series (Slot Width 8mm) Aluminum Frames
MISUMI Standard Price : MYR 8.81- Days to Ship : 1 Day(s) or more
-
6 Series Stopper - Integrated Pre-Assembly Insertion Nut, Steel
MISUMI Standard Price : MYR 2.26- Days to Ship : 1 Day(s) or more
-
Hexagon Socket Button Head Cap Bolt - M4-M12, 10-35mm Length
MISUMI Standard Price : MYR 1.50- Days to Ship : 2 Day(s) or more
Customers Who Viewed This Item Also Viewed
-
6 Series Aluminum Frame - Square 30x30mm, 4 Side Slots, A6N01SS-T5 AluminumMISUMI
Days to Ship : 2 Day(s) or more
-
Free Angle Brackets - For 5 Series (Slot Width 6mm) Aluminum FramesMISUMI
Standard Price : MYR 13.34-
Days to Ship : 1 Day(s) or more
-
Free Angle Brackets - For 8 Series (Slot Width 10mm) Aluminum FramesMISUMI
Standard Price : MYR 23.03-
Days to Ship : 1 Day(s) or more
-
Reversing Bracket with Protrusion - 6 Series, 8mm Groove, 1-Row (90 Degree)MISUMI
Standard Price : MYR 3.64-
Days to Ship : 1 Day(s) or more
-
Angled Brackets - For 6 Series (Slot Width 8mm) Aluminum Frames - ExtrudedMISUMI
Standard Price : MYR 9.74-
Days to Ship : 1 Day(s) or more
-
Free Angle Brackets - For 8-45 Series (Slot Width 10mm) Aluminum FramesMISUMI
Standard Price : MYR 24.14-
Days to Ship : 4 Day(s) or more
-
Free Angle Sheet Metal Brackets - For 6 Series (Slot Width 8mm) Aluminum FramesMISUMI
Standard Price : MYR 16.51-
Days to Ship : 4 Day(s) or more
-
Blind Joint Parts - Nut for Pre-Assembly Double Joint (Series 6)MISUMI
Standard Price : MYR 7.15-
Days to Ship : 1 Day(s) or more
-
6 Series Pre-Assembly Insertion Nut for Aluminum FramesMISUMI
Standard Price : MYR 1.70-
Days to Ship : 1 Day(s) or more
-
Low Profile Bracket - 6 Series, 8mm GrooveMISUMI
Standard Price : MYR 3.75-
Days to Ship : 1 Day(s) or more
-
Sheet Metal Plates For 6 Series (Slot Width 8mm) Aluminum FramesMISUMI
Standard Price : MYR 3.84-
Days to Ship : 1 Day(s) or more
-
5 Series Aluminum Frame Angled Bracket - 6mm Slot, ExtrudedMISUMI
Standard Price : MYR 8.49-
Days to Ship : 1 Day(s) or more
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy