For 5 Series (Slot Width 6mm) - Post-Assembly Insertion - Lock Nuts with Leaf Springs (Part Numbers)

Dimensional Drawing of Nuts

Single item model Nuts		Pack Type Nuts
HNTRP5(S10C equivalent) SHNTRP5(SUS304)		PACK-HNTRP5(Pack of 100) PACK-SHNTRP5(Pack of 100)

 

Reference tightening torque (N・m)
M	Equivalent to S10C/SUS304
5	6.8

Specification Table of Nuts

Specifications/Overview of Nuts

• The leaf spring is welded so the Nuts will not fall off even if the frame is held vertically.
• In addition, a set screw is included so that the nut itself can be fixed.
• This is effective in places that require high repeatability, such as when installing sensors or repeatedly removing panels.

Bolts for Attaching Various Aluminum Frames and Panels/Brackets (M size - L size) of Nuts

How to Use of Nuts

This product is a post-insertion nut. It can be installed from the groove after assembly.

The leaf springs are welded to the frame, so it can be easily positioned
vertically without slipping off .

Furthermore, the position of the Nuts alone can be fixed
by tightening the included set screw .

Selection Support Information of Nuts

■ Compatible series of Nuts

This product is compatible with Misumi 5 series (slot width 6 mm) aluminum frames.

5 Series

■ Difference between first-in and last-in of Nuts

・MISUMI aluminum frame Nuts are available in a variety of types, including first-in and last-in. Use them according to your needs.
First-in: Install from the groove end face before assembly. They are wide and have little play inside the groove, making bolt tightening easy.

■ If the aluminum frame becomes stuck and cannot be removed

To remove the Nuts, hook the hex wrench into the hole in the nut and turn it at right angles to the groove.

5 Series Related Parts of Nuts

Specifications

Example