[Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

Locating Pins - Tip Shape Selectable (Tip Length Configurable-Threaded) (Part Numbers)

Click this image to zoom it.

Move the mouse over the image to zoom

Volume Discount

While it has the same shape as conventional Tip Shape Selectable Type (Shapes A and C only), its configurable range is different therefrom. Overall length of insertion guide, R length and tapered section length are configurable.

Part Number

Configured Part Number is shown.

a = 1.0
d = D - 0.2
[ ! ] Relief dimensions are reference values.

Locating Pin - Tip Shape Selectable, Tip Length Configurable, Threaded: Related Image

[!] When L < Pitch × 2, the incomplete threaded portion (Pitch × 2) is included in M × 1.5.
[!] Fully Threaded Type of L = 0 w/o Pilot is available.
[ ! ] SUS304 products may not be polished and have no centering hole.
[ ! ] For SUS440C or 13Cr stainless steel, an identification groove is provided on D part, unless the L dimension is short.

Tip Shape
A Config.	[ ! ]B－C ≥ 2 [ ! ]R₁ = P²8C+C2
C Config.	[ ! ]B－E ≥ 2 [ ! ]R₂ = PcosA－2EsinA2－2sinA Reference: sin15° ≒ 0.259 sin30° = 0.5 sin45° ≒ 0.707 cos15° = 0.967 cos30° = 1.155 cos45° = 1.414

Material No.	[M] Material	[S] Surface Treatment	[H] Hardness	P, L, B Configurable	P, L, B, ML Configurable
(1)	SKS3 Equivalent	—	Treated Hardness: 55 to 60 HRC	LPALJ	LPALJL
(2)	SKS3 Equivalent	Hard Chrome Plating	Treaded Hardness: 50 to 55 HRC Plating Hardness: 750 HV or more	LPALG	LPALGL
(3)	S45C Equivalent	—	Treated Hardness: 45 to 50 HRC	LPAL	LPALL
(4)	S45C Equivalent	Black Oxide	Treated Hardness: 45 to 50 HRC	LPALB	LPALBL
(5)	S45C Equivalent	Hard Chrome Plating	Treated Hardness: 45 to 50 HRC Plating Hardness: 750 HV or more	LPALR	LPALRL
(6)	SUS304	—	—	LPALS	LPALSL
(7)	SUS304	Hard Chrome Plating	Plating Hardness: 750 HV or more	LPALD	LPALDL
(8)	SUS440C or 13Cr Stainless Steel	—	Treaded Hardness: 50 to 55 HRC	LPALC	LPALCL

Specification Table

Part Number

—

LPALJA10
LPALC16
LPALRLA8

—
—
—

P12.00
P20.00
P10.00

—
—
—

B6.5
B7.0
B10.0

—

—

C5

C5

—

A15

—

E10

—
—
—

L0
L5
L2

—

ML10

■P, L, B Configurable

Part Number

P
0.01 mm Increments

B
0.1 mm Increments

C
1 mm Increments

A
Selection

E
1 mm Increments

L
1 mm Increments

ML
(Mx1.5)

M
(Coarse)

^* Tightening Torque
N・cm

Type

Tip
Config.

D Dimension Tolerance
g6

Shape A only

Shape C only

LPALJ
LPALG
LPAL
LPALB
LPALR
LPALS
LPALD
LPALC

A

C

−0.002
−0.008

4.00 to 8.00

5.0 to 30.0

Shape A
1 ≤ C ≤ P/2

Shape C
15
30
45

Shape C
3 to 28

[!] Configurable range depends on P dimension. Confirm "Details of E Dimension Configurable Range" in the table below.

0 to 12

4.5

−0.004
−0.012

5.00 to 9.00

5.0 to 30.0

225

6.00 to 10.00

5.0 to 35.0

0 to 15

7.5

461

7.00 to 12.00

5.0 to 45.0

784

−0.005
−0.014

9.00 to 15.00

5.0 to 45.0

1911

11.00 to 20.00

5.0 to 55.0

0 to 20

M10

3783

−0.006
−0.017

13.00 to 20.00

5.0 to 55.0

M12

6605

17.00 to 27.00

5.0 to 60.0

0 to 25

M16

16366

−0.007
−0.020

21.00 to 30.00

5.0 to 60.0

M20

32928

*The tightening torque (ref. value) for hardened products is strength class 8.8. Not applicable when using locking materials or lock washers.
[ ! ] For full thread, specify L = 0 and NNC alteration.

■P, L, B, ML Configurable

Part Number

P
0.01 mm Increments

B
0.1 mm Increments

C
1 mm Increments

A
Selection

E
1 mm Increments

L
1 mm Increments

ML
1 mm Increments

M
(Coarse)

^* Tightening Torque
N・cm

Type

Tip
Config.

D Dimension Tolerance
g6

Shape A only

Shape C only

LPALJL
LPALGL
LPALL
LPALBL
LPALRL
LPALSL
LPALDL
LPALCL

A

C

−0.002
−0.008

4.00 to 8.00

5.0 to 30.0

Shape A
1 ≤ C ≤ P/2

Shape C
15
30
45

Shape C
3 to 28

[!] Configurable range depends on P dimension. Confirm "Details of E Dimension Configurable Range" in the table below.

0 to 12

3 to 9

−0.004
−0.012

5.00 to 9.00

5.0 to 30.0

4 to 12

225

6.00 to 10.00

5.0 to 35.0

0 to 15

5 to 15

461

7.00 to 12.00

5.0 to 45.0

6 to 18

784

−0.005
−0.014

9.00 to 15.00

5.0 to 45.0

8 to 24

1911

11.00 to 20.00

5.0 to 55.0

0 to 20

10 to 30

M10

3783

−0.006
−0.017

13.00 to 20.00

5.0 to 55.0

12 to 30

M12

6605

17.00 to 27.00

5.0 to 60.0

0 to 25

16 to 40

M16

16366

−0.007
−0.020

21.00 to 30.00

5.0 to 60.0

20 to 40

M20

32928

*The tightening torque (ref. value) for hardened products is strength class 8.8. Not applicable when using locking materials or lock washers.
[ ! ] For full thread, specify L = 0 and NNC alteration.

■Details of E Dimension Configurable Range

P	E 1 mm Increments
P	A 15	A 30	A 45
4.00 to 4.99	4	—	—
5.00 to 8.00	4 to 6	3	—
8.01 to 12.00	6 to 12	4·5	3
12.01 to 16.00	8 to 16	5 to 9	4·5
16.01 to 20.00	10 to 20	7 to 12	5 to 7
20.01 to 25.00	12 to 24	8 to 15	6 to 9
25.01 to 30.00	14 to 28	10 to 18	7 to 11

Alterations

Alterations Code	Alteration Details	Application Conditions	Ordering Example
SC	Adds Wrench Flats	SC = 1 mm Increments [ ! ]P-3 ≤ SC ≤ P-1,SC ≥ D [ ! ] When B - C or B - E ≤ 11, adds wrench flats on the tip [NG] Not applicable to Diamond Shape	LPALA5-P10.00-B12.0-R6-L5-SC8
LAC	Adds a wrench hole (⌀3.5)	ø3.5 Hole Machining [ ! ] Applicable when B - C or B - E ≥ 10 and when P ≥ 8 [NG] Not applicable to Diamond Shape	LPALA5-P10.00-B12.0-R6-L5-LAC
LTE	Adds a wrench hole (⌀2.5)	ø2.5 Hole Machining [ ! ] Applicable when B－C or B－E ≥ 8 and when 7 ≤ P ≤ 15 [NG] Not applicable to Diamond Shape	LPALA5-P10.00-B12.0-R6-L5-LTE
DRC	Screwdriver Slot	[ ! ] Width 0.8 mm Depth 1 mm	LPALA5-P10.00-B12.0-R6-L5-DRC
MC	Changes the thread diameter	[ ! ]D/3 ≤ MC < D [ ! ]MC ≥ 3 Ordering Code MC4 [ ! ] The incomplete threaded portion (Pitch × 2) is included. [NG] P, L, B, ML Configurable Types are not applicable	LPALA5-P10.00-B12.0-R6-L5-MC4
NNC	Adds Relief	[ ! ] Applicable when L = 0	LPALA5-P10.00-B12.0-R6-L0-NNC

Part Number

CAD Data download and 3D preview are not available because the part number has not yet been determined.

*In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.

CAD Download

: 30; 60; 90

Part Number
LPALJA3-P[5-6/0.1]-B[5-30/0.1]-C[1-3/1]-L[0-10/1]
LPALJA4-P[5-9/0.1]-B[5-30/0.1]-C[1-4/1]-L[0-10/1]
LPALJA5-P[6-10/0.1]-B[5-30/0.1]-C[1-5/1]-L[0-10/1]
LPALJA6-P[8-12/0.1]-B[5-40/0.1]-C[1-6/1]-L[0-10/1]
LPALJA8-P[10-15/0.1]-B[5-40/0.1]-C[1-7/1]-L[0-10/1]
LPALJA10-P[12-20/0.1]-B[5-50/0.1]-C[1-10/1]-L[0-10/1]
LPALJA12-P[16-20/0.1]-B[5-50/0.1]-C[1-10/1]-L[0-10/1]
LPALJA16-P[18-24/0.1]-B[5-50/0.1]-C[1-12/1]-L[0-10/1]
LPALJA20-P[22-30/0.1]-B[5-50/0.1]-C[1-15/1]-L[0-10/1]
LPALJC3-P[5-6/0.1]-B[5-30/0.1]-A[15,30,45]-E[3-28/1]-L[0-10/1]
LPALJC4-P[5-9/0.1]-B[5-25/0.1]-A[15,30,45]-E[3-28/1]-L[0-10/1]
LPALJC5-P[6-10/0.1]-B[5-30/0.1]-A[15,30,45]-E[3-28/1]-L[0-10/1]
LPALJC6-P[8-12/0.01]-B[5-40/0.1]-A[15,30,45]-E[3-28/1]-L[0-10/1]
LPALJC8-P[10-15/0.01]-B[5-40/0.1]-A[15,30,45]-E[3-28/1]-L[0-10/1]
LPALJC10-P[12-20/0.1]-B[5-50/0.1]-A[15,30,45]-E[3-28/1]-L[0-10/1]
LPALJC12-P[16-20/0.1]-B[5-50/0.1]-A[15,30,45]-E[3-28/1]-L[0-10/1]
LPALJC16-P[18-24/0.1]-B[5-50/0.1]-A[15,30,45]-E[3-28/1]-L[0-10/1]
LPALJC20-P[22-30/0.1]-B[5-50/0.1]-A[15,30,45]-E[3-28/1]-L[0-10/1]
LPALRA3-P[5-6/0.1]-B[5-30/0.1]-C[1-3/1]-L[0-10/1]
LPALRA4-P[5-9/0.1]-B[5-25/0.1]-C[1-4/1]-L[0-10/1]
LPALRA5-P[6-10/0.1]-B[5-30/0.1]-C[1-5/1]-L[0-10/1]
LPALRA6-P[8-12/0.1]-B[5-40/0.1]-C[1-6/1]-L[0-10/1]
LPALRA8-P[10-15/0.1]-B[5-40/0.1]-C[1-7/1]-L[0-10/1]
LPALRA10-P[12-20/0.1]-B[5-50/0.1]-C[1-10/1]-L[0-10/1]
LPALRA12-P[16-20/0.1]-B[5-55/0.1]-C[1-10/1]-L[0-20/1]
LPALRA16-P[18-24/0.1]-B[5-50/0.1]-C[1-12/1]-L[0-10/1]
LPALRA20-P[22-30/0.1]-B[5-50/0.1]-C[1-15/1]-L[0-10/1]
LPALRC3-P[5-6/0.1]-B[5-25/0.1]-A[15,30,45]-E[3-28/1]-L[0-10/1]
LPALRC4-P[5-9/0.1]-B[5-25/0.1]-A[15,30,45]-E[3-28/1]-L[0-10/1]
LPALRC5-P[6-10/0.1]-B[5-30/0.1]-A[15,30,45]-E[3-28/1]-L[0-10/1]
LPALRC6-P[8-12/0.1]-B[5-40/0.1]-A[15,30,45]-E[3-28/1]-L[0-10/1]
LPALRC8-P[10-15/0.1]-B[5-40/0.1]-A[15,30,45]-E[3-28/1]-L[0-10/1]
LPALRC10-P[12-20/0.1]-B[5-50/0.1]-A[15,30,45]-E[3-28/1]-L[0-10/1]
LPALRC12-P[16-20/0.1]-B[5-55/0.1]-A[15,30,45]-E[3-28/1]-L[0-20/1]
LPALRC16-P[18-24/0.1]-B[5-50/0.1]-A[15,30,45]-E[3-28/1]-L[0-10/1]
LPALRC20-P[22-30/0.1]-B[5-50/0.1]-A[15,30,45]-E[3-28/1]-L[0-10/1]
LPALSA3-P[5-6/0.01]-B[5-30/0.1]-C[1-3/1]-L[0-10/1]
LPALSA4-P[5-9/0.01]-B[5-30/0.1]-C[1-4/1]-L[0-10/1]
LPALSA5-P[6-10/0.01]-B[5-35/0.1]-C[1-5/1]-L[0-10/1]
LPALSA6-P[8-12/0.01]-B[5-45/0.1]-C[1-6/1]-L[0-10/1]
LPALSA8-P[10-15/0.01]-B[5-45/0.1]-C[1-7/1]-L[0-10/1]
LPALSA10-P[12-20/0.01]-B[5-55/0.1]-C[1-10/1]-L[0-10/1]
LPALSA12-P[16-20/0.01]-B[5-55/0.1]-C[1-10/1]-L[0-10/1]
LPALSA16-P[18-24/0.01]-B[5-60/0.1]-C[1-12/1]-L[0-10/1]
LPALSA20-P[22-30/0.01]-B[5-60/0.1]-C[1-15/1]-L[0-10/1]
LPALSC3-P[5-6/0.01]-B[5-30/0.1]-A[15,30]-E[3-28/1]-L[0-10/1]
LPALSC4-P[5-9/0.01]-B[5-30/0.1]-A[15,30,45]-E[3-28/1]-L[0-10/1]
LPALSC5-P[6-10/0.01]-B[5-35/0.1]-A[15,30,45]-E[3-28/1]-L[0-10/1]
LPALSC6-P[8-12/0.01]-B[5-45/0.1]-A[15,30,45]-E[3-28/1]-L[0-10/1]
LPALSC8-P[10-15/0.01]-B[5-45/0.1]-A[15,30,45]-E[3-28/1]-L[0-10/1]
LPALSC10-P[12-20/0.01]-B[5-55/0.1]-A[15,30,45]-E[3-28/1]-L[0-10/1]
LPALSC12-P[16-20/0.01]-B[5-55/0.1]-A[15,30,45]-E[3-28/1]-L[0-10/1]
LPALSC16-P[18-24/0.01]-B[5-60/0.1]-A[15,30,45]-E[3-28/1]-L[0-10/1]
LPALSC20-P[22-30/0.01]-B[5-60/0.1]-A[15,30,45]-E[3-28/1]-L[0-10/1]

Standard Unit Price	Minimum order quantity	Days to Ship	RoHS	Material Details	Insertion Guide Tip Type	Surface Treatment	Heat Treatment	Material	Locating Side Outer Dia. P (Ø) (mm)	Mounting Side Outer Dia. D (mm)	Mounting Section Length L (mm)	Taper Length E (mm)	A (°)	C (mm)	Length of Locating Side B (mm)
-	1 Piece(s)	3 Day(s)	10	SKS3 (Including equivalent materials)	R	Not Provided	Dip Quenching	[Steel] SKS3 Equivalent	5 ～ 6	3	0 ～ 10	-	-	1 ～ 3	5 ～ 30
-	1 Piece(s)	3 Day(s)	10	SKS3 (Including equivalent materials)	R	Not Provided	Dip Quenching	[Steel] SKS3 Equivalent	5 ～ 9	4	0 ～ 10	-	-	1 ～ 4	5 ～ 30
-	1 Piece(s)	3 Day(s)	10	SKS3 (Including equivalent materials)	R	Not Provided	Dip Quenching	[Steel] SKS3 Equivalent	6 ～ 10	5	0 ～ 10	-	-	1 ～ 5	5 ～ 30
-	1 Piece(s)	3 Day(s)	10	SKS3 (Including equivalent materials)	R	Not Provided	Dip Quenching	[Steel] SKS3 Equivalent	8 ～ 12	6	0 ～ 10	-	-	1 ～ 6	5 ～ 40
-	1 Piece(s)	3 Day(s)	10	SKS3 (Including equivalent materials)	R	Not Provided	Dip Quenching	[Steel] SKS3 Equivalent	10 ～ 15	8	0 ～ 10	-	-	1 ～ 7	5 ～ 40
-	1 Piece(s)	3 Day(s)	10	SKS3 (Including equivalent materials)	R	Not Provided	Dip Quenching	[Steel] SKS3 Equivalent	12 ～ 20	10	0 ～ 10	-	-	1 ～ 10	5 ～ 50
-	1 Piece(s)	3 Day(s)	10	SKS3 (Including equivalent materials)	R	Not Provided	Dip Quenching	[Steel] SKS3 Equivalent	16 ～ 20	12	0 ～ 10	-	-	1 ～ 10	5 ～ 50
-	1 Piece(s)	3 Day(s)	10	SKS3 (Including equivalent materials)	R	Not Provided	Dip Quenching	[Steel] SKS3 Equivalent	18 ～ 24	16	0 ～ 10	-	-	1 ～ 12	5 ～ 50
-	1 Piece(s)	3 Day(s)	10	SKS3 (Including equivalent materials)	R	Not Provided	Dip Quenching	[Steel] SKS3 Equivalent	22 ～ 30	20	0 ～ 10	-	-	1 ～ 15	5 ～ 50
-	1 Piece(s)	3 Day(s)	10	SKS3 (Including equivalent materials)	Taper R	Not Provided	Dip Quenching	[Steel] SKS3 Equivalent	5 ～ 6	3	0 ～ 10	3 ～ 28	15 ～ 45	-	5 ～ 30
-	1 Piece(s)	3 Day(s)	10	SKS3 (Including equivalent materials)	Taper R	Not Provided	Dip Quenching	[Steel] SKS3 Equivalent	5 ～ 9	4	0 ～ 10	3 ～ 28	15 ～ 45	-	5 ～ 25
-	1 Piece(s)	3 Day(s)	10	SKS3 (Including equivalent materials)	Taper R	Not Provided	Dip Quenching	[Steel] SKS3 Equivalent	6 ～ 10	5	0 ～ 10	3 ～ 28	15 ～ 45	-	5 ～ 30
-	1 Piece(s)	3 Day(s)	10	SKS3 (Including equivalent materials)	Taper R	Not Provided	Dip Quenching	[Steel] SKS3 Equivalent	8 ～ 12	6	0 ～ 10	3 ～ 28	15 ～ 45	-	5 ～ 40
-	1 Piece(s)	3 Day(s)	10	SKS3 (Including equivalent materials)	Taper R	Not Provided	Dip Quenching	[Steel] SKS3 Equivalent	10 ～ 15	8	0 ～ 10	3 ～ 28	15 ～ 45	-	5 ～ 40
-	1 Piece(s)	3 Day(s)	10	SKS3 (Including equivalent materials)	Taper R	Not Provided	Dip Quenching	[Steel] SKS3 Equivalent	12 ～ 20	10	0 ～ 10	3 ～ 28	15 ～ 45	-	5 ～ 50
-	1 Piece(s)	3 Day(s)	10	SKS3 (Including equivalent materials)	Taper R	Not Provided	Dip Quenching	[Steel] SKS3 Equivalent	16 ～ 20	12	0 ～ 10	3 ～ 28	15 ～ 45	-	5 ～ 50
-	1 Piece(s)	3 Day(s)	10	SKS3 (Including equivalent materials)	Taper R	Not Provided	Dip Quenching	[Steel] SKS3 Equivalent	18 ～ 24	16	0 ～ 10	3 ～ 28	15 ～ 45	-	5 ～ 50
-	1 Piece(s)	3 Day(s)	10	SKS3 (Including equivalent materials)	Taper R	Not Provided	Dip Quenching	[Steel] SKS3 Equivalent	22 ～ 30	20	0 ～ 10	3 ～ 28	15 ～ 45	-	5 ～ 50
-	1 Piece(s)	7 Day(s)	10	S45C (Including equivalent materials)	R	[Hard Chrome Plating] Hard Chrome Plating	Dip Quenching	[Steel] S45C Equivalent	5 ～ 6	3	0 ～ 10	-	-	1 ～ 3	5 ～ 30
-	1 Piece(s)	7 Day(s)	10	S45C (Including equivalent materials)	R	[Hard Chrome Plating] Hard Chrome Plating	Dip Quenching	[Steel] S45C Equivalent	5 ～ 9	4	0 ～ 10	-	-	1 ～ 4	5 ～ 25
-	1 Piece(s)	7 Day(s)	10	S45C (Including equivalent materials)	R	[Hard Chrome Plating] Hard Chrome Plating	Dip Quenching	[Steel] S45C Equivalent	6 ～ 10	5	0 ～ 10	-	-	1 ～ 5	5 ～ 30
-	1 Piece(s)	7 Day(s)	10	S45C (Including equivalent materials)	R	[Hard Chrome Plating] Hard Chrome Plating	Dip Quenching	[Steel] S45C Equivalent	8 ～ 12	6	0 ～ 10	-	-	1 ～ 6	5 ～ 40
-	1 Piece(s)	7 Day(s)	10	S45C (Including equivalent materials)	R	[Hard Chrome Plating] Hard Chrome Plating	Dip Quenching	[Steel] S45C Equivalent	10 ～ 15	8	0 ～ 10	-	-	1 ～ 7	5 ～ 40
-	1 Piece(s)	7 Day(s)	10	S45C (Including equivalent materials)	R	[Hard Chrome Plating] Hard Chrome Plating	Dip Quenching	[Steel] S45C Equivalent	12 ～ 20	10	0 ～ 10	-	-	1 ～ 10	5 ～ 50
-	1 Piece(s)	7 Day(s)	10	S45C (Including equivalent materials)	R	[Hard Chrome Plating] Hard Chrome Plating	Dip Quenching	[Steel] S45C Equivalent	16 ～ 20	12	0 ～ 20	-	-	1 ～ 10	5 ～ 55
-	1 Piece(s)	7 Day(s)	10	S45C (Including equivalent materials)	R	[Hard Chrome Plating] Hard Chrome Plating	Dip Quenching	[Steel] S45C Equivalent	18 ～ 24	16	0 ～ 10	-	-	1 ～ 12	5 ～ 50
-	1 Piece(s)	7 Day(s)	10	S45C (Including equivalent materials)	R	[Hard Chrome Plating] Hard Chrome Plating	Dip Quenching	[Steel] S45C Equivalent	22 ～ 30	20	0 ～ 10	-	-	1 ～ 15	5 ～ 50
-	1 Piece(s)	7 Day(s)	10	S45C (Including equivalent materials)	Taper R	[Hard Chrome Plating] Hard Chrome Plating	Dip Quenching	[Steel] S45C Equivalent	5 ～ 6	3	0 ～ 10	3 ～ 28	15 ～ 45	-	5 ～ 25
-	1 Piece(s)	7 Day(s)	10	S45C (Including equivalent materials)	Taper R	[Hard Chrome Plating] Hard Chrome Plating	Dip Quenching	[Steel] S45C Equivalent	5 ～ 9	4	0 ～ 10	3 ～ 28	15 ～ 45	-	5 ～ 25
-	1 Piece(s)	7 Day(s)	10	S45C (Including equivalent materials)	Taper R	[Hard Chrome Plating] Hard Chrome Plating	Dip Quenching	[Steel] S45C Equivalent	6 ～ 10	5	0 ～ 10	3 ～ 28	15 ～ 45	-	5 ～ 30
-	1 Piece(s)	7 Day(s)	10	S45C (Including equivalent materials)	Taper R	[Hard Chrome Plating] Hard Chrome Plating	Dip Quenching	[Steel] S45C Equivalent	8 ～ 12	6	0 ～ 10	3 ～ 28	15 ～ 45	-	5 ～ 40
-	1 Piece(s)	7 Day(s)	10	S45C (Including equivalent materials)	Taper R	[Hard Chrome Plating] Hard Chrome Plating	Dip Quenching	[Steel] S45C Equivalent	10 ～ 15	8	0 ～ 10	3 ～ 28	15 ～ 45	-	5 ～ 40
-	1 Piece(s)	7 Day(s)	10	S45C (Including equivalent materials)	Taper R	[Hard Chrome Plating] Hard Chrome Plating	Dip Quenching	[Steel] S45C Equivalent	12 ～ 20	10	0 ～ 10	3 ～ 28	15 ～ 45	-	5 ～ 50
-	1 Piece(s)	7 Day(s)	10	S45C (Including equivalent materials)	Taper R	[Hard Chrome Plating] Hard Chrome Plating	Dip Quenching	[Steel] S45C Equivalent	16 ～ 20	12	0 ～ 20	3 ～ 28	15 ～ 45	-	5 ～ 55
-	1 Piece(s)	7 Day(s)	10	S45C (Including equivalent materials)	Taper R	[Hard Chrome Plating] Hard Chrome Plating	Dip Quenching	[Steel] S45C Equivalent	18 ～ 24	16	0 ～ 10	3 ～ 28	15 ～ 45	-	5 ～ 50
-	1 Piece(s)	7 Day(s)	10	S45C (Including equivalent materials)	Taper R	[Hard Chrome Plating] Hard Chrome Plating	Dip Quenching	[Steel] S45C Equivalent	22 ～ 30	20	0 ～ 10	3 ～ 28	15 ～ 45	-	5 ～ 50
-	1 Piece(s)	3 Day(s)	10	SUS304	R	Not Provided	Not Provided	[Stainless Steel] SUS304	5 ～ 6	3	0 ～ 10	-	-	1 ～ 3	5 ～ 30
-	1 Piece(s)	3 Day(s)	10	SUS304	R	Not Provided	Not Provided	[Stainless Steel] SUS304	5 ～ 9	4	0 ～ 10	-	-	1 ～ 4	5 ～ 30
-	1 Piece(s)	3 Day(s)	10	SUS304	R	Not Provided	Not Provided	[Stainless Steel] SUS304	6 ～ 10	5	0 ～ 10	-	-	1 ～ 5	5 ～ 35
-	1 Piece(s)	3 Day(s)	10	SUS304	R	Not Provided	Not Provided	[Stainless Steel] SUS304	8 ～ 12	6	0 ～ 10	-	-	1 ～ 6	5 ～ 45
-	1 Piece(s)	3 Day(s)	10	SUS304	R	Not Provided	Not Provided	[Stainless Steel] SUS304	10 ～ 15	8	0 ～ 10	-	-	1 ～ 7	5 ～ 45
-	1 Piece(s)	3 Day(s)	10	SUS304	R	Not Provided	Not Provided	[Stainless Steel] SUS304	12 ～ 20	10	0 ～ 10	-	-	1 ～ 10	5 ～ 55
-	1 Piece(s)	3 Day(s)	10	SUS304	R	Not Provided	Not Provided	[Stainless Steel] SUS304	16 ～ 20	12	0 ～ 10	-	-	1 ～ 10	5 ～ 55
-	1 Piece(s)	3 Day(s)	10	SUS304	R	Not Provided	Not Provided	[Stainless Steel] SUS304	18 ～ 24	16	0 ～ 10	-	-	1 ～ 12	5 ～ 60
-	1 Piece(s)	3 Day(s)	10	SUS304	R	Not Provided	Not Provided	[Stainless Steel] SUS304	22 ～ 30	20	0 ～ 10	-	-	1 ～ 15	5 ～ 60
-	1 Piece(s)	3 Day(s)	10	SUS304	Taper R	Not Provided	Not Provided	[Stainless Steel] SUS304	5 ～ 6	3	0 ～ 10	3 ～ 28	15 ～ 30	-	5 ～ 30
-	1 Piece(s)	3 Day(s)	10	SUS304	Taper R	Not Provided	Not Provided	[Stainless Steel] SUS304	5 ～ 9	4	0 ～ 10	3 ～ 28	15 ～ 45	-	5 ～ 30
-	1 Piece(s)	3 Day(s)	10	SUS304	Taper R	Not Provided	Not Provided	[Stainless Steel] SUS304	6 ～ 10	5	0 ～ 10	3 ～ 28	15 ～ 45	-	5 ～ 35
-	1 Piece(s)	3 Day(s)	10	SUS304	Taper R	Not Provided	Not Provided	[Stainless Steel] SUS304	8 ～ 12	6	0 ～ 10	3 ～ 28	15 ～ 45	-	5 ～ 45
-	1 Piece(s)	3 Day(s)	10	SUS304	Taper R	Not Provided	Not Provided	[Stainless Steel] SUS304	10 ～ 15	8	0 ～ 10	3 ～ 28	15 ～ 45	-	5 ～ 45
-	1 Piece(s)	3 Day(s)	10	SUS304	Taper R	Not Provided	Not Provided	[Stainless Steel] SUS304	12 ～ 20	10	0 ～ 10	3 ～ 28	15 ～ 45	-	5 ～ 55
-	1 Piece(s)	3 Day(s)	10	SUS304	Taper R	Not Provided	Not Provided	[Stainless Steel] SUS304	16 ～ 20	12	0 ～ 10	3 ～ 28	15 ～ 45	-	5 ～ 55
-	1 Piece(s)	3 Day(s)	10	SUS304	Taper R	Not Provided	Not Provided	[Stainless Steel] SUS304	18 ～ 24	16	0 ～ 10	3 ～ 28	15 ～ 45	-	5 ～ 60
-	1 Piece(s)	3 Day(s)	10	SUS304	Taper R	Not Provided	Not Provided	[Stainless Steel] SUS304	22 ～ 30	20	0 ～ 10	3 ～ 28	15 ～ 45	-	5 ～ 60

Product TOP

Basic Information

Basic Shape	Large Head	Insertion Guide Tip Shape	Round	Insertion Guide Specifications	Not Provided
Mounting Side Shape	Threaded	Locating Side O.D. Tolerance	0/-0.01	Mounting Side Tolerance	g6

Configure

144 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

Material Details
- SUS304
- SUS440C or 13Cr Stainless Steel
- SKS3 (Including equivalent materials)
- S45C (Including equivalent materials)
Clear
Insertion Guide Tip Type
- Taper R
- R
Clear
Surface Treatment
- Not Provided
- Black Oxide
- Hard Chrome Plating
  - Hard Chrome Plating
Clear
Heat Treatment
- Not Provided
- Dip Quenching
Clear
Material
- Steel
  - SKS3 Equivalent
  - S45C Equivalent
- Stainless Steel
  - SUS304
  - SUS440C Equivalent
Clear
Locating Side Outer Dia. P (Ø)(mm)
[5-30/0.1mm Unit(s)][5-30/0.01mm Unit(s)]
Clear
Mounting Side Outer Dia. D(mm)
3

4

5

6

8

10

12

16

20
Clear
Mounting Section Length L(mm)
[0-20/1mm Unit(s)]
Clear
Taper Length E(mm)
[3-28/1mm Unit(s)]
Clear
A(°)
15

30

45
Clear
C(mm)
[1-15/1mm Unit(s)]
Clear
Length of Locating Side B(mm)
[5-60/0.1mm Unit(s)]
Clear
type
- LPALBA
- LPALBC
- LPALC□
- LPALD□
- LPALG□
- LPALJ□
- LPALR□
- LPALS□
- LPAL□
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

3 Day(s) or Less

4 Day(s) or Less

7 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Additional Products in this Category

Complementary Products

[High Precision] X-Axis Cross Roller - Micrometer Head
MISUMI Standard Price : MYR 804.71- Days to Ship : 6 Day(s) or more
Angles - Resin
MISUMI Days to Ship : -
Bushings for Locating Pins - Copper Alloy, Flanged
MISUMI Days to Ship : 8 Day(s) or more
Sheet Metal Bracket For 5 Series (Slot Width 6mm) Aluminum Frames - Bent-Shaped
MISUMI Standard Price : MYR 5.78- Days to Ship : 1 Day(s) or more

Customers Who Viewed This Item Also Viewed

Locating Pins - Tip Shape Selectable (Threaded)
MISUMI

Days to Ship : 3 Day(s) or more
Locating Pins - Tip Shape Selectable (Full Threaded)
MISUMI

Days to Ship : 3 Day(s) or more
Locating Pins - Large Head, Tapered (Threaded)
MISUMI

Days to Ship : 3 Day(s) or more
Locating Pins - Tip Shape Selectable (Straight Tapped)
MISUMI

Days to Ship : 3 Day(s) or more
Locating Pins - Tip Shape Selectable (Configurable Shoulder Thickness-Threaded)
MISUMI

Days to Ship : 4 Day(s) or more
Locating Pins - Tip Shape Selectable (Press Fit)
MISUMI

Days to Ship : 3 Day(s) or more
Locating Pins - Sphere Small Head - Press Fit
MISUMI

Days to Ship : 6 Day(s) or more
Locating Pins-High Hardness Stainless Steel/R/Taper R/Threaded
MISUMI

Days to Ship : 6 Day(s) or more
Locating Pins - Large Flat Head (Press Fit)
MISUMI

Days to Ship : 1 Day(s) or more
Marker Pins - Hexagon Socket Type
MISUMI

Days to Ship : 3 Day(s) or more
Locating Pins for Fixtures - Precision Grade, Configurable - No Shoulder - Threaded
MISUMI

Days to Ship : 7 Day(s) or more
Locating Pins - Sphere Large Head (Threaded)
MISUMI

Days to Ship : 3 Day(s) or more

back next

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations): Tel：(60) 3 7890 6399; 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday); Technical Inquiry

How can we improve?

Locating Pins - Tip Shape Selectable (Tip Length Configurable-Threaded) (Part Numbers)

Specification Table

Alterations

Part Number

Basic Information

Configure

Specification/Dimensions

Material Details

Insertion Guide Tip Type

Surface Treatment

Heat Treatment

Material

Locating Side Outer Dia. P (Ø)(mm)

Mounting Side Outer Dia. D(mm)

Mounting Section Length L(mm)

Taper Length E(mm)

A(°)

C(mm)

Length of Locating Side B(mm)

type

CAD

Days to Ship

Specify Alterations

Additional Products in this Category

Complementary Products

Customers Who Viewed This Item Also Viewed

Tech Support

Payment Method

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm, 9am – 1pm(Sat) * Order cut-off time is 12pm