[Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

Perforated Metal Sheets - Framed Type (Part Numbers)

MISUMI

"Can serve as the vent cover, filter or strainer. Have the frame spot-welded to facilitate installation or joint."

Part Number

Configured Part Number is shown.

Drawing/Specifications
3D Preview
Part Numbers
More Information
Catalog

Dimensional Drawing

Dimensional Tolerances Without Command

Dimension Range		Tolerance (㎜)
Over	or Less	Tolerance (㎜)
0.5	6	±0.1
6	30	±0.2
30	120	±0.3
120	400	±0.5
400	1000	±0.8

[ ! ] Compliant with JIS B 0405 Class m (Medium Class).

Standard Type
PMSF·PMUF·PMAF
PMAFW·PMAFB

Hole Machined Type

- 4 Holes - 4H

- 6 Holes - 6H

- 6 Holes - 6HV

- 8 Holes - 8H

Type	Perforated Metal Sheets	Frame	[S] Surface Treatment
PMSF	SPCC	SPCC	Nickel Plating
PMUF	SUS304	SUS304	—
PMAF	A1100	A5052	—
PMAFW			Clear Anodize
PMAFB			Black Anodize

[ ! ] A ≥ B
[ ! ] It is spot welded and there will be welding marks. Welding locations are arbitrary.
[ ! ] The positional relationship between the frame and the perforated metal hole (D) is random.
[ ! ] Please handle Perforated Metal Sheets with care as some areas are not smooth.

Specification Table

Part Number	—	A	—	B	—	T	—	C	—	d
PMSF4 PMSF4H3	— —	480 480	— —	420 420	— —	1.2 1.2	— —	20 20	—	6.5

■ Standard Type

Part Number		1 mm Increments		T Selection											C Selection	P	Perforated Rate %
Type	D	A	B	PMSF					PMUF					PMAF·PMAWF·PMABF
PMSF PMUF	1	50 to 500	50 to 500	0.5	0.8				0.5	0.8				—	10 15 20	2	22.6
	2			0.5	0.8	1.0					1.0					3	40.2
	3					1.0	1.2	1.6			1.0	1.2	1.5			5	32.6
	4															7	29.6
	5															8	35.4
PMAF PMAFW PMAFB	3			—					—					1.0 2.0		5	32.6
	5															8	35.4
	9															15	32.6

■ Hole Machined Type

Part Number			1 mm Increments		T Selection											C Selection	d Selection	P	Perforated Rate %
Type	Nominal	D	A	B	PMSF					PMUF					PMAF·PMAWF·PMABF
PMSF PMUF	4H 6H 6HV 8H	1	50 to 500	50 to 500	0.5	0.8				0.5	0.8				—	10 15 20	4.5 5.5 6.5 9.0	2	22.6
		2			0.5	0.8	1.0					1.0						3	40.2
		3					1.0	1.2	1.6			1.0	1.2	1.5				5	32.6
		4																7	29.6
		5																8	35.4
PMAF PMAFW PMAFB		3			—					—					1.0 2.0			5	32.6
		5																8	35.4
		9																15	32.6

[ ! ] d6.5 and 9 are not available for C = 10.

Part Number

CAD Data download and 3D preview are not available because the part number has not yet been determined.

*In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.

CAD Download

: 30; 60; 90

Part Number
PMSF1-[50-500/1]-[50-500/1]-[0.5,0.8]-[10,15,20]
PMSF2-[50-500/1]-[50-500/1]-[0.5,0.8,1]-[10,15,20]
PMSF3-[50-500/1]-[50-500/1]-[1,1.2,1.6]-[10,15,20]
PMSF4-[50-500/1]-[50-500/1]-[1,1.2,1.6]-[10,15,20]
PMSF4H1-[50-500/1]-[50-500/1]-[0.5,0.8]-[10,15,20]-[4.5,5.5,6.5,9]
PMSF4H2-[50-500/1]-[50-500/1]-[0.5,0.8,1]-[10,15,20]-[4.5,5.5,6.5,9]
PMSF4H3-[50-500/1]-[50-500/1]-[1,1.2,1.6]-[10,15,20]-[4.5,5.5,6.5,9]
PMSF4H4-[50-500/1]-[50-500/1]-[1,1.2,1.6]-[10,15,20]-[4.5,5.5,6.5,9]
PMSF4H5-[50-500/1]-[50-500/1]-[1,1.2,1.6]-[10,15,20]-[4.5,5.5,6.5,9]
PMSF5-[50-500/1]-[50-500/1]-[1,1.2,1.6]-[10,15,20]
PMSF6H1-[50-500/1]-[50-500/1]-[0.5,0.8]-[10,15,20]-[4.5,5.5,6.5,9]
PMSF6H2-[50-500/1]-[50-500/1]-[0.5,0.8,1]-[10,15,20]-[4.5,5.5,6.5,9]
PMSF6H3-[50-500/1]-[50-500/1]-[1,1.2,1.6]-[10,15,20]-[4.5,5.5,6.5,9]
PMSF6H4-[50-500/1]-[50-500/1]-[1,1.2,1.6]-[10,15,20]-[4.5,5.5,6.5,9]
PMSF6H5-[50-500/1]-[50-500/1]-[1,1.2,1.6]-[10,15,20]-[4.5,5.5,6.5,9]
PMSF6HV1-[50-500/1]-[50-500/1]-[0.5,0.8]-[10,15,20]-[4.5,5.5,6.5,9]
PMSF6HV2-[50-500/1]-[50-500/1]-[0.5,0.8,1]-[10,15,20]-[4.5,5.5,6.5,9]
PMSF6HV3-[50-500/1]-[50-500/1]-[1,1.2,1.6]-[10,15,20]-[4.5,5.5,6.5,9]
PMSF6HV4-[50-500/1]-[50-500/1]-[1,1.2,1.6]-[10,15,20]-[4.5,5.5,6.5,9]
PMSF6HV5-[50-500/1]-[50-500/1]-[1,1.2,1.6]-[10,15,20]-[4.5,5.5,6.5,9]
PMSF8H1-[50-500/1]-[50-500/1]-[0.5,0.8]-[10,15,20]-[4.5,5.5,6.5,9]
PMSF8H2-[50-500/1]-[50-500/1]-[0.5,0.8,1]-[10,15,20]-[4.5,5.5,6.5,9]
PMSF8H3-[50-500/1]-[50-500/1]-[1,1.2,1.6]-[10,15,20]-[4.5,5.5,6.5,9]
PMSF8H4-[50-500/1]-[50-500/1]-[1,1.2,1.6]-[10,15,20]-[4.5,5.5,6.5,9]
PMSF8H5-[50-500/1]-[50-500/1]-[1,1.2,1.6]-[10,15,20]-[4.5,5.5,6.5,9]
PMUF1-[50-500/1]-[50-500/1]-[0.5,0.8]-[10,15,20]
PMUF2-[50-500/1]-[50-500/1]-1-[10,15,20]
PMUF3-[50-500/1]-[50-500/1]-[1,1.2,1.5]-[10,15,20]
PMUF4-[50-500/1]-[50-500/1]-1.5-[10,15,20]
PMUF4H1-[50-500/1]-[50-500/1]-[0.5,0.8]-[10,15,20]-[4.5,5.5,6.5,9]
PMUF4H2-[50-500/1]-[50-500/1]-1-[10,15,20]-[4.5,5.5,6.5,9]
PMUF4H3-[50-500/1]-[50-500/1]-[1,1.2,1.5]-[10,15,20]-[4.5,5.5,6.5,9]
PMUF4H4-[50-500/1]-[50-500/1]-[1,1.2,1.5]-[10,15,20]-[4.5,5.5,6.5,9]
PMUF4H5-[50-500/1]-[50-500/1]-[1,1.2,1.5]-[10,15,20]-[4.5,5.5,6.5,9]
PMUF5-[50-500/1]-[50-500/1]-[1,1.2,1.5]-[10,15,20]
PMUF6H1-[50-500/1]-[50-500/1]-[0.5,0.8]-[10,15,20]-[4.5,5.5,6.5,9]
PMUF6H2-[50-500/1]-[50-500/1]-1-[10,15,20]-[4.5,5.5,6.5,9]
PMUF6H3-[50-500/1]-[50-500/1]-[1,1.2,1.5]-[10,15,20]-[4.5,5.5,6.5,9]
PMUF6H4-[50-500/1]-[50-500/1]-[1,1.2,1.5]-[10,15,20]-[4.5,5.5,6.5,9]
PMUF6H5-[50-500/1]-[50-500/1]-[1,1.2,1.5]-[10,15,20]-[4.5,5.5,6.5,9]
PMUF6HV1-[50-500/1]-[50-500/1]-[0.5,0.8]-[10,15,20]-[4.5,5.5,6.5,9]
PMUF6HV2-[50-500/1]-[50-500/1]-1-[10,15,20]-[4.5,5.5,6.5,9]
PMUF6HV3-[50-500/1]-[50-500/1]-[1,1.2,1.5]-[10,15,20]-[4.5,5.5,6.5,9]
PMUF6HV4-[50-500/1]-[50-500/1]-[1,1.2,1.5]-[10,15,20]-[4.5,5.5,6.5,9]
PMUF6HV5-[50-500/1]-[50-500/1]-[1,1.2,1.5]-[10,15,20]-[4.5,5.5,6.5,9]
PMUF8H1-[50-500/1]-[50-500/1]-[0.5,0.8]-[10,15,20]-[4.5,5.5,6.5,9]
PMUF8H2-[50-500/1]-[50-500/1]-1-[10,15,20]-[4.5,5.5,6.5,9]
PMUF8H3-[50-500/1]-[50-500/1]-[1,1.2,1.5]-[10,15,20]-[4.5,5.5,6.5,9]
PMUF8H4-[50-500/1]-[50-500/1]-[1,1.2,1.5]-[10,15,20]-[4.5,5.5,6.5,9]
PMUF8H5-[50-500/1]-[50-500/1]-[1,1.2,1.5]-[10,15,20]-[4.5,5.5,6.5,9]

Standard Unit Price	Minimum order quantity	Days to Ship	RoHS	Material	Hole Machined	Punch Hole Dia. D (Ø)	A (mm)	B (mm)	C (mm)	T (mm)	d (mm)
-	1 Piece(s)	6 Day(s) or more	10	SPCC	No Drilling Alteration	1	50 ～ 500	50 ～ 500	10 ～ 20	0.5 ～ 0.8	-
-	1 Piece(s)	6 Day(s) or more	10	SPCC	No Drilling Alteration	2	50 ～ 500	50 ～ 500	10 ～ 20	0.5 ～ 1	-
-	1 Piece(s)	6 Day(s) or more	10	SPCC	No Drilling Alteration	3	50 ～ 500	50 ～ 500	10 ～ 20	1 ～ 1.6	-
-	1 Piece(s)	6 Day(s) or more	10	SPCC	No Drilling Alteration	4	50 ～ 500	50 ～ 500	10 ～ 20	1 ～ 1.6	-
-	1 Piece(s)	6 Day(s) or more	10	SPCC	4H (Four Holes)	1	50 ～ 500	50 ～ 500	10 ～ 20	0.5 ～ 0.8	4.5 ～ 9
-	1 Piece(s)	6 Day(s) or more	10	SPCC	4H (Four Holes)	2	50 ～ 500	50 ～ 500	10 ～ 20	0.5 ～ 1	4.5 ～ 9
-	1 Piece(s)	6 Day(s) or more	10	SPCC	4H (Four Holes)	3	50 ～ 500	50 ～ 500	10 ～ 20	1 ～ 1.6	4.5 ～ 9
-	1 Piece(s)	6 Day(s) or more	10	SPCC	4H (Four Holes)	4	50 ～ 500	50 ～ 500	10 ～ 20	1 ～ 1.6	4.5 ～ 9
-	1 Piece(s)	6 Day(s) or more	10	SPCC	4H (Four Holes)	5	50 ～ 500	50 ～ 500	10 ～ 20	1 ～ 1.6	4.5 ～ 9
-	1 Piece(s)	6 Day(s) or more	10	SPCC	No Drilling Alteration	5	50 ～ 500	50 ～ 500	10 ～ 20	1 ～ 1.6	-
-	1 Piece(s)	6 Day(s) or more	10	SPCC	6H (Six Holes)	1	50 ～ 500	50 ～ 500	10 ～ 20	0.5 ～ 0.8	4.5 ～ 9
-	1 Piece(s)	6 Day(s) or more	10	SPCC	6H (Six Holes)	2	50 ～ 500	50 ～ 500	10 ～ 20	0.5 ～ 1	4.5 ～ 9
-	1 Piece(s)	6 Day(s) or more	10	SPCC	6H (Six Holes)	3	50 ～ 500	50 ～ 500	10 ～ 20	1 ～ 1.6	4.5 ～ 9
-	1 Piece(s)	6 Day(s) or more	10	SPCC	6H (Six Holes)	4	50 ～ 500	50 ～ 500	10 ～ 20	1 ～ 1.6	4.5 ～ 9
-	1 Piece(s)	6 Day(s) or more	10	SPCC	6H (Six Holes)	5	50 ～ 500	50 ～ 500	10 ～ 20	1 ～ 1.6	4.5 ～ 9
-	1 Piece(s)	6 Day(s) or more	10	SPCC	6HV (Six Holes, Vertical)	1	50 ～ 500	50 ～ 500	10 ～ 20	0.5 ～ 0.8	4.5 ～ 9
-	1 Piece(s)	6 Day(s) or more	10	SPCC	6HV (Six Holes, Vertical)	2	50 ～ 500	50 ～ 500	10 ～ 20	0.5 ～ 1	4.5 ～ 9
-	1 Piece(s)	6 Day(s) or more	10	SPCC	6HV (Six Holes, Vertical)	3	50 ～ 500	50 ～ 500	10 ～ 20	1 ～ 1.6	4.5 ～ 9
-	1 Piece(s)	6 Day(s) or more	10	SPCC	6HV (Six Holes, Vertical)	4	50 ～ 500	50 ～ 500	10 ～ 20	1 ～ 1.6	4.5 ～ 9
-	1 Piece(s)	6 Day(s) or more	10	SPCC	6HV (Six Holes, Vertical)	5	50 ～ 500	50 ～ 500	10 ～ 20	1 ～ 1.6	4.5 ～ 9
-	1 Piece(s)	6 Day(s) or more	10	SPCC	8H (Eight Holes)	1	50 ～ 500	50 ～ 500	10 ～ 20	0.5 ～ 0.8	4.5 ～ 9
-	1 Piece(s)	6 Day(s) or more	10	SPCC	8H (Eight Holes)	2	50 ～ 500	50 ～ 500	10 ～ 20	0.5 ～ 1	4.5 ～ 9
-	1 Piece(s)	6 Day(s) or more	10	SPCC	8H (Eight Holes)	3	50 ～ 500	50 ～ 500	10 ～ 20	1 ～ 1.6	4.5 ～ 9
-	1 Piece(s)	6 Day(s) or more	10	SPCC	8H (Eight Holes)	4	50 ～ 500	50 ～ 500	10 ～ 20	1 ～ 1.6	4.5 ～ 9
-	1 Piece(s)	6 Day(s) or more	10	SPCC	8H (Eight Holes)	5	50 ～ 500	50 ～ 500	10 ～ 20	1 ～ 1.6	4.5 ～ 9
-	1 Piece(s)	6 Day(s) or more	10	SUS304	No Drilling Alteration	1	50 ～ 500	50 ～ 500	10 ～ 20	0.5 ～ 0.8	-
-	1 Piece(s)	6 Day(s) or more	10	SUS304	No Drilling Alteration	2	50 ～ 500	50 ～ 500	10 ～ 20	1	-
-	1 Piece(s)	6 Day(s) or more	10	SUS304	No Drilling Alteration	3	50 ～ 500	50 ～ 500	10 ～ 20	1 ～ 1.5	-
-	1 Piece(s)	6 Day(s) or more	10	SUS304	No Drilling Alteration	4	50 ～ 500	50 ～ 500	10 ～ 20	1.5	-
-	1 Piece(s)	6 Day(s) or more	10	SUS304	4H (Four Holes)	1	50 ～ 500	50 ～ 500	10 ～ 20	0.5 ～ 0.8	4.5 ～ 9
-	1 Piece(s)	6 Day(s) or more	10	SUS304	4H (Four Holes)	2	50 ～ 500	50 ～ 500	10 ～ 20	1	4.5 ～ 9
-	1 Piece(s)	6 Day(s) or more	10	SUS304	4H (Four Holes)	3	50 ～ 500	50 ～ 500	10 ～ 20	1 ～ 1.5	4.5 ～ 9
-	1 Piece(s)	6 Day(s) or more	10	SUS304	4H (Four Holes)	4	50 ～ 500	50 ～ 500	10 ～ 20	1 ～ 1.5	4.5 ～ 9
-	1 Piece(s)	6 Day(s) or more	10	SUS304	4H (Four Holes)	5	50 ～ 500	50 ～ 500	10 ～ 20	1 ～ 1.5	4.5 ～ 9
-	1 Piece(s)	6 Day(s) or more	10	SUS304	No Drilling Alteration	5	50 ～ 500	50 ～ 500	10 ～ 20	1 ～ 1.5	-
-	1 Piece(s)	6 Day(s) or more	10	SUS304	6H (Six Holes)	1	50 ～ 500	50 ～ 500	10 ～ 20	0.5 ～ 0.8	4.5 ～ 9
-	1 Piece(s)	6 Day(s) or more	10	SUS304	6H (Six Holes)	2	50 ～ 500	50 ～ 500	10 ～ 20	1	4.5 ～ 9
-	1 Piece(s)	6 Day(s) or more	10	SUS304	6H (Six Holes)	3	50 ～ 500	50 ～ 500	10 ～ 20	1 ～ 1.5	4.5 ～ 9
-	1 Piece(s)	6 Day(s) or more	10	SUS304	6H (Six Holes)	4	50 ～ 500	50 ～ 500	10 ～ 20	1 ～ 1.5	4.5 ～ 9
-	1 Piece(s)	6 Day(s) or more	10	SUS304	6H (Six Holes)	5	50 ～ 500	50 ～ 500	10 ～ 20	1 ～ 1.5	4.5 ～ 9
-	1 Piece(s)	6 Day(s) or more	10	SUS304	6HV (Six Holes, Vertical)	1	50 ～ 500	50 ～ 500	10 ～ 20	0.5 ～ 0.8	4.5 ～ 9
-	1 Piece(s)	6 Day(s) or more	10	SUS304	6HV (Six Holes, Vertical)	2	50 ～ 500	50 ～ 500	10 ～ 20	1	4.5 ～ 9
-	1 Piece(s)	6 Day(s) or more	10	SUS304	6HV (Six Holes, Vertical)	3	50 ～ 500	50 ～ 500	10 ～ 20	1 ～ 1.5	4.5 ～ 9
-	1 Piece(s)	6 Day(s) or more	10	SUS304	6HV (Six Holes, Vertical)	4	50 ～ 500	50 ～ 500	10 ～ 20	1 ～ 1.5	4.5 ～ 9
-	1 Piece(s)	6 Day(s) or more	10	SUS304	6HV (Six Holes, Vertical)	5	50 ～ 500	50 ～ 500	10 ～ 20	1 ～ 1.5	4.5 ～ 9
-	1 Piece(s)	6 Day(s) or more	10	SUS304	8H (Eight Holes)	1	50 ～ 500	50 ～ 500	10 ～ 20	0.5 ～ 0.8	4.5 ～ 9
-	1 Piece(s)	6 Day(s) or more	10	SUS304	8H (Eight Holes)	2	50 ～ 500	50 ～ 500	10 ～ 20	1	4.5 ～ 9
-	1 Piece(s)	6 Day(s) or more	10	SUS304	8H (Eight Holes)	3	50 ～ 500	50 ～ 500	10 ～ 20	1 ～ 1.5	4.5 ～ 9
-	1 Piece(s)	6 Day(s) or more	10	SUS304	8H (Eight Holes)	4	50 ～ 500	50 ～ 500	10 ～ 20	1 ～ 1.5	4.5 ～ 9
-	1 Piece(s)	6 Day(s) or more	10	SUS304	8H (Eight Holes)	5	50 ～ 500	50 ～ 500	10 ～ 20	1 ～ 1.5	4.5 ～ 9

Specifications/Overview

[ ! ]A ≥ B
[!] It is spot welded and there will be welding marks. Welding locations are arbitrary.
[ ! ] Hole positions on frames cannot be specified.

Product TOP

Basic Information

Specifications	Framed Type

Configure

50 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

Material
- SUS304
- SPCC
Clear
Hole Machined
- 4H (Four Holes)
- 6H (Six Holes)
- 6HV (Six Holes, Vertical)
- 8H (Eight Holes)
- No Drilling Alteration
Clear
Punch Hole Dia. D(Ø)
- 1
- 2
- 3
- 4
- 5
Clear
A(mm)
[50-500/1mm Unit(s)]
Clear
B(mm)
[50-500/1mm Unit(s)]
Clear
C(mm)
10

15

20
Clear
T(mm)
0.5

0.8

1

1.2

1.5

1.6
Clear
d(mm)
4.5

5.5

6.5

9
Clear
type
- PMSF
- PMUF
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

6 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Additional Products in this Category

Complementary Products

Phillips Pan Head Screws with Washer Set
MISUMI Standard Price : MYR 0.93- Days to Ship : 1 Day(s) or more
Plastic Panel Bracket - 90° Rotational Installation
MISUMI Standard Price : MYR 8.49- Days to Ship : 1 Day(s) or more
Aluminum T-Stopper Panel Bracket, 3-5mm Panel Compatible
MISUMI Standard Price : MYR 8.49- Days to Ship : 1 Day(s) or more

Customers Who Viewed This Item Also Viewed

Perforated Metal Sheets with Rim - Fixed Dimension
MISUMI

Days to Ship : 4 Day(s) or more
Perforated Metal Sheets - 60° Staggered Round Holes
MISUMI

Days to Ship : 6 Day(s) or more
Perforated Metal Sheets - Parallel Round Holes / Slots
MISUMI

Days to Ship : 6 Day(s) or more
Stainless steel punching (SUS304)
HIKARI

Standard Price : MYR 78.05-

Days to Ship : 8 Day(s)
Aluminum Punching
HIKARI

Standard Price : MYR 47.08-

Days to Ship : 8 Day(s)
Perforated Metal Sheets - L-Shaped / U-Shaped
MISUMI

Days to Ship : 8 Day(s) or more
Expanded Metal Mesh - Framed Type
MISUMI

Days to Ship : 8 Day(s) or more
Perforated Metal Sheets - Standard Circular / Framed Circular
MISUMI

Days to Ship : 8 Day(s) or more
Mesh With Frame
MISUMI

Days to Ship : 15 Day(s) or more
Expanded Metal Mesh - Unframed Type
MISUMI

Days to Ship : 6 Day(s) or more
Cover Panels - Standard / Hole Machined Type
MISUMI

Days to Ship : 12 Day(s) or more
Net Plates - Unframed / Framed Type
MISUMI

Days to Ship : 6 Day(s) or more

back next

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations): Tel：(60) 3 7890 6399; 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday); Technical Inquiry

How can we improve?

Perforated Metal Sheets - Framed Type (Part Numbers)

Dimensional Drawing

Specification Table

Part Number

Specifications/Overview

Basic Information

Configure

Specification/Dimensions

Material

Hole Machined

Punch Hole Dia. D(Ø)

A(mm)

B(mm)

C(mm)

T(mm)

d(mm)

type

CAD

Days to Ship

Specify Alterations

Additional Products in this Category

Complementary Products

Customers Who Viewed This Item Also Viewed

Tech Support

Payment Method

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm, 9am – 1pm(Sat) * Order cut-off time is 12pm