[Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

High Torque Timing Pulleys S5M Type (Part Numbers)

Click this image to zoom it.

Move the mouse over the image to zoom

[Material]
· Pulley: Aluminum alloy, S45C equivalent, SUS304
· Flange: Aluminum alloy, SPCC, SUS304
[Surface treatment]
· Clear anodize, black anodize, hard clear anodize (firm hardness 300HV~), electroless nickel plating, black iron oxide coating

(i)Caution

Please note that the swaged flange options, NFC, RFC, and LFC, are not reflected in the CAD data.
Please check the content on our website as the PDF does not contain the most up-to-date information.

Part Number

Configured Part Number is shown.

Dimensional Drawing

■S5M

● Pulley Shape

Shape A

Shape B

Standard Tooth Profile

[ ! ]

Tooth groove dimensions slightly vary according to the number of teeth. (Pitch: 5.0mm)

■Belt Nominal Width / Dimensions

mm	Nominal
mm	S5M100	S5M150	S5M200	S5M250
A	11	17	22	27
W	16	22	27	32
L	28	34	39	44

■Tapped Hole Dimensions (Shaft Bore Specs.: P, N, C)

d_H7 Shaft Bore I.D.	M (Coarse)	Accessory Set Screws	Number of Accessories Included
5	M3	M3 × 3	2
6 to 12	M4	M4 × 3
13 to 17	M5	M5 × 4
18 to 30	M6	M6 × 5
31 to 45	M8	M8 × 6
46 to 70	M10	M10 × 8

[ ! ] No specification is set for the tightening torque
of the set screw.

Dimensional tolerances without command

Dimension Range		Tolerance (mm)
Over	or Less	Tolerance (mm)
0.5	3	±0.1
3	6	±0.1
6	30	±0.2
30	120	±0.3

[ ! ] Compliant with JIS B 0405 Class m (Medium Class).

[ ! ] For aluminum and stainless steel flanges, the flange thickness is 1.5.
[ ! ] Shaft Bore Specs. H (Round hole), V or F (Stepped Hole), Y (Both Sides Stepped Hole) and WB (Two-stepped Hole) do not have tapped holes.
[ ! ] The tolerance of the tap position dimension from the boss end face and pulley end face is ±0.3.
[ ! ] Unless otherwise specified except for teeth and F dimensions, the dimension tolerance conforms to JIS B 0405 Class m.
[ ! ] Compatible with S5M type from Mitsuboshi Belting Ltd. as well as Bando Chemical Industries Ltd.

●Shaft Bore Specification　Select shaft bore spec mark and each dim. from the table below.
[ ! ] Surface treatment may not be applied to shaft bores.
[ ! ] No standard value is specified for chamfering of d dim.

H Round Hole

P Round Hole + Tap

[ ! ] For A-Shape pulley, the screw
holes are set at around 120°
to keep awayfrom peaks.

N New JIS Keyway + Tap
C Old JIS Keyway + Tap

[ ! ] Specify NK10 when selecting "New JIS Keywayed Bore"+"Shaft Bore Diameter 10"+"Keyway Width 4.0 mm".
[ ! ] The difference between part number N10 and NK10 is the machining dimensions.
See the table below, "New JIS Keyway Dimension Tolerance," for details.
[ ! ]The position of the keyway and the phase of the teeth are not guaranteed.

V Stepped Hole

[ ! ] Z-V(d) ≥ 2
[ ! ] 2.0 ≤ J ≤ W-2.0

F Stepped Hole (Counterbored
Hole on the Hub Side)

[ ! ] Applicable to Shape B only
[ ! ] Z-F(d) ≥ 2
[ ! ] 2.0 ≤ J ≤ L-2.0

Y Both Ends Stepped Hole

[ ! ] Applicable to Shape A only
[ ! ] Q-Y(d) ≥ 2
[ ! ] R-Y(d) ≥ 2
[ ! ] S+T ≤ W-3.0
[ ! ] S (T) ≥ 3.0

WB Two-stepped Hole

[ ! ] Applicable to Shape A only
[ ! ] Q-R ≥ 2
[ ! ] R-WB(d) ≥ 2
[ ! ] S+T ≤ W-3.0
[ ! ] S (T) ≥ 3.0

■Keyway Dimension Table

d Dimensional Tolerance (H7)

Nominal(N,C)	d_H7
8 to 10(K)	＋0.015 0
11 to 18	＋0.018 0
19 to 30	＋0.021 0
31 to 50	＋0.025 0
51 to 70	＋0.030 0

New JIS Keyway Dimension Tolerance

Nominal(N)	b_JS9		t
8 to 10	3	±0.0125	1.4	＋0.1 0
10K to 12	4	±0.0150	1.8
13 to 17	5		2.3
18 to 22	6		2.8
23 to 30	8	±0.0180	3.3	＋0.2 0
31 to 38	10	±0.0180
39 to 44	12	±0.0215
45 to 50	14		3.8
55	16		4.3

Old JIS Keyway Dimension Tolerance

Nominal(C)	b_JS9		t
10 to 12	4	＋0.022 ＋0.010	1.5	＋0.1 0
15 to 20	5		2

■Pulley Shape and Shaft Bore Machining Table

Shape	Hole
Shape	H	P	N(C)	V	F	Y	WB
A	○	○	○	○	‐	○	○
B	○	○	○	○	○	‐	‐

Type	Belt Width				[ M ] Material		[ S ] Surface Treatment	[ A ] Accessory Set Screws
	10 mm	15 mm	20 mm	25 mm	Pulley	Flange
	S5M100	S5M150	S5M200	S5M250	Pulley	Flange
HTPA	●	●	●	●	Aluminum alloy	Aluminum alloy	Clear Anodize	SUS304
HTPB	●	●	●	●			Black Anodize
HTPK	●	●	●	●			Hard Clear Anodize
HTPN	●	●	●	●			Electroless nickel plating
HTPT	●	●	●	●	S45C Equivalent	SPCC	-	SCM435 (Black Oxide)
HTPM	●	●	●	●			Black Oxide Coating
HTPP	●	●	●	●			Electroless nickel plating
HTPS	●	●	●	●	SUS304	SUS304	-	SUS304

[ ! ] Flange is already swaged, and set screws are included for Shaft Bores P, N and C.
[ ! ] Due to vibrations during transportation, the set screw may become detached from the main body.
[ ! ] For orders with no flange, please specify the alteration NFC.

Specification Table

Part number

Pulley Shape

Shaft Bore Specs.: I.D.

(Shaft Bore Specs.: H, P, N, C)

HTPA20S5M150

NK10

(Shaft Bore Specs.: V, F)

HTPA26S5M150

V10

Z23

J16.0

(Shaft Bore Specs.: Y, WB)

HTPA40S5M250

Y17

Q35

R35

S10

T10

Part number			Pulley Shape	Pulley Shape						P.D.	O.D	D	F	E
Type	Number of Teeth	Type Nominal Width		A			B
				Shaft Bore Specs.
				H Round Hole V·Y·WB Stepped Hole	P Round Hole Tapped	N·C Keyway Tapped	H Round Hole V·F Stepped Hole	P Round Hole Tapped	N·C Keyway Tapped
				d1 mm increments / Selectable
Aluminum HTPA HTPB HTPK HTPN Steel HTPT HTPM HTPP Stainless Steel HTPS	14	S5M100 S5M150 S5M200 S5M250	A B	5 to 12	5 to 10	8·10	5 to 10	5 to 8	-	22.28	21.32	14	26	16
	15			5 to 14			5 to 11			23.87	22.91	15	28	18
	16			5 to 16	5 to 12	8 to 12	5 to 13	5 to 10	8	25.46	24.50	17	32	20
	17									27.06	26.10
	18			6 to 18	6 to 12		6 to 15	6 to 11	8·10	28.65	27.69	19	33	22
	19			6 to 20	6 to 16	8 to 16				30.24	29.28		36	24
	20									31.83	30.87
	21			7 to 23	7 to 18	8 to 18	7 to 20	7 to 16	8 to 12	33.42	32.46	24	40	27
	22									35.01	34.05
	23			7 to 26	7 to 20	8 to 20	7 to 23	7 to 17	8 to 13	36.61	35.65	27	45	30
	24									38.20	37.24
	25								8 to 15	39.79	38.83
	26			8 to 31	8 to 23	8 to 22	8 to 27	8 to 21	8 to 17	41.38	40.42	31	48	35
	27				8 to 24	8 to 24	8 to 28	8 to 22	8 to 18	42.97	42.01	32
	28									44.56	43.60
	29			10 to 32	10 to 26	10 to 26	10 to 29	10 to 23	10 to 18	46.15	45.19	33	52	36
	30									47.75	46.79
	31			10 to 36	10 to 28	10 to 28	10 to 33	10 to 27	10 to 22	49.34	48.38	37	55	40
	32									50.93	49.97
	33									52.52	51.56		58
	34			10 to 41	10 to 33	10 to 33	10 to 36	10 to 30	10 to 25	54.11	53.15	40	61	45
	35									55.70	54.74
	36									57.30	56.34
	37			10 to 46	10 to 38	10 to 38	10 to 43	10 to 35	10 to 28	58.89	57.93	47	67	50
	38									60.48	59.52
	39									62.07	61.11
	40									63.66	62.70
	41			12 to 52	12 to 40	12 to 38	12 to 44	12 to 36	12 to 30	65.25	64.29	48	70	56
	42									66.85	65.89
	43			12 to 54	12 to 42	12 to 40	12 to 46	12 to 38	12 to 32	68.44	67.48	50	74	58
	44									70.03	69.07
	45			12 to 56	12 to 43	12 to 40	12 to 52	12 to 40	12 to 36	71.62	70.66	56	80	60
	46									73.21	72.25
	47									74.80	73.84
	48			12 to 59	12 to 45		12 to 56	12 to 45	12 to 40	76.39	75.43	60	83	63
	49									77.99	77.03
	50			12 to 63	12 to 50	12 to 43	12 to 59	12 to 47	12 to 43	79.58	78.62	63	87	67
	51									81.17	80.21
	52									82.76	81.80
	53			12 to 71		12 to 45	12 to 66	12 to 48	12 to 45	84.35	83.39	70	95	75
	54									85.94	84.98
	55									87.54	86.58
	56			12 to 76		12 to 50	12 to 71	12 to 50	12 to 50	89.13	88.17	75	99	80
	57									90.72	89.76
	58									92.31	91.35
	59									93.90	92.94
	60									95.49	94.53
	72			12 to 85	12 to 70	12 to 55	12 to 80	12 to 70	12 to 55	114.59	113.63	90	119	100
[ ! ] Shaft Bore Dia. 6.35 is selectable for Shaft Bore Specs. H, P, V, and F. [ NG ] Shaft Bore Dia. 9, 51 to 54 are not available for Shaft Bore Spec. N. [ NG ] Shaft Bore Dia. 8, 11, 13, 14, 17, or 21 to 55 are not available for Shaft Bore Spec. C.

Alterations

Part number

Pulley Shape

Shaft Bore Specs.: I.D.

(KC90, etc.)

HTPM60S5M150

H30

KSC50

Alterations	Set Screw Angle Change	No Flange	Single Flange	Flange Cut
Code	KC90	NFC	RFC·LFC	FC
Spec.	Changes an angle of set screw to 90°. [ ! ] For A-Shape pulley, the screw holes are set at around 90° to keep away from peaks.	(Flange 2 pcs. Included) Ordering Code NFC	(Flange 1 pc. Included) Ordering Code RFC	Cut the flange O.D. in 0.5 mm increments. Ordering Code FC17 Application Notes [ ! ] FC ≥ (O.D.) +1 [ ! ] FC ≤ F-2 [ ! ] No surface treatment is applied on flange circumference.

Alterations

Retaining Ring Groove

Taper for Bearing Holder

Hub Shortening

Tapped Hole Dimensions

Included Set Screw Length Change

Code

SRG

BTC

TPC

SLH

Spec.

Retaining Ring Groove applicable to the shaft dia. of stepped hole is machined.

Specify SRG 2.5-24.5 mm
0.5 mm Increments
Application Notes
[ ! ] Minimum Thickness: 2 mm
[ ! ] Applicable to Shaft Bore
Specs. V and F only
[ ! ] Standards of retaining ring groove for Z dim. is applied
[ ! ] n ≤ J-SRG-m
Ordering Code SRG7

Taper for retaining bearing inner ring

Ordering Code BTC6-TL1.5
Application Notes
[ ! ] Applicable to Shape A only
[ ! ] Applicable to Shaft Bore
Specs. H and P only

[ ! ] TL < L-W
[ ! ] When E-D ≤ 6, one side installed
and 1 pc. of flange included

Cuts the hub length in 0.5 mm increments.
Ordering Code BC6.5
Application Notes

[ ! ] Shaft Bore Specs.
H, V, F:
3 ≤ BC < L-W
[ ! ] Shaft Bore Specs.
P, N, C:
M+3 ≤ BC < L-W
[ NG ] Not applicable to Shape A

Ordering Code TPC5
Application Notes

[ ! ] Applicable to Shaft Bore Specs. P, N, C only

M	TPC
M3	M4
M4	M3·M5
M5	M4·M6
M6	M5·M8
M8	M6·M10
M10	M8

Ordering Code SLH10
Application Notes

[ ! ] Applicable to Shaft Bore Specs. P, N, C only

Set Screws	SLH
M3 × 3	6
M4 × 3	5·8
M5 × 4	6·10
M6 × 5	10
M8 × 6	10·12
M10 × 8	12·15

Alterations	Add Side Holes
Alterations	Side Tapped Hole	Side Through Hole	Side Counterbored
Code	QTC·QFC·QSC	KTC·KFC·KSC	ZTC·ZFC·ZSC
Spec.	Machines tapped hole on the side surface of hub side. Ordering Code QTC28-M4 Q□C Selection Specify the hole position (P. C. D. dim.). M Selection M3, M4, M5, M6, M8 Application Notes [ ! ] Thickness condition: minimum 2 mm. (6 Locations) (4 Locations) (3 Locations)	Machines through hole on the side surface. Ordering Code KTC28-K4.5 K□C Selection Specify the hole position (P. C. D. dim.). Specify K K4.0 to 13.0 (0.5 mm Increments) Application Notes [ ! ] Thickness condition: minimum 2 mm. (6 Locations) (4 Locations) (3 Locations)	Machines counterbored hole on the side surface. Ordering Code ZTC28-ZM4 Z□C Selection Specify the hole position (P. C. D. dim.). ZM Selection ZM3, ZM4, ZM5, ZM6, ZM8 Application Notes [ ! ] Thickness condition: minimum 2 mm. (6 Locations) (4 Locations) (3 Locations)

[ ! ] Conditions for side hole alteration vary depending on the shaft bore specification.

Part Number

CAD Data download and 3D preview are not available because the part number has not yet been determined.

*In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.

CAD Download

: 30; 60; 90

1
2
3
4
5
Next >>

Part Number
HTPA14S5M100-A-C10
HTPA14S5M100-A-H6.35
HTPA14S5M100-A-H[5-10/1]
HTPA14S5M100-A-N[8,10]
HTPA14S5M100-A-NK10
HTPA14S5M100-A-P6.35
HTPA14S5M100-A-P[5-10/1]
HTPA14S5M100-A-V[5-6/1]
HTPA14S5M100-A-Y[5-6/1]
HTPA14S5M100-B-F[5-6/1]
HTPA14S5M100-B-H6.35
HTPA14S5M100-B-H[5-10/1]
HTPA14S5M100-B-P[5,6,6.35,7,8]
HTPA14S5M100-B-V[5-6/1]
HTPA14S5M150-A-C10
HTPA14S5M150-A-H6.35
HTPA14S5M150-A-H[5-10/1]
HTPA14S5M150-A-N[8,10]
HTPA14S5M150-A-NK10
HTPA14S5M150-A-P6.35
HTPA14S5M150-A-P[5-10/1]
HTPA14S5M150-A-V[5-6/1]
HTPA14S5M150-A-Y[5-6/1]
HTPA14S5M150-B-F[5-6/1]
HTPA14S5M150-B-H6.35
HTPA14S5M150-B-H[5-10/1]
HTPA14S5M150-B-P[5,6,6.35,7,8]
HTPA14S5M150-B-V[5-6/1]
HTPA14S5M250-A-C10
HTPA14S5M250-A-H6.35
HTPA14S5M250-A-H[5-10/1]
HTPA14S5M250-A-N[8,10]
HTPA14S5M250-A-NK10
HTPA14S5M250-A-P6.35
HTPA14S5M250-A-P[5-10/1]
HTPA14S5M250-A-V[5-6/1]
HTPA14S5M250-A-Y[5-6/1]
HTPA14S5M250-B-F[5-6/1]
HTPA14S5M250-B-H6.35
HTPA14S5M250-B-H[5-10/1]
HTPA14S5M250-B-P[5,6,6.35,7,8]
HTPA14S5M250-B-V[5-6/1]
HTPA15S5M100-A-C10
HTPA15S5M100-A-H6.35
HTPA15S5M100-A-H[5-10/1]
HTPA15S5M100-A-N[8,10]
HTPA15S5M100-A-NK10
HTPA15S5M100-A-P6.35
HTPA15S5M100-A-P[5-10/1]
HTPA15S5M100-A-V[5,6,6.35,7,8]
HTPA15S5M100-A-Y[5,6,7,8]
HTPA15S5M100-B-F[5,6,6.35,7,8]
HTPA15S5M100-B-H6.35
HTPA15S5M100-B-H[5-10/1]
HTPA15S5M100-B-P[5,6,6.35,7,8]
HTPA15S5M100-B-V[5,6,6.35,7,8]
HTPA15S5M150-A-C10
HTPA15S5M150-A-H6.35
HTPA15S5M150-A-H[5-10/1]
HTPA15S5M150-A-N[8,10]
HTPA15S5M150-A-NK10
HTPA15S5M150-A-P6.35
HTPA15S5M150-A-P[5-10/1]
HTPA15S5M150-A-V[5,6,6.35,7,8]
HTPA15S5M150-A-Y[5,6,7,8]
HTPA15S5M150-B-F[5,6,6.35,7,8]
HTPA15S5M150-B-H6.35
HTPA15S5M150-B-H[5-10/1]
HTPA15S5M150-B-P[5,6,6.35,7,8]
HTPA15S5M150-B-V[5,6,6.35,7,8]
HTPA15S5M250-A-C10
HTPA15S5M250-A-H6.35
HTPA15S5M250-A-H[5-10/1]
HTPA15S5M250-A-N[8,10]
HTPA15S5M250-A-NK10
HTPA15S5M250-A-P6.35
HTPA15S5M250-A-P[5-10/1]
HTPA15S5M250-A-V[5,6,6.35,7,8]
HTPA15S5M250-A-Y[5,6,7,8]
HTPA15S5M250-B-F[5,6,6.35,7,8]
HTPA15S5M250-B-H6.35
HTPA15S5M250-B-H[5-10/1]
HTPA15S5M250-B-P[5,6,6.35,7,8]
HTPA15S5M250-B-V[5,6,6.35,7,8]
HTPA16S5M100-A-C[10,12]
HTPA16S5M100-A-H6.35
HTPA16S5M100-A-H[5-16/1]
HTPA16S5M100-A-N[8,10,11,12]
HTPA16S5M100-A-NK10
HTPA16S5M100-A-P6.35

Standard Unit Price	Minimum order quantity	Days to Ship	RoHS	Belt Width Used (mm)	No. of Teeth (T)	Pulley Shape	Material	Surface Treatment	Shaft Bore Specifications (Both Ends Stepped Hole) [Y] (mm)	Shaft Bore Specifications (New JIS Keyway Hole + Tap) [N] (mm)	Shaft Bore Specifications (Old JIS Keyway Hole + Tap) [C] (mm)	Shaft Bore Specifications (Round Hole + Tap) [P] (mm)	Shaft Bore Specifications (Round Hole) [H] (mm)	Shaft Bore Specifications (Shaft Bore Dia. 10 Keyway Width 4mm Height 1.8mm) [NK]	Shaft Bore Specifications (Stepped Hole) [V] (mm)	Shaft Bore Specifications (Stepped Hole: Counterbored Holes on the Hub Side) [F] (mm)	Shaft Bore Specifications (Two-stepped Hole) [WB] (mm)
-	1 Piece(s)	6 Day(s)	10	10	14	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	10	-	-	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	10	14	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	6.35	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	10	14	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	5 ～ 10	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	10	14	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	8 ～ 10	-	-	-	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	10	14	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	-	10	-	-	-
-	1 Piece(s)	6 Day(s)	10	10	14	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	6.35	-	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	10	14	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	5 ～ 10	-	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	10	14	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	-	-	5 ～ 6	-	-
-	1 Piece(s)	6 Day(s)	10	10	14	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	5 ～ 6	-	-	-	-	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	10	14	Shape B	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	-	-	-	5 ～ 6	-
-	1 Piece(s)	6 Day(s)	10	10	14	Shape B	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	6.35	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	10	14	Shape B	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	5 ～ 10	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	10	14	Shape B	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	5 ～ 8	-	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	10	14	Shape B	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	-	-	5 ～ 6	-	-
-	1 Piece(s)	6 Day(s)	10	15	14	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	10	-	-	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	15	14	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	6.35	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	15	14	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	5 ～ 10	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	15	14	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	8 ～ 10	-	-	-	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	15	14	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	-	10	-	-	-
-	1 Piece(s)	6 Day(s)	10	15	14	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	6.35	-	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	15	14	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	5 ～ 10	-	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	15	14	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	-	-	5 ～ 6	-	-
-	1 Piece(s)	6 Day(s)	10	15	14	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	5 ～ 6	-	-	-	-	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	15	14	Shape B	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	-	-	-	5 ～ 6	-
-	1 Piece(s)	6 Day(s)	10	15	14	Shape B	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	6.35	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	15	14	Shape B	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	5 ～ 10	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	15	14	Shape B	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	5 ～ 8	-	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	15	14	Shape B	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	-	-	5 ～ 6	-	-
-	1 Piece(s)	6 Day(s)	10	25	14	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	10	-	-	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	25	14	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	6.35	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	25	14	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	5 ～ 10	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	25	14	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	8 ～ 10	-	-	-	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	25	14	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	-	10	-	-	-
-	1 Piece(s)	6 Day(s)	10	25	14	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	6.35	-	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	25	14	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	5 ～ 10	-	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	25	14	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	-	-	5 ～ 6	-	-
-	1 Piece(s)	6 Day(s)	10	25	14	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	5 ～ 6	-	-	-	-	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	25	14	Shape B	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	-	-	-	5 ～ 6	-
-	1 Piece(s)	6 Day(s)	10	25	14	Shape B	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	6.35	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	25	14	Shape B	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	5 ～ 10	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	25	14	Shape B	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	5 ～ 8	-	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	25	14	Shape B	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	-	-	5 ～ 6	-	-
-	1 Piece(s)	6 Day(s)	10	10	15	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	10	-	-	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	10	15	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	6.35	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	10	15	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	5 ～ 10	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	10	15	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	8 ～ 10	-	-	-	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	10	15	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	-	10	-	-	-
-	1 Piece(s)	6 Day(s)	10	10	15	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	6.35	-	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	10	15	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	5 ～ 10	-	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	10	15	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	-	-	5 ～ 8	-	-
-	1 Piece(s)	6 Day(s)	10	10	15	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	5 ～ 8	-	-	-	-	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	10	15	Shape B	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	-	-	-	5 ～ 8	-
-	1 Piece(s)	6 Day(s)	10	10	15	Shape B	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	6.35	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	10	15	Shape B	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	5 ～ 10	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	10	15	Shape B	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	5 ～ 8	-	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	10	15	Shape B	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	-	-	5 ～ 8	-	-
-	1 Piece(s)	6 Day(s)	10	15	15	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	10	-	-	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	15	15	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	6.35	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	15	15	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	5 ～ 10	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	15	15	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	8 ～ 10	-	-	-	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	15	15	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	-	10	-	-	-
-	1 Piece(s)	6 Day(s)	10	15	15	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	6.35	-	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	15	15	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	5 ～ 10	-	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	15	15	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	-	-	5 ～ 8	-	-
-	1 Piece(s)	6 Day(s)	10	15	15	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	5 ～ 8	-	-	-	-	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	15	15	Shape B	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	-	-	-	5 ～ 8	-
-	1 Piece(s)	6 Day(s)	10	15	15	Shape B	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	6.35	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	15	15	Shape B	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	5 ～ 10	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	15	15	Shape B	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	5 ～ 8	-	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	15	15	Shape B	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	-	-	5 ～ 8	-	-
-	1 Piece(s)	6 Day(s)	10	25	15	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	10	-	-	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	25	15	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	6.35	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	25	15	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	5 ～ 10	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	25	15	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	8 ～ 10	-	-	-	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	25	15	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	-	10	-	-	-
-	1 Piece(s)	6 Day(s)	10	25	15	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	6.35	-	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	25	15	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	5 ～ 10	-	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	25	15	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	-	-	5 ～ 8	-	-
-	1 Piece(s)	6 Day(s)	10	25	15	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	5 ～ 8	-	-	-	-	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	25	15	Shape B	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	-	-	-	5 ～ 8	-
-	1 Piece(s)	6 Day(s)	10	25	15	Shape B	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	6.35	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	25	15	Shape B	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	5 ～ 10	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	25	15	Shape B	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	5 ～ 8	-	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	25	15	Shape B	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	-	-	5 ～ 8	-	-
-	1 Piece(s)	6 Day(s)	10	10	16	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	10 ～ 12	-	-	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	10	16	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	6.35	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	10	16	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	5 ～ 16	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	10	16	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	8	-	-	-	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	10	16	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	-	10	-	-	-
-	1 Piece(s)	6 Day(s)	10	10	16	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	6.35	-	-	-	-	-

1
2
3
4
5
Next >>

Product TOP

Basic Information

Type	Timing Pulleys	Belt Type	S5M	Timing Pulley / Idler	Pulleys
Features, Areas of Application	Not Applicable	Environmental Compliance	RoHS compliant (10 substances)

Configure

7,637 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

Belt Width Used(mm)
10

15

25
Clear
No. of Teeth(T)
14

15

16

18

19

20

22

24

25

26

28

30

31

32

34

36

40

44

48

50

60

72
Clear
Pulley Shape
- Shape A
- Shape B
Clear
Material
- Steel
  - S45C Equivalent
- Aluminum
  - Aluminum Alloy
- SUS304
Clear
Surface Treatment
- Not Provided
- Black Oxide Coating
- Clear Anodize
- Black Anodize
- Hard Clear Anodize
- Electroless Nickel Plating
Clear
Shaft Bore Specifications (Both Ends Stepped Hole) [Y](mm)
5

6

6.35

7

8
[5-83/1mm Unit(s)]
Clear
Shaft Bore Specifications (New JIS Keyway Hole + Tap) [N](mm)
8

10

11

12

13

55
[10-55/1mm Unit(s)]
Clear
Shaft Bore Specifications (Old JIS Keyway Hole + Tap) [C](mm)
10

12

15

16

18

19

20
Clear
Shaft Bore Specifications (Round Hole + Tap) [P](mm)
5

6

6.35

7

8

12.7
[5-70/1mm Unit(s)]
Clear
Shaft Bore Specifications (Round Hole) [H](mm)
6.35

12.7
[5-85/1mm Unit(s)]
Clear
Shaft Bore Specifications (Shaft Bore Dia. 10 Keyway Width 4mm Height 1.8mm) [NK]
10
Clear
Shaft Bore Specifications (Stepped Hole) [V](mm)
5

6

6.35

7

8

9
[5-84/1mm Unit(s)]
Clear
Shaft Bore Specifications (Stepped Hole: Counterbored Holes on the Hub Side) [F](mm)
5

6

6.35

7

8

9
[5-84/1mm Unit(s)]
Clear
Shaft Bore Specifications (Two-stepped Hole) [WB](mm)
6.35
[5-83/1mm Unit(s)]
Clear
type
- HTPA□□S5M
- HTPB□□S5M
- HTPK□□S5M
- HTPM□□S5M
- HTPN□□S5M
- HTPP□□S5M
- HTPS□□S5M
- HTPT□□S5M
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

6 Day(s) or Less

7 Day(s) or Less

8 Day(s) or Less

9 Day(s) or Less

11 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Additional Products in this Category

Complementary Products

Rotary Shafts D Tolerance h9 (Cold-drawn) / h7 (Ground) / g6 (Ground) - One End Stepped and Threaded, One End Tapped
MISUMI Days to Ship : 5 Day(s) or more
Cantilever Shafts - Threaded with Retaining Ring Groove - Standard
MISUMI Days to Ship : 5 Day(s) or more
Open End Belts/Polyurethane/Chloroprene Rubber
MISUMI Days to Ship : 1 Day(s) or more

Customers Who Viewed This Item Also Viewed

High Torque Timing Pulleys S3M Type
MISUMI

Days to Ship : 6 Day(s) or more
High Torque Timing Pulleys S8M Type
MISUMI

Days to Ship : 5 Day(s) or more
High Torque Timing Belts/S5M
MISUMI

Standard Price : MYR 42.96-

Days to Ship : 1 Day(s) or more
Timing Pulleys - XL Type
MISUMI

Days to Ship : 6 Day(s) or more
Flanged Linear Bushings - Single, Opposite Counterbored Hole
MISUMI

Standard Price : MYR 21.83-

Days to Ship : 1 Day(s) or more
Single Row Deep Groove Ball Bearing (Open Type / Sealed Type / Shielded Type)
NSK

Standard Price : MYR 8.40-

Days to Ship : 1 Day(s) or more
Deep Groove Ball Bearing-Double Shielded
MISUMI

Standard Price : MYR 7.05-

Days to Ship : 1 Day(s) or more
Keyless High Torque Timing Pulleys - S5M
MISUMI

Days to Ship : 7 Day(s) or more
Timing Pulleys T5 Type
MISUMI

Days to Ship : 6 Day(s) or more
High Torque Timing Pulleys S2M Type
MISUMI

Days to Ship : 6 Day(s) or more
Timing Pulleys - L Type
MISUMI

Days to Ship : 6 Day(s) or more
Retaining Rings/External/C-Type
MISUMI

Standard Price : MYR 2.67-

Days to Ship : 1 Day(s) or more

back next

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations): Tel：(60) 3 7890 6399; 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday); Technical Inquiry

How can we improve?

High Torque Timing Pulleys S5M Type (Part Numbers)

(i)Caution

Dimensional Drawing

Specification Table

Alterations

Part Number

Basic Information

Configure

Specification/Dimensions

Belt Width Used(mm)

No. of Teeth(T)

Pulley Shape

Material

Surface Treatment

Shaft Bore Specifications (Both Ends Stepped Hole) [Y](mm)

Shaft Bore Specifications (New JIS Keyway Hole + Tap) [N](mm)

Shaft Bore Specifications (Old JIS Keyway Hole + Tap) [C](mm)

Shaft Bore Specifications (Round Hole + Tap) [P](mm)

Shaft Bore Specifications (Round Hole) [H](mm)

Shaft Bore Specifications (Shaft Bore Dia. 10 Keyway Width 4mm Height 1.8mm) [NK]

Shaft Bore Specifications (Stepped Hole) [V](mm)

Shaft Bore Specifications (Stepped Hole: Counterbored Holes on the Hub Side) [F](mm)

Shaft Bore Specifications (Two-stepped Hole) [WB](mm)

type

CAD

Days to Ship

Specify Alterations

Additional Products in this Category

Complementary Products

Customers Who Viewed This Item Also Viewed

Tech Support

Payment Method

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm, 9am – 1pm(Sat) * Order cut-off time is 12pm