(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Search Results “Misumi Economy”
Brand
Category
2 items
Loading...
Product
-
KONISHI
Male thread made of black nylon resin. The thread section is made of steel, and the surface treatment is made by trivalent chromate treatment. Operating temperature: max. 80°C, min. -20°C.
- CAD ：
- 2D
Standard Price: MYR 10.79- Days to Ship: 4 Day(s) or more -
KONISHI
Female screw made of black nylon resin. The thread is made of brass. Operating temperature max80° C min-20° C
- CAD ：
- 2D
Standard Price: MYR 13.33- Days to Ship: 5 Day(s) or more -
KONISHI
It is a male screw made of polished black polypropylene resin. The thread part is made of steel, and the surface treatment is made by trivalent chromate treatment. Operating temperature max80° C min-20° C
- CAD ：
- 2D
Standard Price: MYR 11.52 Days to Ship: 5 Day(s) or more -
KONISHI
Female screw made of matte black nylon resin. The thread part is made of brass and stainless steel. Operating temperature max80° C min-20° C
- CAD ：
- 2D
Standard Price: MYR 12.79- Days to Ship: 6 Day(s) or more -
KONISHI
It is made of matte black nylon (glass fiber reinforced) resin. The male screw is made of steel, and the surface is treated with trivalent chromate and made of stainless steel. Operating temperature max80° C min-20° C
- CAD ：
- 2D
Standard Price: MYR 13.05- Days to Ship: 5 Day(s) or more -
KONISHI
[Features]
· Made of matte black nylon (glass fiber reinforced) resin.
· Female screw part made of brass.
· Operating temperature max80° C, min-20° C.- CAD ：
- 2D
Standard Price: MYR 13.02- Days to Ship: 4 Day(s) or more -
KONISHI
Made of non-gloss black nylon (glass fiber reinforced) resin. The male thread section is made of steel, and the surface treatment is made by trivalent chromate treatment. Operating temperature -20°C to 80°C.
- CAD ：
- 2D
Standard Price: MYR 31.85- Days to Ship: 5 Day(s) or more -
KONISHI
It is made of matte black nylon (glass fiber reinforced) resin. The female screw part is made of brass. Operating temperature max80° C min-20° C
- CAD ：
- 2D
Standard Price: MYR 38.31- Days to Ship: 5 Day(s) or more -
Palm Grip Knob, Actual-Bearing Type ACKL, ACKF
KONISHI
By reducing the friction of the seating surface, it is possible to obtain an equivalent sealing force with half the effort compared to knobs of the same size. Since the tightening seat surface does not rotate, the workpiece will not be scratched. Axial bearing inside the bearing surface.
- CAD ：
- 2D
Standard Price: MYR 164.15- Days to Ship: 6 Day(s) or more -
KONISHI
Volume knob made of phenol resin.
[Features]
・ Operating temperature: -20 to +110℃
[Applications]
・ Can be used to rotate the mounting shaft- CAD ：
- 2D
Standard Price: MYR 18.93- Days to Ship: 4 Day(s) or more -
Tapped Blind Knob (Stainless Steel) BTK-L-Sus
KONISHI
It is made of black phenolic resin and has a male screw (stainless steel), and the knob has a glossy and beautiful surface. Operating temperature max110° C min-20° C
- CAD ：
- 2D
Standard Price: MYR 36.32- Days to Ship: 4 Day(s) or more -
Tapped Blind Knob (Stainless Steel) BTK-Sus
KONISHI
Tapped Blind Knob (Stainless Steel) BTK-Sus
Knobs Screws are commonly used in various applications to secure, adjust, and control different mechanical devices. They offer a wide variety of sizes to choose from.
[Feature]
● Shape : Five Lobed Knobs
● Thread Size : M6, M8, M10 and M12
● Material : SUM22L
Knob - Phenolic Plastic Black
Screws - Female Thread (SUS303)
[Application]
Knob Screws are commonly used in fastening, assembly, adjustment, clamping and so on- CAD ：
- 2D
Standard Price: MYR 57.80- Days to Ship: 5 Day(s) or more -
Engineering Plastic Knob (Stainless Steel) PK-L-Sus
KONISHI
[Features]·Male thread knob made of Nylon. [Materials]·It is made of stainless steel.
- CAD ：
- 2D
Standard Price: MYR 49.18- Days to Ship: 4 Day(s) or more -
Engineering Plastic Knob (Stainless Steel) PK-Sus
KONISHI
Variations include the center hole, reamer hole and tap hole processed in the boss center, please choose one.
- CAD ：
- 2D
Standard Price: MYR 28.89- Days to Ship: 4 Day(s) or more -
Small Knob (Stainless Steel) SK-Sus
KONISHI
Male screw made of black nylon resin. The screw is made of stainless steel. Operating temperature max80° C min-20° C
- CAD ：
- 2D
Standard Price: MYR 12.89- Days to Ship: 5 Day(s) or more -
KONISHI
Female screw made of polished black polypropylene resin. The thread part is made of steel, and the surface treatment is made by trivalent chromate treatment. Operating temperature max80° C min-20° C
- CAD ：
- 2D
Standard Price: MYR 13.04 Days to Ship: 5 Day(s) or more -
Knurling Nut Knob (Chrome Plating) KNTA, KNTB
KONISHI
A sturdy knob with vertical knurling on the outer circumference of the knob. Surface treatment is nickel chrome plating.
- CAD ：
- 2D
Standard Price: MYR 30.39- Days to Ship: 4 Day(s) or more -
Knurled Nut Knob (Black Iron Oxide Film) KNTA-B, KNTB-B
KONISHI
Knob with round knurl on the outer part of the knob. The surface treatment is black.
- CAD ：
- 2D
Standard Price: MYR 23.64- Days to Ship: 4 Day(s) or more -
MITSUBOSHI CI
It is a glossy surface product in which you can insert a molded bolt, or a specially processed reinforced plastic nut.
Standard Price: MYR 5.72- Days to Ship: 5 Day(s) or more -
G Type Knob Bolt G-1 Black【1-150 Pieces Per Package】
MITSUBOSHI CI
Heat resistance ABS cost reduction is achieved by using resin, and the bolts and nuts are securely inserted and don't move, so there is no worry of them dropping out.
Standard Price: MYR 3.65- Days to Ship: 5 Day(s) or more -
Knob Bolt R Type Number 1 Black【1-150 Pieces Per Package】
MITSUBOSHI CI
Thermo-formability, it is a knob screw that can be injected with ABS resin or a seal, etc. can be attached to the head.
- Volume Discount
Standard Price: MYR 3.80- Days to Ship: 5 Day(s) or more -
Knob Bolt R Type Number 2 Black【60-100 Pieces Per Package】
MITSUBOSHI CI
Thermo-formability, it is a knob screw that can be injected with ABS resin or a seal, etc. can be attached to the head.
Standard Price: MYR 214.87- Days to Ship: 5 Day(s) or more -
Knob Bolt R Type Number 3 (Black)【40-60 Pieces Per Package】
MITSUBOSHI CI
Thermo-formability, it is a knob screw that can be injected with ABS resin or a seal, etc. can be attached to the head.
Standard Price: MYR 209.53- Days to Ship: 5 Day(s) or more -
MITSUBOSHI CI
It is a glossy surface product in which you can insert a molded bolt, or a specially processed reinforced plastic nut.
Standard Price: MYR 7.41- Days to Ship: 5 Day(s) or more -
MITSUBOSHI CI
Body
[Type] polygonal mounting
[Type] female thread mounting portion
[Length] L (mm) 8.5 polygon
[Type] pentagon no addition function male thread end processing none set screw processing no body
[Materials] iron body
[Surface Treatment] none mounting portion
[Materials] iron mounting part
[Surface Treatment] none body outer diameter D (ø) 35 Body height t (mm) 17
[Unit of Sale] loose (available from 1 piece)Standard Price: MYR 5.57- Days to Ship: 5 Day(s) or more -
MITSUBOSHI CI
Body
[Type] polygonal mounting
[Type] female thread polygon
[Type] pentagon no addition function male thread end processing none Set screw processing no body
[Materials] iron body
[Surface Treatment] none mounting portion
[Materials] iron mounting part
[Surface treatment] none body outer diameter D (ø) 42 main body height t (mm) 18
[Unit of Sale] loose (available from 1 piece)Standard Price: MYR 7.02 Days to Ship: 5 Day(s) or more -
MITSUBOSHI CI
Body
[Type] polygonal mounting
[Type] female thread mounting portion
[Length] L (mm) 12 polygon
[Type] pentagon no addition function male thread end processing none set screw processing no body
[Materials] iron body
[Surface Treatment] none mounting portion
[Materials] iron mounting part
[Surface Treatment] none body outer diameter D (ø) 45 Body height t (mm) 20
[Unit of Sale] loose (available from 1 piece)Standard Price: MYR 8.26- Days to Ship: 5 Day(s) or more -
Super zero Oldham coupling series MMZ type aluminum alloy products
NIHON MINIATURE
Use the set screw to fix the shaft. While compact, can handle large shaft diameters.
[Features]
· Super zero Oldham coupling achieves zero backlash, with improved machining accuracy
· Stronger and more compact design, that can now be used with high precision equipment impossible until now.
· Stainless steel series added, becoming 4 series, with further improvements.
· Materials used are, engineering plastic for spacer, and stainless steel SUS303 for hubs, aluminum series uses aluminum alloy (alumite surface treatment).
· Easy to handle coupling, with low moment of inertia, large swing rigidity, good electrical insulation, and maintenance-free, easy assembly.
· Two types of super zero Oldham coupling, with set screw or collet shaft fixing methods both available, that can be freely combined.
· Stainless steel has no. 4 model number, and the aluminum series has no. 10 model number.
· Stocking stainless steel series from ø4 to ø28, aluminum series from ø3 to ø40 in millimeter and inch system of inner diameter finish.- CAD ：
- 2D
Standard Price: MYR 224.14 Days to Ship: 6 Day(s) or more -
NIHON MINIATURE
Low cost coupling that uses zinc die casting for the hub part (boss part), and urethane rubber for the sleeve.
[Features]
· MF coupling consists of one rubber sleeve and two hubs made of zinc die-cast (surface treated).
· Sleeves and hubs have splines on inner and outer diameters, respectively, which engage and transmit torque.
· Fastening to shaft is by set screw.- CAD ：
- 2D
Standard Price: MYR 78.05- Days to Ship: 4 Day(s) or more -
Chemifit C1 Speed Controller Inline Type ESU-C1SG
NITTA
[Features]
· Suitable for environments (atmospheres) that require chemical resistance.
· Special polypropylene resin and SUS304 are used as the main materials.
· Special EPDM is used for the main sealing material.
· The tube is connected by Push One®.
· No need for jigs or tools to connect tubes.
· Allows centralized control with in-line (ESU) piping lines.
· Fix the connecting pins and sockets for a wide variety of piping.- CAD ：
- 2D
Standard Price: MYR 405.90 Days to Ship: 7 Day(s) or more
Loading...
Configure
Category
-
- Knob Screws (402)
- Flexible Shaft Couplings (222)
- Sprockets (196)
- Timing Pulleys, Idlers (166)
- Speed Controllers (149)
- Bearings with Housings (126)
- Casters (107)
- Roller Bearings (58)
- Bearings with Resin (54)
- Linear Bushings (48)
- Screw Fittings, Screw-In Type Flanges (39)
- Single Axis Robots (37)
- Ball Bearings (34)
- Vertical Hold-Down Toggle Clamps (33)
- Nuts (32)
- Flying Cam Units (29)
- Horizontal Hold-Down Toggle Clamps (28)
- Handles (27)
- Push-Pull Toggle Clamps (26)
- Standard Linear Guides (25)
- Belt Conveyors, Plastic Chain Conveyors (25)
- Linear Shafts (24)
- Foot Bases for Aluminum Extrusions (24)
- Timing Belt (22)
- Flat Hinges (21)
- Shaft Supports (19)
- Heat Insulating Plates (18)
- Telescopic Slide Rails (18)
- Adjuster Bolt (17)
- Single Axis Linear Motor Actuators (16)
- Oil Free Bushings (15)
- Contact Probes (15)
- Small AC Motors (15)
- 6 Series - Aluminum Frames 30, 50, 60, 100 Square (15)
- Bracket for 8mm Slot (30/40/50/60/80/100) Economy series Aluminum frame (15)
- Panel Mounts (15)
- Flat Type (15)
- Roller Chains (14)
- Angle Plates (14)
- Ball Screw (13)
- Standard Sheath Type (13)
- Support Units (12)
- Locating Pins (12)
- Cam Followers, Roller Followers (12)
- Stepping Motors (12)
- Heat Shrink Tubes (11)
- Indexing Plungers (11)
- Bushings for Fixtures (10)
- Posts (10)
- Catches (10)
- Cable Carriers (9)
- Lead Screw Clamps (9)
- Proximity Sensors (9)
- X-Axis (9)
- Brushless Motors (9)
- LED (9)
- Shaft Collars (8)
- Ball Plungers (8)
- Photoelectric Sensors (8)
- Rack Gears (8)
- Tension Springs (8)
- Post Stands (8)
- Lead Screws, Nuts (7)
- Rod Type Actuator (7)
- Fiber Sensors (Amplifiers) (7)
- Spur Gears (7)
- Ball Rollers (7)
- 5 Series - Aluminum Frames 20, 25, 40 Square (7)
- Aluminum Frames 4545,4590 (7)
- Digital Position Indicators (6)
- Stopper Bolts (6)
- Bearing Lock Nuts (6)
- Flat Belt Pulleys, Idlers (6)
- Rollers (6)
- Compression Springs (6)
- Round Wire Springs (6)
- Antivibration Materials (6)
- Machine Keys (6)
- Ball Valves (6)
- O-Rings (6)
- Sensor Rails, DIN Rails (5)
- Cartridge Heaters (5)
- Cantilever Shafts (5)
- AC Servo Motor (5)
- Keyless Bushing (Fastening Fittings) (5)
- Material Plates, Blocks (5)
- Tabbed Bracket for Economy series Aluminum frame (5)
- Slot Covers (5)
- Concealed(invisible) joint parts/frame with joints (5)
- Double Post Type (5)
- Rotation Handles, Crank Handles (5)
- Metal Washers, Collars (5)
- Hose Fittings (5)
- Hinge Pins (5)
- Ball-Lock Punches (5)
- Machinery Robot Cables (4)
- USB Adapters (4)
- LAN Adapters (4)
- Nuts for Lead Screws (4)
- Lead Screw Support Units (4)
- Linear Actuator (Steel body) (4)
- Spring Plungers (4)
- Rotary (4)
- Flat Belt (4)
- Flat Belt Pulleys (4)
- Conveyer Timing Belts (4)
- Frame Caps (4)
- Clamps, Holders, Hooks (4)
- Rod End Bearings, Spherical Bearings (4)
- Hex Screws (4)
- Hex Socket Head Cap Screws (4)
- Hex Socket Set Screws (4)
- Button Dies (4)
- LAN / Reduced Wiring Network Cable (3)
- Roller Plungers (3)
- Laser Sensor (3)
- Fiber Units (3)
- Photomicrosensors (3)
- Z-Axis (3)
- Goniometer (3)
- Manual XY-Axis Stages (3)
- Rotary (3)
- Round Belt Pulleys, Idlers (3)
- Pipe Rollers (3)
- Trims Edge (3)
- Urethane, Rubber, Sponge, Felt - Round Shape (3)
- Bolts (3)
- Adjuster Pads (3)
- Single Post Type (3)
- Retaining Rings (3)
- Fittings for Stainless Steel Pipes (3)
- Manifold Blocks (3)
- Space Saving Bolts (3)
- Screws with Captured Washer (3)
- Hex Socket Flat Head Cap Screws (3)
- Hex Nuts (3)
- Scrap Retention Button Dies (3)
- Urethane Springs (3)
- Electrode Wires (3)
- Belt Polishing Materials (3)
- Wheels with Shafts (3)
- Industrial Relays (2)
- Stack Lights (2)
- Hubs (2)
- Sensor Cables (2)
- Power Cables (2)
- Electrical Enclosure Cooling Fans (2)
- Noise Filters (2)
- Linear Guide Accessories (2)
- Cross Roller Tables (2)
- Ball Lock Pins, Slot Pins (2)
- Adjustment Screws (2)
- Adjusting Bolts (2)
- Clamping Screws (2)
- Manual X-Axis Stages (2)
- Z-Axis (2)
- XZ-Axis (2)
- Manual XYZ-Axis Stages (2)
- Goniometer (2)
- Temperature Controllers (2)
- Round Belts (2)
- Flat Belt Idlers (2)
- Posts for Tension Springs (2)
- Fixed Type (2)
- Adjustable (2)
- Ionizer (2)
- L-Shaped Angles (2)
- End Face Connectors (2)
- Casters (2)
- Handle (2)
- Hinges (2)
- Floating Joints (2)
- Hose Clamps (2)
- Pan Head Screws (2)
- Flat Head Machine Screws (2)
- Small Truss Screws (2)
- Hex Socket Button Head Cap Screws (2)
- Self Tapping Screws, Taptite High Tech Screws (2)
- Washers (2)
- Threaded Inserts (2)
- Pilot Punches With Locating Dowel Holes (2)
- Nest Guides (2)
- Radius End Mills (Carbide) (2)
- Grinding Stone Dressers (2)
- Sheet Polishing Materials (2)
- Relay Sockets (1)
- I/O Harnesses for Control Signals (1)
- Zip Tie Fixtures/Options (1)
- Aluminum/Plastic Boxes (with Hole Drilling Alternations) (1)
- Fans (Options, Others) (1)
- PC Power Supplies (1)
- Interface Terminal Blocks (Round/Y Terminal Types) (1)
- Interface Terminal Blocks (Rod Terminal Type) (1)
- Angled Pins (1)
- Spline Shaft (1)
- Cross Roller Guides (1)
- Simplified Slide Rails (1)
- Bushings for Inspection Jigs (1)
- Leveling Screws (1)
- Locating Units (1)
- Lens for Sensor (for Photoelectric Sensors and Fiber Sensors) (1)
- Peripheral Components (for Photomicrosensors) (1)
- XY-Axis (1)
- Micrometer Heads, Feed Screw (1)
- X-Axis (1)
- Bearing Shaft Screws (1)
- Gear Motors (1)
- Other Motor Related Components (1)
- Magnetic Transmission (1)
- Torsion Springs (1)
- Disc Springs (1)
- Other Shock Absorbers (1)
- Antivibration Mounts (1)
- Transparent Plastic Plates, Plastic Cover Panels (1)
- Aluminum Frames (1)
- 90 degree Brackets (1)
- Hinges (1)
- Catches and Locks (1)
- Door Sliders (1)
- Others (1)
- Door Slider (1)
- Safety Mesh Fence Units (1)
- Gussets (1)
- Leveling Mount Related Components (1)
- Shim Tapes (1)
- Shim Rings (1)
- Other Manifolds (1)
- Ducts Hose Fittings (1)
- Links (1)
- Hinge Bases, Hinge Plates, Hinge Bolt (1)
- Wing Hinge Screws (1)
- Cover Screws (1)
- Lock Nuts (1)
- Domed (Acorn) Nuts (1)
- Screw Plugs (1)
- Anchors (1)
- Hydraulic Hose Adaptors (1)
- Air Nozzles (1)
- Ball-Lock Button Dies (1)
- Pre-Holding Pins (1)
- Limit Unit (1)
- Square End Mills (Carbide) (1)
- Multi-Function Square End Mills (Carbide) (1)
- Round Bar Electrodes (1)
- Grinding Stones with Shafts (1)
- DIA/CBN Bars (1)
- Polishing Materials / Pastes (1)
- Hook (1)
Lead Time / Manufacturer / CAD Data Type
-
Days to Ship
- All
- 1 Day(s) or Less
- 2 Day(s) or Less
- 3 Day(s) or Less
- 4 Day(s) or Less
- 5 Day(s) or Less
- 6 Day(s) or Less
- 7 Day(s) or Less
- 8 Day(s) or Less
- 9 Day(s) or Less
- 10 Day(s) or Less
-
Brand
- MISUMI (1952)
- KATAYAMA CHAIN (163)
- KONISHI (90)
- NABEYA BI-TECH (87)
- IMAO (72)
- SMC (58)
- ESCO (48)
- DAIMARU_BYORA (30)
- MITSUBOSHI_BELT (28)
- SUNGIL (27)
- PISCO (19)
- LINK (18)
- MITSUBOSHI CI (18)
- CHIYODA (17)
- NTN (17)
- TOK BEARING (16)
- CKD (14)
- KOGANEI (14)
- SANKOSEISAKUSHO (13)
- FESTO (13)
- MIKI PULLEY (12)
- ADVANCED (11)
- YUKIGIKEN (11)
- SAKAI (10)
- TAKIGEN (10)
- UNITTA (10)
- IKO (9)
- INA (9)
- SCHCOUPLING (9)
- JTEKT KOYO (8)
- NIHON MINIATURE (8)
- KAYSEVEN (7)
- TRUSCO NAKAYAMA (7)
- EASTERN SEIKO (6)
- NSK (6)
- GOSHO WORKS (5)
- MIGHTY (5)
- NITTA (5)
- THREE HIGH (5)
- NIC AUTOTEC (4)
- OMRON (4)
- MIYOSHI KIKAI (3)
- OZAK (3)
- RICHENGINEERING (3)
- ISEL (2)
- KONOE (2)
- NACHI (2)
- ORIENTAL MOTOR (2)
- YAMATO_CO_LTD (2)
- CAP (1)
- HILOGIK (1)
- JPF (1)
- KOYO ELECTRONIC (1)
- KYOUIKU (1)
- LYNXEYEMOTION (1)
- MINITOR (1)
- NIHON SEIKI (1)
- NITOMS (1)
- SUNCO (1)
- TAIYO (1)
- NSB (1)
- YAHATA (1)
- SHIMIZU (1)
-
CAD
- 2D
- 3D
Loading...
Full Text Search
Loading...
Technical Information
Loading...
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy