(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Search Results “Misumi Economy”
Brand
Category
2 items
Loading...
Product
-
Small Caster Light Load Swivel Type with/without Stopper
MISUMI
This is an economy item, The price is cheaper than the MISUMI standard product.
- Volume Discount
Standard Price: MYR 4.18- Days to Ship: 6 Day(s) -
Shaft Supports Thickened Type, T-Shaped with Slit
MISUMI
This is an economy item, The price is cheaper than the MISUMI standard product.
- Volume Discount
- CAD ：
- 3D
Standard Price: MYR 64.10- Days to Ship: 6 Day(s) -
Slide Rails Three Step Slide Light load Type(Width:27mm, Steel)
MISUMI
- Slide Rails Three Step Slide Light Load Type (Width:27mm, Steel), C-SRXY27 series from MISUMI.
- This is an economy item; The price is cheaper than the MISUMI standard product.
- The overall length of the slide rail can be selected up to 500 mm.
- The travel length of slide rail can be selected up to 524 mm.
- Rated load of slide rail can be selected up to 336 N (When using two pieces).- Volume Discount
- RoHS
- CAD ：
- 3D
Standard Price: MYR 38.53- Days to Ship: 1 Day(s) -
Fiber Sensor, Screw Mounting Type
MISUMI
This is an economy item, The price is cheaper than the MISUMI standard product.
- Volume Discount
- CAD ：
- 3D
Standard Price: MYR 26.56- Days to Ship: 1 Day(s) or more -
MISUMI
This is an economy item, The price is cheaper than the MISUMI standard product.
- Volume Discount
- CAD ：
- 3D
Standard Price: MYR 186.53 Days to Ship: 6 Day(s) -
Casting Handles Stainless Steel
MISUMI
Casting Handles Stainless Steel
These stainless handles are designed for convenient opening and closing the doors, This is an economy item, The price is cheaper than the MISUMI standard product.They offer a wide variety of sizes to choose from.
[Feature]
- Mounting Pitch (mm.) : 80, 100, 150 and 200
- Overall Height (mm.) : 32 and 46
- Mounting Method : Round Hole
- Material : SUS304
- Surface Treatment : Buff Polished
[Application]
It is used to grab the doors before opening and closing.- Volume Discount
- RoHS
- CAD ：
- 3D
Standard Price: MYR 42.17- Days to Ship: 1 Day(s) -
Linear Motor Actuator 17 Series Standard Type
MISUMI
- Economy Series Linear Motor Actuator with High Precision and Speed. You can choose appropriate part no. of the actuator by using selection software.
【1 minute Quick Selection Software】 ・Selection Software ver2.2- Volume Discount
- CE-Compliant
- RoHS
Standard Price: MYR 4,205.75- Days to Ship: 13 Day(s) or more -
Temperature Sensors Screw Mount PT100 Type
MISUMI
Temperature Sensors Screw Mount PT100 Type
These Temperature Sensors type PT100 are an economy item, The price is cheaper than the MISUMI standard product.They offer a wide variety of sizes to choose from.
[Feature]
● Temperature Sensors : Platinum Resistance Thermometers Type PT100
● Screw Size: M6 X 1.0
● Wire Length (m.): 1, 2, and 5
● Temperature Range (°C) : 0-150
● Crimp Terminal Type: Y-Shaped 3 sets
[Application]
It is used in a variety of application such as heat treatment, packaging industry , plastic industry , and so on.- Volume Discount
- CAD ：
- 3D
Standard Price: MYR 41.50- Days to Ship: 1 Day(s) -
Phenolic Plastic Handle With Tapped
MISUMI
Phenolic Plastic Handle With Tapped
These handles are designed for convenient opening and closing the doors , This is an economy item, The price is cheaper than the MISUMI standard product.They offer a wide variety of sizes to choose from.
[Feature]
- Mounting Pitch (mm.) : 90, 120, 160 and 180
- Overall Height (mm.) : 45, 50 and 56
- Mounting Method : Outside mount
- Material : Phenol
- Surface Treatment : Buff Polished
[Application]
It is used to grab the doors before opening and closing.- Volume Discount
- CAD ：
- 3D
Standard Price: MYR 16.37- Days to Ship: 1 Day(s) -
Rolled Ball Screws Shaft Dia.10 Lead 2/4 Accuracy Grade C7
MISUMI
- Rolled Ball Screws Shaft Dia.10 Lead 2/4 Accuracy Grade C7 from MISUMI.
- The Rolled Ball Screws have a shaft diameter of 10 mm and are available in two different lead sizes: 2mm or 4mm.
- The accuracy grade option for this product is C7.
- The overall length of the shaft screw can be customized to fit a range of configurations, from 150mm to 600mm, in 1mm increments.
- The lead twisting direction for this product is right-handed.
- The screw shaft is made of S55C while the nut is made of SCM420.- RoHS
Days to Ship: 10 Day(s) -
Standard Price: MYR 40.63- Days to Ship: 1 Day(s) or more -
Standard Price: MYR 19.34- Days to Ship: 1 Day(s) -
Standard Price: MYR 35.30- Days to Ship: 1 Day(s) or more -
Standard Price: MYR 16.10 Days to Ship: 1 Day(s) -
Economy Pulleys for Flat Belts-Crowned Type/Crosspiece Groove Straight Type/Width L110-510
MISUMI
· Product type : Pulleys.
· Shaft of Pulleys : Crowned and Crosspiece Groove Straight type.
· The series code of Crowned type: RBWAC and RBWWC.
· The series code of Crosspiece Groove type: RBWAM and RBWWM.
· Shaft Type : Round Hole.
· Pulleys Body Material: Aluminum Alloy.
· Press Fit Bushing Material: Aluminum Alloy.
· Surface Treatment solution: Clear Anodize (For only RBWWC and RBWWM type)
· Outer Diameter: 18-78 mm.
· Shaft (Bore) Diameter: 8-50 mm.
· Length: 110-510 mm.
· Economy Idlers for Flat Belts-Straight Type/ Crosspiece Groove Straight Type/ Crowned Type.Days to Ship: 7 Day(s) or more -
Standard Price: MYR 14.02- Days to Ship: 5 Day(s) -
Bushings for Locating Pins - Oval - Shouldered (Dowel Pin)
MISUMI
A oval bushing.
[Features]
· Economy type is priced up to 74% lower than Standard Type.Days to Ship: 9 Day(s) -
Handle Polishing and oxidation
MISUMI
[Characteristics]
・ High cost-effective handle- Volume Discount
- CAD ：
- 3D
Standard Price: MYR 44.86- Days to Ship: 1 Day(s) -
Standard Price: MYR 20.86- Days to Ship: 1 Day(s) -
Disc Couplings - High Torque, Clamping
MISUMI
"Couplings with carbon fiber discs have higher torque ratings than the polyimide discs, and are more lateral/angular misalignment tolerant than stainless steel."
Days to Ship: 6 Day(s) or more -
MISUMI
[Material]
· Pulley: Extra super duralumin aluminum alloy, S45C equivalent, SUS304
· Flange: Aluminum alloy, SPCC
[Surface treatment]
· Clear anodize, black anodize, hard clear anodize (firm hardness 300HV~), electroless nickel plating, black iron oxide coatingDays to Ship: 7 Day(s) or more -
MISUMI
[Material]
· Pulley: Extra super duralumin aluminum alloy
· Flange: Aluminum alloy
· Bushing: S45C equivalent
[Surface treatment]
· Clear anodize, hard clear anodize (firm hardness 300HV~)Days to Ship: 7 Day(s) or more -
Days to Ship: 4 Day(s) or more -
Bearings with Housings - T-Shaped, High Configurable
MISUMI
Bearings with Housings - T-Shaped, High Configurable
Bearings with housings are commonly used in various industrial applications and providing a mounting structure.They offer a wide variety of sizes to choose from.
[Feature]
● Bearing Inner Diameter Minimum/Maximum (mm.): 3 and 40
● Shape : T-Shaped
● Seal : DD (Contact Rubber Seal), VV (Non-Contact Rubber Seal) and ZZ (Double Shield)
● Material :
Bearing - Steel or Stainless Steel
Housing - S45C Equivalent , 2000 Series Aluminum Alloy and SUS304 Equivalent
[Application]
Bearings with housings are commonly used in automation machines system- Volume Discount
Days to Ship: 6 Day(s) or more -
Standard Price: MYR 1.46- Days to Ship: 1 Day(s) or more -
Standard Price: MYR 2.55 Days to Ship: 1 Day(s) -
Standard 2082 Double Pitch Sprocket, R Roller B Type
KATAYAMA CHAIN
Rich lineup of variations in KANA standard sprocket count, number of teeth, and shape. The shaft holes of this product are not yet machined, so machining of shaft holes is required when using.
- CAD ：
- 3D
Standard Price: MYR 313.29- Days to Ship: 7 Day(s) or more -
NSK
Cylindrical roller bearings are suitable for applications involving high-speed rotation because the friction between the rolling elements and the flange of the track wheel is small. Products on this page: N type
- CAD ：
- 3D
Standard Price: MYR 89.28- Days to Ship: 4 Day(s) or more -
XGT/XGL/XGS Flexible Coupling - High-Damping Capacity Rubber Type
NABEYA BI-TECH
Vibration absorption, high torque, high responsiveness, backlash "0"
[Features]
· Rubber type optimally designed for actuator flexible coupling, with high damping capacity.
· High precision positioning in a short time is possible.
· Completely unified structure, coupling molded hubs on both sides with high damping capacity rubber.
· High damping capacity shape of the rubber is designed by analysis, using the latest finite element method to achieve high torsional rigidity, and high torque.
· In addition, by concentrating the stress near the inner diameter of the clasp uniformly throughout, a long-life design is achieved.- CAD ：
- 3D
Standard Price: MYR 141.94- Days to Ship: 5 Day(s) or more -
OLDHAM Type Coupling (SOH Series)
SUNGIL
[Features]
・Electrical insulation effect, non-magnetic
・Absorption of excellent eccentricity and declination (slip phenomenon of middle disc and rounding effect of hub)
・Easy to assemble and replace
・ Minimization of axial load during unalignment
・Free flow, low bearing load
•Related Keywords: Sungil Machinery, Standard Coupling, Coupling / Shaft JointStandard Price: MYR 61.60- Days to Ship: 4 Day(s) or more
Loading...
Configure
Category
-
- Knob Screws (402)
- Flexible Shaft Couplings (223)
- Sprockets (196)
- Timing Pulleys, Idlers (168)
- Speed Controllers (149)
- Bearings with Housings (126)
- Casters (107)
- Roller Bearings (58)
- Bearings with Resin (54)
- Linear Bushings (48)
- Screw Fittings, Screw-In Type Flanges (39)
- Single Axis Robots (37)
- Ball Bearings (34)
- Vertical Hold-Down Toggle Clamps (33)
- Nuts (32)
- Flying Cam Units (29)
- Horizontal Hold-Down Toggle Clamps (28)
- Handles (27)
- Push-Pull Toggle Clamps (26)
- Standard Linear Guides (25)
- Belt Conveyors, Plastic Chain Conveyors (25)
- Linear Shafts (24)
- Foot Bases for Aluminum Extrusions (24)
- Timing Belt (22)
- Flat Hinges (21)
- Shaft Supports (19)
- Heat Insulating Plates (18)
- Telescopic Slide Rails (18)
- Adjuster Bolt (17)
- Single Axis Linear Motor Actuators (16)
- Oil Free Bushings (15)
- Contact Probes (15)
- 6 Series - Aluminum Frames 30, 50, 60, 100 Square (15)
- Bracket for 8mm Slot (30/40/50/60/80/100) Economy series Aluminum frame (15)
- Panel Mounts (15)
- Flat Type (15)
- Roller Chains (14)
- Angle Plates (14)
- Ball Screw (13)
- Standard Sheath Type (13)
- Support Units (12)
- Locating Pins (12)
- Cam Followers, Roller Followers (12)
- Stepping Motors (12)
- Heat Shrink Tubes (11)
- Indexing Plungers (11)
- Small AC Motors (11)
- Bushings for Fixtures (10)
- Posts (10)
- Catches (10)
- Cable Carriers (9)
- Lead Screw Clamps (9)
- Proximity Sensors (9)
- X-Axis (9)
- LED (9)
- Shaft Collars (8)
- Ball Plungers (8)
- Photoelectric Sensors (8)
- Rack Gears (8)
- Tension Springs (8)
- Post Stands (8)
- Lead Screws, Nuts (7)
- Rod Type Actuator (7)
- Fiber Sensors (Amplifiers) (7)
- Spur Gears (7)
- Ball Rollers (7)
- 5 Series - Aluminum Frames 20, 25, 40 Square (7)
- Aluminum Frames 4545,4590 (7)
- Digital Position Indicators (6)
- Stopper Bolts (6)
- Bearing Lock Nuts (6)
- Flat Belt Pulleys, Idlers (6)
- Rollers (6)
- Compression Springs (6)
- Round Wire Springs (6)
- Antivibration Materials (6)
- Machine Keys (6)
- Ball Valves (6)
- O-Rings (6)
- Sensor Rails, DIN Rails (5)
- Cartridge Heaters (5)
- Cantilever Shafts (5)
- AC Servo Motor (5)
- Keyless Bushing (Fastening Fittings) (5)
- Material Plates, Blocks (5)
- Tabbed Bracket for Economy series Aluminum frame (5)
- Slot Covers (5)
- Concealed(invisible) joint parts/frame with joints (5)
- Double Post Type (5)
- Rotation Handles, Crank Handles (5)
- Metal Washers, Collars (5)
- Hose Fittings (5)
- Hinge Pins (5)
- Ball-Lock Punches (5)
- Machinery Robot Cables (4)
- USB Adapters (4)
- LAN Adapters (4)
- Nuts for Lead Screws (4)
- Lead Screw Support Units (4)
- Linear Actuator (Steel body) (4)
- Spring Plungers (4)
- Rotary (4)
- Flat Belt (4)
- Flat Belt Pulleys (4)
- Conveyer Timing Belts (4)
- Frame Caps (4)
- Clamps, Holders, Hooks (4)
- Rod End Bearings, Spherical Bearings (4)
- Hex Screws (4)
- Hex Socket Head Cap Screws (4)
- Hex Socket Set Screws (4)
- Button Dies (4)
- LAN / Reduced Wiring Network Cable (3)
- Roller Plungers (3)
- Laser Sensor (3)
- Fiber Units (3)
- Photomicrosensors (3)
- Z-Axis (3)
- Goniometer (3)
- Manual XY-Axis Stages (3)
- Rotary (3)
- Round Belt Pulleys, Idlers (3)
- Pipe Rollers (3)
- Trims Edge (3)
- Urethane, Rubber, Sponge, Felt - Round Shape (3)
- Bolts (3)
- Adjuster Pads (3)
- Single Post Type (3)
- Retaining Rings (3)
- Fittings for Stainless Steel Pipes (3)
- Manifold Blocks (3)
- Space Saving Bolts (3)
- Screws with Captured Washer (3)
- Hex Socket Flat Head Cap Screws (3)
- Hex Nuts (3)
- Scrap Retention Button Dies (3)
- Urethane Springs (3)
- Electrode Wires (3)
- Belt Polishing Materials (3)
- Wheels with Shafts (3)
- Industrial Relays (2)
- Stack Lights (2)
- Hubs (2)
- Sensor Cables (2)
- Power Cables (2)
- Electrical Enclosure Cooling Fans (2)
- Noise Filters (2)
- Linear Guide Accessories (2)
- Cross Roller Tables (2)
- Ball Lock Pins, Slot Pins (2)
- Adjustment Screws (2)
- Adjusting Bolts (2)
- Clamping Screws (2)
- Manual X-Axis Stages (2)
- Z-Axis (2)
- XZ-Axis (2)
- Manual XYZ-Axis Stages (2)
- Goniometer (2)
- Temperature Controllers (2)
- Round Belts (2)
- Flat Belt Idlers (2)
- Posts for Tension Springs (2)
- Fixed Type (2)
- Adjustable (2)
- Ionizer (2)
- L-Shaped Angles (2)
- End Face Connectors (2)
- Casters (2)
- Handle (2)
- Hinges (2)
- Floating Joints (2)
- Hose Clamps (2)
- Pan Head Screws (2)
- Flat Head Machine Screws (2)
- Small Truss Screws (2)
- Hex Socket Button Head Cap Screws (2)
- Self Tapping Screws, Taptite High Tech Screws (2)
- Washers (2)
- Threaded Inserts (2)
- Pilot Punches With Locating Dowel Holes (2)
- Nest Guides (2)
- Radius End Mills (Carbide) (2)
- Grinding Stone Dressers (2)
- Sheet Polishing Materials (2)
- Relay Sockets (1)
- I/O Harnesses for Control Signals (1)
- Zip Tie Fixtures/Options (1)
- Aluminum/Plastic Boxes (with Hole Drilling Alternations) (1)
- Fans (Options, Others) (1)
- PC Power Supplies (1)
- Interface Terminal Blocks (Round/Y Terminal Types) (1)
- Interface Terminal Blocks (Rod Terminal Type) (1)
- Angled Pins (1)
- Spline Shaft (1)
- Cross Roller Guides (1)
- Simplified Slide Rails (1)
- Bushings for Inspection Jigs (1)
- Leveling Screws (1)
- Locating Units (1)
- Lens for Sensor (for Photoelectric Sensors and Fiber Sensors) (1)
- Peripheral Components (for Photomicrosensors) (1)
- XY-Axis (1)
- Micrometer Heads, Feed Screw (1)
- X-Axis (1)
- Bearing Shaft Screws (1)
- Gear Motors (1)
- Other Motor Related Components (1)
- Magnetic Transmission (1)
- Torsion Springs (1)
- Disc Springs (1)
- Other Shock Absorbers (1)
- Antivibration Mounts (1)
- Transparent Plastic Plates, Plastic Cover Panels (1)
- Aluminum Frames (1)
- 90 degree Brackets (1)
- Hinges (1)
- Catches and Locks (1)
- Door Sliders (1)
- Others (1)
- Door Slider (1)
- Safety Mesh Fence Units (1)
- Gussets (1)
- Leveling Mount Related Components (1)
- Shim Tapes (1)
- Shim Rings (1)
- Other Manifolds (1)
- Ducts Hose Fittings (1)
- Links (1)
- Hinge Bases, Hinge Plates, Hinge Bolt (1)
- Wing Hinge Screws (1)
- Cover Screws (1)
- Lock Nuts (1)
- Domed (Acorn) Nuts (1)
- Screw Plugs (1)
- Anchors (1)
- Hydraulic Hose Adaptors (1)
- Air Nozzles (1)
- Ball-Lock Button Dies (1)
- Pre-Holding Pins (1)
- Limit Unit (1)
- Square End Mills (Carbide) (1)
- Multi-Function Square End Mills (Carbide) (1)
- Round Bar Electrodes (1)
- Grinding Stones with Shafts (1)
- DIA/CBN Bars (1)
- Polishing Materials / Pastes (1)
- Hook (1)
Lead Time / Manufacturer / CAD Data Type
-
Days to Ship
- All
- 1 Day(s) or Less
- 2 Day(s) or Less
- 3 Day(s) or Less
- 4 Day(s) or Less
- 5 Day(s) or Less
- 6 Day(s) or Less
- 7 Day(s) or Less
- 8 Day(s) or Less
- 9 Day(s) or Less
- 10 Day(s) or Less
-
Brand
- MISUMI (1939)
- KATAYAMA CHAIN (163)
- KONISHI (90)
- NABEYA BI-TECH (87)
- IMAO (72)
- SMC (58)
- ESCO (48)
- DAIMARU_BYORA (30)
- MITSUBOSHI_BELT (28)
- SUNGIL (27)
- PISCO (19)
- LINK (18)
- MITSUBOSHI CI (18)
- CHIYODA (17)
- NTN (17)
- TOK BEARING (16)
- CKD (14)
- KOGANEI (14)
- SANKOSEISAKUSHO (13)
- FESTO (13)
- MIKI PULLEY (12)
- UNITTA (12)
- ADVANCED (11)
- SAKAI (11)
- YUKIGIKEN (11)
- TAKIGEN (10)
- IKO (9)
- INA (9)
- SCHCOUPLING (9)
- JTEKT KOYO (8)
- NIHON MINIATURE (8)
- KAYSEVEN (7)
- TRUSCO NAKAYAMA (7)
- EASTERN SEIKO (6)
- NSK (6)
- GOSHO WORKS (5)
- MIGHTY (5)
- NITTA (5)
- THREE HIGH (5)
- NIC AUTOTEC (4)
- OMRON (4)
- MIYOSHI KIKAI (3)
- OZAK (3)
- RICHENGINEERING (3)
- ISEL (2)
- KONOE (2)
- NACHI (2)
- ORIENTAL MOTOR (2)
- YAMATO_CO_LTD (2)
- CAP (1)
- HILOGIK (1)
- JPF (1)
- KOYO ELECTRONIC (1)
- KYOUIKU (1)
- LYNXEYEMOTION (1)
- MINITOR (1)
- NIHON SEIKI (1)
- NITOMS (1)
- SUNCO (1)
- TAIYO (1)
- NSB (1)
- YAHATA (1)
- SHIMIZU (1)
-
CAD
- 2D
- 3D
Loading...
Full Text Search
Loading...
Technical Information
Loading...
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy