(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Ejector Sleeves（Shaft diameter tolerance：0/-0.005）
| Days to Ship |
|
|---|
-
MISUMI
This is a stepped ejector sleeve that is different from the straight type. The wall thickness at the tip can be set to a minimum of 0.3mm, making it thinner than regular products. In addition, the coaxiality is 0.005, making it a more accurate product than usual.
Days to Ship: 8 Day(s) -
Precision Stepped Ejector Sleeves -SKH51/0.6mm Wall Type-
MISUMI
This is a stepped ejector sleeve that is different from the straight type. The tip wall thickness can be set to a minimum of 0.6mm, and the brim thickness can be selected from 4mm, 6mm/8mm (JIS standard).
Days to Ship: 6 Day(s) or more
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| D (Shaft diameter)(mm) |
| P (Tip diameter)(mm) |
| Material |
| V (Hole diameter)(mm) |
| Head thickness |
| Product composition |
| Surface treatment |
| Concentricity |
| Boring method |
| Inner dia. tolerance |
| Shaft diameter tolerance |
| Tapered or not |
|
| |
| Brand | MISUMI | MISUMI |
| Product Series | ||
| CAD |
|
|
| Days to Ship | 8 Day(s) | 6 Day(s) or more |
| D (Shaft diameter)(mm) | 2.5 ～ 6 | 3.5 ～ 13 |
| P (Tip diameter)(mm) | 1.8 ～ 5.95 | 3.2 ～ 12.9 |
| Material | SKH51 | SKH51 |
| V (Hole diameter)(mm) | 0.8 ～ 5.1 | 0.8 ～ 11.7 |
| Head thickness | 4mm(T4) | 4mm(T4) / 6mm(JIS) / 8mm(JIS) |
| Product composition | Single sleeve | Single sleeve |
| Surface treatment | No | No |
| Concentricity | ◎0.005 | ◎0.005 |
| Boring method | Grinding | Grinding |
| Inner dia. tolerance | +0.005/0 | +0.005/0 |
| Shaft diameter tolerance | 0/-0.005 | 0/-0.005 |
| Tapered or not | No | No |
Loading...
Configure
Specification/Dimensions
-
D (Shaft diameter)(mm)
-
P (Tip diameter)(mm)
-
Material
- SKH51
- SKD61
-
V (Hole diameter)(mm)
-
Head thickness
- 4mm(T4)
- 6mm(JIS)
- 8mm(JIS)
-
Product composition
- Single sleeve
-
Surface treatment
- No
- Nitrided
-
Concentricity
- ◎0.005
- ◎0.01
- ◎0.03
- ◎0.06
-
Boring method
- Grinding
- Wire cutting & polishing
- Reaming
-
Inner dia. tolerance
-
Shaft diameter tolerance
- 0/-0.005
- -0.01/-0.02
-
Tapered or not
- No
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
Related Categories to Ejector Sleeves
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy