(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Ejector Sleeves（Inner dia. tolerance：+0.01/0）
| Days to Ship |
|
|---|
-
Precision Straight Ejector Sleeves -SKH51/0.6mm Wall-
MISUMI
If your product inquiries are out of catalogue, we can support by drawing (Made to order). Please contact PM_BD@misumi.co.th
Days to Ship: 6 Day(s) or more -
Short Ejector Sleeves (Bushings for straight ejector pins)
MISUMI
This is an ejector sleeve whose total length (L dimension) can be set to a minimum of 15mm. The wall thickness at the tip can be set to a minimum of 0.6mm, and the length from the sliding part to the relief hole is tapered.
Days to Ship: 6 Day(s) or more -
Precision Straight Ejector Sleeves -SKH51/Concentricity0.01/0.6mm Wall/S Dimension Long Type-
MISUMI
This is an ejector sleeve whose tip wall thickness can be set to a minimum of 0.6mm. Compared to regular products, this product allows you to select the length of the inner sliding part (S dimension) up to 50mm.
Days to Ship: 6 Day(s)
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| D/P (Shaft diameter)(mm) |
| V (Hole diameter)(mm) |
| Material |
| Head thickness |
| Product composition |
| Concentricity between the hole and shaft diameters |
| Shaft diameter tolerance |
| Inner dia. tolerance |
| Surface treatment |
| Boring method |
| Tapered or not |
| Center pin tip shape |
| P (Tip diameter)(mm) |
|
|
| |
| Brand | MISUMI | MISUMI | MISUMI |
| Product Series | Precision Straight Ejector Sleeves -SKH51/Concentricity0.01/0.6mm Wall/S Dimension Long Type- | ||
| CAD |
|
|
|
| Days to Ship | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) |
| D/P (Shaft diameter)(mm) | 3.2 ～ 14 | 2.5 ～ 8 | 3.2 ～ 14 |
| V (Hole diameter)(mm) | 0.8 ～ 12.2 | 1 ～ 6.8 | 0.8 ～ 12.2 |
| Material | SKH51 | SKH51 | SKH51 |
| Head thickness | 4mm(T4) | 4mm(T4) | 4mm(T4) / 6mm(JIS) / 8mm(JIS) |
| Product composition | Single sleeve | Single sleeve | Single sleeve |
| Concentricity between the hole and shaft diameters | ◎0.005 / ◎0.01 | ◎0.01 | ◎0.01 |
| Shaft diameter tolerance | 0/-0.005 / -0.01/-0.02 | 0/-0.005 / -0.01/-0.02 | 0/-0.005 / -0.01/-0.02 |
| Inner dia. tolerance | +0.01/0 | +0.01/0 | +0.01/0 |
| Surface treatment | No | No | No |
| Boring method | Grinding | - | Wire cutting & polishing |
| Tapered or not | No | Yes | No |
| Center pin tip shape | No | No | No |
| P (Tip diameter)(mm) | - | - | - |
Loading...
Configure
Specification/Dimensions
-
D/P (Shaft diameter)(mm)
-
V (Hole diameter)(mm)
-
Material
- SKH51
- SKD61
-
Head thickness
- 4mm(T4)
- 6mm(JIS)
- 8mm(JIS)
-
Product composition
- Single sleeve
-
Concentricity between the hole and shaft diameters
-
Shaft diameter tolerance
- 0/-0.005
- -0.01/-0.02
- -0.01/-0.03
-
Inner dia. tolerance
-
Surface treatment
- No
- Nitrided
-
Boring method
- Grinding
- Wire cutting & polishing
- Reaming
-
Tapered or not
- Yes
- No
-
Center pin tip shape
-
P (Tip diameter)(mm)
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
Related Categories to Ejector Sleeves
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy