(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Air Blow Guns, Nozzles for Air Blow Guns,（Nozzle Shape：Long）
Not only the main body, but also nozzles and tubes can be purchased.
[What are air blow guns?]
Air blow guns are tools for blowing dust or moisture away using air. The body material can also be selected from various materials, including metals such as aluminum and resins such as polypropylene. The nozzle can be chosen from a number of types, such as silent types and air volume amplification types.
| Days to Ship |
|
|---|
-
Pneumatic Blow Gun BG-50 Series
CHIYODA
Flow rate is easily adjustable. Two air supply ports provided for your convenience.
Standard Price: MYR 92.94- Days to Ship: 4 Day(s) or more -
Joplaster II - Optional PP Resin Long Nozzle
JOPLAX
Plastic nozzle not prone to damage objects it comes into contact with. No adapter required.
[Features]
For air blow work in narrow or deep spaces, such as for air injection during crating and packaging.
Not prone to damage objects it comes into contact with, and ultra-light (7 g).
· No adapter required. Just remove the Joplaster II standard nozzle and attach.Standard Price: MYR 29.04 Days to Ship: 4 Day(s) or more -
Can Be Used With Air Blow Gun / Suspended Air Blow Gun, Slender Nozzle
KURITA
Thin pipe design makes it easier to clean gaps.
Standard Price: MYR 42.81 Days to Ship: 4 Day(s) or more -
MEIJIKIKAI
[Features]
・ A large amount of secondary air is sucked in with a small amount of compressed air, and a large suction force is obtained
・ When the ball valve is closed, it blows away, and when it is opened, it sucks
・ Since compressed air is the power source and there are no rotating parts, there are few failures, and it is an explosion-proof type and safe
・ The passage circuit is cylindrical and has no roughness, so there is no worry of clogging inside
・ VCM-DF-1 can be used at any angle as the air pipe can be bent freely by hand.
[Applications]
・ Cleaning: Sucking and blowing off metal cutting chips, polishing powder, sand, sawdust, sewing thread waste, etc.
・ Collecting: Collecting barrel sand, sandblast sand, small parts, etc.
・ Cooling: Cooling molds, castings, forgings, welds, etc., and removing foreign objects by suction- CAD ：
- 2D
Standard Price: MYR 836.44- Days to Ship: 4 Day(s) or more -
SMC
An air blow gun from SMC.
[Features]
· A 20% reduction in power consumption can be achieved with the SMC "Blow Gun" + "S Coupler" + "Coil Tube."
· Pressure loss of 1% or less (nozzle size: ø2.5).
· Available nozzles: male thread nozzle, high-efficiency nozzle with male thread. Low-noise nozzle with male thread, copper tube nozzle.Days to Ship: 3 Day(s) or more -
SMC
Nozzle for blow, KN Series.
[Features]
·Nozzle Connection Port Type: Male thread, insertion, single-action, compression.
·Fluid: Air / coolant liquid.
·Maximum Operating Pressure: 1 MPa (0.3 MPa with OST pipe).
· Ambient and fluid temperature: -5 to +60°C (no freezing).
·Threaded section seal: None.
·Copper-free (Standard): All brass parts are electroless nickel plated.Standard Price: MYR 26.62- Days to Ship: 3 Day(s) or more -
JOPLASTAR II, Option, Aluminum Long Nozzle
JOPLAX
Lightweight aluminum nozzle. Available in two sizes: 200 mm and 300 mm. No need for adapter.
[Features]
· No need for an adapter. Simply remove the JOPLASTAR II standard nozzle and retighten the cap.
· A plastic safety shield (SL-590) can also be usedStandard Price: MYR 66.80- Days to Ship: 4 Day(s) or more -
MEIJIKIKAI
The noise level is approx. 10 dB lower than the conventional one. The amount ejected from the nozzle is 3 times the amount of air consumed.
[Features]
・ The noise level is approx. 10 dB lower than the conventional product.
・ Approx. 3 times as much air consumed is ejected from the nozzle tip
・ It reduced air consumption by 14% compared to conventional products
・ Collision efficiency increased by 7% compared to conventional products (At 0.5 MPa)
・ The same power can be output with less air consumption, which has the effect of reducing compressor power consumption.- CAD ：
- 2D
Standard Price: MYR 150.92- Days to Ship: 4 Day(s) or more -
Can Be Used With Air Blow Gun / Suspended Air Blow Gun, Long Nozzle
KURITA
Hard type with hexagonal bar material.
Standard Price: MYR 38.95- Days to Ship: 4 Day(s) or more -
Can Be Used With Air Blow Gun / Suspended Air Blow Gun, Adjustable Nozzle
KURITA
Although compact, it has air flow approximately 4 times a normal nozzle
[Features]
· Freely bends a large amountStandard Price: MYR 72.43- Days to Ship: 1 Day(s) or more -
for Air Tool Series Extension Nozzle Adapter Spout Gun SP Series SP100 and 200
KURITA
Can also be used with air guns.
[Features]
· Can also be used with air guns.
· Using the long nozzle adapter lets you feed water over long distances.Standard Price: MYR 162.33 Days to Ship: 4 Day(s) or more -
MEIJIKIKAI
The noise level is approx. 10 dB lower than the conventional one. The amount ejected from the nozzle is 3 times the amount of air consumed.
[Features]
・ The noise level is approx. 10 dB lower than the conventional product.
・ Approx. 3 times as much air consumed is ejected from the nozzle tip
・ It reduced air consumption by 14% compared to conventional products
・ Collision efficiency increased by 7% compared to conventional products (At 0.5 MPa)
・ The same power can be output with less air consumption, which has the effect of reducing compressor power consumption.Standard Price: MYR 150.92- Days to Ship: 4 Day(s) or more -
MEIJIKIKAI
Long nozzle with tip angles ranging from 0° and 45°.
[Features]
· Trigger type, quick joint type, jet nozzle, long handle type and two-bending angles, 0° and 45°.- CAD ：
- 2D
Standard Price: MYR 349.22- Days to Ship: 9 Day(s) or more -
MEIJIKIKAI
Noise reduced by 10dB compared with conventional models. The ejection volume from the nozzle is three times greater than the air consumption volume.
[Features]
· Maximum operating pressure of 1.57 MPa.
· A rubber tip nozzle (RC-20) and a transparent shield nozzle (SN-22) are provided as options only for M305.Standard Price: MYR 179.02- Days to Ship: 9 Day(s) or more -
Copper Tube Long Nozzle Set VMG1 Series
SMC
Nozzle set for blow guns.
[Features]
· Long nozzles.
· Outer diameter: 6 mm, 8 mm.
· Hex width across flats: 12 mm, 14 mm.Standard Price: MYR 50.07- Days to Ship: 3 Day(s) or more
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Type |
| Nozzle Shape |
| Features |
| Connection Type of Air Supply Port |
| Connecting Port Type of Nozzle |
| Body Material |
| Nozzle Material |
| Max. Operating Pressure(MPa) |
| Flat Nozzle Width(mm) |
| Round Nozzle Dia.(Ø) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | CHIYODA | JOPLAX | KURITA | MEIJIKIKAI | SMC | SMC | JOPLAX | MEIJIKIKAI | KURITA | KURITA | KURITA | MEIJIKIKAI | MEIJIKIKAI | MEIJIKIKAI | SMC |
| Product Series | Can Be Used With Air Blow Gun / Suspended Air Blow Gun, Slender Nozzle | Can Be Used With Air Blow Gun / Suspended Air Blow Gun, Long Nozzle | Can Be Used With Air Blow Gun / Suspended Air Blow Gun, Adjustable Nozzle | for Air Tool Series Extension Nozzle Adapter Spout Gun SP Series SP100 and 200 | |||||||||||
| CAD |
|
|
|
|
| ||||||||||
| Days to Ship | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 1 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 3 Day(s) or more |
| Type | Air Blow Gun Body with Nozzle | Nozzle | Nozzle | Air Blow Gun Body with Nozzle | Air Blow Gun Body with Nozzle | Nozzle | Nozzle | Air Blow Gun Body with Nozzle | Nozzle | Nozzle | Air Blow Gun Body with Nozzle | Air Blow Gun Body with Nozzle | Air Blow Gun Body with Nozzle | Air Blow Gun Body with Nozzle | Nozzle |
| Nozzle Shape | Long | Long | Long | Long | Long | Long | Long | Long | Long | Long | Long | Long | Long | Long | Long |
| Features | Standard / Flow Rate Control | Standard | Standard | Standard / Flexible | Standard / Rubber On Tip | Standard | Standard | Standard | Standard | Standard | Standard | Flexible | Standard | Flexible | Standard |
| Connection Type of Air Supply Port | Tapped | - | - | - | One-Touch Coupling ～ Tapped | - | - | - | - | - | Tapped | - | - | - | - |
| Connecting Port Type of Nozzle | - | Tapped | - | - | Threaded | Insertion Type | Tapped | - | - | - | Threaded | - | - | - | Threaded |
| Body Material | Polyacetal | - | - | - | PBT (Polybutylene Terephthalate) | - | - | - | - | - | Aluminum | - | - | - | - |
| Nozzle Material | Brass | Resin | Brass | - | Brass | Brass | Aluminum | - | Brass | Brass | Brass | - | - | - | Brass |
| Max. Operating Pressure(MPa) | 1.6 | - | - | - | 1 | 1 | - | - | - | - | - | - | - | - | 1 |
| Flat Nozzle Width(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Round Nozzle Dia.(Ø) | - | - | - | - | 1.5 ～ 3.5 | - | - | - | 5 ～ - | - | - | - | - | - | 1.5 ～ 3.5 |
Loading...
Configure
Specification/Dimensions
-
Type
- Air Blow Gun Body with Nozzle
- Nozzle
- Related Components
- Air Blow Gun Main Body, without Nozzle
-
Nozzle Shape
-
Features
- Standard
- Air-Amplify
- Low Noise
- Flow Rate Control
- Rubber On Tip
- Pressure Resistant
- Heat Resistant
- Wide-Angle
- Flexible
-
Connection Type of Air Supply Port
-
Connecting Port Type of Nozzle
- Threaded
- Tapped
- Insertion Type
- One-Touch
- Swaged
-
Body Material
-
Nozzle Material
- Brass
- Aluminum
- Resin
- Stainless Steel
-
Max. Operating Pressure(MPa)
-
Flat Nozzle Width(mm)
-
Round Nozzle Dia.(Ø)
Narrow search by specifying Manufacturer
-
- MEIJIKIKAI (5)
- KURITA (4)
- SMC (3)
- JOPLAX (2)
- CHIYODA (1)
- FESTO (0)
- KOGANEI (0)
- MAEDASHELL (0)
- KINKISEISAKUSYO (0)
CAD
-
- 2D
- 3D
Related Categories to Air Blow Guns, Nozzles for Air Blow Guns,
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy