(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Oil Seals（Seal Material：Nitrile Rubber）
| Days to Ship |
|
|---|
-
NOK
A metal rotation seal (around the boundary) with a dust lip.
Features: Oil seal for very fine dust duty on one side, and fluid sealed on the other side.
Primary Uses: Oil seal for dusty environments (Maximun pressure: 0.03 Mpa {0.3 fgf/cm2})
Shaft Motion: Rotating.
Standard Price: MYR 17.17- Days to Ship: 2 Day(s) or more -
Standard Price: MYR 13.55- Days to Ship: 2 Day(s) or more -
Standard Price: MYR 15.91- Days to Ship: 2 Day(s) or more -
Oil Seal U Type Basic Model UE Type
MUSASHI_OILSEAL
A U type oil seal is used if it is necessary to eliminate foreign materials entering from outside. As common as type A in rotation applications.
[Features]
· An oil seal seals off lubricant leakages in bearings. By preventing the penetration of dust and water and other external objects, the seal helps protect the bearings.
· Bearing part precision is maintained and a reduction in lubricating oil usage provides significant benefits in terms of bearing corrosion repair costs, offsetting seal equipment costs.
· Essential for driving shafts for the purpose of sealing in fluids and gases, in addition to lubricant oil.
· Form factor is small making installation and removal easy without requiring a lot of space, which is useful in making equipment small and lightweightStandard Price: MYR 11.10- Days to Ship: 2 Day(s) or more -
Standard Price: MYR 32.95- Days to Ship: 4 Day(s) or more -
FORBO SIEGLING
General-purpose type compatible with a wide range of shaft diameters. [Liquid to Be Sealed]Lubricant oil, water, grease
Standard Price: MYR 22.75- Days to Ship: 5 Day(s) or more -
NOK
A metal rotation seal (around the boundary) with a dust lip.
Features: Oil seal for very fine dust duty on one side, and fluid sealed on the other side.
Primary Uses: Oil seal for dusty environments (Maximun pressure: 0.03 Mpa {0.3 fgf/cm2})
Shaft Motion: Rotating.
Standard Price: MYR 17.17- Days to Ship: 2 Day(s) or more -
Standard Price: MYR 7.12- Days to Ship: 4 Day(s) or more -
MISUMI
[Features]·A double lip-type oil seal. [Material]·Nitrile rubber (NBR).
- Volume Discount
Standard Price: MYR 14.84- Days to Ship: 1 Day(s) or more -
Standard Price: MYR 45.10- Days to Ship: 4 Day(s) or more -
Oil Seal A Type Basic Model AD Type
MUSASHI_OILSEAL
The type A oil seal is the most commonly used type of oil seal for rotation applications. Generally used alone if the object to be sealed is uni-directional.
Standard Price: MYR 9.75- Days to Ship: 4 Day(s) or more -
Standard Price: MYR 13.02- Days to Ship: 4 Day(s) or more -
Standard Price: MYR 13.55- Days to Ship: 4 Day(s) or more -
Standard Price: MYR 29.05- Days to Ship: 8 Day(s) or more -
Standard Price: MYR 24.76- Days to Ship: 4 Day(s) or more -
MISUMI
[Features]·A single lip-type oil seal. [Material]·Nitrile rubber (NBR).
- Volume Discount
Standard Price: MYR 10.44- Days to Ship: 4 Day(s) or more -
FORBO SIEGLING
Wide tapered cross-section to increase the tightness of the V-ring seal.
Standard Price: MYR 25.28- Days to Ship: 5 Day(s) or more -
Oil Seal, A Type Basic Type AC Type
MUSASHI_OILSEAL
Type A oil seal is the most commonly used type of oil seal for rotation applications. Generally, it is used individually when the sealing target is placed on one side.
[Features]
· An oil seal seals off lubricant leakages in bearings. By preventing the penetration of dust and water and other external objects, the seal helps protect the bearings.
· Bearing part precision is maintained and a reduction in lubricating oil usage provides significant benefits in terms of bearing corrosion repair costs, offsetting seal equipment costs.
· Essential for driving shafts for the purpose of sealing in fluids and gases, in addition to lubricant oil.
· Form factor is small making installation and removal easy without requiring a lot of space, which is useful in making equipment small and lightweightStandard Price: MYR 10.49- Days to Ship: 10 Day(s) or more -
NOK, Standard Oil Seal, VB Type
NOK
*V-type oil seal V type cannot be used in locations subject to pressure.
Standard Price: MYR 17.17- Days to Ship: 4 Day(s) or more -
NOK, Standard Oil Seal, KC Type
NOK
*V-type oil seal V type cannot be used in locations subject to pressure.
Standard Price: MYR 23.25- Days to Ship: 9 Day(s) or more -
Oil Seal Type KE Type Basic Model
MUSASHI_OILSEAL
Widely used as a grease seal. Also used accessorily in combination with A-type oil seal (dust seal).
[Features]
· Oil seals protect from lubricant leakages in bearings. By preventing the penetration of dust, water, and other external bodies, they help protect the bearings.
· To assure the maintenance of precision in the bearing part and reduce lubricating oil usage, the seal facility can help reduce costs in terms of bearing corrosion maintenance.
· Essential to drive shafts for the purpose of sealing fluid and gas, in addition to lubrication.
· The small form makes installation and removal easy without requiring a lot of space, which is useful in making equipment small and lightweight.Standard Price: MYR 8.06- Days to Ship: 4 Day(s) or more -
Standard Price: MYR 23.15- Days to Ship: 4 Day(s) or more -
NOK
Rotation Seal 2-Liquid Separation, Metal Outer Circumference Type.
Standard Price: MYR 67.04- Days to Ship: 8 Day(s) or more -
NOK
A rotational seal for separating two liquids; rubber-circumference type.
Standard Price: MYR 42.56- Days to Ship: 8 Day(s) or more -
Oil Seal Type K Basic Model KD Made
MUSASHI_OILSEAL
Widely used as a grease seal. Also used accessorily in combination with A-type oil seal (dust seal).
Standard Price: MYR 8.73- Days to Ship: 4 Day(s) or more -
NOK
Features: Oil seal in which sealing lip is placed on the outer periphery; best for rotating housing structures.
Primary Uses: Oil or grease seal with a rotating housing structures.
Shaft Motion: Rotating. (Housing)
Standard Price: MYR 29.90- Days to Ship: 4 Day(s) or more -
Standard Price: MYR 8.80- Days to Ship: 4 Day(s) or more -
NOK
Large-diameter seal for rotation. Single lip type with metal outer diameter.
Standard Price: MYR 870.56- Days to Ship: 8 Day(s) or more -
HMS Type Peripheral Metal Oil Seal Spring
JTEKT KOYO
1. Compact/lightweight — contributing to resource saving.
The seal width has been reduced making it compact while retaining the sealing performance.
It is useful for lightweight/compact machines and resource saving.
2. The optimal lip structure demonstrates a high sealing performance
Uses a wire contact lip method with the appropriate tension force.
Demonstrates a high sealing performance at low torque without loss of conformability/eccentricity resistance.
3. Rubber material with a high self-lubricating performance, low heat generation, and long life
The rubber oil seal material has a high self-lubricating performance—that is based on many years of research and testing—and suppresses chemical change, such as hardening, softening, and aging.
Superior durability demonstrating long-life with low heat generation—even at high peripheral speeds.
4. High sealability and long life due to hydrodynamic rib
(Perfect seal, helix seal, and super helix seal)
The sealing performance and service life of the oil seal have been dramatically improved by the special spiral thread (hydro dynamic rib) that is provided in one or both directions.Standard Price: MYR 29.58- Days to Ship: 7 Day(s) or more -
MHSA-Approved Rubber Periphery Oil Seals With Spring and Auxiliary Lip
JTEKT KOYO
1. Contributes to weight reduction, size reduction and the saving of resources
More compact with a smaller seal width, but retains sealing performance.
It is useful for lightweight and compact machines, which saves on resources.
2. Optimal lip structure to ensure high sealing performance
Uses line contact lip type with appropriate tension.
Demonstrates superb sealing properties at low torques without sacrificing tracking properties or eccentricity resistance.
3. Rubber material of high self-lubrication properties, which leads to low heat generation and long life
The rubber materials of the oil seal are highly self-lubricating based on research that has been carried out over many years and professional experience, and the materials inhibit chemical changes, such as hardening, softening, and aging.
Excellent durability and heat resistant even under high peripheral speed with a long lifespan.
4. High sealing ability and long life span due to hydro dynamic rib
(Perfect seal, helix seal and super helix seal)
Oil seal sealing performance and life span have improved rapidly with the special spiral screw that has been installed in one or both directions (hydro dynamic rib).Standard Price: MYR 31.86- Days to Ship: 7 Day(s) or more -
FORBO SIEGLING
Cross section type V ring seal suitable for designs with narrow axial direction space. Optimal for applications in confined spaces in combination with a labyrinth seal.
Standard Price: MYR 135.52- Days to Ship: 9 Day(s) or more -
NOK, General Oil Seal, Large-Diameter TB Type
NOK
Large-diameter seal for rotation with a dust lip. Metal periphery.
Standard Price: MYR 1,300.34- Days to Ship: 7 Day(s) or more -
HMSA Type Peripheral Metal Oil Packing Spring With Auxiliary Lip
JTEKT KOYO
1. Contributing to weight reduction, size reduction, and resource saving. More compact with a smaller seal width, but retains sealing performance. Useful for lightweight, compact, resource saving in machines.
2. Optimal lip structure to ensure high sealing performance. Uses line contact lip type with appropriate tension. Demonstrates superb sealing properties at low torques without sacrificing tracking properties or eccentricity resistance.
3. Rubber material of high self-lubrication property, achieving low heat generation and long life. The rubber materials of the oil seal have high self-lubrication developed with research and years of experience, and inhibit chemical changes such as hardening, softening, and aging. Excellent durability, and heat resistant even under high peripheral speed with a long lifespan.
4. High sealing ability and long lifespan thanks to the hydro-dynamic rib. Perfect seal, helix seal, and super helix seal. Oil seal sealing performance and lifespan improved with the special spiral screw installed in one or both directions (hydro-dynamic rib).Standard Price: MYR 33.30- Days to Ship: 6 Day(s) or more -
MH Type Peripheral Rubber Oil Seal Without Spring
JTEKT KOYO
1. Contributing to weight reduction, size reduction, and resource saving. More compact with a smaller seal width, but retains sealing performance. Useful for lightweight, compact, resource saving in machines.
2. Optimal lip structure to ensure high sealing performance. Uses line contact lip type with appropriate tension. Demonstrates superb sealing properties at low torques without sacrificing tracking properties or eccentricity resistance.
3. Rubber material of high self-lubrication property, achieving low heat generation and long life. The rubber materials of the oil seal have high self-lubrication developed with research and years of experience, and inhibit chemical changes such as hardening, softening, and aging. Excellent durability, and heat resistant even under high peripheral speed with a long lifespan.
4. High sealing ability and long lifespan thanks to the hydro-dynamic rib. Perfect seal, helix seal, and super helix seal. Oil seal sealing performance and lifespan improved with the special spiral screw installed in one or both directions (hydro-dynamic rib).Standard Price: MYR 26.03- Days to Ship: 7 Day(s) or more -
Oil Seal U Type Basic Type UD Type
MUSASHI_OILSEAL
A U type oil seal is used if it is necessary to eliminate foreign materials entering from outside. As common as type A in rotation applications.
[Features]
· An oil seal seals off lubricant leakages in bearings. By preventing the penetration of dust and water and other external objects, the seal helps protect the bearings.
· Bearing part precision is maintained and a reduction in lubricating oil usage provides significant benefits in terms of bearing corrosion repair costs, offsetting seal equipment costs.
· Essential for driving shafts for the purpose of sealing in fluids and gases, in addition to lubricant oil.
· Form factor is small making installation and removal easy without requiring a lot of space, which is useful in making equipment small and lightweightStandard Price: MYR 12.24- Days to Ship: 4 Day(s) or more -
NOK General Oil Seal, Large-Diameter, SB Type
NOK
Large-diameter seal, single lip, outer periphery metal type, for rotation.
Standard Price: MYR 862.96- Days to Ship: 8 Day(s) or more -
NOK
*K type oil seals cannot be used in areas where pressure is applied.
Standard Price: MYR 32.28- Days to Ship: 9 Day(s) or more -
NOK
Product specifications, Product photos, Catalog products, etc., are in preparation. [Part Number]BM1214A0
Standard Price: MYR 22.93 Days to Ship: 9 Day(s) or more -
MHS Type Peripheral Rubber Oil Seal Spring
JTEKT KOYO
1. Contributing to weight reduction, size reduction, and resource saving. More compact with a smaller seal width, but retains sealing performance. Useful for lightweight, compact, resource saving in machines.
2. Optimal lip structure to ensure high sealing performance. Uses line contact lip type with appropriate tension. Demonstrates superb sealing properties at low torques without sacrificing tracking properties or eccentricity resistance.
3. Rubber material of high self-lubrication property, achieving low heat generation and long life. The rubber materials of the oil seal have high self-lubrication developed with research and years of experience, and inhibit chemical changes such as hardening, softening, and aging. Excellent durability, and heat resistant even under high peripheral speed with a long lifespan.
4. High sealing ability and long lifespan thanks to the hydro-dynamic rib. Perfect seal, helix seal, and super helix seal. Oil seal sealing performance and lifespan improved with the special spiral screw installed in one or both directions (hydro-dynamic rib).Standard Price: MYR 28.82- Days to Ship: 7 Day(s) or more
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Shaft Dia. d(φ) |
| Sealing Subject Liquid |
| Sliding Surface |
| Environment, Applications |
| Seal Material |
| Seal Rim Area Material |
| Dust Lip |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | NOK | NOK | NOK | MUSASHI_OILSEAL | NOK | FORBO SIEGLING | NOK | NOK | MISUMI | NOK | MUSASHI_OILSEAL | NOK | NOK | NOK | NOK | MISUMI | FORBO SIEGLING | MUSASHI_OILSEAL | NOK | NOK | MUSASHI_OILSEAL | NOK | NOK | NOK | MUSASHI_OILSEAL | NOK | NOK | NOK | JTEKT KOYO | JTEKT KOYO | FORBO SIEGLING | NOK | JTEKT KOYO | JTEKT KOYO | MUSASHI_OILSEAL | NOK | NOK | NOK | JTEKT KOYO |
| Product Series | MHSA-Approved Rubber Periphery Oil Seals With Spring and Auxiliary Lip | HMSA Type Peripheral Metal Oil Packing Spring With Auxiliary Lip | |||||||||||||||||||||||||||||||||||||
| CAD |
|
| |||||||||||||||||||||||||||||||||||||
| Days to Ship | 2 Day(s) or more | 2 Day(s) or more | 2 Day(s) or more | 2 Day(s) or more | 4 Day(s) or more | 5 Day(s) or more | 2 Day(s) or more | 4 Day(s) or more | 1 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 8 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 5 Day(s) or more | 10 Day(s) or more | 4 Day(s) or more | 9 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 8 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 9 Day(s) or more | 7 Day(s) or more | 6 Day(s) or more | 7 Day(s) or more | 4 Day(s) or more | 8 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 7 Day(s) or more |
| Shaft Dia. d(φ) | 7 ～ 240 | 6 ～ 280 | 7 ～ 240 | 6 ～ 200 | 7 ～ 62 | 2.7-3.5 ～ 290-310 | 8 ～ 300 | 10 ～ 380 | 10 ～ 50 | 25 ～ 190 | 5 ～ 160 | 3 ～ 725 | 7 ～ 300 | 20 ～ 700 | 16 ～ 250 | 10 ～ 35 | 4.5-5.5 ～ 195-210 | 6 ～ 180 | 7 ～ 200 | 10 ～ 90 | 4 ～ 90 | 8 ～ 160 | 50 ～ 110 | 35 ～ 65 | 12 ～ 150 | 30 ～ 140 | 15 ～ 240 | 310 ～ 630 | 17 ～ 190 | 8 ～ 240 | 105-115 ～ 195-210 | 310 ～ 640 | 17 ～ 300 | 8 ～ 90 | 10 ～ 200 | 305 ～ 700 | 32 ～ 64 | 22 | 8 ～ 170 |
| Sealing Subject Liquid | Lubricant | Lubricant | Lubricant / Water / Grease / Alcohol | Lubricant / Grease / Gasoline | Lubricant | Lubricant / Water / Grease | Lubricant | Grease | Lubricant / Grease | Lubricant | Lubricant / Grease / Gasoline | Grease | Lubricant / Grease | Lubricant / Water | Lubricant / Grease | Lubricant / Grease | Lubricant / Water / Grease | Lubricant / Grease / Gasoline | Lubricant / Water / Grease / Alcohol | Lubricant / Water / Grease / Alcohol | Grease / Gasoline | Lubricant / Grease | Lubricant / Grease | Lubricant / Grease | Grease / Gasoline | Lubricant / Grease | Grease | Lubricant / Water | Lubricant / Grease | Lubricant / Grease / Gasoline / Alcohol | Lubricant / Water / Grease | Lubricant / Water | Lubricant / Grease | Lubricant / Grease | Lubricant / Grease / Gasoline | Lubricant / Water | Lubricant / Water / Grease / Alcohol | Grease | Lubricant / Grease |
| Sliding Surface | Shaft | Shaft | Shaft | Shaft | Shaft | End Face | Shaft | Shaft | Shaft | Shaft | Shaft | End Face | Shaft | Shaft | Shaft | Shaft | End Face | Shaft | Shaft | Shaft | Shaft | Shaft | Shaft | Shaft | Shaft | Housing Inner Surface | Shaft | Shaft | Shaft | Shaft | End Face | Shaft | Shaft | Shaft | Shaft | Shaft | Shaft | End Face | Shaft |
| Environment, Applications | Abrasion Resistant | Abrasion Resistant | Abrasion Resistant | Standard / Abrasion Resistant / For Rolling Bearing | Abrasion Resistant | Weather Resistant / Abrasion Resistant | Abrasion Resistant | Standard / For Rolling Bearing | Standard | Pressure Resistant | Standard / Abrasion Resistant / For Rolling Bearing | Standard | Abrasion Resistant | Standard | Standard | Standard | Weather Resistant / Abrasion Resistant | Standard / Abrasion Resistant / For Rolling Bearing | Abrasion Resistant | Abrasion Resistant | Standard / Abrasion Resistant / For Rolling Bearing | Standard / Fuel Resistant | Standard | Standard | Standard / Abrasion Resistant / For Rolling Bearing | Standard | Standard / For Rolling Bearing | Standard | Heat Resistant / Cold Resistant / Abrasion Resistant | Heat Resistant / Cold Resistant / Abrasion Resistant | Weather Resistant / Abrasion Resistant | Standard | Heat Resistant / Cold Resistant / Abrasion Resistant | Heat Resistant / Cold Resistant / Abrasion Resistant | Standard / Abrasion Resistant / For Rolling Bearing | Standard | Abrasion Resistant | Standard | Heat Resistant / Cold Resistant / Abrasion Resistant |
| Seal Material | Nitrile Rubber | Nitrile Rubber | Nitrile Rubber | Nitrile Rubber | Nitrile Rubber | Nitrile Rubber | Nitrile Rubber | Nitrile Rubber | Nitrile Rubber | Nitrile Rubber | Nitrile Rubber | Nitrile Rubber | Nitrile Rubber | Nitrile Rubber | Nitrile Rubber | Nitrile Rubber | Nitrile Rubber | Nitrile Rubber | Nitrile Rubber | Nitrile Rubber | Nitrile Rubber | Nitrile Rubber | Nitrile Rubber | Nitrile Rubber | Nitrile Rubber | Nitrile Rubber | Nitrile Rubber | Nitrile Rubber | Nitrile Rubber | Nitrile Rubber | Nitrile Rubber | Nitrile Rubber | Nitrile Rubber | Nitrile Rubber | Nitrile Rubber | Nitrile Rubber | Nitrile Rubber | Nitrile Rubber | Nitrile Rubber |
| Seal Rim Area Material | Rubber (With Metal Core) | Rubber (With Metal Core) | Rubber (With Metal Core) | Rubber (With Metal Core) | Rubber (With Metal Core) | Rubber (No Metal Core) | Metal | Rubber (No Metal Core) | Rubber (With Metal Core) / Metal | Rubber (With Metal Core) | Rubber (With Metal Core) | Rubber (No Metal Core) | Metal | Rubber (No Metal Core) | Metal | Rubber (With Metal Core) / Metal | Rubber (No Metal Core) | Metal | Metal | Rubber (With Metal Core) | Rubber (With Metal Core) | Rubber (With Metal Core) | Metal | Rubber (With Metal Core) | Metal | Rubber (With Metal Core) | Rubber (No Metal Core) | Metal | Metal | Rubber (With Metal Core) | Rubber (No Metal Core) | Metal | Metal | Rubber (With Metal Core) | Metal | Metal | Metal | Rubber (No Metal Core) | Rubber (With Metal Core) |
| Dust Lip | Yes | No | No | Yes | Yes | No | Yes | No | Yes | Yes | No | No | No | No | Yes | No | No | No | No | Yes | No | Yes | No | No | No | No | Yes | No | No | Yes | No | Yes | Yes | No | Yes | No | Yes | No | No |
Loading...
Configure
Specification/Dimensions
-
Shaft Dia. d(φ)
- 2.7-3.5
- 3
- 3.5-4.5
- 4
- 4.5-5.5
- 5
- 5.5-6.5
- 6
- 6.5-8.0
- 7
- 8
- 8.0-9.5
- 9
- 9.5-11.5
- 10
- 11
- 11.5-13.5
- 11.5-12.5
- 12
- 12.5-13.5
- 13
- 13.5-15.5
- 14
- 15
- 15.5-17.5
- 16
- 17
- 17.5-19
- 18
- 19
- 19-21
- 20
- 21
- 21-24
- 22
- 23
- 24
- 24-27
- 25
- 26
- 27
- 27-29
- 28
- 29
- 29-31
- 30
- 31
- 31-33
- 32
- 33
- 33-36
- 34
- 35
- 36
- 36-38
- 37
- 38
- 38-43
- 40
- 42
- 43
- 43-48
- 44
- 45
- 46
- 47
- 48
- 48-53
- 49
- 50
- 51
- 52
- 53-58
- 54
- 55
- 56
- 57
- 58
- 58-63
- 60
- 62
- 63
- 63-68
- 64
- 65
- 66
- 67
- 68
- 68-73
- 70
- 71
- 72
- 73-78
- 74
- 75
- 78
- 78-83
- 80
- 82
- 83-88
- 85
- 88
- 88-93
- 90
- 93-98
- 95
- 98
- 98-105
- 100
- 105
- 105-115
- 110
- 112
- 115
- 115-125
- 120
- 125
- 125-135
- 128
- 130
- 135
- 135-145
- 140
- 145
- 145-155
- 150
- 155
- 155-165
- 160
- 165
- 165-175
- 170
- 175
- 175-185
- 180
- 185
- 185-195
- 190
- 190-210
- 195
- 195-210
- 199
- 200
- 205
- 210
- 210-235
- 220
- 230
- 235
- 235-265
- 240
- 250
- 255
- 260
- 265-290
- 270
- 275
- 280
- 290
- 290-310
- 300
- 305
- 310
- 315
- 320
- 325
- 330
- 340
- 345
- 350
- 360
- 365
- 370
- 375
- 380
- 390
- 395
- 400
- 410
- 415
- 420
- 430
- 440
- 450
- 460
- 465
- 470
- 475
- 480
- 490
- 500
- 510
- 520
- 530
- 550
- 560
- 570
- 580
- 600
- 610
- 620
- 630
- 640
- 650
- 670
- 700
- 725
-
Sealing Subject Liquid
- Lubricant
- Water
- Grease
- Chemical Solution
- Gasoline
- Alcohol
- vapor
-
Sliding Surface
-
Environment, Applications
- Standard
- Fuel Resistant
- Heat Resistant
- Cold Resistant
- Weather Resistant
- Abrasion Resistant
- For Food
- Pressure Resistant
- Chemical Resistant
- Low Friction
- For Rolling Bearing
-
Seal Material
- Nitrile Rubber
- Acrylic Rubber
- Silicon Rubber
- Fluororubber
- Fluororesin
- Nitrile Rubber + Fluoro Resin Baking
- Polytetrafluoroethylene
-
Seal Rim Area Material
-
Dust Lip
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
Related Categories to Oil Seals
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy