(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
| Days to Ship |
|
|---|

Steel Pipe Fitting, Screw-in Type Pipe Fitting, Nipple
RIKEN
Maximum operating pressure: 2.5 MPa (steady flow of water at no more than 120°C), 1.0 MPa (steam, air, gas, and oil at no more than 300°C).
| Standard Price: | MYR 6.97- |
|---|---|
| Days to Ship: | 5 Day(s) or more |

NPT Fittings CU / Conical Union
FUJITOKU
Various fittings of the NPT screws of the taper screw standard for American pipes are available with a short delivery date. Conversion products for JIS standard PT screws are also available. (NPTXPTN/NPTXPTS)
| Days to Ship: | 5 Day(s) or more |
|---|

FUJITOKU
FUJITOKU, screw-in fitting / threaded type flange, NPT Fitting, PN / pipe nipple.
| Standard Price: | MYR 115.75- |
|---|---|
| Days to Ship: | 7 Day(s) or more |

Special Fitting for Piping NPT×PTN/Nipple
FUJITOKU
Nipple for converting NPT thread of American tapered thread standard and JIS standard PT thread.
| Standard Price: | MYR 57.05- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

Pressure Pipe Exterior Cladding 20 K Fitting Tee
CK_KINZOKU
Buried joint for pressure piping.
[Features]
·The socket sleeve is made long and completely wraps around the tube sheath. The gap between the pipe and joint is sealed with a special rubber ring or caulking tape to prevent water from entering and to insulate electrically.
·There is no need to worry about corrosion even when buried in salty soil, soil or concrete where local batteries are likely to occur, or where there is a lot of stray current.
·There is no need to wrap caulking tape around the body of the fitting or where it connects to the pipe, which speeds up the installation of pipes.
·Since vinyl chloride is not used in the resin, it can be recycled together with iron without separation.
·Certified by the Japan Fire Equipment Safety Center.
[Applications]
·For branching of buried pressure piping.
| Standard Price: | MYR 966.30- |
|---|---|
| Days to Ship: | 13 Day(s) or more |

Brass Conversion Inner and Outer Socket NF
ASOH
NF-3000/NF-3100: Sockets for converting from NPT threads (tapered threads for American pipes) to PT threads.
NF-3281: A socket for converting from UNF 1/4 threads to PT threads.
NF-3611: Socket for converting from M6 threads to PT threads.
| Standard Price: | MYR 20.23 |
|---|---|
| Days to Ship: | 4 Day(s) or more |
| Standard Price: | MYR 32.96- |
|---|---|
| Days to Ship: | 7 Day(s) or more |

High Pressure Fitting Female x Female Fitting
YAMATOSANKI
[Features]Oil and water free treated. [Applications]For high pressure gas piping.
| Standard Price: | MYR 168.56- |
|---|---|
| Days to Ship: | 5 Day(s) or more |

Brass Fittings for Steel Pipe/90 Deg. Elbow
MISUMI
[Features]A low-pressure threaded fitting with high corrosion resistance. [Material]C3771
| Standard Price: | MYR 21.83- |
|---|---|
| Days to Ship: | 2 Day(s) or more |

Brass Fittings for Steel Pipe/90 Deg. Elbow/Threaded
MISUMI
[Features]A low-pressure threaded fitting with high corrosion resistance. [Material]C3771
| Standard Price: | MYR 16.97- |
|---|---|
| Days to Ship: | 2 Day(s) or more |
Stainless Steel Screw-In Joints, Equal Dia., 45° Elbow
MISUMI
This is an economy item, The price is cheaper than the MISUMI standard product.
| Standard Price: | MYR 24.24- |
|---|---|
| Days to Ship: | 32 Day(s) |

HITACHI KINZOKU
A JIS B 2301 screw-in type malleable cast iron fitting. Hot-dip zinc plating is excellent for reducing the environmental burden.
[Features]
· A standard ‘Screwed Type Malleable Cast Iron Pipe Fitting’ as specified by JIS B 2301. We also manufacture some non-JIS standard products.
· The main material is Mareburu® (blackheart malleable cast iron). The threaded section has a tapered pipe thread. Hot-dip galvanized surface treatment is applied where the surface is processed.
· Hot-dip galvanization has been changed to a superior plating that reduces the environmental burden (RoSH compliant).
· Environmentally friendly: Lead and cadmium are significantly reduced.
· We use high-purity zinc metal that largely reduces the inclusion content of lead (Pb) and cadmium (Cd).
· Superior manufacturing method: No addition of new heavy metals is required.
· Mass production technology has been established by developing a unique production facility and preprocessing method. Heavy metals including bismuth (Bi) are used to replace of lead.
· Excellent performance: The appearance and performance is equivalent to conventional plated parts.
· Conforms to the specifications that are specified in JIS B 2301 (Screwed Type Malleable Cast Iron Pipe Fittings). The fitting has an exterior glossy plated finish—similar to the conventional products.
| Standard Price: | MYR 7.34- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

HITACHI KINZOKU
A plumbing fitting that uses screw connection for steel pipes with small to medium diameter; JIS B 2301 specifies it as "screwed type malleable cast iron pipe fitting". Hot zinc plating reduces environmental burden.
| Standard Price: | MYR 15.27- |
|---|---|
| Days to Ship: | 5 Day(s) or more |

Pipe Fitting, 45° Female Male Elbow (With Clamp)
HITACHI KINZOKU
[Features]
A pipe fitting that uses screws to connect steel pipes of small to medium diameter, referred to in JIS B2301 as a "Screw-in type malleable cast iron pipe fitting".
Some non-JIS standard products are also produced.
· The main material is Mareburu® (blackheart malleable cast iron), the threaded portion has a taper pipe thread, and hot-dip galvanization is used if the surface is to be processed.
• Changed to hot-dip galvanization to reduce environmental burden (RoSH compliant).
| Standard Price: | MYR 17.38- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

Pipe Fitting, Female and Male Bend
HITACHI KINZOKU
A plumbing fitting that uses screw connection for steel pipes with a small to medium diameter; JIS B 2301 describes it as a "screw-type, malleable, cast iron pipe fitting." Hot zinc plating reduces the environmental impact.
| Standard Price: | MYR 22.11- |
|---|---|
| Days to Ship: | 5 Day(s) or more |

HITACHI KINZOKU
JIS B 2301 screw-in type malleable cast iron fitting
[Features]
· Environmentally friendly: Lead and cadmium are greatly reduced.
· Uses high purity zinc metal to reduce lead (Pb) and cadmium (Cd) content significantly.
· Excellent manufacturing method: New heavy metal addition is not required.
· Development of original manufacturing facilities and preprocessing methods has established the technology for mass production, and heavy metals such as bismuth (Bi) are used instead of lead.
· Excellent performance: Appearance and performance equivalent to conventional plated parts.
· Satisfies the specifications stipulated in JIS B 2301 (Screw type malleable cast iron pipe fittings), and has a glossy plating on the outside similar to that of conventional products.
| Standard Price: | MYR 9.62- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

HITACHI KINZOKU
A plumbing fitting that uses a screw connection for steel pipes with small to medium diameters; JIS B 2301 specifies it as "screwed type malleable cast iron pipe fitting". Hot zinc plating reduces environmental burden.
| Standard Price: | MYR 12.07- |
|---|---|
| Days to Ship: | 5 Day(s) or more |

HITACHI KINZOKU
A plumbing fitting that uses a screw connection for small/medium-diameter steel pipes. Follows JIS B 2301 specification for a screw-type malleable cast iron pipe fitting. Hot zinc plating reduces effect on environment.
| Standard Price: | MYR 11.22- |
|---|---|
| Days to Ship: | 5 Day(s) or more |

Pipe Fittings - Three-way Reducing T
HITACHI KINZOKU
A small to medium diameter steel pipe fitting that uses screw connection; JIS B 2301 specifies it as "screw-in type malleable cast iron pipe fitting". Hot dip galvanizing reduces impact on the environment.
| Standard Price: | MYR 22.62- |
|---|---|
| Days to Ship: | 5 Day(s) or more |

HITACHI KINZOKU
A plumbing fitting that uses a screw connection for small/medium-diameter steel pipes. Follows JIS B 2301 specification for a screw-type malleable cast iron pipe fitting. Hot zinc plating reduces effect on environment.
| Standard Price: | MYR 34.86- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

HITACHI KINZOKU
JIS B 2301. Hot dip galvanizing is an excellent plating with a low environmental load.
[Features]
· Environmentally friendly: Lead and cadmium are greatly reduced.
· Uses high purity zinc metal to reduce lead (Pb) and cadmium (Cd) content significantly.
· Excellent manufacturing method: New heavy metal addition is not required.
· Development of original manufacturing facilities and preprocessing methods has established the technology for mass production, and heavy metals such as bismuth (Bi) are used instead of lead.
· Excellent performance: Appearance and performance equivalent to conventional plated parts.
· Satisfies the specifications stipulated in JIS B 2301 (Screw type malleable cast iron pipe fittings), and has a glossy plating on the outside similar to that of conventional products.
| Standard Price: | MYR 8.86- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

HITACHI KINZOKU
A small to medium diameter steel pipe fitting that uses screw connection; JIS B 2301 specifies it as "screw-in type malleable cast iron pipe fitting". Hot dip galvanizing reduces impact on the environment.
| Standard Price: | MYR 27.93- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

HITACHI KINZOKU
A plumbing fitting that uses screw connection for steel pipes with a small to medium diameter; JIS B 2301 describes it as a "screw-type, malleable, cast iron pipe fitting." Hot zinc plating reduces the environmental impact.
| Standard Price: | MYR 34.35- |
|---|---|
| Days to Ship: | 6 Day(s) or more |

Pipe Fitting, Union Elbow with Male Screw
HITACHI KINZOKU
A plumbing fitting that uses screw connection for steel pipes with a small to medium diameter; JIS B 2301 describes it as a "screw-type, malleable, cast iron pipe fitting." Hot zinc plating reduces the environmental impact.
| Standard Price: | MYR 39.16- |
|---|---|
| Days to Ship: | 6 Day(s) or more |

HITACHI KINZOKU
A plumbing fitting that uses a screw connection for small/medium-diameter steel pipes. Follows JIS B 2301 specification for a screw-type malleable cast iron pipe fitting. Hot zinc plating reduces effect on environment.
| Standard Price: | MYR 8.86- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

HITACHI KINZOKU
A plumbing fitting that uses a screw connection for small/medium-diameter steel pipes. Follows JIS B 2301 specification for a screw-type malleable cast iron pipe fitting. Hot zinc plating reduces effect on environment.
| Standard Price: | MYR 5.90- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

Pipe Fitting, Cap (With Clamp)
HITACHI KINZOKU
A plumbing fitting that uses a screw connection for small/medium-diameter steel pipes. Follows JIS B 2301 specification for a screw-type malleable cast iron pipe fitting. Hot zinc plating reduces effect on environment.
| Standard Price: | MYR 13.76- |
|---|---|
| Days to Ship: | 5 Day(s) or more |

Pipe Fitting, Horizontal Port Elbow
HITACHI KINZOKU
A plumbing fitting that uses a screw connection for small/medium-diameter steel pipes. Follows JIS B 2301 specification for a screw-type malleable cast iron pipe fitting. Hot zinc plating reduces effect on environment.
| Standard Price: | MYR 29.62- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

Four-Way Pipe Fitting T (Flat Type)
HITACHI KINZOKU
A plumbing fitting that uses a screw connection for small/medium-diameter steel pipes. Follows JIS B 2301 specification for a screw-type malleable cast iron pipe fitting. Hot zinc plating reduces effect on environment.
| Standard Price: | MYR 33.09- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

HITACHI KINZOKU
A tube fitting bushing—manufactured by Hitachi Metals Ltd., with a track record in Japan for top-class quality screw fittings/pipe components.
-Working fluid: water, air, steam, gas, oil
-Surface treatment: as-cast, galvanized
| Standard Price: | MYR 13.25- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

HITACHI KINZOKU
[Features]
▪ Use the HB fitting in piping such as connected water supply piping and Inert gas (carbon dioxide) fire-extinguishing equipment piping that use Schedule 40, 80 of the carbon steel pipe for JIS G 3454 pressure piping.
| Standard Price: | MYR 22.36- |
|---|---|
| Days to Ship: | 5 Day(s) or more |

HITACHI KINZOKU
Use the HB fitting for coupling feed water pipes, piping connected water supplies, transporting fire extinguishing equipment with inert gases (carbon dioxide), and other piping subject to Schedules 40 and 80 of JIS G 3454, carbon steel tube for pressure services.
| Standard Price: | MYR 16.63- |
|---|---|
| Days to Ship: | 5 Day(s) or more |

HITACHI KINZOKU
Use the HB fitting for coupling feed water pipes, piping for connected water supply and fire extinguishing equipment carrying inert gas (carbon dioxide) and other piping subject to Schedules 40 and 80 of JIS G 3454, "Carbon steel tube for pressure service."
| Standard Price: | MYR 16.96- |
|---|---|
| Days to Ship: | 6 Day(s) or more |

HITACHI KINZOKU
Use the HB fitting for coupling feed water pipes, piping for connected water supply and fire extinguishing equipment carrying inert gas (carbon dioxide) and other piping subject to Schedules 40 and 80 of JIS G 3454, "Carbon steel tube for pressure service."
| Standard Price: | MYR 209.40- |
|---|---|
| Days to Ship: | 5 Day(s) or more |

HITACHI KINZOKU
Use the HB fitting for coupling feed water pipes, piping connected water supplies, transporting fire extinguishing equipment with inert gases (carbon dioxide), and other piping subject to Schedules 40 and 80 of JIS G 3454, carbon steel tube for pressure services.
| Standard Price: | MYR 23.03- |
|---|---|
| Days to Ship: | 5 Day(s) or more |
| Standard Price: | MYR 46.86- |
|---|---|
| Days to Ship: | 4 Day(s) or more |
| Standard Price: | MYR 9.32- |
|---|---|
| Days to Ship: | 4 Day(s) or more |
| Standard Price: | MYR 11.39 |
|---|---|
| Days to Ship: | 4 Day(s) or more |
| Standard Price: | MYR 28.99- |
|---|---|
| Days to Ship: | 4 Day(s) or more |
| Standard Price: | MYR 90.40- |
|---|---|
| Days to Ship: | 4 Day(s) or more |
| Standard Price: | MYR 17.82- |
|---|---|
| Days to Ship: | 4 Day(s) or more |
| Standard Price: | MYR 80.16 |
|---|---|
| Days to Ship: | 4 Day(s) or more |
| Standard Price: | MYR 82.32- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

White Fitting Reducing Special Tees
YODOSHI
White fitting reducing special tees suitable for mainly sprinkler piping and foam fire extinguishing.
| Standard Price: | MYR 111.76- |
|---|---|
| Days to Ship: | 7 Day(s) or more |

Fire-Protection Pipe Fittings, Three-way Unequal Diameter Tees
YODOSHI
Anti-fire pipe fittings and 3-way uneven-diameter tees, suitable for sprinkler and foam piping.
| Standard Price: | MYR 25.00- |
|---|---|
| Days to Ship: | 7 Day(s) or more |
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Specifications |
| Connecting Shape |
| Environmentally Friendly |
| Connection Type |
| Properties / applications |
| Material |
| Nominal of Thread M1 |
| Connection Thread Type M1 |
| Connection Thread Type M2 |
| Nominal of Thread M2 |
| Applicable Fluid |
| Type |
| Max. Operating Pressure(MPa) |
| Surface Treatment |
| Types of Screw 3 (When Different Dia. or Different Type Screw) |
| Nominal of Thread 3(Different Diameters or Different Type Screw) |
| Types of Screw 4 (When Different Dia. or Different Type Screw) |
| Nominal of Thread 4(Different Diameters or Different Type Screw) |
| Material Details |
| Divisions of Max. Operating Pressure |
| Related Part Type |
| Interior Resin Lining |
| Brand | RIKEN | FUJITOKU | FUJITOKU | FUJITOKU | CK_KINZOKU | ASOH | FUJIIKOUATU | YAMATOSANKI | MISUMI | MISUMI | MISUMI | HITACHI KINZOKU | HITACHI KINZOKU | HITACHI KINZOKU | HITACHI KINZOKU | HITACHI KINZOKU | HITACHI KINZOKU | HITACHI KINZOKU | HITACHI KINZOKU | HITACHI KINZOKU | HITACHI KINZOKU | HITACHI KINZOKU | HITACHI KINZOKU | HITACHI KINZOKU | HITACHI KINZOKU | HITACHI KINZOKU | HITACHI KINZOKU | HITACHI KINZOKU | HITACHI KINZOKU | HITACHI KINZOKU | HITACHI KINZOKU | HITACHI KINZOKU | HITACHI KINZOKU | HITACHI KINZOKU | HITACHI KINZOKU | KOYO | KOYO | KOYO | KOYO | KOYO | KOYO | KOYO | KOYO | YODOSHI | YODOSHI |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Product Series | Fire-Protection Pipe Fittings, Three-way Unequal Diameter Tees | ||||||||||||||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||||||||||||||||||||
| Days to Ship | 5 Day(s) or more | 5 Day(s) or more | 7 Day(s) or more | 4 Day(s) or more | 13 Day(s) or more | 4 Day(s) or more | 7 Day(s) or more | 5 Day(s) or more | 2 Day(s) or more | 2 Day(s) or more | 32 Day(s) | 4 Day(s) or more | 5 Day(s) or more | 4 Day(s) or more | 5 Day(s) or more | 4 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 5 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 6 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more |
| Specifications |
| ||||||||||||||||||||||||||||||||||||||||||||
| Connecting Shape | Nipple | Male, Female Union | - | - | Tees | Bushings/Male Female Socket | Nipple | Socket | Elbow | Elbow | Street Elbow | Elbow | Elbow | Street Elbow | Street Elbow | - | Elbow | Tees | Tees | Tees | - | Male, Female Union | Elbow | Street Elbow | Plug | Plug | Cap | 3-Directional Elbow | Tees | Bushings/Male Female Socket | Tees | - | Bushings/Male Female Socket | Flange | - | Tees | Cap | Plug | Elbow | Tees | Socket | Tees | Street Elbow | Tees | Tees |
| Environmentally Friendly | - | - | - | - | - | - | - | - | RoHS compliant (10 substances) | RoHS compliant (10 substances) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Connection Type | Thread <-> Thread, Equal Dia. Same Type | Thread <-> Thread, Equal Dia. Same Type | Thread <-> Thread, Equal Dia. Same Type | Thread <-> Thread, Equal Dia. Same Type | Thread <-> Thread, Equal Dia. Same Type | Thread <-> Thread, Unequal Dia. | Thread <-> Thread, Equal Dia. Same Type | Thread <-> Thread, Equal Dia. Same Type / Thread <-> Thread, Unequal Dia. | Thread <-> Thread, Equal Dia. Same Type | Thread <-> Thread, Equal Dia. Same Type | Thread <-> Thread, Equal Dia. Same Type | Thread <-> Thread, Equal Dia. Same Type | Thread <-> Thread, Equal Dia. Same Type | Thread <-> Thread, Equal Dia. Same Type | Thread <-> Thread, Equal Dia. Same Type | Thread <-> Thread, Equal Dia. Same Type / Thread <-> Thread, Unequal Dia. | Thread <-> Thread, Unequal Dia. | Thread <-> Thread, Equal Dia. Same Type | Thread <-> Thread, Unequal Dia. | Thread <-> Thread, Equal Dia. Same Type | Thread <-> Thread, Equal Dia. Same Type / Thread <-> Thread, Unequal Dia. | Thread <-> Thread, Equal Dia. Same Type | Thread <-> Thread, Equal Dia. Same Type | Thread <-> Thread, Equal Dia. Same Type | Screws | Screws | Screws | Thread <-> Thread, Equal Dia. Same Type | Thread <-> Thread, Equal Dia. Same Type | Thread <-> Thread, Unequal Dia. | Thread <-> Thread, Equal Dia. Same Type / Thread <-> Thread, Unequal Dia. | Thread <-> Thread, Equal Dia. Same Type / Thread <-> Thread, Unequal Dia. | Thread <-> Thread, Unequal Dia. | Flange | Thread <-> Thread, Equal Dia. Same Type | Thread <-> Thread, Equal Dia. Same Type | Screws | Screws | Thread <-> Thread, Equal Dia. Same Type | Thread <-> Thread, Equal Dia. Same Type | Thread <-> Thread, Equal Dia. Same Type / Thread <-> Thread, Unequal Dia. | Thread <-> Thread, Equal Dia. Same Type | Thread <-> Thread, Equal Dia. Same Type / Thread <-> Thread, Unequal Dia. | Thread <-> Thread, Unequal Dia. | Thread <-> Thread, Unequal Dia. |
| Properties / applications | - | - | - | - | - | - | - | - | Non-Magnetic | Non-Magnetic | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Material | Cast Iron | Stainless Steel / Steel | Stainless Steel / Steel | Stainless Steel / Steel | Cast Iron | Brass | Steel | Stainless Steel / Brass | Brass | Brass | Stainless Steel | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Steel | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Steel | Steel | Steel | Steel | Steel | Brass | Brass | Brass | Brass | Brass | Brass | Brass | Brass | Cast Iron | Cast Iron |
| Nominal of Thread M1 | 1/8B(6A) / 1/4B(8A) / 3/8B(10A) / 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) / 2 1/2B(65A) / 3B(80A) / 4B(100A) / 5B(125A) / 6B(150A) | 1/4B(8A) / 3/8B(10A) / 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) | 1/4B(8A) / 3/8B(10A) / 1/2B(15A) / 3/4B(20A) / 1B(25A) | 1/4B(8A) / 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) | 2 1/2B(65A) / 4B(100A) | 1/4-28 / M6×P1.0 | 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) | 1/4B(8A) / 3/8B(10A) / 1/2B(15A) / W22-14 | 1/8B(6A) / 1/4B(8A) / 3/8B(10A) / 1/2B(15A) | 1/8B(6A) / 1/4B(8A) / 3/8B(10A) / 1/2B(15A) | 1/4B(8A) / 3/8B(10A) / 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) | 1/8B(6A) / 1/4B(8A) / 3/8B(10A) / 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) / 2 1/2B(65A) / 3B(80A) / 4B(100A) / 5B(125A) / 6B(150A) | 1/8B(6A) / 1/4B(8A) / 3/8B(10A) / 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) / 2 1/2B(65A) / 3B(80A) / 4B(100A) / 5B(125A) / 6B(150A) | 1/4B(8A) / 3/8B(10A) / 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) | 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) | 1/8B(6A) / 1/4B(8A) / 3/8B(10A) / 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) / 2 1/2B(65A) / 3B(80A) / 4B(100A) / 5B(125A) / 6B(150A) | 1/4B(8A) / 3/8B(10A) / 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) / 2 1/2B(65A) / 3B(80A) / 4B(100A) / 5B(125A) / 6B(150A) | 1/8B(6A) / 1/4B(8A) / 3/8B(10A) / 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) / 2 1/2B(65A) / 3B(80A) / 4B(100A) / 5B(125A) / 6B(150A) | 3/8B(10A) / 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) / 2 1/2B(65A) / 3B(80A) | 3/8B(10A) / 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) / 2 1/2B(65A) / 3B(80A) | 1/8B(6A) / 1/4B(8A) / 3/8B(10A) / 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) / 2 1/2B(65A) / 3B(80A) / 4B(100A) / 5B(125A) / 6B(150A) | 1/8B(6A) / 1/4B(8A) / 3/8B(10A) / 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) / 2 1/2B(65A) / 3B(80A) / 4B(100A) / 5B(125A) / 6B(150A) | 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) | 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) | 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) / 2 1/2B(65A) / 3B(80A) / 4B(100A) / 5B(125A) / 6B(150A) | 1/8B(6A) / 1/4B(8A) / 3/8B(10A) | 1/4B(8A) / 3/8B(10A) / 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) / 2 1/2B(65A) / 3B(80A) / 4B(100A) / 5B(125A) / 6B(150A) | 3/8B(10A) / 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) | 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) | 1/4B(8A) / 3/8B(10A) / 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) / 2 1/2B(65A) / 3B(80A) / 4B(100A) / 5B(125A) / 6B(150A) | 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) / 2 1/2B(65A) / 3B(80A) / 4B(100A) / 5B(125A) | 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) / 2 1/2B(65A) / 3B(80A) / 4B(100A) / 5B(125A) | 3/4B(20A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) / 2 1/2B(65A) / 3B(80A) / 4B(100A) | 2B(50A) / 2 1/2B(65A) / 3B(80A) / 4B(100A) / 5B(125A) | 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) / 2 1/2B(65A) / 3B(80A) / 4B(100A) / 5B(125A) | 1/8B(6A) / 1/4B(8A) | 1/8B(6A) / 1/4B(8A) | 1/4B(8A) | 1/8B(6A) / 1/4B(8A) / 3/8B(10A) | 1/4B(8A) / 3/8B(10A) | 1/8B(6A) / 1/4B(8A) / 3/8B(10A) / 1/2B(15A) | 3/8B(10A) | 1/4B(8A) / 1/2B(15A) | 1B(25A) / 1 1/4B(32A) | 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) / 2 1/2B(65A) / 3B(80A) |
| Connection Thread Type M1 | R | NPT (Female thread) | NPT (Male thread) | NPT (Male thread) | Rc | M (Male Thread) / UNF (External Thread) | R | Rc / W (Female Screw) | Rc | R | G | Rc | Rc | Rc | Rc | Rc | Rc | Rc | Rc | Rc | R | Rc | Rc | R | R | R | Rc | Rc | Rc | R | Rc | Rc | R | Rc | R | R | G (Tapped) | R | Rc | R | Rc | Rc | Rc | Rc | Rc |
| Connection Thread Type M2 | - | - | - | R | - | Rc | - | Rc | - | - | - | - | - | R | R | Rc | Rc | - | Rc | R | R | - | - | Rc | - | - | - | - | - | Rc | Rc | Rc | Rc | - | - | - | - | - | - | Rc | Rc | - | R | Rc | Rc |
| Nominal of Thread M2 | - | - | - | 1/4B(8A) / 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) | - | 1/8B(6A) | - | 1/4B(8A) / 3/8B(10A) / 1/2B(15A) | - | - | - | - | - | 1/4B(8A) / 3/8B(10A) / 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) | 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) | 1/8B(6A) / 1/4B(8A) / 3/8B(10A) / 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) / 2 1/2B(65A) / 3B(80A) / 4B(100A) / 5B(125A) | 1/8B(6A) / 1/4B(8A) / 3/8B(10A) / 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) / 2 1/2B(65A) / 3B(80A) / 4B(100A) / 5B(125A) | - | 3/8B(10A) / 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) / 2 1/2B(65A) / 3B(80A) | 3/8B(10A) / 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) / 2 1/2B(65A) / 3B(80A) | 1/4B(8A) / 3/8B(10A) / 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) / 2 1/2B(65A) / 3B(80A) | - | - | 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) | - | - | - | - | - | 1/8B(6A) / 1/4B(8A) / 3/8B(10A) / 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) / 2 1/2B(65A) / 3B(80A) / 4B(100A) / 5B(125A) | 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) / 2 1/2B(65A) | 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2 1/2B(65A) / 3B(80A) | 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) / 2 1/2B(65A) / 3B(80A) | - | - | - | - | - | - | 1/4B(8A) / 3/8B(10A) | 1/4B(8A) / 3/8B(10A) | - | 1/8B(6A) / 1/4B(8A) / 1/2B(15A) | 3/4B(20A) / 1B(25A) | 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) / 2 1/2B(65A) / 3B(80A) |
| Applicable Fluid | Water / Air / Steam / Gas / Oil | Water / Steam / Oil | Water / Steam / Oil | Water / Steam / Oil | Water / Air / Gas / Oil | Water / Air / Oil | Not specified by Manufacturer | Air | Water / Air | Water / Air | Water / Air / Steam / Gas / Chemical / Oil | Water / Air / Steam / Gas / Oil | Water / Air / Steam / Gas / Oil | Water / Air / Steam / Gas / Oil | Water / Air / Steam / Gas / Oil | Water / Air / Steam / Gas / Oil | Water / Air / Steam / Gas / Oil | Water / Air / Steam / Gas / Oil | Water / Air / Steam / Gas / Oil | Water / Air / Steam / Gas / Oil | Water / Air / Steam / Gas / Oil | Water / Air / Steam / Gas / Oil | Water / Air / Steam / Gas / Oil | Water / Air / Steam / Gas / Oil | Water / Air / Steam / Gas / Oil | Water / Air / Steam / Gas / Oil | Water / Air / Steam / Gas / Oil | Water / Air / Steam / Gas / Oil | Water / Air / Steam / Gas / Oil | Water / Air / Steam / Gas / Oil | Water / Air / Steam / Gas / Oil | Water / Air / Steam / Gas / Oil | Water / Air / Steam / Gas / Oil | Water / Air / Steam / Gas / Oil | Water / Air / Steam / Gas / Oil | Air | Air | Air | Air | Air | Air | Air | Air | Water / Air / Steam / Gas / Oil | Water / Air / Steam / Gas / Oil |
| Type | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting |
| Max. Operating Pressure(MPa) | 2.5 | 12 | 12 | 12 | 13.8 | 6.9 | 3.5 ~ 6 | 20 | 6.9 | 6.9 | 12 | 2.5 | 2.5 | 2.5 | 2.5 | 2.5 | 2.5 | 2.5 | 2.5 | 2.5 | 2.5 | 2.5 | 2.5 | 2.5 | 2.5 | 2.5 | 2.5 | 2.5 | 2.5 | 2.5 | 13.8 | 13.8 | 13.8 | 13.8 | 13.8 | 21 | 21 | 21 | 21 | 21 | 21 | 21 | 7 | 2.5 | 2.5 |
| Surface Treatment | Not Provided / Zinc Plating / Resin Coating | Not Provided | Not Provided | Not Provided | Resin Coating | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided / Zinc Plating | Not Provided / Zinc Plating | Not Provided / Zinc Plating | Zinc Plating | Not Provided / Zinc Plating | Not Provided / Zinc Plating | Not Provided / Zinc Plating | Zinc Plating | Not Provided / Zinc Plating | Not Provided / Zinc Plating | Not Provided / Zinc Plating | Not Provided / Zinc Plating | Not Provided / Zinc Plating | Not Provided / Zinc Plating | Not Provided / Zinc Plating | Not Provided / Zinc Plating | Not Provided / Zinc Plating | Not Provided / Zinc Plating | Not Provided / Zinc Plating | Zinc Plating | Zinc Plating | Zinc Plating | Zinc Plating | Zinc Plating | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Zinc Plating | Zinc Plating |
| Types of Screw 3 (When Different Dia. or Different Type Screw) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Rc | Rc | - | - | - | - | - | - | - | - | - | - | Rc | - | - | - | - | - | - | - | - | Rc | - | - | - | Rc | Rc |
| Nominal of Thread 3(Different Diameters or Different Type Screw) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1 1/2B(40A) ~ 4B(100A) | 1 1/2B(40A) ~ 3B(80A) | - | - | - | - | - | - | - | - | - | - | 1 1/2B(40A) ~ 5B(125A) | - | - | - | - | - | - | - | - | 1/4B(8A) ~ 3/8B(10A) | - | - | - | 1B(25A) ~ 3/4B(20A) | 1 1/2B(40A) ~ 3/8B(10A) |
| Types of Screw 4 (When Different Dia. or Different Type Screw) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Rc | - |
| Nominal of Thread 4(Different Diameters or Different Type Screw) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1B(25A) ~ 3/4B(20A) | - |
| Material Details | - | - | - | - | - | - | - | - | C3771 | C3771 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Divisions of Max. Operating Pressure | than 2.0Mpa | than 2.0Mpa | than 2.0Mpa | than 2.0Mpa | than 2.0Mpa | than 2.0Mpa | than 2.0Mpa | than 2.0Mpa | than 2.0Mpa | than 2.0Mpa | than 2.0Mpa | than 2.0Mpa | than 2.0Mpa | than 2.0Mpa | than 2.0Mpa | than 2.0Mpa | than 2.0Mpa | than 2.0Mpa | than 2.0Mpa | than 2.0Mpa | than 2.0Mpa | than 2.0Mpa | than 2.0Mpa | than 2.0Mpa | than 2.0Mpa | than 2.0Mpa | than 2.0Mpa | than 2.0Mpa | than 2.0Mpa | than 2.0Mpa | than 2.0Mpa | than 2.0Mpa | than 2.0Mpa | than 2.0Mpa | than 2.0Mpa | than 2.0Mpa | than 2.0Mpa | than 2.0Mpa | than 2.0Mpa | than 2.0Mpa | than 2.0Mpa | than 2.0Mpa | than 2.0Mpa | than 2.0Mpa | than 2.0Mpa |
| Related Part Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Interior Resin Lining | No | No | No | No | No | No | No | No | No | No | No | No | No | No | No | No | No | No | No | No | No | No | No | No | No | No | No | No | No | No | No | No | No | No | No | No | No | No | No | No | No | No | No | No | No |
Loading...
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy