(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Screw Fittings, Screw-In Type Flanges（Nominal of Thread M1：4B(100A) Page7）
| Days to Ship |
|
|---|
-
20 K Fittings with Outer Coating for Pressure Piping - Socket
CK_KINZOKU
Buried joint for pressure piping.
[Features]
·The socket sleeve is made long and completely wraps around the tube sheath. The gap between the pipe and joint is sealed with a special rubber ring or caulking tape to prevent water from entering and to insulate electrically.
·There is no need to worry about corrosion even when buried in salty soil, soil or concrete where local batteries are likely to occur, or where there is a lot of stray current.
·There is no need to wrap caulking tape around the body of the fitting or where it connects to the pipe, which speeds up the installation of pipes.
·Since vinyl chloride is not used in the resin, it can be recycled together with iron without separation.
·Certified by the Japan Fire Equipment Safety Center.
[Applications]
·For extension of buried pressure piping.Standard Price: MYR 1,005.41 Days to Ship: 13 Day(s) or more -
Pressure Pipe Exterior Cladding 20K Fitting 45° Elbow
CK_KINZOKU
Buried joint for pressure piping.
[Features]
·Since vinyl chloride is not used in the outer resin, it can be recycled together with iron without separation.
·Certified by the Japan Fire Equipment Safety Center.
[Applications]
·For 45° bends in STPG VS pipes.Standard Price: MYR 2,216.88 Days to Ship: 13 Day(s) or more -
20 K Fittings with Outer Coating for Pressure Piping - Unequal Diameter Elbow
CK_KINZOKU
Buried joint for pressure piping.
[Features]
·Vinyl chloride is not used in the outer resin, so it can be recycled together with iron without separation.
·Certified by the Japan Fire Equipment Safety Center.
[Applications]
·For changing the bend size of STPG VS pipes.Standard Price: MYR 1,902.04 Days to Ship: 13 Day(s) or more -
Pressure Pipe Exterior Cladding 20 K Fitting Tee with Different Diameters
CK_KINZOKU
Buried joint for pressure piping.
[Features]
·Vinyl chloride is not used in the outer resin, so it can be recycled together with iron without separation.
·Certified by the Japan Fire Equipment Safety Center.
[Applications]
·For removing branches from STPG VS pipes.Standard Price: MYR 3,317.09- Days to Ship: 13 Day(s) or more -
20 K Fittings with Outer Coating for Pressure Piping - Reducing Socket
CK_KINZOKU
Buried joint for pressure piping.
[Features]
·Since vinyl chloride is not used in the outer resin, it can be recycled together with iron without separation.
·Certified by the Japan Fire Equipment Safety Center.
[Applications]
·For size conversion of STPG VS pipe piping.Standard Price: MYR 939.10 Days to Ship: 13 Day(s) or more -
20 K Transparent Fittings with Insulation for HB Gold (HBG) Fire Extinguishing Pipes - Elbow
CK_KINZOKU
Buried joint for fire extinguishing piping.
[Features]
·Attachment of the rubber ring can be easily confirmed.
·Correct construction is possible by managing extra screws.
·Listed in the Ministry of Land, Infrastructure, Transport and Tourism Machinery and Equipment Construction Management Guidelines.
· Made in Japan.
·GOOD DESIGN award winning product.
[Applications]
·For bends in STPG VS pipes.Standard Price: MYR 1,760.32 Days to Ship: 13 Day(s) or more -
20 K Transparent Fittings with Insulation for HB Gold (HBG) Fire Extinguishing Pipes - Tee
CK_KINZOKU
Buried joint for fire extinguishing piping.
[Features]
·Attachment of the rubber ring can be easily confirmed.
·Correct construction is possible by managing extra screws.
·Listed in the Ministry of Land, Infrastructure, Transport and Tourism Machinery and Equipment Construction Management Guidelines.
· Made in Japan.
[Applications]
·For removing branches from STPG VS pipes.Standard Price: MYR 2,942.13 Days to Ship: 13 Day(s) or more -
20 K Transparent Fittings with Insulation for HB Gold (HBG) Fire Extinguishing Pipes - Socket
CK_KINZOKU
Buried joint for fire extinguishing piping.
[Features]
·Attachment of the rubber ring can be easily confirmed.
·Correct construction is possible by managing extra screws.
·Listed in the Ministry of Land, Infrastructure, Transport and Tourism Machinery and Equipment Construction Management Guidelines.
· Made in Japan.
·GOOD DESIGN award winning product.
[Applications]
·For changing the size of STPG VS pipes.Standard Price: MYR 1,005.41 Days to Ship: 13 Day(s) or more -
CK_KINZOKU
Buried joint for fire extinguishing piping.
[Features]
·Attachment of the rubber ring can be easily confirmed.
·Correct construction is possible by managing extra screws.
·Listed in the Ministry of Land, Infrastructure, Transport and Tourism Machinery and Equipment Construction Management Guidelines.
· Made in Japan.
·GOOD DESIGN award winning product.
[Applications]
·For size conversion of STPG VS pipe piping.Standard Price: MYR 939.10 Days to Ship: 13 Day(s) or more -
Ck Fitting Threaded Transportable Cast Iron Pipe Fittings 45° Elbow
CK_KINZOKU
JIS standard (B2301 screw-in type malleable cast iron pipe fittings) correct fittings.
[Features]
·Conforms to JIS standards.
·The appearance is exactly the same as the conventional product.
· Made in Japan.
[Applications]
·For 45° bends in white piping.Standard Price: MYR 322.86- Days to Ship: 7 Day(s) or more -
Ck Fitting Threaded Transportable Cast Iron Pipe Fittings T
CK_KINZOKU
JIS standard (B2301 screw-in type malleable cast iron pipe fittings) correct fittings.
[Features]
·Conforms to JIS standards.
·The appearance is exactly the same as the conventional product.
· Made in Japan.
[Applications]
·For removing branches from white pipes.Standard Price: MYR 322.86- Days to Ship: 7 Day(s) or more -
CK Fittings Threaded From Malleable Iron Pipe Fitting Cross
CK_KINZOKU
JIS standard (B2301 screw-in type malleable cast iron pipe fittings) correct threaded fittings.
[Features]
·The appearance is exactly the same as the conventional product.
· Made in Japan.
[Applications]
·Ideal for branching white pipes in four directions.Standard Price: MYR 684.45- Days to Ship: 7 Day(s) or more -
CK Fittings, Screw-in Malleable Cast Iron Pipe Fittings, Cross
CK_KINZOKU
JIS standard (B2301 screw-in type malleable cast iron pipe fittings) correct fittings.
[Features]
· Made in Japan.
[Applications]
·For extension of white piping.Standard Price: MYR 175.09- Days to Ship: 7 Day(s) or more -
CK Fittings - Screw-in Type Malleable Cast Iron Pipe Fitting - Union
CK_KINZOKU
JIS standard (B2301 screw-in type malleable cast iron pipe fittings) correct fittings.
[Features]
· Made in Japan.
[Applications]
·When removing the white pipe.Standard Price: MYR 725.42- Days to Ship: 7 Day(s) or more -
CK Fittings - Screw-in Type Malleable Cast Iron Pipe Fitting - Flange Union
CK_KINZOKU
JIS standard (B2301 screw-in type malleable cast iron pipe fittings) correct fittings.
[Features]
·Conforms to JIS standards.
·The appearance is exactly the same as the conventional product.
· Made in Japan.
[Applications]
·For flange connections of white pipes.Standard Price: MYR 489.64- Days to Ship: 13 Day(s) or more -
CK Fittings - Screw-in Type Malleable Cast Iron Pipe Fitting - Unequal Diameter Elbow
CK_KINZOKU
JIS standard (B2301 screw-in type malleable cast iron pipe fittings) correct fittings.
[Features]
·Conforms to JIS standards.
·The appearance is exactly the same as the conventional product.
· Made in Japan.
[Applications]
·For changing the size of bends in white piping.Standard Price: MYR 453.57- Days to Ship: 7 Day(s) or more -
CK_KINZOKU
JIS standard (B2301 screw-in type malleable cast iron pipe fittings) correct threaded fittings.
[Features]
· Made in Japan.
[Applications]
·Ideal for removing branches from white pipes.Standard Price: MYR 458.62- Days to Ship: 7 Day(s) or more -
CK Fittings - Screw-in Type Malleable Cast Iron Pipe Fitting - Socket with Different Diameters
CK_KINZOKU
JIS standard (B2301 screw-in type malleable cast iron pipe fittings) correct threaded fittings.
[Features]
· Made in Japan.
[Applications]
·Ideal for size conversion of white piping.Standard Price: MYR 222.62- Days to Ship: 7 Day(s) or more -
Ck Fitting Threaded Transportable Cast Iron Pipe Fittings Bushing
CK_KINZOKU
JIS standard (B2301 screw-in type malleable cast iron pipe fittings) correct threaded fittings.
[Features]
· Made in Japan.
[Applications]
·Ideal for changing the female thread size of white piping.Standard Price: MYR 207.28- Days to Ship: 7 Day(s) or more -
CK_KINZOKU
JIS standard (B2301 screw-in type malleable cast iron pipe fittings) correct threaded fittings.
[Features]
· Made in Japan.
[Applications]
·Ideal for 90° bends in white piping.Standard Price: MYR 429.85- Days to Ship: 7 Day(s) or more -
CK Fittings - Screw-in Type Malleable Cast Iron Pipe Fitting - Cap
CK_KINZOKU
JIS standard (B2301 screw-in type malleable cast iron pipe fittings) correct fittings.
[Features]
· Made in Japan.
[Applications]
·Ideal for the male thread end of white piping.Standard Price: MYR 204.75- Days to Ship: 7 Day(s) or more -
Ck Fitting Threaded Transportable Cast Iron Pipe Fittings Plug
CK_KINZOKU
JIS standard (B2301 screw-in type malleable cast iron pipe fittings) correct threaded fittings.
[Features]
· Made in Japan.
[Applications]
·Ideal for ends to threaded fittings of white piping.Standard Price: MYR 129.04- Days to Ship: 7 Day(s) or more -
CK Fittings - Screw-in Type Malleable Cast Iron Pipe Fitting - Nipple
CK_KINZOKU
JIS standard (B2301 screw-in type malleable cast iron pipe fittings) correct threaded fittings.
[Features]
· Made in Japan.
[Applications]
·Ideal for connecting joints of white piping.Standard Price: MYR 167.44- Days to Ship: 7 Day(s) or more -
CK Cast-Iron Mating Companion Flange 5K Flange
CK_KINZOKU
[Features]
・ 5K Threaded Type Flange (JIS B 2239 compliant or compliant)
・ The material is black-heart malleable cast iron or ductile cast iron, which is 1.5 times stronger than gray cast iron and tough
・ Since thread cutting is performed by a strictly controlled machine, the thread axis, angle, thread shape, and thread fitting are all correct threaded-type flanges that comply with JIS standards
・ CK cast iron compound flange is strictly checked at each point of the manufacturing process such as material inspection, model inspection, raw material inspection, product inspection, so you can use it with confidence as a flange with stable quality
[Applications]
・ Ideal for threaded flange connectionStandard Price: MYR 98.92- Days to Ship: 7 Day(s) or more -
CK Cast Iron Flange, 10K Flange
CK_KINZOKU
[Features]
・ 10K Threaded Type Flange (JIS B 2239 compliant)
・ The material is black-heart malleable cast iron or ductile cast iron, which is 1.5 times stronger than gray cast iron and tough
・ Since thread cutting is performed by a strictly controlled machine, the thread axis, angle, thread shape, and thread fitting are all correct threaded-type flanges that comply with JIS standards
・ CK cast iron compound flange is strictly checked at each point of the manufacturing process such as material inspection, model inspection, raw material inspection, product inspection, so you can use it with confidence as a flange with stable quality
[Applications]
・ Ideal for threaded flange connectionStandard Price: MYR 110.31- Days to Ship: 7 Day(s) or more -
CK Fittings, Threaded Malleable Cast Iron Pipe Fittings, Reducing T
CK_KINZOKU
JIS standard (B2301 screw-in type malleable cast iron pipe fittings) correct threaded fittings.
[Features]
· Made in Japan.
[Applications]
·Ideal for branching white piping.Standard Price: MYR 506.94- Days to Ship: 7 Day(s) or more -
Exterior Transparent Insulation for Fire Extinguishing Pipes 10K Fitting VF Gold Elbow
CK_KINZOKU
Buried joint for fire extinguishing piping.
[Features]
·Attachment of the rubber ring can be easily confirmed.
·Correct construction is possible by managing extra screws.
·Listed in the Ministry of Land, Infrastructure, Transport and Tourism Machinery and Equipment Construction Management Guidelines.
· Made in Japan.
·GOOD DESIGN award winning product.
[Applications]
·For VS pipe bends.Standard Price: MYR 411.64 Days to Ship: 13 Day(s) or more -
External Surface Transparent Coating for Fire Protection Piping 10 K Fittings, VF Gold, Socket
CK_KINZOKU
Buried joint for fire extinguishing piping.
[Features]
·The attachment of the rubber ring can be easily checked.
·When used in combination with a transparent seal ring, correct construction can be performed by controlling excess threads.
·The wrench can be securely attached to the joint body.
·Listed in the Ministry of Land, Infrastructure, Transport and Tourism Machinery and Equipment Construction Management Guidelines.
· Made in Japan.
·GOOD DESIGN award winning product.
[Applications]
·For extension of VS piping.Standard Price: MYR 318.54 Days to Ship: 13 Day(s) or more -
Fire Extinguishing Pipes for Exterior Transparent Insulation 10 K Fittings Gold VF 45° Elbow
CK_KINZOKU
Buried joint for fire extinguishing piping.
[Features]
·Attachment of the rubber ring can be easily confirmed.
·Correct construction is possible by managing extra screws.
·Listed in the Ministry of Land, Infrastructure, Transport and Tourism Machinery and Equipment Construction Management Guidelines.
· Made in Japan.
·GOOD DESIGN award winning product.
[Applications]
·For 45° bending of VS piping.Standard Price: MYR 547.18 Days to Ship: 13 Day(s) or more -
CK_KINZOKU
Buried joint for fire extinguishing piping.
[Features]
·Attachment of the rubber ring can be easily confirmed.
·Correct construction is possible by managing extra screws.
·Listed in the Ministry of Land, Infrastructure, Transport and Tourism Machinery and Equipment Construction Management Guidelines.
· Made in Japan.
·GOOD DESIGN award winning product.
[Applications]
·For changing the size of bends in VS pipes.Standard Price: MYR 849.03 Days to Ship: 13 Day(s) or more -
CK_KINZOKU
Buried joint for fire extinguishing piping.
[Features]
·Attachment of the rubber ring can be easily confirmed.
·Correct construction is possible by managing extra screws.
·Listed in the Ministry of Land, Infrastructure, Transport and Tourism Machinery and Equipment Construction Management Guidelines.
· Made in Japan.
·GOOD DESIGN award winning product.
[Applications]
·For removing VS piping branches.Standard Price: MYR 883.87 Days to Ship: 13 Day(s) or more -
CK_KINZOKU
Buried joint for fire extinguishing piping.
[Features]
·Attachment of the rubber ring can be easily confirmed.
·Correct construction is possible by managing extra screws.
·Listed in the Ministry of Land, Infrastructure, Transport and Tourism Machinery and Equipment Construction Management Guidelines.
· Made in Japan.
·GOOD DESIGN award winning product.
[Applications]
·For size conversion of VS piping.Standard Price: MYR 472.55 Days to Ship: 13 Day(s) or more -
Stainless Steel Screw-In Tube Fitting, Straight Half Socket
JFEPIPEFITTING
Excellent quality, high corrosion resistance stainless steel threaded pipe fittings.
[Features]
・ No elution of harmful substances, safe and hygienic, no worry about red and blue water
・ It has excellent corrosion resistance and can be expected to have a semi-permanent lifespan
・ It can be recycled
[Applications]
・ General piping for steam, air, gas, water, oil, etc.
・ Available widely in the field of pulp petrochemical, electric power, textiles, foods, chemicals, water treatment, semiconductors, chemical industrial machinery, pollution control equipment, shipbuilding, vehicles, etc.Standard Price: MYR 274.21 Days to Ship: 8 Day(s) or more -
Screw-In PL Fitting, 45° Elbow
JFEPIPEFITTING
[Features]
• JFE pipe fittings are produced at cutting-edge facilities with thorough quality control.
• Moreover, ring stamp PL fittings are coat-baked with powder epoxy resin on the inner and outer surfaces, excluding screws, using a special coating method, providing enhanced adhesiveness, corrosion resistance, etc.
• Can be used with a high level of reliability.Days to Ship: 19 Day(s) or more -
JFEPIPEFITTING
[Features]
・ RING Brand fittings are products produced with state-of-the-art equipment and thorough quality control
・ The RING Brand PL fitting has a powder epoxy resin coated on its inner and outer surfaces by a special coating method, excluding the threaded section, and has excellent adhesion, corrosion resistance, etc.
・ Both products are safe to useDays to Ship: 17 Day(s) or more -
JFEPIPEFITTING
[Features]
• JFE pipe fittings are produced at cutting-edge facilities with thorough quality control.
• Moreover, ring stamp PL fittings are coat-baked with powder epoxy resin on the inner and outer surfaces, excluding screws, using a special coating method, providing enhanced adhesiveness, corrosion resistance, etc.
• Can be used with a high level of reliability.Days to Ship: 17 Day(s) or more -
JFEPIPEFITTING
A variety of JIS standard fittings and tubing parts are available. The threaded crosses are the PL fittings manufactured by JFE Pipe Fitting Mfg. Co., Ltd., which has a proven track record in Japan.
· Materials: Cast iron
· Applicable fluids: water and air.
· Surface treatment: epoxy resin.Days to Ship: 19 Day(s) or more -
JFEPIPEFITTING
[Features]
• JFE pipe fittings are produced at cutting-edge facilities with thorough quality control.
• Moreover, ring stamp PL fittings are coat-baked with powder epoxy resin on the inner and outer surfaces, excluding screws, using a special coating method, providing enhanced adhesiveness, corrosion resistance, etc.
• Can be used with a high level of reliability.Days to Ship: 17 Day(s) or more -
JFEPIPEFITTING
[Features]
• JFE pipe fittings are produced at cutting-edge facilities with thorough quality control.
• Moreover, ring stamp PL fittings are coat-baked with powder epoxy resin on the inner and outer surfaces, excluding screws, using a special coating method, providing enhanced adhesiveness, corrosion resistance, etc.
• Can be used with a high level of reliability.Days to Ship: 19 Day(s) or more -
JFEPIPEFITTING
[Features]
・ RING Brand fittings are products produced with state-of-the-art equipment and thorough quality control
・ The RING Brand PL fitting has a powder epoxy resin coated on its inner and outer surfaces by a special coating method, excluding the threaded section, and has excellent adhesion, corrosion resistance, etc.
・ Both products are safe to useDays to Ship: 12 Day(s) or more -
JFEPIPEFITTING
[Features]
・ RING Brand fittings are products produced with state-of-the-art equipment and thorough quality control
・ The RING Brand PL fitting has a powder epoxy resin coated on its inner and outer surfaces by a special coating method, excluding the threaded section, and has excellent adhesion, corrosion resistance, etc.
・ Both products are safe to useDays to Ship: 16 Day(s) or more -
Screw-In PL Fitting Union (Standard)
JFEPIPEFITTING
[Features]
・ RING Brand fittings are products produced with state-of-the-art equipment and thorough quality control
・ The RING Brand PL fitting has a powder epoxy resin coated on its inner and outer surfaces by a special coating method, excluding the threaded section, and has excellent adhesion, corrosion resistance, etc.
・ Both products are safe to useDays to Ship: 19 Day(s) or more -
Screw-In PL Fitting, 45° Elbow with Collar
JFEPIPEFITTING
[Features]
• JFE pipe fittings are produced at cutting-edge facilities with thorough quality control.
• Moreover, ring stamp PL fittings are coat-baked with powder epoxy resin on the inner and outer surfaces, excluding screws, using a special coating method, providing enhanced adhesiveness, corrosion resistance, etc.
• Can be used with a high level of reliability.Days to Ship: 89 Day(s) or more -
Cap with Screw-In PL Fitting Edge
JFEPIPEFITTING
A variety of JIS standard fittings and tubing parts are available. The cap with a rim is a threaded PL fitting manufactured by JFE Pipe Fitting Mfg. Co., Ltd., which has a proven track record in Japan.
· Materials: Cast iron
· Applicable fluids: water and air.
· Surface treatment: epoxy resin.Days to Ship: 9 Day(s) or more -
Screw-In PL Fitting, Cross with Collar
JFEPIPEFITTING
[Features]
• JFE pipe fittings are produced at cutting-edge facilities with thorough quality control.
• Moreover, ring stamp PL fittings are coat-baked with powder epoxy resin on the inner and outer surfaces, excluding screws, using a special coating method, providing enhanced adhesiveness, corrosion resistance, etc.
• Can be used with a high level of reliability.Days to Ship: 19 Day(s) or more
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Connecting Shape |
| Environmentally Friendly |
| Connection Type |
| Properties / applications |
| Material |
| Nominal of Thread M1 |
| Connection Thread Type M1 |
| Connection Thread Type M2 |
| Nominal of Thread M2 |
| Applicable Fluid |
| Type |
| Max. Operating Pressure(MPa) |
| Surface Treatment |
| Types of Screw 3 (When Different Dia. or Different Type Screw) |
| Nominal of Thread 3(Different Diameters or Different Type Screw) |
| Types of Screw 4 (When Different Dia. or Different Type Screw) |
| Nominal of Thread 4(Different Diameters or Different Type Screw) |
| Material Details |
| Divisions of Max. Operating Pressure |
| Related Part Type |
| Interior Resin Lining |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | CK_KINZOKU | CK_KINZOKU | CK_KINZOKU | CK_KINZOKU | CK_KINZOKU | CK_KINZOKU | CK_KINZOKU | CK_KINZOKU | CK_KINZOKU | CK_KINZOKU | CK_KINZOKU | CK_KINZOKU | CK_KINZOKU | CK_KINZOKU | CK_KINZOKU | CK_KINZOKU | CK_KINZOKU | CK_KINZOKU | CK_KINZOKU | CK_KINZOKU | CK_KINZOKU | CK_KINZOKU | CK_KINZOKU | CK_KINZOKU | CK_KINZOKU | CK_KINZOKU | CK_KINZOKU | CK_KINZOKU | CK_KINZOKU | CK_KINZOKU | CK_KINZOKU | CK_KINZOKU | JFEPIPEFITTING | JFEPIPEFITTING | JFEPIPEFITTING | JFEPIPEFITTING | JFEPIPEFITTING | JFEPIPEFITTING | JFEPIPEFITTING | JFEPIPEFITTING | JFEPIPEFITTING | JFEPIPEFITTING | JFEPIPEFITTING | JFEPIPEFITTING | JFEPIPEFITTING |
| Product Series | 20 K Fittings with Outer Coating for Pressure Piping - Socket | 20 K Fittings with Outer Coating for Pressure Piping - Unequal Diameter Elbow | Pressure Pipe Exterior Cladding 20 K Fitting Tee with Different Diameters | 20 K Fittings with Outer Coating for Pressure Piping - Reducing Socket | 20 K Transparent Fittings with Insulation for HB Gold (HBG) Fire Extinguishing Pipes - Elbow | 20 K Transparent Fittings with Insulation for HB Gold (HBG) Fire Extinguishing Pipes - Tee | 20 K Transparent Fittings with Insulation for HB Gold (HBG) Fire Extinguishing Pipes - Socket | Ck Fitting Threaded Transportable Cast Iron Pipe Fittings 45° Elbow | CK Fittings, Screw-in Malleable Cast Iron Pipe Fittings, Cross | CK Fittings - Screw-in Type Malleable Cast Iron Pipe Fitting - Union | CK Fittings - Screw-in Type Malleable Cast Iron Pipe Fitting - Flange Union | CK Fittings - Screw-in Type Malleable Cast Iron Pipe Fitting - Unequal Diameter Elbow | CK Fittings - Screw-in Type Malleable Cast Iron Pipe Fitting - Socket with Different Diameters | Ck Fitting Threaded Transportable Cast Iron Pipe Fittings Bushing | CK Fittings - Screw-in Type Malleable Cast Iron Pipe Fitting - Cap | Ck Fitting Threaded Transportable Cast Iron Pipe Fittings Plug | CK Fittings - Screw-in Type Malleable Cast Iron Pipe Fitting - Nipple | CK Fittings, Threaded Malleable Cast Iron Pipe Fittings, Reducing T | Exterior Transparent Insulation for Fire Extinguishing Pipes 10K Fitting VF Gold Elbow | External Surface Transparent Coating for Fire Protection Piping 10 K Fittings, VF Gold, Socket | Fire Extinguishing Pipes for Exterior Transparent Insulation 10 K Fittings Gold VF 45° Elbow | ||||||||||||||||||||||||
| CAD | |||||||||||||||||||||||||||||||||||||||||||||
| Days to Ship | 13 Day(s) or more | 13 Day(s) or more | 13 Day(s) or more | 13 Day(s) or more | 13 Day(s) or more | 13 Day(s) or more | 13 Day(s) or more | 13 Day(s) or more | 13 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 13 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 13 Day(s) or more | 13 Day(s) or more | 13 Day(s) or more | 13 Day(s) or more | 13 Day(s) or more | 13 Day(s) or more | 8 Day(s) or more | 19 Day(s) or more | 17 Day(s) or more | 17 Day(s) or more | 19 Day(s) or more | 17 Day(s) or more | 19 Day(s) or more | 12 Day(s) or more | 16 Day(s) or more | 19 Day(s) or more | 89 Day(s) or more | 9 Day(s) or more | 19 Day(s) or more |
| Connecting Shape | Socket | Elbow | Elbow | Tees | Socket | Elbow | Tees | Socket | Socket | Elbow | Tees | Cross | Socket | Male, Female Union | Flange | Elbow | Tees | Socket | Bushings/Male Female Socket | Street Elbow | Cap | Plug | Nipple | Flange | Flange | Tees | Elbow | Socket | Elbow | Elbow | Tees | Socket | Socket | Elbow | Elbow | Cap | Cross | Socket | Tees | Bushings/Male Female Socket | Plug | Male, Female Union | Elbow | Cap | Cross |
| Environmentally Friendly | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Connection Type | Thread <-> Thread, Equal Dia. Same Type | Thread <-> Thread, Equal Dia. Same Type | Thread <-> Thread, Unequal Dia. | Thread <-> Thread, Unequal Dia. | Thread <-> Thread, Unequal Dia. | Thread <-> Thread, Equal Dia. Same Type | Thread <-> Thread, Equal Dia. Same Type | Thread <-> Thread, Equal Dia. Same Type | Thread <-> Thread, Unequal Dia. | Thread <-> Thread, Equal Dia. Same Type | Thread <-> Thread, Equal Dia. Same Type | Thread <-> Thread, Equal Dia. Same Type | Thread <-> Thread, Equal Dia. Same Type | Thread <-> Thread, Equal Dia. Same Type | Flange | Thread <-> Thread, Unequal Dia. | Thread <-> Thread, Unequal Dia. | Thread <-> Thread, Unequal Dia. | Thread <-> Thread, Unequal Dia. | Thread <-> Thread, Equal Dia. Same Type | Screws | Screws | Thread <-> Thread, Equal Dia. Same Type | Flange | Flange | Thread <-> Thread, Unequal Dia. | Thread <-> Thread, Equal Dia. Same Type | Thread <-> Thread, Equal Dia. Same Type | Thread <-> Thread, Equal Dia. Same Type | Thread <-> Thread, Unequal Dia. | Thread <-> Thread, Unequal Dia. | Thread <-> Thread, Unequal Dia. | Thread <-> Thread, Equal Dia. Same Type | Thread <-> Thread, Equal Dia. Same Type | Thread <-> Thread, Equal Dia. Same Type | Screws | Thread <-> Thread, Equal Dia. Same Type | Thread <-> Thread, Equal Dia. Same Type | Thread <-> Thread, Equal Dia. Same Type | Thread <-> Thread, Unequal Dia. | Screws | Thread <-> Thread, Equal Dia. Same Type | Thread <-> Thread, Equal Dia. Same Type | Screws | Thread <-> Thread, Equal Dia. Same Type |
| Properties / applications | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Material | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Stainless Steel | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron |
| Nominal of Thread M1 | 4B(100A) | 4B(100A) | 4B(100A) | 4B(100A) | 4B(100A) | 4B(100A) | 4B(100A) | 4B(100A) | 4B(100A) | 4B(100A) | 4B(100A) | 4B(100A) | 4B(100A) | 4B(100A) | 4B(100A) | 4B(100A) | 4B(100A) | 4B(100A) | 4B(100A) | 4B(100A) | 4B(100A) | 4B(100A) | 4B(100A) | 4B(100A) | 4B(100A) | 4B(100A) | 4B(100A) | 4B(100A) | 4B(100A) | 4B(100A) | 4B(100A) | 4B(100A) | 4B(100A) | 4B(100A) | 4B(100A) | 4B(100A) | 4B(100A) | 4B(100A) | 4B(100A) | 4B(100A) | 4B(100A) | 4B(100A) | 4B(100A) | 4B(100A) | 4B(100A) |
| Connection Thread Type M1 | Rc | Rc | Rc | Rc | Rc | Rc | Rc | Rc | Rc | Rc | Rc | Rc | Rc | Rc | Rc | Rc | Rc | Rc | R | Rc | Rc | R | R | Rc | Rc | Rc | Rc | Rc | Rc | Rc | Rc | Rc | Rc | Rc | Rc | Rc | Rc | Rc | Rc | Rc | R | Rc | Rc | Rc | Rc |
| Connection Thread Type M2 | - | - | - | Rc | Rc | - | - | - | Rc | - | - | - | - | - | - | - | Rc | Rc | Rc | R | - | - | - | - | - | Rc | - | - | - | - | Rc | Rc | - | - | - | - | - | - | - | R | - | - | - | - | - |
| Nominal of Thread M2 | - | - | 2 1/2B(65A) | 1B(25A) / 2 1/2B(65A) | 2 1/2B(65A) | - | - | - | 2 1/2B(65A) | - | - | - | - | - | - | 2B(50A) / 2 1/2B(65A) / 3B(80A) | 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) / 2 1/2B(65A) / 3B(80A) | 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) / 2 1/2B(65A) / 3B(80A) | 3/4B(20A) / 1 1/2B(40A) / 2B(50A) / 2 1/2B(65A) / 3B(80A) | 4B(100A) | - | - | - | - | - | 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) / 2 1/2B(65A) / 3B(80A) | - | - | - | 3B(80A) | 1B(25A) / 2B(50A) / 2 1/2B(65A) / 3B(80A) | 3B(80A) | - | - | - | - | - | - | - | 5B(125A) / 6B(150A) | - | - | - | - | - |
| Applicable Fluid | Water / Air / Gas / Oil | Water / Air / Gas / Oil | Water / Air / Gas / Oil | Water / Air / Gas / Oil | Water / Air / Gas / Oil | Water / Air / Gas / Oil | Water / Air / Gas / Oil | Water / Air / Gas / Oil | Water / Air / Gas / Oil | Water / Air / Steam / Gas / Oil | Water / Air / Steam / Gas / Oil | Water / Air / Steam / Gas / Oil | Water / Air / Steam / Gas / Oil | Water / Air / Steam / Gas / Oil | Water / Air / Steam / Gas / Oil | Water / Air / Steam / Gas / Oil | Water / Air / Gas / Oil | Water / Air / Steam / Gas / Oil | Water / Air / Steam / Gas / Oil | Water / Air / Steam / Gas / Oil | Water / Air / Steam / Gas / Oil | Water / Air / Steam / Gas / Oil | Water / Air / Steam / Gas / Oil | Water / Air / Steam / Gas / Oil | Water / Air / Steam / Gas / Oil | Water / Air / Steam / Gas / Oil | Water | Water | Water | Water | Water | Water | Water / Air / Steam / Gas / Chemical / Oil | Water / Air | Water / Air | Water / Air | Water / Air | Water / Air | Water / Air | Water / Air | Water / Air | Water / Air | Water / Air | Water / Air | Water / Air |
| Type | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting |
| Max. Operating Pressure(MPa) | 13.8 | 13.8 | 13.8 | 13.8 | 13.8 | 13.8 | 13.8 | 13.8 | 13.8 | 2.5 | 2.5 | 2.5 | 2.5 | 2.5 | 2.5 | 2.5 | 2.5 | 2.5 | 2.5 | 2.5 | 2.5 | 2.5 | 2.5 | 1 | 1 | 2.5 | - | - | - | - | - | - | 2 | 2.5 | 2.5 | 2.5 | 2.5 | 2.5 | 2.5 | 2.5 | 2.5 | 2.5 | 2.5 | 2.5 | 2.5 |
| Surface Treatment | Resin Coating | Resin Coating | Resin Coating | Resin Coating | Resin Coating | Resin Coating | Resin Coating | Resin Coating | Resin Coating | Not Provided / Zinc Plating / Resin Coating | Not Provided / Zinc Plating / Resin Coating | Not Provided / Zinc Plating / Resin Coating | Not Provided / Zinc Plating / Resin Coating | Not Provided / Zinc Plating / Resin Coating | Not Provided / Zinc Plating / Resin Coating | Not Provided / Zinc Plating / Resin Coating | Zinc Plating / Resin Coating | Not Provided / Zinc Plating / Resin Coating | Not Provided / Zinc Plating / Resin Coating | Not Provided / Zinc Plating | Not Provided / Zinc Plating / Resin Coating | Not Provided / Zinc Plating / Resin Coating | Not Provided / Zinc Plating / Resin Coating | Not Provided / Zinc Plating / Resin Coating | Not Provided / Zinc Plating / Resin Coating | Not Provided | Resin Coating | Resin Coating | Resin Coating | Resin Coating | Resin Coating | Resin Coating | Not Provided | Resin Coating | Resin Coating | Resin Coating | Resin Coating | Resin Coating | Resin Coating | Resin Coating | Resin Coating | Resin Coating | Resin Coating | Resin Coating | Resin Coating |
| Types of Screw 3 (When Different Dia. or Different Type Screw) | - | - | - | Rc | - | - | - | - | - | - | - | - | - | - | - | - | Rc | - | - | - | - | - | - | - | - | Rc | - | - | - | - | Rc | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Nominal of Thread 3(Different Diameters or Different Type Screw) | - | - | - | 4B(100A) | - | - | - | - | - | - | - | - | - | - | - | - | 4B(100A) | - | - | - | - | - | - | - | - | 4B(100A) | - | - | - | - | 4B(100A) | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Types of Screw 4 (When Different Dia. or Different Type Screw) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Nominal of Thread 4(Different Diameters or Different Type Screw) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Material Details | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Divisions of Max. Operating Pressure | than 2.0Mpa | than 2.0Mpa | than 2.0Mpa | than 2.0Mpa | than 2.0Mpa | than 2.0Mpa | than 2.0Mpa | than 2.0Mpa | than 2.0Mpa | than 2.0Mpa | than 2.0Mpa | than 2.0Mpa | than 2.0Mpa | than 2.0Mpa | than 2.0Mpa | than 2.0Mpa | than 2.0Mpa | than 2.0Mpa | than 2.0Mpa | than 2.0Mpa | than 2.0Mpa | than 2.0Mpa | than 2.0Mpa | 1.0Mpa or Less | 1.0Mpa or Less | than 2.0Mpa | - | - | - | - | - | - | 2.0Mpa or Less | than 2.0Mpa | than 2.0Mpa | than 2.0Mpa | than 2.0Mpa | than 2.0Mpa | than 2.0Mpa | than 2.0Mpa | than 2.0Mpa | than 2.0Mpa | than 2.0Mpa | than 2.0Mpa | than 2.0Mpa |
| Related Part Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Interior Resin Lining | No | No | No | No | No | No | No | No | No | No | No | No | No | No | No | No | No | No | No | No | No | No | No | No | No | No | No | No | No | No | No | No | No | Presence | Presence | Presence | Presence | Presence | Presence | Presence | Presence | Presence | Presence | Presence | Presence |
Loading...
Configure
Specification/Dimensions
-
Connecting Shape
-
Environmentally Friendly
-
Connection Type
- Thread <-> Thread, Equal Dia. Same Type
- Thread <-> Thread, Equal Dia. Different Type
- Thread <-> Thread, Unequal Dia.
- Thread <-> Steel Pipe
- Screws
- Flange
-
Properties / applications
-
Material
- Stainless Steel
- Steel
- Brass
- Aluminum
- Resin
- Bronze
- Cast Iron
-
Nominal of Thread M1
-
Connection Thread Type M1
-
Connection Thread Type M2
-
Nominal of Thread M2
-
Applicable Fluid
- Water
- Air
- Steam
- Gas
- Chemical
- Oil
- Not specified by Manufacturer
-
Type
- Fitting
- Related Products
-
Max. Operating Pressure(MPa)
-
Surface Treatment
- Not Provided
- Trivalent Chromate
- Chrome Plating
- Nickel Plating
- Zinc Plating
- Black Oxide
- Painted
- Resin Coating
- Polishing
- Zinc Electroplating
-
Types of Screw 3 (When Different Dia. or Different Type Screw)
-
Nominal of Thread 3(Different Diameters or Different Type Screw)
-
Types of Screw 4 (When Different Dia. or Different Type Screw)
-
Nominal of Thread 4(Different Diameters or Different Type Screw)
-
Material Details
-
Divisions of Max. Operating Pressure
- 1.0Mpa or Less
- 2.0Mpa or Less
- than 2.0Mpa
-
Related Part Type
- Valve
- Nut
- Hex Wrench
- Gasket
- Hydraulic Tester
-
Interior Resin Lining
- Presence
- No
Narrow search by specifying Manufacturer
-
- MISUMI (0)
- CK_KINZOKU (101)
- RIKEN (65)
- JFEPIPEFITTING (59)
- HITACHI KINZOKU (50)
- YODOSHI (27)
- ONDASEISAKUSYO (18)
- NAGOYA (17)
- ON INDUSTRIES (15)
- SEKISUI_ (9)
- INOC (8)
- KITZ (4)
- MIETECHNO (2)
- OSAKATSUGITE (1)
- FESTO (0)
- MEIJIKIKAI (0)
- EASUN (0)
- TOYO FITTING (0)
- FLONCHEMICAL (0)
- KURITA (0)
- IHARA SCIENCE (0)
- TRUSCO NAKAYAMA (0)
- YAMATOSANKI (0)
- FLOBAL (0)
- NABEYA BI-TECH (0)
- YAMATOTOKUSYUKO (0)
- ASOH (0)
- SVF (0)
- FUJITOKU (0)
- KOYO (0)
- ESCO (0)
- FUJIIKOUATU (0)
- MIYAKO (0)
CAD
-
- 2D
- 3D
Related Categories to Screw Fittings, Screw-In Type Flanges
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy