(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Screw Fittings, Screw-In Type Flanges（Surface Treatment：Resin Coating Page2）
| Days to Ship |
|
|---|
-
Steel Pipe Fitting, Screw-In Pipe Fitting, Union Standard
RIKEN
Maximum operating pressure: 2.5 MPa (steady flow of water at no more than 120°C or below), 1.0 MPa (steam, air, gas, and oil at no more than 300°C).
Standard Price: MYR 49.16- Days to Ship: 7 Day(s) or more -
Reducing Elbow Pipe Fittings for Steel Pipes, Screw-In
RIKEN
Maximum operating pressure: 2.5 MPa (static water: ≤ 120°C), 1.0 MPa (vapor, air, gas, and oil: ≤ 300°C).
Standard Price: MYR 21.46- Days to Ship: 7 Day(s) or more -
Fitting for Steel Pipes, Screw-in Type Pipe Fitting, Reducing Socket
RIKEN
Maximum operating pressure: 2.5 MPa (steady flow of water at no more than 120°C), 1.0 MPa (steam, air, gas, and oil at no more than 300°C).
Standard Price: MYR 22.18- Days to Ship: 7 Day(s) or more -
Fitting for Steel Pipes, Screw-in Type Pipe Fitting, Reducing Tee
RIKEN
Maximum operating pressure: 2.5 MPa (steady flow of water at no more than 120°C), 1.0 MPa (steam, air, gas, and oil at no more than 300°C).
Standard Price: MYR 26.80- Days to Ship: 7 Day(s) or more -
Flange Assembly Pipe Fittings for Steel Pipes, Screw-In
RIKEN
Maximum operating pressure: 2.5 MPa (static water: ≤ 120°C), 1.0 MPa (vapor, air, gas, and oil: ≤ 300°C).
Standard Price: MYR 107.55- Days to Ship: 7 Day(s) or more -
Ductile Cast Iron Mating Flange 10K Pipe Flange
OSAKATSUGITE
Ductile cast-iron mating flange 10K pipe flange manufactured by Osaka Pipe Fitting and Valve Mfg. Co., Ltd., a recognized name in the field of JIS standard-compliant valves and flanges.
· Materials: cast iron
· Applicable fluids: water.
· Surface treatment: casting, dissolved zinc plating, epoxy.Standard Price: MYR 68.40- Days to Ship: 9 Day(s) or more -
Inner Diameter Blind Flange and Water Supplying Flange with Inner Diameter which Can Stop Water
OSAKATSUGITE
[Features]
▪ Radial load bearing capacity complies with heavy load and impact load as the lines of roller and track come in contact.
▪ It is easy to install/remove the inner and outer rings as those are different in shape.Standard Price: MYR 534.20- Days to Ship: 20 Day(s) or more -
Pre-Seal HB Gold Underground Type (Exterior Transparent Coating for Fire Extinguishing Pipes) Elbow
CK_KINZOKU
Buried transparent joint with seal for fire extinguishing pressure piping.
[Features]
·Eliminates the need to apply sealant.
·Light screwing torque.
·Since the seal material covers the threads, the threads do not rust.
·Attachment of the rubber ring can be easily confirmed.
·Accurate construction is realized by managing excess screws.
·Made in Japan and won the GOOD DESIGN Award.
[Applications]
·For bends in STPG VS pipes.Standard Price: MYR 606.52- Days to Ship: 13 Day(s) or more -
Pre-Sealed HB Gold Buried Type (Fire Fighting Piping Outer Transparent Covering) 45° Elbow
CK_KINZOKU
Buried transparent joint with seal for fire extinguishing pressure piping.
[Features]
·Eliminates the need to apply sealant.
·Light screwing torque.
·Since the seal material covers the threads, the threads do not rust.
·Attachment of the rubber ring can be easily confirmed.
·Accurate construction is realized by managing excess screws.
·Made in Japan and won the GOOD DESIGN Award.
[Applications]
·For 45° bends in STPG VS pipes.Standard Price: MYR 1,056.49- Days to Ship: 13 Day(s) or more -
CK_KINZOKU
Transparent joint for buried fire extinguishing pressure piping.
[Features]
·Attachment of the rubber ring can be easily confirmed.
·Accurate construction is realized by managing excess screws.
·Made in Japan and won the GOOD DESIGN Award.
[Applications]
·For bends in STPG VS pipes.Standard Price: MYR 583.09- Days to Ship: 13 Day(s) or more -
Pre-Sealed Transparent PC Core Fitting, Normal Type Lining Pipe Connection TPC Series Elbow
CK_KINZOKU
[Features]With pre seal transparent PC core fitting, defects during installation can be visually checked. Furthermore, installation completion can be seen at a glance
Standard Price: MYR 34.60- Days to Ship: 13 Day(s) or more -
Pre-Sealed Transparent PC Core Fitting, Normal Type Lining Pipe Connection TPC Series 45° Elbow
CK_KINZOKU
[Features]With pre seal transparent PC core fitting, defects during installation can be visually checked. Furthermore, installation completion can be seen at a glance
Standard Price: MYR 48.19- Days to Ship: 13 Day(s) or more -
CK_KINZOKU
[Features]With pre seal transparent PC core fitting, defects during installation can be visually checked. Furthermore, installation completion can be seen at a glance
Standard Price: MYR 47.60- Days to Ship: 13 Day(s) or more -
CK_KINZOKU
[Features]With pre seal transparent PC core fitting, defects during installation can be visually checked. Furthermore, installation completion can be seen at a glance
Standard Price: MYR 39.67- Days to Ship: 13 Day(s) or more -
CK_KINZOKU
[Features]With pre seal transparent PC core fitting, defects during installation can be visually checked. Furthermore, installation completion can be seen at a glance
Standard Price: MYR 47.60- Days to Ship: 13 Day(s) or more -
CK_KINZOKU
[Features]With pre seal transparent PC core fitting, defects during installation can be visually checked. Furthermore, installation completion can be seen at a glance
Standard Price: MYR 55.02- Days to Ship: 13 Day(s) or more -
CK_KINZOKU
[Features]With pre seal transparent PC core fitting, defects during installation can be visually checked. Furthermore, installation completion can be seen at a glance
Standard Price: MYR 48.53- Days to Ship: 13 Day(s) or more -
CK_KINZOKU
[Features]With pre seal transparent PC core fitting, defects during installation can be visually checked. Furthermore, installation completion can be seen at a glance
Standard Price: MYR 135.19- Days to Ship: 13 Day(s) or more -
CK_KINZOKU
[Features]With pre seal transparent PC core fitting, defects during installation can be visually checked. Furthermore, installation completion can be seen at a glance
Standard Price: MYR 123.05- Days to Ship: 13 Day(s) or more -
CK_KINZOKU
[Features]With pre seal transparent PC core fitting, defects during installation can be visually checked. Furthermore, installation completion can be seen at a glance
Standard Price: MYR 128.11- Days to Ship: 13 Day(s) or more -
PC Core Fittings - for Lining Steel Pipe Connection - Elbow
CK_KINZOKU
Embedded threaded joint for polyethylene powder lined steel pipes for water supply and hard vinyl chloride lined steel pipes for water supply.
This pipe end anti-corrosion joint for inner and outer surface lining steel pipes has excellent anti-corrosion performance by coating the outer surface of the core joint with a thick polyamide resin or the like.
[Features]
·It has excellent anti-corrosion performance.
·The socket sleeve is made long and completely wraps around the tube sheath.
·The gap between the pipe and joint is sealed with a special rubber ring or caulking tape to prevent water from entering and to provide electrical insulation.
·It has excellent corrosion resistance and weather resistance.
·There is no need to worry about corrosion even when buried in salty soil, soil or concrete where local batteries are likely to occur, or where there is a lot of stray current.
·Increase efficiency of piping construction.
·By using rubber rings, there is no need to wrap anti-corrosion tape around the body of the joint and where it connects to the pipe, which speeds up the installation of pipes.
[Applications]
·Ideal for bends in lining buried pipes.Standard Price: MYR 34.60- Days to Ship: 13 Day(s) or more -
PC Core Fittings - for Lining Steel Pipe Connection - 45° Elbow
CK_KINZOKU
Embedded threaded joint for polyethylene powder lined steel pipes for water supply and hard vinyl chloride lined steel pipes for water supply.
[Features]
·No PVC is used in the core joint, making it easy to recycle.
·Excellent anti-corrosion performance due to the dual structure of lip and O-ring.
·Also supports rolled screws.
· Made in Japan.
·Uses lead-free bronze.
[Applications]
·Ideal for 45° bends in buried lining piping.Standard Price: MYR 48.19- Days to Ship: 13 Day(s) or more -
PC Core Fittings - for Lining Steel Pipe Connection - Tee
CK_KINZOKU
Embedded threaded joint for polyethylene powder lined steel pipes for water supply and hard vinyl chloride lined steel pipes for water supply.
[Features]
·No PVC is used in the core joint, making it easy to recycle.
·Excellent anti-corrosion performance due to the dual structure of lip and O-ring.
·Also supports rolled screws.
· Made in Japan.
[Applications]
·Ideal for branches of lining buried pipes.Standard Price: MYR 47.60- Days to Ship: 13 Day(s) or more -
PC Core Fittings, for Lined Steel Pipe Connection, Socket
CK_KINZOKU
Embedded threaded joint for polyethylene powder lined steel pipes for water supply and hard vinyl chloride lined steel pipes for water supply.
[Features]
·No PVC is used in the core joint, making it easy to recycle.
·Excellent anti-corrosion performance due to the dual structure of lip and O-ring.
·Also supports rolled screws.
· Made in Japan.
[Applications]
·Ideal for extending buried lining piping.Standard Price: MYR 39.67- Days to Ship: 13 Day(s) or more -
PC Core Fittings, for Lined Steel Pipe Connection, Unequal Diameter Elbow
CK_KINZOKU
Embedded threaded joint for polyethylene powder lined steel pipes for water supply and hard vinyl chloride lined steel pipes for water supply.
[Features]
·No PVC is used in the core joint, making it easy to recycle.
·Excellent anti-corrosion performance due to the dual structure of lip and O-ring.
·Also supports rolled screws.
· Made in Japan.
[Applications]
·Ideal for changing the size of bends in buried lining pipes.Standard Price: MYR 47.60- Days to Ship: 13 Day(s) or more -
PC Core Fittings, for Lined Steel Pipe Connection, Unequal Diameter Tee
CK_KINZOKU
Embedded threaded joint for polyethylene powder lined steel pipes for water supply and hard vinyl chloride lined steel pipes for water supply.
Pipe end anti-corrosion joints for inner and outer surface lining steel pipes with excellent anti-corrosion performance by coating the outer surface of the core joint with a thick polyamide resin or the like.
[Features]
·It has excellent anti-corrosion performance.
·The socket sleeve is made long and completely wraps around the tube sheath.
·The gap between the pipe and joint is sealed with a special rubber ring or caulking tape to prevent water from entering and to provide electrical insulation.
·It has excellent corrosion resistance and weather resistance.
·There is no need to worry about corrosion even when buried in salty soil, soil or concrete where local batteries are likely to occur, or where there is a lot of stray current.
·Increase efficiency of piping construction.
·By using rubber rings, there is no need to wrap anti-corrosion tape around the body of the joint and where it connects to the pipe, which speeds up the installation of pipes.
[Applications]
·For branch size conversion of buried lining piping.Standard Price: MYR 55.02- Days to Ship: 13 Day(s) or more -
PC Core Fittings, for Lined Steel Pipe Connection, Unequal Diameter Socket
CK_KINZOKU
Embedded threaded joint for polyethylene powder lined steel pipes for water supply and hard vinyl chloride lined steel pipes for water supply.
[Features]
·No PVC is used in the core joint, making it easy to recycle.
·Excellent anti-corrosion performance due to the dual structure of lip and O-ring.
·Also supports rolled screws.
· Made in Japan.
[Applications]
·Ideal for changing the size of buried lining pipes.Standard Price: MYR 48.53- Days to Ship: 13 Day(s) or more -
CK_KINZOKU
Embedded threaded joint for polyethylene powder lined steel pipes for water supply and hard vinyl chloride lined steel pipes for water supply.
[Features]
·No PVC is used in the core joints. Easy to recycle.
·Excellent anti-corrosion performance due to the double structure of lip and O-ring.
·Also supports rolled screws.
· Made in Japan.
·Uses lead-free bronze.
[Applications]
·For equipment connections of buried lining piping.Standard Price: MYR 120.02- Days to Ship: 13 Day(s) or more -
CK_KINZOKU
Embedded threaded joint for polyethylene powder lined steel pipes for water supply and hard vinyl chloride lined steel pipes for water supply.
[Features]
·No PVC is used in the core joints. Easy to recycle.
·Excellent anti-corrosion performance due to the double structure of lip and O-ring.
·Also supports rolled screws.
· Made in Japan.
·Uses lead-free bronze.
[Applications]
·For equipment connections of buried lining piping.Standard Price: MYR 222.17 Days to Ship: 13 Day(s) or more -
CK_KINZOKU
Embedded threaded joint for polyethylene powder lined steel pipes for water supply and hard vinyl chloride lined steel pipes for water supply.
Pipe end anti-corrosion joints for inner and outer surface lining steel pipes with excellent anti-corrosion performance by coating the outer surface of the core joint with a thick polyamide resin or the like.
[Features]
·It has excellent anti-corrosion performance.
·The socket sleeve is made long and completely wraps around the tube sheath.
·The gap between the pipe and joint is sealed with a special rubber ring or caulking tape to prevent water from entering and to provide electrical insulation.
·It has excellent corrosion resistance and weather resistance.
·There is no need to worry about corrosion even when buried in salty soil, soil or concrete where local batteries are likely to occur, or where there is a lot of stray current.
·Increase efficiency of piping construction.
·By using rubber rings, there is no need to wrap anti-corrosion tape around the body of the joint and where it connects to the pipe, which speeds up the installation of pipes.
[Applications]
·For equipment connections of buried lining piping.Standard Price: MYR 135.19- Days to Ship: 13 Day(s) or more -
CK_KINZOKU
Embedded threaded joint for polyethylene powder lined steel pipes for water supply and hard vinyl chloride lined steel pipes for water supply.
[Features]
·No PVC is used in the core joints. Easy to recycle.
·Excellent anti-corrosion performance due to the double structure of lip and O-ring.
·Also supports rolled screws.
· Made in Japan.
·Uses lead-free bronze.
[Applications]
·For equipment connections of buried lining piping.Standard Price: MYR 123.05- Days to Ship: 13 Day(s) or more -
CK_KINZOKU
Embedded threaded joint for polyethylene powder lined steel pipes for water supply and hard vinyl chloride lined steel pipes for water supply.
[Features]
·No PVC is used in the core joint, making it easy to recycle.
·Excellent anti-corrosion performance due to the dual structure of lip and O-ring.
·Also supports rolled screws.
· Made in Japan.
·Uses lead-free bronze.
[Applications]
·Ideal for equipment connections for buried lining piping.Standard Price: MYR 128.11- Days to Ship: 13 Day(s) or more -
CK_KINZOKU
Embedded threaded joint for polyethylene powder lined steel pipes for water supply and hard vinyl chloride lined steel pipes for water supply.
[Features]
·No PVC is used in the core joints. Easy to recycle.
·Excellent anti-corrosion performance due to the double structure of lip and O-ring.
·Also supports rolled screws.
· Made in Japan.
·Uses lead-free bronze.
[Applications]
·For equipment connections of buried lining piping.Standard Price: MYR 117.32- Days to Ship: 13 Day(s) or more -
Transparent PC Core Fittings (TPC) for Lined Steel Pipe Connection, Elbow
CK_KINZOKU
Embedded threaded joint for polyethylene powder lined steel pipes for water supply and hard vinyl chloride lined steel pipes for water supply.
[Features]
·The attachment of the rubber ring can be easily checked.
·When used in combination with a transparent seal ring, correct construction can be performed by controlling excess threads.
·The wrench can be securely attached to the joint body.
·Listed in the Ministry of Land, Infrastructure, Transport and Tourism Machinery and Equipment Construction Management Guidelines.
· Made in Japan.
·GOOD DESIGN award winning product.
[Applications]
·For bends in buried lining pipes.Standard Price: MYR 34.60- Days to Ship: 13 Day(s) or more -
Transparent PC Core Fitting (TPC) Lining Steel Pipe Connection 45° Elbow
CK_KINZOKU
Embedded threaded joint for polyethylene powder lined steel pipes for water supply and hard vinyl chloride lined steel pipes for water supply.
[Features]
·Attachment of the rubber ring can be easily confirmed.
·Correct construction is possible by managing extra screws.
·Listed in the Ministry of Land, Infrastructure, Transport and Tourism Machinery and Equipment Construction Management Guidelines.
· Made in Japan.
·GOOD DESIGN award winning product.
[Applications]
·For 45° bends in buried lining pipes.Standard Price: MYR 48.19- Days to Ship: 13 Day(s) or more -
Transparent PC Core Fittings (TPC) - for Lining Steel Pipe Connection - Tee
CK_KINZOKU
Embedded threaded joint for polyethylene powder lined steel pipes for water supply and hard vinyl chloride lined steel pipes for water supply.
[Features]
·Attachment of the rubber ring can be easily confirmed.
·Correct construction is possible by managing extra screws.
·Listed in the Ministry of Land, Infrastructure, Transport and Tourism Machinery and Equipment Construction Management Guidelines.
· Made in Japan.
·GOOD DESIGN award winning product.
[Applications]
·For branches of buried lining pipes.Standard Price: MYR 47.60- Days to Ship: 13 Day(s) or more -
Transparent PC Core Fittings (TPC) - for Lining Steel Pipe Connection - Socket
CK_KINZOKU
Buried transparent screw fittings for polyethylene powder lined steel pipes for water supply and hard vinyl chloride lined steel pipes for water supply.
[Features]
·The attachment of the rubber ring can be easily checked.
·When used in combination with a transparent seal ring, correct construction can be performed by controlling excess threads.
·The wrench can be securely attached to the joint body.
·Listed in the Ministry of Land, Infrastructure, Transport and Tourism Machinery and Equipment Construction Management Guidelines.
· Made in Japan.
·GOOD DESIGN award winning product.
[Applications]
·For extension of buried lining piping.Standard Price: MYR 39.67- Days to Ship: 13 Day(s) or more -
Transparent PC Core Fittings (TPC) - for Lining Steel Pipe Connection - Reducing Tee
CK_KINZOKU
Embedded threaded joint for polyethylene powder lined steel pipes for water supply and hard vinyl chloride lined steel pipes for water supply.
[Features]
·Attachment of the rubber ring can be easily confirmed.
·Correct construction is possible by managing extra screws.
·Listed in the Ministry of Land, Infrastructure, Transport and Tourism Machinery and Equipment Construction Management Guidelines.
· Made in Japan.
·GOOD DESIGN award winning product.
[Applications]
·For changing the size of the branches of buried lining pipes.Standard Price: MYR 55.02- Days to Ship: 13 Day(s) or more -
CK_KINZOKU
Embedded threaded joint for polyethylene powder lined steel pipes for water supply and hard vinyl chloride lined steel pipes for water supply.
[Features]
·Attachment of the rubber ring can be easily confirmed.
·Correct construction is possible by managing extra screws.
·Listed in the Ministry of Land, Infrastructure, Transport and Tourism Machinery and Equipment Construction Management Guidelines.
· Made in Japan.
·GOOD DESIGN award winning product.
[Applications]
·For equipment connections of buried lining piping.Standard Price: MYR 135.19- Days to Ship: 13 Day(s) or more -
CK_KINZOKU
Embedded threaded joint for polyethylene powder lined steel pipes for water supply and hard vinyl chloride lined steel pipes for water supply.
[Features]
·Attachment of the rubber ring can be easily confirmed.
·Correct construction is possible by managing extra screws.
·Listed in the Ministry of Land, Infrastructure, Transport and Tourism Machinery and Equipment Construction Management Guidelines.
· Made in Japan.
·GOOD DESIGN award winning product.
[Applications]
·For equipment connections of buried lining piping.Standard Price: MYR 123.05- Days to Ship: 13 Day(s) or more -
CK_KINZOKU
Embedded threaded joint for polyethylene powder lined steel pipes for water supply and hard vinyl chloride lined steel pipes for water supply.
[Features]
·Attachment of the rubber ring can be easily confirmed.
·Correct construction is possible by managing extra screws.
·Listed in the Ministry of Land, Infrastructure, Transport and Tourism Machinery and Equipment Construction Management Guidelines.
· Made in Japan.
·GOOD DESIGN award winning product.
[Applications]
·For equipment connections of buried lining piping.Standard Price: MYR 128.11- Days to Ship: 13 Day(s) or more -
CK_KINZOKU
Embedded threaded joint for polyethylene powder lined steel pipes for water supply and hard vinyl chloride lined steel pipes for water supply.
[Features]
·Attachment of the rubber ring can be easily confirmed.
·Correct construction is possible by managing extra screws.
·Listed in the Ministry of Land, Infrastructure, Transport and Tourism Machinery and Equipment Construction Management Guidelines.
· Made in Japan.
·GOOD DESIGN award winning product.
[Applications]
·For equipment connections of buried lining piping.Standard Price: MYR 117.32- Days to Ship: 13 Day(s) or more -
Pressure Pipe Exterior Cladding 20 K Fitting Elbow
CK_KINZOKU
Buried joint for pressure piping.
[Features]
·The socket sleeve is made long and completely wraps around the tube sheath. The gap between the pipe and joint is sealed with a special rubber ring or caulking tape to prevent water from entering and to insulate electrically.
·There is no need to worry about corrosion even when buried in salty soil, soil or concrete where local batteries are likely to occur, or where there is a lot of stray current.
·There is no need to wrap caulking tape around the body of the fitting or where it connects to the pipe, which speeds up the installation of pipes.
·Since vinyl chloride is not used in the resin, it can be recycled together with iron without separation.
·Certified by the Japan Fire Equipment Safety Center.
[Applications]
·For bends in STPG VS pipes.Standard Price: MYR 606.52- Days to Ship: 13 Day(s) or more -
20 K Fittings with Outer Coating for Pressure Piping - Socket
CK_KINZOKU
Buried joint for pressure piping.
[Features]
·The socket sleeve is made long and completely wraps around the tube sheath. The gap between the pipe and joint is sealed with a special rubber ring or caulking tape to prevent water from entering and to insulate electrically.
·There is no need to worry about corrosion even when buried in salty soil, soil or concrete where local batteries are likely to occur, or where there is a lot of stray current.
·There is no need to wrap caulking tape around the body of the fitting or where it connects to the pipe, which speeds up the installation of pipes.
·Since vinyl chloride is not used in the resin, it can be recycled together with iron without separation.
·Certified by the Japan Fire Equipment Safety Center.
[Applications]
·For extension of buried pressure piping.Standard Price: MYR 490.76- Days to Ship: 13 Day(s) or more -
Pressure Pipe Exterior Cladding 20K Fitting 45° Elbow
CK_KINZOKU
Buried joint for pressure piping.
[Features]
·Since vinyl chloride is not used in the outer resin, it can be recycled together with iron without separation.
·Certified by the Japan Fire Equipment Safety Center.
[Applications]
·For 45° bends in STPG VS pipes.Standard Price: MYR 1,056.49- Days to Ship: 13 Day(s) or more
| Brand |
|---|
| Product Series |
| Days to Ship |
| Connecting Shape |
| Environmentally Friendly |
| Connection Type |
| Properties / applications |
| Material |
| Nominal of Thread M1 |
| Connection Thread Type M1 |
| Connection Thread Type M2 |
| Nominal of Thread M2 |
| Applicable Fluid |
| Type |
| Max. Operating Pressure(MPa) |
| Surface Treatment |
| Types of Screw 3 (When Different Dia. or Different Type Screw) |
| Nominal of Thread 3(Different Diameters or Different Type Screw) |
| Types of Screw 4 (When Different Dia. or Different Type Screw) |
| Nominal of Thread 4(Different Diameters or Different Type Screw) |
| Material Details |
| Divisions of Max. Operating Pressure |
| Related Part Type |
| Interior Resin Lining |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | RIKEN | RIKEN | RIKEN | RIKEN | RIKEN | OSAKATSUGITE | OSAKATSUGITE | CK_KINZOKU | CK_KINZOKU | CK_KINZOKU | CK_KINZOKU | CK_KINZOKU | CK_KINZOKU | CK_KINZOKU | CK_KINZOKU | CK_KINZOKU | CK_KINZOKU | CK_KINZOKU | CK_KINZOKU | CK_KINZOKU | CK_KINZOKU | CK_KINZOKU | CK_KINZOKU | CK_KINZOKU | CK_KINZOKU | CK_KINZOKU | CK_KINZOKU | CK_KINZOKU | CK_KINZOKU | CK_KINZOKU | CK_KINZOKU | CK_KINZOKU | CK_KINZOKU | CK_KINZOKU | CK_KINZOKU | CK_KINZOKU | CK_KINZOKU | CK_KINZOKU | CK_KINZOKU | CK_KINZOKU | CK_KINZOKU | CK_KINZOKU | CK_KINZOKU | CK_KINZOKU | CK_KINZOKU |
| Product Series | Fitting for Steel Pipes, Screw-in Type Pipe Fitting, Reducing Socket | Fitting for Steel Pipes, Screw-in Type Pipe Fitting, Reducing Tee | Inner Diameter Blind Flange and Water Supplying Flange with Inner Diameter which Can Stop Water | Pre-Seal HB Gold Underground Type (Exterior Transparent Coating for Fire Extinguishing Pipes) Elbow | Pre-Sealed HB Gold Buried Type (Fire Fighting Piping Outer Transparent Covering) 45° Elbow | Pre-Sealed Transparent PC Core Fitting, Normal Type Lining Pipe Connection TPC Series Elbow | Pre-Sealed Transparent PC Core Fitting, Normal Type Lining Pipe Connection TPC Series 45° Elbow | PC Core Fittings - for Lining Steel Pipe Connection - 45° Elbow | PC Core Fittings, for Lined Steel Pipe Connection, Unequal Diameter Elbow | PC Core Fittings, for Lined Steel Pipe Connection, Unequal Diameter Tee | PC Core Fittings, for Lined Steel Pipe Connection, Unequal Diameter Socket | Transparent PC Core Fittings (TPC) for Lined Steel Pipe Connection, Elbow | Transparent PC Core Fitting (TPC) Lining Steel Pipe Connection 45° Elbow | Transparent PC Core Fittings (TPC) - for Lining Steel Pipe Connection - Tee | Transparent PC Core Fittings (TPC) - for Lining Steel Pipe Connection - Socket | Transparent PC Core Fittings (TPC) - for Lining Steel Pipe Connection - Reducing Tee | 20 K Fittings with Outer Coating for Pressure Piping - Socket | ||||||||||||||||||||||||||||
| Days to Ship | 7 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 9 Day(s) or more | 20 Day(s) or more | 13 Day(s) or more | 13 Day(s) or more | 13 Day(s) or more | 13 Day(s) or more | 13 Day(s) or more | 13 Day(s) or more | 13 Day(s) or more | 13 Day(s) or more | 13 Day(s) or more | 13 Day(s) or more | 13 Day(s) or more | 13 Day(s) or more | 13 Day(s) or more | 13 Day(s) or more | 13 Day(s) or more | 13 Day(s) or more | 13 Day(s) or more | 13 Day(s) or more | 13 Day(s) or more | 13 Day(s) or more | 13 Day(s) or more | 13 Day(s) or more | 13 Day(s) or more | 13 Day(s) or more | 13 Day(s) or more | 13 Day(s) or more | 13 Day(s) or more | 13 Day(s) or more | 13 Day(s) or more | 13 Day(s) or more | 13 Day(s) or more | 13 Day(s) or more | 13 Day(s) or more | 13 Day(s) or more | 13 Day(s) or more | 13 Day(s) or more | 13 Day(s) or more | 13 Day(s) or more |
| Connecting Shape | Male, Female Union | - | Socket | Tees | Flange | Flange | Flange | Elbow | Elbow | Socket | Elbow | Elbow | Tees | Socket | Elbow | Tees | Socket | Socket | Street Elbow | Bushings/Male Female Socket | Elbow | Elbow | Tees | Socket | Elbow | Tees | Socket | Elbow | Tees | Socket | Street Elbow | Bushings/Male Female Socket | Socket | Elbow | Elbow | Tees | Socket | Tees | Socket | Street Elbow | Bushings/Male Female Socket | Socket | Elbow | Socket | Elbow |
| Environmentally Friendly | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Connection Type | Thread <-> Thread, Equal Dia. Same Type | Thread <-> Thread, Unequal Dia. | Thread <-> Thread, Unequal Dia. | Thread <-> Thread, Unequal Dia. | Flange | Flange | Flange | Thread <-> Thread, Equal Dia. Same Type | Thread <-> Thread, Equal Dia. Same Type | Thread <-> Thread, Unequal Dia. | Thread <-> Thread, Equal Dia. Same Type | Thread <-> Thread, Equal Dia. Same Type | Thread <-> Thread, Equal Dia. Same Type | Thread <-> Thread, Equal Dia. Same Type | Thread <-> Thread, Unequal Dia. | Thread <-> Thread, Unequal Dia. | Thread <-> Thread, Unequal Dia. | Thread <-> Thread, Equal Dia. Same Type / Thread <-> Thread, Unequal Dia. | Thread <-> Thread, Equal Dia. Same Type | Thread <-> Thread, Equal Dia. Same Type | Thread <-> Thread, Equal Dia. Same Type | Thread <-> Thread, Equal Dia. Same Type | Thread <-> Thread, Equal Dia. Same Type | Thread <-> Thread, Equal Dia. Same Type | Thread <-> Thread, Unequal Dia. | Thread <-> Thread, Unequal Dia. | Thread <-> Thread, Unequal Dia. | Thread <-> Thread, Equal Dia. Same Type / Thread <-> Thread, Unequal Dia. | Thread <-> Thread, Unequal Dia. | Thread <-> Thread, Equal Dia. Same Type / Thread <-> Thread, Unequal Dia. | Thread <-> Thread, Equal Dia. Same Type | Thread <-> Thread, Equal Dia. Same Type | Thread <-> Thread, Equal Dia. Same Type / Thread <-> Thread, Unequal Dia. | Thread <-> Thread, Equal Dia. Same Type | Thread <-> Thread, Equal Dia. Same Type | Thread <-> Thread, Equal Dia. Same Type | Thread <-> Thread, Equal Dia. Same Type | Thread <-> Thread, Unequal Dia. | Thread <-> Thread, Equal Dia. Same Type / Thread <-> Thread, Unequal Dia. | Thread <-> Thread, Equal Dia. Same Type | Thread <-> Thread, Equal Dia. Same Type | Thread <-> Thread, Equal Dia. Same Type / Thread <-> Thread, Unequal Dia. | Thread <-> Thread, Equal Dia. Same Type | Thread <-> Thread, Equal Dia. Same Type | Thread <-> Thread, Equal Dia. Same Type |
| Properties / applications | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Material | Steel | Steel | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron |
| Nominal of Thread M1 | 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) / 2 1/2B(65A) / 3B(80A) / 4B(100A) | 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) / 2 1/2B(65A) / 3B(80A) / 4B(100A) / 5B(125A) | 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) / 2 1/2B(65A) / 3B(80A) / 4B(100A) / 5B(125A) / 6B(150A) | 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) / 2 1/2B(65A) / 3B(80A) / 4B(100A) / 5B(125A) / 6B(150A) | 1/2B(15A) / 3/4B(20A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) / 2 1/2B(65A) / 3B(80A) / 4B(100A) / 5B(125A) / 6B(150A) | 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) / 2 1/2B(65A) / 3B(80A) / 4B(100A) / 5B(125A) / 6B(150A) / 8B(200A) | - | 2 1/2B(65A) / 3B(80A) / 4B(100A) / 5B(125A) | 3B(80A) / 4B(100A) | 3B(80A) / 4B(100A) | 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) / 2 1/2B(65A) / 3B(80A) / 4B(100A) / 5B(125A) | 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) / 2 1/2B(65A) / 3B(80A) / 4B(100A) | 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) / 2 1/2B(65A) / 3B(80A) / 4B(100A) | 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) / 2 1/2B(65A) / 3B(80A) / 4B(100A) / 5B(125A) | 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) / 2 1/2B(65A) / 3B(80A) / 4B(100A) | 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) / 2 1/2B(65A) / 3B(80A) / 4B(100A) | 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) / 2 1/2B(65A) / 3B(80A) / 4B(100A) / 5B(125A) | 3/4B(20A) | 1/2B(15A) / 3/4B(20A) / 1B(25A) | 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) | 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) / 2 1/2B(65A) / 3B(80A) / 4B(100A) / 5B(125A) | 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) / 2 1/2B(65A) / 3B(80A) / 4B(100A) | 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) / 2 1/2B(65A) / 3B(80A) / 4B(100A) | 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) / 2 1/2B(65A) / 3B(80A) / 4B(100A) / 5B(125A) | 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) / 2 1/2B(65A) / 3B(80A) / 4B(100A) | 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) / 2 1/2B(65A) / 3B(80A) / 4B(100A) | 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) / 2 1/2B(65A) / 3B(80A) / 4B(100A) / 5B(125A) | 3/4B(20A) | 1B(25A) | 3/4B(20A) | 1/2B(15A) / 3/4B(20A) / 1B(25A) | 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) | 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) | 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) / 2 1/2B(65A) / 3B(80A) / 4B(100A) / 5B(125A) | 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) / 2 1/2B(65A) / 3B(80A) / 4B(100A) | 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) / 2 1/2B(65A) / 3B(80A) / 4B(100A) | 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) / 2 1/2B(65A) / 3B(80A) / 4B(100A) / 5B(125A) | 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) / 2 1/2B(65A) / 3B(80A) / 4B(100A) | 3/4B(20A) | 1/2B(15A) / 3/4B(20A) / 1B(25A) | 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) | 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) | 2 1/2B(65A) / 3B(80A) / 4B(100A) / 5B(125A) | 2 1/2B(65A) / 3B(80A) / 4B(100A) / 5B(125A) | 3B(80A) / 4B(100A) |
| Connection Thread Type M1 | Rc | Rc | Rc | Rc | Rc | Rc | - | Rc | Rc | Rc | Rc | Rc | Rc | Rc | Rc | Rc | Rc | Rc | Rc | Rc | Rc | Rc | Rc | Rc | Rc | Rc | Rc | Rc | Rc | Rc | Rc | Rc | Rc | Rc | Rc | Rc | Rc | Rc | Rc | Rc | Rc | Rc | Rc | Rc | Rc |
| Connection Thread Type M2 | - | Rc | Rc | Rc | - | - | - | - | - | Rc | - | - | - | - | - | Rc | Rc | Rc | R | R | - | - | - | - | - | Rc | Rc | - | Rc | Rc | R | R | Rc | - | - | - | - | Rc | Rc | R | R | Rc | - | - | - |
| Nominal of Thread M2 | - | 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) / 2 1/2B(65A) / 3B(80A) / 4B(100A) | 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) / 2 1/2B(65A) / 3B(80A) / 4B(100A) / 5B(125A) | 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) / 2 1/2B(65A) / 3B(80A) / 4B(100A) / 5B(125A) / 6B(150A) | - | - | - | - | - | 2 1/2B(65A) | - | - | - | - | 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) / 2 1/2B(65A) / 3B(80A) | 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) / 2 1/2B(65A) / 3B(80A) | 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) / 2 1/2B(65A) / 3B(80A) / 4B(100A) | 1/2B(15A) | 1/2B(15A) / 3/4B(20A) / 1B(25A) | 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) | - | - | - | - | 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) / 2 1/2B(65A) / 3B(80A) | 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) / 2 1/2B(65A) / 3B(80A) | 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) / 2 1/2B(65A) / 3B(80A) / 4B(100A) | 1/2B(15A) | 1/2B(15A) | 1/2B(15A) | 1/2B(15A) / 3/4B(20A) / 1B(25A) | 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) | 1/2B(15A) | - | - | - | - | 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) / 2 1/2B(65A) / 3B(80A) | 1/2B(15A) | 1/2B(15A) / 3/4B(20A) / 1B(25A) | 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) | 1/2B(15A) | - | - | - |
| Applicable Fluid | Water | Water | Water | Water | Water | Water | Water | Water / Air / Gas / Oil | Water / Air / Gas / Oil | Water / Air / Gas / Oil | Water | Water | Water | Water | Water | Water | Water | Water | Water | Water | Water | Water | Water | Water | Water | Water | Water | Water | Water | Water | Water | Water | Water | Water | Water | Water | Water | Water | Water | Water | Water | Water | Water / Air / Gas / Oil | Water / Air / Gas / Oil | Water / Air / Gas / Oil |
| Type | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting |
| Max. Operating Pressure(MPa) | 2.5 | 2.5 | 2.5 | 2.5 | 2.5 | - | - | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 13.8 | 13.8 | 13.8 |
| Surface Treatment | Resin Coating | Resin Coating | Resin Coating | Resin Coating | Resin Coating | Resin Coating | Resin Coating | Resin Coating | Resin Coating | Resin Coating | Resin Coating | Resin Coating | Resin Coating | Resin Coating | Resin Coating | Resin Coating | Resin Coating | Resin Coating | Resin Coating | Resin Coating | Resin Coating | Resin Coating | Resin Coating | Resin Coating | Resin Coating | Resin Coating | Resin Coating | Resin Coating | Resin Coating | Resin Coating | Resin Coating | Resin Coating | Resin Coating | Resin Coating | Resin Coating | Resin Coating | Resin Coating | Resin Coating | Resin Coating | Resin Coating | Resin Coating | Resin Coating | Resin Coating | Resin Coating | Resin Coating |
| Types of Screw 3 (When Different Dia. or Different Type Screw) | - | - | - | Rc | - | - | - | - | - | - | - | - | - | - | - | Rc | - | - | - | - | - | - | - | - | - | Rc | - | - | Rc | - | - | - | - | - | - | - | - | Rc | - | - | - | - | - | - | - |
| Nominal of Thread 3(Different Diameters or Different Type Screw) | - | - | - | 1 1/2B(40A) ～ 5B(125A) | - | - | - | - | - | - | - | - | - | - | - | 1 1/2B(40A) ～ 4B(100A) | - | - | - | - | - | - | - | - | - | 1 1/2B(40A) ～ 4B(100A) | - | - | 1B(25A) | - | - | - | - | - | - | - | - | 1 1/2B(40A) ～ 4B(100A) | - | - | - | - | - | - | - |
| Types of Screw 4 (When Different Dia. or Different Type Screw) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Nominal of Thread 4(Different Diameters or Different Type Screw) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Material Details | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Divisions of Max. Operating Pressure | than 2.0Mpa | than 2.0Mpa | than 2.0Mpa | than 2.0Mpa | than 2.0Mpa | - | - | 1.0Mpa or Less | 1.0Mpa or Less | 1.0Mpa or Less | 1.0Mpa or Less | 1.0Mpa or Less | 1.0Mpa or Less | 1.0Mpa or Less | 1.0Mpa or Less | 1.0Mpa or Less | 1.0Mpa or Less | 1.0Mpa or Less | 1.0Mpa or Less | 1.0Mpa or Less | 1.0Mpa or Less | 1.0Mpa or Less | 1.0Mpa or Less | 1.0Mpa or Less | 1.0Mpa or Less | 1.0Mpa or Less | 1.0Mpa or Less | 1.0Mpa or Less | 1.0Mpa or Less | 1.0Mpa or Less | 1.0Mpa or Less | 1.0Mpa or Less | 1.0Mpa or Less | 1.0Mpa or Less | 1.0Mpa or Less | 1.0Mpa or Less | 1.0Mpa or Less | 1.0Mpa or Less | 1.0Mpa or Less | 1.0Mpa or Less | 1.0Mpa or Less | 1.0Mpa or Less | than 2.0Mpa | than 2.0Mpa | than 2.0Mpa |
| Related Part Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Interior Resin Lining | No | No | No | No | No | No | No | No | No | No | Presence | Presence | Presence | Presence | Presence | Presence | Presence | Presence | Presence | Presence | Presence | Presence | Presence | Presence | Presence | Presence | Presence | Presence | Presence | Presence | Presence | Presence | Presence | Presence | Presence | Presence | Presence | Presence | Presence | Presence | Presence | Presence | No | No | No |
Loading...
Configure
Specification/Dimensions
-
Connecting Shape
-
Environmentally Friendly
-
Connection Type
- Thread <-> Thread, Equal Dia. Same Type
- Thread <-> Thread, Equal Dia. Different Type
- Thread <-> Thread, Unequal Dia.
- Thread <-> Steel Pipe
- Screws
- Flange
-
Properties / applications
-
Material
- Stainless Steel
- Steel
- Brass
- Aluminum
- Resin
- Bronze
- Cast Iron
-
Nominal of Thread M1
-
Connection Thread Type M1
-
Connection Thread Type M2
-
Nominal of Thread M2
-
Applicable Fluid
- Water
- Air
- Steam
- Gas
- Chemical
- Oil
- Not specified by Manufacturer
-
Type
- Fitting
- Related Products
-
Max. Operating Pressure(MPa)
-
Surface Treatment
- Not Provided
- Trivalent Chromate
- Chrome Plating
- Nickel Plating
- Zinc Plating
- Black Oxide
- Painted
- Resin Coating
- Polishing
- Zinc Electroplating
-
Types of Screw 3 (When Different Dia. or Different Type Screw)
-
Nominal of Thread 3(Different Diameters or Different Type Screw)
-
Types of Screw 4 (When Different Dia. or Different Type Screw)
-
Nominal of Thread 4(Different Diameters or Different Type Screw)
-
Material Details
-
Divisions of Max. Operating Pressure
- 1.0Mpa or Less
- 2.0Mpa or Less
- than 2.0Mpa
-
Related Part Type
- Valve
- Nut
- Hex Wrench
- Gasket
- Hydraulic Tester
-
Interior Resin Lining
- Presence
- No
Narrow search by specifying Manufacturer
-
- MISUMI (0)
- CK_KINZOKU (69)
- RIKEN (35)
- JFEPIPEFITTING (29)
- YODOSHI (13)
- OSAKATSUGITE (2)
- FESTO (0)
- MEIJIKIKAI (0)
- EASUN (0)
- TOYO FITTING (0)
- FLONCHEMICAL (0)
- SEKISUI_ (0)
- KURITA (0)
- IHARA SCIENCE (0)
- TRUSCO NAKAYAMA (0)
- INOC (0)
- YAMATOSANKI (0)
- FLOBAL (0)
- ON INDUSTRIES (0)
- NABEYA BI-TECH (0)
- MIETECHNO (0)
- YAMATOTOKUSYUKO (0)
- ASOH (0)
- SVF (0)
- HITACHI KINZOKU (0)
- FUJITOKU (0)
- ONDASEISAKUSYO (0)
- KOYO (0)
- ESCO (0)
- NAGOYA (0)
- FUJIIKOUATU (0)
- KITZ (0)
- MIYAKO (0)
CAD
-
- 2D
- 3D
Related Categories to Screw Fittings, Screw-In Type Flanges
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy