(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Tightening Fittings（Nominal of Thread：1/2 Page2）
| Days to Ship |
|
|---|
-
JUNKOSHA
Conforms to Japanese Industrial Standards JIS B8381 for "pneumatic pipe fittings." Allows for reliable connections because the mechanism takes the tube insert and clamps onto it with the sleeve and the cap nut. Each R (PT) screw size has a different colored screw seal.
- CAD ：
- 2D
Standard Price: MYR 59.14- Days to Ship: 9 Day(s) or more -
Junlon Brass Fitting, Service Tee
JUNKOSHA
Conforms to Japanese Industrial Standards JIS B8381 "Pneumatic Fittings." Allows for reliable connections because the mechanism clamps onto the tube insert with the sleeve and the cap nut. With collar thread seal for each R (PT) thread size.
- CAD ：
- 2D
Standard Price: MYR 59.14- Days to Ship: 9 Day(s) or more -
Junlon Stainless Steel Fitting Tee
JUNKOSHA
Usable across a broad temperature range. Free of wear to tubing due to over-tightening of cap nut, etc. No abnormality in the connector unless the tube ruptures. Does not require management of cap nut tightening torque.
- CAD ：
- 2D
Standard Price: MYR 384.17- Days to Ship: 9 Day(s) or more -
Junron Stainless Steel Fitting Service Tee
JUNKOSHA
Usable across a broad temperature range. Wear on tubing due to over tightening of the cap nut, etc. is eliminated.
[Features]
· As the product consists of SUS316, which has good corrosion resistance properties, it can be used in a wide temperature range from low to high.
· Designed specially for fluorine polymer/nylon resin tubes to ensure that the tube does not rupture due to excessive tightening of the cap nut, etc.
· No abnormalities are allowed in the connected part unless the tube ruptures.
· The tightening torque of the cap nut does not need to be managed.
Fitting uses SUS316, so it is rust resistant.- CAD ：
- 2D
Standard Price: MYR 384.17- Days to Ship: 9 Day(s) or more -
Junlon Stainless Steel Fitting Female Nipple
JUNKOSHA
Usable across a broad temperature range. No wear and tear to tubing as a result of an over tightening of cap nut, etc. No abnormality in the connected part unless the tube is ruptured. Does not require management of cap nut tightening torque.
- CAD ：
- 2D
Standard Price: MYR 189.41- Days to Ship: 9 Day(s) or more -
US2 Series Nipple for Flexible Tubes Made Up of Junlon Stainless Steel
JUNKOSHA
[Features]
・ It is a stainless steel fitting for flexible tubes such as Junron U tubes and THV tubes
・ The cap nut with a built-in sleeve that uses a unique mechanism has eliminated the twisting of the tube during piping.
・ No need to control the tightening torque of the cap nut- CAD ：
- 2D
Standard Price: MYR 173.46 Days to Ship: 11 Day(s) or more -
Junron Stainless Fitting US2 Series Elbow for Flexible Tubes
JUNKOSHA
Stainless steel fittings for flexible tubing. To resolve snaking during piping, we use cap nuts built into the sleeve that use a mechanism unique to our company. Does not require management of cap nut tightening torque.
- CAD ：
- 2D
Standard Price: MYR 239.87- Days to Ship: 9 Day(s) or more -
Quick Seal Series Insert Type (Brass Specifications) Tee (Metric Size)
NITTA
Brass specification tee (millimeter size) fitting includes three components: the main body, , nuts and sleeve(s) in an integrated package. Also features excellent negative pressure performance.
[Features]
· Screw-in type.
· Three parts included: fitting body, nuts and sleeve(s).
· Demonstrates excellent sealing performance.
· Fitting body and insert are integrated.
· Also features excellent performance under negative pressure.
· Only the connectors are sealed.
· Does not require sealing tape.
Compliant with JISB8381-1995 (pipe fitting for a flexible hose for pneumatic use)- CAD ：
- 2D
Standard Price: MYR 78.05- Days to Ship: 7 Day(s) or more -
Quick Seal Series Insert Type (Brass) Service Tee (mm Size)
NITTA
It consists of three parts: brass fitting body of service tee (mm size), nut, and sleeve, and fitting body and insert are integrated. Also, it is excellent in negative pressure performance.
- CAD ：
- 2D
Standard Price: MYR 87.66 Days to Ship: 7 Day(s) or more -
Quick Seal Series Insert Type (Brass Specifications) Female Connector (Metric Size)
NITTA
A brass female connector (millimeter sized) with integrated body, nut, and sleeve. The fitting body and insert are integrated. Provides excellent performance at negative pressures.
- CAD ：
- 2D
Standard Price: MYR 50.85 Days to Ship: 7 Day(s) or more -
Quick Seal Series Insert Type (Stainless Steel Specification) Connector (Metric Size)
NITTA
[Features]
・ It is a threaded type
・ 3 point type of body, nut and sleeve
・ Delivers strong sealing performance
・ Body and insert are integrated
・ Excellent negative pressure performance
・ Since it is made of SUS304, it has excellent corrosion resistance
・ JIS B 8381-1995 (pneumatic flexible pipe fittings) compliant product
・ Excellent pressure resistance and vibration resistance- CAD ：
- 2D
Standard Price: MYR 215.20 Days to Ship: 5 Day(s) or more -
Quick Seal Series Insert-Less Type Connector
NITTA
Consists of three parts: connector fitting unit, nut, and sleeve. The effective cross-sectional area is larger without an insert.
[Features]
· Screw-in type.
· 3 parts: fitting unit, nut, and sleeve.
· Guarantees a high flow rate.
· Has no insert, giving it a wider cross-section.
· Only the connectors are sealed, so there is no need to wrap them with sealing tape.- CAD ：
- 2D
Standard Price: MYR 54.07 Days to Ship: 7 Day(s) or more -
Quick Seal Series Insert-Less Type 90° Elbow
NITTA
90° elbow consisting of three parts: fitting body, nut, and sleeve. The effective sectional area is larger without insert.
[Features]
· Screw-in type.
· Three parts: fitting body, nut, and sleeve.
· High flow rate can be maintained.
· Only connectors are sealed.
· Does not require sealing tape.- CAD ：
- 2D
Standard Price: MYR 65.30 Days to Ship: 7 Day(s) or more -
Quick Seal Series - Exclusive Nylon Coil Tube Type - FS Swivel Nut Female Connector
NITTA
[Features]
· Screw-in type.
· 3 parts: fitting body, nut and sleeve.
· Fitting designed for nylon coil tubes.- CAD ：
- 2D
Standard Price: MYR 100.16 Days to Ship: 7 Day(s) or more -
Quick Seal Series Insert Type (Stainless Steel Type) 90° Elbow (Size in Inches)
NITTA
[Features]
・ It is a threaded type
・ 3 point type of body, nut and sleeve
・ Delivers strong sealing performance
・ Body and insert are integrated
・ Excellent negative pressure performance
・ Since it is made of SUS304, it has excellent corrosion resistance
・ JIS B 8381-1995 (pneumatic flexible pipe fittings) compliant product- CAD ：
- 2D
Standard Price: MYR 248.45 Days to Ship: 5 Day(s) or more -
Quick-Seal Series, Insert Type (Stainless Steel Specifications) Connector (Inch Size)
NITTA
[Features]
・ It is a threaded type
・ 3 point type of body, nut and sleeve
・ Delivers strong sealing performance
・ Body and insert are integrated
・ Excellent negative pressure performance
・ Since it is made of SUS304, it has excellent corrosion resistance
・ JIS B 8381-1995 (pneumatic flexible pipe fittings) compliant product- CAD ：
- 2D
Standard Price: MYR 83.86 Days to Ship: 5 Day(s) or more -
Chemifit CP Series, 90° Elbow【5 Pieces Per Package】
NITTA
Inner surface of 90° elbow is smooth due to injection molding. Also, it is excellent in non-dusting and non-polluting. A special polypropylene resin is used as a base material.
- CAD ：
- 2D
Standard Price: MYR 139.49 Days to Ship: 7 Day(s) or more -
Chemifit CP Series Connector【5 Pieces Per Package】
NITTA
[Features]
・ Threaded fitting made of polypropylene resin
・ Lightweight
・ Completely degrease-processed product
・ Parts are washed in a cleanroom
・ Excellent inner surface smoothness
・ Injection molded product, so the inner surface is smooth
・ Excellent dust-free and non-polluting property
・ Made of special polypropylene resin
・ Compliant with Ministry of Health, Labour and Welfare of Japan Notification No. 201 (2006) and Ministry of Health, Labour and Welfare Notification No. 370 (1959)- CAD ：
- 2D
Standard Price: MYR 133.15 Days to Ship: 5 Day(s) or more -
Insert Fittings KF Series, Branch Tee KFT
SMC
[Applications]·Used for branch connections at 90° angles from female threads on both sides. [Materials]·C3604+C3771.
Days to Ship: 14 Day(s) or more -
Insert Fittings KF Series, Male Run Tee KFY
SMC
It can be used for branch piping in the same direction from the female thread and in 90° direction.
Days to Ship: 14 Day(s) or more -
Insert Fittings KF Series, Swivel Elbow KFV
SMC
[Features]
· Used for pipework proceeding at a right angle from a female thread.
· A swivel type that can be positioned in any direction.Days to Ship: 3 Day(s) or more -
Insert Fittings KF Series, Swivel Extended Elbow KFW
SMC
[Features]
· Used for piping in directions perpendicular to the female thread.
· Extended swivel type that can swivel in any direction, facilitating three-dimensional piping.Days to Ship: 17 Day(s) or more -
SUS316, Insert Pipe Fitting, KFG2 Series, Female Union
SMC
[Features]
・ Compact and weight reduced
・ Lubrication-free
·Steam can be used
· Compliant with the Food Sanitation Act of JapanStandard Price: MYR 153.04 Days to Ship: 14 Day(s) or more -
Self-Align Fittings H/DL/L/LL Series Male Run Tee DY
SMC
Self-aligning type pipe fittings by SMC Corporation.
[Features]
· Can be used with soft copper pipes.
· A non-directional type metal sleeve.
· The sleeve helps protect against external damage.
· Low pressure loss.
[Applications]
· Used for 90° branch connections in both directions.Days to Ship: 14 Day(s) or more -
Self-Align Fittings H/DL/L/LL Series Swivel Elbow L
SMC
A tightening-type fitting with a strong edge, ensuring external damage will not easily lead to impaired functionality.
[Features]
· A non-directional type sleeve.
· The sleeve helps protect against external damage.
· Low pressure loss.
· A swivel type that can be positioned in any direction.
[Applications]
· Used for right-angle piping from female threads.Standard Price: MYR 32.17- Days to Ship: 14 Day(s) or more -
Self-Align Fittings H/DL/L/LL Series Swivel Extended Elbow LL
SMC
A tightening-type fitting with a strong edge, ensuring external damage will not easily lead to impaired functionality.
[Features]
· A non-directional type sleeve.
· The sleeve helps protect against external damage.
· Low pressure loss.
· An extendable swivel type that can be positioned in any direction.
· Allows for three-dimensional piping.
[Applications]
· Used for right-angle piping from female threads.Standard Price: MYR 34.30- Days to Ship: 14 Day(s) or more
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Material |
| Type |
| Connection Types |
| Connection Type |
| Nominal of Thread |
| Screw-to-Tube Connection Shape |
| Tube Outer Dia.(mm) |
| Screw Type |
| Tube-to-Tube Connection Shape |
| Screw Types |
| Tube Inner Dia.(mm) |
| Related Components, Shapes, Types |
| Screw-to-Tube Multipoint Connection Shape |
| Surface Treatment |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | JUNKOSHA | JUNKOSHA | JUNKOSHA | JUNKOSHA | JUNKOSHA | JUNKOSHA | JUNKOSHA | NITTA | NITTA | NITTA | NITTA | NITTA | NITTA | NITTA | NITTA | NITTA | NITTA | NITTA | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC |
| Product Series | US2 Series Nipple for Flexible Tubes Made Up of Junlon Stainless Steel | Junron Stainless Fitting US2 Series Elbow for Flexible Tubes | Quick Seal Series Insert Type (Brass Specifications) Tee (Metric Size) | Quick Seal Series Insert Type (Brass Specifications) Female Connector (Metric Size) | Quick Seal Series Insert Type (Stainless Steel Specification) Connector (Metric Size) | Quick Seal Series - Exclusive Nylon Coil Tube Type - FS Swivel Nut Female Connector | Quick Seal Series Insert Type (Stainless Steel Type) 90° Elbow (Size in Inches) | Quick-Seal Series, Insert Type (Stainless Steel Specifications) Connector (Inch Size) | Self-Align Fittings H/DL/L/LL Series Swivel Extended Elbow LL | |||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Days to Ship | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 11 Day(s) or more | 9 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 5 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 7 Day(s) or more | 5 Day(s) or more | 14 Day(s) or more | 14 Day(s) or more | 3 Day(s) or more | 17 Day(s) or more | 14 Day(s) or more | 14 Day(s) or more | 14 Day(s) or more | 14 Day(s) or more |
| Material | Copper | Copper | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Copper | Copper | Copper | Stainless Steel | Copper | Copper | Copper | Stainless Steel | Stainless Steel | Plastic | Plastic | Copper | Copper | Copper | Copper | Stainless Steel | Copper | Copper | Copper |
| Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Connection Types | Screw <=> Tube Multipoint Connection | Screw <=> Tube Multipoint Connection | Screw <=> Tube Multipoint Connection | Screw <=> Tube Multipoint Connection | Screw <=> Tube Connection | Screw <=> Tube Connection | Screw <=> Tube Connection | Screw <=> Tube Multipoint Connection | Screw <=> Tube Multipoint Connection | Screw <=> Tube Connection | Screw <=> Tube Connection | Screw <=> Tube Connection | Screw <=> Tube Connection | Screw <=> Tube Connection | Screw <=> Tube Connection | Screw <=> Tube Connection | Screw <=> Tube Connection | Screw <=> Tube Connection | Screw <=> Tube Multipoint Connection | Screw <=> Tube Multipoint Connection | Screw <=> Tube Connection | Screw <=> Tube Connection | Screw <=> Tube Connection | Screw <=> Tube Multipoint Connection | Screw <=> Tube Connection | Screw <=> Tube Connection |
| Connection Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Nominal of Thread | 1/2 | 1/2 | 1/2 | 1/2 | 1/2 | 1/2 | 1/2 | 1/2 | 1/2 | 1/2 | 1/2 | 1/2 | 1/2 | 1/2 | 1/2 | 1/2 | 1/2 | 1/2 | 1/2 | 1/2 | 1/2 | 1/2 | 1/2 | 1/2 | 1/2 | 1/2 |
| Screw-to-Tube Connection Shape | - | - | - | - | Female Straight | Male Straight | Elbows | - | - | Female Straight | Male Straight | Male Straight | Elbows | Male Straight | Elbows | Male Straight | Elbows | Male Straight | - | - | Elbows | Elbows | Female Straight | - | Elbows | Elbows |
| Tube Outer Dia.(mm) | 12 ～ 12.7 | 12 ～ 12.7 | 10 ～ 12 | 10 ～ 12 | 10 ～ 12 | 10 ～ 12 | 10 ～ 12 | 10 ～ 16 | 12 | 12 | 12 | 12 | 12 | - | 12.7 | 12.7 | 12 ～ 12.7 | 12 ～ 12.7 | 10 ～ 12 | 10 ～ 12 | 10 ～ 12 | 10 ～ 12 | 16 | 10 ～ 12 | 10 ～ 12 | 10 ～ 12 |
| Screw Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Tube-to-Tube Connection Shape | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Screw Types | R | R | R | R | Rc | R | R | R | R | Rc | R | R | R | G | R | R | R | R | R | R | R | R | Rc | R | R | R |
| Tube Inner Dia.(mm) | 8 ～ 9.56 | 8 ～ 9.56 | 7.5 ～ 10 | 7.5 ～ 10 | 7.5 ～ 10 | 6.5 ～ 8 | 6.5 ～ 8 | 8 ～ 13 | 9 | 9 | 8 ～ 9 | - | - | - | - | - | - | - | 6.5 ～ 9 | 6.5 ～ 9 | 6.5 ～ 9 | 6.5 ～ 9 | 13 | - | - | - |
| Related Components, Shapes, Types | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Screw-to-Tube Multipoint Connection Shape | Tees | Tees | Tees | Tees | - | - | - | Tees | Tees | - | - | - | - | - | - | - | - | - | Tees | Tees | - | - | - | Tees | - | - |
| Surface Treatment | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | - | Not Provided | Not Provided | Not Provided | Not Provided / Nickel Plating | Not Provided / Nickel Plating | Not Provided / Nickel Plating | Not Provided / Nickel Plating | Not Provided | Not Provided / Nickel Plating | Not Provided | Not Provided |
Loading...
Configure
Specification/Dimensions
-
Material
-
Type
-
Straight
-
-
Connection Types
- Screw <=> Tube Connection
- Screw <=> Tube Multipoint Connection
- Tube <=> Tube Equal Dia. Connection
- Related Components
-
Connection Type
- Pipe < = > Thread
-
Nominal of Thread
-
Screw-to-Tube Connection Shape
- Elbows
- Male Straight
- Female Straight
-
Tube Outer Dia.(mm)
-
Screw Type
- R
-
Tube-to-Tube Connection Shape
- Straight
- Elbows
- Tees
- Partition Unions
-
Screw Types
- R
- Rc
- G
- M
- NPT
-
Tube Inner Dia.(mm)
-
Related Components, Shapes, Types
- Plugs
- Gaskets
- Nuts
- Bushings
- Sockets
- Sleeves
- Inserts
- Other Related Components
-
Screw-to-Tube Multipoint Connection Shape
- Tees
- Manifolds
-
Surface Treatment
- Not Provided
- Nickel Plating
Narrow search by specifying Manufacturer
-
- SMC (17)
- NITTA (16)
- JUNKOSHA (14)
- PISCO (12)
- CHIYODA (6)
- AOI (1)
- FESTO (0)
- TRUSCO NAKAYAMA (0)
CAD
-
- 2D
- 3D
Related Categories to Tightening Fittings
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy