(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Hands, Grippers（Operation Method：Single Acting Type (Normally Open)）
| Days to Ship |
|
|---|
-
Air Gripper, Parallel Type / Standard Type MHZ2 Series
SMC
SMC Parallel Type Air Gripper.
[Features]
· Uses a linear guide for high rigidity and high precision.Standard Price: MYR 840.83- Days to Ship: 3 Day(s) or more -
Parallel Type Air Gripper, Long Stroke MHZL2 Series
SMC
[Features]
· Accommodates diverse workpiece diameters with a single unit.
· Nearly double the standard stroke.
· Long stroke, yet also compact and lightweight.Standard Price: MYR 984.44- Days to Ship: 3 Day(s) or more -
Hand Small Crossed Roller Parallel Hand BHG Series
KONDO
Cross roller parallel hand with rubber cover.
[Features]
· Improves environment resistant by attaching a rubber cover to prevent invasion of mist and dust.
· Cross roller bearing holding mechanism is used in the sliding area.
· Smooth movement.with high precision.
· Endures compact and large moment load by over wrapping and long holding mechanism.
· Supports clean room.
· Supports class 10 and class 1000Standard Price: MYR 1,637.60- Days to Ship: 22 Day(s) or more -
Parallel Type Air Gripper, 3-Finger Type, MHS3 Series
SMC
[Features]
· Lightweight and compact design with reduced height.
· High repeatability: ±0.01 mm.
· Can be equipped with an auto switch.
· Easy alignment when mounting the main body.
· Can be mounted from 2 directions.
· Utilizes wedge cam construction.
· Can be equipped with a small auto switch.Standard Price: MYR 2,290.27- Days to Ship: 27 Day(s) or more -
SMC
Rotary gripper suitable for holding and reversing workpieces on transfer lines.
[Features]
· Compact integration of gripping with rotation functions.
· Eliminates whirling of the piping and wiring caused by combining individual products (rotary table + adapter + air gripper).
· Compared with combined products, the longitudinal dimension is approximately 20% shorter.
· 2 types of angle rotation (90° and 180°) are now standard.
· Auto switches can be retrofitted using the magnet (equipped as standard).Standard Price: MYR 2,470.87- Days to Ship: 9 Day(s) or more -
Air Gripper, Angular Type / Standard Type MHC2 Series
SMC
SMC Angular Type Air Gripper.
[Features]
· A compact design in which a large amount of gripping force is provided through the use of a double piston mechanism.
· Built-in variable throttle.
· A solid state auto switch with an indicator light can be mounted.Standard Price: MYR 527.27- Days to Ship: 9 Day(s) or more -
Angular Type Air Gripper MHC2-6/MHCA2-6 Series
SMC
[Features]
· MHC2-6□: Can be equipped with a small auto switch.
· · MHCA2-6□: Short body type with reduced overall length.Standard Price: MYR 410.76- Days to Ship: 3 Day(s) or more -
MEG
[Features]
・ Gripping is stable even if it is extremely short
・ Small size but long lifespan
・ Features a light and twist-free operation
・ Ultra-short and high accuracy
・ A parallel opening/closing chuck that has a short body shape, has little overhang, and can be used in narrow spaces.
・ It can be mounted using the mounting holes on the main body- CAD ：
- 2D
Standard Price: MYR 1,119.74- Days to Ship: 9 Day(s) or more -
MISUMI
A space saving, compact air chuck with high precision, high stiffness, and strong gripping force.
Standard Price: MYR 542.86- Days to Ship: 1 Day(s) or more -
Wide Angle Grippers, High Gripping, HJD Series
CKD
CKD Gripper Chuck High Gripping Type Wide Angle Gripper HJD Series.
Standard Price: MYR 1,540.87- Days to Ship: 11 Day(s) or more -
Days to Ship: 32 Day(s) -
Parallel hand ultra-compact cross roller hand BSA2 series
CKD
Supports handling with a large selection including thin, light weight, wide stroke, high precision types, etc. Note: CAD data of this series is being revised. Please wait till the corrections are done.
- CAD ：
- 2D
Days to Ship: 21 Day(s) or more -
Hand Crossed Roller Parallel Hand HK Series
KONDO
Smooth operation with bearing mechanism.
[Features]
· High precision and smooth operation with the cross roller guide.
· Cross roller bearing mechanism is used for the slide part.
· Smooth movement.with high precision.
· Compact and high rigidity.
· Endures compact and large moment load by over wrapping and long holding mechanism.
· Improves resistant environment with rubber cover (option).
· Prevents mist and dust invasion by installing the rubber cover with the slide part and increases the resistance to environment
· Sensor supported cutting oil resistant can be mounted.
· Supplied brackets are not needed.Standard Price: MYR 3,006.11- Days to Ship: 22 Day(s) or more -
Parallel Open/Close Type Air Chuck Standard Type Compact (Without Auto Switch) MHZA/MHZAJ2-6 Series
SMC
· Uses a linear guide for high rigidity and high precision.
Standard Price: MYR 879.31- Days to Ship: 3 Day(s) or more -
Parallel Type Air Gripper With Dust Cover MHZJ2 Series
SMC
[Features]
· Prevents the ingress of cutting chips, dust, water, etc.
· Prevents dispersion of grease, and external leakage of dust.Standard Price: MYR 1,013.41- Days to Ship: 3 Day(s) or more -
MEG
[Features]
・ The originator of the parallel open/close chuck. Achieves compact size, high grip, and long lifespan with a unique mechanism
・ Stable grip performance
・ Light operation and excellent high-speed response performance
・ Precise installation adjustment
・ Sensors are available for both double-acting and single action- CAD ：
- 2D
Standard Price: MYR 1,119.62- Days to Ship: 9 Day(s) or more -
MEG
[Features]
・ 3 types of cylinder diameters ø8, ø12, and ø18 are available for single action, double-acting, and mechanical. You can choose according to the application
・ Wide range of holding specifications with one body. Can be used for both outer and inner diameter grips by simply changing the position of the claws- CAD ：
- 2D
Standard Price: MYR 706.27- Days to Ship: 7 Day(s) or more -
Parallel Hand, Small Cross Roller Hand, BHA/BHG Series
CKD
Supports handling with a large selection including thin, light weight, wide stroke, high precision types, etc. Note: CAD data of this series is being revised. Please wait till the corrections are done.
Days to Ship: 25 Day(s) or more -
Gripper, Chuck Powerful Chuck CKL Series
KONDO
Low price even with think, light weighted compact and high holding force.
Standard Price: MYR 2,448.02- Days to Ship: 22 Day(s) or more -
Gripper, Chuck Long Stroke Chuck CK/CKB/CKD Series
KONDO
Full handling chuck focused on strokes.
[Features]
· Long running stroke of nail and no need to adjust it.
· There are 3 way claws, CK type, 2 way claws, CKB type and 4 CKD type.
· Body has light weight and compact design to deal with and has strong holding force- CAD ：
- 2D
Standard Price: MYR 4,076.65- Days to Ship: 27 Day(s) or more -
KONDO
Cam type without combination adjustment need.
[Features]
· Special cam type without combination adjustment need.
· Parallel movement: Parallel type with bearing and special cam and efficient holding force with 15% increase.
· Long running stroke: Light weight and compact design with long combination range of 8 mm stroke for easy handling.Standard Price: MYR 1,644.75- Days to Ship: 22 Day(s) or more -
Linear Slide Hand LSH-HP Series
CKD
[Features]
・ By increasing the guide stiffness compared to the conventional product, the allowable moment has been increased
・ High stiffness and high accuracy has been achieved due to the integrated structure of the guide rail and finger
・ Optimized seal design. The sliding technology has been mastered to achieve double the durability of conventional products
・ Centering accuracy can be easily reproduced by adding a "positioning hole" based on the gripping center
・ The rail plate allows the switch to be replaced with the hand attached to the robot / equipmentStandard Price: MYR 1,720.11- Days to Ship: 26 Day(s) or more -
MEG
Wide range of holding specifications with 1 body. Depending on where the jaws are attached, it is possible to grip the outer diameter and inner diameter.
- CAD ：
- 2D
Standard Price: MYR 655.81- Days to Ship: 9 Day(s) or more -
MEG
Highest gripping strength in the industry with industry lightest and 4 mm strokes (our own research)
- CAD ：
- 2D
Standard Price: MYR 655.41- Days to Ship: 4 Day(s) or more -
MEG
[Features]
・ Only 10-mm thickness, and weight of 20 g
・ "Ultra-compact" 2-jaw parallel opening/closing chuck that is as small as a little finger
・ Delicate like tweezers
・ Strong against speeding up and easy to handle
・ Minimal and flat. The manufacturer has achieved to make it extremely small- CAD ：
- 2D
Standard Price: MYR 1,119.68 Days to Ship: 4 Day(s) or more -
Gripper, Closed Chuck Shank Type
PISCO
[Features]
· Stainless steel air chuck with light weight and super small.
· Stable chucking with work stopper.
· Floating type can use the work stopper more effectively and prevents damages with thrust.
· Claw shape: The K type has crude claw blanks.
· No need to worry about misalignment with R alignment- CAD ：
- 2D
Standard Price: MYR 426.37- Days to Ship: 4 Day(s) or more -
PISCO
[Features]
· Stainless steel air chuck with light weight and super small.
· Stable chucking with work stopper.
· Floating type can use the work stopper more effectively and prevents damages with thrust.
· Claw shape: The K type has crude claw blanks.
· No need to worry about misalignment with R alignment- CAD ：
- 2D
Standard Price: MYR 446.94- Days to Ship: 9 Day(s) or more -
Closed Chuck, Floating Attachment Panel Mount Type, Chuck Direction Perpendicular
PISCO
[Features]
· Stainless steel air chuck with light weight and super small.
· Stable chucking with work stopper.
· Floating type can use the work stopper more effectively and prevents damages with thrust.
· Claw shape: The K type has crude claw blanks.
· No need to worry about misalignment with R alignment- CAD ：
- 2D
Standard Price: MYR 580.97- Days to Ship: 10 Day(s) or more -
Three-Way Jaw Thin Chuck CKA Series
CKD
Supports handling with a large selection including thin, light weight, wide stroke, high precision types, etc. Note: CAD data of this series is being revised. Please wait till the corrections are done.
Days to Ship: 27 Day(s) or more -
Gripper, Closed Chuck Shank Type (2-Screw Mounting Method)
PISCO
[Features]
· Stainless steel air chuck with light weight and super small.
· Stable chucking with work stopper.
· Floating type can use the work stopper more effectively and prevents damages with thrust.
· Claw shape: The K type has crude claw blanks.
· No need to worry about misalignment with R alignment- CAD ：
- 2D
Standard Price: MYR 426.37- Days to Ship: 10 Day(s) or more -
Standard Price: MYR 3,171.86- Days to Ship: 27 Day(s) or more -
KONDO
Hollow type and multi-function embedded. In addition, light weight and compact design.
Standard Price: MYR 3,228.41- Days to Ship: 27 Day(s) or more -
Closed Chuck Panel Mount Type with Floating Chuck Direction Parallel
PISCO
Stainless steel air chuck with light weight and super small.
[Features]
· Stainless steel air chuck with light weight and super small.
· Stable chucking with work stopper.
· Floating type can use the work stopper more effectively and prevents damages with thrust.
· Claw shape: The K type has crude claw blanks so you don't need to worry about misalignment with R alignment- CAD ：
- 2D
Standard Price: MYR 580.97- Days to Ship: 10 Day(s) or more -
Closing Chuck Block Type With Floating Chuck Direction Parallel
PISCO
[Features]
· Stainless steel air chuck with light weight and super small.
· Stable chucking with work stopper.
· The type with floating can use the work stopper more effectively and prevents the damages caused by thrusting.
· Claw shape: The K type has crude claw blanks.
· No need to worry about misalignment with R alignment- CAD ：
- 2D
Standard Price: MYR 760.84 Days to Ship: 9 Day(s) or more -
Closed Chuck, Floating Attachment Block Type, Chuck Direction Perpendicular
PISCO
Stainless steel air chuck with light weight and super small.
- CAD ：
- 2D
Standard Price: MYR 668.60- Days to Ship: 10 Day(s) or more -
CKD
Supports handling with a large selection including thin, light weight, wide stroke, high precision types, etc. Note: CAD data of this series is being revised. Please wait till the corrections are done.
- CAD ：
- 2D
Days to Ship: 23 Day(s) or more -
Crossed Roller Parallel Hand HKP Series
CKD
Supports handling with a large selection including thin, light weight, wide stroke, high precision types, etc. Note: CAD data of this series is being revised. Please wait till the corrections are done.
- CAD ：
- 2D
Days to Ship: 27 Day(s) or more -
Parallel Hand, Linear Guide Hand, LHA Series
CKD
Supports handling with a large selection including thin, light weight, wide stroke, high precision types, etc. Note: CAD data of this series is being revised. Please wait till the corrections are done.
- CAD ：
- 2D
Days to Ship: 17 Day(s) or more -
Wide-angle Hand Fulcrum Hand HBL Series
CKD
Supports handling with a large selection including thin, light weight, wide stroke, high precision types, etc. Note: CAD data of this series is being revised. Please wait till the corrections are done.
Days to Ship: 24 Day(s) or more -
Gripper, Thin Chuck CKA/CKB/CKD Series
KONDO
Body is light weight and compact to deal with. And powerful handling design. Select from 3 types of nails depending on its usage.
[Features]
· Long running stroke of nail and no need to adjust it.
· Has 3 way claws, CKA type, 2 way claws, CKB type, and 4 way claws, CKD type.
· Body has light weight and compact design to deal with and has strong holding forceStandard Price: MYR 1,758.12- Days to Ship: 27 Day(s) or more -
Hand mini parallel hand HMA series
KONDO
Compact size with light weight and small.
[Features]
· Compact size with light weight and small.
· Compact body with integration.
· Simplified with cylinder integrated structure.
· Lower price.
· Wide variety.
· HMA5 models (ø10, ø12, ø16, ø20, ø25) have been added, along with other series, for a total of 24 models ranging in cylinder diameters of between ø10 and ø100.
· Supports any works.
· Wide range of options.
· Can mount switch confirming open/closeStandard Price: MYR 1,185.20- Days to Ship: 22 Day(s) or more -
Hand mini one fulcrum hand HMB series
KONDO
Low cost, small, light weight and compact.
[Features]
· Low cost, small, light weight and compact.
· Compact body with integration.
· Simplified with cylinder integrated structure.
· Lower price.
· Wide variety.
· HMB4 models have been added, making a total of 10 available models ranging in cylinder diameters of between ø10 and ø40.
· Wide range of options.
· You can choose the body color based on the machine body (standard is calm dark brown) and you can mount a switch confirming open/close.
· Sensor confirming open/close.
· Mounting switch in 2 locations with all models of the series.Standard Price: MYR 800.67- Days to Ship: 27 Day(s) or more -
KONDO
Hand pursued by high resistance associated with speeding up the equipment.
[Features]
· Hand pursued by high resistance associated with speeding up the equipment.
· High rigidity, high precision, and long life by adopting an unity form of linear guide.
· Supports long nails.
· Supports low sliding (option).
· Centering precision ±0.05 mm (option).
· Supports rubber cover (option).
· New L1 series with running stroke doubledStandard Price: MYR 1,677.19- Days to Ship: 27 Day(s) or more -
Hand long stroke parallel hand HG series
KONDO
Stroke focused and full force with light weight and compact.
[Features]
· Stroke focused and full force with light weight and compact.
· Super long stroke hand.
· Super long stroke by increasing cam ratio.
· Light weight and compact.
· Light weight and compact body.
· Thin for easy handling.
· Easy mounting.
· Mounting from any direction with 3 directions of mounting surface.
· Sensor confirming open/close.
· Mounting switch in 2 locations with all models of the seriesStandard Price: MYR 3,560.30- Days to Ship: 27 Day(s) or more -
Hand ultra small cross-roller parallel hand BSA series
KONDO
Super small type with multiple mountings.
[Features]
· Super small type with multiple mountings.
· Super small parallel hand: Overall length of 50 mm.
· Width of 25 mm.
· Super small type with only 10 mm of thinness.
· Suitable with delivery and assembly of small work.
· Easy mounting: Side surface mounting (tap and run through hole) and top surface mounting (tap).
· Multiple mounting where multiple works are locked at the same time.
· High precision and smooth operation with cross roller guide: Cross roller guide is used in the slide part.
· High precision and smooth operation with pre-load and without rattle.Standard Price: MYR 1,196.51- Days to Ship: 27 Day(s) or more
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Number of Fingers |
| Main Body Shape |
| Gripping Methods |
| Operation Method |
| Open Dimension L1(mm) |
| Closed Dimension L2(mm) |
| Type |
| Gripping Force (when 0.5Mpa at closing)(N) |
| Gripping Force (when 0.5Mpa at opening)(N) |
| Maximum Gripping Force (Opening Side, Electric Type)(N) |
| Maximum Gripping Force (Closing Side, Electric Type)(N) |
| Environment, Applications |
| Additional Functions |
| Stroke Adjustment Mechanism |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | SMC | SMC | KONDO | SMC | SMC | SMC | SMC | MEG | MISUMI | CKD | FESTO | CKD | KONDO | SMC | SMC | MEG | MEG | CKD | KONDO | KONDO | KONDO | CKD | MEG | MEG | MEG | PISCO | PISCO | PISCO | CKD | PISCO | KONDO | KONDO | PISCO | PISCO | PISCO | CKD | CKD | CKD | CKD | KONDO | KONDO | KONDO | KONDO | KONDO | KONDO |
| Product Series | Parallel Open/Close Type Air Chuck Standard Type Compact (Without Auto Switch) MHZA/MHZAJ2-6 Series | Closed Chuck, Floating Attachment Panel Mount Type, Chuck Direction Perpendicular | Closed Chuck Panel Mount Type with Floating Chuck Direction Parallel | Closing Chuck Block Type With Floating Chuck Direction Parallel | Closed Chuck, Floating Attachment Block Type, Chuck Direction Perpendicular | ||||||||||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
| Days to Ship | 3 Day(s) or more | 3 Day(s) or more | 22 Day(s) or more | 27 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 3 Day(s) or more | 9 Day(s) or more | 1 Day(s) or more | 11 Day(s) or more | 32 Day(s) | 21 Day(s) or more | 22 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more | 9 Day(s) or more | 7 Day(s) or more | 25 Day(s) or more | 22 Day(s) or more | 27 Day(s) or more | 22 Day(s) or more | 26 Day(s) or more | 9 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 9 Day(s) or more | 10 Day(s) or more | 27 Day(s) or more | 10 Day(s) or more | 27 Day(s) or more | 27 Day(s) or more | 10 Day(s) or more | 9 Day(s) or more | 10 Day(s) or more | 23 Day(s) or more | 27 Day(s) or more | 17 Day(s) or more | 24 Day(s) or more | 27 Day(s) or more | 22 Day(s) or more | 27 Day(s) or more | 27 Day(s) or more | 27 Day(s) or more | 27 Day(s) or more |
| Number of Fingers | 2 pcs. | 2 pcs. | 2 pcs. | 3 pcs. | 2 pcs. | 2 pcs. | 2 pcs. | 2 pcs. | 2 pcs. | 2 pcs. | - | 2 pcs. | 2 pcs. | 2 pcs. | 2 pcs. | 2 pcs. | 2 pcs. | 2 pcs. | 3 pcs. | 3 pcs. | 2 pcs. | 2 pcs. | 2 pcs. | 2 pcs. | 2 pcs. | 2 pcs. | 2 pcs. | 2 pcs. | 3 pcs. | 2 pcs. | 3 pcs. | 3 pcs. | 2 pcs. | 2 pcs. | 2 pcs. | 3 pcs. | 2 pcs. | 2 pcs. | 2 pcs. | 3 pcs. | 2 pcs. | 2 pcs. | 2 pcs. | 2 pcs. | 2 pcs. |
| Main Body Shape | Square Shape / Square Shape (Flat Shape) | Square Shape / Square Shape (Flat Shape) | Square Shape | Cylindrical Shape | Cylindrical Shape | Square Shape | Square Shape | Cylindrical Shape | Square Shape | Square Shape | - | Square Shape | Square Shape | Square Shape / Square Shape (Flat Shape) | Square Shape | Cylindrical Shape | Square Shape | Square Shape | Special Shape | Special Shape | Square Shape / Cylindrical Shape | Square Shape | Square Shape | Square Shape | Cylindrical Shape | Cylindrical Shape | Cylindrical Shape | Cylindrical Shape | Cylindrical Shape | Cylindrical Shape | Special Shape | Hollow Shape | Cylindrical Shape | Cylindrical Shape | Cylindrical Shape | Hollow Shape | Square Shape | Square Shape | Square Shape | Special Shape | Square Shape | Square Shape | Square Shape | Square Shape | Square Shape |
| Gripping Methods | Pinch, Parallel Type / Pinch, Chuck Type / Open, Parallel Type | Pinch, Parallel Type / Pinch, Chuck Type | Pinch, Parallel Type | Pinch, Chuck Type | Pinch, Parallel Type / Pinch, Chuck Type | Pinch, Swing Type / Open, Swing Type | Pinch, Parallel Type / Pinch, Swing Type | Pinch, Parallel Type | Pinch, Parallel Type / Open, Parallel Type | Pinch, Swing Type | - | Pinch, Parallel Type / Open, Parallel Type | Pinch, Parallel Type | Pinch, Parallel Type / Pinch, Chuck Type | Pinch, Parallel Type / Open, Parallel Type | Pinch, Parallel Type | Pinch, Parallel Type / Open, Parallel Type / Mechanical Hand | Pinch, Parallel Type / Open, Parallel Type | Pinch, Chuck Type | Pinch, Chuck Type | Pinch, Parallel Type | Pinch, Parallel Type | Pinch, Parallel Type / Open, Parallel Type / Mechanical Hand | Pinch, Parallel Type / Open, Parallel Type | Pinch, Parallel Type | Pinch, Swing Type | Pinch, Swing Type | Pinch, Swing Type | Pinch, Chuck Type / Open, Chuck Type | Pinch, Swing Type | Pinch, Chuck Type | Pinch, Chuck Type | Pinch, Swing Type | Pinch, Swing Type | Pinch, Swing Type | Pinch, Chuck Type / Open, Chuck Type | Pinch, Parallel Type / Open, Parallel Type | Pinch, Parallel Type / Open, Parallel Type | Pinch, Swing Type / Open, Swing Type | Pinch, Chuck Type | Pinch, Parallel Type | Pinch, Swing Type | Pinch, Parallel Type | Pinch, Parallel Type | Pinch, Parallel Type |
| Operation Method | Single Acting Type (Normally Open) | Single Acting Type (Normally Open) | Single Acting Type (Normally Open) | Single Acting Type (Normally Open) | Single Acting Type (Normally Open) | Single Acting Type (Normally Open) | Single Acting Type (Normally Open) | Single Acting Type (Normally Open) | Single Acting Type (Normally Open) | Single Acting Type (Normally Open) | Single Acting Type (Normally Open) | Single Acting Type (Normally Open) | Single Acting Type (Normally Open) | Single Acting Type (Normally Open) | Single Acting Type (Normally Open) | Single Acting Type (Normally Open) | Single Acting Type (Normally Open) | Single Acting Type (Normally Open) | Single Acting Type (Normally Open) | Single Acting Type (Normally Open) | Single Acting Type (Normally Open) | Single Acting Type (Normally Open) | Single Acting Type (Normally Open) | Single Acting Type (Normally Open) | Single Acting Type (Normally Open) | Single Acting Type (Normally Open) | Single Acting Type (Normally Open) | Single Acting Type (Normally Open) | Single Acting Type (Normally Open) | Single Acting Type (Normally Open) | Single Acting Type (Normally Open) | Single Acting Type (Normally Open) | Single Acting Type (Normally Open) | Single Acting Type (Normally Open) | Single Acting Type (Normally Open) | Single Acting Type (Normally Open) | Single Acting Type (Normally Open) | Single Acting Type (Normally Open) | Single Acting Type (Normally Open) | Single Acting Type (Normally Open) | Single Acting Type (Normally Open) | Single Acting Type (Normally Open) | Single Acting Type (Normally Open) | Single Acting Type (Normally Open) | Single Acting Type (Normally Open) |
| Open Dimension L1(mm) | 5 ～ 60 | 9.4 ～ 41.3 | - | 17 ～ 41 | 15.2 ～ 33.3 | - | - | 4 ～ 6 | - | - | - | 14 | - | 12 | 12 ～ 33.3 | 4 ～ 6 | 8 ～ 19 | 15 ～ 30 | - | - | - | 12 ～ 33.3 | 6.8 ～ 12.8 | 8 ～ 12 | 4 | - | - | - | 5 ～ 44 | - | - | - | - | - | - | 9.5 ～ 27 | 42 ～ 68 | 20 | - | - | - | - | - | - | - |
| Closed Dimension L2(mm) | 1 ～ 30 | 1.4 ～ 19.3 | - | 15 ～ 35 | 11.2 ～ 19.3 | - | - | 0 | - | - | - | 10 | - | 8 | 8 ～ 19.3 | 0 | 6.8 ～ 12 | 9 ～ 15 | - | - | - | 8 ～ 19.3 | 6.8 ～ 12.8 | 8 ～ 12 | 0 | - | - | - | 2 ～ 25 | - | - | - | - | - | - | 7 ～ 19 | 18 ～ 28 | 0 | - | - | - | - | - | - | - |
| Type | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | - | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body |
| Gripping Force (when 0.5Mpa at closing)(N) | 1.9 ～ 217 | 7.1 ～ 50 | - | 9.6 ～ 144 | 6.5 ～ 47 | - | 2.4 | - | - | - | - | - | - | 1.9 | 1.9 ～ 45 | - | 2 ～ 42 | - | - | - | - | 1.9 ～ 45 | 3.2 ～ 9.5 | 5.7 | - | 0.08 ～ 0.2 | 0.08 ～ 0.2 | 0.08 ～ 0.2 | - | 0.08 ～ 0.2 | - | - | 0.08 ～ 0.2 | 0.2 | 0.08 ～ 0.2 | - | - | - | - | - | - | - | - | - | - |
| Gripping Force (when 0.5Mpa at opening)(N) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 2 ～ 42 | - | - | - | - | - | 3.2 ～ 9.5 | 5.7 | - | 0.08 ～ 0.2 | 0.08 ～ 0.2 | 0.08 ～ 0.2 | - | 0.08 ～ 0.2 | - | - | 0.08 ～ 0.2 | 0.2 | 0.08 ～ 0.2 | - | - | - | - | - | - | - | - | - | - |
| Maximum Gripping Force (Opening Side, Electric Type)(N) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Maximum Gripping Force (Closing Side, Electric Type)(N) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Environment, Applications | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | - | Standard | Standard | Standard | Standard / Dust Resistant / Drip Resistant | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | - | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard |
| Additional Functions | With Linear Guide / High Accuracy | With Linear Guide / High Accuracy | Bearing Support / High Accuracy | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | - | Bearing Support / High Accuracy | Bearing Support / High Accuracy | With Linear Guide / High Accuracy | With Linear Guide / High Accuracy | Not Provided | Not Provided | Bearing Support / High Accuracy | Not Provided | Not Provided | Bearing Support | With Linear Guide / High Accuracy | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | High Accuracy | Not Provided | Bearing Support / High Accuracy | Not Provided | Not Provided | Not Provided | Not Provided | High Accuracy | Not Provided | With Linear Guide / High Accuracy | Not Provided | Not Provided | Not Provided | Not Provided | With Linear Guide / High Accuracy | Not Provided | High Accuracy |
| Stroke Adjustment Mechanism | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | - | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided |
Loading...
Configure
Specification/Dimensions
-
Number of Fingers
- 2 pcs.
- 3 pcs.
- Others
-
Main Body Shape
-
Gripping Methods
-
Operation Method
- Double Acting Type
- Single Acting Type (Normally Open)
- Single Acting Type (Normally Closed)
-
Open Dimension L1(mm)
- 4
- 5
- 5.4
- 6
- 6.8
- 7
- 7.4
- 7.8
- 8
- 9.4
- 9.5
- 9.7
- 10
- 10.8
- 11
- 11.6
- 11.8
- 12
- 12.5
- 12.6
- 12.8
- 13
- 13.4
- 13.5
- 14
- 15
- 15.2
- 15.5
- 16
- 17
- 17.2
- 17.5
- 18
- 18.5
- 19
- 19.2
- 19.5
- 19.6
- 20
- 20.6
- 20.9
- 21.5
- 22
- 22.8
- 23.5
- 24
- 25
- 26
- 26.3
- 26.5
- 26.9
- 27
- 28
- 28.6
- 30
- 30.5
- 31
- 32
- 33
- 33.3
- 34
- 34.3
- 35
- 35.5
- 36
- 37
- 38
- 40
- 41
- 41.3
- 42
- 43
- 44
- 47.5
- 48
- 48.5
- 51
- 52
- 53.5
- 59
- 60
- 62
- 63.5
- 64
- 65
- 67
- 68
- 70
- 73
- 76
- 78
- 80
- 80.5
- 82
- 92
- 98
- 102
- 103
- 114
- 118
- 122
- 132
- 134
- 138
- 150
- 156
- 166
- 170
- 172
- 186
- 204
- 210
- 220
- 222
- 226
- 238
- 262
- 266
- 278
- 282
- 288
- 298
- 318
- 320
- 336
- 402
- 406
- 486
-
Closed Dimension L2(mm)
- 0
- 1
- 1.4
- 1.6
- 2
- 3
- 5
- 5.5
- 5.7
- 6.6
- 6.8
- 7
- 7.2
- 7.5
- 7.8
- 8
- 8.5
- 8.8
- 9
- 9.5
- 10
- 10.5
- 10.8
- 11
- 11.2
- 11.5
- 11.8
- 12
- 12.8
- 13
- 13.5
- 14
- 14.5
- 14.6
- 14.9
- 15
- 16
- 16.3
- 16.5
- 17.5
- 18
- 18.5
- 19
- 19.3
- 19.5
- 20
- 21
- 22
- 23
- 23.5
- 24
- 25
- 26
- 28
- 28.5
- 30
- 31
- 31.5
- 33
- 34
- 35
- 36
- 37
- 37.5
- 38
- 41
- 42
- 43
- 44
- 45
- 45.5
- 46
- 48
- 51
- 53.5
- 54
- 56
- 60.5
- 62
- 63
- 66
- 68
- 70
- 72
- 78
- 79
- 82
- 84
- 86
- 94
- 96
- 98
- 100
- 110
- 112
- 116
- 124
- 126
- 130
- 142
- 146
- 150
- 158
- 162
- 166
- 178
- 182
- 188
- 198
- 200
- 216
- 242
- 246
- 286
-
Type
- Main Body
- Related Components
- Main Body(Electric Type)
-
Gripping Force (when 0.5Mpa at closing)(N)
- 0.08
- 0.20
- 1,240
- 1,270
- 1.2
- 1.9
- 2
- 2.4
- 3,600
- 3.2
- 3.3
- 3.4
- 5.2
- 5.7
- 6,300
- 6.3
- 6.5
- 7
- 7.1
- 8
- 9
- 9.5
- 9.6
- 9.8
- 10
- 10,600
- 11
- 12
- 13
- 14
- 14.3
- 15
- 16
- 17
- 17.5
- 19
- 21
- 23
- 24
- 25
- 26
- 27
- 28
- 29.2
- 29.4
- 30
- 31
- 32
- 33
- 34
- 36
- 37
- 41
- 42
- 45
- 46
- 47
- 48
- 49
- 50
- 53
- 53.7
- 55
- 56
- 58
- 62
- 63
- 65
- 68
- 69
- 74
- 75
- 79
- 80
- 88
- 90
- 94.9
- 97
- 111
- 118
- 130
- 131
- 140
- 141
- 144
- 153.1
- 155
- 158
- 177
- 187
- 217
- 228
- 251
- 254
- 280
- 335
- 396
- 400
- 500
- 502
- 750
-
Gripping Force (when 0.5Mpa at opening)(N)
- 0.08
- 0.20
- 1,320
- 2
- 3.2
- 3.7
- 5.2
- 5.7
- 6.1
- 6.5
- 7.8
- 9.5
- 11
- 12
- 12.3
- 13
- 14
- 15
- 16
- 17
- 18
- 19
- 21
- 21.2
- 22
- 23
- 25
- 26
- 28
- 30
- 31
- 32
- 33
- 34
- 35
- 36
- 36.5
- 38
- 40
- 42
- 44
- 45
- 46
- 47
- 48
- 49
- 53
- 56
- 57
- 59
- 61
- 63
- 66
- 68
- 71
- 73
- 74
- 77
- 82
- 83
- 85
- 86
- 90
- 97
- 100
- 104
- 108
- 118
- 123
- 127
- 130
- 131
- 139
- 141
- 153
- 161
- 169
- 187
- 193
- 195
- 204
- 227
- 228
- 247
- 267
- 268
- 279
- 306
- 318
- 329
- 359
- 396
- 490
- 525
- 537
- 780
-
Maximum Gripping Force (Opening Side, Electric Type)(N)
-
Maximum Gripping Force (Closing Side, Electric Type)(N)
-
Environment, Applications
-
Additional Functions
-
Stroke Adjustment Mechanism
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
Related Categories to Hands, Grippers
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy