(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Hands, Grippers（Type：Main Body Page2）
| Days to Ship |
|
|---|
-
MEG
[Features]
・ Only 10-mm thickness, and weight of 20 g
・ "Ultra-compact" 2-jaw parallel opening/closing chuck that is as small as a little finger
・ Delicate like tweezers
・ Strong against speeding up and easy to handle
・ Minimal and flat. The manufacturer has achieved to make it extremely small- CAD ：
- 2D
Standard Price: MYR 1,119.68 Days to Ship: 4 Day(s) or more -
Gripper, Closed Chuck Shank Type
PISCO
[Features]
· Stainless steel air chuck with light weight and super small.
· Stable chucking with work stopper.
· Floating type can use the work stopper more effectively and prevents damages with thrust.
· Claw shape: The K type has crude claw blanks.
· No need to worry about misalignment with R alignment- CAD ：
- 2D
Standard Price: MYR 426.37- Days to Ship: 4 Day(s) or more -
PISCO
[Features]
· Stainless steel air chuck with light weight and super small.
· Stable chucking with work stopper.
· Floating type can use the work stopper more effectively and prevents damages with thrust.
· Claw shape: The K type has crude claw blanks.
· No need to worry about misalignment with R alignment- CAD ：
- 2D
Standard Price: MYR 446.94- Days to Ship: 9 Day(s) or more -
Closed Chuck, Floating Attachment Panel Mount Type, Chuck Direction Perpendicular
PISCO
[Features]
· Stainless steel air chuck with light weight and super small.
· Stable chucking with work stopper.
· Floating type can use the work stopper more effectively and prevents damages with thrust.
· Claw shape: The K type has crude claw blanks.
· No need to worry about misalignment with R alignment- CAD ：
- 2D
Standard Price: MYR 580.97- Days to Ship: 10 Day(s) or more -
Open Chuck, Floating Attachment Panel Mount Type, Chuck Direction Perpendicular
PISCO
[Features]·A lightweight, ultra-compact stainless steel air chuck. ·Normally closed lever chuck.
- CAD ：
- 2D
Standard Price: MYR 557.29- Days to Ship: 10 Day(s) or more -
Opening Chuck Block Type with Floating Chuck Direction Perpendicular
PISCO
[Features]
· Stainless steel air chuck with light weight and super small.
· Simple form doesn't need dedicated nails and can hold work directly.
· Stable chucking with the work stopper.
· The type with floating can use the work stopper more effectively and prevents the damages caused by thrusting- CAD ：
- 2D
Standard Price: MYR 655.74- Days to Ship: 10 Day(s) or more -
Three-Way Jaw Thin Chuck CKA Series
CKD
Supports handling with a large selection including thin, light weight, wide stroke, high precision types, etc. Note: CAD data of this series is being revised. Please wait till the corrections are done.
Days to Ship: 27 Day(s) or more -
Gripper, Closed Chuck Shank Type (2-Screw Mounting Method)
PISCO
[Features]
· Stainless steel air chuck with light weight and super small.
· Stable chucking with work stopper.
· Floating type can use the work stopper more effectively and prevents damages with thrust.
· Claw shape: The K type has crude claw blanks.
· No need to worry about misalignment with R alignment- CAD ：
- 2D
Standard Price: MYR 426.37- Days to Ship: 10 Day(s) or more -
Standard Price: MYR 3,002.22- Days to Ship: 27 Day(s) or more -
Gripper, Thin Chuck CKS/CKSF Series
KONDO
Pursues its thinness. Effective for the limited space of equipment.
[Features]
· Change the cylinder inside to transverse configuration from traditional vertical configuration and decrease the thickness after stretching the stroke.
· Can fit easily in the space limited in the equipment.
· Minimizes complications by changing the traditional bulk type to a linear motion type as well as minimizes malfunction caused by grease shortages.
· New product of hollow and large type.
· Pusher mounted the thickness without change.
· Stable work supply by pushing 3 points.
· Increases the effect of dust proofing by narrowing the gap between the child claws and the bodyStandard Price: MYR 2,040.86- Days to Ship: 27 Day(s) or more -
KONDO
Hollow type and multi-function embedded. In addition, light weight and compact design.
Standard Price: MYR 2,776.01- Days to Ship: 27 Day(s) or more -
Hand rubber cover thin model parallel hand (cross-roller type) HLBG series
KONDO
Thin parallel hand with rubber cover.
[Features]
· Cross roller type.
· Bearing guide with cross roller type and achieves smooth and high precision operation.
· Compact and long stroke.
· Compact design with low height.
· Stroke is long and support combination of large and small works.
· Improves resistant environment with rubber cover.
· Prevents mist and dust invasion by installing the rubber cover with the slide part and increases the resistance to environmentStandard Price: MYR 2,090.00- Days to Ship: 22 Day(s) or more -
Hand great retention 180° wide angle hand HJD series
KONDO
Thin hand with wide angle of 180 degrees opening/closing.
[Features]
· Large holding force hand with wide angle of 180° opening/closing.
· Small and strong holding force with toggle structure: Simple operation with wide angle of 180° opening/closing.
· Piston guide adoption: Increase repeat accuracy by preventing drift of piston operation.
· Increase durability without loading the piston directly.
· Increase rigidity for guide to receive external stress of master jaw.Standard Price: MYR 2,146.55- Days to Ship: 27 Day(s) or more -
Hand Large Gripping Force Parallel Hand HH Series
KONDO
Parallel hand with light weight and high holding force.
[Features]
· Parallel hand with light weight and high holding force.
· Saving space: No need of space when mounting hand with low overall height.
· Light weight and large holding force: Can choose a robot one rank lower compared to the traditional product.
· High rigidity and high resistance: Impact resistance T type slide guide.Standard Price: MYR 12,939.81- Days to Ship: 27 Day(s) or more -
Rotary Actuated Air Gripper, 2-Finger Type, MHR2/MDHR2 Series
SMC
[Features]
· High repeatability: ±0.01 mm.
& nbspUtilizes a parallel opening and closing mechanism with cross roller guide for a smooth action free from play, ensuring high precision and a long service life.
· Smaller profile.
& nbspUse of rotary actuators for part of the actuator makes it possible to have a more compact design.
· High degree of mounting flexibility.
· The D-M9 solid state auto switch with indicator light can be mounted for easy positioning and detecting.
· High rigidity type.
· Connection ports on 2 sides.
· Supports both internal and external gripping.Standard Price: MYR 1,588.76- Days to Ship: 3 Day(s) or more -
180° Angular Air Gripper, Rack And Pinion Type, MHW2 Series
SMC
[Features]
· The unique seal construction allows for a shorter overall length and a constant grip strength when opening/closing.
· Can be equipped with auto switches in 4 locations.
· The key connection offers excellent impact-resistance.
· 2 types of finger option.
· Dustproof structure.
· Bearings equipped as standard.Standard Price: MYR 1,688.98- Days to Ship: 3 Day(s) or more -
SMC
[Rechargeable battery compatible series]
Copper (Cu) and zinc (Zn) materials are not used to reduce product defects in the rechargeable battery manufacturing process.
Some aluminum alloys and die-cast aluminum materials contain small amounts of copper (Cu) and zinc (Zn) as additive elements.
Electrolytic nickel plating and zinc plating with copper base are not used. (Electrolytic nickel plating is used. )
This product uses low dew point compatible grease, can be used at -70°C, improved performance in low dew point environment.Standard Price: MYR 1,046.94- Days to Ship: 27 Day(s) or more -
Gripper, Rotary Drive Type Air Chuck 3-Jaw Type Clean, Low Dust Generation 11-/22-MHR3 Series
SMC
[11-Series Clean Series]
・ This product can be used in a clean environment
・ Prevents dust generation in the cleanroom
[22-Series, Copper-Free / Fluorine-Free / Silicone-Free + Low Dust Generation]
・ This product can be used in environments with restrictions on copper-based, fluorine-based, and silicone-based materials
・ The structure is the same as the Clean Series (Grease and packaging are different from the Clean Series)Days to Ship: 27 Day(s) or more -
SMC
[11-Series Clean Series]
・ This product can be used in a clean environment
・ Prevents dust generation in the cleanroom
[20-series Copper-Free/Fluorine-Free Specifications]
・ It can be used in environments where copper and fluorine materials should be avoided
・ External dimensions are the same as standard products
[22-Series, Copper-Free / Fluorine-Free / Silicone-Free + Low Dust Generation]
・ This product can be used in environments with restrictions on copper-based, fluorine-based, and silicone-based materials
・ The structure is the same as the Clean Series (Grease and packaging are different from the Clean Series)Days to Ship: 3 Day(s) or more -
SMC
[11-Series Clean Series]
・ This product can be used in a clean environment
・ Prevents dust generation in the cleanroom
[22-Series, Copper-Free / Fluorine-Free / Silicone-Free + Low Dust Generation]
・ This product can be used in environments with restrictions on copper-based, fluorine-based, and silicone-based materials
・ The structure is the same as the Clean Series (Grease and packaging are different from the Clean Series)Days to Ship: 3 Day(s) or more -
Low Profile Air Gripper HFD Series
AIRTAC
[Features]
・ Due to the double guide design, it is possible to improve the allowable load and suppress the moment (Mr).
・ The double piston structure makes it possible to double the thrust and holding force.
・ The fixing pin structure on the bottom makes it possible to improve the mounting accuracy.
・ Stainless steel is used for the grippers and guide rail material, improving high stiffness and corrosion resistance.
・ It can be installed on 4 sides.
・ Compared to other products based on the same standard, the height is reduced by approx. 50%, which makes it possible to save space and suppress low amplitude moments.Standard Price: MYR 918.77 Days to Ship: 21 Day(s) or more -
Closed Chuck Panel Mount Type with Floating Chuck Direction Parallel
PISCO
Stainless steel air chuck with light weight and super small.
[Features]
· Stainless steel air chuck with light weight and super small.
· Stable chucking with work stopper.
· Floating type can use the work stopper more effectively and prevents damages with thrust.
· Claw shape: The K type has crude claw blanks so you don't need to worry about misalignment with R alignment- CAD ：
- 2D
Standard Price: MYR 580.97- Days to Ship: 10 Day(s) or more -
Closing Chuck Block Type With Floating Chuck Direction Parallel
PISCO
[Features]
· Stainless steel air chuck with light weight and super small.
· Stable chucking with work stopper.
· The type with floating can use the work stopper more effectively and prevents the damages caused by thrusting.
· Claw shape: The K type has crude claw blanks.
· No need to worry about misalignment with R alignment- CAD ：
- 2D
Standard Price: MYR 760.84 Days to Ship: 9 Day(s) or more -
Closed Chuck, Floating Attachment Block Type, Chuck Direction Perpendicular
PISCO
Stainless steel air chuck with light weight and super small.
- CAD ：
- 2D
Standard Price: MYR 668.60- Days to Ship: 10 Day(s) or more -
Opening Chuck Panel Mount Type
PISCO
Stainless steel air chuck with light weight and super small.
- CAD ：
- 2D
Standard Price: MYR 396.98- Days to Ship: 10 Day(s) or more -
Open Chuck, Floating Attachment Panel Mount Type, Chuck Direction Parallel
PISCO
Stainless steel air chuck with light weight and super small.
- CAD ：
- 2D
Standard Price: MYR 557.29- Days to Ship: 10 Day(s) or more -
Open Chuck, Floating Attachment Block Type, Chuck Direction Parallel
PISCO
Stainless steel air chuck with light weight and super small.
- CAD ：
- 2D
Standard Price: MYR 655.74- Days to Ship: 10 Day(s) or more -
CKD
[Features]
· Supports handling with wide range of products including thin, light weight, wide stroke and high precision type, etc.
· This series is under revision of the CAD data.
· Please wait until revision is completed.- CAD ：
- 2D
Days to Ship: 21 Day(s) or more -
CKD
Supports handling with a large selection including thin, light weight, wide stroke, high precision types, etc. Note: CAD data of this series is being revised. Please wait till the corrections are done.
- CAD ：
- 2D
Days to Ship: 23 Day(s) or more -
Crossed Roller Parallel Hand HKP Series
CKD
Supports handling with a large selection including thin, light weight, wide stroke, high precision types, etc. Note: CAD data of this series is being revised. Please wait till the corrections are done.
- CAD ：
- 2D
Days to Ship: 27 Day(s) or more -
Parallel Hand, Linear Guide Hand, LHA Series
CKD
Supports handling with a large selection including thin, light weight, wide stroke, high precision types, etc. Note: CAD data of this series is being revised. Please wait till the corrections are done.
- CAD ：
- 2D
Days to Ship: 17 Day(s) or more -
Thin Parallel Hand, HLA/HLB Series
CKD
Supports handling with a large selection including thin, light weight, wide stroke, high precision types, etc. Note: CAD data of this series is being revised. Please wait till the corrections are done.
Standard Price: MYR 1,091.03 Days to Ship: 9 Day(s) or more -
Wide-angle Hand Fulcrum Hand HBL Series
CKD
Supports handling with a large selection including thin, light weight, wide stroke, high precision types, etc. Note: CAD data of this series is being revised. Please wait till the corrections are done.
Days to Ship: 24 Day(s) or more -
CKL/BHA-FC Series, Clean/Special Mechanical Hand and Mechanical Chuck
KONDO
[Features]
· Suitable to the hand for rotary table and shuttle mover can't use air piping.
· Holds outer diameter with spring and suitable with heat resistant hand with packing not used.
· Drives by external force of the opening side and supports high speed tact.Standard Price: MYR 1,758.12- Days to Ship: 27 Day(s) or more -
Chuck 4 Nail 2 Drive Chuck CKE Series
KONDO
Supports deformed object and chuck compatible for handling.
Standard Price: MYR 5,694.51- Days to Ship: 27 Day(s) or more -
Gripper, Thin Chuck CKA/CKB/CKD Series
KONDO
Body is light weight and compact to deal with. And powerful handling design. Select from 3 types of nails depending on its usage.
[Features]
· Long running stroke of nail and no need to adjust it.
· Has 3 way claws, CKA type, 2 way claws, CKB type, and 4 way claws, CKD type.
· Body has light weight and compact design to deal with and has strong holding forceStandard Price: MYR 1,588.47- Days to Ship: 27 Day(s) or more -
Hand, Crab Type Parallel Hand, HF Series
KONDO
Strong compact tool not needing combination adjustment.
Standard Price: MYR 3,334.10- Days to Ship: 27 Day(s) or more -
HLAG Series Bushing Type Rubber-coated Slim Parallel Hand
KONDO
Thin and compact parallel hand.
[Features]
· Thin and compact parallel hand.
· High impact resistant bush guide is used.
· Compact design with low height.
· Long running stroke with nail and no need for combination adjustment.
· Prevents mist and dust invasion by installing the rubber cover with the slide part and increases the resistance to environmentStandard Price: MYR 1,185.20- Days to Ship: 22 Day(s) or more -
Standard Price: MYR 1,637.60- Days to Ship: 27 Day(s) or more -
KONDO
High holding force with compact body.
[Features]
· High holding force with compact body.
· Small and large holding force with the toggle mechanism.
· Can mount sensor confirming open/close.
· Improves repeat precision, resistance and rigidity by piston guideStandard Price: MYR 2,146.55- Days to Ship: 27 Day(s) or more -
Hand mini parallel hand HMA series
KONDO
Compact size with light weight and small.
[Features]
· Compact size with light weight and small.
· Compact body with integration.
· Simplified with cylinder integrated structure.
· Lower price.
· Wide variety.
· HMA5 models (ø10, ø12, ø16, ø20, ø25) have been added, along with other series, for a total of 24 models ranging in cylinder diameters of between ø10 and ø100.
· Supports any works.
· Wide range of options.
· Can mount switch confirming open/closeStandard Price: MYR 1,015.56- Days to Ship: 22 Day(s) or more -
Hand mini one fulcrum hand HMB series
KONDO
Low cost, small, light weight and compact.
[Features]
· Low cost, small, light weight and compact.
· Compact body with integration.
· Simplified with cylinder integrated structure.
· Lower price.
· Wide variety.
· HMB4 models have been added, making a total of 10 available models ranging in cylinder diameters of between ø10 and ø40.
· Wide range of options.
· You can choose the body color based on the machine body (standard is calm dark brown) and you can mount a switch confirming open/close.
· Sensor confirming open/close.
· Mounting switch in 2 locations with all models of the series.Standard Price: MYR 631.02- Days to Ship: 27 Day(s) or more -
KONDO
Hand pursued by high resistance associated with speeding up the equipment.
[Features]
· Hand pursued by high resistance associated with speeding up the equipment.
· High rigidity, high precision, and long life by adopting an unity form of linear guide.
· Supports long nails.
· Supports low sliding (option).
· Centering precision ±0.05 mm (option).
· Supports rubber cover (option).
· New L1 series with running stroke doubledStandard Price: MYR 1,224.79- Days to Ship: 9 Day(s) or more -
Hand long stroke parallel hand HG series
KONDO
Stroke focused and full force with light weight and compact.
[Features]
· Stroke focused and full force with light weight and compact.
· Super long stroke hand.
· Super long stroke by increasing cam ratio.
· Light weight and compact.
· Light weight and compact body.
· Thin for easy handling.
· Easy mounting.
· Mounting from any direction with 3 directions of mounting surface.
· Sensor confirming open/close.
· Mounting switch in 2 locations with all models of the seriesStandard Price: MYR 3,390.65- Days to Ship: 27 Day(s) or more -
Hand thin-type long stroke hand HLF series
KONDO
Thin, light weight and low price. 25% of height and 30% of weight DOWN compared to the traditional products.
[Features]
· Thin and light weight.
· 25% of height DOWN and 30% of weight DOWN.
· High holding force.
· Large holding force with the double piston system.
· Mounting from 4 directions.
· Body is mounted by the body mounting tap in 4 directions and through hole in 1 direction.
· Long stroke.
· Supports even with many kinds of works.
· Supports sensors confirming various open/close.
· Supports contact-less sensor, contact sensor and cutting oil supporting sensorStandard Price: MYR 1,750.71- Days to Ship: 22 Day(s) or more
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Number of Fingers |
| Main Body Shape |
| Gripping Methods |
| Operation Method |
| Open Dimension L1(mm) |
| Closed Dimension L2(mm) |
| Type |
| Gripping Force (when 0.5Mpa at closing)(N) |
| Gripping Force (when 0.5Mpa at opening)(N) |
| Maximum Gripping Force (Opening Side, Electric Type)(N) |
| Maximum Gripping Force (Closing Side, Electric Type)(N) |
| Environment, Applications |
| Additional Functions |
| Stroke Adjustment Mechanism |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MEG | PISCO | PISCO | PISCO | PISCO | PISCO | CKD | PISCO | KONDO | KONDO | KONDO | KONDO | KONDO | KONDO | SMC | SMC | SMC | SMC | SMC | SMC | AIRTAC | PISCO | PISCO | PISCO | PISCO | PISCO | PISCO | CKD | CKD | CKD | CKD | CKD | CKD | KONDO | KONDO | KONDO | KONDO | KONDO | KONDO | KONDO | KONDO | KONDO | KONDO | KONDO | KONDO |
| Product Series | Closed Chuck, Floating Attachment Panel Mount Type, Chuck Direction Perpendicular | Open Chuck, Floating Attachment Panel Mount Type, Chuck Direction Perpendicular | Opening Chuck Block Type with Floating Chuck Direction Perpendicular | Hand rubber cover thin model parallel hand (cross-roller type) HLBG series | Rotary Actuated Air Gripper, 2-Finger Type, MHR2/MDHR2 Series | Gripper, Rotary Drive Type Air Chuck 3-Jaw Type Clean, Low Dust Generation 11-/22-MHR3 Series | Closed Chuck Panel Mount Type with Floating Chuck Direction Parallel | Closing Chuck Block Type With Floating Chuck Direction Parallel | Closed Chuck, Floating Attachment Block Type, Chuck Direction Perpendicular | Open Chuck, Floating Attachment Panel Mount Type, Chuck Direction Parallel | Open Chuck, Floating Attachment Block Type, Chuck Direction Parallel | CKL/BHA-FC Series, Clean/Special Mechanical Hand and Mechanical Chuck | |||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
| Days to Ship | 4 Day(s) or more | 4 Day(s) or more | 9 Day(s) or more | 10 Day(s) or more | 10 Day(s) or more | 10 Day(s) or more | 27 Day(s) or more | 10 Day(s) or more | 27 Day(s) or more | 27 Day(s) or more | 27 Day(s) or more | 22 Day(s) or more | 27 Day(s) or more | 27 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more | 27 Day(s) or more | 27 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more | 21 Day(s) or more | 10 Day(s) or more | 9 Day(s) or more | 10 Day(s) or more | 10 Day(s) or more | 10 Day(s) or more | 10 Day(s) or more | 21 Day(s) or more | 23 Day(s) or more | 27 Day(s) or more | 17 Day(s) or more | 9 Day(s) or more | 24 Day(s) or more | 27 Day(s) or more | 27 Day(s) or more | 27 Day(s) or more | 27 Day(s) or more | 22 Day(s) or more | 27 Day(s) or more | 27 Day(s) or more | 22 Day(s) or more | 27 Day(s) or more | 9 Day(s) or more | 27 Day(s) or more | 22 Day(s) or more |
| Number of Fingers | 2 pcs. | 2 pcs. | 2 pcs. | 2 pcs. | 2 pcs. | 2 pcs. | 3 pcs. | 2 pcs. | 3 pcs. | 3 pcs. | 3 pcs. | 2 pcs. | 2 pcs. | 2 pcs. | 2 pcs. | 2 pcs. | 2 pcs. | 3 pcs. | 2 pcs. | 2 pcs. | 2 pcs. | 2 pcs. | 2 pcs. | 2 pcs. | 2 pcs. | 2 pcs. | 2 pcs. | 2 pcs. | 3 pcs. | 2 pcs. | 2 pcs. | 2 pcs. | 2 pcs. | 2 pcs. | Others | 3 pcs. | 2 pcs. | 2 pcs. | 2 pcs. | 2 pcs. | 2 pcs. | 2 pcs. | 2 pcs. | 2 pcs. | 2 pcs. |
| Main Body Shape | Cylindrical Shape | Cylindrical Shape | Cylindrical Shape | Cylindrical Shape | Cylindrical Shape | Cylindrical Shape | Cylindrical Shape | Cylindrical Shape | Special Shape | Special Shape | Hollow Shape | Square Shape | Square Shape | Square Shape | Cylindrical Shape | Square Shape | Square Shape | Cylindrical Shape | Square Shape (Wide) | Square Shape | Square Shape (Flat Shape) | Cylindrical Shape | Cylindrical Shape | Cylindrical Shape | Cylindrical Shape | Cylindrical Shape | Cylindrical Shape | Square Shape | Hollow Shape | Square Shape | Square Shape | - | Square Shape | Square Shape | Special Shape | Special Shape | Square Shape (Wide) | Square Shape | Square Shape | Square Shape | Square Shape | Square Shape | Square Shape | Square Shape | Square Shape (Flat Shape) |
| Gripping Methods | Pinch, Parallel Type | Pinch, Swing Type | Pinch, Swing Type | Pinch, Swing Type | Open, Swing Type | Open, Swing Type | Pinch, Chuck Type / Open, Chuck Type | Pinch, Swing Type | Pinch, Chuck Type / Open, Chuck Type | Pinch, Chuck Type / Open, Chuck Type | Pinch, Chuck Type / Open, Chuck Type | Pinch, Parallel Type / Open, Parallel Type | Pinch, Swing Type | Pinch, Parallel Type / Open, Parallel Type | Pinch, Chuck Type / Open, Chuck Type | Pinch, Swing Type | Pinch, Parallel Type / Pinch, Chuck Type / Open, Parallel Type / Open, Chuck Type | Pinch, Chuck Type / Open, Chuck Type | Pinch, Parallel Type / Open, Parallel Type | Pinch, Parallel Type / Pinch, Chuck Type / Open, Parallel Type / Open, Chuck Type | Pinch, Chuck Type / Open, Chuck Type | Pinch, Swing Type | Pinch, Swing Type | Pinch, Swing Type | Open, Swing Type | Open, Swing Type | Open, Swing Type | Pinch, Parallel Type / Open, Parallel Type | Pinch, Chuck Type / Open, Chuck Type | Pinch, Parallel Type / Open, Parallel Type | Pinch, Parallel Type / Open, Parallel Type | Pinch, Parallel Type / Open, Parallel Type | Pinch, Swing Type / Open, Swing Type | Pinch, Parallel Type | Pinch, Chuck Type / Open, Chuck Type | Pinch, Chuck Type / Open, Chuck Type | Pinch, Parallel Type / Open, Parallel Type | Pinch, Parallel Type / Open, Parallel Type | Pinch, Parallel Type / Open, Parallel Type | Pinch, Swing Type | Pinch, Parallel Type / Open, Parallel Type | Pinch, Swing Type / Open, Swing Type | Pinch, Parallel Type / Open, Parallel Type | Pinch, Parallel Type / Open, Parallel Type | Pinch, Parallel Type / Open, Parallel Type |
| Operation Method | Single Acting Type (Normally Open) | Single Acting Type (Normally Open) | Single Acting Type (Normally Open) | Single Acting Type (Normally Open) | Single Acting Type (Normally Closed) | Single Acting Type (Normally Closed) | Double Acting Type / Single Acting Type (Normally Open) / Single Acting Type (Normally Closed) | Single Acting Type (Normally Open) | Double Acting Type / Single Acting Type (Normally Open) / Single Acting Type (Normally Closed) | - | Double Acting Type / Single Acting Type (Normally Open) / Single Acting Type (Normally Closed) | - | - | - | Double Acting Type | Double Acting Type | Double Acting Type | Double Acting Type | Double Acting Type | Double Acting Type | Double Acting Type | Single Acting Type (Normally Open) | Single Acting Type (Normally Open) | Single Acting Type (Normally Open) | Single Acting Type (Normally Closed) | Single Acting Type (Normally Closed) | Single Acting Type (Normally Closed) | - | Double Acting Type / Single Acting Type (Normally Open) / Single Acting Type (Normally Closed) | Double Acting Type / Single Acting Type (Normally Open) / Single Acting Type (Normally Closed) | Double Acting Type / Single Acting Type (Normally Open) / Single Acting Type (Normally Closed) | Double Acting Type | Double Acting Type / Single Acting Type (Normally Open) / Single Acting Type (Normally Closed) | - | - | Double Acting Type / Single Acting Type (Normally Open) / Single Acting Type (Normally Closed) | - | - | - | - | Double Acting Type / Single Acting Type (Normally Open) / Single Acting Type (Normally Closed) | Double Acting Type / Single Acting Type (Normally Open) / Single Acting Type (Normally Closed) | Double Acting Type / Single Acting Type (Normally Open) / Single Acting Type (Normally Closed) | Double Acting Type / Single Acting Type (Normally Open) / Single Acting Type (Normally Closed) | - |
| Open Dimension L1(mm) | 4 | - | - | - | - | - | 5 ～ 44 | - | - | - | - | - | - | - | 8 ～ 37 | - | 15.2 ～ 60 | 11 ～ 13.5 | 76 ～ 486 | 9.7 ～ 33.3 | 68 | - | - | - | - | - | - | 7 ～ 22 | 9.5 ～ 27 | 42 ～ 70 | 20 | 30 | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Closed Dimension L2(mm) | 0 | - | - | - | - | - | 2 ～ 25 | - | - | - | - | - | - | - | 5 ～ 19 | - | 11.2 ～ 30 | 8 ～ 9.5 | 56 ～ 286 | 5.7 ～ 19.3 | 38 | - | - | - | - | - | - | 0 | 7 ～ 19 | 10 ～ 28 | 0 | 15 | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Type | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body |
| Gripping Force (when 0.5Mpa at closing)(N) | - | 0.08 ～ 0.2 | 0.08 ～ 0.2 | 0.08 ～ 0.2 | 0.08 ～ 0.2 | 0.08 ～ 0.2 | - | 0.08 ～ 0.2 | - | - | - | - | - | - | 12 ～ 58 | 14.3 ～ 153.1 | 11 ～ 254 | 7 ～ 13 | 14 ～ 396 | 9.8 ～ 65 | 90 | 0.08 ～ 0.2 | 0.2 | 0.08 ～ 0.2 | 0.08 ～ 0.2 | 0.08 ～ 0.2 | 0.08 ～ 0.2 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Gripping Force (when 0.5Mpa at opening)(N) | - | 0.08 ～ 0.2 | 0.08 ～ 0.2 | 0.08 ～ 0.2 | 0.08 ～ 0.2 | 0.08 ～ 0.2 | - | 0.08 ～ 0.2 | - | - | - | - | - | - | 12 ～ 59 | - | 17 ～ 318 | 6.5 ～ 12 | 14 ～ 396 | 17 ～ 104 | 90 | 0.08 ～ 0.2 | 0.2 | 0.08 ～ 0.2 | 0.08 ～ 0.2 | 0.08 ～ 0.2 | 0.08 ～ 0.2 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Maximum Gripping Force (Opening Side, Electric Type)(N) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Maximum Gripping Force (Closing Side, Electric Type)(N) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Environment, Applications | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard / Dust Resistant / Drip Resistant | Standard | Standard | Standard / Available in Cleanroom Environment | Standard / Dust Resistant | Standard | Available in Cleanroom Environment / Copper-free/Fluorine-free Specification | Available in Cleanroom Environment / Copper-free/Fluorine-free Specification | Available in Cleanroom Environment / Copper-free/Fluorine-free Specification | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | - | Standard | Standard | Standard | Standard / Available in Cleanroom Environment | Standard | Standard | Standard | Standard / Dust Resistant / Drip Resistant | Standard | Standard | Standard | Standard | Standard | Standard | Standard |
| Additional Functions | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | High Accuracy | Not Provided | Bearing Support / High Accuracy | Not Provided | Not Provided | High Accuracy | Not Provided | Not Provided | With Linear Guide / Bearing Support / High Accuracy | Speed control | With Linear Guide | High Accuracy | Not Provided | With Linear Guide | With Linear Guide | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Bearing Support / High Accuracy | High Accuracy | Not Provided | With Linear Guide / High Accuracy | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | High Accuracy | Not Provided | Not Provided | Not Provided | With Linear Guide / High Accuracy | Not Provided | Not Provided |
| Stroke Adjustment Mechanism | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided / Open Direction Adjustment / Close Direction Adjustment / Open/Close Dual Adjustment | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided / Open Direction Adjustment / Close Direction Adjustment / Open/Close Dual Adjustment | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided |
Loading...
Configure
Specification/Dimensions
-
Number of Fingers
- 2 pcs.
- 3 pcs.
- Others
-
Main Body Shape
-
Gripping Methods
-
Operation Method
- Double Acting Type
- Single Acting Type (Normally Open)
- Single Acting Type (Normally Closed)
-
Open Dimension L1(mm)
- 4
- 5
- 5.4
- 6
- 6.8
- 7
- 7.4
- 7.8
- 8
- 9.4
- 9.5
- 9.7
- 10
- 10.8
- 11
- 11.6
- 11.8
- 12
- 12.5
- 12.6
- 12.8
- 13
- 13.4
- 13.5
- 14
- 15
- 15.2
- 15.5
- 16
- 17
- 17.2
- 17.5
- 18
- 18.5
- 19
- 19.2
- 19.5
- 19.6
- 20
- 20.6
- 20.9
- 21.5
- 22
- 22.8
- 23.5
- 24
- 25
- 26
- 26.3
- 26.5
- 26.9
- 27
- 28
- 28.6
- 30
- 30.5
- 31
- 32
- 33
- 33.3
- 34
- 34.3
- 35
- 35.5
- 36
- 37
- 38
- 40
- 41
- 41.3
- 42
- 43
- 44
- 47.5
- 48
- 48.5
- 51
- 52
- 53.5
- 59
- 60
- 62
- 63.5
- 64
- 65
- 67
- 68
- 70
- 73
- 76
- 78
- 80
- 80.5
- 82
- 92
- 98
- 102
- 103
- 114
- 118
- 122
- 132
- 134
- 138
- 150
- 156
- 166
- 170
- 172
- 186
- 204
- 210
- 220
- 222
- 226
- 238
- 262
- 266
- 278
- 282
- 288
- 298
- 318
- 320
- 336
- 402
- 406
- 486
-
Closed Dimension L2(mm)
- 0
- 1
- 1.4
- 1.6
- 2
- 3
- 5
- 5.5
- 5.7
- 6.6
- 6.8
- 7
- 7.2
- 7.5
- 7.8
- 8
- 8.5
- 8.8
- 9
- 9.5
- 10
- 10.5
- 10.8
- 11
- 11.2
- 11.5
- 11.8
- 12
- 12.8
- 13
- 13.5
- 14
- 14.5
- 14.6
- 14.9
- 15
- 16
- 16.3
- 16.5
- 17.5
- 18
- 18.5
- 19
- 19.3
- 19.5
- 20
- 21
- 22
- 23
- 23.5
- 24
- 25
- 26
- 28
- 28.5
- 30
- 31
- 31.5
- 33
- 34
- 35
- 36
- 37
- 37.5
- 38
- 41
- 42
- 43
- 44
- 45
- 45.5
- 46
- 48
- 51
- 53.5
- 54
- 56
- 60.5
- 62
- 63
- 66
- 68
- 70
- 72
- 78
- 79
- 82
- 84
- 86
- 94
- 96
- 98
- 100
- 110
- 112
- 116
- 124
- 126
- 130
- 142
- 146
- 150
- 158
- 162
- 166
- 178
- 182
- 188
- 198
- 200
- 216
- 242
- 246
- 286
-
Type
- Main Body
- Related Components
- Main Body(Electric Type)
-
Gripping Force (when 0.5Mpa at closing)(N)
- 0.08
- 0.20
- 1,240
- 1,270
- 1.2
- 1.9
- 2
- 2.4
- 3,600
- 3.2
- 3.3
- 3.4
- 5.2
- 5.7
- 6,300
- 6.3
- 6.5
- 7
- 7.1
- 8
- 9
- 9.5
- 9.6
- 9.8
- 10
- 10,600
- 11
- 12
- 13
- 14
- 14.3
- 15
- 16
- 17
- 17.5
- 19
- 21
- 23
- 24
- 25
- 26
- 27
- 28
- 29.2
- 29.4
- 30
- 31
- 32
- 33
- 34
- 36
- 37
- 41
- 42
- 45
- 46
- 47
- 48
- 49
- 50
- 53
- 53.7
- 55
- 56
- 58
- 62
- 63
- 65
- 68
- 69
- 74
- 75
- 79
- 80
- 88
- 90
- 94.9
- 97
- 111
- 118
- 130
- 131
- 140
- 141
- 144
- 153.1
- 155
- 158
- 177
- 187
- 217
- 228
- 251
- 254
- 280
- 335
- 396
- 400
- 500
- 502
- 750
-
Gripping Force (when 0.5Mpa at opening)(N)
- 0.08
- 0.20
- 1,320
- 2
- 3.2
- 3.7
- 5.2
- 5.7
- 6.1
- 6.5
- 7.8
- 9.5
- 11
- 12
- 12.3
- 13
- 14
- 15
- 16
- 17
- 18
- 19
- 21
- 21.2
- 22
- 23
- 25
- 26
- 28
- 30
- 31
- 32
- 33
- 34
- 35
- 36
- 36.5
- 38
- 40
- 42
- 44
- 45
- 46
- 47
- 48
- 49
- 53
- 56
- 57
- 59
- 61
- 63
- 66
- 68
- 71
- 73
- 74
- 77
- 82
- 83
- 85
- 86
- 90
- 97
- 100
- 104
- 108
- 118
- 123
- 127
- 130
- 131
- 139
- 141
- 153
- 161
- 169
- 187
- 193
- 195
- 204
- 227
- 228
- 247
- 267
- 268
- 279
- 306
- 318
- 329
- 359
- 396
- 490
- 525
- 537
- 780
-
Maximum Gripping Force (Opening Side, Electric Type)(N)
-
Maximum Gripping Force (Closing Side, Electric Type)(N)
-
Environment, Applications
-
Additional Functions
-
Stroke Adjustment Mechanism
Narrow search by specifying Manufacturer
-
- SMC (38)
- KONDO (36)
- CKD (15)
- PISCO (13)
- MEG (6)
- AIRTAC (3)
- KOGANEI (1)
- FESTO (0)
- ORIENTAL MOTOR (0)
CAD
-
- 2D
- 3D
Related Categories to Hands, Grippers
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy