(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Hands, Grippers（Gripping Methods：Open, Parallel Type）
| Days to Ship |
|
|---|
-
Air Gripper, Parallel Type / Standard Type MHZ2 Series
SMC
SMC Parallel Type Air Gripper.
[Features]
· Uses a linear guide for high rigidity and high precision.Standard Price: MYR 839.77- Days to Ship: 3 Day(s) or more -
Air Gripper (Parallel Opening And Closing Type, Wide Type) HFT Series
AIRTAC
[Features]
・ It is easy to pinch long strokes and large volume workpieces.
・ A large holding force is realized by the double piston structure.
・ Since the rack and pinion are used, the grippers open and close at the same time, improving repeatability.
・ All series are with magnet, convenient for control.Standard Price: MYR 388.57- Days to Ship: 20 Day(s) or more -
Electric Gripper, 2-Finger Type, LEHF Series
SMC
Electric gripper for a variety of workpieces with a long stroke.
[Features]
· Step motor (servo 24 V DC).
· Easy to complete setup with 2 items, namely, position and thrust.
· Controllers are shipped with the setup for actuator specifications (the actuator and controller are sold as a package).
· With drop prevention function.
· Self-lock mechanism reduces power consumption.
· With gripping check function.
· Possible to set position, speed and force (64 points).
*Values inside parentheses () are for long stroke.Days to Ship: 14 Day(s) or more -
Parallel Type Air Gripper, Long Stroke MHZL2 Series
SMC
[Features]
· Accommodates diverse workpiece diameters with a single unit.
· Nearly double the standard stroke.
· Long stroke, yet also compact and lightweight.Days to Ship: 3 Day(s) or more -
Hand Small Crossed Roller Parallel Hand BHG Series
KONDO
Cross roller parallel hand with rubber cover.
[Features]
· Improves environment resistant by attaching a rubber cover to prevent invasion of mist and dust.
· Cross roller bearing holding mechanism is used in the sliding area.
· Smooth movement.with high precision.
· Endures compact and large moment load by over wrapping and long holding mechanism.
· Supports clean room.
· Supports class 10 and class 1000Standard Price: MYR 1,467.96- Days to Ship: 9 Day(s) or more -
Air Gripper, Parallel Style, Wide Opening, MHL2 Series
SMC
[Features]
· Long stroke.
· Accommodates diverse workpiece diameters with a single unit.
· A compact design in which a large amount of gripping force is provided through the use of a double piston mechanism.
· Double-end type oil-impregnated resin bearings with a metal backing are used for all shafts.
· Built-in dust protection mechanism.
· High degree of mounting flexibility.
· Can be equipped with an auto switch.Days to Ship: 2 Day(s) or more -
SMC
Rotary gripper suitable for holding and reversing workpieces on transfer lines.
[Features]
· Compact integration of gripping with rotation functions.
· Eliminates whirling of the piping and wiring caused by combining individual products (rotary table + adapter + air gripper).
· Compared with combined products, the longitudinal dimension is approximately 20% shorter.
· 2 types of angle rotation (90° and 180°) are now standard.
· Auto switches can be retrofitted using the magnet (equipped as standard).Standard Price: MYR 2,469.28- Days to Ship: 3 Day(s) or more -
Long-Stroke Parallel Hand, Thin Type, HLC Series
KONDO
High resistant thin long stroke type by adopting linear guide.
[Features]
· Linear guide with thin long stroke.
· Thin and large open/close stroke.
· Double piston system with thin and high torque.
· Increases resistance by adopting the linear guide.
· High rigidity with long guide pitch of linear guide.
· Wide range of variation depending on its specification.
· Please select it based on 6 sizes and 11 types of stroke specification.
· Easy mounting on the front side through holeStandard Price: MYR 2,129.58- Days to Ship: 22 Day(s) or more -
MISUMI
A space saving, compact air chuck with high precision, high stiffness, and strong gripping force.
Standard Price: MYR 542.86- Days to Ship: 1 Day(s) or more -
Parallel hand ultra-compact cross roller hand BSA2 series
CKD
Supports handling with a large selection including thin, light weight, wide stroke, high precision types, etc. Note: CAD data of this series is being revised. Please wait till the corrections are done.
- CAD ：
- 2D
Days to Ship: 21 Day(s) or more -
Hand Crossed Roller Parallel Hand HK Series
KONDO
Smooth operation with bearing mechanism.
[Features]
· High precision and smooth operation with the cross roller guide.
· Cross roller bearing mechanism is used for the slide part.
· Smooth movement.with high precision.
· Compact and high rigidity.
· Endures compact and large moment load by over wrapping and long holding mechanism.
· Improves resistant environment with rubber cover (option).
· Prevents mist and dust invasion by installing the rubber cover with the slide part and increases the resistance to environment
· Sensor supported cutting oil resistant can be mounted.
· Supplied brackets are not needed.Standard Price: MYR 2,553.71- Days to Ship: 22 Day(s) or more -
Parallel Open/Close Type Air Chuck Standard Type Compact (Without Auto Switch) MHZA/MHZAJ2-6 Series
SMC
· Uses a linear guide for high rigidity and high precision.
Standard Price: MYR 839.71- Days to Ship: 3 Day(s) or more -
Parallel Type Air Gripper With Dust Cover MHZJ2 Series
SMC
[Features]
· Prevents the ingress of cutting chips, dust, water, etc.
· Prevents dispersion of grease, and external leakage of dust.Days to Ship: 3 Day(s) or more -
Auto Hand Changing System (AHC), MA3 Series
SMC
The AHC system changes robot hand tools automatically to accommodate workpieces of different shapes, thus making it possible to adopt FMS on the assembly line.
[Features]
· No adjustment or teaching required when changing tools.
· Accelerated launch of assembly lines.Standard Price: MYR 1,393.76- Days to Ship: 27 Day(s) or more -
SMC
[Rechargeable battery compatible series]
Copper (Cu) and zinc (Zn) materials are not used to reduce product defects in the rechargeable battery manufacturing process.
Some aluminum alloys and die-cast aluminum materials contain small amounts of copper (Cu) and zinc (Zn) as additive elements.
Electrolytic nickel plating and zinc plating with copper base are not used. (Electrolytic nickel plating is used. )
This product uses low dew point compatible grease, can be used at -70°C, improved performance in low dew point environment.Days to Ship: 15 Day(s) or more -
MEG
[Features]
・ 3 types of cylinder diameters ø8, ø12, and ø18 are available for single action, double-acting, and mechanical. You can choose according to the application
・ Wide range of holding specifications with one body. Can be used for both outer and inner diameter grips by simply changing the position of the clawsStandard Price: MYR 849.74- Days to Ship: 10 Day(s) or more -
Parallel Hand, Small Cross Roller Hand, BHA/BHG Series
CKD
Supports handling with a large selection including thin, light weight, wide stroke, high precision types, etc. Note: CAD data of this series is being revised. Please wait till the corrections are done.
Days to Ship: 25 Day(s) or more -
KONDO
Cam type without combination adjustment need.
[Features]
· Special cam type without combination adjustment need.
· Parallel movement: Parallel type with bearing and special cam and efficient holding force with 15% increase.
· Long running stroke: Light weight and compact design with long combination range of 8 mm stroke for easy handling.Standard Price: MYR 1,467.96- Days to Ship: 9 Day(s) or more -
Linear Slide Hand LSH-HP Series
CKD
[Features]
・ By increasing the guide stiffness compared to the conventional product, the allowable moment has been increased
・ High stiffness and high accuracy has been achieved due to the integrated structure of the guide rail and finger
・ Optimized seal design. The sliding technology has been mastered to achieve double the durability of conventional products
・ Centering accuracy can be easily reproduced by adding a "positioning hole" based on the gripping center
・ The rail plate allows the switch to be replaced with the hand attached to the robot / equipmentStandard Price: MYR 1,674.84- Days to Ship: 26 Day(s) or more -
CKD
[Features]
・ The shockless type gently grips workpieces even at high speeds.
・ Built-in shock absorption mechanism (option): shock is suppressed to approx. 1/30.Standard Price: MYR 819.95- Days to Ship: 11 Day(s) or more -
Ultra Low Profile Parallel Gripper HLD Series
CKD
[Features]·This is the thinnest linear guide with high stiffness. ·A powerful gripping force has been achieved.
Standard Price: MYR 2,727.21- Days to Ship: 11 Day(s) or more -
MEG
Wide range of holding specifications with 1 body. Depending on where the jaws are attached, it is possible to grip the outer diameter and inner diameter.
Standard Price: MYR 799.64 Days to Ship: 9 Day(s) or more -
MEG
Highest gripping strength in the industry with industry lightest and 4 mm strokes (our own research)
Standard Price: MYR 799.07- Days to Ship: 10 Day(s) or more -
Hand rubber cover thin model parallel hand (cross-roller type) HLBG series
KONDO
Thin parallel hand with rubber cover.
[Features]
· Cross roller type.
· Bearing guide with cross roller type and achieves smooth and high precision operation.
· Compact and long stroke.
· Compact design with low height.
· Stroke is long and support combination of large and small works.
· Improves resistant environment with rubber cover.
· Prevents mist and dust invasion by installing the rubber cover with the slide part and increases the resistance to environmentStandard Price: MYR 2,090.00- Days to Ship: 22 Day(s) or more -
Hand Large Gripping Force Parallel Hand HH Series
KONDO
Parallel hand with light weight and high holding force.
[Features]
· Parallel hand with light weight and high holding force.
· Saving space: No need of space when mounting hand with low overall height.
· Light weight and large holding force: Can choose a robot one rank lower compared to the traditional product.
· High rigidity and high resistance: Impact resistance T type slide guide.Standard Price: MYR 12,939.81- Days to Ship: 27 Day(s) or more -
SMC
[Rechargeable battery compatible series]
Copper (Cu) and zinc (Zn) materials are not used to reduce product defects in the rechargeable battery manufacturing process.
Some aluminum alloys and die-cast aluminum materials contain small amounts of copper (Cu) and zinc (Zn) as additive elements.
Electrolytic nickel plating and zinc plating with copper base are not used. (Electrolytic nickel plating is used. )
This product uses low dew point compatible grease, can be used at -70°C, improved performance in low dew point environment.Standard Price: MYR 1,046.94- Days to Ship: 27 Day(s) or more -
SMC
[11-Series Clean Series]
・ This product can be used in a clean environment
・ Prevents dust generation in the cleanroom
[20-series Copper-Free/Fluorine-Free Specifications]
・ It can be used in environments where copper and fluorine materials should be avoided
・ External dimensions are the same as standard products
[22-Series, Copper-Free / Fluorine-Free / Silicone-Free + Low Dust Generation]
・ This product can be used in environments with restrictions on copper-based, fluorine-based, and silicone-based materials
・ The structure is the same as the Clean Series (Grease and packaging are different from the Clean Series)Days to Ship: 3 Day(s) or more -
SMC
[11-Series Clean Series]
・ This product can be used in a clean environment
・ Prevents dust generation in the cleanroom
[22-Series, Copper-Free / Fluorine-Free / Silicone-Free + Low Dust Generation]
・ This product can be used in environments with restrictions on copper-based, fluorine-based, and silicone-based materials
・ The structure is the same as the Clean Series (Grease and packaging are different from the Clean Series)Days to Ship: 21 Day(s) or more -
CKD
[Features]
· Supports handling with wide range of products including thin, light weight, wide stroke and high precision type, etc.
· This series is under revision of the CAD data.
· Please wait until revision is completed.- CAD ：
- 2D
Days to Ship: 21 Day(s) or more -
Crossed Roller Parallel Hand HKP Series
CKD
Supports handling with a large selection including thin, light weight, wide stroke, high precision types, etc. Note: CAD data of this series is being revised. Please wait till the corrections are done.
- CAD ：
- 2D
Days to Ship: 27 Day(s) or more -
Parallel Hand, Linear Guide Hand, LHA Series
CKD
Supports handling with a large selection including thin, light weight, wide stroke, high precision types, etc. Note: CAD data of this series is being revised. Please wait till the corrections are done.
- CAD ：
- 2D
Days to Ship: 17 Day(s) or more -
Thin Parallel Hand, HLA/HLB Series
CKD
Supports handling with a large selection including thin, light weight, wide stroke, high precision types, etc. Note: CAD data of this series is being revised. Please wait till the corrections are done.
Standard Price: MYR 1,091.03 Days to Ship: 9 Day(s) or more -
Hand, Crab Type Parallel Hand, HF Series
KONDO
Strong compact tool not needing combination adjustment.
Standard Price: MYR 3,334.10- Days to Ship: 27 Day(s) or more -
HLAG Series Bushing Type Rubber-coated Slim Parallel Hand
KONDO
Thin and compact parallel hand.
[Features]
· Thin and compact parallel hand.
· High impact resistant bush guide is used.
· Compact design with low height.
· Long running stroke with nail and no need for combination adjustment.
· Prevents mist and dust invasion by installing the rubber cover with the slide part and increases the resistance to environmentStandard Price: MYR 1,185.20- Days to Ship: 22 Day(s) or more -
Standard Price: MYR 1,637.60- Days to Ship: 27 Day(s) or more -
Hand mini parallel hand HMA series
KONDO
Compact size with light weight and small.
[Features]
· Compact size with light weight and small.
· Compact body with integration.
· Simplified with cylinder integrated structure.
· Lower price.
· Wide variety.
· HMA5 models (ø10, ø12, ø16, ø20, ø25) have been added, along with other series, for a total of 24 models ranging in cylinder diameters of between ø10 and ø100.
· Supports any works.
· Wide range of options.
· Can mount switch confirming open/closeStandard Price: MYR 1,015.56- Days to Ship: 22 Day(s) or more -
KONDO
Hand pursued by high resistance associated with speeding up the equipment.
[Features]
· Hand pursued by high resistance associated with speeding up the equipment.
· High rigidity, high precision, and long life by adopting an unity form of linear guide.
· Supports long nails.
· Supports low sliding (option).
· Centering precision ±0.05 mm (option).
· Supports rubber cover (option).
· New L1 series with running stroke doubledStandard Price: MYR 1,224.79- Days to Ship: 9 Day(s) or more -
Hand long stroke parallel hand HG series
KONDO
Stroke focused and full force with light weight and compact.
[Features]
· Stroke focused and full force with light weight and compact.
· Super long stroke hand.
· Super long stroke by increasing cam ratio.
· Light weight and compact.
· Light weight and compact body.
· Thin for easy handling.
· Easy mounting.
· Mounting from any direction with 3 directions of mounting surface.
· Sensor confirming open/close.
· Mounting switch in 2 locations with all models of the seriesStandard Price: MYR 3,390.65- Days to Ship: 27 Day(s) or more -
Hand thin-type long stroke hand HLF series
KONDO
Thin, light weight and low price. 25% of height and 30% of weight DOWN compared to the traditional products.
[Features]
· Thin and light weight.
· 25% of height DOWN and 30% of weight DOWN.
· High holding force.
· Large holding force with the double piston system.
· Mounting from 4 directions.
· Body is mounted by the body mounting tap in 4 directions and through hole in 1 direction.
· Long stroke.
· Supports even with many kinds of works.
· Supports sensors confirming various open/close.
· Supports contact-less sensor, contact sensor and cutting oil supporting sensorStandard Price: MYR 1,750.71- Days to Ship: 22 Day(s) or more -
Thin Parallel Hand (Cross Roller Type) HLB Series
KONDO
Thin parallel hand with smooth operation and high precision. Compact and long stroke.
Standard Price: MYR 1,920.36- Days to Ship: 22 Day(s) or more -
Hand Thin Model Parallel Hand (Bush Type) HLA Series
KONDO
Thin and compact parallel hand.
[Features]
· Bush guide.
· High impact resistant bush guide is used.
· Supports combination of large and small works.
· Compact design with low height.
· Long running stroke of nail and no need for combination adjustmentStandard Price: MYR 1,015.56- Days to Ship: 9 Day(s) or more -
Hand ultra small cross-roller parallel hand BSA series
KONDO
Super small type with multiple mountings.
[Features]
· Super small type with multiple mountings.
· Super small parallel hand: Overall length of 50 mm.
· Width of 25 mm.
· Super small type with only 10 mm of thinness.
· Suitable with delivery and assembly of small work.
· Easy mounting: Side surface mounting (tap and run through hole) and top surface mounting (tap).
· Multiple mounting where multiple works are locked at the same time.
· High precision and smooth operation with cross roller guide: Cross roller guide is used in the slide part.
· High precision and smooth operation with pre-load and without rattle.Standard Price: MYR 1,026.86- Days to Ship: 27 Day(s) or more -
Hand side parallel hand HC series
KONDO
Full force of thin, light weight and compact.
[Features]
· Full force of thin, light weight and compact.
· No need of combination adjustment: No inconvenient adjustment needed with long nail of running stroke and parallel clamp (centripetal movement).
· Easy mounting: 3 directions of mounting surface and any direction of mounting is possible.
· Thin, light weight and compact: Thin body for easy treatment.
· And light weight and compact.
· Standard of bearing specification.
· Sensor conforming open/close: Mounting switch in 2 locations with all models of the series.Standard Price: MYR 2,033.45- Days to Ship: 27 Day(s) or more -
Parallel Hand, Small Crab Type, HMF Series
KONDO
Crab type parallel hand with low height and a wide range of combination.
Standard Price: MYR 1,524.50- Days to Ship: 22 Day(s) or more -
Hand Small Crossed Roller Parallel Hand BHA Series
KONDO
[Features]
· Smooth movement and powerful holding force.
· High precision and smooth movement with cross roller guide: Cross roller guide is place in the slide part.
· High precision and smooth operation with pre-load and without rattle, can move with 1MPa.
· Compact and powerful holding force: Endures large moment load by over wrapping the slide part with long holding mechanism.
· Mount sensor conforming open/close: Mount contact less switch in 2 locations with all models.Standard Price: MYR 1,298.31- Days to Ship: 9 Day(s) or more
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Number of Fingers |
| Main Body Shape |
| Gripping Methods |
| Operation Method |
| Open Dimension L1(mm) |
| Closed Dimension L2(mm) |
| Type |
| Gripping Force (when 0.5Mpa at closing)(N) |
| Gripping Force (when 0.5Mpa at opening)(N) |
| Maximum Gripping Force (Opening Side, Electric Type)(N) |
| Maximum Gripping Force (Closing Side, Electric Type)(N) |
| Environment, Applications |
| Additional Functions |
| Stroke Adjustment Mechanism |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | SMC | AIRTAC | SMC | SMC | KONDO | SMC | SMC | KONDO | MISUMI | CKD | KONDO | SMC | SMC | SMC | SMC | MEG | CKD | KONDO | CKD | CKD | CKD | MEG | MEG | KONDO | KONDO | SMC | SMC | SMC | CKD | CKD | CKD | CKD | KONDO | KONDO | KONDO | KONDO | KONDO | KONDO | KONDO | KONDO | KONDO | KONDO | KONDO | KONDO | KONDO |
| Product Series | Air Gripper (Parallel Opening And Closing Type, Wide Type) HFT Series | Parallel Open/Close Type Air Chuck Standard Type Compact (Without Auto Switch) MHZA/MHZAJ2-6 Series | Hand rubber cover thin model parallel hand (cross-roller type) HLBG series | ||||||||||||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||
| Days to Ship | 3 Day(s) or more | 20 Day(s) or more | 14 Day(s) or more | 3 Day(s) or more | 9 Day(s) or more | 2 Day(s) or more | 3 Day(s) or more | 22 Day(s) or more | 1 Day(s) or more | 21 Day(s) or more | 22 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more | 27 Day(s) or more | 15 Day(s) or more | 10 Day(s) or more | 25 Day(s) or more | 9 Day(s) or more | 26 Day(s) or more | 11 Day(s) or more | 11 Day(s) or more | 9 Day(s) or more | 10 Day(s) or more | 22 Day(s) or more | 27 Day(s) or more | 27 Day(s) or more | 3 Day(s) or more | 21 Day(s) or more | 21 Day(s) or more | 27 Day(s) or more | 17 Day(s) or more | 9 Day(s) or more | 27 Day(s) or more | 22 Day(s) or more | 27 Day(s) or more | 22 Day(s) or more | 9 Day(s) or more | 27 Day(s) or more | 22 Day(s) or more | 22 Day(s) or more | 9 Day(s) or more | 27 Day(s) or more | 27 Day(s) or more | 22 Day(s) or more | 9 Day(s) or more |
| Number of Fingers | 2 pcs. | 2 pcs. | 2 pcs. | 2 pcs. | 2 pcs. | 2 pcs. | 2 pcs. | 2 pcs. | 2 pcs. | 2 pcs. | 2 pcs. | 2 pcs. | 2 pcs. | 2 pcs. | 2 pcs. | 2 pcs. | 2 pcs. | 2 pcs. | 2 pcs. | 2 pcs. | 2 pcs. | 2 pcs. | 2 pcs. | 2 pcs. | 2 pcs. | 2 pcs. | 2 pcs. | 2 pcs. | 2 pcs. | 2 pcs. | 2 pcs. | 2 pcs. | 2 pcs. | 2 pcs. | 2 pcs. | 2 pcs. | 2 pcs. | 2 pcs. | 2 pcs. | 2 pcs. | 2 pcs. | 2 pcs. | 2 pcs. | 2 pcs. | 2 pcs. |
| Main Body Shape | Square Shape | Square Shape (Wide) | Square Shape / Lateral Shape | Square Shape | Square Shape | Square Shape (Wide) | Cylindrical Shape | Square Shape (Flat Shape) | Square Shape | Square Shape | Square Shape | Square Shape | Square Shape | Square Shape | Square Shape (Wide) | Square Shape | Square Shape | Square Shape / Cylindrical Shape | Square Shape | Square Shape | Square Shape | Square Shape | Square Shape | Square Shape | Square Shape | Square Shape | Square Shape (Wide) | Square Shape | Square Shape | Square Shape | Square Shape | - | Square Shape (Wide) | Square Shape | Square Shape | Square Shape | Square Shape | Square Shape | Square Shape (Flat Shape) | Square Shape | Square Shape | Square Shape | Lateral Shape | Square Shape (Wide) | Square Shape |
| Gripping Methods | Open, Parallel Type | Open, Parallel Type | Open, Parallel Type | Open, Parallel Type | Open, Parallel Type | Open, Parallel Type | Open, Parallel Type | Open, Parallel Type | Open, Parallel Type | Open, Parallel Type | Open, Parallel Type | Open, Parallel Type | Open, Parallel Type | Open, Parallel Type | Open, Parallel Type | Open, Parallel Type | Open, Parallel Type | Open, Parallel Type | Open, Parallel Type | Open, Parallel Type | Open, Parallel Type | Open, Parallel Type | Open, Parallel Type | Open, Parallel Type | Open, Parallel Type | Open, Parallel Type | Open, Parallel Type | Open, Parallel Type | Open, Parallel Type | Open, Parallel Type | Open, Parallel Type | Open, Parallel Type | Open, Parallel Type | Open, Parallel Type | Open, Parallel Type | Open, Parallel Type | Open, Parallel Type | Open, Parallel Type | Open, Parallel Type | Open, Parallel Type | Open, Parallel Type | Open, Parallel Type | Open, Parallel Type | Open, Parallel Type | Open, Parallel Type |
| Operation Method | Double Acting Type / Single Acting Type (Normally Open) / Single Acting Type (Normally Closed) | Double Acting Type | Double Acting Type | Double Acting Type / Single Acting Type (Normally Closed) | Double Acting Type / Single Acting Type (Normally Closed) | Double Acting Type | Double Acting Type / Single Acting Type (Normally Closed) | - | Double Acting Type / Single Acting Type (Normally Open) | Double Acting Type / Single Acting Type (Normally Open) / Single Acting Type (Normally Closed) | Double Acting Type / Single Acting Type (Normally Closed) | Double Acting Type / Single Acting Type (Normally Closed) | Double Acting Type / Single Acting Type (Normally Open) / Single Acting Type (Normally Closed) | Single Acting Type (Normally Closed) | Double Acting Type | Double Acting Type / Single Acting Type (Normally Open) | Double Acting Type / Single Acting Type (Normally Open) / Single Acting Type (Normally Closed) | Double Acting Type / Single Acting Type (Normally Closed) | Double Acting Type / Single Acting Type (Normally Closed) | Double Acting Type | Double Acting Type | Single Acting Type (Normally Open) | Single Acting Type (Normally Open) | - | - | Double Acting Type | Double Acting Type | Double Acting Type | - | Double Acting Type / Single Acting Type (Normally Open) / Single Acting Type (Normally Closed) | Double Acting Type / Single Acting Type (Normally Open) / Single Acting Type (Normally Closed) | Double Acting Type | - | - | - | Double Acting Type / Single Acting Type (Normally Closed) | Double Acting Type / Single Acting Type (Normally Closed) | Double Acting Type / Single Acting Type (Normally Closed) | - | - | - | Double Acting Type / Single Acting Type (Normally Closed) | - | - | Double Acting Type / Single Acting Type (Normally Closed) |
| Open Dimension L1(mm) | 5 ～ 60 | 98 ～ 266 | 16 ～ 80 | 19.2 ～ 41.3 | - | 76 ～ 486 | 15.2 ～ 33.3 | - | - | 14 | - | 12 | 12 ～ 60 | 12.6 ～ 26.3 | 76 ～ 486 | 6.8 ～ 8 | 15 ～ 30 | - | 12 ～ 33.3 | 15.2 ～ 33.3 | 48 ～ 92 | 6.8 ～ 12.8 | 8 ～ 12 | - | - | 15.2 ～ 60 | 76 ～ 486 | 9.7 ～ 33.3 | 7 ～ 22 | 42 ～ 70 | 20 | 30 | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Closed Dimension L2(mm) | 1 ～ 30 | 68 ～ 166 | 0 | 11.2 ～ 19.3 | - | 56 ～ 286 | 11.2 ～ 19.3 | - | - | 10 | - | 8 | 8 ～ 30 | 6.6 ～ 16.3 | 56 ～ 286 | 12 ～ 12.8 | 9 ～ 15 | - | 8 ～ 19.3 | 11.2 ～ 19.3 | 34 ～ 62 | 6.8 ～ 12.8 | 8 ～ 12 | - | - | 11.2 ～ 30 | 56 ～ 286 | 5.7 ～ 19.3 | 0 | 10 ～ 28 | 0 | 15 | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Type | Main Body | Main Body | Main Body(Electric Type) | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Related Components | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body |
| Gripping Force (when 0.5Mpa at closing)(N) | 1.9 ～ 254 | - | - | 11 ～ 65 | - | 14 ～ 396 | 10 ～ 68 | - | - | - | - | 3.3 | 1.9 ～ 254 | - | 14 ～ 396 | 5.2 ～ 16 | - | - | 3.3 ～ 65 | 11 ～ 65 | - | 9.5 | 5.7 | - | - | 11 ～ 254 | 14 ～ 396 | 9.8 ～ 65 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Gripping Force (when 0.5Mpa at opening)(N) | 3.7 ～ 318 | - | - | 13 ～ 104 | - | 14 ～ 396 | 13 ～ 100 | - | - | - | - | 3.7 ～ 6.1 | 3.7 ～ 318 | 48 ～ 68 | 14 ～ 396 | 5.2 ～ 16 | - | - | 3.7 ～ 104 | 17 ～ 104 | - | 9.5 | 5.7 | - | - | 17 ～ 318 | 14 ～ 396 | 17 ～ 104 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Maximum Gripping Force (Opening Side, Electric Type)(N) | - | - | 7 ～ 180 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Maximum Gripping Force (Closing Side, Electric Type)(N) | - | - | 7 ～ 180 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Environment, Applications | Standard | Standard | Standard | Standard | Standard / Dust Resistant / Drip Resistant | Dust Resistant | Standard | Standard | Standard | Standard | Standard | Standard | Standard / Dust Resistant / Drip Resistant | Standard | Dust Resistant | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard / Dust Resistant / Drip Resistant | Standard | Standard | Available in Cleanroom Environment / Copper-free/Fluorine-free Specification | Available in Cleanroom Environment / Copper-free/Fluorine-free Specification | Standard | - | Standard | Standard | Standard | Standard / Dust Resistant / Drip Resistant | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard |
| Additional Functions | With Linear Guide / High Accuracy | Not Provided | With Linear Guide / High Accuracy / Fall Prevention / Stroke Adjustment Function / Control of Gripping Force / Speed control | With Linear Guide / High Accuracy | Bearing Support / High Accuracy | Bearing Support | Not Provided | With Linear Guide | Not Provided | Bearing Support / High Accuracy | Bearing Support / High Accuracy | With Linear Guide / High Accuracy | With Linear Guide / High Accuracy | Not Provided | Not Provided | Not Provided | Bearing Support / High Accuracy | Bearing Support | With Linear Guide / High Accuracy | With Linear Guide / High Accuracy / Stroke Adjustment Function | Not Provided | Not Provided | Not Provided | High Accuracy | Not Provided | With Linear Guide | Not Provided | With Linear Guide | Bearing Support / High Accuracy | Not Provided | With Linear Guide / High Accuracy | Not Provided | Not Provided | Not Provided | High Accuracy | Not Provided | With Linear Guide / High Accuracy | Not Provided | Not Provided | High Accuracy | Not Provided | High Accuracy | Not Provided | Not Provided | High Accuracy |
| Stroke Adjustment Mechanism | Not Provided | Not Provided | Open/Close Dual Adjustment | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Open/Close Dual Adjustment | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided / Open Direction Adjustment / Close Direction Adjustment / Open/Close Dual Adjustment | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided / Open Direction Adjustment / Close Direction Adjustment / Open/Close Dual Adjustment | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided |
Loading...
Configure
Specification/Dimensions
-
Number of Fingers
- 2 pcs.
- 3 pcs.
- Others
-
Main Body Shape
-
Gripping Methods
-
Operation Method
- Double Acting Type
- Single Acting Type (Normally Open)
- Single Acting Type (Normally Closed)
-
Open Dimension L1(mm)
- 4
- 5
- 5.4
- 6
- 6.8
- 7
- 7.4
- 7.8
- 8
- 9.4
- 9.5
- 9.7
- 10
- 10.8
- 11
- 11.6
- 11.8
- 12
- 12.5
- 12.6
- 12.8
- 13
- 13.4
- 13.5
- 14
- 15
- 15.2
- 15.5
- 16
- 17
- 17.2
- 17.5
- 18
- 18.5
- 19
- 19.2
- 19.5
- 19.6
- 20
- 20.6
- 20.9
- 21.5
- 22
- 22.8
- 23.5
- 24
- 25
- 26
- 26.3
- 26.5
- 26.9
- 27
- 28
- 28.6
- 30
- 30.5
- 31
- 32
- 33
- 33.3
- 34
- 34.3
- 35
- 35.5
- 36
- 37
- 38
- 40
- 41
- 41.3
- 42
- 43
- 44
- 47.5
- 48
- 48.5
- 51
- 52
- 53.5
- 59
- 60
- 62
- 63.5
- 64
- 65
- 67
- 68
- 70
- 73
- 76
- 78
- 80
- 80.5
- 82
- 92
- 98
- 102
- 103
- 114
- 118
- 122
- 132
- 134
- 138
- 150
- 156
- 166
- 170
- 172
- 186
- 204
- 210
- 220
- 222
- 226
- 238
- 262
- 266
- 278
- 282
- 288
- 298
- 318
- 320
- 336
- 402
- 406
- 486
-
Closed Dimension L2(mm)
- 0
- 1
- 1.4
- 1.6
- 2
- 3
- 5
- 5.5
- 5.7
- 6.6
- 6.8
- 7
- 7.2
- 7.5
- 7.8
- 8
- 8.5
- 8.8
- 9
- 9.5
- 10
- 10.5
- 10.8
- 11
- 11.2
- 11.5
- 11.8
- 12
- 12.8
- 13
- 13.5
- 14
- 14.5
- 14.6
- 14.9
- 15
- 16
- 16.3
- 16.5
- 17.5
- 18
- 18.5
- 19
- 19.3
- 19.5
- 20
- 21
- 22
- 23
- 23.5
- 24
- 25
- 26
- 28
- 28.5
- 30
- 31
- 31.5
- 33
- 34
- 35
- 36
- 37
- 37.5
- 38
- 41
- 42
- 43
- 44
- 45
- 45.5
- 46
- 48
- 51
- 53.5
- 54
- 56
- 60.5
- 62
- 63
- 66
- 68
- 70
- 72
- 78
- 79
- 82
- 84
- 86
- 94
- 96
- 98
- 100
- 110
- 112
- 116
- 124
- 126
- 130
- 142
- 146
- 150
- 158
- 162
- 166
- 178
- 182
- 188
- 198
- 200
- 216
- 242
- 246
- 286
-
Type
- Main Body
- Related Components
- Main Body(Electric Type)
-
Gripping Force (when 0.5Mpa at closing)(N)
- 0.08
- 0.20
- 1,240
- 1,270
- 1.2
- 1.9
- 2
- 2.4
- 3,600
- 3.2
- 3.3
- 3.4
- 5.2
- 5.7
- 6,300
- 6.3
- 6.5
- 7
- 7.1
- 8
- 9
- 9.5
- 9.6
- 9.8
- 10
- 10,600
- 11
- 12
- 13
- 14
- 14.3
- 15
- 16
- 17
- 17.5
- 19
- 21
- 23
- 24
- 25
- 26
- 27
- 28
- 29.2
- 29.4
- 30
- 31
- 32
- 33
- 34
- 36
- 37
- 41
- 42
- 45
- 46
- 47
- 48
- 49
- 50
- 53
- 53.7
- 55
- 56
- 58
- 62
- 63
- 65
- 68
- 69
- 74
- 75
- 79
- 80
- 88
- 90
- 94.9
- 97
- 111
- 118
- 130
- 131
- 140
- 141
- 144
- 153.1
- 155
- 158
- 177
- 187
- 217
- 228
- 251
- 254
- 280
- 335
- 396
- 400
- 500
- 502
- 750
-
Gripping Force (when 0.5Mpa at opening)(N)
- 0.08
- 0.20
- 1,320
- 2
- 3.2
- 3.7
- 5.2
- 5.7
- 6.1
- 6.5
- 7.8
- 9.5
- 11
- 12
- 12.3
- 13
- 14
- 15
- 16
- 17
- 18
- 19
- 21
- 21.2
- 22
- 23
- 25
- 26
- 28
- 30
- 31
- 32
- 33
- 34
- 35
- 36
- 36.5
- 38
- 40
- 42
- 44
- 45
- 46
- 47
- 48
- 49
- 53
- 56
- 57
- 59
- 61
- 63
- 66
- 68
- 71
- 73
- 74
- 77
- 82
- 83
- 85
- 86
- 90
- 97
- 100
- 104
- 108
- 118
- 123
- 127
- 130
- 131
- 139
- 141
- 153
- 161
- 169
- 187
- 193
- 195
- 204
- 227
- 228
- 247
- 267
- 268
- 279
- 306
- 318
- 329
- 359
- 396
- 490
- 525
- 537
- 780
-
Maximum Gripping Force (Opening Side, Electric Type)(N)
-
Maximum Gripping Force (Closing Side, Electric Type)(N)
-
Environment, Applications
-
Additional Functions
-
Stroke Adjustment Mechanism
Narrow search by specifying Manufacturer
-
- KONDO (19)
- SMC (19)
- CKD (9)
- MEG (3)
- AIRTAC (1)
- FESTO (0)
- ORIENTAL MOTOR (0)
- KOGANEI (0)
- PISCO (0)
CAD
-
- 2D
- 3D
Related Categories to Hands, Grippers
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy