(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Rotary Actuators（Torque：Less than 1）
| Days to Ship |
|
|---|
-
Rotary Actuator, Vane Type, CRB2 Series
SMC
Can be combined freely with many kinds of unit.
[Features]
· Piping port parts are located on the flat section.
· Many variations of shaft-end shape (6 types).
· Works with the compact auto switch D-M9□ type.Standard Price: MYR 495.81- Days to Ship: 3 Day(s) or more -
LER Series Electric Rotary Table
SMC
Low-profile rotary actuator.
[Features]
· Positioning repeatability: ±0.03° (high-precision type).
· Rotation angle: 320° (310°), 180°, 90°. *The value in parentheses is for the LER10.
· Shockless / high-speed actuation.
· Possible to set speed, acceleration/deceleration and positioning up to 64 points.
· Energy-saving product: Automatic 40% power reduction after the table has stopped.
· Step motor (servo 24 V DC).Days to Ship: 3 Day(s) or more -
Rotary Table, Rack And Pinion Type, MSQ Series (Size 1, 2, 3, 7)
SMC
Thin-profile type rotary table unit with low table height.
[Features]
· Easy mounting of workpieces.
· Large rolling element bearings.
· Angle adjustment range: 0 to 190°.
· Easy mounting of main body.
· Uses high precision bearings.
· Movement in direction of table's radial thrust: 0.01 mm or less.
· Piping from end or side.
· Features a space-saving design with a reduced body size and less space required for piping and wiring.Days to Ship: 3 Day(s) or more -
Small High Rotor / Standard Type, PRNA Series (Single Vane / Double Vane)
PARKERKURODA
Prevents air leakage, improves the minimum operating pressure from 0.2MPa to 0.1MPa, and doubles the maximum oscillation time, thereby increasing the scope of possible applications. 2MPato 0.1MPa and extends the longest oscillating time to 2 times more than traditional. Controls ejection phenomenon to obtain smooth operation.
- CAD ：
- 2D
Standard Price: MYR 745.98- Days to Ship: 7 Day(s) or more -
LER Series Electric Rotary Table, Continuous Rotation Specification
SMC
Shockless / high-speed rotary actuator.
[Features]
· Positioning repeatability: ±0.03° (high-precision type).
· Rotation angle: 360°.
· Possible to set speed, acceleration/deceleration and positioning up to 64 points.
· Energy-saving product: Automatic 40% power reduction after the table has stopped.
· Step motor (servo 24 V DC).
· RoHS compliant.Days to Ship: 14 Day(s) or more -
MSUA Series Rotary Table: High-Precision Type, Vane Type
SMC
A rotary actuator with a lightweight and compact table, suitable for robot hands.
[Features]
· High precision and high rigidity.
· Improved table deflection accuracy: 0.03 mm or less.
· Easy alignment when mounting the load.
· Easy alignment when mounting the body.
· Angle adjustable.
· Disengageable.
· Auto switch capable.
· Vane type.Days to Ship: 14 Day(s) or more -
Rotary Table, Rack And Pinion Type, MSQ Series (Size 10 And Up)
SMC
SMC Rotary Actuator
[Features]
· Easy mounting of workpiece
· Large rolling element bearings
· Angle adjustment range: 0 to 190°
· Easy mounting of body
· Movement in direction of table's radial thrust: 0.01 mm or less
· End face and side piping possibleStandard Price: MYR 1,841.96- Days to Ship: 3 Day(s) or more -
Mini Rotary Actuator CRJ Series
SMC
SMC rotary actuator
[Features]
· Compact and lightweight
· Flexible mounting
Can be mounted from the top, bottom or sides
· Supports both front and side porting
· Improved allowable load
Uses a large roller bearing and large diameter output shaft
to ensure improved compactness and rigidity
· Even with a single-rack design, its special construction helps minimize backlash from the output shaftStandard Price: MYR 474.15- Days to Ship: 3 Day(s) or more -
Free Mount Type Rotary Actuator, Vane Type, CRBU2 Series
SMC
Can be combined freely with many kinds of unit.
[Features]
· Boasts a 12% weight reduction.
· Multiple mounting variations.
· Works with the compact auto switch D-M9□ type.
· Possible to move the plate mounting position as desired.
· Mounting pitch compatible with existing models.
· Rotation angles of 90°, 180° and 270°; all of the series can rotate up to 270°.Days to Ship: 3 Day(s) or more -
Compact Rotary Actuator, Rack And Pinion Type, CRQ2 Series
SMC
[Features]
· Uses internal cushioning.
· The main body can also serve as a flange.
· With angle adjustment mechanism (each rotation end ±5°).
· 360° rotating angle type.
· Piping can be installed from one end.
· 2 auto switches can be mounted on the same side (mountable on both sides).
· A double piston design free from backlash.
· Shaft type: Supports both single and double shafts.
· Centering is easy when mounting the body.Days to Ship: 3 Day(s) or more -
Rotary Actuator With Angle Adjuster, Vane Type, CRB2□WU Series
SMC
Can be combined freely with many kinds of unit.
[Features]
With angle adjuster.
· Piping port parts are located on the flat section.
· Many variations of shaft-end shape (6 types).
· Works with the compact auto switch D-M9□ type.Days to Ship: 3 Day(s) or more -
Drive equipment oscillation actuator rotary actuator piston type RAT series
KOGANEI
Light weight and compact. High accuracy with bearings. Note: CAD data of this series is being revised. Please wait till the corrections are done.
[Features]
· High accuracy with bearings.
· Easy to use table type with work mounting area.
· The oscillating end can be adjusted by ±5° by adjusting a amount a rubber stopper or shock absorber is screwed in.
· The oscillating degrees and piping can be adjusted from one direction for all models.
· Also, wiring can be pulled in the same direction using a sensor switch on the lead line (except for RAT5).
· Can pipe in 4 directions.
· Easy for piping in small areas and work edges.
· Common 90° specifications and 180° specifications with positioning holes and mounting holes.
· Only the sizes of longitudinal direction are different so it is easy to substitute the 90° specifications with 180°.
· Mounting grooves for the sensor switches are placed on 2 surfaces (RAT5 is on one surface)Standard Price: MYR 1,612.38 Days to Ship: 4 Day(s) or more -
Free Mount Type Rotary Actuator With Angle Adjuster, Vane Type, CRBU2WU Series
SMC
Can be combined freely with many kinds of unit.
[Features]
With angle adjuster.
· · Boasts a 12% weight reduction.
· Multiple mounting variations.
· Works with the compact auto switch D-M9□ type.
· Possible to move the plate mounting position as desired.
· Mounting pitch compatible with existing models.
· Rotation angles of 90°, 180° and 270°; all of the series can rotate up to 270°.Standard Price: MYR 782.58- Days to Ship: 3 Day(s) or more -
Rotary Actuator, Vane Type, CRB1 Series
SMC
[Features]
· Works with the model D-M9□ compact auto switch.
· Highly reliable.
· Supports thrust and radial loads and uses bearings.
· The body can be mounted directly.
· 2 types of port location; side ported or axial ported.Standard Price: MYR 1,479.66- Days to Ship: 21 Day(s) or more -
Basic Rotary Table, Vane Type, MSUB Series
SMC
A rotary actuator with a lightweight and compact table, suitable for robot hands.
[Features]
· Free mount type.
· Can be mounted in 3 directions; axial, lateral, vertical.
· Single vane and double vane types now standard.
· The double vane type has the same dimensions as the single vane type.Days to Ship: 2 Day(s) or more -
Rotary Table, Rack And Pinion Type, CRA1 Series
SMC
[Features]
· The model D-M9□ compact auto switch can be equipped.
· Overall width reduced by up to 14 mm.
· Mountable on 2 surfaces.
· Auto switch can be mounted from the front.
· Weight reduced by up to 14%.
· Mounting compatibility with existing models.
· The cushion seal is replaceable.
· Easy adjustment of the cushion valve.
· The ports, cushion valve and auto switch are all located on the same surface for improved usability.
· Many variations of shaft type.
· Can be mounted in a way that is suitable for the operating conditions/environment.Standard Price: MYR 1,215.65- Days to Ship: 14 Day(s) or more -
Rotary Actuator, Rack and Pinion Type, Clean Series 11-CRA1-Z Series
SMC
[11-Series Clean Series]
・ This product can be used in a clean environment
・ Prevents dust generation in the cleanroomDays to Ship: 27 Day(s) or more -
Table Type Rotary Actuator GRC/GRC-K Series
CKD
Rack and pinion type table shape rotary actuator achieves direct high load mounting and high position accuracy with a bearing guide.
Days to Ship: 15 Day(s) or more -
Rotary Table Rack Pinion Type MSQ Series With External Absorber. Size: 10 to 30·50
SMC
By shortening the effective stroke of the shock absorber, absorption time is shortened, making it possible to improve the takt time.
[Features]
· 4 to 10 times more allowable kinetic energy.
· 2 types of shock absorber are available, for low energy and high energy.
· Reduced overall length.
· There are no protrusions from the adjusting bolts or internal shock absorbers, reducing the longitudinal mounting space.
· The table height is the same for both types (types with adjustment bolts and types with internal shock absorber).Days to Ship: 3 Day(s) or more -
Low Speed Rotary Table, Rack And Pinion Type, MSQX Series
SMC
[Features]
· Possible to transfer workpieces at low speeds.
· Achieves stable motion at 5s/90°.
· Smooth motion without stick-slip phenomenon.
· Rotation time adjustment range: 1 to 5 (s/90°).Standard Price: MYR 1,874.35- Days to Ship: 3 Day(s) or more -
Days to Ship: 20 Day(s) or more -
Drive Equipment Swing Actuator Rotary Actuator Piston Type RAP series
KOGANEI
Compact rectangular body with one surface piping, focused on space efficiency *This series is undergoing revision of CAD data. Please wait till the corrections are done.
Standard Price: MYR 867.80 Days to Ship: 9 Day(s) or more -
3-Position Rotary Table MSZ Series
SMC
SMC Rotary Actuator
[Features]
· 3 stop positions possible
Stop position adjustment range:
From center: ±10°
Rotation range: 0 to 95°
· Handles applications such as sorting workpieces to either left or right
· Can be operated by a single valveStandard Price: MYR 2,634.58- Days to Ship: 9 Day(s) or more -
CRQ2X Series Rack & Pinion Type Compact Low-Speed 90°/180° Rotary Actuator
SMC
Compact, low-speed rotary actuator capable of low-speed transfer of workpieces.
[Features]
· Achieves stable motion at 5 s/90°.
· Smooth motion without sticking or slipping.
· Rotation time adjustment range: 1 to 5 s/90°.
· Standard type: CRQ2 / With auto switch: CDRQ2.
· Size: 10, 15, 20, 30, 40.
· Port types: G1/8, NPT1/8, NPTF1/8, Rc1/8, M5.Days to Ship: 27 Day(s) or more -
Rotary Actuator, Vane Type, Clean and Low Dust Generation 10-/21-CRB1 Series
SMC
[10-Series Clean Series]
・ This product can be used in a clean environment
・ Prevents dust generation in the cleanroom
[21-Series, Copper-Free/ Fluorine-Free/ Silicone Type-Free + Low Dust Generation]
・ This product can be used in environments with restrictions on copper-based, fluorine-based, and silicone-based materials
・ The structure is the same as the Clean Series (Grease and packaging are different from the Clean Series)Standard Price: MYR 2,346.10- Days to Ship: 27 Day(s) or more -
ATEX Directive, Rotary Actuator, Vane Type 55-CRB2 Series, ATEX Category 2
SMC
[What is the ATEX directive?]
Since July 1, 2003, it has been mandatory within the EU to comply with the ATEX Directive for equipment used in potentially explosive atmospheres.
■CE mark and ATEX
The ATEX Directive is now part of the CE mark, which incorporates the conventional European explosion-proof standard.
■Purpose of ATEX Directive
The main purposes of ATEX are:
・ Prevention of static charge
・ Ignition prevention of sparks caused by friction, impact, and wear
・ Ignition prevention due to temperature rise due to the same as above
・ The responsibility lies with the manufacturer
・ Certification by zone/category
■Zone / category division
In ATEX, the objects to be applied are classified into categories according to the category of dangerous places (zone).
・ Zone 0: Category 1
Probability of explosive atmosphere (Zone): Continuous or long time, > 1,000 hours/year
・ Zone 1: Category 2
Probability of explosive atmosphere (Zone): Occasionally, 10 to 1,000 hours/year
・ Zone 2: Category 3
Probability of explosive atmosphere (Zone): Less likely, short time < 10 hours/yearDays to Ship: Quote -
ATEX Directive, Rotary Actuator, Free Mount Type, 56-CRBU2 Series
SMC
[What is the ATEX directive?]
Since July 1, 2003, it has been mandatory within the EU to comply with the ATEX Directive for equipment used in potentially explosive atmospheres.
■CE mark and ATEX
The ATEX Directive is now part of the CE mark, which incorporates the conventional European explosion-proof standard.
■Purpose of ATEX Directive
The main purposes of ATEX are:
・ Prevention of static charge
・ Ignition prevention of sparks caused by friction, impact, and wear
・ Ignition prevention due to temperature rise due to the same as above
・ The responsibility lies with the manufacturer
・ Certification by zone/category
■Zone / category division
In ATEX, the objects to be applied are classified into categories according to the category of dangerous places (zone).
・ Zone 0: Category 1
Probability of explosive atmosphere (Zone): Continuous or long time, > 1,000 hours/year
・ Zone 1: Category 2
Probability of explosive atmosphere (Zone): Occasionally, 10 to 1,000 hours/year
・ Zone 2: Category 3
Probability of explosive atmosphere (Zone): Less likely, short time < 10 hours/yearDays to Ship: Quote -
ATEX Directive, Low Profile Rotary Actuator, Rack and Pinion Type, 55-CRQ2 Series
SMC
[What is the ATEX directive?]
Since July 1, 2003, it has been mandatory within the EU to comply with the ATEX Directive for equipment used in potentially explosive atmospheres.
■CE mark and ATEX
The ATEX Directive is now part of the CE mark, which incorporates the conventional European explosion-proof standard.
■Purpose of ATEX Directive
The main purposes of ATEX are:
・ Prevention of static charge
・ Ignition prevention of sparks caused by friction, impact, and wear
・ Ignition prevention due to temperature rise due to the same as above
・ The responsibility lies with the manufacturer
・ Certification by zone/category
■Zone / category division
In ATEX, the objects to be applied are classified into categories according to the category of dangerous places (zone).
・ Zone 0: Category 1
Probability of explosive atmosphere (Zone): Continuous or long time, > 1,000 hours/year
・ Zone 1: Category 2
Probability of explosive atmosphere (Zone): Occasionally, 10 to 1,000 hours/year
・ Zone 2: Category 3
Probability of explosive atmosphere (Zone): Less likely, short time < 10 hours/yearDays to Ship: Quote -
Rotary actuator, vane type, CRB series
SMC
[Features]
- Achieves a compact design with built-in angle adjustment unit and auto switch unit (sizes 20, 30, 40)
- Overall length reduced by 44%, weight reduced by 48%
- Piping, wiring, and angle adjustment consolidated on the same surface for improved workability
- Easy adjustment of start and end positions with the standard oscillation angle adjustment bolt
· Swing position (shaft surface position) can be checked (only with CDRB auto switch)
· Each unit from the previous product CRB2 series can be mounted on the CRB seriesDays to Ship: Quote -
Rotary actuator, vane type, CRB□-C series
SMC
Each unit from the previous product CRB2 series can be mounted on the CRB series.
[Features]
Main body + vertical auto switch unit (previous product) + variable angle adjustment unit (previous product)Days to Ship: Quote -
Electric Hand Standard Type, Elewave Series
KOGANEI
A compact and lightweight electric hand that supports high-speed operation.
[Features]
・ The manufacturer proposes the compact and lightweight conceptStandard Price: MYR 3,762.09- Days to Ship: 11 Day(s) or more
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Type |
| Main Body Shape |
| Oscillation Angle A |
| Torque(N･m) |
| Operation Method |
| Environment, Applications |
| Rigidity, Accuracy |
| Tube Nominal Dia. |
| Valves |
| Allowable Kinetic Energy(J) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | SMC | SMC | SMC | PARKERKURODA | SMC | SMC | SMC | SMC | SMC | SMC | SMC | KOGANEI | SMC | SMC | SMC | SMC | SMC | CKD | SMC | SMC | CKD | KOGANEI | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | KOGANEI |
| Product Series | Rotary Table, Rack And Pinion Type, MSQ Series (Size 1, 2, 3, 7) | Small High Rotor / Standard Type, PRNA Series (Single Vane / Double Vane) | LER Series Electric Rotary Table, Continuous Rotation Specification | Rotary Table, Rack And Pinion Type, MSQ Series (Size 10 And Up) | Rotary Actuator With Angle Adjuster, Vane Type, CRB2□WU Series | Drive equipment oscillation actuator rotary actuator piston type RAT series | Free Mount Type Rotary Actuator With Angle Adjuster, Vane Type, CRBU2WU Series | Rotary Actuator, Rack and Pinion Type, Clean Series 11-CRA1-Z Series | Rotary Table Rack Pinion Type MSQ Series With External Absorber. Size: 10 to 30·50 | Drive Equipment Swing Actuator Rotary Actuator Piston Type RAP series | CRQ2X Series Rack & Pinion Type Compact Low-Speed 90°/180° Rotary Actuator | Rotary Actuator, Vane Type, Clean and Low Dust Generation 10-/21-CRB1 Series | ATEX Directive, Rotary Actuator, Vane Type 55-CRB2 Series, ATEX Category 2 | ATEX Directive, Rotary Actuator, Free Mount Type, 56-CRBU2 Series | ATEX Directive, Low Profile Rotary Actuator, Rack and Pinion Type, 55-CRQ2 Series | ||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||||
| Days to Ship | 3 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more | 7 Day(s) or more | 14 Day(s) or more | 14 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more | 4 Day(s) or more | 3 Day(s) or more | 21 Day(s) or more | 2 Day(s) or more | 14 Day(s) or more | 27 Day(s) or more | 15 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more | 20 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 27 Day(s) or more | 27 Day(s) or more | Quote | Quote | Quote | Quote | Quote | 11 Day(s) or more |
| Type | Rotary Actuator One Side Shaft Output / Rotary Actuator Both Sides Shaft Outputs | Rotary Actuator One Side Shaft Output | Rotary Table 2-point Stop | Rotary Actuator One Side Shaft Output | Rotary Actuator One Side Shaft Output | Rotary Actuator One Side Shaft Output | Rotary Table 2-point Stop | Rotary Actuator One Side Shaft Output | Rotary Actuator One Side Shaft Output / Rotary Actuator Both Sides Shaft Outputs | Rotary Actuator One Side Shaft Output / Rotary Actuator Both Sides Shaft Outputs | Rotary Actuator One Side Shaft Output / Rotary Actuator Both Sides Shaft Outputs | Rotary Actuator One Side Shaft Output | Rotary Actuator One Side Shaft Output / Rotary Actuator Both Sides Shaft Outputs | Rotary Actuator One Side Shaft Output / Rotary Actuator Both Sides Shaft Outputs | Rotary Actuator One Side Shaft Output | Rotary Actuator One Side Shaft Output / Rotary Actuator Both Sides Shaft Outputs | Rotary Actuator One Side Shaft Output / Rotary Actuator Both Sides Shaft Outputs | Rotary Actuator One Side Shaft Output | Rotary Table 2-point Stop | Rotary Table 2-point Stop | Rotary Actuator Both Sides Shaft Outputs | Rotary Actuator One Side Shaft Output | Rotary Table 3-point or More | Rotary Actuator One Side Shaft Output / Rotary Actuator Both Sides Shaft Outputs | Rotary Actuator Both Sides Shaft Outputs | Rotary Actuator Both Sides Shaft Outputs | Rotary Actuator Both Sides Shaft Outputs | Rotary Actuator One Side Shaft Output | Rotary Actuator One Side Shaft Output | Rotary Actuator Both Sides Shaft Outputs | Rotary Table 3-point or More |
| Main Body Shape | Round Shape | Block Shape | Block Shape | Round Shape | Block Shape | Round Shape | Block Shape | Block Shape | Round Shape Block Mount | Block Shape | Round Shape | Block Shape | Round Shape Block Mount | Round Shape | Round Shape | Block Shape | Block Shape | Block Shape | Block Shape | Block Shape | Block Shape | Block Shape | Block Shape | Block Shape | Round Shape | Round Shape | Round Shape Block Mount | Block Shape | Round Shape | Round Shape | Block Shape |
| Oscillation Angle A | 90° / 100° / 180° / 270° / 40° / 45° / 30° / 60° / 110° / 120° / 135° / 200° / 80° | 90° / 180° / 310° / 320° | 190° | 90° / 180° / 270° | 360° | 90° / 180° | 190° / Arbitrary Setting Type | 90° / 100° / 180° / 190° | 90° / 100° / 180° / 270° / 45° / 110° | 90° / 180° / 360° | 90° / 100° / 180° / 270° | 90° | 90° / 100° / 180° / 270° | 90° / 100° / 180° / 190° / 270° / 280° | 90° / 180° | 90° / 180° | 90° / 180° | 90° / 180° | 90° / 180° | 90° / 180° / 190° | 90° / 180° / 270° | 180° | 190° / Arbitrary Setting Type | 90° / 180° / Arbitrary Setting Type | 90° / 100° / 180° / 270° | 270° | 90° | 90° / 180° | 90° / 180° | 180° | No Setting Angle Specified |
| Torque(N･m) | Less than 1 | Less than 1 | Less than 1 | Less than 1 | Less than 1 | Less than 1 | Less than 1 | Less than 1 | Less than 1 | Less than 1 | Less than 1 | Less than 1 | Less than 1 | Less than 1 | Less than 1 | Less than 1 | Less than 1 | Less than 1 | Less than 1 | Less than 1 | Less than 1 | Less than 1 | Less than 1 | Less than 1 | Less than 1 | Less than 1 | Less than 1 | Less than 1 | Less than 1 | Less than 1 | Less than 1 |
| Operation Method | Single Vane / Double Vane | Others | Single Rack / Double Rack | Single Vane / Double Vane | Others | Single Vane | Double Rack | Single Rack | Single Vane / Double Vane | Single Rack / Double Rack | Single Vane / Double Vane | Double Rack | Single Vane / Double Vane | Single Vane / Double Vane | Single Vane / Double Vane | Single Rack | Single Rack | Double Rack | Single Rack / Double Rack | Single Rack / Double Rack | Double Rack | Single Rack | Double Rack | Single Rack / Double Rack | Single Vane / Double Vane | Single Vane | Single Vane | Double Rack | Single Vane | Single Vane | Single Rack |
| Environment, Applications | Standard | High-Speed | Standard | Standard | High-Speed | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard / Heat Resistant | Cleanroom | Standard / Slow Speed | Standard / Copper-Based / fluoropolymer-Based Material Not Used (Partially Platting Supported) | Slow Speed | Standard / Copper-Based / fluoropolymer-Based Material Not Used (Partially Platting Supported) | Standard | Standard | Slow Speed | Cleanroom | Standard | Standard | Standard | Standard | Standard | Standard |
| Rigidity, Accuracy | Standard | Standard / High Rigidity, High Accuracy | Standard / High Rigidity, High Accuracy | Standard | Standard / High Rigidity, High Accuracy | High Rigidity, High Accuracy | Standard / High Rigidity, High Accuracy | Standard | Standard | Standard | Standard | High Rigidity, High Accuracy | Standard | Standard | Standard | Standard | Standard | Standard | Standard / High Rigidity, High Accuracy | Standard | Standard | Standard | Standard / High Rigidity, High Accuracy | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard |
| Tube Nominal Dia. | 10 ～ 40 | - | 6 ～ Φ12 | - | - | 9 ～ 14 | 15 ～ Φ15 | 6 ～ Φ8 | 10 ～ 40 | 10 ～ 15 | 10 ～ 40 | - | 10 ～ 40 | 50 ～ 80 | 9 ～ 14 | 30 | - | - | 10 ～ 50 | 10 ～ 50 | - | - | - | 10 ～ 30 | - | - | - | - | - | - | - |
| Valves | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A / Provided | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A |
| Allowable Kinetic Energy(J) | Less than 0.005 / 0.01 to Less Than 0.1 | - | Less than 0.005 / 0.005 to Less Than 0.01 | Less than 0.005 / 0.01 to Less Than 0.1 | - | 0.005 to Less Than 0.01 / 0.01 to Less Than 0.1 | 0.005 to Less Than 0.01 / 0.01 to Less Than 0.1 | Less than 0.005 | Less than 0.005 / 0.01 to Less Than 0.1 | Less than 0.005 | Less than 0.005 / 0.01 to Less Than 0.1 | 0.1 to Less Than 1 | Less than 0.005 / 0.01 to Less Than 0.1 | 0.005 to Less Than 0.01 / 0.1 to Less Than 1 | 0.005 to Less Than 0.01 / 0.01 to Less Than 0.1 | 0.01 to Less Than 0.1 / 0.1 to Less Than 1 | 0.01 to Less Than 0.1 / 0.1 to Less Than 1 | - | 0.1 to Less Than 1 / 1 ~ Less than 50 | 0.005 to Less Than 0.01 / 0.01 to Less Than 0.1 | - | 0.005 to Less Than 0.01 | 0.005 to Less Than 0.01 / 0.01 to Less Than 0.1 | Less than 0.005 / 0.01 to Less Than 0.1 | 0.1 to Less Than 1 | Less than 0.005 | Less than 0.005 | - | Less than 0.005 / 0.01 to Less Than 0.1 | Less than 0.005 | 0.01 to Less Than 0.1 |
Loading...
Configure
Specification/Dimensions
-
Type
-
Main Body Shape
-
Oscillation Angle A
-
Torque(N･m)
- Less than 1
- 1 to Less Than 3
- 3 ~ Less than 6
- 6 to Less Than 10
- 10 ~ Less than 20
- 20 to Less Than 50
- 50 to Less Than 100
- 100 ~
There might be logical torque values. Please refer to technical data of each manufacturer for details
-
Operation Method
-
Environment, Applications
- Standard
- Slow Speed
- High-Speed
- Heat Resistant
- Copper-Based / fluoropolymer-Based Material Not Used (Partially Platting Supported)
- Cleanroom
-
Rigidity, Accuracy
-
Tube Nominal Dia.
-
Valves
-
Allowable Kinetic Energy(J)
Narrow search by specifying Manufacturer
-
- SMC (25)
- KOGANEI (3)
- CKD (2)
- PARKERKURODA (1)
- FESTO (0)
- ORIENTAL MOTOR (0)
CAD
-
- 2D
- 3D
Related Categories to Rotary Actuators
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy