(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Lever（Mounting Section, Material：Steel Page2）
[Applications] Clamp, operation
[Clamp Types] Clamp mechanism, cam mechanism, ratchet mechanism
[Materials] Stainless steel, steel, zinc alloy, resin, etc.
| Days to Ship |
|
|---|
-
NABEYA BI-TECH
You can easily fix it to the shaft simply by tightening the screw.
Standard Price: MYR 252.53- Days to Ship: 5 Day(s) or more -
NABEYA BI-TECH
[Features]
· For locations where there is no clear space up or down.
· The handle position can be adjusted freely.
· All stainless steel and steel types standard.
· Large turning radius and clamping force can be obtained with lesser force.Standard Price: MYR 165.54- Days to Ship: 5 Day(s) or more -
NABEYA BI-TECH
Clamping lever using spiral latch. Tightening can be adjusted without any steps of moving up and down of lever.
Standard Price: MYR 835.65- Days to Ship: 5 Day(s) or more -
NABEYA BI-TECH
In combination with a plunger and calculating/positioning lever.
Standard Price: MYR 193.12- Days to Ship: 5 Day(s) or more -
Ergonomic Safety Adjusted Clamping Lever (ESAL)
IMAO
Lever with curves coordinated design. .Even though the lever part is free, when the lever is pushed down, the serrations can be engaged with each other, so it is possible to prevent contact malfunction after tightening.
Standard Price: MYR 46.76- Days to Ship: 8 Day(s) or more -
IMAO
A gentle curve of the arm and polyamide lever handle give a gentle feel to the hands due to the hemispherical finish at the tip.
[Features]
· A gentle curve of the arm and a hemispherical finish of the tip gives a gentle hand grip, enabling a smooth and powerful operation.
· The boss hole can be easily covered with the accessory cap after installation.
· Pilot holes are processed.
· ECL32 to 54 can be used in a snap system by installing the optional ball & spring.
· A groove is provided in the boss for the stop pin that limits the lever operating angle to an angle of 125 ±1°Standard Price: MYR 60.61- Days to Ship: 7 Day(s) or more -
IMAO
By using the optional CLB, you can also use the snap method with this lever handle.
[Features]
· The boss hole can be easily covered with the center plate accessory after installation.
· Optional ball & spring can be installed, and snap method can be used.
· In order to limit the lever operating angle to 125 ±1°,the groove for the snap pin is provided in the boss.
· For grip, PG type is usedStandard Price: MYR 136.88- Days to Ship: 9 Day(s) -
IMAO
[Features]
· Standard type lever handle that can be used widely.
· For grip, PG type is usedStandard Price: MYR 76.20- Days to Ship: 9 Day(s) -
Safety Tension Lever (STF-N, ST-N)
IMAO
Normally, when the lever part is in the free state, pressing the lever pushes the serration into mesh and operation is possible. It is possible to prevent contact malfunction after tightening.
[Features]
· Large clamping force can be reached with lesser force since the thread diameter is thick and the lever is long.
· Besides the door knob, all is made from stainless steel, so it is robust and strong.
· In the push lock type, where the gear is used by pressing the lever, when the hand is released, the built-in spring allows the lever to return to its original position and rotate freely again, and it is safe from any incorrect handlingStandard Price: MYR 187.16- Days to Ship: 7 Day(s) or more -
EALA Ergo Adjuster Clamp Lever (With Hex Socket Head)
IMAO
Lever with curves coordinated design. .Even though the lever part is free, when the lever is pushed down, the serrations can be engaged with each other, so it is possible to prevent contact malfunction after tightening.
[Features]
· Curved design of the entire lever part gives a comfortable grip feeling.
· We accept additional workStandard Price: MYR 46.76- Days to Ship: 5 Day(s) or more -
IMAO
Cam lever for tightening and loosening screws without tools.
[Features]
· 2 types of surface treatment available black oxide coating and electroless nickel plating.
· Handle of stud type cam be adjusted in any direction.
[Applications]
· Ideal for use in screw-tightening and loosening parts where usage is high.Standard Price: MYR 482.56- Days to Ship: 8 Day(s) or more -
IMAO
[Features]
· When the lever is pulled, the serrations mesh and lever handle becomes free.
· The upper part of the boss protrudes, and the lever lifting is easy.Standard Price: MYR 72.15- Days to Ship: 7 Day(s) or more -
IMAO
All SCM made, this ratchet type lever handle appears heavy.
[Features]
· Powerful ratchet lever that works in both forward and reverse directions.
· Demonstrates good strength when working in narrow placesStandard Price: MYR 1,237.68- Days to Ship: 7 Day(s) or more -
KONISHI
[Features]
· Lever used for fixing the position.
· Since the lever becomes free when it is lifted upwards and the serration (gear cutting portion) inside the lever comes off, smooth tightening operation is possible by moving the lever to a position that is always easy to operate.
· Compared to conventional products, it is easy to use and cheap- CAD ：
- 2D
Standard Price: MYR 31.66- Days to Ship: 4 Day(s) or more -
KONISHI
It is a lever used when fixing the positioning. Since the lever becomes free when it is lifted upwards and the serration (gear cutting portion) inside the lever comes off, smooth tightening operation is possible by moving the lever to a position that is always easy to operate.
- CAD ：
- 2D
Standard Price: MYR 31.66- Days to Ship: 4 Day(s) or more -
Clamp Lever Flat, SRFL--6, SFFL--6
KONISHI
[Features]
· Lever used for fixing the position.
· Since the lever becomes free when it is lifted upwards and the serration (gear cutting portion) inside the lever comes off, smooth tightening operation is possible by moving the lever to a position that is always easy to operate.
· Compared to conventional products, it is easy to use and cheap- CAD ：
- 2D
Standard Price: MYR 31.07- Days to Ship: 6 Day(s) or more -
KONISHI
Lever used for fixing the position. Since the lever becomes free when it is lifted upwards and the serration (gear cutting portion) inside the lever comes off, smooth tightening operation is possible by moving the lever to a position that is always easy to operate. Amongst the products with 5 different types of turning radius, select the one that can be used with the appropriate load.
- CAD ：
- 2D
Standard Price: MYR 55.39- Days to Ship: 4 Day(s) or more -
KONISHI
Since the lever becomes free when it is lifted upwards and the serration inside the lever comes off, smooth tightening operation is possible by moving the lever to a position that is always easy to operate. Since the lever part is made from polyamide, the weight of the machine can be reduced.
- CAD ：
- 2D
Standard Price: MYR 26.22- Days to Ship: 5 Day(s) or more -
Safety Plastic Clamping Lever SVR, SVF
KONISHI
Safety lever used for fixing the position. Usually, when the lever is free, if the lever is pushed downward, the serrations (gear cutting portions) on the inside of the lever mesh, and tightening operation is possible. Since the lever part is made from polyamide, the weight of the machine can be reduced.
- CAD ：
- 2D
Standard Price: MYR 62.13 Days to Ship: 5 Day(s) or more -
Push-Off Clamping Lever PCM, PC
KONISHI
It is a lever used when fixing the positioning. By pushing the lever down, the serration (tooth cutting part) inside the lever is released and the lever becomes free, so it is possible to prevent malfunction. Select a product that can be used with an appropriate load from 5 types with different turning radii of the lever.
- CAD ：
- 2D
Standard Price: MYR 45.02- Days to Ship: 6 Day(s) or more -
KONISHI
Lever used for fixing the position. Since the lever becomes free when it is lifted upwards and the serration (gear cutting portion) inside the lever comes off, smooth tightening operation is possible by moving the lever to a position that is always easy to operate.
- CAD ：
- 2D
Standard Price: MYR 172.36- Days to Ship: 4 Day(s) or more -
KONISHI
Lever used for fixing the position. Since the lever becomes free, when it is lifted upwards and the serration (gear cutting portion) inside the lever comes off, smooth tightening operation is possible by moving the lever to a position that is always easy to operate.
- CAD ：
- 2D
Standard Price: MYR 131.16- Days to Ship: 5 Day(s) or more -
KONISHI
Lever used for fixing the position. Snap holes (2 places) and snap grooves (125 ± 1°) can be used on the back of the boss. The center plate of the boss surface appears as a seal, so it is possible to paste the center plate and make it look beautiful after attaching the control lever to the machine.
- CAD ：
- 2D
Standard Price: MYR 91.20- Days to Ship: 5 Day(s) or more -
KONISHI
Add S45C sheet material to obtain shape for obtaining torque power easily. The reamer hole is the standard product at the center of the boss, so select the turning radius accordiing to each useage condition.
- CAD ：
- 2D
Standard Price: MYR 74.98- Days to Ship: 7 Day(s) or more -
KONISHI
Add SUM22 sheet material to obtain shape for obtaining torque power easily. In the center of the boss, there are standard products with 3 types of holes namely; center hole, reamer hole, and tap hole. Select according to use conditions based on the turning radius of 50/75/100.
- CAD ：
- 2D
Standard Price: MYR 49.68- Days to Ship: 6 Day(s) or more -
KONISHI
Ball handle.
[Features]
・ Can be used for opening and closing by lever operation
[Applications]
・ Can be used to rotate the mounting shaft- CAD ：
- 2D
Standard Price: MYR 97.28- Days to Ship: 4 Day(s) or more -
Flat Adjustable Clamp Lever (EFAL)
IMAO
Pulling the lever will disengage the connection between the lever and the serration of the screw part.
Only the lever becomes free, so it can be turned in the desired position.
When the hand is released, the lever is returned and clamped due to the force of the internal spring.
(In case of 18 teeth, each serration is engaged by the calculation formula 360° / 18 = 20° 20°)
[Features]
· Initial tightening work can be done comfortably as the knurling is applied on the lower part of the mail body.
· We accept additional workStandard Price: MYR 39.92- Days to Ship: 7 Day(s) or more -
Standard Price: MYR 90.84- Days to Ship: 5 Day(s) or more -
Standard Price: MYR 90.84- Days to Ship: 5 Day(s) or more -
ESCO
[Features]·ESCO Co., Ltd Female thread clamp lever. ·Mounting part type: Female thread
Standard Price: MYR 87.89 Days to Ship: 9 Day(s) or more
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Application |
| Shape |
| Mounting Section Dia. d (mm) or Nominal Dia. |
| Type, Clamp |
| Mounting Section Type |
| Rotating Radius R(mm) |
| Main Body Material |
| L-Shaped Clamp Lever Shape |
| Mounting Section, Length L(mm) |
| Knobbed Lever Shape |
| Operation Direction |
| Type, Operation |
| Main Body, Surface Treatment |
| Mounting Section, Material |
| Mounting Section, Surface Treatment |
| Knob Material |
| Knob Surface Treatment |
| Gap Adjustment Screw |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | NABEYA BI-TECH | NABEYA BI-TECH | NABEYA BI-TECH | NABEYA BI-TECH | IMAO | IMAO | IMAO | IMAO | IMAO | IMAO | IMAO | IMAO | IMAO | KONISHI | KONISHI | KONISHI | KONISHI | KONISHI | KONISHI | KONISHI | KONISHI | KONISHI | KONISHI | KONISHI | KONISHI | KONISHI | IMAO | ESCO | ESCO | ESCO |
| Product Series | ||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||
| Days to Ship | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 8 Day(s) or more | 7 Day(s) or more | 9 Day(s) | 9 Day(s) | 7 Day(s) or more | 5 Day(s) or more | 8 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 7 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 7 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 9 Day(s) or more |
| Application | Operation | Clamp | Operation | Operation | Clamp | Operation | Operation | Operation | Clamp | Clamp | Clamp | Clamp | Clamp | Clamp | Clamp | Clamp | Clamp | Clamp | Clamp | Clamp | Clamp | Clamp | Clamp | Operation | Operation | Operation | Clamp | - | - | - |
| Shape | Knobbed Shape | Knobbed Shape | Knobbed Shape | Knobbed Shape | L Shape | Knobbed Shape | Knobbed Shape | Knobbed Shape | Knobbed Shape | L Shape | Knobbed Shape | L Shape | L Shape | L Shape | L Shape | L Shape | L Shape | L Shape | L Shape | L Shape | Knobbed Shape | Knobbed Shape | Knobbed Shape | Knobbed Shape | Knobbed Shape | Knobbed Shape | L Shape | - | - | - |
| Mounting Section Dia. d (mm) or Nominal Dia. | 10 ～ 16 | 8 ～ 16 | 10 | 10 | 4 ～ 8 | M6 ～ M14 | 8 ～ 10 | 8 ～ 16 | 10 ～ 16 | M4 ～ M16 | 8 ～ 12 | M6 ～ M12 | 12 ～ M36 | 4 ～ 16 | 4 ～ 10 | 4 ～ 10 | 4 ～ 16 | 4 ～ 12 | 8 | 4 ～ 16 | 8 ～ 20 | 8 ～ 12 | 8 ～ 10 | 8 ～ 16 | 5 ～ 16 | 5 | M5 ～ M12 | M5 ～ M12 | M5 ～ M12 | M5 ～ M6 |
| Type, Clamp | - | Clamp Mechanism | - | - | Clamp Mechanism | - | - | - | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism / Cam Mechanism | Clamp Mechanism | Ratchet Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | - | - | - | Clamp Mechanism | - | - | - |
| Mounting Section Type | Round Bore | Threaded / Tapped | Threaded | Round Bore | Threaded / Tapped | Round Bore | Round Bore | Round Bore | Threaded / Tapped | Threaded / Tapped | Round Bore | Threaded / Tapped | Tapped / Round Bore / Square Bore | Threaded / Tapped | Threaded / Tapped | Threaded / Tapped | Threaded / Tapped | Threaded / Tapped | Tapped | Threaded / Tapped | Threaded / Tapped | Threaded / Tapped | Round Bore | Round Bore | Tapped / Round Bore | Round Bore | Threaded | Threaded | Threaded | Tapped |
| Rotating Radius R(mm) | 123.5 ～ 187.5 | 100 ～ 150 | 109 | 84 ～ 106 | 44 ～ 63 | 67 ～ 140 | 81 ～ 127 | 80 ～ 180 | 87 ～ 128 | 44 ～ 95 | 104 ～ 146 | 40 ～ 95 | 150 ～ 400 | 45 ～ 115 | 45 ～ 85 | 45 ～ 85 | 40 ～ 110 | 42 ～ 80 | 65 | 30 ～ 110 | 65 ～ 130 | 102 ～ 131 | 81 ～ 127 | 90 ～ 180 | 50 ～ 100 | 63 ～ 160 | 30 ～ 78 | - | - | - |
| Main Body Material | Steel | Steel | Steel | Steel | Polyamide | Polyamide | Polyamide | Steel | Steel | Polyamide | Steel | Zinc Alloy | Steel | Zinc Alloy | Zinc Alloy | Zinc Alloy | Zinc Alloy | Polyamide | Polyamide | Zinc Alloy | Steel | Steel | Polyamide | Steel | Steel | Steel | Polyamide | - | - | - |
| L-Shaped Clamp Lever Shape | - | - | - | - | Set Screw Type | - | - | - | - | Set Screw Type | - | Set Screw Type | - | Set Screw Type | Set Screw Type | Set Screw Type | Set Screw Type | Set Screw Type | Set Screw Type | Set Screw Type | No Set Screw Type | No Set Screw Type | No Set Screw Type | No Set Screw Type | No Set Screw Type | No Set Screw Type | Push Button Type | - | - | - |
| Mounting Section, Length L(mm) | 15.5 ～ 19.5 | 18 ～ 60 | 11 | 15 ～ 19 | 16 ～ 30 | - | - | - | 30 ～ 60 | 12 ～ 80 | - | 10 ～ 50 | - | 9 ～ 80 | 9 ～ 80 | 9 ～ 80 | 9 ～ 80 | 9 ～ 50 | 12 | 9 ～ 80 | 10 ～ 63 | 16 ～ 60 | 17 ～ 27 | 13 ～ 26 | 6 ～ 30 | - | 10 ～ 60 | - | - | - |
| Knobbed Lever Shape | Ball Knob | Ball Knob | Ball Knob | Single Lever | - | Single Lever | Single Lever | Single Lever | Ball Knob | - | Ball Knob | - | - | - | - | - | - | - | - | - | Ball Knob | Ball Knob | Single Lever | Single Lever | Ball Knob | Single Lever | - | - | - | - |
| Operation Direction | Horizontal | Horizontal | Horizontal | Horizontal | Horizontal | Horizontal | Horizontal | Horizontal | Horizontal | Horizontal | Vertical | Horizontal | Horizontal | Horizontal | Horizontal | Horizontal | Horizontal | Horizontal | Horizontal | Horizontal | Horizontal | Horizontal | Horizontal | Horizontal | Horizontal | Horizontal | Horizontal | Horizontal | Horizontal | Horizontal |
| Type, Operation | Not Provided | - | Latching Mechanism | Not Provided | - | Not Provided | Not Provided | Not Provided | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Not Provided | Not Provided | Not Provided | - | - | - | - |
| Main Body, Surface Treatment | Black Oxide | Black Oxide | Black Oxide | Black Oxide | None | None | None | Black Oxide | Powder Coating | None | Black Oxide | Coating | Black Oxide | Electrostatic Coating | Electrostatic Coating | Electrostatic Coating | Electrostatic Coating | None | None | Electrostatic Coating | Black Oxide | Black Oxide | None | Black Oxide | Black Oxide | Chrome Plating | None | - | - | - |
| Mounting Section, Material | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel |
| Mounting Section, Surface Treatment | Black Oxide | Black Oxide | Black Oxide | Black Oxide | Zinc Plating | Black Oxide | Black Oxide | Black Oxide | Black Oxide | Black Oxide | Black Oxide | Black Oxide | Black Oxide | Black Oxide | Black Oxide | Black Oxide | Black Oxide | Trivalent Chromate | Trivalent Chromate | Black Oxide | Black Oxide | Black Oxide | Black Oxide | Black Oxide | Black Oxide | Hard Chrome Plating | Zinc Plating | - | - | - |
| Knob Material | Phenol | Phenol | Phenol | Phenol | - | - | Phenol | Phenol | Phenol | - | Phenol | - | - | - | - | - | - | - | - | - | Phenol | Phenol | Phenol | Phenol | Phenol | Steel | Nylon | - | - | - |
| Knob Surface Treatment | None | None | None | None | - | - | None | None | None | - | None | - | - | - | - | - | - | - | - | - | None | None | None | None | None | Chrome Plating | - | - | - | - |
| Gap Adjustment Screw | - | - | - | - | - | - | - | - | - | - | - | - | - | None | None | None | None | None | None | None | None | None | None | None | None | None | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Application
- Clamp
- Operation
- Related Components
-
Shape
-
Mounting Section Dia. d (mm) or Nominal Dia.
-
Type, Clamp
-
Mounting Section Type
- Threaded
- Tapped
- Round Bore
- Square Bore
-
Rotating Radius R(mm)
-
Main Body Material
- Stainless Steel
- Steel
- Zinc Alloy
- Polyamide
- Nylon
- Aluminum
- Others
-
L-Shaped Clamp Lever Shape
-
Mounting Section, Length L(mm)
-
Knobbed Lever Shape
-
Operation Direction
-
Type, Operation
-
Main Body, Surface Treatment
-
Mounting Section, Material
-
Mounting Section, Surface Treatment
-
Knob Material
-
Knob Surface Treatment
-
Gap Adjustment Screw
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
Related Categories to Lever
-
- Catches
- Door Stays
- Telescopic Slide Rails
- Fasteners, Draw Latches
- Latch Handles, Locks, Keys
- Lighting System
- Gas Springs
- Wires, Chains, Metal Fittings, Small Work Pieces
- Parts, Small Work Pieces
- Hanging Tools
- Extrusion Kits and Mesh Fences
- Handle
- Knob Screws
- Lever
- Rotation Handles, Crank Handles
- Hanger Hooks
- Shelves, Shelf Supports, Shelf Poles
- Door Wheels
- Handles
- Hinges
- DIY Supplies
-
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy