(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Adjuster Bolt（Body Material：Steel）
| Days to Ship |
|
|---|
-
- Recommendation
Leveling Mounts Metal Pad Standard
MISUMI
- Economy series Adjuster Flat bottom standard type
- Type: Adjuster Bolt and Flat bottom.
- Part number for series including of C-CNFJN and C-CNFJNS.
- Body Material: Q235 Carbon Steel and SUS304 Stainless steel.
- Surface Treatment: Zinc Plating for Q235 Carbon Steel.
- Nominal of Thread size (M): 10, 12, 16 and 20.
- Thread Length size: 80, 100, 120, 150 and 200 mm.
- Screw is smooth and can be manually for assembly.
- This is an economy series; The price is cheaper than the MISUMI standard product.- Volume Discount
- RoHS
Standard Price: MYR 4.71- Days to Ship: 1 Day(s) or more -
- Recommendation
Leveling Mounts Metal Pad For Heavy Load
MISUMI
- Economy series Adjuster Heavy load type.
- Type: Adjuster Bolt.
- Part number for series including of C-CFJFN and C-CFJFNS.
- Body Material: Q235 Carbon Steel and SUS304 Stainless steel.
- Surface Treatment: Zinc Plating (For Thread and body with Q235 Carbon Steel).
- Nominal of Thread size (M): 8, 10, 12, 16, 20 and 24.
- Thread Length size: 50, 80, 100, 120, 150, 180 and 200 mm.
- This is an economy series; The price is cheaper than the MISUMI standard product.- Volume Discount
- RoHS
Standard Price: MYR 9.86- Days to Ship: 1 Day(s) or more -
MISUMI
- Leveling Mount/Standard type.
- Part number for series including of NFJN, NFJNS and NFJNF type.
- Type of product : Adjusting Bolt.
- Body Material: SS400 Carbon Steel and SUS304 Stainless steel.
- Surface Treatment: Trivalent Chromate (SS400) and Electrolytic Polishing (SUS304)
- Nominal of Thread size (M): 5, 6, 8, 10, 12, 16 and 20.
- Thread Length size: 30, 40, 50, 60, 75, 80, 100, 125, 130, 150, 180, 200, 250 and 300 mm.
- Screw shafts can turn independently of a base and can tilt 3 to 5 degrees.- Volume Discount
Days to Ship: 1 Day(s) or more -
Leveling Mounts For Heavy Load With Anti-Slip Rubber
MISUMI
- Economy series Leveling Mounts for Heavy Load With Anti-Slip Rubber
- Type: Adjusting Bolt with Rubber Foot.
- Part number for series including of C-CFJFNV and C-CFJFNVS.
- Body Material: Q235 Carbon Steel and Stainless steel.
- Surface Treatment: Trivalent Chromate solution for Q235 Carbon Steel.
- Bottom Material: Rubber
- Nominal of Thread size (M): 8, 10, 12, 16, 20 and 24.
- Thread Length size: 50, 80, 100, 120, 150, 180 and 200 mm.
- This is an economy series; The price is cheaper than the MISUMI standard product.- Volume Discount
- RoHS
Standard Price: MYR 11.80- Days to Ship: 1 Day(s) or more -
Leveling Mounts Anti-Vibration
MISUMI
- Economy series Leveling Mounts, Anti-Vibration.
- Type: Adjusting Bolt with Rubber Foot.
- Part number for series including of C-CFJSN and C-CFJSNS.
- Body Material: Q235 Carbon Steel and Stainless steel.
- Body Surface Treatment: Black plating for Q235 Carbon Steel.
- Bottom Pads Part: Rubber.
- Nominal of Thread size (M): 8, 10, 12, 16, 20 and 24.
- Thread Length size: 60, 80, 100, 120, 150, 180 and 200 mm.
- This is an economy series; The price is cheaper than the MISUMI standard product.- Volume Discount
- RoHS
Standard Price: MYR 7.15- Days to Ship: 1 Day(s) or more -
MISUMI
- Leveling Mount/Heavy Load
- Product Type: Adjusting Bolt.
- Part number for series including of FJFN, FJFNS, FJFNB, FJFNF and FJFNH.
- Body Material: SS400 Carbon Steel and SUS304 Stainless steel.
- Surface Treatment: Trivalent Chromate solution for SS400 Steel.
- Nominal of Thread size (M): 10, 12, 16, 20 and 24.
- Thread Length size75, 100, 125, 130, 150 and 180 mm.
- Screw shafts can turn independently of a base and can tilt 3 to 5 degrees.
- The Leveling Mounts: RoHS compliant.- Volume Discount
Days to Ship: 1 Day(s) or more -
Leveling Mounts Bottom Flat With Rubber
MISUMI
- Economy series Leveling Mounts Bottom Flat with Rubber.
- Type: Adjusting Bolt with Rubber Foot.
- The part number is C-CFJGN.
- Body Material: Q235 Carbon Steel.
- Body Surface Treatment: Zinc Plating solution.
- Bottom Pads Part: Rubber.
- Nominal of Thread size (M): 8, 10, 12, 16 and 20.
- Thread Length size: 60, 80, 100, 120, 150 and 200 mm.
- Screw is smooth and can be manually for assembly.
- This is an economy series; The price is cheaper than the MISUMI standard product.- Volume Discount
- RoHS
Standard Price: MYR 5.04- Days to Ship: 1 Day(s) or more -
Leveling Mounts Metal Pad With Positioning Holes
MISUMI
[Features]
·Cost-effective adjuster- Volume Discount
- RoHS
Standard Price: MYR 15.84- Days to Ship: 1 Day(s) or more -
Leveling Mounts PVC Yellow Pad, With 2 Holes
MISUMI
- Economy series Leveling Mounts, PVC Yellow Pad, With 2 Holes.
- Type: Adjusting Bolt with PVC Foot pad.
- The part number is C-CPVCH
- Body Material: Q235 Carbon Steel.
- Body Surface Treatment: Zinc Plating solution.
- Bottom Pads Part: Yellow PVC.
- Nominal of Thread size (M): 12, 16, 20 and 24.
- Thread Length size: 100, 120, 150, 180 and 200 mm.
- This Adjustment Pad type has 2 hole is machined for drive-in.
- PVC yellow pad is harder than ordinary rubber, with excellent load performance.- Volume Discount
- RoHS
Standard Price: MYR 20.38- Days to Ship: 1 Day(s) or more -
MISUMI
- Adjustment Pads/Two Hole Type.
- Part number for series including of FJWN and FJWNS.
- Body Material: SS400 steel and stainless steel SUS304.
- Surface Treatment: Trivalent Chromate solution and Electrolytic Polishing.
- Nominal of Thread size (M): 10, 12, 16 and 20.
- Thread Length size: 75, 100, 125, 130, 150 and 180 mm.
- This series designed two holes are machined for drive-in anchors.
- Screw shaft turns independently of the base and tilts slightly.
- For Adjustment Pads type: RoHS compliant.- Volume Discount
Standard Price: MYR 31.52- Days to Ship: 4 Day(s) or more -
MISUMI
- Adjuster Feet/Resin Rubber Type
- Product type: Adjusting Bolt.
- Part number for series including of LEMNS(Steel) and LEMNT (Stainless steel).
- Body, Thread, and nut Material: S45C steel and stainless steel SUS304.
- Body, Thread and Surface Treatment: Trivalent Chromate solution for S45C steel.
- Nominal of Thread size (M): 10, 12 and 16.
- Thread Length size: 75, 100 and 130 mm.
- Tiltable in all 360° directions.
- The screw shaft is tilted to allow use on angled floor surfaces.- Volume Discount
Standard Price: MYR 52.32- Days to Ship: 4 Day(s) or more -
MISUMI
- Leveling Mount Non- Slip Type
- Part number for series including of is FJGN, FJGM, FJGNS and FJGMS.
- Body Material: SS400 Steel and SUS304 Stainless steel.
- Body Surface Treatment: Trivalent Chromate and Electrolytic Polishing.
- Rubber Material: Elastomer, Neoprene, Non-Migration Chloroprene Rubber, Electrically Conductive Rubber, PVC (Dark Blue).
- Nominal of Thread size (M): 8, 10, 12, 16 and 20.
- Thread Length size: 50, 75, 100, 125, 130, 150 and 180 mm.
- Screw shaft turns independently of the base and tilts slightly.- Volume Discount
Standard Price: MYR 11.38- Days to Ship: 1 Day(s) or more -
MISUMI
- Adjustment Pads/Fixed Type
- Product type: Adjusting Bolt.
- Part number for series including of FJKN (Steel) and FJKNS (Stainless steel).
- Body Material: SS400 steel and stainless steel SUS304.
- Surface Treatment: Trivalent Chromate solution for SS400 steel.
- Nominal of Thread size (M): 10, 12, 16 and 20.
- Thread Length size: 75, 100, 125, 130 150 and 180 mm.
- Screw shaft turns independently of the base and tilts slightly.
- This Adjustment Pad type has one hole is machined for drive-in.- Volume Discount
Standard Price: MYR 16.51- Days to Ship: 1 Day(s) or more -
MISUMI
- Rubber Base Leveling Mounts
- Part number for series including of is FJSN, FJSM, FJSNS and FJSMS.
- Main body Material: SS400 Steel and SUS304 Stainless steel.
- Main body Surface Treatment: Electrodeposited Paint (Black), Electrolytic Polishing.
- Rubber Material: Neoprene, Silicon, Polyacetal, Non-Migration Chloroprene Rubber and Electrically Conductive Rubber
- Nominal of Thread size (M): 8, 10, 12, 16 and 20.
- Thread Length size: 50, 60, 70, 75, 100 and 130 mm.
- Rubber type is not selectable for FJSNS and FJSN (Neoprene rubber only).- Volume Discount
Standard Price: MYR 15.43- Days to Ship: 1 Day(s) or more -
Leveling Mounts PVC Yellow Pad
MISUMI
- Economy series Leveling Mounts with Yellow PVC Foot pad type.
- Type: Adjusting Bolt with PVC Foot pad.
- The part number is C-CPVC.
- Body Material: Q235 Carbon Steel.
- Body Surface Treatment: Zinc Plating solution.
- Bottom Pads Part material: Yellow PVC.
- Nominal of Thread size (M): 8, 10, 12, 16, 20 and 24.
- Thread Length size: 50, 80, 100, 120, 150, 180 and 200 mm.
- PVC yellow pad is harder than ordinary rubber, with excellent load performance.- Volume Discount
- RoHS
Standard Price: MYR 10.69- Days to Ship: 1 Day(s) or more -
Leveling Mounts Unti-Slip Rubber Pad, Universal Type
MISUMI
[Features]
·Cost-effective adjuster- Volume Discount
- RoHS
Standard Price: MYR 42.00- Days to Ship: 1 Day(s) or more -
Adjuster Bolts (1200 - 4500 kg type)
TRUSCO NAKAYAMA
· The pedestal part is made by cold forging, which provides it with strength and enables it to withstand heavy loads.
· Machine tools, vending machines, conveyors, work benches, computer racks, control panels, and scientific instruments.Standard Price: MYR 46.16- Days to Ship: 8 Day(s) -
Adjuster Bolt (500 and 600 kg Types)
TRUSCO NAKAYAMA
· The most standard adjuster bolt suitable for various applications thanks to its high allowable load.
· Machine tools, vending machines, conveyors, work benches, computer racks, control panels, and scientific instruments.Standard Price: MYR 33.83- Days to Ship: 8 Day(s) -
Adjuster Bolt (500 and 600 Kg Type) (with Resin Cover)
TRUSCO NAKAYAMA
· A resin cover is attached to the pedestal portion and prevents the damaging of floors.
· Machine tools, vending machines, conveyors, work benches, computer racks, control panels, and scientific instruments.Standard Price: MYR 41.01- Days to Ship: 5 Day(s) or more -
DAIWARASHI
An adjuster for light vibration-proofing equipped with rubber on the back side of the adjuster base. Note: Please be advised that the model number in VONA has been changed from "D-A III" to "D-A3."
[Features]
· Since the rubber part comes in contact with the floor, floor damage is prevented.
· A light vibration-proof type adjustment bolt.
· However, since the rubber hardness is 80°, repulsion is higher than low elasticity rubber and does not demonstrate much of a vibration-proofing effect. For this reason, please compare with other vibration-proof types such as the D-G series when using.
· Can easily be mounted using a screwdriver since a Phillips head slot has been provided on the bottom of the bolt.
· A nylon washer is used between the receiver and bolt, and rotation is smooth.
· The FR type uses non-migratory rubber so traces of rubber do not remain when moving the machinery.
· The SI type is white and is characterized by hardly leaving traces of rubber.
· Suitable for office equipment, etc.- CAD ：
- 2D
Standard Price: MYR 25.56- Days to Ship: 4 Day(s) or more -
Adjuster for Heavy Weights D-C/D-C, S
DAIWARASHI
A standard type adjuster for heavy loads
[Features]
· The receiver is a forged item.
· Since it is a mold release surface that has undergone hot forging, unevenness does not stand out, unlike mold casting.
· D-C-S has a luxurious feel since the surface of the receiver is grind-processed with a lathe.
· Since the receiver is forged, it features a load resistance of 10 tons or more. However, since the screw is buckled first, load resistance depends on the screw diameter.- CAD ：
- 2D
Standard Price: MYR 30.23- Days to Ship: 4 Day(s) or more -
Adjuster Feet/Resin Rubber Type
MISUMI
- Adjuster Feet/Resin Rubber Type
- Part number for series including of AJPD, AJPDS, AJPDR and AJPDSR.
- Body Material: SS400 steel and stainless steel SUS304.
- Surface Treatment: Trivalent Chromate solution for SS400 steel.
- Bottom Material: Reinforced Polyacetal for Pad Bottom and NBR for Rubber Pad.
- Nominal of Thread size (M): 10, 12, 16 and 20.
- Thread Length size: 60, 70, 80, 100, 130, 150 and 180 mm.
- Tiltable in all 360° directions.
- Use of the Rubber Pad Type in full ground contact will be less slippery.- Volume Discount
Standard Price: MYR 56.98- Days to Ship: 4 Day(s) or more -
Foot Jack FJK Model (Fixed Type)
NABEYA
Can be fixed with an anchor bolt.
[Features]
· A hex nut is press-fitted to the bottom of the base to enable quick assembly with an impact wrench, etc.
· Can be fixed using an anchor boltStandard Price: MYR 44.03- Days to Ship: 4 Day(s) or more -
TAKIGEN
The rubber on the bottom portion is flame-retardant and non-migratory. Installation is easy since there is a Phillips head slot has been provided on the back of the screw part.
Standard Price: MYR 17.33- Days to Ship: 1 Day(s) or more -
TRUSCO NAKAYAMA
· A light load type of the most general adjuster.
· Machine tools, vending machines, conveyors, work benches, computer racks, control panels, and scientific instruments.Standard Price: MYR 30.80- Days to Ship: 8 Day(s) -
NABEYA BI-TECH
[Features]
· A leveling foot in which the screw and pad are made of steel.
· FDM: male thread and FDF: female thread.
· The pad can be tilted up to 15°.
· Effective for use on slopes.
· There are products that include a Delrin* cap (FDM-KS/EDE-KS) and products that include a Santoprene** cap (FDM-KR/FDF-KR).
· Material and finish: Screw/pad: SUS22L, trivalent chromate finish.
· Lock nut: S45C, trivalent chromate finishStandard Price: MYR 81.87- Days to Ship: 5 Day(s) or more -
NABEYA
A vibration-proof foot jack that in which a high performance foamed polyurethane pad is used. Higher performance than rubber pads.
[Features]
· A foot jack with a leveling mechanism and vibration-proofing function.
· Higher performance than rubber pad products.
· Features superior solution resistance and will not transfer onto floors.
· Since the bolt connection is flexible, it can absorb the sloping of the floor.
· Three types of pads are available to satisfy conditions for vibration frequency, machine type, and weight.Standard Price: MYR 44.37- Days to Ship: 4 Day(s) or more -
TAKIGEN
A low cost type in which the shaft part and bottom part are integrated.
Standard Price: MYR 15.05- Days to Ship: 5 Day(s) or more -
Standard Price: MYR 46.75- Days to Ship: 4 Day(s) or more -
Tabletop Leveling Mounts/Grip Type
MISUMI
- Tabletop Leveling Mounts/Grip Type
- Product type: Mounting.
- The part number is NFBG.
- Main Body Material: Polyacetal plastic.
- Bottom Material: Elastomer rubber.
- Thread Material is SWCH steel.
- Thread Surface Treatment: Trivalent Chromate solution.
- Nominal of Thread size (M): 6, 8 and 10 (Coarse).
- Grip Body Color: Black and white.
- Screw shafts can turn independently of a base and can tilt 3 to 5 degrees.
- The product with a leveling function. Less slippery than the existing products.- Volume Discount
Standard Price: MYR 16.44- Days to Ship: 1 Day(s) or more -
MISUMI
[Features]
·Cost-effective adjuster- Volume Discount
- RoHS
Standard Price: MYR 17.56- Days to Ship: 1 Day(s) or more -
NABEYA
Ideal for the leveling of equipment, etc. Three types are available: S45C, resin pad, and SUS.
Standard Price: MYR 60.18- Days to Ship: 4 Day(s) or more -
Adjuster with Rubber for Heavy Weights (Bearings Mounted), D-H-R
DAIWARASHI
An adjuster equipped with rubber for medium loads featuring a built-in thrust bearing.
[Features]
· Since the receiver features a chloroprene rubber coating, there is no need to worry about it falling off, enabling it to be used with confidence.
· Groove processing is applied to the rear surface of the rubber to make it non-slippery.
· Effectively protects floors.- CAD ：
- 2D
Standard Price: MYR 252.24- Days to Ship: 2 Day(s) or more -
Standard Receiver Type Adjuster D-A/D-B
DAIWARASHI
The most general standard type adjuster
[Features]
· The screw shaft rotates and tilts somewhat.
· A standard type that can be used as the adjustment bolt for any machinery.
· The affordable standard receiver type is recommended when using in large numbers, such as for the legs of a conveyor.
· D-A supports screw diameters M16 and M20, and D-B supports screw diameter M12.- CAD ：
- 2D
Standard Price: MYR 18.16- Days to Ship: 4 Day(s) or more -
Adjuster Feet/Tapped Socket Type
MISUMI
- Adjuster Feet/Tapped Socket Type.
- Part number for series including of LEMN, LEMS and LEMT type.
- Type of product : Adjusting Bolt.
- Body Material: Nylon Plastic, Carbon Steel and SUS303 Stainless steel.
- Socket Material: SUM24, SUM23 and SUS303.
- Socket Surface Treatment: Trivalent Chromate and electroless Nickel Plating.
- Nominal of Thread size (M): 6, 8, 10, 12 and 16.
- Thread Length size: 40, 50, 63, 80, 100 and 125 mm.
- This product can be used as a strike plate to fix the adjustment bolt.- Volume Discount
Standard Price: MYR 96.98 Days to Ship: 4 Day(s) or more -
NANSIN
An adjuster for medium to high loads.
[Features]
· A bolt optimized for operating environment and material quality lineup.
[Applications]
· For fixing products such as plant machinery or ATM.
· Longer lifespan of caster.Standard Price: MYR 28.89- Days to Ship: 5 Day(s) or more -
Adjuster for Heavy Weight, With Rubber D-C-R
DAIWARASHI
A rubber equipped type adjuster for medium loads
[Features]
· Receiver features a chloroprene rubber coating.- CAD ：
- 2D
Standard Price: MYR 42.63- Days to Ship: 4 Day(s) or more -
Adjuster Pad - Rotary Type, Nylon Pad Bottom
MISUMI
[Features]·The screw shaft is tilted to allow use on angled floor surfaces.
- Volume Discount
Standard Price: MYR 37.58- Days to Ship: 4 Day(s) or more -
Foot Jack FJB Type (Rubber Base Type)
NABEYA
A rubber base foot jack. Features a slipping prevention effect and light vibration-proofing properties.
[Features]
· A Phillips head slot has been provided on the bottom of the base and assembly can be done quickly with an impact wrench, etc.
· A nylon washer is built in to the base upper surface enabling operations to be performed smoothly.
· The bottom part rubber features liquid resistance (gasoline, kerosene, acids, alkaline substances) and can be used from -20°C to 120°C.
· The bottom part rubber features a slipping prevention effect, cushioning properties, and light vibration-proofing properties.Standard Price: MYR 27.14- Days to Ship: 2 Day(s) or more -
Foot Jack FJR Type (With Rubber)
NABEYA
Since it includes rubber, floors are not damaged and slipping is prevented.
[Features]
· Since it includes rubber, floors are not damaged and slipping is prevented.
· A hex nut is press-fitted to the bottom of the base to enable quick assembly with an impact wrench, etc.
· The rubber has liquid resistance (gasoline, kerosene, acid, alkali) and can be used from -22°C to 100°C.Standard Price: MYR 28.12- Days to Ship: 4 Day(s) or more -
Standard Price: MYR 90.02- Days to Ship: 4 Day(s) or more -
RICHENGINEERING
Standard adjuster pad with high versatility.
It is recommended when you want to stabilize firmly!
[Features]
·Lineup of 2 types of screw nominals, M8 and M12
·Bottom material is rubber
·The swing angle of the main body supports up to 10 degrees.
[Applications]
·When you want to stabilize devices and jigs by preventing them from slipping or shaking.Standard Price: MYR 56.45 Days to Ship: 10 Day(s) or more -
Leveling Mounts Metal Body, Universal Type
MISUMI
[Features]
·Cost-effective adjuster- Volume Discount
- RoHS
Standard Price: MYR 51.16- Days to Ship: 6 Day(s) or more -
Foot Jack FJ Type (Standard Type)
NABEYA
The most general foot jack. Can be used for various industrial equipment.
[Features]
· A hex nut is press-fitted into the base bottom part and the FJ-S type can be quickly assembled with an impact wrench, etc.
· A Phillips head slot has been provided on the base bottom of the FJ type and assembly can be performed using a screwdriver, etc.Standard Price: MYR 18.40- Days to Ship: 2 Day(s) or more -
Adjuster for Anchor Fixing D-EII/D-EII-ST
DAIWARASHI
A standard item adjuster bolt for anchor fixing. Note: Please be advised that the model number in VONA has been changed from "D-E II" to "D-E2."
[Features]
· Similar to D-A, it is structured so that fixing of the receiver and bolt is performed by placing the bolt protrusion into the receiver and pressing a nut into it.
· Can easily be fixed using an anchor bolt.
· Please use an anchor bolt.
· Please use a 12 mm anchor bolt.
· Bolts shorter than 12 × 70 are not recommended for complete fixing due to safety concerns.
· Note: The screw rotates and tilts somewhat.- CAD ：
- 2D
Standard Price: MYR 33.74- Days to Ship: 4 Day(s) or more
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Specifications |
| Thread Length L1(mm) |
| Nominal of Thread M(mm) |
| Type |
| Main Body Height E(mm) |
| Adjusting Bolt Shape Type |
| Body Material |
| Properties |
| Bottom Rubber Material |
| Mounting Shape Type |
| Thread Material |
| Main Body Surface Treatment |
| Swivel Angle θ(deg) |
| Height Adjusting Handle |
| Thread Surface Treatment |
| Swivel Mechanism |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | DAIWARASHI | DAIWARASHI | MISUMI | NABEYA | TAKIGEN | TRUSCO NAKAYAMA | NABEYA BI-TECH | NABEYA | TAKIGEN | MISUMI | MISUMI | MISUMI | NABEYA | DAIWARASHI | DAIWARASHI | MISUMI | NANSIN | DAIWARASHI | MISUMI | NABEYA | NABEYA | GIFUSANKENKOGYO | RICHENGINEERING | MISUMI | NABEYA | DAIWARASHI |
| Product Series | Adjuster with Rubber for Heavy Weights (Bearings Mounted), D-H-R | ||||||||||||||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||||
| Days to Ship | 1 Day(s) or more | 1 Day(s) or more | 1 Day(s) or more | 1 Day(s) or more | 1 Day(s) or more | 1 Day(s) or more | 1 Day(s) or more | 1 Day(s) or more | 1 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 1 Day(s) or more | 1 Day(s) or more | 1 Day(s) or more | 1 Day(s) or more | 1 Day(s) or more | 8 Day(s) | 8 Day(s) | 5 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 1 Day(s) or more | 8 Day(s) | 5 Day(s) or more | 4 Day(s) or more | 5 Day(s) or more | 4 Day(s) or more | 1 Day(s) or more | 1 Day(s) or more | 4 Day(s) or more | 2 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 5 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 2 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 10 Day(s) or more | 6 Day(s) or more | 2 Day(s) or more | 4 Day(s) or more |
| Specifications |
|
|
|
|
|
|
|
|
|
|
| ||||||||||||||||||||||||||||||||||
| Thread Length L1(mm) | 80 ～ 200 | 50 ～ 200 | 30 ～ 250 | 50 ～ 200 | 60 ～ 200 | 75 ～ 300 | 60 ～ 200 | 50 ～ 150 | 100 ～ 200 | 75 ～ 180 | 75 ～ 100 | 50 ～ 180 | 75 ～ 150 | 50 ～ 130 | 50 ～ 200 | 100 ～ 200 | 124 ～ 209 | 122 ～ 212 | 124 ～ 215.5 | 50 ～ 200 | 50 ～ 180 | 70 ～ 100 | 50 ～ 180 | 50 ～ 130 | 11.6 ～ 117.5 | 40 ～ 125 | 60 ～ 100 | 75 ～ 150 | 20 ～ 100 | 25 ～ 32 | 50 ～ 150 | - | 150 ～ 200 | 65 ～ 180 | - | 50 ～ 170 | 75 ～ 200 | 70 ～ 100 | 50 ～ 130 | 50 ～ 180 | 38 ～ 45 | 35 | 100 ～ 180 | 50 ～ 200 | 75 ～ 200 |
| Nominal of Thread M(mm) | 10 ～ 20 | 8 ～ 24 | 5 ～ 20 | 8 ～ 24 | 8 ～ 24 | 10 ～ 24 | 8 ～ 20 | 12 ～ 20 | 12 ～ 24 | 10 ～ 20 | 10 ～ 12 | 8 ～ 20 | 12 ～ 20 | 8 ～ 20 | 8 ～ 24 | 12 ～ 24 | 12 ～ 20 | 12 ～ 20 | 12 ～ 20 | 8 ～ 20 | 12 ～ 20 | 12 | 12 ～ 16 | 8 ～ 20 | 8 ～ 10 | 8 ～ 16 | 8 ～ 20 | 16 | 8 ～ 12 | 6 ～ 10 | 12 ～ 16 | 10 ～ 20 | 24 ～ 30 | 12 ～ 20 | 10 | 8 ～ 20 | 12 ～ 20 | 10 ～ 12 | 8 ～ 20 | 8 ～ 16 | 16 | 8 | 16 ～ 24 | 8 ～ 20 | 12 ～ 20 |
| Type | Adjusting Bolt | Adjusting Bolt | - | Adjusting Bolt | Adjusting Bolt | - | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | - | - | - | - | - | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | - | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Mounting | Adjusting Bolt | Others | Adjusting Bolt | Adjusting Bolt | - | Adjusting Bolt | Adjusting Bolt | - | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt |
| Main Body Height E(mm) | 98.5 ～ 233.5 | 74.5 ～ 236.5 | 18 | 82.5 ～ 245 | 81.5 ～ 234 | 18 | 80 ～ 236.5 | - | 137 ～ 245 | - | - | - | 18 | - | 82.5 ～ 245.5 | - | - | - | - | 13 ～ 17 | 17 | - | 17 | 12 ～ 25 | - | 4 ～ 8.5 | 15.5 ～ 17.5 | 6 | 17.7 ～ 23 | 16.5 | - | 5 ～ 9 | 37 ～ 42 | 15 ～ 18 | 22 | 20 ～ 25 | 22 | 18 | 13.5 ～ 17 | 12 ～ 23 | 63 ～ 72 | 60 | - | 10.5 ～ 20 | 17 ～ 19 |
| Adjusting Bolt Shape Type | Standard | Standard | Standard | Rubber Foot Type | Rubber Foot Type | - | Rubber Foot Type | Standard | Standard | Rubber Foot & Anchor Bolt Fixing Type | Standard | Rubber Foot Type | Anchor Bolt Mounting Type | Rubber Foot Type | Standard | Rubber Foot Type | Standard | Standard | Rubber Foot Type | Rubber Foot Type | Standard | - | Standard | Rubber Foot Type | Standard | Standard | Rubber Foot Type | Standard | Standard | - | Standard | Standard | Built-in Bearing Type | Standard | Tapped Socket Type | Rubber Foot Type | Rubber Foot Type | - | Rubber Foot Type | Rubber Foot Type | Rubber Foot Type | Rubber Foot Type | Standard | Standard | Rubber Foot & Anchor Bolt Fixing Type |
| Body Material | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel |
| Properties | Standard | Standard | Standard | Standard | Standard | Standard | Standard | - | Standard | Standard | Standard | Standard / Electrical Conductivity | Standard | Standard | Standard | - | Standard | Standard | Standard | Vibration Control | Standard | Standard | Standard | Standard | Standard | Standard | Oil Resistance / Chemical Resistance / Vibration Control | Standard / Oil Resistance | Standard | Standard | - | - | Standard | Standard | Standard | Standard | Standard | Standard | Oil Resistance / Chemical Resistance / Heat Resistance / Vibration Control / Impact Resistance | Standard / Oil Resistance / Chemical Resistance / Heat Resistance | Standard | Standard | - | Standard | Standard / Vibration Control |
| Bottom Rubber Material | - | - | - | Synthetic Rubber | - | - | Synthetic Rubber | - | Polyvinyl Chloride | - | - | Chloroprene Rubber / Elastomer / Neoprene Rubber / Others / Synthetic Rubber | - | Chloroprene Rubber / Polyacetal / Silicon / Neoprene Rubber / Synthetic Rubber | Polyvinyl Chloride | - | - | - | Others | Chloroprene Rubber / Ethylene Propylene Rubber / Silicon | - | - | - | Ethylene Propylene Rubber | - | - | Elastomer | - | - | - | - | - | Chloroprene Rubber | - | - | Synthetic Rubber | Chloroprene Rubber | - | Neoprene Rubber | - | - | - | - | - | - |
| Mounting Shape Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Rubber Mount Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Rubber Mount Type | - | - | - | - |
| Thread Material | Steel | Steel | Stainless Steel / Steel | Steel | Steel | Stainless Steel / Steel | Steel | Steel | Steel | Stainless Steel / Steel | Steel | Stainless Steel / Steel | Stainless Steel / Steel | Stainless Steel / Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Stainless Steel / Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Stainless Steel | Steel | Steel | Steel | Steel | Steel | Steel | - | Steel | Steel | Steel |
| Main Body Surface Treatment | Zinc Plating | Zinc Plating | Electrolytic Polishing / Trivalent Chromate | Chrome Plating | Black Plating | Not Provided / Trivalent Chromate | Zinc Plating | Zinc Plating | Chrome Plating | Electrolytic Polishing / Trivalent Chromate | Trivalent Chromate | Electrolytic Polishing / Trivalent Chromate | Electrolytic Polishing / Trivalent Chromate | Electrolytic Polishing / Paint | Chrome Plating | Chrome Plating | - | - | - | Paint | Trivalent Chromate | Not Provided | Bright Chromate Plating | Zinc Plating | - | Trivalent Chromate | Paint | Zinc Plating | Trivalent Chromate | - | Zinc Plating / Paint | Black Oxide | Trivalent Chromate | Trivalent Chromate | Not Provided | - | Trivalent Chromate | - | Zinc Plating | Bright Chromate Plating | Bright Chromate Plating | Electroless Nickel Plating | Zinc Plating | Bright Chromate Plating | Trivalent Chromate |
| Swivel Angle θ(deg) | - | - | - | - | - | - | - | - | - | - | 15 | - | - | - | - | 15° | - | - | - | - | - | 15 | - | - | - | 30 | - | - | 14 | - | - | 20 | - | - | 7.5 | - | - | 15 | - | - | - | 10 | 15° | - | - |
| Height Adjusting Handle | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | - | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | - | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | - | - | Not Provided | Not Provided | Not Provided | Not Provided | - | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | - | Not Provided | Not Provided |
| Thread Surface Treatment | Zinc Plating | Zinc Plating | Electrolytic Polishing / Trivalent Chromate | Zinc Plating | Zinc Plating | Not Provided / Trivalent Chromate | Zinc Plating | Zinc Plating | Zinc Plating | Electrolytic Polishing / Trivalent Chromate | Trivalent Chromate | Electrolytic Polishing / Trivalent Chromate | Electrolytic Polishing / Trivalent Chromate | Electrolytic Polishing / Electrostatic Paint | Zinc Plating | Zinc Plating | - | - | - | Electrostatic Paint | Trivalent Chromate | Not Provided / Trivalent Chromate | Bright Chromate Plating | Zinc Plating | - | Trivalent Chromate | Electrostatic Paint | Zinc Plating | Trivalent Chromate | Trivalent Chromate | Zinc Plating / Electrostatic Paint | Black Oxide | Trivalent Chromate | Trivalent Chromate | Not Provided | - | Trivalent Chromate | Trivalent Chromate | Zinc Plating | Bright Chromate Plating | Bright Chromate Plating | - | Zinc Plating | Bright Chromate Plating | Trivalent Chromate |
| Swivel Mechanism | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Provided | Not Provided | Not Provided | Not Provided | Not Provided | Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Provided | Not Provided | Not Provided | Not Provided | Provided | Not Provided | Not Provided | Provided | - | Not Provided | Provided | Not Provided | Not Provided | Provided | - | Not Provided | Provided | Not Provided | Not Provided | Not Provided | Provided | Provided | Not Provided | Not Provided |
Loading...
Configure
Specification/Dimensions
-
Thread Length L1(mm)
- 9
- 11.5
- 11.6
- 14
- 16
- 17
- 17.5
- 18
- 19
- 19.5
- 20
- 21
- 21.5
- 22
- 23
- 24
- 25
- 25.5
- 26
- 26.5
- 27
- 27.5
- 28
- 28.5
- 29
- 29.5
- 30
- 31
- 31.5
- 32
- 33
- 34
- 35
- 36
- 36.5
- 38
- 39.5
- 40
- 41
- 42
- 43
- 45
- 49.5
- 50
- 51
- 51.5
- 52
- 52.5
- 53
- 54
- 56
- 58
- 59.5
- 60
- 61
- 62
- 63
- 65
- 66
- 67.5
- 68
- 69.5
- 70
- 71
- 71.5
- 72
- 73
- 75
- 78
- 80
- 85
- 90
- 91
- 95
- 98
- 99.5
- 100
- 101.5
- 108
- 110
- 114
- 117.5
- 120
- 122
- 124
- 125
- 126
- 127
- 129
- 130
- 132
- 132.5
- 135.5
- 136
- 138
- 142
- 144
- 145
- 148
- 150
- 154
- 155
- 156
- 157
- 158
- 159
- 160
- 162
- 162.5
- 165.5
- 168
- 170
- 172
- 174
- 175
- 176
- 177
- 179
- 180
- 182
- 182.5
- 184
- 185.5
- 186
- 198
- 200
- 206
- 207
- 209
- 210
- 212
- 212.5
- 215.5
- 220
- 250
- 280
- 300
[80-300/10mm Unit(s)]
-
Nominal of Thread M(mm)
-
Type
- Adjusting Bolt
- Mounting
- Precision Instrument
- Others
- Adjusting Screw with Rubber Grommet
-
Main Body Height E(mm)
- 4
- 5
- 6
- 7
- 8
- 8.5
- 9
- 9.5
- 9.8
- 10
- 10.5
- 11
- 11.5
- 12
- 12.5
- 13
- 13.5
- 14
- 14.5
- 15
- 15.5
- 16
- 16.5
- 17
- 17.5
- 17.7
- 18
- 18.5
- 19
- 20
- 20.5
- 20.7
- 21
- 22
- 23
- 23.5
- 24
- 24.5
- 25
- 26
- 27
- 27.5
- 28
- 28.2
- 29
- 29.5
- 30
- 30.5
- 31
- 31.5
- 32
- 32.5
- 33
- 33.2
- 34
- 34.5
- 35
- 35.4
- 35.5
- 36
- 36.5
- 37
- 37.5
- 39
- 40
- 41
- 42
- 42.5
- 43
- 44
- 44.5
- 45
- 46
- 46.5
- 47
- 48.5
- 50
- 51
- 52
- 53
- 54
- 55
- 55.5
- 56
- 57
- 58
- 60
- 61
- 62
- 62.5
- 63
- 64
- 64.5
- 65
- 66
- 67
- 67.5
- 69
- 70
- 72
- 73
- 74.5
- 75
- 76
- 77
- 77.5
- 78.5
- 79
- 80
- 81
- 81.5
- 82.5
- 83
- 84.5
- 85
- 90
- 91
- 92
- 93
- 95
- 97
- 98.5
- 100
- 101
- 101.5
- 103
- 104
- 104.5
- 105
- 106
- 107
- 108
- 108.5
- 110
- 112
- 112.5
- 114.5
- 115
- 116
- 117
- 117.5
- 118.5
- 119
- 121.5
- 123
- 124
- 125
- 126
- 127
- 128
- 128.5
- 130
- 131
- 132
- 132.5
- 134
- 135
- 136
- 137
- 138
- 139
- 139.5
- 140
- 143
- 145
- 147
- 148
- 150
- 150.5
- 151
- 152
- 152.5
- 153
- 153.5
- 154
- 156
- 156.5
- 157
- 158
- 158.5
- 159
- 159.5
- 160
- 160.5
- 161
- 161.5
- 162
- 163
- 166.5
- 170
- 173
- 175
- 176
- 177
- 178
- 180
- 180.5
- 181
- 182.5
- 183
- 183.5
- 184
- 186
- 186.5
- 188
- 188.5
- 189
- 189.5
- 190
- 190.5
- 191.5
- 192
- 193
- 193.5
- 195
- 195.5
- 196.5
- 200
- 207
- 208
- 210
- 211
- 214
- 216
- 216.5
- 220
- 222
- 225
- 225.5
- 227
- 228
- 230
- 230.5
- 231
- 232.5
- 233
- 233.5
- 234
- 236
- 236.5
- 238
- 238.5
- 240
- 240.5
- 241.5
- 242
- 243
- 243.5
- 245
- 245.5
- 246.5
- 250
- 281
- 330
- 400
- 500
- 600
-
Adjusting Bolt Shape Type
-
Body Material
-
Properties
- Standard
- Corrosion Resistance
- Oil Resistance
- Chemical Resistance
- Heat Resistance
- Vibration Control
- Impact Resistance
- Electrical Conductivity
-
Bottom Rubber Material
-
Mounting Shape Type
-
Thread Material
-
Main Body Surface Treatment
-
Swivel Angle θ(deg)
-
Height Adjusting Handle
-
Thread Surface Treatment
-
Swivel Mechanism
Narrow search by specifying Manufacturer
-
- DAIWARASHI (12)
- NABEYA (10)
- IMAO (5)
- TAKIGEN (5)
- TRUSCO NAKAYAMA (5)
- Jmec (4)
- SUN FASTENER (3)
- GIFUSANKENKOGYO (2)
- IWATA MFG (1)
- KURASHIKI KAKO (1)
- NANSIN (1)
- NABEYA BI-TECH (1)
- RICHENGINEERING (1)
- HIKARI (0)
- YAHATA (0)
- OHNISHI MFG (0)
- OHNORUBBER (0)
- WAKISANGYO (0)
CAD
-
- 2D
- 3D
Related Categories to Adjuster Bolt
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy