(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Shock Absorbers, Gas Springs（Page3）
Search by specifying the lower class category
| Days to Ship |
|
|---|
-
![FV Series [Short Stroke]](//my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/FV.jpg?$product_view_b$)
FUJI LATEX
A compact, characteristically fixed damper suitable for mounting in confined spaces due to the shortened stroke.
- CAD ：
- 2D
Standard Price: MYR 323.58- Days to Ship: 2 Day(s) or more -
![FWM-S Series [with Dustproof Seal]](//my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000017373_001.jpg?$product_view_b$)
FWM-S Series [with Dustproof Seal]
FUJI LATEX
[Features]
· Manufacturer's standard adjustable damper with a dust-proof seal installed, which can improve durability compared with manufacturer's standard products in environments with dust, etc.- CAD ：
- 2D
Standard Price: MYR 258.44- Days to Ship: 9 Day(s) or more -
![FW Series [Double Direction]](//my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/FW.jpg?$product_view_b$)
FUJI LATEX
This damper features piston rods on both sides and is resistant against shocks from either side. It is not resistant against shocks from both sides at a time.
- CAD ：
- 2D
Standard Price: MYR 389.13- Days to Ship: 4 Day(s) or more -
![Optional Parts [Urethane Foam Cap] OP-090 M36B](//my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000017395_003.jpg?$product_view_b$)
Optional Parts [Urethane Foam Cap] OP-090 M36B
FUJI LATEX
The sound absorbing cap decreases the impact noise when a load collides against the damper.
- CAD ：
- 2D
Standard Price: MYR 63.00 Days to Ship: 4 Day(s) or more -
![Optional Parts [Side-Mount] OP-M42SM](//my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000017418_003.jpg?$product_view_b$)
Optional Parts [Side-Mount] OP-M42SM
FUJI LATEX
Side mount for mounting dedicated for FA-4225B/FA-4250B/FA-4275B series Side mount is sold combining two pieces in a set.
- CAD ：
- 2D
Standard Price: MYR 556.74 Days to Ship: 27 Day(s) or more -
Optional Parts (Stopper Nut) OP-020EB
FUJI LATEX
This product prevents bottoming (resistance generating when the stroke end is mechanically impacted) from directly acting on the end of the damper. Be sure to use it when there is no external stopper.
[Features]
· Adjust to stop 1 mm before the stroke end, and fix firmly with the main body nut.- CAD ：
- 2D
Standard Price: MYR 42.60- Days to Ship: 4 Day(s) or more -
Optional Parts (Stopper Nut) OP-020FB
FUJI LATEX
Prevent direct application of bottoming (drag generated when a mechanical collision occurs at the stroke end) to the end of the damper. Make sure to use this when an external stopper is not available.
- CAD ：
- 2D
Standard Price: MYR 52.92- Days to Ship: 7 Day(s) or more -
Optional Parts (Stopper Nut) OP-020GB
FUJI LATEX
Prevent direct application of bottoming (drag generated when a mechanical collision occurs at the stroke end) to the end of the damper. Make sure to use this when an external stopper is not available.
- CAD ：
- 2D
Standard Price: MYR 46.24- Days to Ship: 4 Day(s) or more -
Optional Parts (Stopper Nut) OP-020KB
FUJI LATEX
This product prevents bottoming (resistance generating when the stroke end is mechanically impacted) from directly acting on the end of the damper. Be sure to use it when there is no external stopper.
[Features]
· The main body holder with switch can be ordered separately, but it is recommended to order it together with the main body.
· In the case, please notify us the model name of the main body.- CAD ：
- 2D
Standard Price: MYR 21.10- Days to Ship: 4 Day(s) or more -
Optional Parts (Stopper Nut) OP-020LB
FUJI LATEX
This product prevents bottoming (resistance generating when the stroke end is mechanically impacted) from directly acting on the end of the damper. Be sure to use it when there is no external stopper.
[Features]
· Adjust to stop 1 mm before the stroke end, and fix firmly with the main body nut.- CAD ：
- 2D
Standard Price: MYR 146.21 Days to Ship: 4 Day(s) or more -
Optional Parts (Stopper Nut) OP-020M36
FUJI LATEX
This product prevents bottoming (resistance generating when the stroke end is mechanically impacted) from directly acting on the end of the damper. Be sure to use it when there is no external stopper.
[Features]
· Adjust to stop 1 mm before the stroke end, and fix firmly with the main body nut.- CAD ：
- 2D
Standard Price: MYR 223.76 Days to Ship: 9 Day(s) or more -
Optional Parts (Stopper Nut) OP-020M42
FUJI LATEX
[Features]
Prevent direct application of bottoming (drag generated when a mechanical collision occurs at the stroke end) to the end of the damper.
Be sure to use this when an external stopper is not available.- CAD ：
- 2D
Standard Price: MYR 259.41 Days to Ship: 18 Day(s) or more -
Optional Parts (Stopper Nut) OP-020RB
FUJI LATEX
This product prevents bottoming (resistance generating when the stroke end is mechanically impacted) from directly acting on the end of the damper. Be sure to use it when there is no external stopper.
[Features]
· Adjust to stop 1 mm before the stroke end, and fix firmly with the main body nut.- CAD ：
- 2D
Standard Price: MYR 21.22- Days to Ship: 4 Day(s) or more -
Optional Parts (Stopper Nut) OP-020SB
FUJI LATEX
This product prevents bottoming (resistance generating when the stroke end is mechanically impacted) from directly acting on the end of the damper. Be sure to use it when there is no external stopper.
[Features]
· Adjust to stop 1 mm before the stroke end, and fix firmly with the main body nut.- CAD ：
- 2D
Standard Price: MYR 16.01- Days to Ship: 7 Day(s) or more -
Optional Parts (Stopper Nut) OP-020TB
FUJI LATEX
This product prevents bottoming (resistance generating when the stroke end is mechanically impacted) from directly acting on the end of the damper. Be sure to use it when there is no external stopper.
[Features]
· Adjust to stop 1 mm before the stroke end, and fix firmly with the main body nut.- CAD ：
- 2D
Standard Price: MYR 151.21- Days to Ship: 4 Day(s) or more -
Optional Parts (Stopper Nut) OP-020UB
FUJI LATEX
This product prevents bottoming (resistance generated when the stroke end is mechanically impacted) from directly acting on the end of the damper. Be sure to use it when there is no external stopper.
- CAD ：
- 2D
Standard Price: MYR 198.45- Days to Ship: 7 Day(s) or more -
FUJI LATEX
This is a dedicated round nut for the assembly of FA-4225B/FA-4250B/FA-4275B series.
- CAD ：
- 2D
Standard Price: MYR 60.56 Days to Ship: 4 Day(s) or more -
![Optional Parts [Eccentric Angle Adapter] OP-010EB](//content.misumi-ec.com/image/upload/t_product_view_b/v1/p/jp/product/series/221000017632/221000017632_001.jpg?$product_view_b$)
Optional Parts [Eccentric Angle Adapter] OP-010EB
FUJI LATEX
Can be used to improve damper durability when usage conditions involve an eccentric angle. In addition, it can also be used as a stopper nut. The maximum eccentric angle is 10 degrees.
- CAD ：
- 2D
Standard Price: MYR 202.65 Days to Ship: 4 Day(s) or more -
![Optional Parts [Eccentric Angle Adapter] OP-010FB](//my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000017643_003.jpg?$product_view_b$)
Optional Parts [Eccentric Angle Adapter] OP-010FB
FUJI LATEX
Can be used to improve damper durability when usage conditions involve an eccentric angle. In addition, it can also be used as a stopper nut. The maximum eccentric angle is 10 degrees.
- CAD ：
- 2D
Standard Price: MYR 469.31 Days to Ship: 4 Day(s) or more -
![Optional Parts [Eccentric Angle Adapter] OP-010KB](//my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000017665_003.jpg?$product_view_b$)
Optional Parts [Eccentric Angle Adapter] OP-010KB
FUJI LATEX
Damper durability is improved if the use conditions angle is eccentric. It can also be used as a stopper nut. The maximum usable eccentric angle is 10º.
- CAD ：
- 2D
Standard Price: MYR 86.22 Days to Ship: 4 Day(s) or more -
![Optional Parts [Eccentric Angle Adapter] OP-010PB](//my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000017687_003.jpg?$product_view_b$)
Optional Parts [Eccentric Angle Adapter] OP-010PB
FUJI LATEX
Can be used to improve damper durability when usage conditions involve an eccentric angle. It can also be used as a stopper nut. The maximum eccentric angle is 10 degrees.
[Features]
· Screw the eccentric angle adapter into the main body until the eccentric angle cap is securely fitted with the piston rod, and screw in the nuts on the main body tightly at this position.
· Use it when the eccentric angle is 2.5 degrees or more.
· The main body can also be used as a stopper.
· Use together with a capless soft absorber.
・The maximum eccentric angle is ±10 degrees in conjunction with the eccentric angle adapter.- CAD ：
- 2D
Standard Price: MYR 80.75 Days to Ship: 4 Day(s) or more -
![Optional Parts [Eccentric Angle Adapter] OP-010PMB](//my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000017698_003.jpg?$product_view_b$)
Optional Parts [Eccentric Angle Adapter] OP-010PMB
FUJI LATEX
Can be used to improve damper durability when usage conditions involve an eccentric angle. It can also be used as a stopper nut. The maximum eccentric angle is 10 degrees.
[Features]
· Screw the eccentric angle adapter into the main body until the eccentric angle cap is securely fitted with the piston rod, and screw in the nuts on the main body tightly at this position.
· Use it when the eccentric angle is 2.5 degrees or more.
· The main body can also be used as a stopper.
· Use together with a capless soft absorber.
・The maximum eccentric angle is ±10 degrees in conjunction with the eccentric angle adapter.- CAD ：
- 2D
Standard Price: MYR 75.51 Days to Ship: 4 Day(s) or more -
![Optional Parts [Eccentric Angle Adapter] OP-010RB](//my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000017700_003.jpg?$product_view_b$)
Optional Parts [Eccentric Angle Adapter] OP-010RB
FUJI LATEX
Can be used to improve damper durability when usage conditions involve an eccentric angle. It can also be used as a stopper nut. The maximum eccentric angle is 10 degrees.
[Features]
· Screw the eccentric angle adapter into the main body until the eccentric angle cap is securely fitted with the piston rod, and screw in the nuts on the main body tightly at this position.
· Use it when the eccentric angle is 2.5 degrees or more.
· The main body can also be used as a stopper.
· Use together with a capless soft absorber.
・The maximum eccentric angle is ±10 degrees in conjunction with the eccentric angle adapter.- CAD ：
- 2D
Standard Price: MYR 98.45 Days to Ship: 4 Day(s) or more -
![Optional Parts [Eccentric Angle Adapter] OP-010TB](//my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000017733_003.jpg?$product_view_b$)
Optional Parts [Eccentric Angle Adapter] OP-010TB
FUJI LATEX
Can be used to improve damper durability when usage conditions involve an eccentric angle. In addition, it can also be used as a stopper nut. The maximum eccentric angle is 10 degrees.
[Features]
· Screw the eccentric angle adapter into the main body until the eccentric angle cap is securely fitted with the piston rod, and screw in the nuts on the main body tightly at this position.
· Use it when the eccentric angle is 2.5 degrees or more.
· The main body can also be used as a stopper.
· Use together with a capless soft absorber.
・The maximum eccentric angle is ±10 degrees used in conjunction with the eccentric angle adapter.- CAD ：
- 2D
Standard Price: MYR 768.75 Days to Ship: 4 Day(s) or more -
![Optional Parts [Eccentric Angle Adapter] OP-010UB](//my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000017744_003.jpg?$product_view_b$)
Optional Parts [Eccentric Angle Adapter] OP-010UB
FUJI LATEX
Durability can be improved in use conditions where the eccentric angle is effective. It can also be used as a stopper nut. The maximum use eccentric angle is 10 degrees.
- CAD ：
- 2D
Standard Price: MYR 940.09 Days to Ship: 7 Day(s) or more -
![Optional Parts [Eccentric Angle Adapter] OP-010XB](//my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000017755_003.jpg?$product_view_b$)
Optional Parts [Eccentric Angle Adapter] OP-010XB
FUJI LATEX
Can be used to improve damper durability when usage conditions involve an eccentric angle. It can also be used as a stopper nut. The maximum eccentric angle is 10 degrees.
[Features]
· Screw the eccentric angle adapter into the main body until the eccentric angle cap is securely fitted with the piston rod, and screw in the nuts on the main body securely at this position.
· Use it when the eccentric angle is 2.5 degrees or more.
· The main body can also be used as a stopper.
· Use together with a capless soft absorber.
・The maximum eccentric angle is ±10 degrees in conjunction with the eccentric angle adapter.- CAD ：
- 2D
Standard Price: MYR 108.51 Days to Ship: 4 Day(s) or more -
![Optional Parts [Square Flange] OP-040 M42SF](//my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000017766_003.jpg?$product_view_b$)
Optional Parts [Square Flange] OP-040 M42SF
FUJI LATEX
Mounting square flange dedicated for FA-4225B/FA-4250B/FA-4275B series.
- CAD ：
- 2D
Standard Price: MYR 261.68 Days to Ship: 12 Day(s) or more -
![Optional Parts [Square Flange] OP-040EB](//my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000017777_003.jpg?$product_view_b$)
Optional Parts [Square Flange] OP-040EB
FUJI LATEX
Dampers can be mounted using a square flange.
- CAD ：
- 2D
Standard Price: MYR 48.31 Days to Ship: 18 Day(s) or more -
![Optional Parts [Square Flange] OP-040FB](//my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000017788_003.jpg?$product_view_b$)
Optional Parts [Square Flange] OP-040FB
FUJI LATEX
Dampers can be mounted using a square flange.
- CAD ：
- 2D
Standard Price: MYR 60.95 Days to Ship: 18 Day(s) or more -
![Optional Parts [Square Flange] OP-040GB](//my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000017799_003.jpg?$product_view_b$)
Optional Parts [Square Flange] OP-040GB
FUJI LATEX
Dampers can be mounted using a square flange.
- CAD ：
- 2D
Standard Price: MYR 96.29 Days to Ship: 18 Day(s) or more -
![Optional Parts [Square Flange] OP-040RB](//my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000017823_003.jpg?$product_view_b$)
Optional Parts [Square Flange] OP-040RB
FUJI LATEX
Dampers can be mounted using a square flange.
- CAD ：
- 2D
Standard Price: MYR 54.62 Days to Ship: 18 Day(s) or more -
![Optional Parts [Square Flange] OP-040SB](//my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000017834_003.jpg?$product_view_b$)
Optional Parts [Square Flange] OP-040SB
FUJI LATEX
Dampers can be mounted using a square flange.
- CAD ：
- 2D
Standard Price: MYR 48.59 Days to Ship: 18 Day(s) or more -
![Optional Parts [Square Flange] OP-040XB](//my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000017867_003.jpg?$product_view_b$)
Optional Parts [Square Flange] OP-040XB
FUJI LATEX
A square-shaped flange can be used for attaching the damper.
- CAD ：
- 2D
Standard Price: MYR 57.41 Days to Ship: 18 Day(s) or more -
![Optional Parts [Rectangular Flange] OP-040 M42RF](//my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000017878_003.jpg?$product_view_b$)
Optional Parts [Rectangular Flange] OP-040 M42RF
FUJI LATEX
This is a dedicated rectangular flange for attaching the FA-4225B/FA-4250B/FA-4275B series.
- CAD ：
- 2D
Standard Price: MYR 205.17 Days to Ship: 18 Day(s) or more -
![Optional Parts [Drip-Proof Cap] FA-1005PMB□-C-060](//my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000017889_003.jpg?$product_view_b$)
Optional Parts [Drip-Proof Cap] FA-1005PMB□-C-060
FUJI LATEX
Useful for usage in an environment where liquid such as oil scatters. Basically, use with face up. Drip proof is ineffective when used on side or face down. This product is offered with the main body as a set.
- CAD ：
- 2D
Standard Price: MYR 210.21 Days to Ship: 18 Day(s) or more -
![Optional Parts [Drip-Proof Cap] FK-1008□-C-060](//my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000017935_003.jpg?$product_view_b$)
Optional Parts [Drip-Proof Cap] FK-1008□-C-060
FUJI LATEX
Useful in an environment where liquids such as oil scatter. Basically, use with face up. Drip-proofing is ineffective when used horizontally or face down. This product is offered with the main body as a set.
- CAD ：
- 2D
Standard Price: MYR 230.23 Days to Ship: 18 Day(s) or more -
![Optional Parts [Drip-Proof Cap] FK-1210□-C-060](//my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000017946_003.jpg?$product_view_b$)
Optional Parts [Drip-Proof Cap] FK-1210□-C-060
FUJI LATEX
Useful in an environment where liquids such as oil scatter. Basically, use with face up. Drip-proofing is ineffective when used horizontally or face down. This product is offered with the main body as a set.
- CAD ：
- 2D
Standard Price: MYR 209.89 Days to Ship: 18 Day(s) or more -
![Optional Parts [Drip-Proof Cap] FK-2016□-C-060](//my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000017979_003.jpg?$product_view_b$)
Optional Parts [Drip-Proof Cap] FK-2016□-C-060
FUJI LATEX
Useful for usage in an environment where liquid such as oil scatters. Basically, use with face up. Drip proof is ineffective when used on side or face down. This product is offered with the main body as a set.
- CAD ：
- 2D
Standard Price: MYR 344.69- Days to Ship: 13 Day(s) or more -
![Optional Parts [Drip-Proof Cap] F□□-1210M□□-C-060](//my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000018015_003.jpg?$product_view_b$)
Optional Parts [Drip-Proof Cap] F□□-1210M□□-C-060
FUJI LATEX
Useful in an environment where liquids such as oil scatter. Basically, use with face up. Drip-proofing is ineffective when used horizontally or face down. This product is offered with the main body as a set.
- CAD ：
- 2D
Standard Price: MYR 358.26 Days to Ship: 9 Day(s) or more -
![Optional Parts [Drip-Proof Cap] F□□-1410R□□-C-060](//my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000018026_003.jpg?$product_view_b$)
Optional Parts [Drip-Proof Cap] F□□-1410R□□-C-060
FUJI LATEX
Useful in an environment where liquids such as oil scatter. Basically, use with face up. Drip-proofing is ineffective when used horizontally or face down. This product is offered with the main body as a set.
- CAD ：
- 2D
Standard Price: MYR 243.61- Days to Ship: 9 Day(s) or more -
![Optional Parts [Drip-Proof Cap] F□□-1612X□□-C-060](//my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000018037_003.jpg?$product_view_b$)
Optional Parts [Drip-Proof Cap] F□□-1612X□□-C-060
FUJI LATEX
Useful in an environment where liquids such as oil scatter. Basically, use with face up. Drip-proofing is ineffective when used horizontally or face down. This product is offered with the main body as a set.
- CAD ：
- 2D
Standard Price: MYR 512.29 Days to Ship: 12 Day(s) or more -
![Optional Parts [Drip-Proof Cap] F□□-2530G□□-C-060](//my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000018059_003.jpg?$product_view_b$)
Optional Parts [Drip-Proof Cap] F□□-2530G□□-C-060
FUJI LATEX
Useful for environments where liquid such as oil scatters. This product is to be used facing upward. Facing side or downward will not provide effective drip prevention. Sold in package with the main unit.
[Features]
· Please use when operating in environments where oil may spatter.
· Please be sure to use with the cap facing upward.
· When used sideways or facing downward, drip-proof effect is diminished.
· Enter model description A or WM in □ for F□□.
・Enter model description B, D or BD in □ for G□□.- CAD ：
- 2D
Standard Price: MYR 546.59 Days to Ship: 27 Day(s) or more -
![Optional Parts [Drip-Proof Cap] F□□-3035T□□-C-060](//my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000018071_003.jpg?$product_view_b$)
Optional Parts [Drip-Proof Cap] F□□-3035T□□-C-060
FUJI LATEX
Useful for usage in an environment where liquid such as oil scatters. This product is to be used facing upward. Facing side or downward will not provide effective drip prevention. Sold in package with the main unit.
[Features]
· Please use when operating in environments where oil may spatter.
· Please be sure to use with the cap facing upward.
· When used sideways or facing downward, drip-proof effect is diminished.
· Enter model description A or WM in □ for F□□.
・D or BD is entered in □ of the model code T□□.- CAD ：
- 2D
Standard Price: MYR 1,132.59 Days to Ship: 27 Day(s) or more -
KURASHIKI KAKO
Buffering of the impact energy by large stroke is possible. Impact force can be reduced.
[Features]
・Because of its foam structure, almost twice the deflection rate can be obtained.
・Buffering of the impact energy by large stroke is possible.
・When urethane foams are compressed, the internal foams are compressed so that the protrusion to the side of the buffer body is minimum.
・When the compression rate is 70%, outer diameter increases by approximately 30%, one third of natural rubber.- CAD ：
- 2D
Standard Price: MYR 228.28- Days to Ship: 5 Day(s) or more -
Safety Net for Urethane Foam Buffer
KURASHIKI KAKO
Highly strong, abrasion- and heat-resistant, waterproof Cremona rope is used for safety net.
Standard Price: MYR 194.05- Days to Ship: 9 Day(s) or more
![FV Series [Short Stroke]](http://my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/FV.jpg?$product_view_b$)
![FWM-S Series [with Dustproof Seal]](http://my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000017373_001.jpg?$product_view_b$)
![FW Series [Double Direction]](http://my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/FW.jpg?$product_view_b$)
![Optional Parts [Urethane Foam Cap] OP-090 M36B](http://my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000017395_003.jpg?$product_view_b$)
![Optional Parts [Side-Mount] OP-M42SM](http://my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000017418_003.jpg?$product_view_b$)
![Optional Parts [Eccentric Angle Adapter] OP-010EB](http://content.misumi-ec.com/image/upload/t_product_view_b/v1/p/jp/product/series/221000017632/221000017632_001.jpg?$product_view_b$)
![Optional Parts [Eccentric Angle Adapter] OP-010FB](http://my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000017643_003.jpg?$product_view_b$)
![Optional Parts [Eccentric Angle Adapter] OP-010KB](http://my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000017665_003.jpg?$product_view_b$)
![Optional Parts [Eccentric Angle Adapter] OP-010PB](http://my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000017687_003.jpg?$product_view_b$)
![Optional Parts [Eccentric Angle Adapter] OP-010PMB](http://my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000017698_003.jpg?$product_view_b$)
![Optional Parts [Eccentric Angle Adapter] OP-010RB](http://my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000017700_003.jpg?$product_view_b$)
![Optional Parts [Eccentric Angle Adapter] OP-010TB](http://my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000017733_003.jpg?$product_view_b$)
![Optional Parts [Eccentric Angle Adapter] OP-010UB](http://my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000017744_003.jpg?$product_view_b$)
![Optional Parts [Eccentric Angle Adapter] OP-010XB](http://my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000017755_003.jpg?$product_view_b$)
![Optional Parts [Square Flange] OP-040 M42SF](http://my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000017766_003.jpg?$product_view_b$)
![Optional Parts [Square Flange] OP-040EB](http://my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000017777_003.jpg?$product_view_b$)
![Optional Parts [Square Flange] OP-040FB](http://my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000017788_003.jpg?$product_view_b$)
![Optional Parts [Square Flange] OP-040GB](http://my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000017799_003.jpg?$product_view_b$)
![Optional Parts [Square Flange] OP-040RB](http://my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000017823_003.jpg?$product_view_b$)
![Optional Parts [Square Flange] OP-040SB](http://my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000017834_003.jpg?$product_view_b$)
![Optional Parts [Square Flange] OP-040XB](http://my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000017867_003.jpg?$product_view_b$)
![Optional Parts [Rectangular Flange] OP-040 M42RF](http://my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000017878_003.jpg?$product_view_b$)
![Optional Parts [Drip-Proof Cap] FA-1005PMB□-C-060](http://my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000017889_003.jpg?$product_view_b$)
![Optional Parts [Drip-Proof Cap] FK-1008□-C-060](http://my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000017935_003.jpg?$product_view_b$)
![Optional Parts [Drip-Proof Cap] FK-1210□-C-060](http://my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000017946_003.jpg?$product_view_b$)
![Optional Parts [Drip-Proof Cap] FK-2016□-C-060](http://my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000017979_003.jpg?$product_view_b$)
![Optional Parts [Drip-Proof Cap] F□□-1210M□□-C-060](http://my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000018015_003.jpg?$product_view_b$)
![Optional Parts [Drip-Proof Cap] F□□-1410R□□-C-060](http://my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000018026_003.jpg?$product_view_b$)
![Optional Parts [Drip-Proof Cap] F□□-1612X□□-C-060](http://my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000018037_003.jpg?$product_view_b$)
![Optional Parts [Drip-Proof Cap] F□□-2530G□□-C-060](http://my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000018059_003.jpg?$product_view_b$)
![Optional Parts [Drip-Proof Cap] F□□-3035T□□-C-060](http://my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000018071_003.jpg?$product_view_b$)
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Structure |
| Nominal Mounting Screw [M] |
| Overall Length L(mm) |
| Stroke S(mm) |
| Max. Absorbed Energy(J) |
| Main Body, Related Components |
| Orifice Type |
| Operating Environment |
| Body Material |
| Nominal Mounting Screw [Inch] |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | FUJI LATEX | FUJI LATEX | FUJI LATEX | FUJI LATEX | FUJI LATEX | FUJI LATEX | FUJI LATEX | FUJI LATEX | FUJI LATEX | FUJI LATEX | FUJI LATEX | FUJI LATEX | FUJI LATEX | FUJI LATEX | FUJI LATEX | FUJI LATEX | FUJI LATEX | FUJI LATEX | FUJI LATEX | FUJI LATEX | FUJI LATEX | FUJI LATEX | FUJI LATEX | FUJI LATEX | FUJI LATEX | FUJI LATEX | FUJI LATEX | FUJI LATEX | FUJI LATEX | FUJI LATEX | FUJI LATEX | FUJI LATEX | FUJI LATEX | FUJI LATEX | FUJI LATEX | FUJI LATEX | FUJI LATEX | FUJI LATEX | FUJI LATEX | FUJI LATEX | FUJI LATEX | FUJI LATEX | FUJI LATEX | KURASHIKI KAKO | KURASHIKI KAKO |
| Product Series | |||||||||||||||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Days to Ship | 2 Day(s) or more | 9 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 27 Day(s) or more | 4 Day(s) or more | 7 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 9 Day(s) or more | 18 Day(s) or more | 4 Day(s) or more | 7 Day(s) or more | 4 Day(s) or more | 7 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 7 Day(s) or more | 4 Day(s) or more | 12 Day(s) or more | 18 Day(s) or more | 18 Day(s) or more | 18 Day(s) or more | 18 Day(s) or more | 18 Day(s) or more | 18 Day(s) or more | 18 Day(s) or more | 18 Day(s) or more | 18 Day(s) or more | 18 Day(s) or more | 13 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 12 Day(s) or more | 27 Day(s) or more | 27 Day(s) or more | 5 Day(s) or more | 9 Day(s) or more |
| Structure | Fixed Type | Adjustable Type | Fixed Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Fixed Type | - |
| Nominal Mounting Screw [M] | 20 ～ 27 | 12 ～ 36 | 16 ～ 25 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 27 | 36 | 18 | 16 | 16 | 22 | 40 | 45 | 22 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 8 ～ 24 | - |
| Overall Length L(mm) | 55 | 76 ～ 235 | 134 ～ 241 | 10 | - | 30 ～ 47 | 35 ～ 55 | 20 ～ 32 | 12 ～ 16 | 50 | 45 | 59 | 12 ～ 20 | 10 ～ 15 | 38 ～ 58 | 45 ～ 65 | - | 68 | 97 | 48 | 38 | 28 | 51 | 127 | 167 | 60 | - | - | - | - | - | - | - | - | 15 | 18 | 28 | 35 | 28 | 30 | 34 | 51 | 60 | 54 ～ 547 | - |
| Stroke S(mm) | 8 | 10 ～ 50 | 16 ～ 25 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 16 | 25 | 10 | 8 | 5 | 10 | 35 | 50 | 12 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Max. Absorbed Energy(J) | 8.8 ～ 19.6 | 4.9 ～ 392 | 13.7 ～ 62.7 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Main Body, Related Components | Main Body | Main Body | Main Body | Related Components | Related Components | Related Components | Related Components | Related Components | Related Components | Related Components | Related Components | Related Components | Related Components | Related Components | Related Components | Related Components | Related Components | Related Components | Related Components | Related Components | Related Components | Related Components | Related Components | Related Components | Related Components | Related Components | Related Components | Related Components | Related Components | Related Components | Related Components | Related Components | Related Components | Related Components | Related Components | Related Components | Related Components | Related Components | Related Components | Related Components | Related Components | Related Components | Related Components | Main Body | Related Components |
| Orifice Type | Multi Orifice Type | Irregular Multi Orifice Type | Multi Orifice Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Operating Environment | Standard | Dust Resistance | Standard | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Body Material | Steel | Steel | Steel | Others | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Brass | - |
| Nominal Mounting Screw [Inch] | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
![FV Series [Short Stroke]](http://my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/FV.jpg?$product_view_c$)
![FWM-S Series [with Dustproof Seal]](http://my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000017373_001.jpg?$product_view_c$)
![FW Series [Double Direction]](http://my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/FW.jpg?$product_view_c$)
![Optional Parts [Urethane Foam Cap] OP-090 M36B](http://my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000017395_003.jpg?$product_view_c$)
![Optional Parts [Side-Mount] OP-M42SM](http://my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000017418_003.jpg?$product_view_c$)
![Optional Parts [Eccentric Angle Adapter] OP-010EB](http://content.misumi-ec.com/image/upload/t_product_view_c/v1/p/jp/product/series/221000017632/221000017632_001.jpg?$product_view_c$)
![Optional Parts [Eccentric Angle Adapter] OP-010FB](http://my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000017643_003.jpg?$product_view_c$)
![Optional Parts [Eccentric Angle Adapter] OP-010KB](http://my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000017665_003.jpg?$product_view_c$)
![Optional Parts [Eccentric Angle Adapter] OP-010PB](http://my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000017687_003.jpg?$product_view_c$)
![Optional Parts [Eccentric Angle Adapter] OP-010PMB](http://my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000017698_003.jpg?$product_view_c$)
![Optional Parts [Eccentric Angle Adapter] OP-010RB](http://my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000017700_003.jpg?$product_view_c$)
![Optional Parts [Eccentric Angle Adapter] OP-010TB](http://my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000017733_003.jpg?$product_view_c$)
![Optional Parts [Eccentric Angle Adapter] OP-010UB](http://my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000017744_003.jpg?$product_view_c$)
![Optional Parts [Eccentric Angle Adapter] OP-010XB](http://my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000017755_003.jpg?$product_view_c$)
![Optional Parts [Square Flange] OP-040 M42SF](http://my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000017766_003.jpg?$product_view_c$)
![Optional Parts [Square Flange] OP-040EB](http://my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000017777_003.jpg?$product_view_c$)
![Optional Parts [Square Flange] OP-040FB](http://my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000017788_003.jpg?$product_view_c$)
![Optional Parts [Square Flange] OP-040GB](http://my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000017799_003.jpg?$product_view_c$)
![Optional Parts [Square Flange] OP-040RB](http://my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000017823_003.jpg?$product_view_c$)
![Optional Parts [Square Flange] OP-040SB](http://my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000017834_003.jpg?$product_view_c$)
![Optional Parts [Square Flange] OP-040XB](http://my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000017867_003.jpg?$product_view_c$)
![Optional Parts [Rectangular Flange] OP-040 M42RF](http://my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000017878_003.jpg?$product_view_c$)
![Optional Parts [Drip-Proof Cap] FA-1005PMB□-C-060](http://my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000017889_003.jpg?$product_view_c$)
![Optional Parts [Drip-Proof Cap] FK-1008□-C-060](http://my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000017935_003.jpg?$product_view_c$)
![Optional Parts [Drip-Proof Cap] FK-1210□-C-060](http://my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000017946_003.jpg?$product_view_c$)
![Optional Parts [Drip-Proof Cap] FK-2016□-C-060](http://my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000017979_003.jpg?$product_view_c$)
![Optional Parts [Drip-Proof Cap] F□□-1210M□□-C-060](http://my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000018015_003.jpg?$product_view_c$)
![Optional Parts [Drip-Proof Cap] F□□-1410R□□-C-060](http://my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000018026_003.jpg?$product_view_c$)
![Optional Parts [Drip-Proof Cap] F□□-1612X□□-C-060](http://my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000018037_003.jpg?$product_view_c$)
![Optional Parts [Drip-Proof Cap] F□□-2530G□□-C-060](http://my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000018059_003.jpg?$product_view_c$)
![Optional Parts [Drip-Proof Cap] F□□-3035T□□-C-060](http://my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000018071_003.jpg?$product_view_c$)
Loading...
Configure
Specification/Dimensions
-
Structure
-
Nominal Mounting Screw [M]
-
Overall Length L(mm)
- 10
- 11
- 12
- 13
- 15
- 16
- 18
- 20
- 25
- 28
- 28.5
- 28.6
- 29
- 29.5
- 29.6
- 30
- 30.5
- 31
- 32
- 32.5
- 32.6
- 32.7
- 33
- 33.3
- 33.5
- 33.6
- 34
- 34.5
- 35
- 35.4
- 35.5
- 36
- 37
- 37.1
- 38
- 38.5
- 38.7
- 39
- 39.5
- 40
- 40.5
- 41.5
- 42
- 42.6
- 44
- 44.5
- 45
- 45.5
- 45.8
- 46
- 46.6
- 46.8
- 47
- 48
- 49
- 50
- 51
- 51.3
- 51.5
- 52
- 52.3
- 52.7
- 53
- 53.7
- 54
- 54.3
- 54.5
- 55
- 55.3
- 56
- 57
- 57.5
- 58
- 58.5
- 58.9
- 59
- 60
- 60.2
- 61
- 61.3
- 61.5
- 62
- 62.3
- 62.5
- 62.6
- 62.7
- 63
- 63.7
- 64
- 65
- 65.2
- 66
- 67
- 68
- 69
- 69.2
- 69.4
- 69.5
- 70
- 71
- 71.5
- 72
- 72.4
- 73.2
- 75
- 76
- 77
- 77.1
- 78
- 78.3
- 79
- 79.1
- 79.3
- 79.5
- 80
- 80.5
- 81
- 82
- 82.5
- 82.6
- 83.1
- 84
- 84.1
- 85
- 86
- 87
- 88
- 88.2
- 88.5
- 89.5
- 90
- 90.6
- 91
- 91.5
- 91.8
- 92
- 92.2
- 92.6
- 92.8
- 93
- 93.5
- 94.6
- 95.2
- 95.5
- 96
- 96.6
- 97
- 97.5
- 98
- 98.2
- 98.5
- 99
- 100
- 100.2
- 101
- 101.5
- 102
- 103
- 103.1
- 103.8
- 105
- 105.2
- 106.1
- 107
- 107.2
- 107.5
- 107.7
- 108
- 108.2
- 108.5
- 109.5
- 110
- 111
- 111.4
- 112
- 112.5
- 113.5
- 114
- 115
- 116
- 117
- 117.5
- 118.5
- 120
- 121
- 122
- 122.5
- 122.7
- 123
- 124
- 124.5
- 125
- 126.5
- 127
- 128
- 128.8
- 129
- 129.5
- 130
- 130.5
- 131
- 131.7
- 132.5
- 133
- 134
- 136
- 137
- 137.5
- 138
- 138.5
- 139
- 139.2
- 140
- 141
- 141.5
- 142
- 143
- 143.5
- 144
- 145.8
- 147
- 148.8
- 149
- 150
- 152.5
- 152.8
- 153
- 154
- 155
- 155.3
- 156
- 157.4
- 157.8
- 158
- 160
- 161.6
- 162
- 164
- 165
- 166
- 167
- 167.5
- 170
- 171.5
- 172
- 173
- 175.6
- 176
- 180
- 183
- 185
- 185.5
- 186
- 188
- 190
- 191
- 192.5
- 195
- 200.5
- 202
- 204
- 205
- 205.6
- 206.5
- 212.5
- 213
- 214
- 217
- 218
- 218.5
- 220
- 220.5
- 221.5
- 222
- 223.5
- 226
- 228
- 230
- 232
- 235
- 237
- 238
- 241
- 243
- 245.5
- 246
- 246.5
- 247
- 254.5
- 256.3
- 257.1
- 264
- 265
- 267
- 277.1
- 291.5
- 298.4
- 302.5
- 312
- 316
- 317
- 322
- 341
- 343
- 345
- 356.3
- 391
- 397
- 419
- 456
- 456.3
- 466
- 471
- 472
- 473
- 514
- 547
- 643
-
Stroke S(mm)
- 3
- 3.7
- 4
- 4.5
- 5
- 6
- 6.4
- 7
- 7.6
- 8
- 8.5
- 9.9
- 10
- 10.4
- 11
- 12
- 12.3
- 12.7
- 13
- 14
- 14.5
- 15
- 16
- 17
- 19.5
- 20
- 21.5
- 22
- 25
- 25, 50, 75
- 30
- 35
- 40
- 45
- 50
- 50, 100
- 60
- 70
- 75
- 80
- 90
- 100
- 125
- 150
- 165
- 200
-
Max. Absorbed Energy(J)
- 0.049
- 0.098
- 0.1
- 0.2
- 0.25
- 0.29
- 0.294
- 0.3
- 0.39
- 0.4
- 0.49
- 0.5
- 0.6
- 0.68
- 0.75
- 0.8
- 0.98
- 1
- 1,300
- 1.02
- 1.2
- 1.25
- 1.4
- 1.47
- 1.5
- 1.6
- 1.76
- 1.77
- 1.8
- 1.96
- 2
- 2,260
- 2,300
- 2.2
- 2.4
- 2.45
- 2.5
- 2.8
- 2.9
- 2.94
- 3
- 3.25
- 3.43
- 3.5
- 3.62
- 3.7
- 3.8
- 3.9
- 3.92
- 4
- 4,000
- 4,520
- 4.5
- 4.8
- 4.9
- 5
- 5,700
- 5.4
- 5.5
- 5.88
- 5.9
- 6
- 6,780
- 6.3
- 6.5
- 6.86
- 7
- 7,300
- 7.5
- 7.8
- 8
- 8.8
- 9
- 9.8
- 9.81
- 10
- 11.7
- 11.8
- 12
- 12.5
- 13
- 13.7
- 14.7
- 15
- 15.6
- 16.6
- 17.6
- 19.6
- 20
- 21
- 22
- 23
- 24
- 24.5
- 25
- 25.4
- 25.5
- 26
- 26.4
- 28
- 29.4
- 30
- 32
- 33.3
- 34
- 35
- 39
- 39.2
- 40
- 44.1
- 45
- 45.8
- 46.8
- 49
- 50
- 52
- 52.7
- 53.7
- 54
- 55
- 58.8
- 59
- 60
- 62.7
- 63.7
- 70
- 73,450
- 74
- 74.5
- 75
- 78.3
- 78.4
- 79
- 79.3
- 79.4
- 80
- 85
- 88.2
- 90
- 96,050
- 98
- 100
- 105
- 110
- 117
- 118
- 118,650
- 120
- 124
- 125
- 135
- 140
- 147
- 150
- 160
- 192
- 196
- 200
- 235
- 250
- 260
- 270
- 294
- 300
- 367
- 384
- 392
- 425
- 441
- 450
- 500
- 588
- 720
- 750
- 780
- 850
- 1050
- 1200
- 1250
- 1300
- 2400
- 2550
- 3600
- 3750
- 4500
- 6780
- 8000
- 12000
- 15000
- 15400
- 18000
- 21000
- 25000
- 30000
- 41000
- 92000
- 150000
-
Main Body, Related Components
-
Orifice Type
-
Operating Environment
-
Body Material
-
Nominal Mounting Screw [Inch]
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
Related Categories to Shock Absorbers, Gas Springs
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy