(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Shock Absorbers, Gas Springs（Body Material：Steel Page2）
Search by specifying the lower class category
| Days to Ship |
|
|---|
-
Shock Absorber Adjustable Type FCK Series
CKD
Shock killer available in three models: 1 m/s low speed model, 2 m/s medium speed model, and 3 m/s high speed model, allowing optimum selection *The CAD data for this series is being revised. This will be available as soon as modifications are complete.
Standard Price: MYR 294.27- Days to Ship: 5 Day(s) or more -
S Auxiliary Device Shock Absorber KSH Series
KOGANEI
- Shock absorber adjustable absorption capacity type, KSH series from Koganei.
- KSH Series shock absorber is single orifice type, Optimum for low-speed impact.
- Can be select rod end type with or without cap by indicate “C” in product code.
- Can be select mounting type “Nose mounting”, “Side mounting” or “Flange mounting”.
- Can add a stopper nut by entry “-S” at the end of part number.
- Maximum impact speed (m/s): 1.0
- Maximum operating frequency (cycle/min): 30
- Operating temperature range (°C): 0 to 60°CStandard Price: MYR 365.34- Days to Ship: 4 Day(s) or more -
TAIYO
Small, lightweight analog-adjustable two-stage motion screw shock absorber
[Features]
· absorbs the shock absorber adjusting absorbed energy.
· Front half of the stroke indicates the perforated and the latter half the single hole energy absorption property.
· Threading on the outer diameter makes handling just as easy as bolt attachment.
· Suitable for air cylinder shock absorption.- CAD ：
- 2D
Standard Price: MYR 718.30- Days to Ship: 33 Day(s) or more -
ENIDINE
*The CAD data for this series is being revised. This will be available as soon as modifications are complete.
[Features]
Fixed type large shock absorber that supports high energy.Standard Price: MYR 1,241.47 Days to Ship: 13 Day(s) or more -
ENIDINE
Positioning and preventing shock absorbers from bottoming *The CAD data for this series is being revised. This will be available as soon as modifications are complete.
- CAD ：
- 2D
Standard Price: MYR 14.30- Days to Ship: 4 Day(s) or more -
ENIDINE
*The CAD data for this series is being revised. This will be available as soon as modifications are complete.
[Features]
Simplifies mounting of large shock absorbers.- CAD ：
- 2D
Standard Price: MYR 83.66- Days to Ship: 4 Day(s) or more -
Standard Price: MYR 1,215.73- Days to Ship: 11 Day(s) or more -
FESTO
- Shock absorber DYSW series from FESTO.
- Hydraulic shock absorber with path-controlled flow control function.
- Slowly increasing cushioning force curve.
- Long cushioning stroke (6, 8, 10, 14, 17, 20 mm).
- Suitable for low-vibration operation.
- Short cycle times possible.
- Maintenance-free.
- Metal end position on the housing.
- Continuous mounting thread with internal hex.
- Operating Environment Temperature: -10 to 80℃
- Impact velocity (m/s): 0.1 to 3
- To increase the service life: Prevent dirt or liquids getting into the inner chamber of the piston via the piston rod (e.g., by using a cover).Standard Price: MYR 999.05 Days to Ship: Quote -
Shock Absorbers Coolant Resistant
MISUMI
[Features]·The sealing structure is designed to prevent external liquid from infiltrating, and can be used in environments where cutting oil, etc., is applied, making it suitable for machine tool applications. ·The outer diameter thread size for mounting is the same as the standard type, so replacement is possible. ·It is suitable for water-soluble cutting oil Class A1 "JIS K2241-2000," but it can also be used in water-insoluble cutting oil or in an environment where it is exposed to water. (Water is less durable than water-soluble cutting oil.)
- Volume Discount
Standard Price: MYR 251.87- Days to Ship: 5 Day(s) or more -
MISUMI
[Features]This is a more compact type than normal absorbers. It can be used in places where space is limited.
- Volume Discount
Standard Price: MYR 277.57- Days to Ship: 1 Day(s) or more -
FA-1010D Series Optional Bracket
FUJI LATEX
Dedicated fitting for FA-1010D series.
[Features]
・Fitting for FA-1010D series.- CAD ：
- 2D
Standard Price: MYR 19.26 Days to Ship: 9 Day(s) or more -
FA-1210MB/FA-1210MD/FWM-1210MBD Series
FUJI LATEX
Our standard characteristic adjustable dampers, with wide outer thread diameter range from M8 to M42, and variable shock absorbing characteristics.
- CAD ：
- 2D
Standard Price: MYR 208.64- Days to Ship: 4 Day(s) or more -
FA-2530GB/FA-2530GD/FWM-2530GBD Series
FUJI LATEX
Our standard characteristic adjustable dampers, with an abundance of sizes from compact M8 to large M42 outer screw diameters and variable shock absorbing properties.
- CAD ：
- 2D
Standard Price: MYR 462.98- Days to Ship: 4 Day(s) or more -
FA-2540LB/FA-2540LD/FWM-2540LBD Series
FUJI LATEX
Our standard characteristic adjustable dampers, with an abundance of sizes from compact M8 to large M42 outer screw diameters and variable shock absorbing properties.
- CAD ：
- 2D
Standard Price: MYR 573.52- Days to Ship: 4 Day(s) or more -
FA-2725FB/FA-2725FD/FWM-2725FBD Series
FUJI LATEX
Our standard characteristic adjustable dampers, with an abundance of sizes from compact M8 to large M42 outer screw diameters and variable shock absorbing properties.
- CAD ：
- 2D
Standard Price: MYR 501.81- Days to Ship: 4 Day(s) or more -
FUJI LATEX
[Features]
· Part of the manufacturer's standard special adjustment type dampers with selection of various sizes from M8 to M42, and shock-absorbing characteristics.- CAD ：
- 2D
Standard Price: MYR 806.53- Days to Ship: 4 Day(s) or more -
FUJI LATEX
[Features]
· Part of the manufacturer's standard special adjustment type dampers with selection of various sizes from M8 to M42, and shock-absorbing characteristics.- CAD ：
- 2D
Standard Price: MYR 685.83 Days to Ship: 4 Day(s) or more -
FUJI LATEX
Our standard property adjustable dampers, with wide outer thread diameter range from M8 to M42, and variable shock absorbing properties.
- CAD ：
- 2D
Standard Price: MYR 973.52- Days to Ship: 7 Day(s) or more -
FUJI LATEX
Our standard large fixed dampers These dampers are available in wide range of shock absorbing properties and from to small thread outer diameter M4.
- CAD ：
- 2D
Standard Price: MYR 436.33- Days to Ship: 7 Day(s) or more -
![FS Series [Short Stroke]](//my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/FS.jpg?$product_view_b$)
FUJI LATEX
A compact, characteristically adjustable damper suitable for mounting in confined spaces due to the shortened stroke.
- CAD ：
- 2D
Standard Price: MYR 408.16- Days to Ship: 4 Day(s) or more -
![FV Series [Short Stroke]](//my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/FV.jpg?$product_view_b$)
FUJI LATEX
A compact, characteristically fixed damper suitable for mounting in confined spaces due to the shortened stroke.
- CAD ：
- 2D
Standard Price: MYR 323.58- Days to Ship: 2 Day(s) or more -
![FWM-S Series [with Dustproof Seal]](//my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000017373_001.jpg?$product_view_b$)
FWM-S Series [with Dustproof Seal]
FUJI LATEX
[Features]
· Manufacturer's standard adjustable damper with a dust-proof seal installed, which can improve durability compared with manufacturer's standard products in environments with dust, etc.- CAD ：
- 2D
Standard Price: MYR 258.44- Days to Ship: 9 Day(s) or more -
![FW Series [Double Direction]](//my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/FW.jpg?$product_view_b$)
FUJI LATEX
This damper features piston rods on both sides and is resistant against shocks from either side. It is not resistant against shocks from both sides at a time.
- CAD ：
- 2D
Standard Price: MYR 389.13- Days to Ship: 4 Day(s) or more -
![Optional Parts [Side-Mount] OP-M42SM](//my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000017418_003.jpg?$product_view_b$)
Optional Parts [Side-Mount] OP-M42SM
FUJI LATEX
Side mount for mounting dedicated for FA-4225B/FA-4250B/FA-4275B series Side mount is sold combining two pieces in a set.
- CAD ：
- 2D
Standard Price: MYR 556.74 Days to Ship: 27 Day(s) or more -
Optional Parts (Stopper Nut) OP-020EB
FUJI LATEX
This product prevents bottoming (resistance generating when the stroke end is mechanically impacted) from directly acting on the end of the damper. Be sure to use it when there is no external stopper.
[Features]
· Adjust to stop 1 mm before the stroke end, and fix firmly with the main body nut.- CAD ：
- 2D
Standard Price: MYR 42.60- Days to Ship: 4 Day(s) or more -
Optional Parts (Stopper Nut) OP-020FB
FUJI LATEX
Prevent direct application of bottoming (drag generated when a mechanical collision occurs at the stroke end) to the end of the damper. Make sure to use this when an external stopper is not available.
- CAD ：
- 2D
Standard Price: MYR 52.92- Days to Ship: 7 Day(s) or more -
Optional Parts (Stopper Nut) OP-020GB
FUJI LATEX
Prevent direct application of bottoming (drag generated when a mechanical collision occurs at the stroke end) to the end of the damper. Make sure to use this when an external stopper is not available.
- CAD ：
- 2D
Standard Price: MYR 46.24- Days to Ship: 4 Day(s) or more -
Optional Parts (Stopper Nut) OP-020KB
FUJI LATEX
This product prevents bottoming (resistance generating when the stroke end is mechanically impacted) from directly acting on the end of the damper. Be sure to use it when there is no external stopper.
[Features]
· The main body holder with switch can be ordered separately, but it is recommended to order it together with the main body.
· In the case, please notify us the model name of the main body.- CAD ：
- 2D
Standard Price: MYR 21.10- Days to Ship: 4 Day(s) or more -
Optional Parts (Stopper Nut) OP-020LB
FUJI LATEX
This product prevents bottoming (resistance generating when the stroke end is mechanically impacted) from directly acting on the end of the damper. Be sure to use it when there is no external stopper.
[Features]
· Adjust to stop 1 mm before the stroke end, and fix firmly with the main body nut.- CAD ：
- 2D
Standard Price: MYR 146.21 Days to Ship: 4 Day(s) or more -
Optional Parts (Stopper Nut) OP-020M36
FUJI LATEX
This product prevents bottoming (resistance generating when the stroke end is mechanically impacted) from directly acting on the end of the damper. Be sure to use it when there is no external stopper.
[Features]
· Adjust to stop 1 mm before the stroke end, and fix firmly with the main body nut.- CAD ：
- 2D
Standard Price: MYR 223.76 Days to Ship: 9 Day(s) or more -
Optional Parts (Stopper Nut) OP-020M42
FUJI LATEX
[Features]
Prevent direct application of bottoming (drag generated when a mechanical collision occurs at the stroke end) to the end of the damper.
Be sure to use this when an external stopper is not available.- CAD ：
- 2D
Standard Price: MYR 259.41 Days to Ship: 18 Day(s) or more -
Optional Parts (Stopper Nut) OP-020RB
FUJI LATEX
This product prevents bottoming (resistance generating when the stroke end is mechanically impacted) from directly acting on the end of the damper. Be sure to use it when there is no external stopper.
[Features]
· Adjust to stop 1 mm before the stroke end, and fix firmly with the main body nut.- CAD ：
- 2D
Standard Price: MYR 21.22- Days to Ship: 4 Day(s) or more -
Optional Parts (Stopper Nut) OP-020SB
FUJI LATEX
This product prevents bottoming (resistance generating when the stroke end is mechanically impacted) from directly acting on the end of the damper. Be sure to use it when there is no external stopper.
[Features]
· Adjust to stop 1 mm before the stroke end, and fix firmly with the main body nut.- CAD ：
- 2D
Standard Price: MYR 16.01- Days to Ship: 7 Day(s) or more -
Optional Parts (Stopper Nut) OP-020TB
FUJI LATEX
This product prevents bottoming (resistance generating when the stroke end is mechanically impacted) from directly acting on the end of the damper. Be sure to use it when there is no external stopper.
[Features]
· Adjust to stop 1 mm before the stroke end, and fix firmly with the main body nut.- CAD ：
- 2D
Standard Price: MYR 151.21- Days to Ship: 4 Day(s) or more -
Optional Parts (Stopper Nut) OP-020UB
FUJI LATEX
This product prevents bottoming (resistance generated when the stroke end is mechanically impacted) from directly acting on the end of the damper. Be sure to use it when there is no external stopper.
- CAD ：
- 2D
Standard Price: MYR 198.45- Days to Ship: 7 Day(s) or more -
FUJI LATEX
This is a dedicated round nut for the assembly of FA-4225B/FA-4250B/FA-4275B series.
- CAD ：
- 2D
Standard Price: MYR 60.56 Days to Ship: 4 Day(s) or more -
![Optional Parts [Eccentric Angle Adapter] OP-010EB](//content.misumi-ec.com/image/upload/t_product_view_b/v1/p/jp/product/series/221000017632/221000017632_001.jpg?$product_view_b$)
Optional Parts [Eccentric Angle Adapter] OP-010EB
FUJI LATEX
Can be used to improve damper durability when usage conditions involve an eccentric angle. In addition, it can also be used as a stopper nut. The maximum eccentric angle is 10 degrees.
- CAD ：
- 2D
Standard Price: MYR 202.65 Days to Ship: 4 Day(s) or more -
![Optional Parts [Eccentric Angle Adapter] OP-010FB](//my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000017643_003.jpg?$product_view_b$)
Optional Parts [Eccentric Angle Adapter] OP-010FB
FUJI LATEX
Can be used to improve damper durability when usage conditions involve an eccentric angle. In addition, it can also be used as a stopper nut. The maximum eccentric angle is 10 degrees.
- CAD ：
- 2D
Standard Price: MYR 469.31 Days to Ship: 4 Day(s) or more -
![Optional Parts [Eccentric Angle Adapter] OP-010KB](//my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000017665_003.jpg?$product_view_b$)
Optional Parts [Eccentric Angle Adapter] OP-010KB
FUJI LATEX
Damper durability is improved if the use conditions angle is eccentric. It can also be used as a stopper nut. The maximum usable eccentric angle is 10º.
- CAD ：
- 2D
Standard Price: MYR 86.22 Days to Ship: 4 Day(s) or more -
![Optional Parts [Eccentric Angle Adapter] OP-010PB](//my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000017687_003.jpg?$product_view_b$)
Optional Parts [Eccentric Angle Adapter] OP-010PB
FUJI LATEX
Can be used to improve damper durability when usage conditions involve an eccentric angle. It can also be used as a stopper nut. The maximum eccentric angle is 10 degrees.
[Features]
· Screw the eccentric angle adapter into the main body until the eccentric angle cap is securely fitted with the piston rod, and screw in the nuts on the main body tightly at this position.
· Use it when the eccentric angle is 2.5 degrees or more.
· The main body can also be used as a stopper.
· Use together with a capless soft absorber.
・The maximum eccentric angle is ±10 degrees in conjunction with the eccentric angle adapter.- CAD ：
- 2D
Standard Price: MYR 80.75 Days to Ship: 4 Day(s) or more -
![Optional Parts [Eccentric Angle Adapter] OP-010PMB](//my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000017698_003.jpg?$product_view_b$)
Optional Parts [Eccentric Angle Adapter] OP-010PMB
FUJI LATEX
Can be used to improve damper durability when usage conditions involve an eccentric angle. It can also be used as a stopper nut. The maximum eccentric angle is 10 degrees.
[Features]
· Screw the eccentric angle adapter into the main body until the eccentric angle cap is securely fitted with the piston rod, and screw in the nuts on the main body tightly at this position.
· Use it when the eccentric angle is 2.5 degrees or more.
· The main body can also be used as a stopper.
· Use together with a capless soft absorber.
・The maximum eccentric angle is ±10 degrees in conjunction with the eccentric angle adapter.- CAD ：
- 2D
Standard Price: MYR 75.51 Days to Ship: 4 Day(s) or more -
![Optional Parts [Eccentric Angle Adapter] OP-010RB](//my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000017700_003.jpg?$product_view_b$)
Optional Parts [Eccentric Angle Adapter] OP-010RB
FUJI LATEX
Can be used to improve damper durability when usage conditions involve an eccentric angle. It can also be used as a stopper nut. The maximum eccentric angle is 10 degrees.
[Features]
· Screw the eccentric angle adapter into the main body until the eccentric angle cap is securely fitted with the piston rod, and screw in the nuts on the main body tightly at this position.
· Use it when the eccentric angle is 2.5 degrees or more.
· The main body can also be used as a stopper.
· Use together with a capless soft absorber.
・The maximum eccentric angle is ±10 degrees in conjunction with the eccentric angle adapter.- CAD ：
- 2D
Standard Price: MYR 98.45 Days to Ship: 4 Day(s) or more -
![Optional Parts [Eccentric Angle Adapter] OP-010TB](//my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000017733_003.jpg?$product_view_b$)
Optional Parts [Eccentric Angle Adapter] OP-010TB
FUJI LATEX
Can be used to improve damper durability when usage conditions involve an eccentric angle. In addition, it can also be used as a stopper nut. The maximum eccentric angle is 10 degrees.
[Features]
· Screw the eccentric angle adapter into the main body until the eccentric angle cap is securely fitted with the piston rod, and screw in the nuts on the main body tightly at this position.
· Use it when the eccentric angle is 2.5 degrees or more.
· The main body can also be used as a stopper.
· Use together with a capless soft absorber.
・The maximum eccentric angle is ±10 degrees used in conjunction with the eccentric angle adapter.- CAD ：
- 2D
Standard Price: MYR 768.75 Days to Ship: 4 Day(s) or more -
![Optional Parts [Eccentric Angle Adapter] OP-010UB](//my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000017744_003.jpg?$product_view_b$)
Optional Parts [Eccentric Angle Adapter] OP-010UB
FUJI LATEX
Durability can be improved in use conditions where the eccentric angle is effective. It can also be used as a stopper nut. The maximum use eccentric angle is 10 degrees.
- CAD ：
- 2D
Standard Price: MYR 940.09 Days to Ship: 7 Day(s) or more -
![Optional Parts [Eccentric Angle Adapter] OP-010XB](//my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000017755_003.jpg?$product_view_b$)
Optional Parts [Eccentric Angle Adapter] OP-010XB
FUJI LATEX
Can be used to improve damper durability when usage conditions involve an eccentric angle. It can also be used as a stopper nut. The maximum eccentric angle is 10 degrees.
[Features]
· Screw the eccentric angle adapter into the main body until the eccentric angle cap is securely fitted with the piston rod, and screw in the nuts on the main body securely at this position.
· Use it when the eccentric angle is 2.5 degrees or more.
· The main body can also be used as a stopper.
· Use together with a capless soft absorber.
・The maximum eccentric angle is ±10 degrees in conjunction with the eccentric angle adapter.- CAD ：
- 2D
Standard Price: MYR 108.51 Days to Ship: 4 Day(s) or more
![FS Series [Short Stroke]](http://my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/FS.jpg?$product_view_b$)
![FV Series [Short Stroke]](http://my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/FV.jpg?$product_view_b$)
![FWM-S Series [with Dustproof Seal]](http://my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000017373_001.jpg?$product_view_b$)
![FW Series [Double Direction]](http://my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/FW.jpg?$product_view_b$)
![Optional Parts [Side-Mount] OP-M42SM](http://my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000017418_003.jpg?$product_view_b$)
![Optional Parts [Eccentric Angle Adapter] OP-010EB](http://content.misumi-ec.com/image/upload/t_product_view_b/v1/p/jp/product/series/221000017632/221000017632_001.jpg?$product_view_b$)
![Optional Parts [Eccentric Angle Adapter] OP-010FB](http://my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000017643_003.jpg?$product_view_b$)
![Optional Parts [Eccentric Angle Adapter] OP-010KB](http://my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000017665_003.jpg?$product_view_b$)
![Optional Parts [Eccentric Angle Adapter] OP-010PB](http://my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000017687_003.jpg?$product_view_b$)
![Optional Parts [Eccentric Angle Adapter] OP-010PMB](http://my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000017698_003.jpg?$product_view_b$)
![Optional Parts [Eccentric Angle Adapter] OP-010RB](http://my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000017700_003.jpg?$product_view_b$)
![Optional Parts [Eccentric Angle Adapter] OP-010TB](http://my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000017733_003.jpg?$product_view_b$)
![Optional Parts [Eccentric Angle Adapter] OP-010UB](http://my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000017744_003.jpg?$product_view_b$)
![Optional Parts [Eccentric Angle Adapter] OP-010XB](http://my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000017755_003.jpg?$product_view_b$)
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Structure |
| Nominal Mounting Screw [M] |
| Overall Length L(mm) |
| Stroke S(mm) |
| Max. Absorbed Energy(J) |
| Main Body, Related Components |
| Orifice Type |
| Operating Environment |
| Body Material |
| Nominal Mounting Screw [Inch] |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | CKD | KOGANEI | TAIYO | ENIDINE | ENIDINE | ENIDINE | HANSUNG | FESTO | MISUMI | MISUMI | FUJI LATEX | FUJI LATEX | FUJI LATEX | FUJI LATEX | FUJI LATEX | FUJI LATEX | FUJI LATEX | FUJI LATEX | FUJI LATEX | FUJI LATEX | FUJI LATEX | FUJI LATEX | FUJI LATEX | FUJI LATEX | FUJI LATEX | FUJI LATEX | FUJI LATEX | FUJI LATEX | FUJI LATEX | FUJI LATEX | FUJI LATEX | FUJI LATEX | FUJI LATEX | FUJI LATEX | FUJI LATEX | FUJI LATEX | FUJI LATEX | FUJI LATEX | FUJI LATEX | FUJI LATEX | FUJI LATEX | FUJI LATEX | FUJI LATEX | FUJI LATEX | FUJI LATEX |
| Product Series | |||||||||||||||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Days to Ship | 5 Day(s) or more | 4 Day(s) or more | 33 Day(s) or more | 13 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 11 Day(s) or more | Quote | 5 Day(s) or more | 1 Day(s) or more | 9 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 4 Day(s) or more | 2 Day(s) or more | 9 Day(s) or more | 4 Day(s) or more | 27 Day(s) or more | 4 Day(s) or more | 7 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 9 Day(s) or more | 18 Day(s) or more | 4 Day(s) or more | 7 Day(s) or more | 4 Day(s) or more | 7 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 7 Day(s) or more | 4 Day(s) or more |
| Structure | Adjustable Type | Adjustable Type | Adjustable Type | Fixed Type | - | - | Adjustable Type | - | Adjustable Type | Fixed Type | - | Adjustable Type | Adjustable Type | Adjustable Type | Adjustable Type | Adjustable Type | Adjustable Type | Adjustable Type | Fixed Type | Adjustable Type | Fixed Type | Adjustable Type | Fixed Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Nominal Mounting Screw [M] | - | 10 ～ 20 | 27 | 45 | 10 ～ 36 | 33 ～ 64 | - | - | - | 14 ～ 27 | - | 12 | 25 | 25 | 27 | 30 | 36 | 36 | 27 ～ 36 | 20 ～ 27 | 20 ～ 27 | 12 ～ 36 | 16 ～ 25 | - | - | - | - | - | - | - | - | - | - | - | - | - | 27 | 36 | 18 | 16 | 16 | 22 | 40 | 45 | 22 |
| Overall Length L(mm) | 58.9 ～ 302.5 | 68 ～ 165 | 136 ～ 156 | 144 | - | - | 167 ～ 471 | - | 73.2 ～ 137 | 46 ～ 55 | - | 76 ～ 84 | 155 ～ 173 | 200.5 | 136 ～ 156 | 188 ～ 206.5 | 150 | 235 ～ 254.5 | 117.5 ～ 238 | 55 | 55 | 76 ～ 235 | 134 ～ 241 | - | 30 ～ 47 | 35 ～ 55 | 20 ～ 32 | 12 ～ 16 | 50 | 45 | 59 | 12 ～ 20 | 10 ～ 15 | 38 ～ 58 | 45 ～ 65 | - | 68 | 97 | 48 | 38 | 28 | 51 | 127 | 167 | 60 |
| Stroke S(mm) | 8 ～ 80 | 8 ～ 22 | 25 | 25 | - | - | 25 ～ 150 | - | 8 ～ 16 | 6 ～ 8 | - | 10 | 30 | 40 | 25 | 35 | 25 | 50 | 25 ～ 50 | 6 | 8 | 10 ～ 50 | 16 ～ 25 | - | - | - | - | - | - | - | - | - | - | - | - | - | 16 | 25 | 10 | 8 | 5 | 10 | 35 | 50 | 12 |
| Max. Absorbed Energy(J) | 1.5 ～ 720 | 1.5 ～ 24.5 | 79.4 | 367 | - | - | 250 ～ 3750 | 15000 | 1.47 ～ 29.4 | 4.5 ～ 19.6 | - | 2.94 ～ 4.9 | 49 | 63.7 | 79.3 | 196 | 200 | 392 | 79 ～ 392 | 7.8 ～ 15.6 | 8.8 ～ 19.6 | 4.9 ～ 392 | 13.7 ～ 62.7 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Main Body, Related Components | Main Body | Main Body | Main Body | Main Body | Related Components | Related Components | Main Body | - | Main Body | Main Body | Related Components | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Related Components | Related Components | Related Components | Related Components | Related Components | Related Components | Related Components | Related Components | Related Components | Related Components | Related Components | Related Components | Related Components | Related Components | Related Components | Related Components | Related Components | Related Components | Related Components | Related Components | Related Components | Related Components |
| Orifice Type | Irregular Multi Orifice Type ～ Single Orifice Type | Single Orifice Type | Irregular Multi Orifice Type | Multi Orifice Type | - | - | Multi Orifice Type | - | Irregular Multi Orifice Type ～ Tapered orifice | Tapered orifice | - | Irregular Multi Orifice Type ～ Single Orifice Type | Irregular Multi Orifice Type ～ Single Orifice Type | Irregular Multi Orifice Type ～ Single Orifice Type | Irregular Multi Orifice Type ～ Single Orifice Type | Irregular Multi Orifice Type ～ Multi Orifice Type | Multi Orifice Type | Irregular Multi Orifice Type ～ Multi Orifice Type | Multi Orifice Type | Single Orifice Type | Multi Orifice Type | Irregular Multi Orifice Type | Multi Orifice Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Operating Environment | Standard | Standard | Standard | Standard | - | - | - | - | Coolant Resistant | Standard | - | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Dust Resistance | Standard | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Body Material | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel |
| Nominal Mounting Screw [Inch] | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
![FS Series [Short Stroke]](http://my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/FS.jpg?$product_view_c$)
![FV Series [Short Stroke]](http://my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/FV.jpg?$product_view_c$)
![FWM-S Series [with Dustproof Seal]](http://my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000017373_001.jpg?$product_view_c$)
![FW Series [Double Direction]](http://my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/FW.jpg?$product_view_c$)
![Optional Parts [Side-Mount] OP-M42SM](http://my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000017418_003.jpg?$product_view_c$)
![Optional Parts [Eccentric Angle Adapter] OP-010EB](http://content.misumi-ec.com/image/upload/t_product_view_c/v1/p/jp/product/series/221000017632/221000017632_001.jpg?$product_view_c$)
![Optional Parts [Eccentric Angle Adapter] OP-010FB](http://my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000017643_003.jpg?$product_view_c$)
![Optional Parts [Eccentric Angle Adapter] OP-010KB](http://my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000017665_003.jpg?$product_view_c$)
![Optional Parts [Eccentric Angle Adapter] OP-010PB](http://my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000017687_003.jpg?$product_view_c$)
![Optional Parts [Eccentric Angle Adapter] OP-010PMB](http://my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000017698_003.jpg?$product_view_c$)
![Optional Parts [Eccentric Angle Adapter] OP-010RB](http://my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000017700_003.jpg?$product_view_c$)
![Optional Parts [Eccentric Angle Adapter] OP-010TB](http://my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000017733_003.jpg?$product_view_c$)
![Optional Parts [Eccentric Angle Adapter] OP-010UB](http://my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000017744_003.jpg?$product_view_c$)
![Optional Parts [Eccentric Angle Adapter] OP-010XB](http://my.misumi-ec.com/linked/material/mech/FUL1/PHOTO/221000017755_003.jpg?$product_view_c$)
Loading...
Configure
Specification/Dimensions
-
Structure
-
Nominal Mounting Screw [M]
-
Overall Length L(mm)
- 10
- 11
- 12
- 13
- 15
- 16
- 18
- 20
- 25
- 28
- 28.5
- 28.6
- 29
- 29.5
- 29.6
- 30
- 30.5
- 31
- 32
- 32.5
- 32.6
- 32.7
- 33
- 33.3
- 33.5
- 33.6
- 34
- 34.5
- 35
- 35.4
- 35.5
- 36
- 37
- 37.1
- 38
- 38.5
- 38.7
- 39
- 39.5
- 40
- 40.5
- 41.5
- 42
- 42.6
- 44
- 44.5
- 45
- 45.5
- 45.8
- 46
- 46.6
- 46.8
- 47
- 48
- 49
- 50
- 51
- 51.3
- 51.5
- 52
- 52.3
- 52.7
- 53
- 53.7
- 54
- 54.3
- 54.5
- 55
- 55.3
- 56
- 57
- 57.5
- 58
- 58.5
- 58.9
- 59
- 60
- 60.2
- 61
- 61.3
- 61.5
- 62
- 62.3
- 62.5
- 62.6
- 62.7
- 63
- 63.7
- 64
- 65
- 65.2
- 66
- 67
- 68
- 69
- 69.2
- 69.4
- 69.5
- 70
- 71
- 71.5
- 72
- 72.4
- 73.2
- 75
- 76
- 77
- 77.1
- 78
- 78.3
- 79
- 79.1
- 79.3
- 79.5
- 80
- 80.5
- 81
- 82
- 82.5
- 82.6
- 83.1
- 84
- 84.1
- 85
- 86
- 87
- 88
- 88.2
- 88.5
- 89.5
- 90
- 90.6
- 91
- 91.5
- 91.8
- 92
- 92.2
- 92.6
- 92.8
- 93
- 93.5
- 94.6
- 95.2
- 95.5
- 96
- 96.6
- 97
- 97.5
- 98
- 98.2
- 98.5
- 99
- 100
- 100.2
- 101
- 101.5
- 102
- 103
- 103.1
- 103.8
- 105
- 105.2
- 106.1
- 107
- 107.2
- 107.5
- 107.7
- 108
- 108.2
- 108.5
- 109.5
- 110
- 111
- 111.4
- 112
- 112.5
- 113.5
- 114
- 115
- 116
- 117
- 117.5
- 118.5
- 120
- 121
- 122
- 122.5
- 122.7
- 123
- 124
- 124.5
- 125
- 126.5
- 127
- 128
- 128.8
- 129
- 129.5
- 130
- 130.5
- 131
- 131.7
- 132.5
- 133
- 134
- 136
- 137
- 137.5
- 138
- 138.5
- 139
- 139.2
- 140
- 141
- 141.5
- 142
- 143
- 143.5
- 144
- 145.8
- 147
- 148.8
- 149
- 150
- 152.5
- 152.8
- 153
- 154
- 155
- 155.3
- 156
- 157.4
- 157.8
- 158
- 160
- 161.6
- 162
- 164
- 165
- 166
- 167
- 167.5
- 170
- 171.5
- 172
- 173
- 175.6
- 176
- 180
- 183
- 185
- 185.5
- 186
- 188
- 190
- 191
- 192.5
- 195
- 200.5
- 202
- 204
- 205
- 205.6
- 206.5
- 212.5
- 213
- 214
- 217
- 218
- 218.5
- 220
- 220.5
- 221.5
- 222
- 223.5
- 226
- 228
- 230
- 232
- 235
- 237
- 238
- 241
- 243
- 245.5
- 246
- 246.5
- 247
- 254.5
- 256.3
- 257.1
- 264
- 265
- 267
- 277.1
- 291.5
- 298.4
- 302.5
- 312
- 316
- 317
- 322
- 341
- 343
- 345
- 356.3
- 391
- 397
- 419
- 456
- 456.3
- 466
- 471
- 472
- 473
- 514
- 547
- 643
-
Stroke S(mm)
-
Max. Absorbed Energy(J)
- 0.049
- 0.098
- 0.1
- 0.2
- 0.25
- 0.29
- 0.294
- 0.3
- 0.39
- 0.4
- 0.49
- 0.5
- 0.6
- 0.68
- 0.75
- 0.8
- 0.98
- 1
- 1,300
- 1.02
- 1.2
- 1.25
- 1.4
- 1.47
- 1.5
- 1.6
- 1.76
- 1.77
- 1.8
- 1.96
- 2
- 2,260
- 2,300
- 2.2
- 2.4
- 2.45
- 2.5
- 2.8
- 2.9
- 2.94
- 3
- 3.25
- 3.43
- 3.5
- 3.62
- 3.7
- 3.8
- 3.9
- 3.92
- 4
- 4,000
- 4,520
- 4.5
- 4.8
- 4.9
- 5
- 5,700
- 5.4
- 5.5
- 5.88
- 5.9
- 6
- 6,780
- 6.3
- 6.5
- 6.86
- 7
- 7,300
- 7.5
- 7.8
- 8
- 8.8
- 9
- 9.8
- 9.81
- 10
- 11.7
- 11.8
- 12
- 12.5
- 13
- 13.7
- 14.7
- 15
- 15.6
- 16.6
- 17.6
- 19.6
- 20
- 21
- 22
- 23
- 24
- 24.5
- 25
- 25.4
- 25.5
- 26
- 26.4
- 28
- 29.4
- 30
- 32
- 33.3
- 34
- 35
- 39
- 39.2
- 40
- 44.1
- 45
- 45.8
- 46.8
- 49
- 50
- 52
- 52.7
- 53.7
- 54
- 55
- 58.8
- 59
- 60
- 62.7
- 63.7
- 70
- 73,450
- 74
- 74.5
- 75
- 78.3
- 78.4
- 79
- 79.3
- 79.4
- 80
- 85
- 88.2
- 90
- 96,050
- 98
- 100
- 105
- 110
- 117
- 118
- 118,650
- 120
- 124
- 125
- 135
- 140
- 147
- 150
- 160
- 192
- 196
- 200
- 235
- 250
- 260
- 270
- 294
- 300
- 367
- 384
- 392
- 425
- 441
- 450
- 500
- 588
- 720
- 750
- 780
- 850
- 1050
- 1200
- 1250
- 1300
- 2400
- 2550
- 3600
- 3750
- 4500
- 6780
- 8000
- 12000
- 15000
- 15400
- 18000
- 21000
- 25000
- 30000
- 41000
- 92000
- 150000
-
Main Body, Related Components
- Main Body
- Related Components
-
Orifice Type
-
Operating Environment
- Standard
- Coolant Resistant
- Dust Resistance
- Copper Group not Used
-
Body Material
- Stainless Steel
- Brass
- Steel
- Resin
- Aluminum
- Others
-
Nominal Mounting Screw [Inch]
Narrow search by specifying Manufacturer
-
- FUJI LATEX (69)
- ENIDINE (12)
- TAIYO (12)
- SMC (8)
- FESTO (5)
- CHELIC (4)
- HANSUNG (4)
- KOGANEI (4)
- CKD (2)
- ACE CONTROLS (1)
- AIRTAC (1)
- IMAO (1)
- TAKIGEN (1)
- NABEYA BI-TECH (0)
- KURASHIKI KAKO (0)
CAD
-
- 2D
- 3D
Related Categories to Shock Absorbers, Gas Springs
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy