(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
| Days to Ship |
|
|---|

Round Wire Coil Springs/Deflection 45%/O.D. Referenced
MISUMI
This is a standardized series so that the spring constant is constant for the same diameter.
[Features]
· UV/UY type, Maximum allowable deflection 75%
· UR type, Maximum allowable deflection 60%
· UF type, Maximum allowable deflection 40%
| Standard Price: | MYR 5.67- |
|---|---|
| Days to Ship: | 1 Day(s) or more |

Round Wire Coil Springs/Deflection 40%/O.D. Referenced
MISUMI
This is a standardized series so that the spring constant is constant for the same diameter.
[Features]
· UL/UTT type, Allowable maximum deflection 40%
| Standard Price: | MYR 5.67- |
|---|---|
| Days to Ship: | 1 Day(s) or more |

Ultra Spring Compression Coil Spring
ACCURATE
UltraSpring control loading at two-points: Load @ Standard Height and Load @ Allowable Height (= height @ compressed length). Therefore, UltraSpring maintain their load characteristics closer to their calculated life based on these general allowable maximum deflections.
[Accurate Quality Control]
All UltraSpring products manufactured by Accurate Inc. have lot numbers and full traceability.
| Standard Price: | MYR 3.48- |
|---|---|
| Days to Ship: | 1 Day(s) or more |

Round Wire Coil Springs/Deflection 45%/I.D. Referenced
MISUMI
This is a standardized series so that the spring constant is constant for the same diameter.
| Standard Price: | MYR 10.20- |
|---|---|
| Days to Ship: | 1 Day(s) or more |

Round Wire Coil Springs/Deflection 27%-30%/O.D. Referenced
MISUMI
This is a standardized series so that the spring constant is constant for the same diameter.
[Features]
· UM type, Maximum allowable deflection 28-35%
· UH type, Maximum allowable deflection 20-30%
| Standard Price: | MYR 6.80- |
|---|---|
| Days to Ship: | 1 Day(s) or more |

Round Wire Coil Springs - L Dimension Configurable, O.D. Referenced Stainless Steel
MISUMI
Outer diameter size (Φ9, Φ11, Φ13, Φ15, Φ17, Φ25, Φ27) standard added!
A compression spring that can specify the L dimension in units of 1 mm.
The outer diameter and length can be freely specified according to the intended use.
Piano wire is also based on the outer diameter.
| Days to Ship: | 6 Day(s) or more |
|---|

D Series Compression Coil Spring (DIN 2098 Standard)【20 Pieces Per Package】
KSSC
Cylindrical compression coil spring following the DIN 2098 standard, popular in Germany.
| Standard Price: | MYR 70.74- |
|---|---|
| Days to Ship: | 2 Day(s) or more |
| Standard Price: | MYR 4.46- |
|---|---|
| Days to Ship: | 1 Day(s) or more |
| Standard Price: | MYR 3.86- |
|---|---|
| Days to Ship: | 1 Day(s) or more |
| Standard Price: | MYR 3.86- |
|---|---|
| Days to Ship: | 1 Day(s) or more |

Compression Coil Spring, SWP-A/SUS304WP-B【5-20 Pieces Per Package】
SHOWA SPRING
A standardized spring made of general cold-formed piano wire or stainless steel wire.
| Standard Price: | MYR 22.16- |
|---|---|
| Days to Ship: | 5 Day(s) or more |

SAMINI
[Materials]SUS304-WPB SWP-A
[Max. Load] 0.81–114.6 N
[O.D.] 1.7–100φ
[Free Length] 5–400 mm
| Standard Price: | MYR 9.55- |
|---|---|
| Days to Ship: | 2 Day(s) or more |

Round Wire Coil Springs/Deflection 15%-25%/O.D. Referenced
MISUMI
This is a standardized series so that the spring constant is constant for the same diameter.
[Features]
· Maximum allowable deflection 25%
| Standard Price: | MYR 13.60 |
|---|---|
| Days to Ship: | 4 Day(s) or more |

KSSC
Spring compliant with Japan Spring Manufactures Association Standard (JSMA No.7-cylinder type compression coil spring).
| Standard Price: | MYR 70.74- |
|---|---|
| Days to Ship: | 2 Day(s) or more |
| Standard Price: | MYR 4.20- |
|---|---|
| Days to Ship: | 1 Day(s) or more |

Compressed Spring, C Series【1-5 Pieces Per Package】
SHINSEIHATUJYO
Standard compressed spring produced by our unique thorough quality control and technology.
[Features]
· General most used springs and widely used for light loads to heavy loads.
· A simple and compact shape, with high energy absorption and no friction.
· Mechanism that adds characteristics by changing the material diameter, coil diameter and pitch.
[Usage]
· Applies to repairs and works of daily commodities and toys.
· Can be processed and used as needed.
· For trial of machine parts.
| Standard Price: | MYR 10.35- |
|---|---|
| Days to Ship: | 2 Day(s) or more |
![[Clean & Pack]Round Wire Coil Springs - O.D. Referenced Stainless Steel, UL/UTT](http://content.misumi-ec.com/image/upload/t_product_view_b/v1/p/jp/product/series/110310747629/110310747629_001_20230911105917.jpg?$product_view_b$)
[Clean & Pack]Round Wire Coil Springs - O.D. Referenced Stainless Steel, UL/UTT
MISUMI
| ·Degreasing (Anti-rust single packing) | : Part Number SL-□□ |
| ·Precision cleaning (Degassing double packing) | : Part Number SH-□□ |
| ·Electrolytic polishing + precision cleaning (Degassing double packing) | : Part Number SHD-□□ |
| Product Part Number | Cleaning Method | Packaging Type | Effects Compared to Uncleaned Product | Environment (Standard) | Process |
| SL-□□ | Degreasing | Anti-rust packing | Oil removal | General environment | Regular assembly process |
| Post battery assembly process | |||||
| SH-□□ | Precision cleaning | Degassing double packing | Oil removal Dust removal | Clean environment (Class 10 to 1,000) | Battery assembly process |
| LCD-related post assembly process | |||||
| In-vehicle camera assembly process | |||||
| SHD-□□ | Electrolytic polishing + precision cleaning | Degassing double packing | Oil removal Dust removal Outgas reduction | Vacuum environment Clean environment (Class 10 to 1,000) | Pre-semiconductor process |
| Liquid crystal deposition process | |||||
| Pre-OLED process |
The series is standardized to maintain the spring constant uniformly to the same diameter.
SL-UL / SH-UL/ SHD-UL / SL-UTT / SH-UTT / SHD-UTT Type···Allowable Max. Deflection 40%
| Days to Ship: | Quote |
|---|

Polyetheretherketone / Plastic Spring PEEK / PB
NIPPONCHEMICAL
Nippon Chemical Screw Irregular Shaped Wire Coil Spring Polyetheretherketone/Plastic Spring PEEK/PB.
| Standard Price: | MYR 53.94- |
|---|---|
| Days to Ship: | 8 Day(s) or more |

SAMINI
- Made of Inconel X-750, delivering high performance under environments that require heat resistance.
- Recommended operating temperature: Up to 450℃.
| Standard Price: | MYR 105.87- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

Polyacetal / Plastic Spring POM / PB
NIPPONCHEMICAL
[Features]
·The adhesion length and spring constant are reference values.
·It is adjusted to correspond to various materials.
·Please feel free to contact us if there is a material you would like to purchase.
·Durability and chemical resistance will vary depending on the conditions of use, so be sure to test in advance under conditions of use.
| Standard Price: | MYR 13.59- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

Polycarbonate / Plastic Spring PC / PB
NIPPONCHEMICAL
[Features]
·The adhesion length and spring constant are reference values.
·It is adjusted to correspond to various materials.
·Please feel free to contact us if there is a material you would like to purchase.
·Durability and chemical resistance will vary depending on the conditions of use, so be sure to test in advance under conditions of use.
| Standard Price: | MYR 13.94- |
|---|---|
| Days to Ship: | 8 Day(s) or more |

Polyacetal/Plastic Spring POM/PB
NIPPONCHEMICAL
This nonmagnetic spring is used for MRI equipment. No need to separate out from the plastic casing on disposal. Durability and chemical resistance varies depending on operating environment. Test in your operating environment before use.
| Standard Price: | MYR 22.30- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

Polyetheretherketone/Plastic Spring PEEK/PB
NIPPONCHEMICAL
Used in harsh environments featuring immersion in solvents or corrosive chemicals, such as semiconductor manufacturing equipment. Durability and chemical resistance varies depending on operating environment. Test in your location before use.
| Standard Price: | MYR 65.17- |
|---|---|
| Days to Ship: | 5 Day(s) or more |

Polyetheretherketone/Cutting Plastic Spring PEEK/MPB
NIPPONCHEMICAL
Used in harsh environments where immersion in solvents or corrosive chemicals is performed, such as semiconductor manufacturing equipment, etc. Durability and chemical resistance varies depending on operating environment. Test in your operating environment before use.
| Standard Price: | MYR 157.66- |
|---|---|
| Days to Ship: | 28 Day(s) or more |

Polycarbonate/Plastic Spring PC/PB
NIPPONCHEMICAL
[Features]
• Disposable. Continuous operating temperature: 115 °C
• Flammability rating: UL94 V-2
• PC (polycarbonate) is a non-crystalline engineered plastic.
• Excellent impact resistance with a good balance of mechanical, electrical, and other properties. Being transparent and self-extinguishing as well, it finds use in a wide range of applications, from electrical and electronic to automotive and medical fields.
| Standard Price: | MYR 23.87- |
|---|---|
| Days to Ship: | 4 Day(s) or more |
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Free Height Hf(mm) |
| Coil I.D. ID(Ø) |
| Coil O.D. OD(Ø) |
| Height H2 at Allowable Load(mm) |
| Spring Constant(N/mm) |
| Allowable Load (Configurable Range)(N) |
| Allowable Load P2(N) |
| Material |
| Wire Dia.(Ø) |
| End Face |
| Total Number of Windings N |
| Cleaning Method |
| Type |
| Characteristics/Applications |
| Environmentally friendly |
| Brand | MISUMI | MISUMI | ACCURATE | MISUMI | MISUMI | MISUMI | KSSC | MISUMI | MISUMI | MISUMI | SHOWA SPRING | SAMINI | MISUMI | KSSC | MISUMI | SHINSEIHATUJYO | MISUMI | NIPPONCHEMICAL | SAMINI | NIPPONCHEMICAL | NIPPONCHEMICAL | NIPPONCHEMICAL | NIPPONCHEMICAL | NIPPONCHEMICAL | NIPPONCHEMICAL |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Product Series | Round Wire Coil Springs - L Dimension Configurable, O.D. Referenced Stainless Steel | D Series Compression Coil Spring (DIN 2098 Standard)【20 Pieces Per Package】 | Round Coil Springs-Fmax. (Allowable Deflection) = Lx25%-30%/O.D. Referenced | Round Coil Springs-Fmax. (Allowable Deflection) = Lx60%-75%/O.D. Referenced | Round Coil Springs-Fmax. (Allowable Deflection) = Lx40%-45%/O.D. Referenced | Compression Coil Spring, SWP-A/SUS304WP-B【5-20 Pieces Per Package】 | Round Coil Springs-Fmax. (Allowable Deflection) = Lx35%-40%/O.D. Referenced | [Clean & Pack]Round Wire Coil Springs - O.D. Referenced Stainless Steel, UL/UTT | |||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||
| Days to Ship | 1 Day(s) or more | 1 Day(s) or more | 1 Day(s) or more | 1 Day(s) or more | 1 Day(s) or more | 6 Day(s) or more | 2 Day(s) or more | 1 Day(s) or more | 1 Day(s) or more | 1 Day(s) or more | 5 Day(s) or more | 2 Day(s) or more | 4 Day(s) or more | 2 Day(s) or more | 1 Day(s) or more | 2 Day(s) or more | Quote | 8 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 8 Day(s) or more | 4 Day(s) or more | 5 Day(s) or more | 28 Day(s) or more | 4 Day(s) or more |
| Free Height Hf(mm) | 5 ~ 80 | 5 ~ 40 | 1 ~ 52.4 | 15 ~ 100 | 5 ~ 10 | 15 ~ 150 | 1 ~ 52.4 | 5 ~ 40 | 5 ~ 90 | 5 ~ 70 | 7 ~ 60 | 5 ~ 100 | 5 | 4 ~ 43 | 5 ~ 25 | 29 ~ 126 | 5 ~ 40 | 8 ~ 17.2 | 10 ~ 45 | 8 ~ 17.2 | 8 ~ 17.2 | 20 ~ 50 | 20 ~ 50 | 5 ~ 10 | 20 ~ 50 |
| Coil I.D. ID(Ø) | - | - | 0.4 ~ 8.2 | 5 ~ 16 | - | - | - | 1.7 ~ 4.7 | 2.3 ~ 24.4 | 1.4 ~ 5.2 | - | - | - | - | 2 ~ 5 | - | - | 1 ~ 7.5 | - | 1 ~ 7.5 | 1 ~ 7.5 | 4 ~ 20.5 | 2.2 ~ 20.5 | 3 ~ 7 | 4 ~ 20.5 |
| Coil O.D. OD(Ø) | 2 ~ 20 | 2 ~ 6 | 0.6 ~ 9.5 | 5.9 ~ 18.85 | 4 ~ 6 | 5 ~ 13 | 0.6 ~ 5.4 | 3 ~ 6 | 3 ~ 27 | 2 ~ 6 | 4.5 ~ 14 | 1.7 ~ 13 | 4 | 2 ~ 13 | 3 ~ 6 | 6.5 ~ 36 | 2 ~ 6 | 2 ~ 9 | 6 ~ 10 | 2 ~ 9 | 2 ~ 9 | 8 ~ 25 | 3 ~ 25 | 5 ~ 9 | 8 ~ 25 |
| Height H2 at Allowable Load(mm) | 1.25 ~ 33 | 3 ~ 24 | 0.78 ~ 21.74 | 6 ~ 40 | 3.25 ~ 7 | - | 0.7 ~ 11.9 | 3.5 ~ 30 | 1.25 ~ 36 | 2.75 ~ 38.5 | - | - | 3.75 | 1.92 ~ 19.8 | 3 ~ 15 | - | 3 ~ 24 | - | - | - | - | - | - | - | - |
| Spring Constant(N/mm) | 0.05 ~ 0.5 | 0.5 ~ 2 | 0.029 ~ 8.179 | 0.29 ~ 0.49 | 2 ~ 5.9 | - | 0.0294 ~ 8.1732 | 2.9 ~ 5.9 | 0.1 ~ 0.5 | 0.5 ~ 1 | 0.107 ~ 12.963 | 0.05 ~ 8.321 | 4.9 | 0.059 ~ 3.557 | 1.5 ~ 2.9 | - | 0.5 ~ 2 | 0.053 ~ 3.96 | 0.56 ~ 2.3 | 0.027 ~ 2.18 | 0.038 ~ 2.34 | 0.09 ~ 1.01 | 0.06 ~ 1.57 | 0.15 ~ 1.03 | 0.1 ~ 1.14 |
| Allowable Load (Configurable Range)(N) | ~1.50 / 1.51~4.50 / 4.51~8.50 / 8.51~16.00 / 16.01~30.00 | ~1.50 / 1.51~4.50 / 4.51~8.50 / 8.51~16.00 | ~1.50 / 1.51~4.50 / 4.51~8.50 / 8.51~16.00 | 1.51~4.50 / 4.51~8.50 / 8.51~16.00 / 16.01~30.00 | 1.51~4.50 / 4.51~8.50 / 8.51~16.00 | - | ~1.50 / 1.51~4.50 / 4.51~8.50 / 8.51~16.00 | 4.51~8.50 / 8.51~16.00 / 16.01~30.00 / 30.01~50.00 | ~1.50 / 1.51~4.50 / 4.51~8.50 / 8.51~16.00 / 16.01~30.00 | ~1.50 / 1.51~4.50 / 4.51~8.50 / 8.51~16.00 | 1.51~4.50 / 4.51~8.50 / 8.51~16.00 / 16.01~30.00 / 30.01~50.00 | ~1.50 / 1.51~4.50 / 4.51~8.50 / 8.51~16.00 / 16.01~30.00 / 30.01~50.00 | 4.51~8.50 | ~1.50 / 1.51~4.50 / 4.51~8.50 / 8.51~16.00 / 16.01~30.00 | 1.51~4.50 / 4.51~8.50 / 8.51~16.00 | 4.51~8.50 / 8.51~16.00 / 16.01~30.00 / 50.01~73.00 / 107.01~150.00 | ~1.50 / 1.51~4.50 / 4.51~8.50 / 8.51~16.00 | ~1.50 / 1.51~4.50 | 4.51~8.50 / 8.51~16.00 | ~1.50 / 1.51~4.50 | ~1.50 / 1.51~4.50 | 1.51~4.50 / 4.51~8.50 / 8.51~16.00 | ~1.50 / 1.51~4.50 / 4.51~8.50 / 8.51~16.00 / 16.01~30.00 | ~1.50 / 1.51~4.50 | 1.51~4.50 / 4.51~8.50 / 8.51~16.00 |
| Allowable Load P2(N) | 0.15 ~ 23.5 | 0.98 ~ 15.7 | 0.21 ~ 10.69 | 2.65 ~ 17.64 | 3.4 ~ 8.8 | - | 0.2646 ~ 8.5456 | 4.9 ~ 39.2 | 0.38 ~ 23.5 | 0.98 ~ 15.7 | 2.33 ~ 32.25 | 0.81 ~ 34.1 | 6.1 | 0.62 ~ 17.79 | 2.9 ~ 14.7 | - | 0.98 ~ 15.7 | - | 5.39 ~ 13.7 | - | - | - | - | - | - |
| Material | Stainless Steel Wire | Stainless Steel Wire | Stainless Steel Wire | Stainless Steel Wire | Stainless Steel Wire | Stainless Steel Wire / Piano Wire | Stainless Steel Wire | Piano Wire | Piano Wire | Piano Wire | Stainless Steel Wire / Piano Wire | Stainless Steel Wire / Piano Wire | Stainless Steel Wire | Stainless Steel Wire | Piano Wire | Steel Wire | Stainless Steel Wire | PEEK | Inconel | POM | Polycarbonate | POM | PEEK | PEEK | Polycarbonate |
| Wire Dia.(Ø) | 0.13 ~ 1.5 | 0.2 ~ 0.65 | 0.1 ~ 0.7 | 0.45 ~ 1.2 | 0.4 ~ 0.65 | 0.4 ~ 0.9 | 0.1 ~ 0.4 | 0.4 ~ 0.65 | 0.16 ~ 1.7 | 0.2 ~ 0.55 | 0.4 ~ 1 | 0.16 ~ 1 | 0.55 | 0.2 ~ 0.9 | 0.3 ~ 0.55 | - | 0.2 ~ 0.55 | - | 0.6 ~ 1 | - | - | - | - | - | - |
| End Face | Without Grinding | Without Grinding | Without Grinding | Without Grinding | Without Grinding | Without Grinding | Without Grinding | Without Grinding | Without Grinding | Without Grinding | Without Grinding | Without Grinding | Without Grinding | Without Grinding | Without Grinding | Without Grinding | Without Grinding | Without Grinding | Without Grinding | Without Grinding | Without Grinding | Without Grinding | Without Grinding | Without Grinding | Without Grinding |
| Total Number of Windings N | - | - | 5 ~ 20.5 | 7 ~ 31 | - | - | 5.5 ~ 20.5 | - | - | - | - | - | - | 4.5 ~ 20 | - | 11.5 ~ 18 | - | - | - | - | - | - | - | - | - |
| Cleaning Method | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Degreasing / Precision Cleaning / Electrolytic Polishing + Precision Cleaning | - | - | - | - | - | - | - | - |
| Type | Round Wire | Round Wire | - | Round Wire | Round Wire | Round Wire | - | - | - | - | - | - | Round Wire | - | - | - | Round Wire | - | - | - | - | - | - | - | - |
| Characteristics/Applications | Not applicable | Not applicable | - | Not applicable | Not applicable | Not applicable | - | - | - | - | - | - | Not applicable | - | - | - | Clean washed | - | - | - | - | - | - | - | - |
| Environmentally friendly | RoHS Compliant (10 Substances) | RoHS Compliant (10 Substances) | - | RoHS Compliant (10 Substances) | RoHS Compliant (10 Substances) | RoHS Compliant (10 Substances) | - | - | - | - | - | - | RoHS Compliant (10 Substances) | - | - | - | RoHS Compliant (10 Substances) | - | - | - | - | - | - | - | - |
Loading...
[15-150/1mm Unit(s)]
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy