(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Rollers（Length：~100）
Mounting Method
-
With Bearings -
Straight -
Set Screw -
With Keyway -
Bushing -
Shaft -
Side Screw Mounted
-
Urethane/Rubber Rollers - Straight, Crowned Type
MISUMI
roller with various resins and hardnesses to choose from. There are two types of shapes: straight type and crown type.
The material of the core metal can be selected from steel (equivalent to S45C), stainless steel (SUS304), and aluminum (aluminum alloy).
For the lining, you can specify urethane (natural color), antistatic urethane (gray), silicone rubber (light gray), heat-resistant urethane (reddish brown), or NBR (black).
Shore hardness can be selected from Shore A50 to Shore A95. Please check the outline drawing and specification table for availability.
A90/95 is ether urethane, A50/A70 is ester urethane.
It is possible to specify dimensions in 1mm increments for the L specification type, but the length that can be specified for the L dimension selection type cannot be selected.
Additional machining (MC) allows tapping holes to be machined at two locations on the outside diameter. In addition, (UDC) allows you to change the urethane to antistatic urethane.
Please refer to the specification table for the range of dimensions that can be specified.- Volume Discount
Days to Ship: 6 Day(s) or more -
MISUMI
This is a resin roller with bearings pressed into the resin. There are two types of shapes: a straight type and a double flange type.
The bearing material can be specified as steel or stainless steel.
The resin material can be selected from polyacetal (white), ultra-high molecular weight polyethylene (white), polypropylene (white), and MC nylon (blue).
The characteristics of each material are as follows.
Polyacetal: It has excellent mechanical strength.
Ultra-high molecular weight polyethylene: It has excellent abrasion resistance and complies with the Food Sanitation Act.
Polypropylene: Product has superior chemical resistance properties.
MC Nylon: Excellent mechanical strength and wear resistance.Days to Ship: 6 Day(s) or more -
Urethane/Rubber Rollers - Bearing Type
MISUMI
roller with a bearing that can be selected from various resins and hardnesses. There are two types of shapes: straight type and crown type.
The material of the core metal can be selected from steel (equivalent to S45C), stainless steel (SUS304), and aluminum (aluminum alloy).
For the lining, you can specify urethane (natural color), antistatic urethane (gray), silicone rubber (light gray), heat-resistant urethane (reddish brown), or NBR (black).
Shore hardness can be selected from Shore A50 to Shore A95. Please check the outline drawing and specification table for availability.
A90/95 is ether urethane, A50/A70 is ester urethane.
It is possible to specify dimensions in 1mm increments for the L specification type, but the length that can be specified for the L dimension selection type cannot be selected.
Additional machining (MC) allows tapping holes to be machined at two locations on the outside diameter. In addition, (UDC) allows you to change the urethane to antistatic urethane.
The bearing material can be changed to stainless steel type with additional machining (SB). Please refer to the specification table for the range of dimensions that can be specified.- Volume Discount
Days to Ship: 2 Day(s) or more -
MISUMI
Standard expansionThe total length of the roller can now be specified in 1mm increments! Please use the L dimension specified type. FeaturesA roller with a bearing that can be selected from various metals and surface treatments. There are two types of shapes: straight type and crown type.
You can choose the material from steel (equivalent to S45C), stainless steel (SUS304), or aluminum (aluminum alloy).
For the L designation type, dimensions can be specified in 1mm increments!
In addition, the bearing can be changed to a stainless steel type with additional machining (SB). Please refer to the specification table for the range of dimensions that can be specified.- Volume Discount
Standard Price: MYR 93.35- Days to Ship: 6 Day(s) or more -
Urethane Rollers - with Thread
MISUMI
This is a tapped type urethane lining roller. By using a tap, it can be easily attached to the shaft.
There are two types of shapes: straight or crown type. The material of the core metal can be selected from stainless steel (SUS304) and aluminum (aluminum alloy).
The shore hardness of urethane (natural color) can be specified as A50, A70, or A90.
A90 is ether urethane, A50/A70 is ester urethane. In addition, (UDC) allows you to change the urethane to antistatic urethane.
Please refer to the specification table for the range of dimensions that can be specified.- Volume Discount
Standard Price: MYR 116.82- Days to Ship: 6 Day(s) or more -
Polyurethane Roller With Bearing, Thickness Configurable
MISUMI
This is an economy item, The price is cheaper than the MISUMI standard product.
Days to Ship: 9 Day(s) -
Urethane, Rubber Lined Rollers - Straight Set Screw Type
MISUMI
lining roller with a set screw machined on the shaft end. There are two types of core material: SUS304 or aluminum alloy.
You can choose from three types for the lining: urethane, silicone, and heat-resistant urethane.
Urethane has excellent wear resistance and mechanical strength, and the hardness can be selected from A90, A70, and A50.
A90 is ether urethane, A50/A70 is ester urethane.
Also, it can be changed to antistatic urethane with additional machining (UDC).
Silicon has excellent chemical resistance and heat resistance. Heat-resistant urethane has excellent mechanical strength and can be used for heat-resistant applications (up to 110℃).- Volume Discount
Days to Ship: 7 Day(s) or more -
MISUMI
"Have the Aluminum Tube adopted and thus, are inexpensive."
Days to Ship: 9 Day(s) -
Urethane Kined Rollers - Straight Type with Keyway
MISUMI
A urethane roller with a keyway machined into the shaft hole that allows you to specify the length. You can choose from two types: straight type and tapped type.
In addition, it is possible to change the material to antistatic urethane through additional machining and specify the length of the roller in 1 mm increments.- Volume Discount
Days to Ship: 9 Day(s) -
Urethane Rollers with Bearing, Straight Type, Urethane Thickness Selectable
MISUMI
5mm or 10mm can be selected for the Urethane Thickness.
Days to Ship: 8 Day(s) or more -
Urethane Rollers with Shafts - Straight
MISUMI
5th business day shipping is available for Urethane Rollers with Shafts whose L dimension can be specified to up to 300mm.
Days to Ship: 8 Day(s) or more -
Groove Rollers - With Bearings
MISUMI
"Have the groove machined on the Urethane part and thus, are useful for tape feed mechanisms, etc."
Days to Ship: 9 Day(s) -
Urethane Rollers with Shafts - Urethane Thickness Configurable
MISUMI
The Urethane Thickness can be specified in the range between 2mm and 5mm.
Days to Ship: 8 Day(s) or more -
Urethane Rollers - Straight Type, Urethane Thickness Selectable
MISUMI
5mm or 10mm can be selected for the Urethane Thickness.
Days to Ship: 8 Day(s) or more -
MISUMI
Rollers excellent in O.D. tolerance and geometric tolerance. Please use them for conveyance requiring high accuracy.
Days to Ship: 8 Day(s) or more -
Urethane Rollers - with Pressed Bearings
MISUMI
This is a urethane roller with bearings glued to the urethane roller.
Since no core metal is used, it can be purchased at a low price.
[Type] Urethane roller
[Roller shape] Straight
[Urethane rubber processing] Adhesive
[Roller end specifications] With bearing
[Material] Bearing: Steel
> Urethane: Ether polyurethane (natural color)
[Hardness (shore)] A90
[Surface treatment] None- Volume Discount
Standard Price: MYR 71.66 Days to Ship: 6 Day(s) or more -
Metal Rollers - Straight, Crowned
MISUMI
Standard expansionThe total length of the roller can now be specified in 1mm increments! Please use the L dimension specified type. FeaturesA roller with a variety of metals and surface treatments available. There are two types of shapes: straight type and crown type.
You can choose the material from steel (equivalent to S45C), stainless steel (SUS304), or aluminum (aluminum alloy).
For the L designation type, dimensions can be specified in 1mm increments!
Also, with additional machining (MC), tapped holes can be machined at two locations on the outside diameter. Please refer to the specification table for the range of dimensions that can be specified. Related products[New product] Grooved roller for round belts: Multiple grooves on one roller This makes it possible to reduce the number of parts!!- Volume Discount
Standard Price: MYR 72.74- Days to Ship: 7 Day(s) -
Urethane Rollers with Shafts - Both Ends Threaded
MISUMI
5th business day shipping is available for Urethane Rollers with Shafts whose L dimension can be specified to up to 300mm.
Days to Ship: 8 Day(s) or more -
Metal Rollers - Female Thread Type
MISUMI
This is a metal roller with a tap. By using a tap, it can be easily attached to the shaft.
There are two types of shapes: straight or crown type. You can choose the material from stainless steel (SUS304) or aluminum (aluminum alloy).
Please refer to the specification table for the range of dimensions that can be specified.- Volume Discount
Standard Price: MYR 107.89- Days to Ship: 6 Day(s) or more -
MISUMI
"Have the groove machined on the Urethane part and thus, are useful for tape feed mechanisms, etc."
Days to Ship: 9 Day(s) -
![[Clean & Pack]Hollow Aluminum Rollers](//my.misumi-ec.com/linked/material/mech/MSM1/PHOTO/110311042289_001.jpg?$product_view_b$)
[Clean & Pack]Hollow Aluminum Rollers
MISUMI
Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.■Part Number for Clean & Pack Products· Degreasing (Anti-rust single packing) : Part Number SL-□□ · Precision cleaning (Degassing double packing) : Part Number SH-□□ · Electrolytic polishing + precision cleaning (Degassing double packing) : Part Number SHD-□□ Product Part Number Cleaning Method Packaging Type Effects Compared to Uncleaned Product Environment (Standard) Process SL-□□ Degreasing Anti-rust packing Oil removal General environment Regular assembly process Post battery assembly process SH-□□ Precision cleaning Degassing double packing Oil removal
Dust removalClean environment (Class 10 to 1,000) Battery assembly process LCD-related post assembly process In-vehicle camera assembly process SHD-□□ Electrolytic polishing + precision cleaning Degassing double packing Oil removal
Dust removal
Outgas reductionVacuum environment
Clean environment (Class 10 to 1,000)Pre-semiconductor process Liquid crystal deposition process Pre-OLED process ■Notes
Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.
This is an aluminum roller made of aluminum pipe. The surface treatment is clear anodizing. The outer diameter can be selected from 30, 40, 50, and 60 mm.
The outer diameter, overall length, counterbore diameter, counterbore depth, and inner diameter can be specified in 1 mm increments. Each dimensional tolerance is manufactured with medium-grade general tolerances.Days to Ship: 6 Day(s) or more
![[Clean & Pack]Hollow Aluminum Rollers](http://my.misumi-ec.com/linked/material/mech/MSM1/PHOTO/110311042289_001.jpg?$product_view_b$)
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Mounting Method |
| Environmentally Friendly |
| O.D.(mm) |
| Properties / applications |
| Roller Type |
| Material |
| Roller Shape |
| Inner Dia. d(mm) |
| Length(mm) |
| Urethane Rubber Processing |
| Cleaning Method |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI |
| Product Series | Urethane Rollers with Bearing, Straight Type, Urethane Thickness Selectable | Urethane Rollers with Shafts - Urethane Thickness Configurable | Urethane Rollers - Straight Type, Urethane Thickness Selectable | ||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Days to Ship | 6 Day(s) or more | 6 Day(s) or more | 2 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 9 Day(s) | 7 Day(s) or more | 9 Day(s) | 9 Day(s) | 8 Day(s) or more | 8 Day(s) or more | 9 Day(s) | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 6 Day(s) or more | 7 Day(s) | 8 Day(s) or more | 6 Day(s) or more | 9 Day(s) | 6 Day(s) or more |
| Mounting Method | Straight | With Bearings | With Bearings | With Bearings | Set Screw | - | Set Screw | Straight | With Keyway | With Bearings | Shaft | With Bearings | Shaft | Straight | Straight | With Bearings | Straight | Shaft | Set Screw | Straight | Straight |
| Environmentally Friendly | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | RoHS compliant (10 substances) |
| O.D.(mm) | 50 ～ 80 | 20 ～ 80 | 25 ～ 50 | 25 ～ 50 | 50 ～ 80 | 40 ～ 100 | 50 ～ 100 | 30 ～ 60 | 20 ～ 100 | 40 ～ 100 | 10 ～ 35 | 50 | - | 20 ～ 100 | 30 ～ 80 | 20 | 50 ～ 80 | 10 ～ 35 | 50 ～ 80 | 50 ～ 80 | 30 ～ 60 |
| Properties / applications | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Clean washing ～ Non-Magnetic |
| Roller Type | Urethane/Rubber Roller | Plastic Roller | Urethane/Rubber Roller / Plastic Roller | Metal Roller | Urethane/Rubber Roller | - | Urethane/Rubber Roller | Metal Roller | Urethane/Rubber Roller | Urethane/Rubber Roller | Urethane/Rubber Roller | Urethane/Rubber Roller | Urethane/Rubber Roller | Urethane/Rubber Roller | Metal Roller | Urethane/Rubber Roller | Metal Roller | Urethane/Rubber Roller | Metal Roller | Urethane/Rubber Roller | Metal Roller |
| Material | Aluminum ～ Stainless Steel | Plastic | Aluminum ～ Stainless Steel | Aluminum ～ Steel | Aluminum ～ Stainless Steel | Aluminum | Aluminum ～ Stainless Steel | Aluminum | Aluminum ～ Stainless Steel | Aluminum ～ Stainless Steel | Steel | Aluminum | Stainless Steel ～ Steel | Aluminum ～ Stainless Steel | Aluminum ～ Steel | Urethane | Aluminum ～ Steel | Steel | Aluminum ～ Stainless Steel | Aluminum ～ Stainless Steel | Aluminum |
| Roller Shape | Straight / Crowned | Straight | Straight / Crowned | Straight / Crowned | Straight / Crowned | - | Straight | Straight | Straight | Straight / Crowned | Straight | Groove | Straight | Straight | Straight | Straight | Straight / Crowned | Straight | Straight / Crowned | Groove | Straight |
| Inner Dia. d(mm) | 12 ～ 30 | 6 ～ 20 | 6 ～ 15 | 6 ～ 15 | 12 ～ 30 | - | 10 ～ 30 | 15 ～ 55 | 8 ～ 30 | 8 ～ 30 | 5 ～ 20 | - | 8 ～ 15 | 8 ～ 40 | 8 ～ 35 | - | 12 ～ 30 | - | 12 ～ 30 | 12 ～ 30 | 15 ～ 55 |
| Length(mm) | ~100 | ~100 | ~100 | ~100 | ~100 | ~100 | ~100 | ~100 | ~100 | ~100 | ~100 | ~100 | ~100 | ~100 | ~100 | ~100 | ~100 | ~100 | ~100 | ~100 | ~100 |
| Urethane Rubber Processing | Lining | - | Lining | - | Lining | - | Lining | - | Lining | Lining | Lining | Lining | Lining | Lining | - | Adhesive | - | Lining | - | Lining | - |
| Cleaning Method | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Degreasing / Precision Cleaning |
![[Clean & Pack]Hollow Aluminum Rollers](http://my.misumi-ec.com/linked/material/mech/MSM1/PHOTO/110311042289_001.jpg?$product_view_c$)
Loading...
Configure
Specification/Dimensions
-
Environmentally Friendly
-
O.D.(mm)
-
Properties / applications
-
Roller Type
- Urethane/Rubber Roller
- Metal Roller
- Plastic Roller
- Adjusting Components
-
Material
-
Roller Shape
-
Straight -
Crowned -
Groove -
Knurled
-
-
Inner Dia. d(mm)
-
Length(mm)
- ~50
- ~100
- ~300
- ~500
- ~1000
-
Urethane Rubber Processing
-
Cleaning Method
- Degreasing
- Precision Cleaning
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
Days to Ship
-
- All
- 1 Day(s) or Less
- 2 Day(s) or Less
- 4 Day(s) or Less
- 5 Day(s) or Less
- 6 Day(s) or Less
- 7 Day(s) or Less
- 8 Day(s) or Less
- 9 Day(s) or Less
- 10 Day(s) or Less
- 11 Day(s) or Less
Related Categories to Rollers
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy