(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Flat Belt Pulleys（Length L：~50）
-
Idlers for Flat Belts-Flanged Type/Crowned Type/Width L6-32
MISUMI
· Idlers type: Bearing Built-in.
· Shaft Type: one Bearing and Bearing on Each End 2 pcs.
· Type of Idlers: Flanged type and Crowned type.
· The series code of Flanged type: HBG HBGM HBGA HBGS and HBGP.
· The series code of Crowned type: HBGC HBGCM HBGCA and HBGCS.
· Material Idlers body: S45C Equivalent , Aluminum Alloy, Stainless Steel SUS304 and Polyacetal.
· Material of Bearing: Steel and Stainless Steel.
· Outer Diameter: 15 – 50 mm
· Width Thickness: 6 – 32 mm
· Idlers for Stainless Steel Belts- Crowned- Volume Discount
Days to Ship: 1 Day(s) or more -
Pulleys for Flat Belts (Width T=6 ~ 32) - Flanged, Crowned, Press-Fit Urethane
MISUMI
· Shaft of Pulleys: Flanged, Crowned, Press-Fit Urethane
· The series code of Flanged type: HBPG, HBPM, HBPA and HBPS.
· The series code of Crowned type: HBPCG, HBPCM, HBPCA and HBPCS.
· The series code of Press-Fit Urethane type: HBPUS.
· Shaft Type : Round Hole.
· Pulleys Body Material: S45C Equivalent, Aluminum Alloy and SUS304.
· Surface Treatment solution: Black Oxide, Electroless Nickel Plating, Clear Anodize and Urethane Shore A70.
· Outer Diameter: 15-100 mm.
· Shaft (Bore) Diameter: 5-40 mm.
· Width Thickness: 6-32 mm.
· VFF Engineering Plastic Flanged IdlerDays to Ship: 7 Day(s) or more -
Pulley Idler With Flange (FIP, FIPA, FIPS, FIP-SUS)
IMAO
Pulley idler with flange usable for flat belts and timing belts. Available in plastic, aluminum, steel, and SUS.
Standard Price: MYR 44.83- Days to Ship: 4 Day(s) or more -
Days to Ship: 7 Day(s) or more -
Idler Crown Roller (CTR, CTRS)
IMAO
· Idlers type: One piece bearing and Double bearing Built-in.
· Shape of Idlers: Crowned type.
· CTR: material is Glass-fiber reinforced CTR polyamide plastic color black.
· CTRS: material is Steel S45C and Steel Electroless nickel plated finish.
· Idler body material is steel and Resin.
· Bearing material: steel.
· Retaining Ring material: steel.
· Outer Diameter: 34, 43 and 48 mm.
· Thickness Diameter: 20, 25, 35 and 49 mm.
· The crown design helps keep the belt centered, preventing slipping and tracking issues.
· Pulley for Flat Belts- Crowned Type/Crosspiece Groove Straight.Standard Price: MYR 82.43- Days to Ship: 8 Day(s) or more -
Pulleys for Flat Belts (Width L=25 ~ 100) - Crowned, Crosspiece Groove Straight
MISUMI
· The Pulleys for Flat Belts ROBAC, ROBACF, and ROBAM types are specific pulleys manufactured by MISUMI.
· Shaft of Pulleys : Crowned and Crosspiece Groove Straight type.
· The series code of Crowned type: ROBAC, ROBACF.
· The series code of Crosspiece Groove type: ROBAM.
· Shaft Type : Round Hole.
· Pulleys Body Material: Aluminum Alloy.
· Surface Treatment solution: Clear Anodize
· Outer Diameter: 15-80 mm.
· Shaft (Bore) Diameter: 8-35 mm.
· Length: 25-100 mm.
· Idlers for Flat Belts (Width L25-100) -Straight Type/Crosspiece Groove Straight Type/Crowned TypeDays to Ship: 6 Day(s) or more -
Idlers for Flat Belts-Straight Type/Crosspiece Groove Straight Type/Crowned Type/Width L25-100
MISUMI
· Product type: Idlers.
· Idlers type: Bearing Built-in.
· Shape of Idlers: Straight type, Crosspiece Groove Straight Type and Crowned Type.
· Shaft Type : Bearing on Each End (2-Bearing in Total)
· The product code series Straight type: ROFAN and ROFAF.
· The product code series Crosspiece Groove Straight: ROFAM.
· The product code series Crowned Type: ROFAC.
· Idlers Material: Aluminum Alloy
· Surface Treatment solution: Clear Anodize
· Outer Diameter: 15-80 mm.
· Shaft (Bore) Diameter: 5-35 mm.
· Length: 25-100 mm.
· Pulleys for Flat Belts - Flanged, Crowned, Press-Fit UrethaneDays to Ship: 7 Day(s) or more -
Pulleys for Flat Belts with Urethane (Width L=25 ~ 100) - Crowned, Crosspiece Groove Straight
MISUMI
· Product type : Pulleys.
· Shaft of Pulleys : Crowned and Crosspiece Groove Straight type.
· The series code of Crowned type: RWCUN RWCUF RWMUN and RWMUF.
· The series code of Crosspiece Groove type: RWCGN RWCGF RWMGN and RWMGF.
· Shaft Type : Round Hole.
· Flange: Flange type and No Flange.
· Core Material: Aluminium A5052.
· Lining Material: Urethane (Natural Color)
· Urethane Hardness: Shore A90 and Shore A70.
· Outer Diameter: 15-80 mm.
· Shaft (Bore) Diameter: 8-35 mm.
· Length: 25-100 mm.
· Economy Pulleys for Flat Belts-Crowned Type/Crosspiece Groove Straight Type/Width L110-510Days to Ship: 8 Day(s) or more -
Idler Flat Belt Driven Roller (RABS)
IMAO
[Teachers]
· Usable as a following roller for flat belts.
· As the flange height is even lower than the belt thickness, transport work to the top of the roller is possible.
· Ball bearings are fixed with retainer ringsStandard Price: MYR 113.00- Days to Ship: 7 Day(s) or more -
VFF Engineering Plastic Flanged Idler
NABEYA BI-TECH
· Model: VFF
· Idlers type: One piece bearing and Double bearing Built-in.
· Material Idlers body: Glass fiber-reinforced Nylon 66
· Idlers Shape : Straight type.
· Material Bearings: steel, rubber seal.
· Outer Diameter: 40, 45, 50, 60, 65, 70 and 75 mm.
· Nominal width Diameter: 15, 20, 25, 30, 45, 50 and 65 mm.
· Shaft (Bore) Diameter: 10, 12, 15, 17 and 20 mm.
· L dimension: 50 -100 mm.
· VFF Engineering Plastic Flanged Idler VFF types is specific idlers manufactured by NBK.
· VFL Engineering Plastic Flat IdlerStandard Price: MYR 47.28- Days to Ship: 5 Day(s) or more -
![[Clean & Pack]Pulleys for Flat Belts - Width L = 25 to 100](//my.misumi-ec.com/linked/material/mech/MSM1/PHOTO/110311046519_001.jpg?$product_view_b$)
[Clean & Pack]Pulleys for Flat Belts - Width L = 25 to 100
MISUMI
Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.■ Part Number for Clean & Pack Products· Degreasing (Anti-rust single packing) : Part Number SL-□□ · Precision cleaning (degassing double packing) : Part Number SH-□□ · Electrolytic polishing + precision cleaning (degassing double packing) : Part Number SHD-□□ Product Part Number Cleaning Method Packaging Type Effects Compared to Uncleaned Product Environment (Standard) Process SL-□□ Degreasing Anti-rust packing Oil removal General environment Regular assembly process Post battery assembly process SH-□□ Precision cleaning Degassing double packing Oil removal
Dust removalClean environment (Class 10 to 1,000) Battery assembly process LCD-related post assembly process In-vehicle camera assembly process SHD-□□ Electrolytic polishing + precision cleaning Degassing double packing Oil removal
Dust removal
Outgas reductionVacuum environment
Clean environment (Class 10 to 1,000)Pre-semiconductor process Liquid crystal deposition process Pre-OLED process ■NotesSelectable from Crosspiece Groove Straight, Crowned (No Flange), and Crowned (Flanged).
Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.
Material: S45C and SUS304 have been added.
[Material]5000 Series Aluminum Alloy, S45C, SUS304
[Surface Treatment]5000 Series Aluminum Alloy (Clear Anodize), S45C (Electroless Nickel Plating)
[Type]Pulley
[Pulley Shape]Crowned (Flanged/No Flange), Crosspiece Groove Straight (No Flange)
[Pulley Width: L (mm)]25 to 100
[Shaft Bore Type] Round Hole + Tap, Keyway + Tap (New JIS)Days to Ship: 6 Day(s) or more -
NABEYA BI-TECH
● Comes with nut and spring washer.
● Material/Finish
· Body: Glass fiber-reinforced Nylon 66
Bearings: steel, rubber seal
· Nut / spring / washer: steel with trivalent chromate treatment
· Bolt: steel
· Collar: steel, black oxide coating (black)Standard Price: MYR 90.81- Days to Ship: 5 Day(s) or more -
VFL Engineering Plastic Flat Idler
NABEYA BI-TECH
· Model: VFL
· Idlers type: One piece bearing and Double bearing Built-in.
· Material Idlers body: Glass fiber-reinforced Nylon 66
· idlers Shape : Straight type.
· Material Bearings: steel, rubber seal.
· Outer Diameter: 50 and 70 mm.
· Nominal width Diameter: 30 and 55 mm.
· Shaft hole Diameter: 12 and 15 mm.
· L dimension: 50 -100 mm.
· Material: Nylon 66, also known as polyamide 66, is a type of engineering plastic known for its high strength, toughness, and wear resistance.
· Economy Pulleys for Flat Belts with Urethane-Crowned/Crosspiece Groove StraightStandard Price: MYR 57.97 Days to Ship: 7 Day(s) or more -
Idlers for Flat Belts-Width L38-90
MISUMI
· Idlers type: Bearing Built-in.
· Shape of Idlers: Straight type.
· Shaft Type : Bearing on Each End (2-Bearing in Total)
· The product code series: ROFA, ROFB, ROFM and ROFS.
· Material Idlers body: S45C Equivalent, Aluminum Alloy and Stainless Steel SUS304.
· Surface Treatment solution: Black Oxide, Electroless Nickel Plating and Clear Anodize.
· Material of Bearing: Steel and Stainless Steel.
· Outer Diameter: 20, 25, 30, 35 and 40 mm.
· Shaft (Bore) Diameter: 6, 8 and 10 mm.
· Length: 38, 45, 50, 60, 70, 85 and 90 mm.
· Pulleys for Stainless Steel Belts-Crowned- Volume Discount
Standard Price: MYR 59.40- Days to Ship: 7 Day(s) -
Pulleys for Stainless Steel Belts-Crowned
MISUMI
· Product type : Pulleys.
· Shaft of Pulleys : Crowned type.
· Shaft Type : Round Hole.
· The product code series: ROBASC
· Material of Pulleys: Aluminum Alloy.
· Surface Treatment solution: Hard Anodize Treatment (Film Hardness 300HV)
· Outer Diameter: 50, 60, 70, 75, 80 and 100 mm.
· Shaft (Bore) Diameter: 15, 20, 25, 30, 35 and 40 mm.
· Length: 40 to 160 mm.
· Shaft Hole Specifications: Round Hole + Tap and New JIS Keyway + Tap
· Pulleys for Flat Belts with Urethane - Crowned, Crosspiece Groove StraightDays to Ship: 7 Day(s) -
Idlers for Stainless Steel Belts-Crowned
MISUMI
· Idlers type: Bearing Built-in.
· Type of Idlers: Crowned type.
· Shaft Type : Round Hole.
· The product code series: ROFASC
· Material Idlers body: Aluminum Alloy.
· Surface Treatment solution: Hard Anodize Treatment (Film Hardness 300HV)
· Outer Diameter: 50, 60, 70, 75, 80 and 100 mm.
· Shaft (Bore) Diameter: 10, 12, 15, 20, 25, 30, 35 and 40 mm.
· Length: 40 to 160 mm.
· Idlers for stainless steel belts are conveyor rollers designed to work specifically with stainless steel belts, providing smooth and reliable movement.
· Idlers for Flat Belts-Width L38-90Days to Ship: 9 Day(s) -
![[Clean & Pack]Pulleys for Stainless Steel Belts](//my.misumi-ec.com/linked/material/mech/MSM1/PHOTO/110311046789_001.jpg?$product_view_b$)
[Clean & Pack]Pulleys for Stainless Steel Belts
MISUMI
Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.■ Part Number for Clean & Pack Products· Degreasing (Anti-rust single packing) : Part Number SL-□□ · Precision cleaning (degassing double packing) : Part Number SH-□□ · Electrolytic polishing + precision cleaning (degassing double packing) : Part Number SHD-□□ Product Part Number Cleaning Method Packaging Type Effects Compared to Uncleaned Product Environment (Standard) Process SL-□□ Degreasing Anti-rust packing Oil removal General environment Regular assembly process Post battery assembly process SH-□□ Precision cleaning Degassing double packing Oil removal
Dust removalClean environment (Class 10 to 1,000) Battery assembly process LCD-related post assembly process In-vehicle camera assembly process SHD-□□ Electrolytic polishing + precision cleaning Degassing double packing Oil removal
Dust removal
Outgas reductionVacuum environment
Clean environment (Class 10 to 1,000)Pre-semiconductor process Liquid crystal deposition process Pre-OLED process ■NotesCrowned pulleys dedicated for stainless steel belts. This product has a crown with adjusted height for meandering prevention.
Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.
[Material]Aluminum Alloy
[Surface Treatment]Hard Clear Anodize
[Type]Pulley
[Pulley Shape]Crowned (No Flange)
[Pulley Width: L (mm)]40 to 160
[Shaft Bore Type] Round Hole + TapDays to Ship: 6 Day(s) or more -
NABEYA BI-TECH
[Features]
· Main body is aluminum alloy, bearing is steel.
· High precision and lightweight.
· Products also manufactured to custom order.
· Contact MISUMI for more information.
· Main body and finishing: A5052, anodized.Standard Price: MYR 172.30 Days to Ship: 8 Day(s) or more -
Stainless steel flat idler_VFLS
NABEYA BI-TECH
[Features]
· All stainless steel.
· Use in combination with standard either shaft ZS (stainless steel).
· Products also manufactured to custom order.
· Contact MISUMI for more information.
· Material and finishing: Main body SUS303Standard Price: MYR 406.29- Days to Ship: 8 Day(s) or more -
NABEYA BI-TECH
[Features]
· Flat idler that can even handle heavy loads.
· Recommended for use as a set with YSB.
· Nut and washer includedStandard Price: MYR 220.55- Days to Ship: 5 Day(s) or more -
Pulley Idler (NIP, NIPA, NIPS, NIP-SUS)
IMAO
· Pulley idler to be used for flat belts and timing belts.
· NIP material is Glass-fiber reinforced polyamide plastic the color is Black.
· NIPA material is A5052 Anodized finish and color is Natural.
· NIPS material is Steel (S45C) Electroless nickel plated finish.
· NIP-SUS material is SUS303.
· Bearing material: steel and stainless steel.
· Retaining Ring material: steel and stainless steel.
· The important to note that the specific material used for pulley idlers can vary depending on the application requirements, industry standards, and manufacturer specifications.
· Idler Crown Roller (CTR, CTRS)Standard Price: MYR 70.40- Days to Ship: 4 Day(s) or more -
Idler Engineering Plastic Roller, Steel Roller (TC-RP, TC-RU)
IMAO
· Idlers type: Double bearing Built-in.
· Shape of Idlers: Straight Type.
· TC-RP: material is Glass-fiber reinforced resin plastic color black.
· TC-RU: material is Steel and Zinc Trivalent Chromate plated finish.
· Idler body material is steel or Resin.
· Outer Diameter: 30 and 40 mm.
· Roller width: 35 and 45 mm.
· Idlers Straight Type are conveyor belt rollers that have a cylindrical or straight design. These idlers provide stability and reduce friction for efficient and reliable material handling.Standard Price: MYR 278.93- Days to Ship: 7 Day(s) or more -
KONISHI
· Model code: MCF-55
· Brand: KONISHI MFG (MIYOSHI)
· Idlers type: Bearing Built-in.
· Shape of Idlers: Straight type.
· Material Idlers body: MC Nylon MC901
· Shaft Type : Bearing on Each End (2-Bearing in Total)
· Material (Bearing): Bearing steel 6004ZZ.
· Body Color: Blue
· Outer Diameter: 64 mm.
· Hole diameter: 20 mm.
· Width size: 55 mm.
· Length: 100 mm.
· MC Nylon is a type of engineering plastic known for its excellent mechanical properties, including high strength, impact resistance, and wear resistance.
· Idlers for Flat Belts-Width L100-300 mm.- CAD ：
- 2D
Standard Price: MYR 216.53 Days to Ship: 6 Day(s) or more
![[Clean & Pack]Pulleys for Flat Belts - Width L = 25 to 100](http://my.misumi-ec.com/linked/material/mech/MSM1/PHOTO/110311046519_001.jpg?$product_view_b$)
![[Clean & Pack]Pulleys for Stainless Steel Belts](http://my.misumi-ec.com/linked/material/mech/MSM1/PHOTO/110311046789_001.jpg?$product_view_b$)
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Specifications |
| Shape |
| Environmentally Friendly |
| With or w/o Flange |
| Properties / applications |
| Outer Dia. D(Ø) |
| Nominal Width T(mm) |
| Length L(mm) |
| Flange Shape |
| Type |
| Material |
| Shaft Type |
| Surface Urethane |
| Shaft (Bore) Dia. d(mm) |
| Surface Treatment |
| Shaft End Specification |
| Cleaning Method |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | MISUMI | IMAO | MISUMI | IMAO | MISUMI | MISUMI | MISUMI | IMAO | NABEYA BI-TECH | MISUMI | NABEYA BI-TECH | NABEYA BI-TECH | MISUMI | MISUMI | MISUMI | MISUMI | NABEYA BI-TECH | NABEYA BI-TECH | NABEYA BI-TECH | IMAO | IMAO | KONISHI |
| Product Series | Pulleys for Flat Belts (Width T=6 ~ 32) - Flanged, Crowned, Press-Fit Urethane | Pulleys for Flat Belts (Width L=25 ~ 100) - Crowned, Crosspiece Groove Straight | Idlers for Flat Belts-Straight Type/Crosspiece Groove Straight Type/Crowned Type/Width L25-100 | Pulleys for Flat Belts with Urethane (Width L=25 ~ 100) - Crowned, Crosspiece Groove Straight | Idler Engineering Plastic Roller, Steel Roller (TC-RP, TC-RU) | ||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||
| Days to Ship | 1 Day(s) or more | 7 Day(s) or more | 4 Day(s) or more | 7 Day(s) or more | 8 Day(s) or more | 6 Day(s) or more | 7 Day(s) or more | 8 Day(s) or more | 7 Day(s) or more | 5 Day(s) or more | 6 Day(s) or more | 5 Day(s) or more | 7 Day(s) or more | 7 Day(s) | 7 Day(s) | 9 Day(s) | 6 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 5 Day(s) or more | 4 Day(s) or more | 7 Day(s) or more | 6 Day(s) or more |
| Specifications |
| ||||||||||||||||||||||
| Shape | Straight / Crowned | Straight / Crowned | Straight | Straight / Crowned | Crowned | Crowned / V-Groove | Straight / Crowned / V-Groove | Crowned / V-Groove | Straight | Straight | Crowned / V-Groove | Straight | Straight | Straight | Crowned | Crowned | Crowned | Straight | Straight | Straight | Straight | Straight | Straight |
| Environmentally Friendly | RoHS compliant (10 substances) | - | - | - | - | - | - | - | - | - | RoHS compliant (10 substances) | - | - | - | - | - | RoHS compliant (10 substances) | - | - | - | - | - | - |
| With or w/o Flange | Flange / No Flange | Flange / No Flange | No Flange | Flange / No Flange | No Flange | Flange / No Flange | Flange / No Flange | Flange / No Flange | No Flange | Flange | Flange / No Flange | Flange | No Flange | No Flange | No Flange | No Flange | No Flange | No Flange | No Flange | No Flange | No Flange | No Flange | No Flange |
| Properties / applications | Corrosion resistance / chemical resistance ～ Low Dust Generation | - | - | - | - | - | - | - | - | - | Clean washing ～ Non-Magnetic | - | - | - | - | - | Clean washing ～ Non-Magnetic | - | - | - | - | - | - |
| Outer Dia. D(Ø) | 15 ～ 50 | 15 ～ 100 | 25 ～ 75 | 15 ～ 100 | 34 ～ 73 | 15 ～ 80 | 15 ～ 80 | 15 ～ 80 | 30 ～ 60 | 40 ～ 75 | 15 ～ 80 | 45 ～ 50 | 50 | 20 ～ 40 | 50 ～ 100 | 50 ～ 100 | 50 ～ 100 | 40 | 30 ～ 50 | 30 ～ 40 | 24 ～ 73 | 30 ～ 40 | 64 |
| Nominal Width T(mm) | 6 ～ 32 | 6 ～ 32 | 7.5 ～ 44 | 6 ～ 32 | 20 ～ 49 | - | - | - | 11 ～ 41 | 15 ～ 34.5 | - | 20 ～ 30 | - | - | - | - | - | - | - | - | 12 ～ 49 | 35 ～ 45 | 30 |
| Length L(mm) | ~50 | ~50 | ~50 | ~50 | ~50 | ~50 | ~50 | ~50 | ~50 | ~50 | ~50 | ~50 | ~50 | ~50 | ~50 | ~50 | ~50 | ~50 | ~50 | ~50 | ~50 | ~50 | ~50 |
| Flange Shape | Standard | Standard | Standard | Standard | - | - | - | - | Standard | Standard | Standard | Standard | - | - | - | - | - | - | - | - | - | - | - |
| Type | Idlers (Bearing Built-in) | Pulleys | Idlers (Bearing Built-in) | Pulleys | Idlers (Bearing Built-in) | Pulleys | Idlers (Bearing Built-in) | Pulleys | Idlers (Bearing Built-in) | Idlers (Bearing Built-in) | Pulleys | Idlers (Bearing Built-in) | Idlers (Bearing Built-in) | Idlers (Bearing Built-in) | Pulleys | Idlers (Bearing Built-in) | Pulleys | Idlers (Bearing Built-in) | Idlers (Bearing Built-in) | Idlers (Bearing Built-in) | Idlers (Bearing Built-in) | Idlers (Bearing Built-in) | Idlers (Bearing Built-in) |
| Material | Steel / Aluminum / Stainless Steel / Plastic | Steel / Aluminum / Stainless Steel | Steel / Plastic | Steel / Aluminum / Stainless Steel | Steel / Plastic | Aluminum | Aluminum | Aluminum | Steel | Plastic | Aluminum | Plastic | Plastic | Steel / Aluminum / Stainless Steel | Aluminum | Aluminum | Aluminum | Aluminum | Stainless Steel | Aluminum | Steel / Plastic | Steel / Plastic | Plastic |
| Shaft Type | 1-Bearing / 1-Bearing on Each End (2-Bearing in Total) | Round Hole | 1-Bearing / 2-Bearing at Center | Round Hole | 1-Bearing / 2-Bearing at Center | Round Hole | 1-Bearing on Each End (2-Bearing in Total) | Round Hole | 1-Bearing / 2-Bearing at Center | 1-Bearing / 2-Bearing at Center | Round Hole | 1-Bearing / 2-Bearing at Center / With Shaft | 1-Bearing | 1-Bearing on Each End (2-Bearing in Total) | Round Hole | Round Hole | Round Hole | Round Hole / 1-Bearing | Round Hole / 1-Bearing | Round Hole / 1-Bearing on Each End (2-Bearing in Total) / With Shaft | 1-Bearing / 2-Bearing at Center | With Shaft | 1-Bearing |
| Surface Urethane | Urethane Not Provided | Urethane Provided / Urethane Not Provided | Urethane Not Provided | Urethane Provided / Urethane Not Provided | Urethane Not Provided | Urethane Not Provided | Urethane Not Provided | Urethane Provided | Urethane Not Provided | Urethane Not Provided | Urethane Not Provided | Urethane Not Provided | Urethane Not Provided | Urethane Not Provided | Urethane Not Provided | Urethane Not Provided | Urethane Not Provided | Urethane Not Provided | Urethane Not Provided | Urethane Not Provided | Urethane Not Provided | Urethane Not Provided | Urethane Not Provided |
| Shaft (Bore) Dia. d(mm) | 4 ～ 12 | - | 6 ～ 15 | 5 ～ 40 | 10 ～ 15 | 8 ～ 35 | 5 ～ 35 | 8 ～ 35 | 8 ～ 12 | 10 ～ 20 | 8 ～ 35 | - | 12 | 6 ～ 10 | 15 ～ 40 | 10 ～ 40 | 15 ～ 40 | 10 | 10 ～ 12 | - | 6 ～ 15 | 8 ～ 10 | 20 |
| Surface Treatment | Not Provided / Black Oxide / Electroless Nickel Plating / Clear Anodize | Not Provided / Black Oxide / Electroless Nickel Plating / Clear Anodize | Not Provided / Electroless Nickel Plating | Not Provided / Black Oxide / Electroless Nickel Plating / Clear Anodize | Not Provided / Electroless Nickel Plating | Clear Anodize | Clear Anodize | Not Provided | Electroless Nickel Plating | Not Provided | Clear Anodize | Not Provided | Not Provided | Not Provided / Black Oxide / Electroless Nickel Plating / Clear Anodize | Hard Clear Anodize | Hard Clear Anodize | Hard Clear Anodize | Clear Anodize | Not Provided | Clear Anodize | Not Provided / Electroless Nickel Plating | Not Provided / Zinc Trivalent Chromate | Not Provided |
| Shaft End Specification | Not Provided | - | - | - | - | Tap / Keyway + Tap | - | Tap | - | Not Provided | Tap / Keyway + Tap | - | Not Provided | - | Tap / Keyway + Tap | - | Tap / Keyway + Tap | Not Provided | Not Provided | - | - | - | - |
| Cleaning Method | - | - | - | - | - | - | - | - | - | - | Degreasing / Precision Cleaning | - | - | - | - | - | Degreasing / Precision Cleaning | - | - | - | - | - | - |
![[Clean & Pack]Pulleys for Flat Belts - Width L = 25 to 100](http://my.misumi-ec.com/linked/material/mech/MSM1/PHOTO/110311046519_001.jpg?$product_view_c$)
![[Clean & Pack]Pulleys for Stainless Steel Belts](http://my.misumi-ec.com/linked/material/mech/MSM1/PHOTO/110311046789_001.jpg?$product_view_c$)
Loading...
Configure
Specification/Dimensions
-
Shape
-
Straight -
Crowned -
V-Groove
-
-
Environmentally Friendly
-
With or w/o Flange
-
Flange -
No Flange
-
-
Properties / applications
-
Outer Dia. D(Ø)
-
Nominal Width T(mm)
-
Length L(mm)
- ~50
- ~100
- ~300
- ~500
-
Flange Shape
-
Type
- Idlers (Bearing Built-in)
- Pulleys
-
Material
- Steel
- Aluminum
- Stainless Steel
- Plastic
-
Shaft Type
-
Round Hole -
1-Bearing -
2-Bearing at Center -
1-Bearing on Each End (2-Bearing in Total) -
With Shaft
-
-
Surface Urethane
-
Shaft (Bore) Dia. d(mm)
-
Surface Treatment
-
Shaft End Specification
-
Cleaning Method
- Degreasing
- Precision Cleaning
- Electrolytic polishing + precision cleaning
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
Related Categories to Flat Belt Pulleys
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy