(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Keyless Bushing (Fastening Fittings)（Allowable Torque Range：150.1~200.0）
[What is a keyless bushing (fastening fitting)?]
A keyless bushing is a fastener that can fix shafts and hubs (gear, sprocket, pulley, etc.) without key grooving. By tightening the bolt, drag and friction force are generated in the tapered fitting part, causing it to fasten by the resultant force.
| Days to Ship |
|
|---|
-
- Recommendation
Standard Price: MYR 42.56 Days to Ship: 1 Day(s) -
MechaLock - Standard (Centering Function)
MISUMI
It comes in a wide variety of sizes, materials, and surface treatments, and has a centering function.
- Volume Discount
Standard Price: MYR 302.42- Days to Ship: 1 Day(s) or more -
MechaLock - Compact (Centering Function)
MISUMI
[Features]It has a centering function and is suitable for a smaller hub.
- Volume Discount
Standard Price: MYR 579.70- Days to Ship: 5 Day(s) or more -
Standard Price: MYR 37.14- Days to Ship: 6 Day(s) -
Mechalock MC Series Aluminum Type
ISEL
· 22 models from φ4 to φ35 shaft diameter available as standard
· Supports aluminum timing pulleys (steel is also usable)
· Reduced number of bolts shortens attachment/detachment time
· With a spigot joint on the back, it can also be used as a bearing retainer
· With low surface pressure, it is also ideal for hollow shaftsStandard Price: MYR 256.64 Days to Ship: 4 Day(s) or more -
Keyless Bushing A.P.LOCK SAPA Series
SUNGIL
[Features]
·Aluminum material
At High-Speed Servo Control Positioning, The Moment of Inertia Reduction is an important factor in system performance. The Use of Aluminum A.P.Lock suitable for aluminum pulley enables high-speed use with low inertia.
·High torque transmission
Because it uses high-rigidity aluminum alloy to transmit high torque, it can be used not only for aluminum pulleys but also for general steel pulleys.
·Ideal for clean rooms
Electroless nickel plated bolts and aluminum body are used as standard , making it ideal for clean rooms.Standard Price: MYR 162.06 Days to Ship: 13 Day(s) or more -
Mechanical MKN Rust-proof Nut Tightening Type - Electroless Nickel Plating Specifications
ISEL
Nut tightening shortens tightening time. Electroless nickel plated product.
Standard Price: MYR 564.34 Days to Ship: 8 Day(s) -
MechaLock - Easy Mounting (Nut)
MISUMI
[Features]It can be easily installed by simply tightening 1 nut.
- Volume Discount
Standard Price: MYR 187.91- Days to Ship: 4 Day(s) or more -
![[Clean & Pack]MechaLock - Compact](//content.misumi-ec.com/image/upload/t_product_view_b/v1/p/jp/product/series/110310858959/110310858959_001_20230911105917.jpg?$product_view_b$)
[Clean & Pack]MechaLock - Compact
MISUMI
Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.■Part Number for Clean & Pack Products· Degreasing (Anti-rust single packing) : Part Number SL-□□ · Precision cleaning (Degassing double packing) : Part Number SH-□□ · Electrolytic polishing + precision cleaning (Degassing double packing) : Part Number SHD-□□ Product Part Number Cleaning Method Packaging Type Effects Compared to Uncleaned Product Environment (Standard) Process SL-□□ Degreasing Anti-Rust Packing Oil removal General Environment Regular assembly process Post battery assembly process SH-□□ Precision Cleaning Degassing Double Packing Oil removal
Dust removalClean environment (Class 10 to 1,000) Battery assembly process LCD-related post assembly process In-vehicle camera assembly process SHD-□□ Electrolytic polishing + precision cleaning Degassing Double Packing Oil removal
Dust removal
Outgas reductionVacuum environment
Clean environment (Class 10 to 1,000)Pre-semiconductor process Liquid crystal deposition process Pre-OLED process ■Notes
Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.[Features]Is provided with the Centering function and is suitable for combination use with small-sized hubs.
- Volume Discount
Standard Price: MYR 558.90- Days to Ship: 6 Day(s) or more -
![[Clean & Pack]MechaLock - Standard](//content.misumi-ec.com/image/upload/t_product_view_b/v1/p/jp/product/series/110310859229/110310859229_001_20230911105917.jpg?$product_view_b$)
[Clean & Pack]MechaLock - Standard
MISUMI
Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.■Part Number for Clean & Pack Products· Degreasing (Anti-rust single packing) : Part Number SL-□□ · Precision cleaning (Degassing double packing) : Part Number SH-□□ · Electrolytic polishing + precision cleaning (Degassing double packing) : Part Number SHD-□□ Product Part Number Cleaning Method Packaging Type Effects Compared to Uncleaned Product Environment (Standard) Process SL-□□ Degreasing Anti-Rust Packing Oil removal General Environment Regular assembly process Post battery assembly process SH-□□ Precision Cleaning Degassing Double Packing Oil removal
Dust removalClean environment (Class 10 to 1,000) Battery assembly process LCD-related post assembly process In-vehicle camera assembly process SHD-□□ Electrolytic polishing + precision cleaning Degassing Double Packing Oil removal
Dust removal
Outgas reductionVacuum environment
Clean environment (Class 10 to 1,000)Pre-semiconductor process Liquid crystal deposition process Pre-OLED process ■Notes
Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.- Volume Discount
Standard Price: MYR 569.84- Days to Ship: 6 Day(s) or more -
Mechanical Lock MKA Rust-proof Standard Electroless Nickel Plating Specifications
ISEL
Centering function suppresses outer circumference and terminal surface run-out. Electroless nickel plated product.
Standard Price: MYR 364.62 Days to Ship: 1 Day(s) -
Standard Price: MYR 224.14 Days to Ship: 4 Day(s) or more -
Mechanical Lock MSA Rust-proof Standard Stainless Steel Specifications
ISEL
Centering function suppresses outer circumference and terminal surface run-out. Stainless steel specifications.
Standard Price: MYR 586.63 Days to Ship: 4 Day(s) or more -
MIKI PULLEY
Shaft and mounting parts have a large allowable dimensions clearance, and can be easily aligned and positioned.
Standard Price: MYR 706.89- Days to Ship: 9 Day(s) or more -
KanaLock (Cost-Effective Product) Model KPL300
KATAYAMA CHAIN
[Features]
・ The KPL300 type requires very little mounting space in the radial direction, and the number of built-in KanaLocks can be selected up to 4. It is also possible to transmit a large torque.
・ The mating of the boss hole and the shaft is up to H8/h8Standard Price: MYR 31.47- Days to Ship: 5 Day(s) or more -
Keyless Bushing A.P.LOCK SAPL-AK Series
SUNGIL
[Features]
·Self-centering function: Prevents minute off-centering.
·The diameter difference between the inner diameter (d) and the outer diameter (D) is small, and the low surface pressure makes it possible to install even small hubs.
·Standardized inner diameter ⌀4.5 to ⌀40.
·Simple in concept and easy to assemble.
·Stainless steel (vacuum environment) or electroless nickel plating (corrosion prevention) products can be selected depending on the operating environment.Standard Price: MYR 159.24 Days to Ship: 13 Day(s) or more -
Keyless Bushing A.P.LOCK SAPL-AS Series
SUNGIL
[Features]
·Self-centering function: Prevents minute off-centering.
·The diameter difference between the inner diameter (d) and the outer diameter (D) is small, and the low surface pressure makes it possible to install even small hubs.
·Standardized inner diameter from ⌀4.5 to ⌀40.
·Simple in concept and easy to assemble.
·Stainless steel material (vacuum environment) or electroless nickel plating (corrosion prevention) can be selected depending on the usage environment.- CAD ：
- 2D
Standard Price: MYR 472.14 Days to Ship: 9 Day(s) or more -
Keyless bushing A.P.LOCK SAPL-CS Series
SUNGIL
[Features]
· Self-centering Capability: Minimal Off-centering Prevention.
・The difference in diameter between the inner diameter (d) and the outer diameter (D) is small, so that it can be mounted on a small hub with low surface pressure. (A.P. Lock of the most compact design)
·Suitable for Short Hubs.
·Since the inner ring is in close contact with the hub section, the hub does not move during tightening.
·Stainless Steel or Electroless Nickel plated products can be selected depending on the environment.- CAD ：
- 2D
Standard Price: MYR 582.21- Days to Ship: 9 Day(s) or more
![[Clean & Pack]MechaLock - Compact](http://content.misumi-ec.com/image/upload/t_product_view_b/v1/p/jp/product/series/110310858959/110310858959_001_20230911105917.jpg?$product_view_b$)
![[Clean & Pack]MechaLock - Standard](http://content.misumi-ec.com/image/upload/t_product_view_b/v1/p/jp/product/series/110310859229/110310859229_001_20230911105917.jpg?$product_view_b$)
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Specifications |
| Type |
| Shaft Bore Dia. d(Ø) |
| Hub Dia.(Ø) |
| Body Material |
| Allowable Torque Range(N•m) |
| Centering |
| Surface Treatment |
| Tightening Structure |
| Tightening Method |
| Allowable Torque(N•m) |
| Cleaning Method |
| Characteristics/Applications |
| Environmentally friendly |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | MISUMI | MISUMI | MISUMI | ISEL | SUNGIL | ISEL | MISUMI | MISUMI | MISUMI | ISEL | ISEL | ISEL | MIKI PULLEY | KATAYAMA CHAIN | SUNGIL | SUNGIL | SUNGIL |
| Product Series | Keyless Bushings(Mechanical Lock), Straight With Centering Function | Mechanical MKN Rust-proof Nut Tightening Type - Electroless Nickel Plating Specifications | Mechanical Lock MKA Rust-proof Standard Electroless Nickel Plating Specifications | Mechanical Lock MSA Rust-proof Standard Stainless Steel Specifications | ||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Days to Ship | 1 Day(s) | 1 Day(s) or more | 5 Day(s) or more | 6 Day(s) | 4 Day(s) or more | 13 Day(s) or more | 8 Day(s) | 4 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 1 Day(s) | 4 Day(s) or more | 4 Day(s) or more | 9 Day(s) or more | 5 Day(s) or more | 13 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more |
| Specifications |
|
| ||||||||||||||||
| Type | Flanged | Flanged | Thin Wall | Direct Mounting | Flanged | Flanged | Nut Tightening | Nut Tightening | Thin Wall | Flanged | Flanged | Nut Tightening | Flanged | Flanged | Sleeve | Flanged | Flanged | Thin Wall |
| Shaft Bore Dia. d(Ø) | 19 | 20 ～ 25 | 28 ～ 32 | 20 ～ 25 | 30 | 20 | 17 | 17 ～ 22 | 28 ～ 32 | 25 | 20 | 17 | 25 | 22 ～ 25 | 38 ～ 40 | 20 | 25 | 28 ～ 30 |
| Hub Dia.(Ø) | 33 | 38 ～ 43 | 39 ～ 43 | 30 ～ 36 | 50 | 38 | 26 | 26 ～ 32 | 39 ～ 43 | 43 | 38 | 26 | 43 | 32 ～ 34 | - | 38 | 43 | 39 ～ 41 |
| Body Material | - | Steel / Stainless Steel | Stainless Steel | - | Aluminum | Aluminum | Steel | Steel | Stainless Steel | Stainless Steel | Steel | Steel | Stainless Steel | Stainless Steel | Steel | Steel | Stainless Steel | Stainless Steel |
| Allowable Torque Range(N•m) | 150.1~200.0 | 150.1~200.0 | 150.1~200.0 | 150.1~200.0 | 150.1~200.0 | 150.1~200.0 | 150.1~200.0 | 150.1~200.0 | 150.1~200.0 | 150.1~200.0 | 150.1~200.0 | 150.1~200.0 | 150.1~200.0 | 150.1~200.0 | 150.1~200.0 | 150.1~200.0 | 150.1~200.0 | 150.1~200.0 |
| Centering | Provided | Provided | Provided | None | Provided | None | Provided | None | Provided | Provided | Provided | Provided | Provided | - | None | Provided | Provided | Provided |
| Surface Treatment | None | None / Electroless Nickel Plating | None | None | Anodize | Anodize | Electroless Nickel Plating | None / Black Oxide / Electroless Nickel Plating | None | None | Electroless Nickel Plating | None | None | None | None | Electroless Nickel Plating | None | None |
| Tightening Structure | Single Cone Type | Single Cone Type | Single Cone Type | Single Cone Type | Single Cone Type | Single Cone Type | Tapered Sleeve Type | Tapered Sleeve Type | Single Cone Type | Single Cone Type | Single Cone Type | Tapered Sleeve Type | Single Cone Type | Single Cone Type | Tapered Sleeve Type | Single Cone Type | Single Cone Type | Single Cone Type |
| Tightening Method | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) |
| Allowable Torque(N•m) | 164 | 153 ～ 183 | 157 ～ 180 | 150 ～ 187 | 180 | 176 | 186 | 172 ～ 193 | 157 ～ 180 | 153 | 183 | 186 | 153 | 168 ～ 192 | 167 ～ 198 | 183 | 153 | 157 ～ 168 |
| Cleaning Method | - | - | - | - | - | - | - | - | Degreasing / Precision Cleaning | Degreasing / Precision Cleaning | - | - | - | - | - | - | - | - |
| Characteristics/Applications | - | - | - | - | - | - | - | - | Clean washed | Clean washed | - | - | - | - | - | - | - | - |
| Environmentally friendly | - | - | - | - | - | - | - | - | RoHS Compliant (10 Substances) | RoHS Compliant (10 Substances) | - | - | - | - | - | - | - | - |
![[Clean & Pack]MechaLock - Compact](http://content.misumi-ec.com/image/upload/t_product_view_c/v1/p/jp/product/series/110310858959/110310858959_001_20230911105917.jpg?$product_view_c$)
![[Clean & Pack]MechaLock - Standard](http://content.misumi-ec.com/image/upload/t_product_view_c/v1/p/jp/product/series/110310859229/110310859229_001_20230911105917.jpg?$product_view_c$)
Loading...
Configure
Specification/Dimensions
-
Type
-
Flanged -
Straight -
Nut Tightening -
Thin Wall -
Direct Mounting -
Sleeve
-
-
Shaft Bore Dia. d(Ø)
-
Hub Dia.(Ø)
-
Body Material
- Steel
- Stainless Steel
- Aluminum
-
Allowable Torque Range(N•m)
-
Centering
- Provided
- None
-
Surface Treatment
- None
- Black Oxide
- Electroless Nickel Plating
- Anodize
-
Tightening Structure
-
Tightening Method
-
Allowable Torque(N•m)
-
Cleaning Method
- Degreasing
- Precision Cleaning
-
Characteristics/Applications
- Clean washed
-
Environmentally friendly
- RoHS Compliant (10 Substances)
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
Related Categories to Keyless Bushing (Fastening Fittings)
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy