(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Timing Pulleys, Idlers（Type：Idler with Teeth）
Take advantage of the convenience of FREE SHIPPING and NO MINIMUM ORDER on Timing pulleys and Idlers. Should you have any doubts or require assistance in choosing the right product, our experts are readily available to provide advice and guidance.
Type
-
Timing Pulley -
Bar-Shaped Timing Pulley -
Keyless Pulley -
Idler with Teeth -
Idler -
Flange
-
- Economy
MISUMI
This is an economy item, The price is cheaper than the MISUMI standard product.
- Volume Discount
Standard Price: MYR 70.46- Days to Ship: 7 Day(s) -
MISUMI
Idlers S5M
Idlers for timing pulleys are an economy item, The price is cheaper than the MISUMI standard product.They offer a wide variety of sizes to choose from.
[Feature]
● Belt Width Used (mm.) : 4, 6, 10, 15, 20 and 25
● Belt Width Used (Inch.) : 0.19, 0.25, 0.31, 0.37, 0.5, 0.75 and 1
● Bearing Position : Central Single Bearing and Both Sides Bearing
● Shaped : With or without flanged
● Material :
Body and Flange : Aluminum Alloy
Bearing : Steel
● Surface treatment : Clear Anodized
[Application]
Idlers for timing pulleys are used to maintain proper tension and alignment in timing belt systems- Volume Discount
- RoHS
Standard Price: MYR 45.05- Days to Ship: 1 Day(s) or more -
MISUMI
Idlers T5
Idlers for timing pulleys are an economy item, The price is cheaper than the MISUMI standard product.They offer a wide variety of sizes to choose from.
[Feature]
● Belt Width Used (mm.) : 10, 15, 20 and 25
● Number of Teeth Minimum/Maximum : 18 to 30
● Applicable with Belt Type : T5
● Bearing Position : Central Bearing (Single/Double) and Both Sides Bearing
● Material :
Body and Flange : Aluminum Alloy
● Surface treatment : Clear Anodized
[Application]
Idlers for timing pulleys are used to maintain proper tension and alignment in timing belt systems- Volume Discount
- RoHS
Standard Price: MYR 44.51- Days to Ship: 1 Day(s) or more -
MISUMI
Idlers S3M
Idlers for timing pulleys are an economy item, The price is cheaper than the MISUMI standard product.They offer a wide variety of sizes to choose from.
[Feature]
● Belt Width Used (mm.) : 6, 10, and 15
● Number of Teeth Minimum/Maximum : 20 to 48
● Applicable with Belt Type : S3M
● Shaft Bore Diameter (mm.) : 3, 4 ,5 ,6 ,8 and 10
● Bearing Position : Central Bearing (Single/Double) and Both Sides Bearing
● Material :
Body and Flange : Aluminum Alloy
● Surface treatment : Clear Anodized
[Application]
Idlers for timing pulleys are used to maintain proper tension and alignment in timing belt systems- Volume Discount
- RoHS
Standard Price: MYR 38.64- Days to Ship: 1 Day(s) or more -
Flanged Idlers with Teeth - T5, T10 - Both Sides Bearing
MISUMI
It can be used for timing belt tension adjustment and driven pulley.
[Material]
· Pulley: Aluminum alloy
· Flange: Aluminum alloy
· Bearing: Steel
[Surface treatment]
· Clear anodize, hard clear anodize (firm hardness 300HV~)- Volume Discount
Standard Price: MYR 117.60- Days to Ship: 2 Day(s) or more -
Flanged Idlers with Teeth - S5M, S8M - Center Bearing
MISUMI
It can be used for timing belt tension adjustment and driven pulley.
[Material]
· Pulley: Aluminum alloy, extra super duralumin aluminum alloy, S45C equivalent, SUS304
· Flange: Aluminum alloy, S45C equivalent, SUS304
· Bearing: Steel, stainless steel- Volume Discount
Standard Price: MYR 87.28- Days to Ship: 1 Day(s) or more -
Flanged Idlers with Teeth - S5M, S8M, S14M - Both Sides Bearing
MISUMI
It can be used for timing belt tension adjustment and driven pulley.
[Material]
· Pulley: Aluminum alloy, extra super duralumin aluminum alloy, S45C equivalent
· Flange: Aluminum alloy, S45C equivalent
· Bearing: Steel
[Surface treatment]
· Clear anodize, hard clear anodize (firm hardness 300HV~), electroless nickel plating, black oxide- Volume Discount
Standard Price: MYR 144.26- Days to Ship: 2 Day(s) or more -
MISUMI
Idlers HTD 5M
Idlers for timing pulleys are an economy item, The price is cheaper than the MISUMI standard product.They offer a wide variety of sizes to choose from.
[Feature]
● Belt Width Used (mm.) : 9, and 15
● Applicable with Belt Type : 5M
● Number of Teeth : 20, 25, 26, 30, and 32
● Shaft Bore Diameter (mm.) : 8 ,10 , and 12
● Bearing Position : Central Bearing (Single/Double) and Both Sides Bearing
● Material :
Body and Flange : Aluminum Alloy
Bearing : Steel
● Surface treatment : Clear Anodized
[Application]
Idlers for timing pulleys are used to maintain proper tension and alignment in timing belt systems- Volume Discount
- RoHS
Standard Price: MYR 47.66- Days to Ship: 5 Day(s) or more -
MISUMI
Economy series products, please order more than 2 pcs.
- Volume Discount
- RoHS
Standard Price: MYR 58.32- Days to Ship: 14 Day(s) or more -
Standard Price: MYR 53.58- Days to Ship: 1 Day(s) or more -
- Economy
MISUMI
This is an economy item, The price is cheaper than the MISUMI standard product.
- Volume Discount
Standard Price: MYR 63.22- Days to Ship: 7 Day(s) -
Flanged Idlers with Teeth - S2M, S3M - Both Sides Bearing
MISUMI
It can be used for timing belt tension adjustment and driven pulley.
[Material]
· Pulley: Aluminum alloy
· Flange: Aluminum alloy
· Bearing: Steel
[Surface treatment]
· Clear anodize, hard clear anodize (firm hardness 300HV~), electroless nickel plating- Volume Discount
Standard Price: MYR 81.23- Days to Ship: 1 Day(s) or more -
- Economy
MISUMI
This is an economy item, The price is cheaper than the MISUMI standard product.
- Volume Discount
Standard Price: MYR 50.90- Days to Ship: 7 Day(s) -
- Economy
MISUMI
This is an economy item, The price is cheaper than the MISUMI standard product.
- Volume Discount
Standard Price: MYR 40.39- Days to Ship: 7 Day(s) -
Flanged Idlers with Teeth - 2GT, 3GT, 5GT, 8YU - Both Sides Bearing
MISUMI
It can be used for timing belt tension adjustment and driven pulley.
[Material]
· Pulley: Aluminum alloy, S45C equivalent
· Flange: Aluminum alloy, SPCC
· Bearing: Steel
[Surface treatment]
· Clear anodize, black oxideStandard Price: MYR 92.13- Days to Ship: 6 Day(s) or more -
MISUMI
Idlers T10
Idlers for timing pulleys are an economy item, The price is cheaper than the MISUMI standard product.They offer a wide variety of sizes to choose from.
[Feature]
● Belt Width Used (mm.) : 20, 25, 40 and 50
● Number of Teeth : 16, 20 and 26
● Applicable with Belt Type : T10
● Shaft Bore Diameter (mm.) : 15 and 20
● Bearing Position : Central Bearing (Single/Double) and Both Sides Bearing
● Material :
Body and Flange : Aluminum Alloy
● Surface treatment : Clear Anodized
[Application]
Idlers for timing pulleys are used to maintain proper tension and alignment in timing belt systems- Volume Discount
- RoHS
Standard Price: MYR 73.31- Days to Ship: 1 Day(s) -
Standard Price: MYR 32.00- Days to Ship: 1 Day(s) or more -
- Economy
MISUMI
This is an economy item, The price is cheaper than the MISUMI standard product.
- Volume Discount
Standard Price: MYR 52.19- Days to Ship: 7 Day(s) -
- Economy
MISUMI
This is an economy item, The price is cheaper than the MISUMI standard product.
- Volume Discount
Standard Price: MYR 55.75- Days to Ship: 7 Day(s) -
- Economy
MISUMI
This is an economy item, The price is cheaper than the MISUMI standard product.
- Volume Discount
Standard Price: MYR 82.70- Days to Ship: 7 Day(s) -
Flanged Idlers with Teeth - S2M, S3M - Center Bearing
MISUMI
It can be used for timing belt tension adjustment and driven pulley.
[Material]
· Pulley: Aluminum alloy, SUS304
· Flange: Aluminum alloy, SUS304
· Bearing: Steel, stainless steel
[Surface treatment]
· Clear anodize, electroless nickel plating- Volume Discount
Standard Price: MYR 83.65- Days to Ship: 2 Day(s) or more -
MISUMI
Idlers XL
Idlers for timing pulleys are an economy item, The price is cheaper than the MISUMI standard product.They offer a wide variety of sizes to choose from.
[Feature]
● Belt Width Used (mm.) : 6.4, 9.5 and 12.7
● Belt Width Used (Inch.) : 0.25, 0.37 and 0.5
● Number of Teeth : 16, 18, 20 and 22
● Shaft Bore Diameter (mm.) : 5 ,6 and 8
● Bearing Position : Central Single Bearing and Both Sides Bearing
● Material :
Body and Flange : Aluminum Alloy
● Surface treatment : Clear Anodized
[Application]
Idlers for timing pulleys are used to maintain proper tension and alignment in timing belt systems- Volume Discount
- RoHS
Standard Price: MYR 37.09- Days to Ship: 1 Day(s) or more -
MISUMI
Economy series products, please order more than 2 pcs.
- Volume Discount
- RoHS
Standard Price: MYR 42.01- Days to Ship: 5 Day(s) or more -
Flanged Idlers with Teeth - AT5, AT10 - Both Sides Bearing
MISUMI
It can be used for timing belt tension adjustment and driven pulley.
[Material]
· Pulley: Aluminum alloy
· Flange: Aluminum alloy
· Bearing: Steel
[Surface treatment]
· Clear anodize, hard clear anodize (firm hardness 300HV~)- Volume Discount
Standard Price: MYR 117.60- Days to Ship: 7 Day(s) or more -
- Economy
MISUMI
This is an economy item, The price is cheaper than the MISUMI standard product.
- Volume Discount
Standard Price: MYR 40.99- Days to Ship: 7 Day(s) -
Flanged Idlers with Teeth - L, H - Both Sides Bearing
MISUMI
It can be used for timing belt tension adjustment and driven pulley.
[Material]
· Pulley: Extra super duralumin aluminum alloy, S45C equivalent
· Flange: Aluminum alloy, SPCC
· Bearing: Steel
[Surface treatment]
· Clear anodize, electroless nickel plating, black oxide- Volume Discount
Standard Price: MYR 179.01- Days to Ship: 7 Day(s) or more -
Flanged Idlers with Teeth - AT5, AT10 - Center Bearing
MISUMI
It can be used for timing belt tension adjustment and driven pulley.
[Material]
· Pulley: Aluminum alloy
· Flange: Aluminum alloy
· Bearing: Steel
[Surface treatment]
· Clear anodize- Volume Discount
Standard Price: MYR 156.76- Days to Ship: 6 Day(s) or more -
Standard Price: MYR 29.10- Days to Ship: 1 Day(s) or more -
- Economy
MISUMI
This is an economy item, The price is cheaper than the MISUMI standard product.
- Volume Discount
Standard Price: MYR 41.41- Days to Ship: 7 Day(s) -
- Economy
MISUMI
This is an economy item, The price is cheaper than the MISUMI standard product.
- Volume Discount
Standard Price: MYR 43.90- Days to Ship: 7 Day(s) -
Flanged Idlers with Teeth - MXL, XL - Center Bearing
MISUMI
[Material]
· Pulley: Aluminum alloy
· Flange: Aluminum alloy
· Bearing: Steel
[Surface treatment]
· Clear anodize, electroless nickel plating- Volume Discount
Standard Price: MYR 81.23- Days to Ship: 6 Day(s) or more -
Flanged Idlers with Teeth - P5M, P8M - Both Sides Bearing
MISUMI
It can be used for timing belt tension adjustment and driven pulley.
[Material]
· Pulley: Aluminum alloy, extra super duralumin aluminum alloy, S45C equivalent
· Flange: Aluminum alloy, SPCC
· Bearing: Steel
[Surface treatment]
· Clear anodize, hard clear anodize (firm hardness 300HV~), black oxide- Volume Discount
Standard Price: MYR 162.45- Days to Ship: 7 Day(s) -
Flanged Idlers with Teeth - 2GT, 3GT, 5GT, 8YU - Center Bearing
MISUMI
It can be used for timing belt tension adjustment and driven pulley.
[Material]
· Pulley: Aluminum alloy, S45C equivalent
· Flange: Aluminum alloy, SPCC
· Bearing: Steel
[Surface treatment]
· Clear anodize, black oxideStandard Price: MYR 89.71- Days to Ship: 6 Day(s) or more -
Flanged Idlers with Teeth - T5, T10 - Center Bearing
MISUMI
It can be used for timing belt tension adjustment and driven pulley.
[Material]
· Pulley: Aluminum alloy
· Flange: Aluminum alloy
· Bearing: Steel
[Surface treatment]
· Clear anodize- Volume Discount
Standard Price: MYR 109.11- Days to Ship: 2 Day(s) or more -
Flanged Idlers with Teeth - MXL, XL - Both Sides Bearing
MISUMI
[Material]
· Pulley: Aluminum alloy
· Flange: Aluminum alloy
· Bearing: Steel
[Surface treatment]
· Clear anodize- Volume Discount
Standard Price: MYR 73.95- Days to Ship: 2 Day(s) or more -
Flanged Idlers with Teeth - L, H - Center Bearing
MISUMI
It can be used for timing belt tension adjustment and driven pulley.
[Material]
· Pulley: Extra super duralumin aluminum alloy, S45C equivalent
· Flange: Aluminum alloy, SPCC
· Bearing: Steel
[Surface treatment]
· Clear anodize, electroless nickel plating, black oxide- Volume Discount
Standard Price: MYR 110.94- Days to Ship: 6 Day(s) or more -
Flanged Idlers with Teeth - P2M, P3M, P5M, P8M - Center Bearing
MISUMI
It can be used for timing belt tension adjustment and driven pulley.
[Material]
· Pulley: Aluminum alloy, extra super duralumin aluminum alloy, S45C equivalent
· Flange: Aluminum alloy, SPCC
· Bearing: Steel
[Surface treatment]
· Clear anodize, black oxide- Volume Discount
Standard Price: MYR 116.09- Days to Ship: 6 Day(s) or more -
Standard Price: MYR 43.33- Days to Ship: 7 Day(s) -
- Economy
MISUMI
This is an economy item, The price is cheaper than the MISUMI standard product.
- Volume Discount
Standard Price: MYR 123.08- Days to Ship: 7 Day(s) -
KONISHI
Bearings are set on the timing belt pulley, and 6004ZZ (inner diameter: 20 mm) is used for the bearings.
[Features]
・ Idler for timing belt
・ Please use in the tensioner according to the belt size- CAD ：
- 2D
Standard Price: MYR 210.09 Days to Ship: 5 Day(s) or more
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Specifications |
| Type |
| Tooth Type (Belt Type) |
| Belt Width Used (mm)(mm) |
| No. of Teeth(T) |
| Pulley Shape |
| Material |
| Belt Width(Inch) |
| Surface Treatment |
| Features, Areas of Application |
| Environmental Compliance |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | KONISHI |
| Product Series | Flanged Idlers with Teeth - S5M, S8M, S14M - Both Sides Bearing | Flanged Idlers with Teeth - 2GT, 3GT, 5GT, 8YU - Both Sides Bearing | Flanged Idlers with Teeth - 2GT, 3GT, 5GT, 8YU - Center Bearing | Flanged Idlers with Teeth - P2M, P3M, P5M, P8M - Center Bearing | ||||||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||||
| Days to Ship | 7 Day(s) | 1 Day(s) or more | 1 Day(s) or more | 1 Day(s) or more | 2 Day(s) or more | 1 Day(s) or more | 2 Day(s) or more | 5 Day(s) or more | 14 Day(s) or more | 1 Day(s) or more | 7 Day(s) | 1 Day(s) or more | 7 Day(s) | 7 Day(s) | 6 Day(s) or more | 1 Day(s) | 1 Day(s) or more | 7 Day(s) | 7 Day(s) | 7 Day(s) | 2 Day(s) or more | 1 Day(s) or more | 5 Day(s) or more | 7 Day(s) or more | 7 Day(s) | 7 Day(s) or more | 6 Day(s) or more | 1 Day(s) or more | 7 Day(s) | 7 Day(s) | 6 Day(s) or more | 7 Day(s) | 6 Day(s) or more | 2 Day(s) or more | 2 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 7 Day(s) | 7 Day(s) | 5 Day(s) or more |
| Specifications |
|
|
|
|
|
|
|
|
|
|
| |||||||||||||||||||||||||||||
| Type | Idler with Teeth | Idler with Teeth | Idler with Teeth | Idler with Teeth | Idler with Teeth | Idler with Teeth | Idler with Teeth | Idler with Teeth | Idler with Teeth | Idler with Teeth | Idler with Teeth | Idler with Teeth | Idler with Teeth | Idler with Teeth | Idler with Teeth | Idler with Teeth | Idler with Teeth | Idler with Teeth | Idler with Teeth | Idler with Teeth | Idler with Teeth | Idler with Teeth | Idler with Teeth | Idler with Teeth | Idler with Teeth | Idler with Teeth | Idler with Teeth | Idler with Teeth | Idler with Teeth | Idler with Teeth | Idler with Teeth | Idler with Teeth | Idler with Teeth | Idler with Teeth | Idler with Teeth | Idler with Teeth | Idler with Teeth | Idler with Teeth | Idler with Teeth | Idler with Teeth |
| Tooth Type (Belt Type) | S8M ～ S14M | S5M | T5 | S3M | T5 ～ T10 | S5M ～ S8M | S5M ～ S14M | 5M | 8M | S8M | T10 | S2M ～ S3M | T5 | S3M | 2GT ～ 8YU | T10 | MXL | S5M | AT5 | AT10 | S2M ～ S3M | XL | 3M | AT5 ～ AT10 | L | H ～ L | AT5 ～ AT10 | S2M | MXL | S2M | MXL ～ XL | P5M ～ P8M | 2GT ～ 8YU | T5 ～ T10 | MXL ～ XL | H ～ L | P2M ～ P8M | XL | H | L |
| Belt Width Used (mm)(mm) | 15 ～ 60 | 10 ～ 25 | 10 ～ 25 | 6 ～ 15 | 10 ～ 50 | 10 ～ 40 | 10 ～ 60 | 9 ～ 15 | 15 ～ 40 | 15 ～ 25 | 15 ～ 50 | 4 ～ 15 | 10 ～ 25 | 6 ～ 15 | 4 ～ 25 | 20 ～ 50 | 4.8 ～ 9.5 | 10 ～ 25 | 10 ～ 15 | 15 ～ 25 | 4 ～ 15 | 6.4 ～ 12.7 | 6 ～ 9 | 10 ～ 25 | 12.7 ～ 38.1 | 12.7 ～ 50.8 | 10 ～ 25 | 4 ～ 10 | 4.8 ～ 12.7 | 4 ～ 10 | 4.8 ～ 12.7 | 10 ～ 25 | 6 ～ 25 | 10 ～ 25 | 4.8 ～ 12.7 | 12.7 ～ 50.8 | 6 ～ 25 | 6.4 ～ 12.7 | 19.1 ～ 50.8 | 12.7 |
| No. of Teeth(T) | 20 ～ 40 | 16 ～ 40 | 18 ～ 30 | 20 ～ 48 | 16 ～ 30 | 16 ～ 40 | 16 ～ 40 | 20 ～ 32 | 20 ～ 40 | 20 ～ 25 | 16 ～ 26 | 20 ～ 60 | 18 ～ 30 | 20 ～ 60 | 20 ～ 36 | 16 ～ 26 | 16 ～ 40 | 16 ～ 40 | 18 ～ 30 | 16 ～ 26 | 20 ～ 60 | 16 ～ 22 | 20 ～ 32 | 16 ～ 30 | 14 ～ 30 | 14 ～ 30 | 16 ～ 30 | 20 ～ 40 | 16 ～ 60 | 20 ～ 60 | 18 ～ 60 | 25 ～ 36 | 20 ～ 40 | 16 ～ 30 | 16 ～ 60 | 14 ～ 30 | 20 ～ 40 | 16 ～ 36 | 14 ～ 28 | 21 |
| Pulley Shape | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Shape A |
| Material | Steel / Aluminum | Aluminum | Aluminum | Aluminum | Aluminum | Steel / Aluminum / Stainless Steel | Steel / Aluminum | Aluminum | Aluminum | Aluminum | Aluminum | Aluminum | Aluminum | Steel / Aluminum / Stainless Steel | Steel / Aluminum | Aluminum | Aluminum | Steel / Aluminum / Stainless Steel | Aluminum | Aluminum | Aluminum / Stainless Steel | Aluminum | Aluminum | Aluminum | Steel / Aluminum | Steel / Aluminum | Aluminum | Aluminum | Steel / Aluminum | Steel / Aluminum | Aluminum | Steel / Aluminum | Steel / Aluminum | Aluminum | Aluminum | Steel / Aluminum | Steel / Aluminum | Steel / Aluminum | Steel / Aluminum | Steel |
| Belt Width(Inch) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.19 ～ 0.37 | - | - | - | - | 0.25 ～ 0.5 | - | - | 0.5 ～ 1.5 | 0.5 ～ 2 | - | - | 0.19 ～ 0.5 | - | 0.19 ～ 0.5 | - | - | - | 0.19 ～ 0.5 | 0.5 ～ 2 | - | 0.25 ～ 0.5 | 0.75 ～ 2 | 0.5 |
| Surface Treatment | Black Oxide / Clear Anodize / Hard Clear Anodize / Electroless Nickel Plating | Clear Anodize | Clear Anodize | Clear Anodize | Clear Anodize | Not Provided / Black Oxide / Clear Anodize / Hard Clear Anodize / Electroless Nickel Plating | Black Oxide / Clear Anodize / Hard Clear Anodize / Electroless Nickel Plating | Clear Anodize | Clear Anodize | Clear Anodize | Clear Anodize | Clear Anodize / Hard Clear Anodize / Electroless Nickel Plating | Clear Anodize | Not Provided / Black Oxide / Clear Anodize / Hard Clear Anodize / Electroless Nickel Plating | Black Oxide / Clear Anodize | Clear Anodize | Clear Anodize | Not Provided / Black Oxide / Clear Anodize / Hard Clear Anodize / Electroless Nickel Plating | Clear Anodize / Hard Clear Anodize | Clear Anodize | Not Provided / Clear Anodize / Electroless Nickel Plating | Clear Anodize | Clear Anodize | Clear Anodize / Hard Clear Anodize | Black Oxide / Clear Anodize / Electroless Nickel Plating | Black Oxide / Clear Anodize / Hard Clear Anodize / Electroless Nickel Plating | Clear Anodize | Clear Anodize | Black Oxide / Clear Anodize / Electroless Nickel Plating | Black Oxide / Clear Anodize / Electroless Nickel Plating | Clear Anodize / Electroless Nickel Plating | Black Oxide / Clear Anodize / Hard Clear Anodize | Black Oxide / Clear Anodize | Clear Anodize | Clear Anodize | Black Oxide / Clear Anodize / Electroless Nickel Plating | Black Oxide / Clear Anodize | Black Oxide / Clear Anodize / Electroless Nickel Plating | Black Oxide / Clear Anodize / Hard Clear Anodize / Electroless Nickel Plating | Not Provided |
| Features, Areas of Application | - | - | - | - | Not Applicable | - | - | - | - | - | - | Not Applicable | - | - | - | - | - | - | - | - | Not Applicable | - | - | Not Applicable | - | Not Applicable | - | - | - | - | Not Applicable | Not Applicable | - | - | Not Applicable | - | - | - | - | - |
| Environmental Compliance | - | - | - | - | RoHS compliant (10 substances) | - | - | - | - | - | - | RoHS compliant (10 substances) | - | - | - | - | - | - | - | - | RoHS compliant (10 substances) | - | - | RoHS compliant (10 substances) | - | RoHS compliant (10 substances) | - | - | - | - | RoHS compliant (10 substances) | RoHS compliant (10 substances) | - | - | RoHS compliant (10 substances) | - | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Tooth Type (Belt Type)
-
Belt Width Used (mm)(mm)
-
No. of Teeth(T)
-
Pulley Shape
-
Material
- Steel
- Aluminum
- Stainless Steel
- Plastic
-
Belt Width(Inch)
-
Surface Treatment
-
Features, Areas of Application
-
Environmental Compliance
- RoHS compliant (10 substances)
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
Days to Ship
-
- All
- 1 Day(s) or Less
- 2 Day(s) or Less
- 4 Day(s) or Less
- 5 Day(s) or Less
- 6 Day(s) or Less
- 7 Day(s) or Less
- 8 Day(s) or Less
- 9 Day(s) or Less
- 10 Day(s) or Less
- 11 Day(s) or Less
Related Categories to Timing Pulleys, Idlers
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy