(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Universal Joints（Body Material：Steel）
| Days to Ship |
|
|---|
-
Standard Price: MYR 81.69- Days to Ship: 4 Day(s) or more -
Universal Joints - Set Keyway / Tapped
MISUMI
[Features]No pin hole machining is required on the shaft, but only keyway machining is required to tighten.
- Volume Discount
Standard Price: MYR 164.54- Days to Ship: 2 Day(s) or more -
MISUMI
[Features]·This is a coupling that allows the joining angle to be changed freely.
- Volume Discount
Standard Price: MYR 60.81- Days to Ship: 2 Day(s) or more -
MIYOSHI KIKAI
SPS (spline shaft), SPA / SPO (spline sleeve) is made of: S-45C material. Use on the sliding part during rotation.
- CAD ：
- 2D
Standard Price: MYR 112.23- Days to Ship: 7 Day(s) or more -
MIYOSHI KIKAI
[Features]
· Use for tension push power transmission mechanism in horizontal and vertical directions.
· Unichrome finish.
· Pin and washer are incorporated into Y type- CAD ：
- 2D
Standard Price: MYR 50.16- Days to Ship: 4 Day(s) or more -
Standard Type Wear-Resistant HJ Series
MIYOSHI KIKAI
[Features]
· With total hardening treatment for increased fatigue strength.
· Additional machining cannot be performed on the hardened product.
· To extend life, boots and oil pack should be used.
· When shaft hole is T-shaped, please indicate new JIS key, or previous JIS key.
· With key groove processing, the strong pins and joint pins are not included.Standard Price: MYR 184.80- Days to Ship: 4 Day(s) or more -
Standard Type, Precision Type H Series
MIYOSHI KIKAI
[Features]
·The pin is dry lubricated to improve abrasion resistance.
·Please use boots and oil packs to extend the life of the joints.
·For B or T, please specify the new JIS key or the old JIS key.
·With keyway processing, spring pin is not included.Standard Price: MYR 242.66- Days to Ship: 4 Day(s) or more -
Standard Type, Strong Type BD Series
MIYOSHI KIKAI
[Features]
· High torque normal use.
· Material: S45C
· Holes for the spring pins included can be machined in the l/2 position simultaneously with the shaft.
· To extend life, boots and oil pack should be used.
· When the shaft hole shape is B or T, please indicate new JIS key, or previous JIS key.
· With key groove processing, spring pin is not included.Standard Price: MYR 268.60- Days to Ship: 7 Day(s) or more -
Standard Type Precision S Model
MIYOSHI KIKAI
Holes for the spring pins included can be machined in the l/2 position simultaneously with the shaft.
· To extend life, boots and oil pack should be used.
· When the shaft hole shape is B or T, please indicate new JIS key, or previous JIS key.
· With key groove processing, the spring pins are not included.Standard Price: MYR 273.35- Days to Ship: 4 Day(s) or more -
Standard Type, Power Type B Series
MIYOSHI KIKAI
[Features]
· Holes for spring pins included can be machined in the l/2 position simultaneously with the shaft.
· To extend life, boots and oil pack should be used.
· When the shaft hole shape is B or T, please indicate new JIS key, or previous JIS key.
· With key groove processing, the spring pins are not included.Standard Price: MYR 139.85- Days to Ship: 4 Day(s) or more -
Standard Miniature Model MM Model
MIYOSHI KIKAI
High precision for ultra-small diameter use. 3 types of material available: SK-4 with nitriding composite treatment, SUS304 & SUS316.
Standard Price: MYR 287.31 Days to Ship: 15 Day(s) or more -
Type with shaft, joint with hexagonal shaft, precision type, S-GX type
MIYOSHI KIKAI
[Features]
·You can freely cut any part of the joint with a hexagonal shaft and the intermediate shaft.
·The amount of expansion and contraction is large and the mounting range is wide.Standard Price: MYR 1,334.30- Days to Ship: 10 Day(s) or more -
Shaft attached type Joint with spline shaft Bearing type K-P model
MIYOSHI KIKAI
Miyoshi Kikai universal joint shaft type spline shaft joint bearing type KP type.
Standard Price: MYR 2,010.30- Days to Ship: 10 Day(s) or more -
Standard Precision Type D Model
MIYOSHI KIKAI
[Features]
· Spring pins included can be machined in the l/2 position simultaneously with the shaft.
· To extend life, boots and oil pack should be used.
· When the shaft shape is B or T, please indicate new JIS key, or previous JIS key.
· With key groove processing, spring pin is not included.Standard Price: MYR 607.90- Days to Ship: 7 Day(s) or more -
Standard Type Wear-Resistant HJD Type
MIYOSHI KIKAI
[Features]
· With total hardening treatment for increased fatigue strength.
· Additional machining cannot be performed on the hardened product.
· When shaft hole is T-shaped, please indicate new JIS key, or previous JIS key.
· With key groove processing, the strong pins and joint pins are not included.Standard Price: MYR 328.75- Days to Ship: 7 Day(s) or more -
Standard Bearing Model, K Model
MIYOSHI KIKAI
[Features]
·Grease-filled needle bearings are used, making them suitable for high-speed rotation.
·The attached spring pin hole should be machined at the same time as the shaft at the l/2 position.
·K-20 and above have a grease nipple.
·When using boots, please use type B or type H.
·If the shaft hole shape is B or T, please specify the new JIS key or the old JIS key.
·With keyway processing, the spring pins are not included.
[Applications]
·For high speed rotation.Standard Price: MYR 608.09- Days to Ship: 7 Day(s) or more -
Standard Bearing Model, KD Model
MIYOSHI KIKAI
[Features]
·Uses grease-encapsulated needle bearings, making it suitable for high-speed rotation.Standard Price: MYR 1,537.45- Days to Ship: 7 Day(s) or more -
Standard Miniature Model, M Model
MIYOSHI KIKAI
High precision for small diameter use. In order to improve wear resistance, has been treated with S45C nitride composite processing.
Standard Price: MYR 196.32- Days to Ship: 7 Day(s) or more -
Standard Type Hobby Type R Series
MIYOSHI KIKAI
For low torque manual use. Material: SUM24L. Surface plating processed.
Standard Price: MYR 127.96- Days to Ship: 4 Day(s) or more -
MIYOSHI KIKAI
GXS(Hex sanding shaft) is made of S-45C. GXA/GXO (Hex hole sleeve) is made of: STKM-13. Hex shaft / Sleeve can be cut at any position.
[Features]
· The hex shaft and sleeve can be cut at any position.
· Cannot be used in sliding part while rotating.
· When using as a slide unit, the NX slide unit should also be considered.- CAD ：
- 2D
Standard Price: MYR 116.21- Days to Ship: 7 Day(s) or more -
MIYOSHI KIKAI
Use for tension push power transmission mechanism in horizontal and vertical directions. Unichrome plating finish.
- CAD ：
- 2D
Standard Price: MYR 39.99- Days to Ship: 4 Day(s) or more -
Type with shaft, joint with hexagonal shaft, precision type, H-GX type
MIYOSHI KIKAI
The amount of expansion and contraction that can be freely cut at any part of the intermediate shaft is large, and the mounting range is wide.
Standard Price: MYR 1,130.31- Days to Ship: 10 Day(s) or more -
Reinforced B-GX Type of Hexagonal Shaft Joint
MIYOSHI KIKAI
[Features]
· Shaft can be freely cut at any point.
· Expansion / contraction range is large for broad range of installations.Standard Price: MYR 926.63- Days to Ship: 10 Day(s) or more -
Shaft Type Joint With Hex Shaft, Wear-Resistant HJ-GX Model
MIYOSHI KIKAI
[Features]
·Joints with hexagonal shafts and intermediate shafts can be cut freely
·Expansion / contraction range is large for broad range of installations.Standard Price: MYR 840.14- Days to Ship: 7 Day(s) or more -
Bearing K-GX Type of Hexagonal Shaft Joint
MIYOSHI KIKAI
[Features]
· Comprises 2 standard joints and joint slide (GXS, GXA).
· Joint and join slide are set with spring pin.
· When shaft machining (keyway, tapping hole, etc.), after making the mating mark, remove the spring pin, and release the joint and joint slide.
· After machining, be sure to set back to the original position according to mating mark. (HJ-GX uses a joint pin instead of a spring pin.)
· When setting, please ensure symmetry of left / right joint assembly E yoke and F yoke.
· Please note, if set incorrectly, output wheel speed will become uneven.Standard Price: MYR 2,112.40- Days to Ship: 10 Day(s) or more -
With Shaft Model Joints with Spline Shaft Accurate Model S-P Model
MIYOSHI KIKAI
[Features]
·You can freely cut any part of the joint with a hexagonal shaft and the intermediate shaft.
·The amount of expansion and contraction is large and the mounting range is wide.Standard Price: MYR 947.58- Days to Ship: 10 Day(s) or more -
Shaft type spline, shaft joint, precise type H-P
MIYOSHI KIKAI
Please refer to P.6 "Requests for Ordering" in the catalog before placing an order. Please refer to "Joint Boots" on pages 24-25 of the catalog.
Standard Price: MYR 885.57- Days to Ship: 10 Day(s) or more -
Wheel attached type spline wheel attached joint strong type B-P type
MIYOSHI KIKAI
[Features]
·Joints with hexagonal shafts and intermediate shafts can be cut freely
·Expansion / contraction range is large for broad range of installations.Standard Price: MYR 674.11- Days to Ship: 10 Day(s) or more -
With Shaft Model Joints with Spline Shaft Abrasion Resistant Model HJ-P Model
MIYOSHI KIKAI
[Features]·Rotation and sliding can be transmitted simultaneously. [Materials]·SCM415.
Standard Price: MYR 764.03- Days to Ship: 10 Day(s) or more -
Joint Power Type With Spline Shaft B-PS Series
MIYOSHI KIKAI
[Features]
· P series are short-lead, easy order type.
· Comprising of 2 standard joints (SPS, and join slide SPA).
· In the case of the standard product, since the joint and the join slide are not set on delivery, once the full length dimension is decided, use the spring pin provided to set for use (HJ-P uses joint pin instead of spring pin ).
· When setting, please ensure symmetry of left / right joint assembly.
· Please note, if set incorrectly, output shaft speed will become uneven.Standard Price: MYR 2,190.09- Days to Ship: 10 Day(s) or more -
Flexible Shaft Compact Design SF Type (Flexible Shaft)
SHOWA SPRING
Low power / high speed can be changed for transmission freely in the desired direction.
Standard Price: MYR 106.75- Days to Ship: 5 Day(s) or more -
Flex Shaft CS Type for Bidirectional Rotation and Remote Control (Slide Bearing)
SHOWA SPRING
OILES metal (bushing) is used for the bearing.
Basically for manual rotation (remote control).
[Features]
・ The structure other than the inner shaft is exactly the same as the DS type, so its cost is low and it is durable
・ Allowable transmission torque drops only to 80% even when rotating counterclockwiseDays to Ship: 17 Day(s) or more
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Shaft Bore Dia. (machined) D1(Ø) |
| Allowable Torque Range(N•m) |
| Shaft Bore Dia. (machined) D2(Ø) |
| Outer Dia. A(Ø) |
| Overall Length W(mm) |
| Features |
| Application |
| Type |
| Max. Rotational Speed Range(r/min) |
| Body Material |
| Allowable Torque(N•m) |
| Max. Rotational Speed(r/min) |
| Allowable Lateral Misalignment Range(mm) |
| Allowable Lateral Misalignment(mm) |
| Allowable Angular Misalignment(deg) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | SUNGIL | MISUMI | MISUMI | MIYOSHI KIKAI | MIYOSHI KIKAI | MIYOSHI KIKAI | MIYOSHI KIKAI | MIYOSHI KIKAI | MIYOSHI KIKAI | MIYOSHI KIKAI | MIYOSHI KIKAI | MIYOSHI KIKAI | MIYOSHI KIKAI | MIYOSHI KIKAI | MIYOSHI KIKAI | MIYOSHI KIKAI | MIYOSHI KIKAI | MIYOSHI KIKAI | MIYOSHI KIKAI | MIYOSHI KIKAI | MIYOSHI KIKAI | MIYOSHI KIKAI | MIYOSHI KIKAI | MIYOSHI KIKAI | MIYOSHI KIKAI | MIYOSHI KIKAI | MIYOSHI KIKAI | MIYOSHI KIKAI | MIYOSHI KIKAI | MIYOSHI KIKAI | SHOWA SPRING | SHOWA SPRING |
| Product Series | Type with shaft, joint with hexagonal shaft, precision type, S-GX type | Shaft attached type Joint with spline shaft Bearing type K-P model | Type with shaft, joint with hexagonal shaft, precision type, H-GX type | With Shaft Model Joints with Spline Shaft Accurate Model S-P Model | Wheel attached type spline wheel attached joint strong type B-P type | With Shaft Model Joints with Spline Shaft Abrasion Resistant Model HJ-P Model | Flex Shaft CS Type for Bidirectional Rotation and Remote Control (Slide Bearing) | |||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
| |||||||||||||||||||||||||
| Days to Ship | 4 Day(s) or more | 2 Day(s) or more | 2 Day(s) or more | 7 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 7 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 15 Day(s) or more | 10 Day(s) or more | 10 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 4 Day(s) or more | 7 Day(s) or more | 4 Day(s) or more | 10 Day(s) or more | 10 Day(s) or more | 7 Day(s) or more | 10 Day(s) or more | 10 Day(s) or more | 10 Day(s) or more | 10 Day(s) or more | 10 Day(s) or more | 10 Day(s) or more | 5 Day(s) or more | 17 Day(s) or more |
| Shaft Bore Dia. (machined) D1(Ø) | 4 ～ 16 | 10 ～ 20 | 6 ～ 30 | 5 ～ 38 | - | 6 ～ 30 | 6 ～ 30 | 6 ～ 60 | 6 ～ 60 | 6 ～ 60 | 1.5 | 8 ～ 30 | 10 ～ 30 | 6 ～ 60 | 6 ～ 30 | 10 ～ 30 | 10 ～ 30 | 2 ～ 5.5 | 4 ～ 10 | 6 ～ 30 | - | 6 ～ 30 | 6 ～ 30 | 6 ～ 30 | 10 ～ 30 | 6 ～ 30 | 6 ～ 30 | 6 ～ 30 | 6 ～ 30 | 20 ～ 60 | - | - |
| Allowable Torque Range(N•m) | 1.01~3.00 | 20.01~50.00 ～ 50.01~100.00 | 5.01~10.00 ～ 100 < 500 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.05~1.00 ～ 1.01~3.00 | 1.01~3.00 |
| Shaft Bore Dia. (machined) D2(Ø) | 4 ～ 16 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Outer Dia. A(Ø) | 29 ～ 54 | 19 ～ 36 | 12 ～ 51 | 5 ～ 35 | - | 12 ～ 51 | 12.5 ～ 57 | 12 ～ 120 | 16 ～ 115 | 12 ～ 120 | 3 | 18 ～ 58 | 20 ～ 60 | 16 ～ 115 | 12 ～ 51 | 20 ～ 60 | 20 ～ 60 | 6 ～ 10 | 8 ～ 19 | 11 ～ 54 | 8 ～ 48 | 12.5 ～ 57 | 12 ～ 60 | 12 ～ 51 | 20 ～ 60 | 16 ～ 58 | 12.5 ～ 57 | 12 ～ 60 | 12 ～ 51 | 40 ～ 120 | - | 32 |
| Overall Length W(mm) | 28 ～ 58 | 42 ～ 139 | 31 ～ 139 | - | 20 ～ 100 | 31 ～ 122 | 40 ～ 165 | 75 ～ 485 | 34 ～ 220 | 50 ～ 300 | 12 | 132~245 ～ 397~599 | 219~450 ～ 556~1188.5 | 50 ～ 340 | 49.5 ～ 195 | 62 ～ 178 | 96 ～ 275 | 15 ～ 30 | 24 ～ 42 | - | 16 ～ 96 | 131~250 ～ 517~685 | 162~270 ～ 553~711 | 105~232 ～ 399~599 | 194~309 ～ 546~711 | 136.5~244 ～ 444~1095 | 148.5~252 ～ 530~1164 | 168.5~266.5 ～ 556~1185 | 130.5~238 ～ 444~1094 | 324~806 ～ 760~1312 | 150 ～ 300 | - |
| Features | - | - | - | - | - | - | High Accuracy ～ High Durability | High Torque | High Accuracy ～ Small | High Torque | Small | High Accuracy ～ Small | - | High Accuracy ～ Small | - | - | - | Small | - | - | - | High Accuracy ～ High Durability | High Torque | - | - | High Accuracy ～ Small | High Accuracy ～ High Durability | High Torque | - | High Torque | - | High Accuracy ～ Vibration Insulation |
| Application | - | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard |
| Type | - | Standard Type | Standard Type | Shaft Type | Maintenance Components | Standard Type | Standard Type | Standard Type | Standard Type | Standard Type | Standard Type | Shaft Type | Shaft Type | Standard Type | Standard Type | Standard Type | Standard Type | Standard Type | Standard Type | Shaft Type | Maintenance Components | Shaft Type | Shaft Type | Shaft Type | Shaft Type | Shaft Type | Shaft Type | Shaft Type | Shaft Type | Shaft Type | Flexible Type | Flexible Type |
| Max. Rotational Speed Range(r/min) | 2001~4000 | - | - | - | - | 301~1000 ～ 1001~2000 | 301~1000 ～ 1001~2000 | 100~ 300 ～ 1001~2000 | 100~ 300 ～ 2001~4000 | 100~ 300 ～ 1001~2000 | - | - | - | 100~ 300 ～ 1001~2000 | 301~1000 ～ 1001~2000 | 301~1000 ～ 2001~4000 | 301~1000 ～ 2001~4000 | 301~1000 | - | - | - | - | - | - | - | - | - | - | - | - | - | < 100 |
| Body Material | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel |
| Allowable Torque(N•m) | 0.12 ～ 1.5 | 20.1 ～ 175 | 5.3 ～ 495 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.392 ～ 1.862 | 2.94 |
| Max. Rotational Speed(r/min) | 3000 | - | - | - | - | 500 ～ 1800 | 510 ～ 2000 | 160 ～ 1300 | 280 ～ 2100 | 220 ～ 1700 | - | - | - | 200 ～ 1500 | 380 ～ 1400 | 950 ～ 2500 | 730 ～ 2200 | 700 ～ 1000 | - | - | - | - | - | - | - | - | - | - | - | - | - | 100 |
| Allowable Lateral Misalignment Range(mm) | 1.1~3.0 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Allowable Lateral Misalignment(mm) | 2 ～ 3 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 4,520 |
| Allowable Angular Misalignment(deg) | 10 ～ 12 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 180 |
Loading...
Configure
Specification/Dimensions
-
Shaft Bore Dia. (machined) D1(Ø)
-
Allowable Torque Range(N•m)
-
Shaft Bore Dia. (machined) D2(Ø)
-
Outer Dia. A(Ø)
-
Overall Length W(mm)
- 9
- 12
- 15
- 16
- 18
- 19.1
- 19.4
- 20
- 22.4
- 23.6
- 24
- 24.2
- 26.5
- 27
- 27.2
- 28
- 28.5
- 30
- 30.6
- 31
- 32
- 33.5
- 34
- 35
- 35.3
- 35.6
- 36
- 37.6
- 39
- 40
- 41.7
- 42
- 43
- 44
- 45
- 45.6
- 46.2
- 48
- 49.5
- 50
- 50.8
- 51
- 51.4
- 52
- 53.3
- 54
- 56
- 58
- 59
- 60
- 62
- 62.1
- 64
- 65
- 67.5
- 67.6
- 68
- 70
- 71
- 72
- 73
- 74
- 75
- 75.5
- 76
- 80
- 81
- 82
- 83
- 84
- 86
- 87
- 88
- 89.8
- 90
- 92
- 94
- 94.5
- 95
- 96
- 100
- 102
- 104
- 105
- 105~232
- 108
- 112
- 117.5
- 120
- 122
- 122~237
- 124
- 125
- 126
- 127
- 129
- 130
- 130.5~238
- 131~250
- 132~245
- 134
- 136~269
- 136.5~244
- 139
- 140
- 143
- 144
- 144~275
- 145
- 147.5~402
- 148.5~252
- 149
- 150
- 153
- 155.5~409
- 156
- 158
- 160
- 162~270
- 163
- 163~265
- 164
- 164~283
- 165
- 167
- 168
- 168~287
- 168.5~266.5
- 175
- 175.5~423.5
- 176~297
- 178
- 179~418
- 180
- 180~277
- 180.5~423.5
- 182
- 185~423
- 187.5~433
- 190
- 192
- 192~360
- 194~309
- 195
- 198~366
- 200
- 206
- 207~440
- 212
- 212~321
- 212~440
- 219~373
- 219~450
- 220
- 220~547
- 224~325
- 224~551
- 228
- 231~458
- 233~331
- 241~391
- 242~561
- 244~404
- 248
- 248~567
- 250
- 257~575
- 259~403
- 262~580
- 264~351
- 265~577
- 268~584.5
- 269~422
- 270
- 270~444
- 275
- 283~593
- 284~454
- 288~599
- 290
- 294~794
- 295~602
- 298
- 299~436
- 300
- 305~535
- 307~533
- 310
- 312~808.5
- 316~480
- 318~621.5
- 319~811
- 324~806
- 326
- 329~819
- 330~451
- 335~842
- 340
- 340~1018
- 343~638.5
- 345~575
- 349~581
- 350
- 353~1036
- 355~842
- 355~1040
- 360~1034
- 380~500
- 383~528
- 388~528
- 390
- 395~1065
- 397~599
- 399~599
- 399~617
- 401~1072
- 403~878
- 403~880.5
- 407~605
- 425~1094
- 426
- 434~645
- 437~1101
- 441~645
- 444~1094
- 444~1095
- 458~1095
- 465~1122
- 465~1125.5
- 485
- 517~685
- 520~1136
- 530~1164
- 546~711
- 553~711
- 556~1185
- 556~1188.5
- 588~1182
- 650~1223
- 690~1255
- 760~1312
-
Features
-
Application
-
Type
-
Max. Rotational Speed Range(r/min)
-
Body Material
-
Allowable Torque(N•m)
-
Max. Rotational Speed(r/min)
-
Allowable Lateral Misalignment Range(mm)
-
Allowable Lateral Misalignment(mm)
-
Allowable Angular Misalignment(deg)
Narrow search by specifying Manufacturer
-
- MIYOSHI KIKAI (27)
- SHOWA SPRING (2)
- SUNGIL (1)
- MIKI PULLEY (0)
- SAKAI (0)
- ESCO (0)
- MIGHTY (0)
CAD
-
- 2D
- 3D
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy