(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Stepping Motors（Control Method：Open Loop）
| Days to Ship |
|
|---|
-
High Torque 2-Phase Stepping Motor, Standard type, PKP Series
ORIENTAL MOTOR
[Features]
・ In addition to increasing the torque of the motor, a wide range of motor current specifications are available
・ Please choose the ideal motor according to your design scene
・ By using a motor with a high torque design, the manufacturer has achieved a torque increase of 1.2 to 1.7 times (maximum excitation static torque) compared to the standard type PK series of the same sizeStandard Price: MYR 215.75- Days to Ship: 4 Day(s) or more -
Standard Price: MYR 345.65- Days to Ship: 9 Day(s) or more -
ORIENTAL MOTOR
The CRK Series built-in positioning function type is a microstepping-driven DC input 5-phase stepper motor unit with a built-in positioning function in a compact driver.
[Features]
・ Lineup of products with encoders (CRK only)
・ A high torque, low vibration stepper motor with a basic step angle of 0.72 (500 divisions per rotation) (PK only)
・ High-precision positioning can be achieved with low vibration and low noise (A separate driver is required to drive) (PK only)Standard Price: MYR 577.70- Days to Ship: 17 Day(s) or more -
42/57 Series High Torque Hybrid Type Stepper Motor With an Integrated Step Angle of 1.8
FUXING
- 42/57 Series High Torque Hybrid Type Stepper Motor with 1.8° step angle from FULLING MOTOR
- Step angle: 1.8°
- Step angle accuracy: ± 5% (full step, no load)
- Resistance accuracy: ± 10% (20℃)
- Inductance accuracy: ± 20% (1kHz)
- Temperature Rise: 80℃ Max.
- Ambient Temperature: -20℃～+50℃
- Insulation Resistance: 100MΩ Min. ,500VDC
- Dielectric Strength: 500VAC for one minute
- Max. radial force: 28N (20mm from the flange)
- Max. axial force: 10NStandard Price: MYR 514.03- Days to Ship: 3 Day(s) or more -
Controller Built-In Micro Step Driver and Stepper Motor Set CSA-UP Series
SHINANOKENSHI
Various operations can be programed in 8 tables
[Features]
· Integrated controller function for small and lightweight drivers.
· Various operations can be programed in 8 tables.
· 4 levels of micro step division (1, 2, 4, 16) selectable.
· Home return operation possible with origin sensor input.
· Easy setting with the included dedicated application.
· Input power supply: DVC24V.
Error output function.
· Abundant protection functions (excess heating, voltage and current).Standard Price: MYR 1,118.13- Days to Ship: 11 Day(s) or more -
Two-Shaft Simultaneous Drive Speed Controller and Double Stepper Motor Set CSA-UT Series
SHINANOKENSHI
[Features]
· Simultaneous 2 motors operation with one controller.
· Oscillator (pulse generator) built in.
· All motor operations can be set at numeric values.
· Equipped with 2 speed setting function (internal setting value / external analog input).
· Rotation speed: 1 to 1,800r/min, 1r/min may not reach maximum speed depending on the type of motor setting unit, (1,800r/min)
· Acceleration / deceleration setting: 0 to 99.99 seconds.
· Current setting: 0 to 2.00A.
· Continuous reciprocating rotation.
· Stall detection function (input feedback time).
· Lightweight and compact design: W70XH90XD33 mm, 190 g.Standard Price: MYR 1,523.10- Days to Ship: 6 Day(s) or more -
SHINANOKENSHI
[Features]
· Simultaneous 2 motors operation with one controller.
· Oscillator (pulse generator) built in.
· All motor operations can be set at numeric values.
· Equipped with 2 speed setting function (internal setting value / external analog input).
· Rotation speed: 1 to 1,800 r/min,1 r/min setting unit.
· Acceleration / deceleration setting: 0 to 99.99 seconds.
· Current setting: 0 to 2.00A.
· Continuous reciprocating rotation.
· Stall detection function (input feedback time).
· Lightweight and compact design: W70 × H90 × D33 mm, 190 g.Standard Price: MYR 1,928.73- Days to Ship: 11 Day(s) or more -
High Torque 2-Phase Stepping Motor, SH Geared Type, PKP Series
ORIENTAL MOTOR
[Features]
・ New high torque 2-phase stepper motor PKP Series
・ In addition to increasing the torque of the motor, a wide range of motor current specifications are available
・ Please choose the ideal motor according to your design scene
・ A geared type effective for deceleration, torque increase, resolution increase, and vibration countermeasures
・ Backlash is smaller than conventional products. Also, wider speed range and easier to useStandard Price: MYR 625.40- Days to Ship: 17 Day(s) or more -
Stepper Motor With Built-in Controller, SSA-TR Series
SHINANOKENSHI
<Features>
● An input pulse is not required as the motor, driver and controller are integrated into the motor flange size.
● It is easy to set the operation with the included dedicated application.
● Various operations can be programmed in 8 tables.
● Micro step division (1, 2, 4, 16) selectable from 4 levels.
● Design with special bracket for high heat dissipation.
<Applications>
● Equipment for all types of factories (manufacturing/assembly equipment, inspection equipment, experimental equipment, transportation equipment, etc.), positioning and constant rotation control.Standard Price: MYR 1,187.75- Days to Ship: 11 Day(s) or more -
42 Series 2-Phase, High Torque Hybrid Stepper Motor, Step Angle 1.8°
FUXING
- 42 Series 2-Phase, High Torque Hybrid Stepper Motor with 1.8° step from FULLING MOTOR.
- Step angle: 1.8°
- Step angle accuracy: ± 5% (full step, no load)
- Resistance accuracy: ± 10%
- Inductance accuracy: ± 20%
- Temperature Rise: 80℃ Max. (rated current, 2 phase on)
- Ambient Temperature: -20℃～+50℃
- Insulation Resistance: 100MΩ Min. ,500VDC
- Dielectric Strength: 500VAC for one minute
- Max. radial force: 28N (20mm from the flange)
- Max. axial force: 10NStandard Price: MYR 386.82- Days to Ship: 9 Day(s) or more -
57 series 2-phase high torque hybrid type stepping motor with a step angle of 0.9°
FUXING
- 57 series 2-phase high torque hybrid type stepping motor with 0.9° step angle from FULLING MOTOR
- Step angle: 0.9°
- Step angle accuracy: ± 5% (full step, no load)
- Resistance accuracy: ± 10% (20℃)
- Inductance accuracy: ± 20% (1kHz)
- Temperature Rise: 80℃ Max.
- Ambient Temperature: -20℃～+50℃
- Insulation Resistance: 100MΩ Min. ,500VDC
- Dielectric Strength: 500VAC for one minute
- Max. radial force: 75N (20mm from the flange)
- Max. axial force: 15NStandard Price: MYR 280.67- Days to Ship: 9 Day(s) or more -
110 series 3-phase hybrid type stepping motor with a step angle of 1.2°-
FUXING
- Size 110mm 3-Phase Hybrid Stepping Motor from FULLING MOTOR
- Step angle: 1.2°
- Step angle accuracy: ± 5% (full step, no load)
- Resistance accuracy: ± 10%
- Inductance accuracy: ± 20%
- Temperature Rise: 100℃ Max. (rated current)
- Ambient Temperature: -20℃～+50℃
- Insulation Resistance: 100MΩ Min. ,500VDC
- Dielectric Strength: 1800VAC, 1s ,5mA
- Max. radial force: 330N (20mm from the flange)
- Max. axial force: 100N
- Insulation class: FStandard Price: MYR 1,599.74 Days to Ship: 9 Day(s) or more -
Stepper Motor □42 mm (Thin Type)
SANYO DENKI
[Features]
·high torque stepping motor
·A product that achieves an ultra-compact motor size of □42 mmStandard Price: MYR 211.71 Days to Ship: 9 Day(s) or more -
Speed Controller Built-in Stepper Motor "SSA-VR Series"
SHINANOKENSHI
<Features>
● An input pulse is not required as the motor, driver and speed controller are integrated into the motor flange size.
● Operation parameters, I/O function setting and demo operation are possible with the included dedicated application.
● Abnormal rotation detection and automatic recovery are possible with the motor alone.
● Speed control is made simple with analog input.
● Wide speed control range (0 to 1800r/min).
<Applications>
● Equipment for all types of factories (manufacturing/assembly equipment, inspection equipment, experimental equipment, transportation equipment, etc.) and constant rotation control.Standard Price: MYR 1,376.81- Days to Ship: 11 Day(s) or more -
ORIENTAL MOTOR
- Stepping Motor, UPKW Series from ORIENTAL MOTOR.
- Compact Drivers, The UPK•W series drivers are only 5.31 inch (135mm) high and therefore, keep the installation area small. They also come with a built-in mounting bracket for easy installation.
- The UPK•W series does more than provide higher torque. It is also designed so that the motor produces less vibration, and a new driver has been developed to include a vibration control circuit to dramatically reduce vibration in the mid-speed range (1-5kHz).Standard Price: MYR 534.27- Days to Ship: 22 Day(s) or more -
Controller Built-in Microstepping Driver & Stepper Motor Set, CSA-UP With Power Supply Unit
SHINANOKENSHI
Various operations can be programed in 8 tables
[Features]
· Integrated controller function for small and lightweight drivers.
· Various operations can be programed in 8 tables.
· 4 levels of micro step division (1, 2, 4, 16) selectable.
· Home return operation possible with origin sensor input.
· Easy setting with the included dedicated application.
· Input power supply: DC24V.
· Error output function.
· Abundant protection functions (excess heating, voltage and current).Standard Price: MYR 1,442.01- Days to Ship: 11 Day(s) or more -
Step out detection driver & stepping motor set CSA-BX series
SHINANOKENSHI
Step-out detection, closed loop switchable by switch
[Features]
· Step-out detection and closed loop mode can be toggled by switch.
· Step-out detection possible (synchronization loss detection mode) using open loop control.
· Equipped with step-out prevention function (closed loop mode) using closed-loop control.
· Motor startup with speed filter, vibration reduction possible at stopping time.
· 4 step resolution (400, 800, 1600, 3200P/R).
· 13 step current setting: 0.6 to 3.0A
· Abundant protection functions (excess heat, excess regeneration, low voltage, excess load and speed).
· Input power supply: DC24V.
· Auto power down function.Standard Price: MYR 1,351.10- Days to Ship: 11 Day(s) or more -
86 series 2-phase high torque hybrid type stepping motor with a step angle of 1.8°
FUXING
- 86 series 2-phase high torque hybrid type stepping motor with 1.8° step from FULLING MOTOR.
- Step angle: 1.8°
- Step angle accuracy: ± 5% (full step, no load)
- Resistance accuracy: ± 10% (20℃)
- Inductance accuracy: ± 20% (1kHz)
- Temperature Rise: 80℃ Max.
- Ambient Temperature: -20℃～+50℃
- Insulation Resistance: 100MΩ Min. ,500VDC
- Dielectric Strength: 820VAC, 1s, 3mA
- Max. radial force: 220N (20mm from the flange)
- Max. axial force: 60NStandard Price: MYR 606.93- Days to Ship: 4 Day(s) or more -
86 series 2-phase gearbox equipped high torque stepping motor with a step angle of 1.8°
FUXING
- 86 series 2-phase gearbox equipped with a high torque stepping motor with 1.8° step from FULLING MOTOR.
- Step angle: 1.8°
- Step angle accuracy: ± 5% (full step, no load)
- Resistance accuracy: ± 10% (20℃)
- Inductance accuracy: ± 20% (1kHz)
- Temperature Rise: 80℃ Max.
- Ambient Temperature: -20℃～+50℃
- Insulation Resistance: 100MΩ Min. ,500VDC
- Dielectric Strength: 820VAC, 1s, 3mA
- Max. radial force: 220N (20mm from the flange)
- Max. axial force: 60NStandard Price: MYR 797.56 Days to Ship: 13 Day(s) or more -
110 series 2-phase high torque hybrid type stepping motor with a step angle of 1.8°
FUXING
- 110 series 2-phase high torque hybrid type stepping motor with 1.8° step from FULLING MOTOR.
- Step angle: 1.8°
- Step angle accuracy: ± 5% (full step, no load)
- Resistance accuracy: ± 10% (20℃)
- Inductance accuracy: ± 20% (1kHz)
- Temperature Rise: 80℃ Max.
- Ambient Temperature: -20℃～+50℃
- Insulation Resistance: 100MΩ Min. ,500VDC
- Dielectric Strength: 1800VAC, 1s, 5mA
- Max. radial force: 220N (20mm from the flange)
- Max. axial force: 60NStandard Price: MYR 2,280.77 Days to Ship: 9 Day(s) or more
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Type Details |
| Type |
| Square Flange Size A(mm) |
| Power Supply |
| Voltage Specifications |
| Control Method |
| Step Angle(°) |
| Reducer |
| Drive Method |
| Backlash(°) |
| Holding torque (classification)(N·m) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | ORIENTAL MOTOR | ORIENTAL MOTOR | ORIENTAL MOTOR | FUXING | SHINANOKENSHI | SHINANOKENSHI | SHINANOKENSHI | ORIENTAL MOTOR | SHINANOKENSHI | FUXING | FUXING | FUXING | SANYO DENKI | SHINANOKENSHI | ORIENTAL MOTOR | SHINANOKENSHI | SHINANOKENSHI | FUXING | FUXING | FUXING |
| Product Series | High Torque 2-Phase Stepping Motor, Standard type, PKP Series | 42/57 Series High Torque Hybrid Type Stepper Motor With an Integrated Step Angle of 1.8 | Controller Built-In Micro Step Driver and Stepper Motor Set CSA-UP Series | Two-Shaft Simultaneous Drive Speed Controller and Double Stepper Motor Set CSA-UT Series | High Torque 2-Phase Stepping Motor, SH Geared Type, PKP Series | 42 Series 2-Phase, High Torque Hybrid Stepper Motor, Step Angle 1.8° | 57 series 2-phase high torque hybrid type stepping motor with a step angle of 0.9° | 110 series 3-phase hybrid type stepping motor with a step angle of 1.2°- | Controller Built-in Microstepping Driver & Stepper Motor Set, CSA-UP With Power Supply Unit | Step out detection driver & stepping motor set CSA-BX series | 86 series 2-phase high torque hybrid type stepping motor with a step angle of 1.8° | 86 series 2-phase gearbox equipped high torque stepping motor with a step angle of 1.8° | 110 series 2-phase high torque hybrid type stepping motor with a step angle of 1.8° | |||||||
| CAD |
|
|
|
|
|
|
|
| ||||||||||||
| Days to Ship | 4 Day(s) or more | 9 Day(s) or more | 17 Day(s) or more | 3 Day(s) or more | 11 Day(s) or more | 6 Day(s) or more | 11 Day(s) or more | 17 Day(s) or more | 11 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 11 Day(s) or more | 22 Day(s) or more | 11 Day(s) or more | 11 Day(s) or more | 4 Day(s) or more | 13 Day(s) or more | 9 Day(s) or more |
| Type Details | Motor Only | Motor Only / Set | Motor Only | Built-in Driver | Set | Set | Set | Motor Only / Set | Motors / Set | Motor Only | Motor Only | Motor Only | Motor Only | Motors | Motor Only | Set | Set | Motor Only | Motor Only | Motor Only |
| Type | Motor Only | Set / Motor Only | Motor Only | - | - | - | - | Motor Only | - | - | - | - | - | - | Motor Only | - | - | - | - | - |
| Square Flange Size A(mm) | 20 ～ 85 | 20 ～ 90 | 20 ～ 60 | 42 ～ 57 | 28 ～ 60 | 28 ～ 60 | 28 ～ 60 | 28 ～ 60 | 28 ～ 60 | 42 | 57 | 110 | 42 | 42 ～ 60 | 42 ～ 60 | 28 ～ 60 | 42 ～ 60 | 86 | 86 | 110 |
| Power Supply | 2-phase ～ 5-phase | 2-phase ～ 5-phase | 5-phase | 2-phase | 2-phase | 2-phase | 2-phase | 2-phase | 2-phase | 2-phase | 2-phase | 3-phase | DC | 2-phase | 5-phase | 2-phase | 2-phase | 2-phase | 2-phase | 2-phase |
| Voltage Specifications | DC Specification | DC Specification | DC Specification | DC Specification | DC Specification | DC Specification | DC Specification | DC Specification | DC Specification | DC Specification | DC Specification | DC Specification | DC Specification | DC Specification | DC Specification | DC Specification | DC Specification | DC Specification | DC Specification | DC Specification |
| Control Method | Open Loop | Open Loop | Open Loop | Open Loop | Open Loop | Open Loop | Open Loop | Open Loop | Open Loop | Open Loop | Open Loop | Open Loop | Open Loop | Open Loop | Open Loop | Open Loop | Open Loop | Open Loop | Open Loop | Open Loop |
| Step Angle(°) | 0.018 ～ 1.8 | 0.0072 ～ 1.8 | 0.0072 ～ 0.72 | 1.8 | 1.8 | - | - | 0.05 ～ 1.8 | 0.18 ～ 1.8 | 1.8 | 0.9 | 1.2 | 1.8 | 0.18 ～ 1.8 | 0.0144 ～ 0.72 | 1.8 | 0.9 | 1.8 | 1.8 | 1.8 |
| Reducer | Not Provided / Provided | Not Provided / Provided | Not Provided / Provided | Not Provided | Not Provided / Provided | Not Provided / Provided | Not Provided / Provided | Provided | Not Provided / Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided / Provided | Not Provided / Provided | Not Provided / Provided | Not Provided / Provided | Not Provided | Provided | Not Provided |
| Drive Method | Bipolar / Unipolar | Bipolar / Unipolar | Unipolar | Bipolar | Unipolar | Unipolar | Unipolar | Bipolar / Unipolar | Unipolar | Bipolar | Bipolar | Unipolar | Bipolar | Unipolar | Unipolar | Unipolar | Unipolar | Bipolar | Bipolar | Bipolar |
| Backlash(°) | 0.17 ～ 0.75 | 0.034 ～ 0.42 | 0.05 ～ 1 | - | - | - | - | 0.75 ～ 1.5 | 2 | - | - | - | - | 2 | 0.034 ～ 0.75 | - | - | - | - | - |
| Holding torque (classification)(N·m) | 0.1 or Less ～ ~10 | 0.1 or Less ～ ~15 | 0.1 or Less | ~0.4 ～ ~1.9 | 0.1 or Less ～ ~3 | 0.1 or Less ～ ~3 | 0.1 or Less ～ ~3 | ~0.2 ～ ~4 | 0.1 or Less ～ ~0.9 | ~0.2 ～ ~0.4 | ~1.2 ～ ~1.8 | ~15 | 0.1 or Less | ~0.3 ～ ~0.9 | 0.1 or Less ～ ~0.8 | 0.1 or Less ～ ~3 | ~0.3 ～ ~1.4 | ~4 ～ ~10 | ~4 | ~30 |
Loading...
Configure
Specification/Dimensions
-
Type Details
- Motors
- Built-in Driver
- Single Driver
- Motor Only
- Set
-
Type
- Set
- Motor Only
- Driver Only
-
Square Flange Size A(mm)
-
Power Supply
-
Voltage Specifications
-
Control Method
- Open Loop
- Closed Loop
-
Step Angle(°)
-
Reducer
- Not Provided
- Provided
-
Drive Method
-
Backlash(°)
-
Holding torque (classification)(N·m)
- 0.1 or Less
- ~0.2
- ~0.3
- ~0.4
- ~0.5
- ~0.6
- ~0.7
- ~0.8
- ~0.9
- ~1
- ~1.1
- ~1.2
- ~1.3
- ~1.4
- ~1.5
- ~1.6
- ~1.7
- ~1.8
- ~1.9
- ~2
- ~3
- ~4
- ~5
- ~10
- ~15
- ~20
- ~30
- ~40
- ~60
- ~80
- Up to 110
* -0.2 represents > 0.1/≤ 0.2.
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
Related Categories to Stepping Motors
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy