(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Clutches, Brakes（Function：Controller）
| Days to Ship |
|
|---|
-
OGURA CLUTCH
The powder and hysteresis type clutch and brake run based on energization, so the torque will fluctuate if the current values fluctuate when using general low voltage controls. The constant current controls require resistance values to be set for the load that is connect to the controller.
Standard Price: MYR 1,023.26- Days to Ship: 4 Day(s) or more -
Tension Controller for Feedback
OGURA CLUTCH
Compares the set values with the tensile strength measured by the tensile strength detector and then eliminates any differences by adding torque (current value) to the powder or hysteresis type clutch, which allows it to suppress fluctuation in tensile strength resulting from reel diameter or disturbances.
Standard Price: MYR 2,186.42- Days to Ship: 12 Day(s) or more -
Pulse Count Type Tension Controller
OGURA CLUTCH
Calculates the reel diameter based on pulse signal input to control so that the diameter fluctuation estimation will remain constant, which makes it possible to suppress fluctuation in tensile strength that would otherwise be caused by the reel diameter. The control output performs constant power controls so that there will be no effect from the rising coil temperature and to obtain a consistent tensile strength.
Standard Price: MYR 2,378.15 Days to Ship: 13 Day(s) or more -
Permanent Wave Hysterics Torque Controller
OGURA CLUTCH
Can save energy because it does not require an outside power supply or wiring. A long type with no areas that can incur abrasion due to the mechanical non-contact structure, which makes maintenance easy.
- CAD ：
- 2D
Standard Price: MYR 978.57- Days to Ship: 9 Day(s) or more -
Digital Setting Constant Current Controller
OGURA CLUTCH
Ideal for automated devices and large equipment that use a system to control set values. The constant current controls require resistance values to be set for the load that is connect to the controller.
Standard Price: MYR 2,051.38- Days to Ship: 6 Day(s) or more -
Tension Setting Device for CTP
OGURA CLUTCH
The CTP1200/3200 operation has a run setting that calculates the reel diameter from the pulse signal input for each rotation and each set value and changes the control output to maintain a constant tensile strength, a stop setting that retains the previous control output, and a Sakae motor off setting that blocks control output.
Standard Price: MYR 1,879.46 Days to Ship: 12 Day(s) or more
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Function |
| Type |
| Operating Condition |
| Max. Operating Rotational Speed(rpm) |
| Rated Torque (Range)(N･m) |
|
|
|
|
|
| |
| Brand | OGURA CLUTCH | OGURA CLUTCH | OGURA CLUTCH | OGURA CLUTCH | OGURA CLUTCH | OGURA CLUTCH |
| Product Series | ||||||
| CAD |
| |||||
| Days to Ship | 4 Day(s) or more | 12 Day(s) or more | 13 Day(s) or more | 9 Day(s) or more | 6 Day(s) or more | 12 Day(s) or more |
| Function | Controller | Controller | Controller | Controller | Controller | Controller |
| Type | - | - | - | Magnets | - | - |
| Operating Condition | - | - | - | Dry | - | - |
| Max. Operating Rotational Speed(rpm) | - | - | - | 700 ～ 10000 | - | - |
| Rated Torque (Range)(N･m) | - | - | - | 0.1 ~ 30 / Less Than 0.1 | - | - |
Loading...
Configure
Specification/Dimensions
-
Function
- Clutch
- Brake
- Clutch Unit
- Clutch and Brake Unit
- Power Supply Units
- Limiter
- Controller
- Coupling
-
Type
-
Operating Condition
-
Max. Operating Rotational Speed(rpm)
-
Rated Torque (Range)(N･m)
- 0.1 ~ 30
- 30.1 ~ 60
- 60.1 ~ 200
- 200.1 ~ 2500
- Less Than 0.1
- 2500.1 ~ 5000
- 5000.1 ~ 10000
Narrow search by specifying Manufacturer
-
- OGURA CLUTCH (6)
- SINFONIA (0)
- MIKI PULLEY (0)
- CKD (0)
- MIGHTY (0)
- TOK BEARING (0)
- SANKYOSEISAKUJO (0)
CAD
-
- 2D
- 3D
Related Categories to Clutches, Brakes
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy