(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Contact Switches（Type：Anglular Misalignment Tolerant Type）
| Days to Ship |
|
|---|
-
Contact Switches/Wide Contact Angle Type
MISUMI
Ball bearings allow contact from all directions
- Volume Discount
Standard Price: MYR 289.18 Days to Ship: 2 Day(s) -
METROL
[Features]
A mini switch of ø8×8 mm, that is small in size, having quench stopper.
· Suitable for confined spaces
· Miniaturization of equipment and appliance which is cost-effective
· For straight and deflected angle
· The movable part will move frictionless on the flat spring and hence galling of the movable parts does not occur.
· The waterproof type (IP67) is not only for the movable part, but the surface of the stopper and the interior of the rubber boot is also dust proof.
· The standard size of the mounted parts is so accurate that replacement is very easy.- CAD ：
- 2D
Standard Price: MYR 130.86- Days to Ship: 4 Day(s) or more -
CS-Touch Switch for Deflection CSH
METROL
[Features]
A linear bushing is used for the bearing· and it is applicable to sliding, deflection and off-set- CAD ：
- 2D
Standard Price: MYR 277.57- Days to Ship: 2 Day(s) or more -
Heat Resistant Switch HT Series
METROL
[Features]
The maximum temperature for continuous operation lies at 150°C/200°C
Plastic parts that are heat-resistant, adhesives for high temperature and heat-resistant chord have been used.Standard Price: MYR 766.74 Days to Ship: 4 Day(s) or more -
CS-Touch Switch for Declination Waterproof Type CSHP
METROL
[Features]
· M8 ultra-fine. Positioning at the deflected angle with waterproof specifications.- CAD ：
- 2D
Standard Price: MYR 469.75- Days to Ship: 4 Day(s) or more -
Switch for Determining Defective Products
METROL
[Features]
· Low cost and also useful in determining the defective products.
· Cost effective since sequencer is not required.
· The range that has been approved can also be adjusted.Standard Price: MYR 1,160.51 Days to Ship: 4 Day(s) or more
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Contact Section Type |
| Main Body Shape |
| Type |
| Contact Stroke S(mm) |
| Contact Point Type |
| Repeatability |
| Body Material |
| Contact Material |
| Environment |
| Cylinder Outer Dia. D(mm) |
| Mounting Screw Nominal M |
| Switch Operating Point P(mm) |
| Contact Section O.D. |
|
|
|
|
|
| |
| Brand | MISUMI | METROL | METROL | METROL | METROL | METROL |
| Product Series | ||||||
| CAD |
|
|
|
| ||
| Days to Ship | 2 Day(s) | 4 Day(s) or more | 2 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more |
| Contact Section Type | Spherical | Needle | Spherical | Needle | Needle | Needle |
| Main Body Shape | Bolt | Bolt / Standard | Bolt | Bolt | Bolt | Standard |
| Type | Anglular Misalignment Tolerant Type | Anglular Misalignment Tolerant Type | Anglular Misalignment Tolerant Type | Anglular Misalignment Tolerant Type | Anglular Misalignment Tolerant Type | Anglular Misalignment Tolerant Type |
| Contact Stroke S(mm) | 2.8 | 0.5 | 2.8 | 0.8 | 2.8 | 3 |
| Contact Point Type | Contact Point Normally Open | Contact Point Normally Open | Contact Point Normally Open / Contact Point Normally Closed | Contact Point Normally Open | Contact Point Normally Open / Contact Point Normally Closed | - |
| Repeatability | 5µm or Less | 0.01mm or Less | 5µm or Less | 0.01mm or Less | 5µm or Less | 3µm or Less |
| Body Material | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel |
| Contact Material | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Carbide |
| Environment | Standard | Drip-Proof | Standard | Heat Resistant | Waterproof | Waterproof |
| Cylinder Outer Dia. D(mm) | - | 8 | - | - | - | - |
| Mounting Screw Nominal M | M12 x 1.0 (Fine) | M10 x 0.75 (Fine) | M12 x 1.0 (Fine) | M6 x 1.0 (Coarse) | M8 x 0.5 (Fine) | - |
| Switch Operating Point P(mm) | 0.3 | 0.25 | 0.3 | 0.5 | 0.3 | 0.3 |
| Contact Section O.D. | ~ Ø10 | ~ Ø4 | ~ Ø10 | ~ Ø4 | - | ~ Ø2 |
Loading...
Configure
Specification/Dimensions
-
Contact Section Type
- Flat
- Needle
- Spherical
-
Main Body Shape
-
Type
-
Contact Stroke S(mm)
-
Contact Point Type
- Contact Point Normally Open
- Contact Point Normally Closed
- No Contact Point, NPN Open Collector
- No Contact Point, PNP Open Collector
-
Repeatability
-
Body Material
- Stainless Steel
- Plastic
- Aluminum
- Zinc Alloy
- BsBM Ni plating
-
Contact Material
- Stainless Steel
- Polyacetal
- Carbide
-
Environment
- Standard
- Drip-Proof
- Waterproof
- Heat Resistant
- Vacuum
-
Cylinder Outer Dia. D(mm)
-
Mounting Screw Nominal M
-
Switch Operating Point P(mm)
-
Contact Section O.D.
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
Related Categories to Contact Switches
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy