(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Indexing Plungers（Page2）
Type (Details)
-
Standard Price: MYR 66.42- Days to Ship: 6 Day(s) -
NABEYA BI-TECH
[Features]
● Simple structure index plunger.
● Pull the knob and rotate it 90° to lock the pin in the retracted position.
● To release the lock, pull the knob slightly and rotate it 90°.
● The built-in spring forces it to return to its original position.
● Excellent cost performance.
● Standardized pin diameters are Φ3 to Φ10, and main body screw diameters are M6 to M16. M6 to M12 are available in coarse and fine threads.Standard Price: MYR 53.28- Days to Ship: 2 Day(s) or more -
IMAO
A standard index plunger.
[Features]
● The nose retraction position is easily set and released by pulling the knob.
● When you release the knob on this hand-operated index plunger, the built-in spring returns the nose to its original position.
● Heat resistant up to temperatures of 80°C.
[Applications]
● Indexing and positioning.
● Pillar stopper.Standard Price: MYR 119.20- Days to Ship: 2 Day(s) or more -
Index Plunger (Nose-Lock Type) (NDXN-L)
IMAO
A nose-lock type for holding the pin in its retracted position. Available in different nose types: hardened, non-hardened, and stainless steel.
[Features]
· Hand-operated spring plungers. The nose is easily retracted by pulling on the knob. By releasing the knob, the built-in spring returns the nose to its original position.
· The nose-lock locks the nose in its retracted position by rotating the knob 90 degrees while it is extended.Standard Price: MYR 79.65- Days to Ship: 5 Day(s) or more -
IMAO
No hexagonal part for mounting in confined spaces. Installed using a dedicated wrench (SDX).
[Features]
· Hand-operated spring plungers. The nose is easily retracted by pulling on the knob. By releasing the knob, the built-in spring returns the nose to its original position.Standard Price: MYR 65.91- Days to Ship: 7 Day(s) or more -
IMAO
[Features]
· Hand-operated indexing plungers. The nose retraction position is easily released by pulling the keyring. By releasing the keyring, the built-in spring returns the nose to its origin. A cable can be attached to the keyring for remote operation, etc.Standard Price: MYR 86.31- Days to Ship: 5 Day(s) or more -
Index Plunger (Tapered / High Position Type)
IMAO
[Features]
· A hand-operated indexing plunger. The nose is easily retracted by pulling on the knob. By releasing the knob, the built-in spring returns the nose to its original position.
· High-position type.
· Use together with the dedicated bushings.Standard Price: MYR 228.20- Days to Ship: 7 Day(s) or more -
Indexing Plungers-Knobless Type
MISUMI
[Features]You can use it by attaching a knob according to usage environment.
- Volume Discount
Standard Price: MYR 55.99- Days to Ship: 2 Day(s) or more -
Indexing Plungers-Plastic Knob/Return and Rest Position Type
MISUMI
[Applications]The pin can be pushed in/out manually by using a knob or lever. Suitable for tentative workpiece positioning.
- Volume Discount
Standard Price: MYR 66.17- Days to Ship: 1 Day(s) or more -
Indexing Plungers - Short Threaded, Aluminum Knob
MISUMI
[New product]In addition to fine thread threads, you can now select coarse thread threads.
- Volume Discount
Standard Price: MYR 55.05- Days to Ship: 1 Day(s) or more -
NABEYA BI-TECH
[Features]
· Index plunger to control the coming and going of the pin by turning the lever.
· Standardized three types of operational variations.
■ [PDV-A] [PDV-AK]-Standard Type
· The pin retracts into the body by turning the lever 90°.
· Turn the lever slightly and the pin returns to its original position via the action of the integrated spring.
■ [PDV-B] [PDV-BK]-Retention Type
· The pin retracts into the body by turning the lever 120°.
· The pin will not return, even if the lever is released while in the 120° position.
· Turn the lever slightly in the opposite direction and the pin will returned to its original position via the action of the integrated spring.
■ [PDV-C] [PDV-CK]-Lock Function Type
· The pin retracts into the body turning the lever 120°.
· The guide pin then fits into the slot on the main body, locking the unit with the pin retracted.
· To unlock, pull the lever out slightly and rotate it in the opposite direction.
· Turn the lever slightly and the pin returns to its original position via the action of the integrated spring.
■ [PDV-A] [PDV-B][PDV-C]-Without Lock Nut
· Use loosening prevention service.
■ [PDV-AK] [PDV-BK][PDV-CK]-With Lock Nut for Fixing.Standard Price: MYR 302.40- Days to Ship: 5 Day(s) or more -
NABEYA BI-TECH
[Features]
· A flanged type indexing plunger that is mounted using countersunk bolts and rivets etc.
· The long pin type PFX-H-A (long pin type) is ideal for mounting thick panels and frames etc.
· The pin has undergone hardening and offers excellent abrasion resistance.Standard Price: MYR 101.61- Days to Ship: 5 Day(s) or more -
NABEYA BI-TECH
[Features]
·Made of stainless steel. Excellent corrosion resistance.
·It is an indexing plunger that controls the entry and exit of the pin by turning the lever.
·When the lever is rotated 180°, the pin goes inside the main body.
·The lever can be locked by the notch machined in the main body.
·Coarse thread and fine thread are standardized for all pin diameters.Standard Price: MYR 176.45- Days to Ship: 5 Day(s) or more -
IMAO
Classic indexing plungers for excellent cost-performance. Available in different nose types: hardened, non-hardened, and stainless steel.
[Features]
· Hand-operated spring plungers. The nose is easily retracted by pulling on the knob. By releasing the knob, the built-in spring returns the nose to its original position.Standard Price: MYR 69.83- Days to Ship: 4 Day(s) or more -
IMAO
The operating part can be operated remotely by screw connection. No hexagonal part for mounting in confined spaces. Available in steel and stainless steel.
[Features]
· Hand-operated spring plungers. The nose is easily retracted by pulling on the knob. By releasing the knob, the built-in spring returns the nose to its original position.
· The operating threads can be connected for remote operation, etc.Standard Price: MYR 85.37- Days to Ship: 9 Day(s) -
IMAO
An index plunger with outstanding cost performance.
[Features]
● Pull the lever to retract the nose.
● Turn the lever to keep the nose in the retracted position.
● Main body (SUM22L, zinc plating).
[Applications]
● Ideal for temporary fixing of workpieces.Standard Price: MYR 85.63- Days to Ship: 4 Day(s) or more -
Standard Price: MYR 126.70- Days to Ship: 6 Day(s) or more -
Standard Price: MYR 75.34- Days to Ship: 6 Day(s) or more -
Index Plunger (Straight, High Position Type)
IMAO
[Features]
· A hand-operated indexing plunger. The nose is easily retracted by pulling on the knob. By releasing the knob, the built-in spring returns the nose to its original position.
· High-position type.
· Use together with the dedicated bushings.Standard Price: MYR 222.19- Days to Ship: 7 Day(s) or more -
Indexing Plungers-Compact Type/Knobless
MISUMI
Suitable knob for each purpose can be mounted.
- Volume Discount
Standard Price: MYR 53.34- Days to Ship: 1 Day(s) or more -
NABEYA BI-TECH
The index plunger and mounting flange are integrated.
[Features]
● Suitable for mounting to the wall of equipment and devices.
● Please use commercially available hexagon socket bolts for mounting.
● If you use the long hole, you can adjust the position after mounting.
● The type of operation part can be selected by the product code.
[Applications]
● Positioning of the workpiece.Standard Price: MYR 76.49- Days to Ship: 2 Day(s) or more -
NABEYA BI-TECH
It is a compact type indexing plunger.
[Features]
·Comes with a lock mechanism.
·Pull the knob and rotate it 30° to lock the pin retracted.
·The lock is released by pulling the knob out slightly and turning it 30°.
·The built-in spring returns the pin to its original position.
·The locking mechanism is built into the knob.
·The total length L is the same as PHX and PHXS without a lock mechanism.
·The knobs of PHY-RD and PHYS-RD are red.
·This makes the knob stand out, so it can be used to clarify operation location and work procedures.
·The pins are nickel-plated and have excellent abrasion resistance.
[Applications]
·Workpiece positioning application.Standard Price: MYR 73.56- Days to Ship: 5 Day(s) or more -
NABEYA BI-TECH
[Features]
· A flanged type indexing plunger that is mounted using countersunk bolts and rivets etc.
· The long pin type PFY-H-A is ideal for mounting thick panels and frames etc.
· Pull out the knob and rotate 90° to lock with the pin in a retracted state. · To unlock, pull the knob out slightly and rotate it 90°. · Returns to its original position via the action of the integrated spring.
· The lock mechanism is integrated into the knob. Therefore, the overall length is the same as that of the PFX, which does not have a lock mechanism.
· The pin has undergone hardening and offers excellent abrasion resistance.Standard Price: MYR 111.90- Days to Ship: 2 Day(s) or more -
Index Plunger (Long Stroke) (NDXNE)
IMAO
Long nose for deep insertion. Available in steel and stainless steel.
[Features]
· Hand-operated spring plungers. The nose is easily retracted by pulling on the knob. By releasing the knob, the built-in spring returns the nose to its original position.Standard Price: MYR 91.44- Days to Ship: 7 Day(s) or more -
Indexing Plungers Flange Type IPF
KONISHI
Pulling the knob retracts the center pin; releasing it returns it to its original position via spring force. An index plunger with a fixed countersunk screw.
- CAD ：
- 2D
Standard Price: MYR 108.21- Days to Ship: 6 Day(s) or more -
Standard Price: MYR 75.31- Days to Ship: 6 Day(s) or more -
Indexing Plungers Flange Type (with Lock Function) IPFL
KONISHI
Pulling the knob and rotating it 90° locks the product with the center pin in a retracted state. Returning the knob to its original position releases the lock and the center pin returns to its original position. Flat head screw fixed type indexing plungers.
- CAD ：
- 2D
Standard Price: MYR 130.57- Days to Ship: 6 Day(s) or more -
Indexing Plunger (Stainless Steel) IP-1-Sus
KONISHI
Pulling the knob retracts the center pin; releasing it returns it to its original position via spring force. Use to calculate and adjust jig positions.
- CAD ：
- 2D
Standard Price: MYR 88.55- Days to Ship: 6 Day(s) or more -
Engineering Plastic Index Plunger (Nose-Lock Type) (EGIP)
IMAO
[Features]
· Lightweight body made from plastic.
· The EGIP-SUS and EGIW-SUS types are optimal for places that are intolerant to rust.Standard Price: MYR 67.50- Days to Ship: 7 Day(s) or more -
MISUMI
[Applications]Indexing plunger press fit type. Please drive it into from the top of the press-fit collar.
- Volume Discount
Standard Price: MYR 88.50- Days to Ship: 4 Day(s) or more -
Knob for Press Fit Indexing Plunger
MISUMI
[Applications]This knob can be used for the indexing plunger press fit type.
- Volume Discount
Standard Price: MYR 24.25- Days to Ship: 1 Day(s) or more -
Standard Price: MYR 9.74- Days to Ship: 6 Day(s) -
Standard Price: MYR 17.06- Days to Ship: 6 Day(s) -
NABEYA BI-TECH
[Features]
·The indexing plunger and mounting flange are integrated.
·Suitable for mounting to the wall of machinery or equipment.
·The pin can be locked in its retracted position by turning the knob 90° while it is extended.
·To unlock, pull the knob slightly and rotate it 90 degrees.
·It returns to its original state by the force of the built-in spring.
·Use commercially available hex socket head cap screw, etc., for mounting.
·Using a slotted hole allows positioning adjustment after mounting.
[Applications]
·Workpiece positioning application.Standard Price: MYR 82.29- Days to Ship: 2 Day(s) or more -
NABEYA BI-TECH
[Features]
· A new type of indexing plunger.
· Features a lock mechanism.
· The PDX-A/AK, with knob, have been standardized.
· For the PDX-A/AK, pin insertion is controlled via the knob.
· Turning the knob 90° clockwise after pulling it out allows the guide pin to fit into the slot, locking the unit with the pin retracted.
· To unlock, pull the knob out slightly and rotate it 90° counterclockwise.
· Returns to its original position via the action of the integrated spring.Standard Price: MYR 212.23- Days to Ship: 7 Day(s) or more -
NABEYA BI-TECH
[Features]
- Compact indexing plunger.
- Metal part unexposed after mounting.
- Nickel-plated pin.
- Superior abrasion resistance.Standard Price: MYR 70.26- Days to Ship: 5 Day(s) or more -
Standard Price: MYR 395.51- Days to Ship: 8 Day(s) or more -
NABEYA BI-TECH
Short type that can be mounted directly to a thin frame.
Standard Price: MYR 106.11- Days to Ship: 5 Day(s) or more -
NABEYA BI-TECH
The pin can be locked in its retracted position by pulling and rotating the knob 90 degrees. To unlock, pull the knob slightly and rotate it by 90 degrees. The built-in spring returns the pin to its origin.
Standard Price: MYR 118.32- Days to Ship: 5 Day(s) or more -
NABEYA BI-TECH
Indexing or positioning pin. Good abrasion resistance.
[Features]
- Indexing or positioning pin.
- New standards for [PXXS-S] and [PXXS-SK] with stainless steel knobs.
- Pin is hardened (steel) or nickel-plated (stainless steel). Excels in abrasion resistance.
- If the threaded part is too long for the mounting surface, use the [PXC] indexing plunger collar instead.
- Use a locking service for fixing indexing plungers.Standard Price: MYR 90.90- Days to Ship: 5 Day(s) or more -
NABEYA BI-TECH
The pin can be locked in its retracted position by pulling and rotating the knob 90 degrees. To unlock, pull the knob slightly and rotate it by 90 degrees. The built-in spring returns the pin to its origin.
Standard Price: MYR 126.27- Days to Ship: 2 Day(s) or more -
NABEYA BI-TECH
[Features]
- A new type of indexing plunger.
- Pin usually retracted in the main unit.
- With lock mechanism.
- The knob-type PCX-A/AK and the key-type PCX-B/BK are standardized.Standard Price: MYR 209.95- Days to Ship: 5 Day(s) or more -
NABEYA BI-TECH
Two types of standardized stroke for each pin diameter. For indexing or positioning.
[Features]
- Two types of standardized stroke for each pin diameter (except for ⌀10 and ⌀12).
- For indexing or positioning.
- Pin is hardened (steel) or nickel-plated (stainless steel). Excellent abrasion resistance.
- If the threaded part is too long for the mounting surface, use the PXC indexing plunger collar instead.Standard Price: MYR 63.30- Days to Ship: 5 Day(s) or more -
NABEYA BI-TECH
[Features]
- Indexing plunger for accurate positioning.
- H7 pin diameter tolerance.
- G6 hole tolerance recommended for the mating side.
- Use with the positioning bushings for precise positioning.Standard Price: MYR 323.59- Days to Ship: 8 Day(s) or more -
NABEYA BI-TECH
[Features]
- Indexing plunger that can be mounted on a thin plate.
- Optimal for positioning and fixing the cases/covers of electronic/communication equipment.
- Fixing nut can be removed.
- Mount with a plate clamped with the fixing nut.
- Two types of pin lengths standardized for each pin diameter.
- Nickel-plated pin.
- Superior abrasion resistance.Standard Price: MYR 200.56- Days to Ship: 8 Day(s) or more
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Type (Details) |
| Type |
| Outer Dia. M(mm) |
| Tip Outer Dia. d(Ø) |
| Mounting Method |
| Stroke S(mm) |
| Locking Mechanism |
| Mounting Method (Details) |
| Body Material |
| Length L(mm) |
| Main Body Material |
| Overall Length |
| Tip Material |
| All Stainless |
| Tip Surface Treatment |
| Tip Heat Treatment |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | NABEYA BI-TECH | IMAO | IMAO | IMAO | IMAO | IMAO | MISUMI | MISUMI | MISUMI | NABEYA BI-TECH | NABEYA BI-TECH | NABEYA BI-TECH | IMAO | IMAO | IMAO | KONISHI | KONISHI | IMAO | MISUMI | NABEYA BI-TECH | NABEYA BI-TECH | NABEYA BI-TECH | IMAO | KONISHI | KONISHI | KONISHI | KONISHI | IMAO | MISUMI | MISUMI | MISUMI | MISUMI | NABEYA BI-TECH | NABEYA BI-TECH | NABEYA BI-TECH | NABEYA BI-TECH | NABEYA BI-TECH | NABEYA BI-TECH | NABEYA BI-TECH | NABEYA BI-TECH | NABEYA BI-TECH | NABEYA BI-TECH | NABEYA BI-TECH | NABEYA BI-TECH |
| Product Series | Indexing Plungers-Plastic Knob/Return and Rest Position Type | ||||||||||||||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Days to Ship | 6 Day(s) | 2 Day(s) or more | 2 Day(s) or more | 5 Day(s) or more | 7 Day(s) or more | 5 Day(s) or more | 7 Day(s) or more | 2 Day(s) or more | 1 Day(s) or more | 1 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 4 Day(s) or more | 9 Day(s) | 4 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 7 Day(s) or more | 1 Day(s) or more | 2 Day(s) or more | 5 Day(s) or more | 2 Day(s) or more | 7 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 7 Day(s) or more | 4 Day(s) or more | 1 Day(s) or more | 6 Day(s) | 6 Day(s) | 2 Day(s) or more | 7 Day(s) or more | 5 Day(s) or more | 8 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 2 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more |
| Type (Details) | Vertical-Flanged | - | Standard Knob | Standard Knob | Standard Knob | With Ring | Standard Knob | W/o Knob | Standard Knob | Standard Knob | Lever Type | Standard Knob | - | Standard Knob | W/o Knob | Lever Type | Special Knobs | W/o Knob | Standard Knob | W/o Knob | - | Standard Knob | - | Standard Knob | Standard Knob | W/o Knob | Standard Knob | Standard Knob | Lever Type | W/o Knob | W/o Knob | Related Components | W/o Knob | Standard Knob / Vertical-Flanged | Standard Knob / Special Knobs | Standard Knob | - | Standard Knob | Standard Knob | Standard Knob / W/o Knob | - | Standard Knob / Special Knobs | - | Standard Knob | Standard Knob |
| Type | - | Standard Knob | - | - | - | - | - | - | - | Standard Knob | - | - | Lever Type | - | - | - | - | - | - | - | Standard Knob / With Ring | - | Standard Knob | - | - | - | - | - | - | - | - | - | - | - | - | - | Standard Knob | - | - | - | Standard Knob | - | Standard Knob / Without Knob | - | - |
| Outer Dia. M(mm) | - | 6 ～ 16 | 10 ～ 20 | 6 ～ 20 | 4.5 ～ 20 | 8 ～ 30 | 10 ～ 30 | 10 ～ 16 | 12 ～ 16 | 12 ～ 16 | 16 | 10 ～ 12 | 10 ～ 20 | 6 ～ 20 | 8 ～ 20 | 6 ～ 16 | 12 ～ 20 | 10 ～ 16 | 10 ～ 30 | 8 ～ 16 | 6 ～ 14.5 | 8 ～ 10 | 10 ～ 12 | 6 ～ 20 | 10 ～ 12 | 10 ～ 20 | 10 ～ 12 | 8 ～ 16 | 12 ～ 16 | 8 ～ 15 | 3 ～ 8 | - | 10 ～ 16 | 6 ～ 14.5 | 12 ～ 16 | 8 ～ 10 | - | 12 ～ 16 | 12 ～ 16 | 10 ～ 20 | 10 ～ 20 | 12 ～ 16 | 8 ～ 20 | - | 10 ～ 12 |
| Tip Outer Dia. d(Ø) | 8 ～ 14 | 3 ～ 10 | 5 ～ 10 | 3 ～ 10 | 3 ～ 10 | 4 ～ 10 | 5 ～ 10 | 5 ～ 8 | 6 ～ 8 | 6 ～ 8 | 6 ～ 10 | 6 ～ 8 | 4 ～ 12 | 3 ～ 10 | 4 ～ 10 | 4 ～ 10 | 6 ～ 10 | 5 ～ 8 | 5 ～ 10 | 4 ～ 8 | 4 ～ 10 | 4 ～ 7 | 6 ～ 8 | 3 ～ 10 | 6 ～ 8 | 5 ～ 10 | 6 ～ 8 | 4 ～ 8 | 6 ～ 8 | 4 ～ 8 | - | - | 5 ～ 8 | 4 ～ 10 | 6 ～ 8 | 4 ～ 7 | 8 ～ 10 | 6 ～ 8 | 6 ～ 8 | 5 ～ 10 | 5 ～ 10 | 6 ～ 8 | 4 ～ 12 | 8 ～ 10 | 6 ～ 8 |
| Mounting Method | - | - | - | - | - | - | - | - | - | Screw-in | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Stroke S(mm) | 14 | 3.5 ～ 10 | 5 ～ 10 | 3.5 ～ 10 | 3.5 ～ 10 | 4 ～ 10 | 5 ～ 10 | 5 ～ 8 | 6 ～ 8 | 6 ～ 7 | 8 | 6 ～ 8 | 6 ～ 12 | 3.5 ～ 10 | 4 ～ 10 | 9.5 ～ 25 | 6 ～ 10 | 5 ～ 8 | 5 ～ 10 | 4 ～ 12 | 4 ～ 10 | 5 ～ 7 | 6 ～ 8 | 5 ～ 15 | 6 ～ 18 | 5 ～ 10 | 6 ～ 18 | 4 ～ 8 | 8 ～ 10 | 4 ～ 12 | - | - | 5 ～ 8 | 4 ～ 8 | 8 ～ 10 | 5 ～ 7 | 10 ～ 12 | 6 ～ 8 | 6 ～ 8 | 5 ～ 10 | 5 ～ 10 | 8 ～ 10 | 4 ～ 15 | 10 ～ 12 | 6 ～ 7.5 |
| Locking Mechanism | Nose Lock | Nose Lock | Not Provided | Nose Lock | Not Provided / Returning | Returning | Returning | - | Nose Lock | Nose Lock / Returning | Not Provided / Nose Lock | Not Provided | Nose Lock | Not Provided | Not Provided | Nose Lock | Not Provided | Not Provided | Returning | - | Returning | Nose Lock | Nose Lock | Returning | Not Provided | Not Provided | Nose Lock | Not Provided | Nose Lock | - | - | - | Returning | Nose Lock | Nose Lock | Not Provided | Nose Lock | Not Provided | Nose Lock | Not Provided | Nose Lock | Nose Lock | Returning | Not Provided | Not Provided |
| Mounting Method (Details) | Flange | Screw-In | Screw-In | Screw-In | Screw-In | Screw-In | Screw-In | Screw-In | Screw-In | Screw-In | Screw-In | Flange | Screw-In | Screw-In | Screw-In | Screw-In | Screw-In | Screw-In | Screw-In | Screw-In | Flange | Screw-In | Flange | Screw-In | Flange | Screw-In | Flange | Screw-In | Screw-In | Press Fit | Press Fit | - | Screw-In | Flange | Screw-In | Screw-In | Flange | Screw-In | Screw-In | Screw-In | Screw-In | Screw-In | Screw-In | Flange | Screw-In |
| Body Material | Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel | Steel | Steel | Zinc Diecast | Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel | Steel | Steel | Steel / Stainless Steel | Steel / Stainless Steel | Zinc Diecast | Steel / Stainless Steel | Zinc Diecast | Steel / Stainless Steel | Zinc Diecast | Steel | Zinc Diecast | Stainless Steel | Polyamide | Stainless Steel | Others | - | Steel / Stainless Steel | Zinc Diecast | Steel | Steel / Stainless Steel | Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel | Steel / Stainless Steel | Steel | Steel |
| Length L(mm) | 54 | 32.5 ～ 72.5 | 47 ～ 80 | 31.5 ～ 74 | 31.5 ～ 74 | 40 ～ 78 | 43.5 ～ 74 | 33 ～ 54 | 45 ～ 54 | 48 ～ 56 | 59 | 37 ～ 54 | 37.5 ～ 71 | 31.5 ～ 74 | 32 ～ 62 | 41.5 ～ 102.5 | 65 ～ 92 | 33 ～ 54 | 43.5 ～ 74 | 30 ～ 54 | 30.5 ～ 71 | 26.5 ～ 34 | 37 ～ 54 | 33 ～ 79 | 37 ～ 54 | 33 ～ 63 | 37 ～ 54 | 39 ～ 71 | 51 ～ 61 | 32 ～ 57 | - | - | 33 ～ 54 | 33 ～ 72.5 | 51 ～ 62 | 26.5 ～ 34 | 71 ～ 83 | 45 ～ 54 | 45 ～ 54 | 33 ～ 80 | 51 ～ 91 | 43 ～ 64.5 | 32 ～ 82 | 71 ～ 75 | 44.5 ～ 52 |
| Main Body Material | - | - | - | - | - | - | - | - | - | Steel | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Overall Length | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Short | Short | Standard | Short | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard / Short | Short | Short | Standard | Short | Standard | Short | Standard | Standard | Standard | Standard | - | Standard | Short | Standard | Short | Short | Short | Standard | Standard | Standard | Standard | Standard | Short | Short |
| Tip Material | Steel | Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Stainless Steel / S45C | S45C | Steel | Stainless Steel | Steel | Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel | Steel | Steel | Steel / Stainless Steel | Stainless Steel / S45C | Stainless Steel | Stainless Steel | Steel | Steel / Stainless Steel | Steel | Steel | Steel | Stainless Steel | Steel / Stainless Steel | Stainless Steel | - | - | Steel / Stainless Steel | Stainless Steel | Steel | Stainless Steel | Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel | Steel / Stainless Steel | Steel | Stainless Steel |
| All Stainless | - | Not Compliant | Not Compliant | Not Compliant | Not Compliant | Not Compliant | Not Compliant | Applicable / Not Compliant | Not Compliant | Not Compliant | Not Compliant | Not Compliant | Applicable / Not Compliant | Not Compliant | Not Compliant | Not Compliant | Not Compliant | Not Compliant | Not Compliant | Applicable / Not Compliant | Not Compliant | Not Compliant | Not Compliant | Not Compliant | Not Compliant | Not Compliant | Not Compliant | Not Compliant | Not Compliant | Applicable / Not Compliant | - | - | Applicable / Not Compliant | Not Compliant | Not Compliant | Not Compliant | Not Compliant | Not Compliant | Not Compliant | Applicable / Not Compliant | Applicable / Not Compliant | Not Compliant | Not Compliant | Not Compliant | Not Compliant |
| Tip Surface Treatment | Zinc Plating | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Black Oxide / Nickel Plating | Black Oxide | Black Oxide | Not Provided | Not Provided | Not Provided / Nickel Plating | Not Provided | Not Provided | Others | Not Provided | Not Provided | Not Provided | Not Provided / Black Oxide | Not Provided | Trivalent Chromate | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | - | - | Not Provided | Not Provided | Not Provided | Not Provided / Nickel Plating | Not Provided | Not Provided / Nickel Plating | Not Provided / Nickel Plating | Not Provided / Nickel Plating | Not Provided / Nickel Plating | Not Provided | Not Provided / Nickel Plating | Not Provided | Nickel Plating |
| Tip Heat Treatment | Hardening | Not Provided | Hardening / Carburized | Not Provided / Hardening / Carburized | Not Provided / Hardening / Carburized | Not Provided / Hardening | Hardening / Carburized | Not Provided / Hardening | Hardening | Carburized | Not Provided | Hardening | Not Provided | Not Provided / Hardening / Carburized | Not Provided / Hardening / Carburized | Not Provided | Not Provided | Not Provided | Hardening / Carburized | Hardening | Not Provided | Not Provided | Hardening | Not Provided / Hardening / Carburized | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided / Hardening | Hardening | - | - | - | Not Provided | Hardening | Not Provided | Hardening | Not Provided / Hardening | Not Provided / Hardening | Not Provided / Hardening | Not Provided / Hardening | Hardening | Not Provided / Hardening | Hardening | Not Provided |
Loading...
Configure
Specification/Dimensions
-
Type
-
Outer Dia. M(mm)
-
Tip Outer Dia. d(Ø)
-
Mounting Method
-
Stroke S(mm)
-
Locking Mechanism
-
Mounting Method (Details)
-
Body Material
-
Length L(mm)
-
Main Body Material
-
Overall Length
-
Tip Material
-
All Stainless
-
Tip Surface Treatment
-
Tip Heat Treatment
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
Days to Ship
-
- All
- 1 Day(s) or Less
- 2 Day(s) or Less
- 4 Day(s) or Less
- 5 Day(s) or Less
- 6 Day(s) or Less
- 7 Day(s) or Less
- 8 Day(s) or Less
- 9 Day(s) or Less
- 10 Day(s) or Less
- 12 Day(s) or Less
Related Categories to Indexing Plungers
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy