(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Indexing Plungers（Tip Material：Steel Page2）
Type (Details)
-
Standard Knob -
Lever Type -
Transverse-Flanged -
With Ring -
Vertical-Flanged -
Related Components -
W/o Knob -
Special Knobs
-
NABEYA BI-TECH
Two types of standardized stroke for each pin diameter. For indexing or positioning.
[Features]
- Two types of standardized stroke for each pin diameter (except for ⌀10 and ⌀12).
- For indexing or positioning.
- Pin is hardened (steel) or nickel-plated (stainless steel). Excellent abrasion resistance.
- If the threaded part is too long for the mounting surface, use the PXC indexing plunger collar instead.Standard Price: MYR 63.30- Days to Ship: 5 Day(s) or more -
NABEYA BI-TECH
[Features]
- Indexing plunger for accurate positioning.
- H7 pin diameter tolerance.
- G6 hole tolerance recommended for the mating side.
- Use with the positioning bushings for precise positioning.Standard Price: MYR 323.59- Days to Ship: 8 Day(s) or more -
NABEYA BI-TECH
It is an indexing plunger that controls the entry and exit of the pin by turning the lever.
[Features]
·When the lever is rotated 180°, the pin goes inside the main body.
·The notch on the main body allows the lever to lock.
·The PXV-B / BK has a lever cap that fits in your hand.
·The pins have been nitrided. Highly abrasion-resistant.
·PXV-A and PXV-B have no lock nut.
·PXV-AK and PXV-BK have lock nuts for fixing.
·Coarse thread and fine thread are standardized for all pin diameters.
[Applications]
·For positioning of workpieces.
·For attaching and detaching workpieces.Standard Price: MYR 143.70- Days to Ship: 5 Day(s) or more -
NABEYA BI-TECH
[Features]
- All main body threads can be embedded in equipment; only the knob is exposed.
- Attractive look.
- Hardened (steel) or nickel-plated (stainless steel).
- Superior abrasion resistance.
- New standardization for PXZS-Z and PXZS-SK with stainless steel knob.
- Use a locking service for fixing indexing plungers.Standard Price: MYR 81.80- Days to Ship: 7 Day(s) or more -
IMAO
A nose-lock type for holding the pin in its retracted position. Available in steel and stainless steel.
Standard Price: MYR 154.60- Days to Ship: 8 Day(s) or more -
IMAO
[Features]
· No hexagonal part for mounting in confined spaces.
· Installed using a dedicated wrench (SDX-Z).
· Full thread type.Standard Price: MYR 85.68- Days to Ship: 7 Day(s) or more -
IMAO
Welding and adhesion type.
[Features]
· Hand-operated spring plungers. The nose is easily retracted by pulling on the knob. By releasing the knob, the built-in spring returns the nose to its original position.
· The nose-lock locks the nose in its retracted position by rotating the knob 90 degrees while it is extended.Standard Price: MYR 107.20- Days to Ship: 9 Day(s) -
NABEYA
Rotating the operation knob 90° enables fixation with the pin retracted.
[Features]
· Pulling and rotating the operation knob 90° enables locking with the pin retracted.
· To unlock, pull the operation knob a little and rotate it by 90°.
· Returns to its original position via internal spring action- CAD ：
- 2D
Standard Price: MYR 107.21- Days to Ship: 6 Day(s) or more -
Indexing Plungers Without Hexagonal Collar IPN, IPN-Sus
KONISHI
Pulling the knob retracts the center pin; releasing it returns it to its original position via spring force. Use to calculate and adjust jig positions. All screws are embedded into the device, only leaving the knob on the surface and making it look more attractive.
- CAD ：
- 2D
Standard Price: MYR 160.04 Days to Ship: 7 Day(s) or more -
KONISHI
By pulling the knob, the center pin will be retracted, and when you release your hand, the center pin will return to its original position due to the spring force. It can be used for indexing and positioning jigs.
- CAD ：
- 2D
Standard Price: MYR 51.74- Days to Ship: 4 Day(s) or more -
KONISHI
Pull the knob and rotate it 90° to lock the product with the center pin in retracted state. Return the knob to its original position to release the lock; the center pin returns to its original position.
- CAD ：
- 2D
Standard Price: MYR 60.25- Days to Ship: 6 Day(s) or more -
KONISHI
[Features]
・ An Indexing plunger with a grip ball glued to the knob
[Applications]
・ Convenient for jig indexing and positioning- CAD ：
- 2D
Standard Price: MYR 87.07- Days to Ship: 4 Day(s) or more -
KONISHI
Pulling the knob retracts the center pin; releasing it returns it to its original position via spring force. Use to calculate and adjust jig positions when welding or fuse mounting.
- CAD ：
- 2D
Standard Price: MYR 98.46- Days to Ship: 6 Day(s) or more -
KONISHI
Pulling the knob retracts the center pin; releasing it returns it to its original position via spring force. Use to calculate and adjust jig positions when welding or fuse mounting.
- CAD ：
- 2D
Standard Price: MYR 97.88- Days to Ship: 6 Day(s) or more -
KONISHI
Rotate the lever 180° to retract the center pin and engage the lock. Use to calculate and adjust the position of jigs.
- CAD ：
- 2D
Standard Price: MYR 240.90- Days to Ship: 5 Day(s) or more -
Indexing Plunger Short Type (with Lock Function) IPSL
KONISHI
[Features]
· Pulling the knob and rotating it by 90° locks the product with the center pin in a retracted state.
· Returning the knob to its original position releases the lock and the center pin returns to its original position.- CAD ：
- 2D
Standard Price: MYR 165.35- Days to Ship: 6 Day(s) or more -
Engineering Plastic Index Plunger (Lobed Knob Type)
IMAO
Lightweight resin body.
[Features]
· EKIP-SUS and EKIP-W-SUS types are optimal for rust-intolerant places.
· Hand-operated indexing plungers. The nose is easily retracted by pulling on the knob. By releasing the knob, the built-in spring returns the nose to its original position.Standard Price: MYR 122.97- Days to Ship: 9 Day(s) -
Index Plunger (Thin Plate Type)
IMAO
[Features]
· Hand-operated indexing plungers. The nose is easily retracted by pulling on the knob. By releasing the knob, the built-in spring returns the nose to its original position.Standard Price: MYR 104.63- Days to Ship: 9 Day(s) -
Index Plunger (Nose-Lock Type For Thin Plates) (TWDXN-L)
IMAO
[Features]
· Hand-operated indexing plungers. The nose is easily retracted by pulling on the knob. By releasing the knob, the built-in spring returns the nose to its original position.
· The nose-lock locks the nose in its retracted position by rotating the knob 90 degrees while it is extended.Standard Price: MYR 140.02 Days to Ship: 9 Day(s)
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Type (Details) |
| Type |
| Outer Dia. M(mm) |
| Tip Outer Dia. d(Ø) |
| Mounting Method |
| Stroke S(mm) |
| Locking Mechanism |
| Mounting Method (Details) |
| Body Material |
| Length L(mm) |
| Main Body Material |
| Overall Length |
| Tip Material |
| All Stainless |
| Tip Surface Treatment |
| Tip Heat Treatment |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | NABEYA BI-TECH | NABEYA BI-TECH | NABEYA BI-TECH | NABEYA BI-TECH | IMAO | IMAO | IMAO | NABEYA | KONISHI | KONISHI | KONISHI | KONISHI | KONISHI | KONISHI | KONISHI | KONISHI | IMAO | IMAO | IMAO |
| Product Series | |||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Days to Ship | 5 Day(s) or more | 8 Day(s) or more | 5 Day(s) or more | 7 Day(s) or more | 8 Day(s) or more | 7 Day(s) or more | 9 Day(s) | 6 Day(s) or more | 7 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 5 Day(s) or more | 6 Day(s) or more | 9 Day(s) | 9 Day(s) | 9 Day(s) |
| Type (Details) | - | Standard Knob | Lever Type | Standard Knob / W/o Knob | Standard Knob | Standard Knob | Standard Knob | Standard Knob | Standard Knob | Standard Knob | Standard Knob | Special Knobs | Standard Knob | W/o Knob | Lever Type | Standard Knob | Standard Knob | Standard Knob | Standard Knob |
| Type | Standard Knob / Without Knob | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Outer Dia. M(mm) | 8 ～ 20 | - | 10 ～ 20 | 10 ～ 20 | 10 ～ 20 | 10 ～ 20 | 12 ～ 22 | 10 ～ 16 | 20 | 8 ～ 16 | 8 ～ 16 | 10 ～ 20 | 12 ～ 18 | 12 ～ 18 | 16 ～ 20 | 12 ～ 16 | 24 ～ 30 | 10 | 10 |
| Tip Outer Dia. d(Ø) | 4 ～ 12 | 8 ～ 10 | 4 ～ 12 | 5 ～ 10 | 5 ～ 10 | 5 ～ 10 | 5 ～ 10 | 5 ～ 8 | 10 | 4 ～ 8 | 4 ～ 8 | 5 ～ 10 | 5 ～ 8 | 5 ～ 8 | 6 ～ 12 | 6 ～ 8 | 8 ～ 10 | 5 ～ 6 | 5 ～ 6 |
| Mounting Method | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Stroke S(mm) | 4 ～ 15 | 10 ～ 12 | 6 ～ 12 | 5 ～ 10 | 5 ～ 10 | 5 ～ 10 | 5 ～ 10 | 5 ～ 8 | 10 | 4 ～ 8 | 4 ～ 8 | 5 ～ 10 | 5 ～ 8 | 5 ～ 8 | 10 ～ 12 | 6 ～ 8 | 8 ～ 10 | 4 | 4 |
| Locking Mechanism | Returning | Not Provided | Nose Lock | Not Provided | Nose Lock | Not Provided | Not Provided / Nose Lock | Nose Lock | Not Provided | Not Provided | Nose Lock | Not Provided | Not Provided | Not Provided | Nose Lock | Nose Lock | Returning | Returning | Nose Lock |
| Mounting Method (Details) | Screw-In | Flange | Screw-In | Screw-In | Screw-In | Screw-In | Press Fit | Screw-In | Screw-In | Screw-In | Screw-In | Screw-In | Press Fit | Press Fit | Screw-In | Screw-In | Screw-In | Screw-In | Plate Mounting |
| Body Material | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Polyamide | Steel | Steel |
| Length L(mm) | 32 ～ 82 | 71 ～ 75 | 32 ～ 71 | 33 ～ 80 | 47 ～ 80 | 47 ～ 80 | 47 ～ 80 | 49 ～ 73 | 80 | 39 ～ 71 | 43 ～ 79 | 46 ～ 84 | 45 ～ 69 | 33 ～ 54 | 56 ～ 69 | 45 ～ 54 | 68 ～ 79 | 46.5 ～ 47.5 | 46.5 ～ 47.5 |
| Main Body Material | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Overall Length | Standard | Short | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Short | Standard | Standard | Standard |
| Tip Material | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel |
| All Stainless | Not Compliant | Not Compliant | Not Compliant | Not Compliant | Not Compliant | Not Compliant | Not Compliant | Not Compliant | Not Compliant | Not Compliant | Not Compliant | Not Compliant | Not Compliant | Not Compliant | Not Compliant | Not Compliant | Not Compliant | Not Compliant | Not Compliant |
| Tip Surface Treatment | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Black Oxide | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Black Oxide | Not Provided | Black Oxide | Not Provided | Not Provided |
| Tip Heat Treatment | Hardening | Hardening | Hardening | Hardening | Carburized | Carburized | Carburized | Carburized | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Hardening | Carburized | Carburized |
Loading...
Configure
Specification/Dimensions
-
Type
- Standard Knob
- Lever Type
- With Ring
- Without Knob
-
Outer Dia. M(mm)
-
Tip Outer Dia. d(Ø)
-
Mounting Method
- Screw-in
-
Stroke S(mm)
-
Locking Mechanism
-
Mounting Method (Details)
- Screw-In
- Press Fit
- Plate Mounting
- Flange
-
Body Material
- Steel
- Stainless Steel
- Zinc Diecast
- Polyamide
- Others
-
Length L(mm)
-
Main Body Material
- Steel
-
Overall Length
- Standard
- Short
-
Tip Material
- Steel
- Stainless Steel
- S45C
-
All Stainless
- Applicable
- Not Compliant
-
Tip Surface Treatment
-
Tip Heat Treatment
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
Days to Ship
-
- All
- 1 Day(s) or Less
- 2 Day(s) or Less
- 4 Day(s) or Less
- 5 Day(s) or Less
- 6 Day(s) or Less
- 7 Day(s) or Less
- 8 Day(s) or Less
- 9 Day(s) or Less
- 10 Day(s) or Less
- 12 Day(s) or Less
Related Categories to Indexing Plungers
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy