(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Locating Pins（Mounting Side Tolerance：0.005/0）
Basic Shape
-
Large Head -
Small Head -
Straight / Air Vent -
Shouldered -
Screw Mounted -
Flanged -
Double-Stepped -
Straight
-
Small Diameter Locating Pin - Straight / Small Head
MISUMI
- Small Diameter Locating Pin - Straight / Small Head from MISUMI.
- Insertion Guide Tip Type can be selected into 4 types, Tapered tip, Taper R tip, Spherical tip, and Flat tip.
- The material of locating pin can be selected 5 types, Steel SKD61, Steel SK95(SK4), Stainless Steel SUS304, Stainless Steel SUS304 Equivalent, Stainless Steel SUS440C or 13Cr.
- The outer diameter of the locating pin can be configurable up to 3 mm.
- SUS304 may not be polished.- Volume Discount
Days to Ship: 5 Day(s) or more -
Locating Pins - Small Head, Round Tapered - Press Fit
MISUMI
- Locating Pins - Small Head, Round Tapered - Press Fit from MISUMI.
- Large Head, Tapered, with configurable dimensions for each part. The tolerances on both ends and the tapered dimensions are also configurable.
- The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
- Polished, centering hole is sometimes not available for SUS304.
- SUS440C or 13Cr stainless has an identification groove at any position on D part.- Volume Discount
Days to Ship: 3 Day(s) or more -
Locating Pins - Shouldered - Tapered, Shoulder Thickness Configurable - Press Fit
MISUMI
- Locating Pins - Shouldered - Tapered, Shoulder Thickness Configurable - Press Fit from MISUMI.
- Sphere Large Head with each dimension configurable. The tolerances on both ends are also configurable.
- The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
- Hard Chrome Plating and buff finished products are not available in Precision Grade Tolerance.
- SUS440C or 13Cr stainless has an identification groove at any position on D part.
- Polishing and centering hole is sometimes not available for SUS304.
- When the P dimension is small, a centering hole will cause the sphere section to become small.Days to Ship: 3 Day(s) or more -
Small Diameter Locating Pin - Small Head / Press Fit
MISUMI
- Small Diameter Locating Pin - Small Head / Press Fit from MISUMI.
- Insertion Guide Tip Type can be selected 4 types, Tapered, Taper R, Spherical and Flat.
- Material code SG and DG are applicable to L configurable type of sphere only.
- L selectable type is applicable to spherical tip type only.
- SUS304 may not be polished.
- Chamfering of mounting portion and change of tolerance are available as alterations.
- Shaft diameter can be configured up to 3 mm.Days to Ship: 5 Day(s) or more -
![[Clean & Pack] Small Diameter Locating Pin - Straight](//content.misumi-ec.com/image/upload/t_product_view_b/v1/p/jp/product/series/110310664829/110310664829_001_20230911105917.jpg?$product_view_b$)
[Clean & Pack] Small Diameter Locating Pin - Straight
MISUMI
Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.■Part Number for Clean & Pack Products·Degreasing (Anti-rust single packing) : Part Number SL-□□ ·Precision cleaning (Degassing double packing) : Part Number SH-□□ ·Electrolytic polishing + precision cleaning (Degassing double packing) : Part Number SHD-□□ Product Part Number Cleaning Method Packaging Type Effects Compared to Uncleaned Product Environment (Standard) Process SL-□□ Degreasing Anti-rust packing Oil removal General environment Regular assembly process Post battery assembly process SH-□□ Precision cleaning Degassing double packing Oil removal
Dust removalClean environment (Class 10 to 1,000) Battery assembly process LCD-related post assembly process In-vehicle camera assembly process SHD-□□ Electrolytic polishing + precision cleaning Degassing double packing Oil removal
Dust removal
Outgas reductionVacuum environment
Clean environment (Class 10 to 1,000)Pre-semiconductor process Liquid crystal deposition process Pre-OLED process ■Notes
Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.- Volume Discount
Days to Ship: 6 Day(s) or more -
MISUMI
- Locating Pins - Press Fit from MISUMI.
- Large Flat Head with each dimension configurable. The tolerances on both ends are also configurable.
- The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
- SUS440C or 13Cr stainless has an identification groove at any position on D part.
- Polishing and centering hole sometimes not available for SUS304.
- Provided 3 options of alteration, Insertion guide (GDC), Air vent (AC), or C Chamfered Size Changes (CN).Days to Ship: 3 Day(s) or more -
![[Clean & Pack] Locating Pin - Large Head, Tapered, Taper Angle Configurable, Tolerance Selectable, Press Fit](//content.misumi-ec.com/image/upload/t_product_view_b/v1/p/jp/product/series/110310664919/110310664919_001_20230911105917.jpg?$product_view_b$)
MISUMI
Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.■Part Number for Clean & Pack Products·Degreasing (Anti-rust single packing) : Part Number SL-□□ ·Precision cleaning (Degassing double packing) : Part Number SH-□□ ·Electrolytic polishing + precision cleaning (Degassing double packing) : Part Number SHD-□□ Product Part Number Cleaning Method Packaging Type Effects Compared to Uncleaned Product Environment (Standard) Process SL-□□ Degreasing Anti-rust packing Oil removal General environment Regular assembly process Post battery assembly process SH-□□ Precision cleaning Degassing double packing Oil removal
Dust removalClean environment (Class 10 to 1,000) Battery assembly process LCD-related post assembly process In-vehicle camera assembly process SHD-□□ Electrolytic polishing + precision cleaning Degassing double packing Oil removal
Dust removal
Outgas reductionVacuum environment
Clean environment (Class 10 to 1,000)Pre-semiconductor process Liquid crystal deposition process Pre-OLED process ■Notes
Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.Days to Ship: 6 Day(s) or more -
Locating Pins - Shouldered-Taper Angle (D,P Tolerance Selectable-Threaded)
MISUMI
[Features]You can freely specify dimensions of shoulder type respective parts. It is attached with a male thread.
Days to Ship: 3 Day(s) -
Small Diameter Locating Pin - Shouldered, Threaded
MISUMI
- Small Diameter Locating Pin - Shouldered, Threaded from MISUMI.
- Insertion Guide Tip Type can be selected 4 types, Tapered, Taper R, Spherical and Flat.
- The material of pin can be selected 2 types, SK95 (SK4) Equivalent and SUS304.
- The hardness of steel pin is 50～58HRC.
- SUS304 may not be polished.
- When L=0, an undercut will be added at the neck of the thread.
- Shaft diameter can be selected up to 4 mm.Days to Ship: 6 Day(s) or more -
Locating Pins - Shouldered - Tapered, Shoulder Thickness Configurable - Threaded
MISUMI
- Locating Pins - Shouldered - Tapered, Shoulder Thickness Configurable – Threaded from MISUMI.
- Sphere Large Head with each dimension configurable. The tolerances on both ends are also configurable.
- The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
- Hard Chrome Plating and buff finished products are not available in Precision Grade Tolerance.
- SUS440C or 13Cr stainless has an identification groove at any position on D part.
- Polishing and centering hole is sometimes not available for SUS304.- Volume Discount
Days to Ship: 3 Day(s) or more -
Height Adjusting Pins - Press Fit
MISUMI
- Height Adjusting Pins - Press Fit from MISUMI.
- Small Head, Tapered, with each dimension configurable. The tolerances on both ends and the tapered dimensions are also configurable.
- The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
- Polished, centering hole is sometimes not available for SUS304.
- SUS440C or 13Cr stainless has an identification groove at any position on D part.
- Hard Chrome Plating products are not available in Precision Grade Tolerance.- Volume Discount
Days to Ship: 3 Day(s) or more -
Locating Pins - Sphere Small Head (D,P Tolerance Selectable-Press Fit)
MISUMI
Sphere Small Head with each dimension configurable. The tolerances on both ends are also configurable.
Days to Ship: 3 Day(s) or more -
Locating Pins - Small Flat Head (D,P Tolerance Selectable-Press Fit)
MISUMI
Small Flat Head with each dimension configurable. The tolerances on both ends are also configurable.
Days to Ship: 3 Day(s) -
Locating Pins - Shouldered-Taper Angle (D,P Tolerance Selectable-Press Fit)
MISUMI
- Locating Pins - Shouldered-Taper Angle (D, P Tolerance Selectable-Press Fit) from MISUMI.
- Shouldered with each dimension configurable.
- Pin’s mounting method can be selected 3 types, Thread, Tapped or Press fit.
- The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
- SUS440C or 13Cr stainless has an identification groove at any position on D part.
- SUS304 may not be polished and may have no centering hole.Days to Ship: 3 Day(s) -
Small Diameter Locating Pin - Shouldered, Press Fit
MISUMI
- Small Diameter Locating Pin - Shouldered, Press Fit from MISUMI.
- Insertion Guide Tip Type can be selected into 4 types, Tapered tip, Taper R tip, Spherical tip, and Flat tip.
- The material of locating pin can be selected 2 types, Steel SK95(SK4) Equivalent, Stainless Steel SUS304.
- SUS304 may not be polished.
- The hardness level of SK95 (SK4) Equivalent is 50～58HRC.
- The outer diameter of the locating pin can be selectable up to 4 mm.Days to Ship: 6 Day(s) or more -
Locating Pins - Small Head, Round Tapered - Threaded
MISUMI
Large Head, Tapered, with the configurable dimension for each part. The tolerances on both ends and the tapered dimensions are also configurable.
Days to Ship: 3 Day(s) -
Locating Pins - Air Vent, Threaded
MISUMI
Large Flat Head with each dimension configurable. The tolerances on both ends are also configurable.
Days to Ship: 3 Day(s)
![[Clean & Pack] Small Diameter Locating Pin - Straight](http://content.misumi-ec.com/image/upload/t_product_view_b/v1/p/jp/product/series/110310664829/110310664829_001_20230911105917.jpg?$product_view_b$)
![[Clean & Pack] Locating Pin - Large Head, Tapered, Taper Angle Configurable, Tolerance Selectable, Press Fit](http://content.misumi-ec.com/image/upload/t_product_view_b/v1/p/jp/product/series/110310664919/110310664919_001_20230911105917.jpg?$product_view_b$)
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Basic Shape |
| Environmentally friendly |
| Characteristics/Applications |
| Insertion Guide Tip Shape |
| Insertion Guide Tip Type |
| Material Details |
| Insertion Guide Specifications |
| Mounting Side Shape |
| Surface Treatment |
| Heat Treatment |
| Material |
| Insertion Guide Outer Dia. D1(mm) |
| Insertion Guide Tolerance |
| Mounting Side Outer Dia. d(mm) |
| Mounting Side Tolerance |
| Cleaning Method |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI |
| Product Series | Locating Pins - Shouldered - Tapered, Shoulder Thickness Configurable - Press Fit | Locating Pins - Shouldered-Taper Angle (D,P Tolerance Selectable-Threaded) | Locating Pins - Shouldered - Tapered, Shoulder Thickness Configurable - Threaded | Locating Pins - Sphere Small Head (D,P Tolerance Selectable-Press Fit) | Locating Pins - Small Flat Head (D,P Tolerance Selectable-Press Fit) | Locating Pins - Shouldered-Taper Angle (D,P Tolerance Selectable-Press Fit) | |||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Days to Ship | 5 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more | 5 Day(s) or more | 6 Day(s) or more | 3 Day(s) or more | 6 Day(s) or more | 3 Day(s) | 6 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more | 3 Day(s) | 3 Day(s) | 6 Day(s) or more | 3 Day(s) | 3 Day(s) |
| Basic Shape | Straight | Large Head | Large Head | Small Head | Straight | Large Head | Large Head | Shouldered | Shouldered | Large Head | Small Head | Small Head | Small Head | Shouldered | Shouldered | Large Head | Large Head |
| Environmentally friendly | RoHS Compliant (10 Substances) | RoHS Compliant (10 Substances) | - | - | RoHS Compliant (10 Substances) | - | RoHS Compliant (10 Substances) | RoHS Compliant (10 Substances) | - | - | - | - | - | - | - | - | - |
| Characteristics/Applications | Not Applicable | Not Applicable | - | - | Clean Washed | - | Clean Washed | Not Applicable | - | - | - | - | - | - | - | - | - |
| Insertion Guide Tip Shape | Round | Round / Diamond | Round / Diamond | Round | Round | Round | Round / Diamond | Round | Round | Round / Diamond | Round / Diamond | Round / Diamond | Round | Round | Round | Round / Diamond | Round |
| Insertion Guide Tip Type | Tapered / Taper R / Spherical / Flat | Tapered | Spherical | Tapered / Taper R / Spherical / Flat | Tapered / Taper R / Spherical / Flat | Flat | Tapered | Tapered | Taper R / Spherical / Flat | Spherical | Tapered | Spherical | Flat | Tapered | Tapered / Taper R / Spherical / Flat | Tapered | Flat |
| Material Details | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Insertion Guide Specifications | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided |
| Mounting Side Shape | Straight (Press-Fit) | Straight (Press-Fit) | Straight (Press-Fit) | Straight (Press-Fit) | Straight (Press-Fit) | Straight (Press-Fit) | Straight (Press-Fit) | Threaded | Threaded | Threaded | Straight (Press-Fit) | Straight (Press-Fit) | Straight (Press-Fit) | Straight (Press-Fit) | Straight (Press-Fit) | Threaded | Threaded |
| Surface Treatment | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided |
| Heat Treatment | Not Provided / Dip Quenching | Not Provided / Dip Quenching | Not Provided / Dip Quenching | Not Provided / Dip Quenching | Not Provided | Not Provided / Dip Quenching | Not Provided | Not Provided / Dip Quenching | Not Provided / Dip Quenching | Not Provided / Dip Quenching | Not Provided / Dip Quenching | Not Provided / Dip Quenching | Not Provided / Dip Quenching | Not Provided / Dip Quenching | Not Provided | Not Provided / Dip Quenching | Not Provided / Dip Quenching |
| Material | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Stainless Steel | Steel / Stainless Steel | Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel |
| Insertion Guide Outer Dia. D1(mm) | - | - | - | 0.5 ～ 2.99 | - | - | 1 ～ 30 | 2 ～ 20 | 1 ～ 7 | - | 1 ～ 20 | 1 ～ 20 | 1.5 ～ 20 | 1 ～ 20 | 1 ～ 7 | - | - |
| Insertion Guide Tolerance | 0.005/0 | 0/-0.01 ～ h7 | 0/-0.01 ～ h7 | 0/-0.01 ～ 0.005/0 | 0.005/0 | 0/-0.01 ～ h7 | 0/-0.01 ～ h7 | 0/-0.01 ～ h7 | 0/-0.005 ～ 0.005/0 | 0/-0.01 ～ h7 | 0/-0.01 ～ h7 | 0/-0.01 ～ h7 | 0/-0.01 ～ h7 | 0/-0.01 ～ h7 | 0/-0.005 ～ 0.005/0 | 0/-0.01 ～ h7 | 0/-0.01 ～ h7 |
| Mounting Side Outer Dia. d(mm) | 0.5 ～ 3 | 1 ～ 20 | 1 ～ 20 | 0.51 ～ 3 | 0.5 ～ 3 | 1 ～ 20 | 1 ～ 20 | 3 ～ 20 | 2 ～ 4 | 3 ～ 20 | 2 ～ 20 | 2 ～ 20 | 2 ～ 20 | 2 ～ 20 | 1 ～ 4 | 3 ～ 20 | 3 ～ 20 |
| Mounting Side Tolerance | 0.005/0 | 0.005/0 | 0.005/0 | 0.005/0 | 0.005/0 | 0.005/0 | 0.005/0 | 0.005/0 | 0.005/0 | 0.005/0 | 0.005/0 | 0.005/0 | 0.005/0 | 0.005/0 | 0.005/0 | 0.005/0 | 0.005/0 |
| Cleaning Method | - | - | - | - | Degreasing / Precision Cleaning / Electrolytic Polishing + Precision Cleaning | - | Degreasing / Precision Cleaning / Electrolytic Polishing + Precision Cleaning | - | - | - | - | - | - | - | - | - | - |
![[Clean & Pack] Small Diameter Locating Pin - Straight](http://content.misumi-ec.com/image/upload/t_product_view_c/v1/p/jp/product/series/110310664829/110310664829_001_20230911105917.jpg?$product_view_c$)
![[Clean & Pack] Locating Pin - Large Head, Tapered, Taper Angle Configurable, Tolerance Selectable, Press Fit](http://content.misumi-ec.com/image/upload/t_product_view_c/v1/p/jp/product/series/110310664919/110310664919_001_20230911105917.jpg?$product_view_c$)
Loading...
Configure
Specification/Dimensions
-
Environmentally friendly
-
Characteristics/Applications
-
Insertion Guide Tip Shape
-
Round -
Diamond -
Triangle
-
-
Insertion Guide Tip Type
-
Tapered -
Round Tapered -
Taper R -
R -
Spherical -
Flat -
Ball End -
Bullet Nose
-
-
Material Details
- High Strength Stainless Steel (35 HRC or more)
- SUS304
- SUS304 Equiv.
- SUS440C or 13Cr Stainless Steel
- SKS3 (Including equivalent materials)
- S45C (Including equivalent materials)
- SUS316
-
Insertion Guide Specifications
-
Not Provided -
With Screw Mount Hole -
With Hex Socket -
With Flathead Slot -
Tapped
-
-
Mounting Side Shape
-
Straight (Press-Fit) -
Tapped -
Threaded -
Circumference Groove -
Notch -
Set Screw Flat
-
-
Surface Treatment
- Not Provided
- Black Oxide
- Electroless Nickel Plating
- Hard Chrome Plating
- Buffed
- Hard Chrome Plating + Buffed
- Anodize
- Polishing
- Isonite Treatment
-
Heat Treatment
- Not Provided
- Carburized
- Dip Quenching
-
Material
- Steel
- Stainless Steel
- Resin
- Aluminum
-
Insertion Guide Outer Dia. D1(mm)
-
Insertion Guide Tolerance
-
Mounting Side Outer Dia. d(mm)
-
Mounting Side Tolerance
-
Cleaning Method
- Degreasing
- Precision Cleaning
- Electrolytic Polishing + Precision Cleaning
- No Cleaning
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
Days to Ship
-
- All
- 1 Day(s) or Less
- 2 Day(s) or Less
- 3 Day(s) or Less
- 4 Day(s) or Less
- 5 Day(s) or Less
- 6 Day(s) or Less
- 7 Day(s) or Less
- 8 Day(s) or Less
- 9 Day(s) or Less
- 11 Day(s) or Less
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy