(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Locating Pins（Insertion Guide Tolerance：0/-0.01）
Basic Shape
-
Large Head -
Small Head -
Straight / Air Vent -
Shouldered -
Screw Mounted -
Flanged -
Double-Stepped -
Straight
-
Locating Pins - Large Head, Tapered (Press Fit)
MISUMI
- Locating Pins - Large Head, Tapered (Press Fit) from MISUMI.
- Tapered Head Standard Type. Press Fit. Economical and there is a variety of selections to choose from. Same day shipping available.
- The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
- Polished, centering hole is sometimes not available for SUS304.
- SUS440C or 13Cr stainless has an identification groove at any position on D part.
- The insertion guide is applicable to tolerance p6 only.- Volume Discount
Days to Ship: 1 Day(s) or more -
Small Diameter Locating Pin - Straight / Small Head
MISUMI
- Small Diameter Locating Pin - Straight / Small Head from MISUMI.
- Insertion Guide Tip Type can be selected into 4 types, Tapered tip, Taper R tip, Spherical tip, and Flat tip.
- The material of locating pin can be selected 5 types, Steel SKD61, Steel SK95(SK4), Stainless Steel SUS304, Stainless Steel SUS304 Equivalent, Stainless Steel SUS440C or 13Cr.
- The outer diameter of the locating pin can be configurable up to 3 mm.
- SUS304 may not be polished.- Volume Discount
Days to Ship: 5 Day(s) or more -
Locating Pins - Sphere Small Head (Press Fit)
MISUMI
- Locating Pins - Sphere Small Head (Press Fit) from MISUMI.
- The Sphere Head can prevent the mating material from being scratched even when you insert by sliding horizontally against the pin end.
- The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
- Polished, centering hole is sometimes not available for SUS304.
- SUS440C or 13Cr stainless has an identification groove at any position on D part.
- Insertion guide tip shape can be selected 2 types, round, and diamond.- Volume Discount
Days to Ship: 2 Day(s) or more -
Locating Pins - Large Head, Tapered (Threaded)
MISUMI
- Locating Pins - Large Head, Tapered (Threaded) from MISUMI.
- Large Head, Tapered, Press Fit + Lock Nut Shape. Improved maintainability compared to Press Fit Type.
- The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
- SUS440C or 13Cr stainless has an identification groove at any position on D part.
- Polishing and centering hole sometimes not available for SUS304.
- Provided 2 options of alteration, Wrench Hole Machining (LAC), or Wrench Flats (SC).- Volume Discount
Days to Ship: 3 Day(s) or more -
Locating Pins - Tip Shape Selectable (Straight Tapped)
MISUMI
- Locating Pins - Tip Shape Selectable (Straight Tapped) from MISUMI.
- The tip shape is selectable from three types. To be mounted from back using bolts. Improved maintainability compared to the press fit type.
- The material of locating pin can be selected 4 types, S45C Equivalent, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
- SUS440C or 13Cr stainless of round type and diamond type has an identification groove at any position on D part.
- The tightening torque (ref. value) for hardened products is strength class 8.8. Not applicable when using locking materials or lock washers.- Volume Discount
Days to Ship: 3 Day(s) or more -
Locating Pins - Small Head, Tapered (Press Fit)
MISUMI
- Locating Pins - Small Head, Tapered (Press Fit) from MISUMI.
- Tapered Head Standard Type. Press Fit. Economical and there is a variety of selections to choose from. Same day shipping available.
- The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
- Polished, centering hole is sometimes not available for SUS304.
- SUS440C or 13Cr stainless has an identification groove at any position on D part.
- The insertion guide is applicable to both the tolerance m6 and p6.- Volume Discount
Days to Ship: 1 Day(s) or more -
Locating Pins - Tip Shape Selectable (Threaded)
MISUMI
- Locating Pins - tip shape selectable (Threaded) from MISUMI.
- Insertion guide tip type can be selected 3 types, Tapered, Taper R, and Spherical.
- Insertion guide tip shape can be selected 2 types, round, and diamond.
- The material of locating pin can be selected 4 types, SKS3 Equivalent, S45C Equivalent, SUS304, SUS440C or 13Cr stainless.
- A fully threaded type of L=0 without pivot is also available.
- Polished, centering hole is may not available for SUS304.- Volume Discount
Days to Ship: 3 Day(s) or more -
Locating Pins - Large Head, Tapered (Tapped)
MISUMI
- Locating Pins - Large Head, Tapered (Tapped) from MISUMI.
- Large Head, Tapered with the shape designed to be mounted from back using bolts. Improved maintainability compared to Press Fit Type.
- The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
- Polished, centering hole is sometimes not available for SUS304.
- SUS440C or 13Cr stainless has an identification groove at any position on D part.
- Insertion guide tip shape can be selected 2 types, round, and diamond.- Volume Discount
Days to Ship: 1 Day(s) or more -
Locating Pins - Sphere Large Head (Press Fit)
MISUMI
- Locating Pins - Sphere Large Head (Press Fit) from MISUMI.
- The Sphere Head can prevent the mating material from being scratched even when you insert by sliding horizontally against the pin end.
- The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
- Polished, centering hole is sometimes not available for SUS304.
- SUS440C or 13Cr stainless has an identification groove at any position on D part.
- Insertion guide tip shape can be selected 2 types, round, and diamond.- Volume Discount
Days to Ship: 2 Day(s) or more -
Small Diameter Locating Pin - with Shoulder Seat
MISUMI
- Small Diameter Locating Pin - with Shoulder Seat from MISUMI.
- Insertion Guide Tip Type can be selected into 4 types, Tapered tip, Spherical tip, and Flat tip.
- The outer diameter of the locating pin can be configurable from 1.0 to 3.5 mm.
- The shoulder part is provided to prevent pin extraction.
- The overall length of the product can be configurable from 13.0 mm to 30.0 mm.
- The material of locating pin is made of Stainless Steel SUS304.Days to Ship: 5 Day(s) or more -
Locating Pins - Sphere Large Head (Tapped)
MISUMI
- Locating Pins - Sphere Large Head (Tapped) from MISUMI.
- Sphere Large Head with the shape designed to be mounted from back using bolts. Improved maintainability compared to Press Fit Type.
- The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
- Polished, centering hole is sometimes not available for SUS304.
- SUS440C or 13Cr stainless has an identification groove at any position on D part.
- The spherical head may be polished.- Volume Discount
Days to Ship: 3 Day(s) or more -
Locating Pins - Small Head, Round Tapered - Press Fit
MISUMI
- Locating Pins - Small Head, Round Tapered - Press Fit from MISUMI.
- Large Head, Tapered, with configurable dimensions for each part. The tolerances on both ends and the tapered dimensions are also configurable.
- The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
- Polished, centering hole is sometimes not available for SUS304.
- SUS440C or 13Cr stainless has an identification groove at any position on D part.- Volume Discount
Days to Ship: 3 Day(s) or more -
Locating Pins - Tip Shape Selectable (Press Fit)
MISUMI
- Locating Pins - Tip Shape Selectable (Press Fit) from MISUMI.
- The tip shape is selectable from three types, Tapered (A), Taper R (B), Spherical (C). Highly customizable with each dimension configurable. Press Fit.
- The material of pin can be selected 4 types, steel SKS3 Equivalent, S45C, stainless steel SUS304, SUS440C or 13Cr stainless.
- SUS440C or 13Cr stainless has an identification groove at any position on D part.
- Polishing and centering hole is sometimes not available for SUS304.- Volume Discount
Days to Ship: 3 Day(s) or more -
Locating Pins - Shouldered - Tapered, Shoulder Thickness Configurable - Press Fit
MISUMI
- Locating Pins - Shouldered - Tapered, Shoulder Thickness Configurable - Press Fit from MISUMI.
- Sphere Large Head with each dimension configurable. The tolerances on both ends are also configurable.
- The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
- Hard Chrome Plating and buff finished products are not available in Precision Grade Tolerance.
- SUS440C or 13Cr stainless has an identification groove at any position on D part.
- Polishing and centering hole is sometimes not available for SUS304.
- When the P dimension is small, a centering hole will cause the sphere section to become small.Days to Ship: 3 Day(s) or more -
Locating Pins - Sphere Large Head (Threaded)
MISUMI
- Locating Pins - Sphere Large Head (Threaded) from MISUMI.
- Sphere Large Head, Threaded + Lock Nut Type. Improved maintainability compared to Press Fit Type.
- Polished, Centering hole is sometimes not available for SUS304.
- SUS440C or 13Cr stainless has an identification groove at any position on D part.
- The tightening torque (ref. value) for hardened products is strength class 8.8. Not applicable when using locking materials or lock washers.
- Provided 3 options of alteration, Sphere tip (RC), Wrench Hole Machining (LAC), or Wrench Flats (SC).- Volume Discount
Days to Ship: 3 Day(s) or more -
Small Diameter Locating Pins - High Hardness Stainless Steel - Small Head
MISUMI
"High accuracy positioning is available, because the O.D. can be configured in 0.01mm increment on either of the mounting side or the locating side."
Days to Ship: 6 Day(s) or more -
Small Diameter Locating Pin - Small Head / Press Fit
MISUMI
- Small Diameter Locating Pin - Small Head / Press Fit from MISUMI.
- Insertion Guide Tip Type can be selected 4 types, Tapered, Taper R, Spherical and Flat.
- Material code SG and DG are applicable to L configurable type of sphere only.
- L selectable type is applicable to spherical tip type only.
- SUS304 may not be polished.
- Chamfering of mounting portion and change of tolerance are available as alterations.
- Shaft diameter can be configured up to 3 mm.Days to Ship: 5 Day(s) or more -
Locating Pins - Large Head, Bullet Nose, Compact - Press Fit
MISUMI
R shape at insertion guide enables smooth insertion of workpiece. Compact Type with specifiable shorter L dimension.
Days to Ship: 6 Day(s) or more -
Locating Pins - Large Head, Bullet Nose, Compact - Threaded
MISUMI
- Locating Pins - Large Head, Bullet Nose, Compact – Threaded from MISUMI.
- R shape at insertion guide enables smooth insertion of workpiece. Compact Type with specifiable shorter L dimension.
- Polished, centering hole is may not be on all SUS304 Pins.
- The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
- The tightening torque (ref. value) for hardened products is strength class 8.8. Not applicable when using locking materials or lock washers.Days to Ship: 6 Day(s) or more -
Locating Pins - Large Head, Tapered - Tapped
MISUMI
Nonmagnetic (Aluminum) Locating Pins. Does not magnetically affect the surroundings.
Days to Ship: 6 Day(s) or more -
![[Clean & Pack] Small Diameter Locating Pin - Straight](//content.misumi-ec.com/image/upload/t_product_view_b/v1/p/jp/product/series/110310664829/110310664829_001_20230911105917.jpg?$product_view_b$)
[Clean & Pack] Small Diameter Locating Pin - Straight
MISUMI
Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.■Part Number for Clean & Pack Products·Degreasing (Anti-rust single packing) : Part Number SL-□□ ·Precision cleaning (Degassing double packing) : Part Number SH-□□ ·Electrolytic polishing + precision cleaning (Degassing double packing) : Part Number SHD-□□ Product Part Number Cleaning Method Packaging Type Effects Compared to Uncleaned Product Environment (Standard) Process SL-□□ Degreasing Anti-rust packing Oil removal General environment Regular assembly process Post battery assembly process SH-□□ Precision cleaning Degassing double packing Oil removal
Dust removalClean environment (Class 10 to 1,000) Battery assembly process LCD-related post assembly process In-vehicle camera assembly process SHD-□□ Electrolytic polishing + precision cleaning Degassing double packing Oil removal
Dust removal
Outgas reductionVacuum environment
Clean environment (Class 10 to 1,000)Pre-semiconductor process Liquid crystal deposition process Pre-OLED process ■Notes
Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.- Volume Discount
Days to Ship: 6 Day(s) or more -
Locating Pins - Plastic, Small Diameter
MISUMI
- Locating Pins - Plastic, Small Diameter from MISUMI.
- Having a metal core, it is less prone to be broken when used for side locating.
- The outer diameter tolerance is the result of measurement at room temperature.
- Core Rod material of locating pin is made of SUS304.
- There is a flat part of Ø0.2 or below at the tip of Straight Type, Spherical Type and Small Head Type.
- MC nylon of flat tip type is not available.Days to Ship: 6 Day(s) or more -
Locating Pins - High Hardness Stainless Steel, Large Flat Head (Press Fit)
MISUMI
- Locating Pins - High Hardness Stainless Steel, Large Flat Head (Press Fit)
- Large Flat Head with each dimension configurable. We reduced the price drastically compared to the conventional products.
- If the diameter of locating pin exceeds Ø10, core hardness may be 30HRC~.
- The tightening torque (ref. value) for hardened products is strength class 10.9. Not applicable when using locking materials or lock washers.
- The material of this locating pin is made of High hardness stainless steel.Days to Ship: 6 Day(s) or more -
Locating Pins - High Hardness Stainless Steel Sphere Large Head (Threaded)
MISUMI
- Locating Pins - High Hardness Stainless Steel Sphere Large Head (Threaded) from MISUMI.
- Sphere Large Head with each dimension configurable. We reduced the price drastically compared to the conventional products.
- If the diameter exceeds Ø10, core hardness may be 30HRC~.
- For Tightening Torque (Reference Value), Tightening Torque Strength Class (10.9). Not applicable when using Locking Agents or Spring Washers.
- The material of this locating pin is made of High hardness stainless steel with a hardness level at 35HRC~.Days to Ship: 6 Day(s) or more -
Locating Pins - Shouldered (Tapered - Shoulder Thickness Configurable-Tapped)
MISUMI
- Locating Pins - Shouldered (Tapered - Shoulder Thickness Configurable-Tapped) from MISUMI.
- Insertion guide tip shape can be selected 2 types, round, and diamond.
- SUS440C or 13Cr stainless has an identification groove on D part.
- A machining step remains on the shoulder top for Diamond Shape.
- SUS304 may not be polished and may have no centering hole.
- The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.- Volume Discount
Days to Ship: 3 Day(s) or more -
MISUMI
- Locating pins - flanged flat from MISUMI.
- Insertion guide tip shape can be selected 2 types, round, and diamond.
- Insertion guide tip type can be selected 2 types, Tapered (A shape), and Taper R (B Shape).
- The flange of pin has 2 shapes available, round flange and compact flange.
- It can be used by fixing the flange with bolts. 2 types of tip shapes are available.
- The material of pin can be selected 2 types, SKS3 Equivalent or SUS304 Equivalent.Days to Ship: 7 Day(s) -
Locating Pins - Small Head, Round Tapered - Tapped
MISUMI
- Locating Pins - Small Head, Round Tapered – Tapped from MISUMI.
- Large Head, Tapered, with configurable dimensions for each part. The tolerances on both ends and the tapered dimensions are also configurable.
- The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
- Polished and centering hole is sometimes not available for SUS304.
- SUS440C or 13Cr stainless has an identification groove at any position on D part.- Volume Discount
Days to Ship: 3 Day(s) or more -
MISUMI
- Locating Pins - Press Fit from MISUMI.
- Large Flat Head with each dimension configurable. The tolerances on both ends are also configurable.
- The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
- SUS440C or 13Cr stainless has an identification groove at any position on D part.
- Polishing and centering hole sometimes not available for SUS304.
- Provided 3 options of alteration, Insertion guide (GDC), Air vent (AC), or C Chamfered Size Changes (CN).Days to Ship: 3 Day(s) or more -
Locating Pin High Hardness Stainless Steel Taper with Flange - Female Thread -
MISUMI
Shouldered and Tapered Type has been newly added to the High Hardness Stainless Steel Locating Pin product line-up. For orders of up to 500 pcs., 5th day shipping is available.
Days to Ship: 6 Day(s) or more -
Locating Pins - Shouldered - Tapered, Shoulder Thickness Configurable - Tapped
MISUMI
- Locating Pins - Shouldered - Tapered, Shoulder Thickness Configurable – Tapped from MISUMI.
- Sphere Large Head with each dimension configurable. The tolerances on both ends are also configurable.
- The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
- Hard Chrome Plating and buff finished products are not available in Precision Grade Tolerance.
- SUS440C or 13Cr stainless has an identification groove at any position on D part.
- Polishing and centering hole is sometimes not available for SUS304.- Volume Discount
Days to Ship: 3 Day(s) or more -
Locating Pins - Large Head Tapered (Plastic Tip - Threaded)
MISUMI
Plastic material bonded to the tip of insertion guide prevents workpiece from being scratched.
Days to Ship: 8 Day(s) or more -
Locating Pins for Height Adjusting - Small Head Tapped
MISUMI
Locating pins for printed circuit boards. B dimension is fixed short for thin boards. Reasonably priced.
Days to Ship: 3 Day(s) -
![[Clean & Pack] Locating Pin - Large Head, Tapered, Taper Angle Configurable, Tolerance Selectable, Press Fit](//content.misumi-ec.com/image/upload/t_product_view_b/v1/p/jp/product/series/110310664919/110310664919_001_20230911105917.jpg?$product_view_b$)
MISUMI
Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.■Part Number for Clean & Pack Products·Degreasing (Anti-rust single packing) : Part Number SL-□□ ·Precision cleaning (Degassing double packing) : Part Number SH-□□ ·Electrolytic polishing + precision cleaning (Degassing double packing) : Part Number SHD-□□ Product Part Number Cleaning Method Packaging Type Effects Compared to Uncleaned Product Environment (Standard) Process SL-□□ Degreasing Anti-rust packing Oil removal General environment Regular assembly process Post battery assembly process SH-□□ Precision cleaning Degassing double packing Oil removal
Dust removalClean environment (Class 10 to 1,000) Battery assembly process LCD-related post assembly process In-vehicle camera assembly process SHD-□□ Electrolytic polishing + precision cleaning Degassing double packing Oil removal
Dust removal
Outgas reductionVacuum environment
Clean environment (Class 10 to 1,000)Pre-semiconductor process Liquid crystal deposition process Pre-OLED process ■Notes
Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.Days to Ship: 6 Day(s) or more -
Locating Pins - Large Head, Tapered - Threaded, Hex Socket
MISUMI
- Locating Pins - Large Head, Tapered - Threaded, Hex Socket from MISUMI.
- Hex Socket is attached to the tip of Large Head, Tapered, Threaded. It is easy to mount as you can stop the head rotation.
- The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
- SUS440C or 13Cr stainless has an identification groove at any position on D part.
- The tightening torque (ref. value) for hardened products is strength class 8.8. Not applicable when using locking materials or lock washers.Days to Ship: 3 Day(s) or more -
Locating Pins - Shouldered (Tapered, Tapped)
MISUMI
- Locating Pins - Shouldered (Tapered, Tapped) from MISUMI.
- Shouldered with the shape designed to be mounted from back using bolts. Improved maintainability compared to Press Fit Type.
- The material of locating pin can be selected 2 types, steel SKS3 Equivalent, stainless steel SUS304.
- A machining step remains on the shoulder top for Diamond shape.
- SUS304 may not be polished and may have no centering hole.
- The tightening torque (ref. value) for hardened products is strength class 8.8. Not applicable when using locking materials or lock washers.- Volume Discount
Days to Ship: 3 Day(s) or more -
MISUMI
"The pin body is secured by the bolts. Can be used even on portions where the tapped screws cannot be used, because the bolt can be tightened from the top of the insertion guide."
Days to Ship: 3 Day(s) or more -
Locating Pins - High Hardness Stainless Steel Large Head, Tapered (Press Fit)
MISUMI
- Locating Pins - High Hardness Stainless Steel Large Head, Tapered (Press Fit) from MISUMI.
- Large Head Tapered with each dimension configurable. We reduced the price drastically compared to the conventional products.
- The material of this locating pin is made of High hardness stainless steel with a hardness level at 35HRC~.
- If the diameter exceeds Ø10, core hardness may be 30HRC~.
- For high hardness stainless steel large head tapered type, the configurable range of dimensions has been further widened and the number of available alterations has been increased.Days to Ship: 6 Day(s) or more -
Locating Pins - High Hardness Stainless Steel, Large Flat Head (Tapped)
MISUMI
Large Flat Head with each dimension configurable. We reduced the price drastically compared to the conventional products.
Days to Ship: 6 Day(s) or more -
Height Adjusting Pins - Counterbored
MISUMI
- Height Adjusting Pins – Counterbored from MISUMI.
- Small Head, Tapered, with each dimension configurable. The tolerances on both ends and the tapered dimensions are also configurable.
- The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
- Polished, centering hole is sometimes not available for SUS304.
- SUS440C or 13Cr stainless has an identification groove at any position on D part.
- Hard Chrome Plating products are not available in Precision Grade Tolerance.- Volume Discount
Days to Ship: 3 Day(s) or more -
Locating Pins - Shouldered-Taper Angle (D,P Tolerance Selectable-Threaded)
MISUMI
[Features]You can freely specify dimensions of shoulder type respective parts. It is attached with a male thread.
Days to Ship: 3 Day(s) or more -
Locating Pins - Shouldered (Tapered - Shoulder Thickness Configurable-Threaded)
MISUMI
- Locating Pins - Shouldered (Tapered - Shoulder Thickness Configurable-Threaded) from MISUMI.
- SUS440C or 13Cr stainless has an identification groove on D part.
- A machining step remains on the shoulder top for Diamond Shape.
- SUS304 may not be polished and may have no centering hole.
- You can specify shoulder type flange thickness and flange diameter. It is attached with a male thread.
- The tightening torque (ref. value) for hardened products is strength class 8.8. Not applicable when using locking materials or lock washers.Days to Ship: 3 Day(s) or more -
Locating Pins Large Head, Spherical, Threaded
MISUMI
This is an economy item, The price is cheaper than the MISUMI standard product.
- RoHS
Days to Ship: 4 Day(s) -
Locating Pins - Tip Shape Selectable (Tip Length Configurable-Threaded)
MISUMI
While it has the same shape as conventional Tip Shape Selectable Type (Shapes A and C only), its configurable range is different therefrom. Overall length of insertion guide, R length and tapered section length are configurable.
- Volume Discount
Days to Ship: 3 Day(s) or more -
Locating Pins - Tip Shape Selectable (Configurable Shoulder Thickness-Threaded)
MISUMI
- Locating Pins - Tip Shape Selectable (Configurable Shoulder Thickness-Threaded) from MISUMI.
- The tip shape and the fixed shape of the Shouldered type are selectable from three types respectively.
- The material of pin can be selected 4 types, steel SKS3 Equivalent, S45C, stainless steel SUS304, SUS440C or 13Cr stainless.
- SUS304 may not be polished and may have no centering hole.
- SUS440C or 13Cr stainless has an identification groove at any position on D part.
- A machining step remains on the shoulder top for Diamond shape.- Volume Discount
Days to Ship: 4 Day(s) or more -
Feed Pins - Shouldered - Threaded
MISUMI
Locating Pins with the tapered part configurable to be longer. The Shoulder supports the workpiece so that it will not damage the base.
Days to Ship: 7 Day(s)
![[Clean & Pack] Small Diameter Locating Pin - Straight](http://content.misumi-ec.com/image/upload/t_product_view_b/v1/p/jp/product/series/110310664829/110310664829_001_20230911105917.jpg?$product_view_b$)
![[Clean & Pack] Locating Pin - Large Head, Tapered, Taper Angle Configurable, Tolerance Selectable, Press Fit](http://content.misumi-ec.com/image/upload/t_product_view_b/v1/p/jp/product/series/110310664919/110310664919_001_20230911105917.jpg?$product_view_b$)
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Specifications |
| Basic Shape |
| Environmentally friendly |
| Characteristics/Applications |
| Insertion Guide Tip Shape |
| Insertion Guide Tip Type |
| Material Details |
| Insertion Guide Specifications |
| Mounting Side Shape |
| Surface Treatment |
| Heat Treatment |
| Material |
| Insertion Guide Outer Dia. D1(mm) |
| Insertion Guide Tolerance |
| Mounting Side Outer Dia. d(mm) |
| Mounting Side Tolerance |
| Cleaning Method |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI |
| Product Series | Locating Pins - Shouldered - Tapered, Shoulder Thickness Configurable - Press Fit | Small Diameter Locating Pins - High Hardness Stainless Steel - Small Head | Locating Pins - Large Head, Bullet Nose, Compact - Press Fit | Locating Pins - High Hardness Stainless Steel, Large Flat Head (Press Fit) | Locating Pins - High Hardness Stainless Steel Sphere Large Head (Threaded) | Locating Pins - Shouldered (Tapered - Shoulder Thickness Configurable-Tapped) | Locating Pin High Hardness Stainless Steel Taper with Flange - Female Thread - | Locating Pins - Shouldered - Tapered, Shoulder Thickness Configurable - Tapped | Locating Pins - High Hardness Stainless Steel Large Head, Tapered (Press Fit) | Locating Pins - High Hardness Stainless Steel, Large Flat Head (Tapped) | Locating Pins - Shouldered-Taper Angle (D,P Tolerance Selectable-Threaded) | Locating Pins - Shouldered (Tapered - Shoulder Thickness Configurable-Threaded) | Locating Pins - Tip Shape Selectable (Tip Length Configurable-Threaded) | Locating Pins - Tip Shape Selectable (Configurable Shoulder Thickness-Threaded) | |||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Days to Ship | 1 Day(s) or more | 5 Day(s) or more | 2 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more | 1 Day(s) or more | 3 Day(s) or more | 1 Day(s) or more | 2 Day(s) or more | 5 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more | 6 Day(s) or more | 5 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 3 Day(s) or more | 7 Day(s) | 3 Day(s) or more | 3 Day(s) or more | 6 Day(s) or more | 3 Day(s) or more | 8 Day(s) or more | 3 Day(s) | 6 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more | 4 Day(s) | 3 Day(s) or more | 4 Day(s) or more | 7 Day(s) |
| Specifications |
| ||||||||||||||||||||||||||||||||||||||||||||
| Basic Shape | Large Head | Straight | Small Head | Large Head | Large Head / Straight | Small Head | Large Head | Large Head | Large Head | Small Head | Large Head | Large Head | Large Head | Large Head | Large Head | Small Head | Small Head | Large Head | Large Head | Large Head | Straight | Small Head / Straight | Large Head | Large Head | Shouldered | Flanged | Large Head | Large Head | Shouldered | Large Head | Large Head | Small Head | Large Head | Large Head | Shouldered | Screw Mounted | Large Head | Large Head | Small Head | Shouldered | Shouldered | Large Head | Large Head | Shouldered | Shouldered |
| Environmentally friendly | - | RoHS Compliant (10 Substances) | - | RoHS Compliant (10 Substances) | RoHS Compliant (10 Substances) | - | - | - | RoHS Compliant (10 Substances) | - | RoHS Compliant (10 Substances) | RoHS Compliant (10 Substances) | RoHS Compliant (10 Substances) | - | - | - | - | - | RoHS Compliant (10 Substances) | - | RoHS Compliant (10 Substances) | RoHS Compliant (10 Substances) | - | - | - | RoHS Compliant (10 Substances) | RoHS Compliant (10 Substances) | - | RoHS Compliant (10 Substances) | - | - | - | RoHS Compliant (10 Substances) | - | RoHS Compliant (10 Substances) | RoHS Compliant (10 Substances) | RoHS Compliant (10 Substances) | - | RoHS Compliant (10 Substances) | RoHS Compliant (10 Substances) | - | - | - | RoHS Compliant (10 Substances) | - |
| Characteristics/Applications | - | Not Applicable | - | Not Applicable | Not Applicable | - | - | - | Not Applicable | - | Not Applicable | Not Applicable | Not Applicable | - | - | - | - | - | Not Applicable | - | Clean Washed | Not Applicable | - | - | - | Not Applicable | Not Applicable | - | Not Applicable | - | - | - | Clean Washed | - | Not Applicable | Not Applicable | Not Applicable | - | Not Applicable | Not Applicable | - | - | - | Not Applicable | - |
| Insertion Guide Tip Shape | Round / Diamond | Round | Round / Diamond | Round / Diamond | Round / Diamond | Round / Diamond | Round / Diamond | Round / Diamond | Round / Diamond | Round | Round / Diamond | Round / Diamond | Round / Diamond | Round / Diamond | Round / Diamond | Round | Round | Round | Round | Round / Diamond | Round | Round | Round | Round / Diamond | Round / Diamond | Round / Diamond | Round / Diamond | Round | Round / Diamond | Round / Diamond | Round | Round | Round / Diamond | Round / Diamond | Round / Diamond | Round | Round / Diamond | Round | Round / Diamond | Round | Round / Diamond | Diamond | Round | Round / Diamond | Round |
| Insertion Guide Tip Type | Tapered | Tapered / Taper R / Spherical / Flat | Spherical | Tapered | Tapered / Taper R / R | Tapered | Tapered / Taper R / R | Tapered | Spherical | Tapered / Spherical / Flat | Spherical | Tapered | Tapered / Taper R / R | Spherical | Spherical | Tapered / Taper R / Spherical / Flat | Tapered / Taper R / Spherical / Flat | Bullet Nose | Bullet Nose | Tapered | Tapered / Taper R / Spherical / Flat | Spherical | Flat | Spherical | Tapered | Tapered / Taper R | Tapered | Flat | Tapered | Spherical | Tapered | Spherical | Tapered | Tapered | Tapered | Tapered | Tapered | Flat | Tapered | Tapered | Tapered | Spherical | Taper R / R | Tapered / Taper R / R | Tapered |
| Material Details | SUS304 / SUS304 Equiv. / SUS440C or 13Cr Stainless Steel / SKS3 (Including equivalent materials) | - | - | - | - | SUS304 / SUS304 Equiv. / SUS440C or 13Cr Stainless Steel / SKS3 (Including equivalent materials) | SUS304 / SUS440C or 13Cr Stainless Steel / SKS3 (Including equivalent materials) / S45C (Including equivalent materials) | SUS304 / SUS304 Equiv. / SUS440C or 13Cr Stainless Steel / SKS3 (Including equivalent materials) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | SUS304 / SUS440C or 13Cr Stainless Steel / SKS3 (Including equivalent materials) / SUS316 | - | - | - | - | - | - | - | - | SUS304 / SUS440C or 13Cr Stainless Steel / SKS3 (Including equivalent materials) / S45C (Including equivalent materials) | - | - |
| Insertion Guide Specifications | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | With Hex Socket | Not Provided | With Screw Mount Hole | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided |
| Mounting Side Shape | Straight (Press-Fit) | Straight (Press-Fit) | Straight (Press-Fit) | Threaded | Tapped | Straight (Press-Fit) | Threaded | Tapped | Straight (Press-Fit) | Straight (Press-Fit) | Tapped | Straight (Press-Fit) | Straight (Press-Fit) | Straight (Press-Fit) | Threaded | Straight (Press-Fit) | Straight (Press-Fit) | Straight (Press-Fit) | Threaded | Tapped | Straight (Press-Fit) | Straight (Press-Fit) | Straight (Press-Fit) | Threaded | Tapped | Straight (Press-Fit) | Tapped | Straight (Press-Fit) | Tapped | Tapped | Threaded | Tapped | Straight (Press-Fit) | Threaded | Tapped | Straight (Press-Fit) | Straight (Press-Fit) | Tapped | Tapped | Threaded | Threaded | Threaded | Threaded | Straight (Press-Fit) / Tapped / Threaded | Threaded |
| Surface Treatment | Not Provided / Hard Chrome Plating | Not Provided | Not Provided / Hard Chrome Plating / Buffed / Hard Chrome Plating + Buffed | Not Provided / Hard Chrome Plating | Not Provided / Black Oxide / Hard Chrome Plating | Not Provided / Hard Chrome Plating | Not Provided / Black Oxide / Hard Chrome Plating | Not Provided / Hard Chrome Plating | Not Provided / Hard Chrome Plating / Buffed / Hard Chrome Plating + Buffed | Not Provided | Not Provided / Hard Chrome Plating / Buffed / Hard Chrome Plating + Buffed | Not Provided / Hard Chrome Plating | Not Provided / Black Oxide / Hard Chrome Plating | Not Provided / Hard Chrome Plating / Buffed / Hard Chrome Plating + Buffed | Not Provided / Hard Chrome Plating / Buffed / Hard Chrome Plating + Buffed | Not Provided | Not Provided | Not Provided / Hard Chrome Plating | Not Provided / Hard Chrome Plating | Anodize | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided / Hard Chrome Plating | Not Provided / Hard Chrome Plating | Not Provided / Hard Chrome Plating | Not Provided / Hard Chrome Plating | Not Provided | Not Provided / Hard Chrome Plating / Buffed / Hard Chrome Plating + Buffed | Not Provided | Not Provided | Not Provided / Hard Chrome Plating | Not Provided / Hard Chrome Plating | Not Provided / Hard Chrome Plating | Not Provided / Black Oxide / Hard Chrome Plating | Not Provided | Not Provided | Not Provided / Hard Chrome Plating | Not Provided / Hard Chrome Plating | Not Provided / Hard Chrome Plating | Not Provided | Not Provided / Black Oxide / Hard Chrome Plating | Not Provided / Black Oxide / Hard Chrome Plating | Not Provided / Hard Chrome Plating |
| Heat Treatment | Not Provided / Dip Quenching | Not Provided / Dip Quenching | Not Provided / Dip Quenching | Not Provided / Dip Quenching | Not Provided / Dip Quenching | Not Provided / Dip Quenching | Not Provided / Dip Quenching | Not Provided / Dip Quenching | Not Provided / Dip Quenching | Not Provided | Not Provided / Dip Quenching | Not Provided / Dip Quenching | Not Provided / Dip Quenching | Not Provided / Dip Quenching | Not Provided / Dip Quenching | Not Provided | Not Provided / Dip Quenching | Not Provided / Dip Quenching | Not Provided / Dip Quenching | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided / Dip Quenching | Not Provided / Dip Quenching | Not Provided / Dip Quenching | Not Provided / Dip Quenching | Not Provided | Not Provided / Dip Quenching | Not Provided / Dip Quenching | Not Provided | Not Provided | Not Provided / Dip Quenching | Not Provided / Dip Quenching | Not Provided / Dip Quenching | Not Provided | Not Provided | Not Provided / Dip Quenching | Not Provided / Dip Quenching | Not Provided / Dip Quenching | Dip Quenching | Not Provided / Dip Quenching | Not Provided / Dip Quenching | Not Provided / Dip Quenching |
| Material | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Aluminum | Stainless Steel | Resin | Stainless Steel | Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Stainless Steel | Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Stainless Steel | Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | - | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel |
| Insertion Guide Outer Dia. D1(mm) | 1.2 ～ 30 | - | 1 ～ 20 | 3.5 ～ 30 | 6 ～ 35 | 1 ～ 20 | 4 ～ 30 | 5.5 ～ 30 | 1.5 ～ 30 | 1 ～ 3.5 | 5.5 ～ 30 | - | 2 ～ 30 | - | 3 ～ 30 | 0.5 ～ 2.99 | 0.5 ～ 2.99 | - | - | 6.5 ～ 25 | - | 1 ～ 2.9 | 2.5 ～ 17.5 | 3.5 ～ 17.5 | 3 ～ 20 | 3 ～ 20 | - | - | 3 ～ 13 | - | - | 2.5 ～ 4 | 1 ～ 30 | 6 ～ 30 | 3 ～ 20 | 9 ～ 25 | 2.5 ～ 18 | 6.5 ～ 17.5 | 3 ～ 20 | 2 ～ 20 | 2 ～ 20 | 3.5 ～ 30 | 5 ～ 30 | 2.5 ～ 22 | 2 ～ 11 |
| Insertion Guide Tolerance | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 |
| Mounting Side Outer Dia. d(mm) | 1 ～ 20 | 0.5 ～ 3 | 2 ～ 20 | 3 ～ 20 | 6 ～ 20T | 2 ～ 20 | 3 ～ 20 | 5 ～ 20T | 1 ～ 20 | - | 5 ～ 20T | 1 ～ 20 | 2 ～ 20 | 1 ～ 20 | 3 ～ 20 | 0.51 ～ 3 | 0.51 ～ 3 | 2 ～ 10 | 3 ～ 10 | 6 ～ 16 | 0.5 ～ 3 | - | 2 ～ 12 | 3 ～ 12 | 5 ～ 20 | 5 ～ 20 | 5 ～ 20T | 1 ～ 20 | 6 ～ 12 | 5 ～ 20T | 5 ～ 20 | 5 ～ 6 | 1 ～ 20 | 3 ～ 20 | 5 ～ 20T | - | 2 ～ 12 | 6 ～ 12 | 5 ～ 20 | 3 ～ 20 | 3 ～ 20 | 3 ～ 20 | 3 ～ 20 | 2 ～ 20 | 3 ～ 10 |
| Mounting Side Tolerance | g6 ～ p6 | 0/-0.01 | m6 ～ p6 | g6 | g6 | m6 ～ p6 | g6 | g6 | m6 ～ p6 | - | g6 | 0/-0.005 ～ h7 | m6 ～ p6 | 0/-0.005 ～ h7 | g6 | 0/-0.01 | 0/-0.01 ～ 0.005/0 | m6 ～ p6 | g6 | g6 | 0/-0.01 | m6 | g6 ～ h7 | g6 ～ h7 | g6 | h7 | g6 ～ h7 | 0/-0.005 ～ h7 | g6 ～ h7 | g6 ～ h7 | g6 | g6 | 0/-0.005 ～ h7 | g6 | g6 | 0/-0.01 | g6 ～ h7 | g6 ～ h7 | g6 ～ h7 | 0/-0.005 ～ h7 | g6 | - | g6 | g6 ～ m6 | g6 |
| Cleaning Method | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Degreasing / Precision Cleaning / Electrolytic Polishing + Precision Cleaning | - | - | - | - | - | - | - | No Cleaning | - | - | - | Degreasing / Precision Cleaning / Electrolytic Polishing + Precision Cleaning | - | - | - | No Cleaning | - | - | - | - | - | - | - | - |
![[Clean & Pack] Small Diameter Locating Pin - Straight](http://content.misumi-ec.com/image/upload/t_product_view_c/v1/p/jp/product/series/110310664829/110310664829_001_20230911105917.jpg?$product_view_c$)
![[Clean & Pack] Locating Pin - Large Head, Tapered, Taper Angle Configurable, Tolerance Selectable, Press Fit](http://content.misumi-ec.com/image/upload/t_product_view_c/v1/p/jp/product/series/110310664919/110310664919_001_20230911105917.jpg?$product_view_c$)
Loading...
Configure
Specification/Dimensions
-
Environmentally friendly
-
Characteristics/Applications
-
Insertion Guide Tip Shape
-
Round -
Diamond -
Triangle
-
-
Insertion Guide Tip Type
-
Tapered -
Round Tapered -
Taper R -
R -
Spherical -
Flat -
Ball End -
Bullet Nose
-
-
Material Details
- High Strength Stainless Steel (35 HRC or more)
- SUS304
- SUS304 Equiv.
- SUS440C or 13Cr Stainless Steel
- SKS3 (Including equivalent materials)
- S45C (Including equivalent materials)
- SUS316
-
Insertion Guide Specifications
-
Not Provided -
With Screw Mount Hole -
With Hex Socket -
With Flathead Slot -
Tapped
-
-
Mounting Side Shape
-
Straight (Press-Fit) -
Tapped -
Threaded -
Circumference Groove -
Notch -
Set Screw Flat
-
-
Surface Treatment
- Not Provided
- Black Oxide
- Electroless Nickel Plating
- Hard Chrome Plating
- Buffed
- Hard Chrome Plating + Buffed
- Anodize
- Polishing
- Isonite Treatment
-
Heat Treatment
- Not Provided
- Carburized
- Dip Quenching
-
Material
- Steel
- Stainless Steel
- Resin
- Aluminum
-
Insertion Guide Outer Dia. D1(mm)
-
Insertion Guide Tolerance
-
Mounting Side Outer Dia. d(mm)
-
Mounting Side Tolerance
-
Cleaning Method
- Degreasing
- Precision Cleaning
- Electrolytic Polishing + Precision Cleaning
- No Cleaning
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
Days to Ship
-
- All
- 1 Day(s) or Less
- 2 Day(s) or Less
- 3 Day(s) or Less
- 4 Day(s) or Less
- 5 Day(s) or Less
- 6 Day(s) or Less
- 7 Day(s) or Less
- 8 Day(s) or Less
- 9 Day(s) or Less
- 11 Day(s) or Less
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy