(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Locating Pins（Insertion Guide Tip Type：Tapered Page2）
Basic Shape
-
Large Head -
Small Head -
Straight / Air Vent -
Shouldered -
Screw Mounted -
Flanged -
Double-Stepped -
Straight
-
Days to Ship: 4 Day(s) -
Days to Ship: 4 Day(s) -
Locating Pins - Large Head, Tapered - Threaded, Hex Socket
MISUMI
- Locating Pins - Large Head, Tapered - Threaded, Hex Socket from MISUMI.
- Hex Socket is attached to the tip of Large Head, Tapered, Threaded. It is easy to mount as you can stop the head rotation.
- The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
- SUS440C or 13Cr stainless has an identification groove at any position on D part.
- The tightening torque (ref. value) for hardened products is strength class 8.8. Not applicable when using locking materials or lock washers.Days to Ship: 3 Day(s) or more -
Locating Pins - Shouldered (Tapered, Tapped)
MISUMI
- Locating Pins - Shouldered (Tapered, Tapped) from MISUMI.
- Shouldered with the shape designed to be mounted from back using bolts. Improved maintainability compared to Press Fit Type.
- The material of locating pin can be selected 2 types, steel SKS3 Equivalent, stainless steel SUS304.
- A machining step remains on the shoulder top for Diamond shape.
- SUS304 may not be polished and may have no centering hole.
- The tightening torque (ref. value) for hardened products is strength class 8.8. Not applicable when using locking materials or lock washers.- Volume Discount
Days to Ship: 3 Day(s) or more -
MISUMI
"The pin body is secured by the bolts. Can be used even on portions where the tapped screws cannot be used, because the bolt can be tightened from the top of the insertion guide."
Days to Ship: 3 Day(s) or more -
Locating Pins - High Hardness Stainless Steel Large Head, Tapered (Press Fit)
MISUMI
- Locating Pins - High Hardness Stainless Steel Large Head, Tapered (Press Fit) from MISUMI.
- Large Head Tapered with each dimension configurable. We reduced the price drastically compared to the conventional products.
- The material of this locating pin is made of High hardness stainless steel with a hardness level at 35HRC~.
- If the diameter exceeds Ø10, core hardness may be 30HRC~.
- For high hardness stainless steel large head tapered type, the configurable range of dimensions has been further widened and the number of available alterations has been increased.Days to Ship: 6 Day(s) or more -
Height Adjusting Pins - Counterbored
MISUMI
- Height Adjusting Pins – Counterbored from MISUMI.
- Small Head, Tapered, with each dimension configurable. The tolerances on both ends and the tapered dimensions are also configurable.
- The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
- Polished, centering hole is sometimes not available for SUS304.
- SUS440C or 13Cr stainless has an identification groove at any position on D part.
- Hard Chrome Plating products are not available in Precision Grade Tolerance.- Volume Discount
Days to Ship: 3 Day(s) or more -
Locating Pins - Shouldered-Taper Angle (D,P Tolerance Selectable-Threaded)
MISUMI
[Features]You can freely specify dimensions of shoulder type respective parts. It is attached with a male thread.
Days to Ship: 3 Day(s) or more -
Locating Pins - Shouldered (Tapered - Shoulder Thickness Configurable-Threaded)
MISUMI
- Locating Pins - Shouldered (Tapered - Shoulder Thickness Configurable-Threaded) from MISUMI.
- SUS440C or 13Cr stainless has an identification groove on D part.
- A machining step remains on the shoulder top for Diamond Shape.
- SUS304 may not be polished and may have no centering hole.
- You can specify shoulder type flange thickness and flange diameter. It is attached with a male thread.
- The tightening torque (ref. value) for hardened products is strength class 8.8. Not applicable when using locking materials or lock washers.Days to Ship: 3 Day(s) or more -
Locating Pins - Air Vent (Threaded)
MISUMI
[Features]Since there is an air groove, it is easy to insert a pin. It is attached with a male thread.
- Volume Discount
Standard Price: MYR 14.33- Days to Ship: 4 Day(s) or more -
Locating Pin High Hardness Stainless Steel Straight Tip Shape Selection -Press Fit-
MISUMI
Straight Type with the diameter configurable in 0.01 mm increments has been newly offered. For orders of up to 1,000 pcs., 7th day shipping is available.
Days to Ship: 6 Day(s) or more -
One-Touch Flex Locator, Cam Handle Type (Pin)
IMAO
- ONE-TOUCH FLEX LOCATOR CLAMPERS (Cam Handle) from IMAO CORPORATION.
- The shape of tips can be selected 2 types, Tapered pin (CP731-LC), Straight pin (CP731-SC).
- The body of ONE-TOUCH FLEX LOCATOR CLAMPERS is made of SCM440 steel Nitrocarburized.
- The Cam Handle of ONE-TOUCH FLEX LOCATOR CLAMPERS is made of SCM440 steel, Black oxide finished, Quenched & tempered.
- The ball of ONE-TOUCH FLEX LOCATOR CLAMPERS is made of SUJ2 steel.
- Clamping and unclamping by cam handle.Standard Price: MYR 1,398.44- Days to Ship: 9 Day(s) -
Locating Pins - Tip Shape Selectable (Configurable Shoulder Thickness-Threaded)
MISUMI
- Locating Pins - Tip Shape Selectable (Configurable Shoulder Thickness-Threaded) from MISUMI.
- The tip shape and the fixed shape of the Shouldered type are selectable from three types respectively.
- The material of pin can be selected 4 types, steel SKS3 Equivalent, S45C, stainless steel SUS304, SUS440C or 13Cr stainless.
- SUS304 may not be polished and may have no centering hole.
- SUS440C or 13Cr stainless has an identification groove at any position on D part.
- A machining step remains on the shoulder top for Diamond shape.- Volume Discount
Days to Ship: 4 Day(s) or more -
Flanged Locating Pins - Flange Mounted
MISUMI
Locating Pins having the flange shaped for mount. The flange can be fixed with a screw.
Days to Ship: 8 Day(s) or more -
Locating Pins - Plastic, Screw Mounted
MISUMI
[Features]Resin positioning pin that can be bolted. Scratches can be prevented.
Days to Ship: 5 Day(s) or more -
Feed Pins - Shouldered - Threaded
MISUMI
Locating Pins with the tapered part configurable to be longer. The Shoulder supports the workpiece so that it will not damage the base.
Days to Ship: 7 Day(s) -
Locating Pins - Plastic, Large Head - Press Fit
MISUMI
- Locating Pins - Plastic, Large Head - Press Fit from MISUMI.
- Plastic Locating Pins which prevent workpiece damage.
- Insertion guide tip type can be selected 3 types, Tapered, Flat and Spherical.
- The outer diameter tolerance is the result of measurement at room temperature.
- The material of locating pin can be selected 4 types, Polyacetal (Black), MC Nylon (Blue), Conductive MC Nylon CDR2 (Black), or PEEK (Natural Ivory).
- The mounting method is press fit, with m6 tolerance.Days to Ship: 6 Day(s) or more -
Locating Pins - Large/Small Head, Tapered (Set Screw-Set Screw Flat Shape)
MISUMI
- Locating Pins - Large/Small Head, Tapered (Set Screw-Set Screw Flat Shape) from MISUMI.
- Large Head/Small Head, Tapered, Set Screw Type. Selectable from Circumference Groove, Notched and Set Screw Flat Shapes.
- The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
- SUS440C or 13Cr stainless has an identification groove at any position on D part.
- SUS304 may not be polished and may have no centering hole.Days to Ship: 3 Day(s) or more -
Locating Pins - Shouldered-Taper Angle (D,P Tolerance Selectable-Tapped)
MISUMI
[Features]You can freely specify dimensions of shoulder type respective parts. It is attached with a female thread.
- Volume Discount
Days to Ship: 3 Day(s) or more -
Locating Pins - Shouldered (Set Screw-Circumference Groove)
MISUMI
- Locating Pins - Shouldered (Set Screw-Circumference Groove) from MISUMI.
- Insertion guide tip shape can be selected 2 types, round, and diamond.
- Shouldered Set Screw Type. Selectable from Circumference Groove (JPGJ), Notched (JPCJ) and Set Screw Flat Shapes (JPDJ).
- A machining step remains on the shoulder top for Diamond Shape.
- Locating Pins is made of SKS3 Equivalent with hardness level at 60~63HRC.
- Pins of D dimension with S are for space-saving with shorter mounting parts (L and ℓ1). (Actual D dimension is the number without "S".)Days to Ship: 3 Day(s) -
Positioning Pin - High Hardness Stainless Steel, Shouldered, Tepered Press Fit
MISUMI
Shouldered and Tapered Type has been newly added to the High Hardness Stainless Steel Locating Pin product line-up. For orders of up to 500 pcs., 5th day shipping is available.
Days to Ship: 6 Day(s) or more -
Locating Pins Large Head, Tapered, Press Fit, Standard
MISUMI
This is an economy item, The price is cheaper than the MISUMI standard product.
- Volume Discount
- RoHS
Days to Ship: 4 Day(s) or more -
Locating Pins - Small Head, Tapered (Tapped)
MISUMI
- Locating Pins - Small Head, Tapered (Tapped) from MISUMI.
- Small Head, Tapered with the shape designed to be mounted from back using bolts. Improved maintainability compared to Press Fit Type.
- The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
- Polished, centering hole is sometimes not available for SUS304.
- SUS440C or 13Cr stainless has an identification groove at any position on D part.
- Insertion guide tip shape can be selected 2 types, round, and diamond.- Volume Discount
Days to Ship: 2 Day(s) or more -
Locating Pins - Plastic, Small Head
MISUMI
- Locating Pins - Plastic, Small Head from MISUMI.
- A Small Head Plastic Locating Pins which prevent workpiece damages.
- Insertion guide tip type can be selected 3 types, Tapered, Flat and Spherical.
- The outer diameter tolerance is the result of measurement at room temperature.
- The material of locating pin can be selected 4 types, Polyacetal (Black), MC Nylon (Blue), Conductive MC Nylon CDR2 (Black), or PEEK (Natural Ivory).
- The mounting method is press fit, with m6 tolerance.Days to Ship: 6 Day(s) or more -
MISUMI
- Feed Pins - Solid - Press Fit from MISUMI.
- Length of tapered part can be specified depending on applications or environment. It is installed by press-fitting.
- The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
- SUS304 feed Pins may not be polished and may have no centering hole.
- The outer diameter of the mounting part can be selectable from 2 mm to 10 mm.
- The outer diameter of the feed pin tip can be selectable from 2.5 mm to 13 mm.Days to Ship: 7 Day(s) -
Small Diameter Locating Pin - Shouldered, Threaded
MISUMI
- Small Diameter Locating Pin - Shouldered, Threaded from MISUMI.
- Insertion Guide Tip Type can be selected 4 types, Tapered, Taper R, Spherical and Flat.
- The material of pin can be selected 2 types, SK95 (SK4) Equivalent and SUS304.
- The hardness of steel pin is 50～58HRC.
- SUS304 may not be polished.
- When L=0, an undercut will be added at the neck of the thread.
- Shaft diameter can be selected up to 4 mm.Days to Ship: 6 Day(s) or more -
Locating Pins - High Hardness Stainless Steel Large Head, Tapered (Tapped)
MISUMI
Large Head Tapered with each dimension configurable. We reduced the price drastically compared to the conventional products.
Days to Ship: 6 Day(s) or more -
Locating Pins - Large Head Tapered (Plastic Tip - Press Fit)
MISUMI
- Locating Pins - Large Head Tapered (Plastic Tip - Press Fit) from MISUMI.
- Plastic material bonded to the tip of insertion guide prevents the workpiece from being scratched.
- SUS304 locating Pins may not be polished and may have no centering hole.
- The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
- The tightening torque (ref. value) for hardened products is strength class 8.8. Not applicable when using locking materials or lock washers.Days to Ship: 8 Day(s) or more -
Locating Pins - Plastic, Large Head - Tapped
MISUMI
Plastic Locating Pins which prevent workpiece damages.
Days to Ship: 6 Day(s) or more -
Height Adjusting Pins - Press Fit
MISUMI
- Height Adjusting Pins - Press Fit from MISUMI.
- Small Head, Tapered, with each dimension configurable. The tolerances on both ends and the tapered dimensions are also configurable.
- The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
- Polished, centering hole is sometimes not available for SUS304.
- SUS440C or 13Cr stainless has an identification groove at any position on D part.
- Hard Chrome Plating products are not available in Precision Grade Tolerance.- Volume Discount
Days to Ship: 3 Day(s) or more -
Locating Pins - Large/Small Head, Tapered (Set Screw-Circumference Groove Shape)
MISUMI
- Locating Pins - Large/Small Head, Tapered (Set Screw-Circumference Groove Shape) from MISUMI.
- Large Head/Small Head, Tapered, Set Screw Type. Selectable from Circumference Groove, Notched and Set Screw Flat Shapes.
- Insertion guide tip shape can be selected 2 types, round, and diamond.
- SUS440C or 13Cr stainless has an identification groove at any position on D part.
- SUS304 may not be polished and may have no centering hole.
- The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.Days to Ship: 3 Day(s) or more -
Locating Pins - Shouldered-Taper Angle (D,P Tolerance Selectable-Press Fit)
MISUMI
- Locating Pins - Shouldered-Taper Angle (D, P Tolerance Selectable-Press Fit) from MISUMI.
- Shouldered with each dimension configurable.
- Pin’s mounting method can be selected 3 types, Thread, Tapped or Press fit.
- The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
- SUS440C or 13Cr stainless has an identification groove at any position on D part.
- SUS304 may not be polished and may have no centering hole.Days to Ship: 3 Day(s) or more -
Locating Pins - Shouldered (Set Screw-Notch Shape)
MISUMI
Shouldered Set Screw Type. Selectable from Circumference Groove, Notched and Set Screw Flat Shapes.
Days to Ship: 3 Day(s) -
![[Clean & Pack] Locating Pin - Large Head, Tapered, Threaded](//content.misumi-ec.com/image/upload/t_product_view_b/v1/p/jp/product/series/110310664559/110310664559_001_20230911105917.jpg?$product_view_b$)
[Clean & Pack] Locating Pin - Large Head, Tapered, Threaded
MISUMI
Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.■Part Number for Clean & Pack Products·Degreasing (Anti-rust single packing) : Part Number SL-□□ ·Precision cleaning (Degassing double packing) : Part Number SH-□□ ·Electrolytic polishing + precision cleaning (Degassing double packing) : Part Number SHD-□□ Product Part Number Cleaning Method Packaging Type Effects Compared to Uncleaned Product Environment (Standard) Process SL-□□ Degreasing Anti-rust packing Oil removal General environment Regular assembly process Post battery assembly process SH-□□ Precision cleaning Degassing double packing Oil removal
Dust removalClean environment (Class 10 to 1,000) Battery assembly process LCD-related post assembly process In-vehicle camera assembly process SHD-□□ Electrolytic polishing + precision cleaning Degassing double packing Oil removal
Dust removal
Outgas reductionVacuum environment
Clean environment (Class 10 to 1,000)Pre-semiconductor process Liquid crystal deposition process Pre-OLED process ■Notes
Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.- Volume Discount
Days to Ship: 6 Day(s) or more -
![[Clean & Pack] Locating Pin - Small Head, Tapered, Press Fit](//content.misumi-ec.com/image/upload/t_product_view_b/v1/p/jp/product/series/110310664649/110310664649_001_20230911105917.jpg?$product_view_b$)
[Clean & Pack] Locating Pin - Small Head, Tapered, Press Fit
MISUMI
Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.■Part Number for Clean & Pack Products·Degreasing (Anti-rust single packing) : Part Number SL-□□ ·Precision cleaning (Degassing double packing) : Part Number SH-□□ ·Electrolytic polishing + precision cleaning (Degassing double packing) : Part Number SHD-□□ Product Part Number Cleaning Method Packaging Type Effects Compared to Uncleaned Product Environment (Standard) Process SL-□□ Degreasing Anti-rust packing Oil removal General environment Regular assembly process Post battery assembly process SH-□□ Precision cleaning Degassing double packing Oil removal
Dust removalClean environment (Class 10 to 1,000) Battery assembly process LCD-related post assembly process In-vehicle camera assembly process SHD-□□ Electrolytic polishing + precision cleaning Degassing double packing Oil removal
Dust removal
Outgas reductionVacuum environment
Clean environment (Class 10 to 1,000)Pre-semiconductor process Liquid crystal deposition process Pre-OLED process ■Notes
Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.- Volume Discount
Days to Ship: 6 Day(s) or more -
![[Clean & Pack] Locating Pin - Tip Shape Selectable, Threaded](//content.misumi-ec.com/image/upload/t_product_view_b/v1/p/jp/product/series/110310664739/110310664739_001_20230911105917.jpg?$product_view_b$)
[Clean & Pack] Locating Pin - Tip Shape Selectable, Threaded
MISUMI
Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.■Part Number for Clean & Pack Products·Degreasing (Anti-rust single packing) : Part Number SL-□□ ·Precision cleaning (Degassing double packing) : Part Number SH-□□ ·Electrolytic polishing + precision cleaning (Degassing double packing) : Part Number SHD-□□ Product Part Number Cleaning Method Packaging Type Effects Compared to Uncleaned Product Environment (Standard) Process SL-□□ Degreasing Anti-rust packing Oil removal General environment Regular assembly process Post battery assembly process SH-□□ Precision cleaning Degassing double packing Oil removal
Dust removalClean environment (Class 10 to 1,000) Battery assembly process LCD-related post assembly process In-vehicle camera assembly process SHD-□□ Electrolytic polishing + precision cleaning Degassing double packing Oil removal
Dust removal
Outgas reductionVacuum environment
Clean environment (Class 10 to 1,000)Pre-semiconductor process Liquid crystal deposition process Pre-OLED process ■Notes
Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.Days to Ship: 6 Day(s) or more -
Days to Ship: 4 Day(s) -
![[Clean & Pack]Pusher Pins - Straight](//my.misumi-ec.com/linked/material/mech/MSM1/PHOTO/110311036619_001.jpg?$product_view_b$)
[Clean & Pack]Pusher Pins - Straight
MISUMI
There is no discoloration or dimensional change due to cleaning.
Days to Ship: 6 Day(s) or more -
IMAO
High cost / performance ratio diamond.
[Features]
· Removable with a pin extractorStandard Price: MYR 75.60- Days to Ship: 5 Day(s) or more -
IMAO
Positioning part. A straight pin with high cost-effectiveness. Main Body: hardening and tempering, polishing finish
Standard Price: MYR 37.32- Days to Ship: 1 Day(s) or more -
IMAO
A stepped diamond pin for positioning parts. Main Body: Hardened and tempered and polished finish.
Standard Price: MYR 88.48- Days to Ship: 5 Day(s) or more -
Spring Pin (High-Accuracy Series) (CP710-A, CP710-B)
IMAO
- Spring Pin (High-Accuracy Series) (CP710-A, CP710-B) from IMAO CORPORATION.
- This product series can be selected into 2 types, CP710-A (Standard type), or CP710-B (Supporter type).
- The main body of this product is made of S45C Hardening and tempering with Black oxide coating.
- The pin of this product is made of SK95, Hardening and tempering Heat Treatment.
- It is optimal for positioning cast holes in die-cast aluminum.
- The tolerance of mounted side outer diameter g6.Standard Price: MYR 721.71- Days to Ship: 7 Day(s) or more -
Days to Ship: 7 Day(s) -
Locating Pins - Large Head, Tapered - Screw Mounted, Standard / Compact
MISUMI
- Locating Pins - Large Head, Tapered - Screw Mounted, Standard / Compact from MISUMI.
- Large Head, Tapered. The hollow area is a screw hole. Improved maintainability compared to the press fit type.
- The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
- SUS440C or 13Cr stainless has an identification groove at any position on D part.
- The tightening torque (ref. value) for hardened products is strength class 8.8. Not applicable when using locking materials or lock washers.Days to Ship: 3 Day(s) or more -
Locating Pins - Shouldered (Tapered Press Fit)
MISUMI
- Locating Pins - Shouldered (Tapered Press Fit) from MISUMI.
- Shouldered Standard Tapered Head allows for height adjustment of the locating target.
- Insertion guide tip shape can be selected 2 types, round, and diamond.
- SUS440C or 13Cr stainless has an identification groove on D part.
- A machining step remains on the shoulder top for Diamond Shape.
- SUS304 may not be polished and may have no centering hole.
- The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.Days to Ship: 3 Day(s) or more
![[Clean & Pack] Locating Pin - Large Head, Tapered, Threaded](http://content.misumi-ec.com/image/upload/t_product_view_b/v1/p/jp/product/series/110310664559/110310664559_001_20230911105917.jpg?$product_view_b$)
![[Clean & Pack] Locating Pin - Small Head, Tapered, Press Fit](http://content.misumi-ec.com/image/upload/t_product_view_b/v1/p/jp/product/series/110310664649/110310664649_001_20230911105917.jpg?$product_view_b$)
![[Clean & Pack] Locating Pin - Tip Shape Selectable, Threaded](http://content.misumi-ec.com/image/upload/t_product_view_b/v1/p/jp/product/series/110310664739/110310664739_001_20230911105917.jpg?$product_view_b$)
![[Clean & Pack]Pusher Pins - Straight](http://my.misumi-ec.com/linked/material/mech/MSM1/PHOTO/110311036619_001.jpg?$product_view_b$)
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Specifications |
| Basic Shape |
| Environmentally friendly |
| Characteristics/Applications |
| Insertion Guide Tip Shape |
| Insertion Guide Tip Type |
| Material Details |
| Insertion Guide Specifications |
| Mounting Side Shape |
| Surface Treatment |
| Heat Treatment |
| Material |
| Insertion Guide Outer Dia. D1(mm) |
| Insertion Guide Tolerance |
| Mounting Side Outer Dia. d(mm) |
| Mounting Side Tolerance |
| Cleaning Method |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | IMAO | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | IMAO | IMAO | IMAO | IMAO | MISUMI | MISUMI | MISUMI |
| Product Series | Locating Pins - High Hardness Stainless Steel Large Head, Tapered (Press Fit) | Locating Pins - Shouldered-Taper Angle (D,P Tolerance Selectable-Threaded) | Locating Pins - Shouldered (Tapered - Shoulder Thickness Configurable-Threaded) | Locating Pin High Hardness Stainless Steel Straight Tip Shape Selection -Press Fit- | Locating Pins - Tip Shape Selectable (Configurable Shoulder Thickness-Threaded) | Locating Pins - Large/Small Head, Tapered (Set Screw-Set Screw Flat Shape) | Locating Pins - Shouldered-Taper Angle (D,P Tolerance Selectable-Tapped) | Positioning Pin - High Hardness Stainless Steel, Shouldered, Tepered Press Fit | Locating Pins - High Hardness Stainless Steel Large Head, Tapered (Tapped) | Locating Pins - Large Head Tapered (Plastic Tip - Press Fit) | Locating Pins - Large/Small Head, Tapered (Set Screw-Circumference Groove Shape) | Locating Pins - Shouldered-Taper Angle (D,P Tolerance Selectable-Press Fit) | [Clean & Pack] Locating Pin - Small Head, Tapered, Press Fit | [Clean & Pack] Locating Pin - Tip Shape Selectable, Threaded | Locating Pin Large Head, Selectable Tapered Angle, Selectable Tolerance, Threaded | Locating Pins - Large Head, Tapered - Screw Mounted, Standard / Compact | |||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Days to Ship | 4 Day(s) | 4 Day(s) | 3 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more | 6 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 9 Day(s) | 4 Day(s) or more | 8 Day(s) or more | 5 Day(s) or more | 7 Day(s) | 6 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more | 3 Day(s) | 6 Day(s) or more | 4 Day(s) or more | 2 Day(s) or more | 6 Day(s) or more | 7 Day(s) | 6 Day(s) or more | 6 Day(s) or more | 8 Day(s) or more | 6 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more | 3 Day(s) | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 4 Day(s) | 6 Day(s) or more | 5 Day(s) or more | 1 Day(s) or more | 5 Day(s) or more | 7 Day(s) or more | 7 Day(s) | 3 Day(s) or more | 3 Day(s) or more |
| Specifications |
|
| |||||||||||||||||||||||||||||||||||||||||||
| Basic Shape | Large Head / Small Head / Shouldered | Large Head | Large Head | Shouldered | Screw Mounted | Large Head | Small Head | Shouldered | Shouldered | Straight / Air Vent | Straight | Flanged | Shouldered | Flanged | Screw Mounted | Shouldered | Large Head | Large Head / Small Head | Shouldered | Shouldered | Shouldered | Large Head | Small Head | Small Head | Large Head | Shouldered | Large Head | Large Head | Large Head | Small Head | Large Head / Small Head | Shouldered | Shouldered | Large Head | Small Head | Large Head | Large Head | Straight | Large Head | Straight / Air Vent | Large Head | Shouldered | Large Head | Large Head | Shouldered |
| Environmentally friendly | - | - | - | RoHS Compliant (10 Substances) | RoHS Compliant (10 Substances) | RoHS Compliant (10 Substances) | RoHS Compliant (10 Substances) | RoHS Compliant (10 Substances) | - | RoHS Compliant (10 Substances) | RoHS Compliant (10 Substances) | - | RoHS Compliant (10 Substances) | - | - | - | RoHS Compliant (10 Substances) | - | - | - | - | - | RoHS Compliant (10 Substances) | - | - | - | - | - | - | - | RoHS Compliant (10 Substances) | - | - | RoHS Compliant (10 Substances) | RoHS Compliant (10 Substances) | RoHS Compliant (10 Substances) | - | RoHS Compliant (10 Substances) | - | - | - | - | - | - | - |
| Characteristics/Applications | - | - | - | Not Applicable | Not Applicable | Not Applicable | Not Applicable | Not Applicable | - | Not Applicable | Not Applicable | - | Not Applicable | - | - | - | Not Applicable | - | - | - | - | - | Not Applicable | - | - | - | - | - | - | - | Not Applicable | - | - | Clean Washed | Clean Washed | Clean Washed | - | Clean Washed | - | - | - | - | - | - | - |
| Insertion Guide Tip Shape | Round / Diamond | Round | Round / Diamond | Round / Diamond | Round | Round / Diamond | Round / Diamond | Round | Round / Diamond | Round | Round | Round | Round / Diamond | Round / Diamond | Round | Round | Round | Round / Diamond | Round | Round / Diamond | Round / Diamond | Round / Diamond | Round / Diamond | Round | Round / Triangle | Round | Round / Diamond | Round | Round | Round / Diamond | Round / Diamond | Round | Round / Diamond | Round / Diamond | Round / Diamond | Round / Diamond | Round / Diamond | Round | Diamond | Round | Diamond | Round | Round | Round / Diamond | Round / Diamond |
| Insertion Guide Tip Type | Tapered | Tapered | Tapered | Tapered | Tapered | Tapered | Tapered | Tapered | Tapered | Tapered | Tapered | Tapered | Tapered | Tapered | Tapered | Tapered | Tapered | Tapered | Tapered | Tapered | Tapered | Tapered | Tapered | Tapered | Tapered | Tapered | Tapered | Tapered | Tapered | Tapered | Tapered | Tapered | Tapered | Tapered | Tapered | Tapered | Tapered | Tapered | Tapered | Tapered | Tapered | Tapered | Tapered | Tapered | Tapered |
| Material Details | - | - | SUS304 / SUS440C or 13Cr Stainless Steel / SKS3 (Including equivalent materials) / SUS316 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | High Strength Stainless Steel (35 HRC or more) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | SUS304 / SUS440C or 13Cr Stainless Steel / SKS3 (Including equivalent materials) | SUS304 / SUS440C or 13Cr Stainless Steel / SKS3 (Including equivalent materials) |
| Insertion Guide Specifications | Not Provided | Not Provided | With Hex Socket | Not Provided | With Screw Mount Hole | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | With Screw Mount Hole | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | - | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Tapped | Tapped | Tapped | Not Provided | Not Provided | With Screw Mount Hole | Not Provided |
| Mounting Side Shape | Straight (Press-Fit) / Tapped / Threaded | Threaded | Threaded | Tapped | Straight (Press-Fit) | Straight (Press-Fit) | Tapped | Threaded | Threaded | Threaded | Straight (Press-Fit) | Straight (Press-Fit) | Straight (Press-Fit) / Tapped / Threaded | Straight (Press-Fit) | Straight (Press-Fit) | Threaded | Straight (Press-Fit) | Set Screw Flat | Tapped | Circumference Groove | Straight (Press-Fit) | Straight (Press-Fit) | Tapped | Straight (Press-Fit) | Straight (Press-Fit) | Threaded | Tapped | Straight (Press-Fit) | Tapped | Straight (Press-Fit) | Circumference Groove | Straight (Press-Fit) | Notch | Threaded | Straight (Press-Fit) | Threaded | Threaded | Tapped | Straight (Press-Fit) | Straight (Press-Fit) | Straight (Press-Fit) | Straight (Press-Fit) | Threaded | Straight (Press-Fit) | Straight (Press-Fit) |
| Surface Treatment | Not Provided / Hard Chrome Plating | Not Provided / Hard Chrome Plating | Not Provided / Hard Chrome Plating | Not Provided / Hard Chrome Plating | Not Provided / Black Oxide / Hard Chrome Plating | Not Provided | Not Provided / Hard Chrome Plating | Not Provided / Hard Chrome Plating | Not Provided / Hard Chrome Plating | Not Provided | Not Provided | Isonite Treatment | Not Provided / Black Oxide / Hard Chrome Plating | Not Provided | Not Provided | Not Provided / Hard Chrome Plating | Not Provided | Not Provided / Hard Chrome Plating | Not Provided / Hard Chrome Plating | Not Provided | Not Provided | Not Provided / Hard Chrome Plating | Not Provided / Hard Chrome Plating | Not Provided | Not Provided / Hard Chrome Plating | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided / Hard Chrome Plating | Not Provided / Hard Chrome Plating | Not Provided / Hard Chrome Plating | Not Provided | Not Provided / Hard Chrome Plating | Not Provided / Hard Chrome Plating | Not Provided / Hard Chrome Plating | Not Provided / Hard Chrome Plating | Not Provided | Polishing | Polishing | Polishing | Black Oxide | Hard Chrome Plating / Buffed | Not Provided / Hard Chrome Plating | Not Provided |
| Heat Treatment | Not Provided / Dip Quenching | Not Provided / Dip Quenching | Not Provided / Dip Quenching | Not Provided / Dip Quenching | Not Provided / Dip Quenching | Not Provided | Not Provided / Dip Quenching | Not Provided / Dip Quenching | Not Provided / Dip Quenching | Not Provided / Dip Quenching | Not Provided | Not Provided | Not Provided / Dip Quenching | Carburized | Not Provided | Not Provided / Dip Quenching | Not Provided | Not Provided / Dip Quenching | Not Provided / Dip Quenching | Dip Quenching | Not Provided | Not Provided / Dip Quenching | Not Provided / Dip Quenching | Not Provided | Not Provided / Dip Quenching | Not Provided / Dip Quenching | Not Provided | Not Provided / Dip Quenching | Not Provided | Not Provided / Dip Quenching | Not Provided / Dip Quenching | Not Provided / Dip Quenching | Dip Quenching | Not Provided | Not Provided | Not Provided | Not Provided / Dip Quenching | Not Provided | Carburized | Carburized | Carburized | Carburized | Dip Quenching | Not Provided / Dip Quenching | Not Provided / Dip Quenching |
| Material | - | - | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Stainless Steel | Steel | Steel / Stainless Steel | Steel | Resin | Steel / Stainless Steel | Resin | Steel / Stainless Steel | Steel / Stainless Steel | Steel | Stainless Steel | - | Steel / Stainless Steel | Resin | Steel / Stainless Steel | Steel / Stainless Steel | Stainless Steel | Steel / Stainless Steel | Resin | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel | Stainless Steel | Stainless Steel | Stainless Steel | - | Resin | Steel | Steel | Steel | Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel |
| Insertion Guide Outer Dia. D1(mm) | 1 ～ 20 | 3.5 ～ 30 | 6 ～ 30 | 3 ～ 20 | 9 ～ 25 | 2.5 ～ 18 | 3 ～ 20 | 2 ～ 20 | 2 ～ 20 | 5 ～ 12 | - | 18 ～ 28 | 2.5 ～ 22 | 6 ～ 20 | 8 ～ 16 | 2 ～ 11 | 1.5 ～ 15 | 5 ～ 30 | 4 ～ 20 | 2 ～ 20 | 2 ～ 13 | 2.5 ～ 30 | 3 ～ 20 | 1 ～ 10 | 2.5 ～ 13 | 1 ～ 7 | 6.5 ～ 17.5 | - | 6.5 ～ 13 | 1 ～ 20 | 2 ～ 30 | 1 ～ 20 | 5 ～ 30 | 3.5 ～ 30 | 1 ～ 20 | 4 ～ 30 | - | 6 ～ 25 | 6 ～ 25 | 6 ～ 25 | 8 ～ 25 | 6 ～ 16.5 | 6 ～ 30 | 11 ～ 30 | 1 ～ 20 |
| Insertion Guide Tolerance | 0/-0.02 | 0/-0.2 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 ～ h7 | 0/-0.01 ～ h7 | 0/-0.01 | g6 | g6 ～ h7 | g6 | 0/-0.01 | g6 | 0/-0.2 ～ 0/-0.05 | 0/-0.01 | 0/-0.05 | 0/-0.01 | 0/-0.01 ～ h7 | 0/-0.01 | - | 0/-0.02 | 0/-0.01 | 0/-0.05 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.05 | 0/-0.01 ～ h7 | 0/-0.01 | 0/-0.01 ～ h7 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | - | 0/-0.3 | h6 | h6 | h6 | - | 0/-0.01 | 0/-0.01 | 0/-0.01 |
| Mounting Side Outer Dia. d(mm) | 2 ～ 20 | - | 3 ～ 20 | 5 ～ 20T | - | 2 ～ 12 | 5 ～ 20 | 3 ～ 20 | 3 ～ 20 | 3 ～ 6 | 3.01 ～ 25.5 | 39 ～ 56 | 2 ～ 20 | 10 ～ 20 | - | 3 ～ 10 | 1 ～ 10 | 6 ～ 20 | 6 ～ 20 | 6 ～ 20 | 3 ～ 12 | 2 ～ 20 | 5 ～ 20T | 2 ～ 10 | 2 ～ 10 | 2 ～ 4 | 6 ～ 12 | 5 ～ 20 | 6 ～ 10 | 2 ～ 20 | 6 ～ 20 | 2 ～ 20 | 6 ～ 20 | 2 ～ 20 | 2 ～ 20 | 3 ～ 20 | 3 ～ 20 | 6 ～ 25 | 6 ～ 25 | 6 ～ 25 | 5 ～ 18 | 15 ～ 25 | 5 ～ 20 | 10 ～ 20 | 2 ～ 20 |
| Mounting Side Tolerance | - | - | g6 | g6 | 0/-0.01 | g6 ～ h7 | g6 ～ h7 | 0/-0.005 ～ h7 | g6 | g6 | g6 ～ h7 | - | g6 ～ m6 | 0/-0.005 | 0/-0.2 ～ 0/-0.05 | g6 | m6 | g6 | g6 ～ h7 | g6 | g6 ～ h7 | - | g6 | m6 | m6 | 0/-0.005 | g6 ～ h7 | m6 ～ p6 | g6 | 0/-0.005 ～ h7 | g6 | 0/-0.005 ～ h7 | g6 | g6 | m6 ～ p6 | g6 | - | 0/-0.3 | h6 | h6 | p6 | g6 | g6 ～ p6 | g6 | m6 |
| Cleaning Method | - | - | - | - | - | No Cleaning | - | - | - | - | No Cleaning | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | No Cleaning | - | - | - | - | - | - | Degreasing / Precision Cleaning / Electrolytic Polishing + Precision Cleaning | Degreasing / Precision Cleaning / Electrolytic Polishing + Precision Cleaning | Degreasing / Precision Cleaning / Electrolytic Polishing + Precision Cleaning | - | Degreasing / Precision Cleaning | - | - | - | - | - | - | - |
![[Clean & Pack] Locating Pin - Large Head, Tapered, Threaded](http://content.misumi-ec.com/image/upload/t_product_view_c/v1/p/jp/product/series/110310664559/110310664559_001_20230911105917.jpg?$product_view_c$)
![[Clean & Pack] Locating Pin - Small Head, Tapered, Press Fit](http://content.misumi-ec.com/image/upload/t_product_view_c/v1/p/jp/product/series/110310664649/110310664649_001_20230911105917.jpg?$product_view_c$)
![[Clean & Pack] Locating Pin - Tip Shape Selectable, Threaded](http://content.misumi-ec.com/image/upload/t_product_view_c/v1/p/jp/product/series/110310664739/110310664739_001_20230911105917.jpg?$product_view_c$)
![[Clean & Pack]Pusher Pins - Straight](http://my.misumi-ec.com/linked/material/mech/MSM1/PHOTO/110311036619_001.jpg?$product_view_c$)
Loading...
Configure
Specification/Dimensions
-
Environmentally friendly
-
Characteristics/Applications
-
Insertion Guide Tip Shape
-
Round -
Diamond -
Triangle
-
-
Insertion Guide Tip Type
-
Tapered -
Round Tapered -
Taper R -
R -
Spherical -
Flat -
Ball End -
Bullet Nose
-
-
Material Details
- High Strength Stainless Steel (35 HRC or more)
- SUS304
- SUS304 Equiv.
- SUS440C or 13Cr Stainless Steel
- SKS3 (Including equivalent materials)
- S45C (Including equivalent materials)
- SUS316
-
Insertion Guide Specifications
-
Not Provided -
With Screw Mount Hole -
With Hex Socket -
With Flathead Slot -
Tapped
-
-
Mounting Side Shape
-
Straight (Press-Fit) -
Tapped -
Threaded -
Circumference Groove -
Notch -
Set Screw Flat
-
-
Surface Treatment
- Not Provided
- Black Oxide
- Electroless Nickel Plating
- Hard Chrome Plating
- Buffed
- Hard Chrome Plating + Buffed
- Anodize
- Polishing
- Isonite Treatment
-
Heat Treatment
- Not Provided
- Carburized
- Dip Quenching
-
Material
- Steel
- Stainless Steel
- Resin
- Aluminum
-
Insertion Guide Outer Dia. D1(mm)
-
Insertion Guide Tolerance
-
Mounting Side Outer Dia. d(mm)
-
Mounting Side Tolerance
-
Cleaning Method
- Degreasing
- Precision Cleaning
- Electrolytic Polishing + Precision Cleaning
- No Cleaning
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
Days to Ship
-
- All
- 1 Day(s) or Less
- 2 Day(s) or Less
- 3 Day(s) or Less
- 4 Day(s) or Less
- 5 Day(s) or Less
- 6 Day(s) or Less
- 7 Day(s) or Less
- 8 Day(s) or Less
- 9 Day(s) or Less
- 11 Day(s) or Less
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy