(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Standard Linear Guides（Page2）
| Days to Ship |
|
|---|
-
![[Individual Block Units] Full-Ball Type LM Guide, Radial, SR Type](//my.misumi-ec.com/linked/material/mech/THK1/PHOTO/221000474370_001.jpg?$product_view_b$)
[Individual Block Units] Full-Ball Type LM Guide, Radial, SR Type
THK
An individual block item from the THK LM guide SR series. Extremely useful for sudden design changes and when performing maintenance.
[Features]
· Circulates the ball row using the end plate that is assembled
· in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.
· The ball will not fall out even if the LM block is removed from the LM rail because it is held by a holding plate.
· Has a low cross-section height, and the LM block has been designed with a high rigidity, which allows for highly precise and consistent linear motion.
· Compact / radial type: A compact type with a low cross-sectional height, which is ideal for horizontal guide parts for ball contact structures that are strong against loads in the radial direction.Standard Price: MYR 416.83- Days to Ship: 4 Day(s) or more -
Miniature Eco Guide (EGM, EGM-L Series)
OZAK
[Features]
・ Since all parts are composed of stainless steel and plastic, it is ideal under operating environments where rust should be avoided
・ The minimum allowable compact design and weight reduction have been designed, making it ideal for high-speed operation
・ The ball rolling surface is designed in a gothic arch shape that can receive high load capacity, so it maintains a long lifespan
・ Lubrication holes are provided on both sides of the bearing carriage to simplify maintenance. It is recommended to supply grease regularly- CAD ：
- 2D
Days to Ship: 14 Day(s) or more -
Linear Guides for Medium/Heavy Load - With Dowel Holes, Normal Clearance
MISUMI
Linear Guides for Medium/Heavy Load - With Dowel Holes, Normal Clearance
These linear guides or linear slide are factory automation components. They offer a wide variety of sizes to choose from.
[Feature]
● Rail Length Minimum/Maximum (mm.): 100 and 1960
● Assembly Height (mm.): 24, 28, and 33
● Block Type : Block with Dowel holes
● Material: Carbon Steel 58HRC
[Application]
It is used in a variety of machines such as CNC machines, 3D printers, measuring instruments, and so on.Days to Ship: 8 Day(s) -
Caged Ball LM Guide, Radial Type, SSR Type
THK
Radial type that is strong against loads in the radial direction. More advantageous than SHS when incurring loads in the radial direction (longevity, precision, rigidity, etc.). A stainless steel type not featured with the SHS is also available.
*When ordering multiple shaft types, input multiples of the number of required shafts as the order quantity.
(Example) required shafts: 2(-II)⇒ Order quantity: "2, 4, 6..."
Required shafts: 3 3(-III)⇒ Order quantity: "3, 6, 9..."
Please place your orders in this manner.Days to Ship: 38 Day(s) or more -
H Type Economy Guide (EGH, EGH-L)
OZAK
[Features]
・ A side seal is provided as standard to enhance dust-proofness. Longer lifespan can be expected because foreign objects are further prevented from entering
・ The weight of the rail has been reduced by reviewing the height and cross-sectional shape
・ The lubrication performance has been improved compared to conventional products by reviewing the grease supply path and installing a grease reservoir in the ball circulation path
・ Since the bearing and rail have complete compatibility, there is no need to put a matching mark between the bearing, rail, etc., and assembly time can be shortened
・ The ball built into the bearing has a structure that does not fall out, so there is no risk of the ball falling out, but when assembling the bearing into the rail, insert it slowly in parallel
・ The rail length is standardized so that it can be used for all rail lengths and that the mounting hole pitch positions are symmetrical
・ The bearing is shipped with lithium soap-based grease sealed, but the manufacturer recommends that you regularly replenish the grease because there are lubrication holes on both sides- CAD ：
- 2D
Days to Ship: 21 Day(s) or more -
MISUMI
Linear Guides for Medium Load - Stainless Steel - With Plastic Retainers, Interchangeable, Light Preload
These linear guides or linear slides are factory automation components. They offer a wide variety of sizes to choose from.
[Feature]
● Rail Length Minimum/Maximum (mm.): 100 and 1480
● Assembly Height (mm.): 24, 28 and 33
● Rail Type : Standard Rail
● Option: Set (Rail + Block) / Block only or Rail only
● Material: Stainless Steel (SUS440C Equivalent) 57HRC
[Application]
It is used in a variety of machines such as CNC machines, 3D printers, measuring instruments, and so on.- Volume Discount
Days to Ship: 6 Day(s) or more -
Miniature Linear Guides - Wide Rails - Long Blocks with Dowel Holes, Light Preload
MISUMI
Miniature Linear Guides - Wide Rails - Long Blocks with Dowel Holes, Light Preload
These linear guides or linear slides are factory automation components. They offer a wide variety of sizes to choose from.
[Feature]
● Rail Length Minimum/Maximum (mm.): 80 and 670
● Assembly Height (mm.): 9, 12, 14 and 16
● Block Type : Long Block with Dowel Holes
● Rail Type : Wide Rail
● Material: Stainless Steel 56HRC
[Application]
It is used in a variety of machines such as CNC machines, 3D printers, measuring instruments, and so on.Days to Ship: 8 Day(s) -
Miniature Linear Guides - Wide Rails - Wide Standard Blocks, Light Preload / Slight Clearance
MISUMI
Miniature Linear Guides - Wide Rails - Wide Standard Blocks, Light Preload / Slight Clearance
These linear guides or linear slides are factory automation components. They offer a wide variety of sizes to choose from.
[Feature]
● Rail Length Minimum/Maximum (mm.): 50 and 670
● Assembly Height (mm.): 9, 12, 14, and 16
● Rail Type : Wide Rail
● Accuracy Standards: Standard Grade or High Grade
● Material: Stainless Steel 56HRC
[Application]
It is used in a variety of machines such as CNC machines, 3D printers, measuring instruments, and so on.Days to Ship: 8 Day(s) -
Linear Guides for Heavy Load - Dust Resistant - With Double Seals / Metal Scrapers, Normal Clearance
MISUMI
Linear Guides for Heavy Load - Dust Resistant - With Double Seals / Metal Scrapers, Normal Clearance
These linear guides or linear slides are factory automation components. They offer a wide variety of sizes to choose from.
[Feature]
● Rail Length Minimum/Maximum (mm.): 160 and 1960
● Assembly Height (mm.): 24, 28, and 33
● Block Type : Standard Block or Wide Block
● Material: Carbon Steel 58HRC
[Application]
It is used in a variety of machines such as CNC machines, 3D printers, measuring instruments, and so on.Days to Ship: 8 Day(s) -
Linear Guides for Super Heavy Load - Normal Clearance
MISUMI
Linear Guides for Super Heavy Load - Normal Clearance
These linear guides or linear slides are factory automation components. They offer a wide variety of sizes to choose from.
[Feature]
● Rail Length Minimum/Maximum (mm.): 100 and 1960
● Assembly Height (mm.): 24, 28, 30, 36, 40, 42 and 45
● Block Type : Standard Block and Wide Block Tapped Hole
● Material: Carbon Steel 56HRC-62HRC
[Application]
It is used in a variety of machines such as CNC machines, 3D printers, measuring instruments, and so on.Days to Ship: 4 Day(s) -
MISUMI
Linear Guides for Super Heavy Load - Stainless Steel - With Plastic Retainers, Interchangeable, Light Preload
These linear guides or linear slides are factory automation components. They offer a wide variety of sizes to choose from.
[Feature]
● Rail Length Minimum/Maximum (mm.): 220 and 1480
● Assembly Height (mm.): 30 and 40
● Block Type : Standard Block
● Material: Stainless Steel (SUS440C Equivalent) 57HRC
[Application]
It is used in a variety of machines such as CNC machines, 3D printers, measuring instruments, and so on.- Volume Discount
Days to Ship: 6 Day(s) or more -
Linear Guides for for Medium Load - Normal Clearance
MISUMI
Linear Guides for Medium Load - Normal Clearance
These linear guides or linear slides are factory automation components. They offer a wide variety of sizes to choose from.
[Feature]
● Rail Length Minimum/Maximum (mm.): 100 and 1960
● Assembly Height (mm.): 24, 28, 33, and 42
● Block Type : Standard Block and Wide Block Tapped Hole
● Material: Carbon Steel 56HRC-62HRC
[Application]
It is used in a variety of machines such as CNC machines, 3D printers, measuring instruments, and so on.Days to Ship: 4 Day(s) or more -
Full-Ball Type LM Guide Wide Rail HRW Type
THK
A structure with a wide rail width and low center of gravity. HSR It is advantageous when there are Mc moment requirements and is thin compared with.
[Features]
· Circulates the ball row using the end plate that is assembled in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.
· Compact heavy load: A high number of effective balls makes it possible to obtain high rigidity in all directions. Has a wide rail width and can adequately withstand moments with a single shaft.
There is a high rigidity in the horizontal direction and there is no need to for reinforcement such as horizontal pressing due to large secondary moments being incurred on the rail cross-section.
· The self-aligning capability achieved from the unique circular arched-groove front face combination (DF set) makes it possible to absorb the mounting error even when there is a preload incurred, and it is also capable of obtaining a smooth linear motion at a high accuracy.Days to Ship: 7 Day(s) or more -
![[Individual Block Units] Caged Ball LM Guide, International Standard, SHS Type](//my.misumi-ec.com/linked/material/mech/THK1/PHOTO/221000461736_001.jpg?$product_view_b$)
[Individual Block Units] Caged Ball LM Guide, International Standard, SHS Type
THK
An individual block from the THK LM guide SHS series. Extremely useful for sudden design changes and when performing maintenance.
[Features]
· Circulates the ball row using the end plate that is assembled in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.
· Each of the rail rows has been positioned at a 45° contact angle so that the rated load will be the same for all four directions (radial direction, reverse radial direction, horizontal direction) that act on the LM block, which allows it to be used in any position, and is also stable due to incurring a preload with a good balance, and makes it possible to maintain a constant low friction coefficient, and increase rigidity in four directions.
·
· Cross-sectionStandard Price: MYR 439.18- Days to Ship: 4 Day(s) or more -
Linear Guides for Heavy Load - With Plastic Retainers, Interchangeable, Light Preload
MISUMI
Linear Guides for Heavy Load - With Plastic Retainers, Interchangeable, Light Preload
These linear guides or linear slides are factory automation components. They offer a wide variety of sizes to choose from.
[Feature]
● Rail Length Minimum/Maximum (mm.): 100 and 1960
● Assembly Height (mm.): 24, 28, 33 and 42
● Block Type : Standard Block or Wide Block Tapped Hole
● Option: Set (Rail + Block) / Block only
● Material: Carbon Steel 56HRC
[Application]
It is used in a variety of machines such as CNC machines, 3D printers, measuring instruments, and so on.- Volume Discount
Days to Ship: 6 Day(s) or more -
Miniature Full-Ball Type LM Guide SRS-G Type
THK
Lightweight and compact structure.
[Features]
· The LM block is designed to ensure rigidity within a limited space.
· Combining with large diameter balls can provide rigidity in each direction.
· Capable of receiving loads in all directions, and a single-rail guide can adequately operate under a small moment load.
· Despite its compact-size, it is a finite stroke type of cross roller guide and ball slide.
· A highly reliable and compact linear motion system with no problematic cage misalignment.
· LM block, LM rail, and ball are all compatible with stainless steel.Days to Ship: 19 Day(s) or more -
![[Single Rail] Caged Ball LM Guide, International Standard, SHS Type](//my.misumi-ec.com/linked/material/mech/THK1/PHOTO/221000461703_001.jpg?$product_view_b$)
[Single Rail] Caged Ball LM Guide, International Standard, SHS Type
THK
[Single Rail] Caged Ball LM Guide, International Standard, SHS Type
These rails are applicable for THK brand linear guides. They offer a wide variety of sizes to choose from.
[Feature]
● Rail Length (mm.) : The size is configurable between 73 to 2920 mm, and the minimum length can be increased by increments 1 mm.
● Rail Type : Standard
● Rail Mounting Hole Pitch (mm.) : 60 and 80
● Rail Mounting Hole Diameter (mm.) : 4.5, 6, 7 and 9
[Application]
It is used in a THK LM Guide SHS Type- CAD ：
- 2D
Days to Ship: 6 Day(s) or more -
Linear Rail System SBI-FL/FLL Series
SBC
[Features]
· The 4-row, circular arc groove, 2-contact point structural design makes this an international standard series that has a rated load in four directions.
· Integrates the return piece, plate part, and tube, and circulates the balls in a single-file manner.
· Stainless steel holding plates have been assembled on the top and bottom parts of the block to prevent the ball from falling out even if the rail is removed.
* When ordering multiple shaft types, please input a multiple of the number of required shaft types as your order quantity.
(Example) required shaft quantity: 2(-II)⇒ Order quantity: "2, 4, 6..."
Please place your orders in this manner.Days to Ship: 9 Day(s) or more -
Linear Guides for Medium Load - With Plastic Retainers, Interchangeable, Light Preload
MISUMI
Linear Guides for Medium Load - With Plastic Retainers, Interchangeable, Light Preload
These linear guides or linear slides are factory automation components. They offer a wide variety of sizes to choose from.
[Feature]
● Rail Length Minimum/Maximum (mm.): 100 and 1960
● Assembly Height (mm.): 24, 28, 33, and 42
● Rail Type : Standard Rail
● Option: Set (Rail + Block) / Block only or Rail only
● Material: Carbon Steel 58HRC
[Application]
It is used in a variety of machines such as CNC machines, 3D printers, measuring instruments, and so on.- Volume Discount
Days to Ship: 6 Day(s) or more -
Miniature Linear Guides - Dust Resistant - Standard Blocks, Light Preload
MISUMI
Miniature Linear Guides - Dust Resistant - Standard Blocks, Light Preload
These linear guides or linear slides are factory automation components. They offer a wide variety of sizes to choose from.
[Feature]
● Rail Length Minimum/Maximum (mm.): 45 and 700
● Assembly Height (mm.):13, 14, 16 and 20
● Rail Type : Short Rail or Wide Rail
● Material: Stainless Steel 56HRC
[Application]
It is used in a variety of machines such as CNC machines, 3D printers, measuring instruments, and so on.Days to Ship: 8 Day(s) -
Linear Guides Wide Long Blocks-HG Type (ROHS Compliant)
MISUMI
Linear Guides Wide Long Blocks
These linear guides or linear slides are an economy item, The price is cheaper than the MISUMI standard product.They offer a wide variety of sizes to choose from.
[Feature]
● Rail Length Minimum/Maximum (mm.): 160 and 1980(3960)
● Assembly Height (mm.): 30, 36, 48, 60, 70 and 90
● Option: Set (Rail + Block) / Block only
● Material: Carbon Steel 58HRC
[Application]
It is used in a variety of machines such as CNC machines, 3D printers, measuring instruments, and so on.- Volume Discount
- RoHS
Days to Ship: 5 Day(s) or more -
IKO
Aiming for compactness on all sides. A universal type linear motion guiding device that has high versatility.
[Features]
· A universal series that is compact and has high versatility
· Wide variation that responds to needs
· A stainless steel line up with excellent corrosion resistance
· A low noise linear way E that achieves smooth and quiet work- CAD ：
- 2D
Days to Ship: 13 Day(s) or more -
Miniature Linear Guides - Long Blocks with Dowel Holes, Light Preload
MISUMI
Miniature Linear Guides - Long Blocks with Dowel Holes, Light Preload
These linear guides or linear slides are factory automation components. They offer a wide variety of sizes to choose from.
[Feature]
● Rail Length Minimum/Maximum (mm.): 40 and 630
● Assembly Height (mm.): 8, 10, 13, 16 and 20
● Block Type : Long Block with Dowel Holes
● Material: Stainless Steel 56HRC
[Application]
It is used in a variety of machines such as CNC machines, 3D printers, measuring instruments, and so on.Days to Ship: 8 Day(s) -
Miniature Linear Guides - Heat Resistant - Short / Standard / Long Blocks, Light Preload
MISUMI
Miniature Linear Guides - Heat Resistant - Short / Standard / Long Blocks, Light Preload
These linear guides or linear slides are factory automation components. They offer a wide variety of sizes to choose from.
[Feature]
● Rail Length Minimum/Maximum (mm.): 35 and 630
● Assembly Height (mm.): 8, 10, 13 and 16
● Block Type : Standard Block, Short / Long Block
● Material: Stainless Steel 56HRC
[Application]
It is used in a variety of machines such as CNC machines, 3D printers, measuring instruments, and so on.Days to Ship: 8 Day(s) -
Linear Guides for Extra Super Heavy Load - Normal Clearance
MISUMI
Linear Guides for Extra Super Heavy Load - Normal Clearance
These linear guides or linear slides are factory automation components. They offer a wide variety of sizes to choose from.
[Feature]
● Rail Length Minimum/Maximum (mm.): 160 and 1960
● Assembly Height (mm.): 30, 36, 40, 42 and 45
● Block Type : Standard Block and Wide Block Tapped Hole
● Material: Carbon Steel 56HRC-62HRC
[Application]
It is used in a variety of machines such as CNC machines, 3D printers, measuring instruments, and so on.Days to Ship: 4 Day(s) -
![[Short Delivery Size] Caged Ball LM Guide, International Standard, SHS Type](//my.misumi-ec.com/linked/material/mech/THK1/PHOTO/SHS25C.jpg?$product_view_b$)
[Short Delivery Size] Caged Ball LM Guide, International Standard, SHS Type
THK
A best selling THK product. The SHS series can be used in any position.
*When ordering multiple shaft types, input multiples of the number of required shafts as the order quantity.
(Example) required shafts: 2(-II)⇒ Order quantity: "2, 4, 6..."
Required shafts: 3 3(-III)⇒ Order quantity: "3, 6, 9..."
Please place your orders in this manner.Days to Ship: 6 Day(s) or more -
![[Single Rail] Full-Ball Type LM Guide, Radial Type, SR Type](//my.misumi-ec.com/linked/material/mech/THK1/PHOTO/221000476305_001.jpg?$product_view_b$)
[Single Rail] Full-Ball Type LM Guide, Radial Type, SR Type
THK
We have started selling individual rails due to customer requests we have received. The rail length can be designated at units of 1 mm.
[Features]
· Circulates the ball row using the end plate that is assembled in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.
· The ball will not fall out even if the LM block is removed from the LM rail because it is held by a holding plate.
· Has a low cross-section height, and the LM block has been designed with a high rigidity, which allows for highly precise and consistent linear motion.
· A compact type with a low cross-sectional height, which is ideal for horizontal guide parts for ball contact structures that are strong against loads in the radial direction.
· Palm of the two shafts- CAD ：
- 2D
Days to Ship: 6 Day(s) or more -
C-Lube Linear Way L ML (F) Series
IKO
This simple structure which has two rows and four contact points and the unique sizing technology is what led to the creation of this ultra small sized linear guiding device.
[Features]
· If you are looking for a simple structure, then try this ultra small size (smallest sized LWL1 has a truck rail of just 1 mm)
· Wide variation that responds to needs
· A ball retaining type that is easy to assemble
· Made from a stainless steel that is highly corrosion-resistant
· Compatible with a wide variety of application in special environments- CAD ：
- 2D
Days to Ship: 9 Day(s) or more -
IKO
A linear guiding device with high rigidity that includes large diameter steel balls in order to achieve good balance and a high load capacity.
[Features]
· A high rigidity series that has the highest rated load for the ball type
· Wide variation that responds to needs
· A stainless steel line up with excellent corrosion resistance
· A series that has dust-proof specifications that demonstrate excellent dust performance.- CAD ：
- 2D
Days to Ship: 13 Day(s) or more -
Linear Rail System SBI-HL/HLL Series
SBC
[Features]
· The 4-row, circular arc groove, 2-contact point structural design makes this an international standard series that has a rated load in four directions.
· Integrates the return piece, plate part, and tube, and circulates the balls in a single-file manner.
· Stainless steel holding plates have been assembled on the top and bottom parts of the block to prevent the ball from falling out even if the rail is removed.
* When ordering multiple shaft types, please input a multiple of the number of required shaft types as your order quantity.
(Example) required shaft quantity: 2(-II)⇒ Order quantity: "2, 4, 6..."
Please place your orders in this manner.Days to Ship: 9 Day(s) or more -
Linear Guides for Extra Super Heavy Load - With Plastic Retainers, Interchangeable, Light Preload
MISUMI
Linear Guides for Extra Super Heavy Load - With Plastic Retainers, Interchangeable, Light Preload
These linear guides or linear slides are factory automation components. They offer a wide variety of sizes to choose from.
[Feature]
● Rail Length Minimum/Maximum (mm.): 220 and 1960
● Assembly Height (mm.): 30, 36, and 42
● Block Type : Standard Block or Wide Block with Tapped Holes
● Option: Set (Rail + Block) / Block only or Rail only
● Material: Carbon Steel 58HRC
[Application]
It is used in a variety of machines such as CNC machines, 3D printers, measuring instruments, and so on.- Volume Discount
Days to Ship: 8 Day(s) or more -
Full-Ball Type LM Guide for High Temperatures Model HSR-M1
THK
High temperature specifications that can be used in maximum temperatures of 150°C, and the grease can also be used in high temperature environments. Has low rolling resistance fluctuation in response to changes in temperature and a dimension consistency treatment has been applied, which has provided excellent dimensional consistency.
[Features]
· Circulates the ball row using the end plate that is assembled in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.
· Each of the rail rows has been positioned at a 45° contact angle so that the rated load will be the same for all four directions (radial direction, reverse radial direction, horizontal direction) that act on the LM block, which allows it to be used from any position.
· The LM guide for use in high temperatures can be used in even higher temperatures of up to 150°C as a result of using a unique technology for the materials, heat treatment, and lubricant.
· Can now be used in temperatures of up to 150°C by using stainless steel end rails and end rails that utilize rubber materials for use in high temperatures.
· A dimensional consistency treatment has been applied to achieve excellent dimensional consistency after applying heat or cooling (may thermally expand under high temperatures).
· The LM block, LM rail, and balls all use stainless steel with excellent corrosion resistance, which is ideal for use in clean rooms.
· Uses a grease for use in high temperatures with limited rolling resistance fluctuations resulting from grease even when the temperature fluctuates from a normal temperature to a high temperature.- CAD ：
- 2D
Days to Ship: 38 Day(s) or more -
![[Individual Block Units] Full-Ball Type LM Guide, Wide Rail, HRW Model](//my.misumi-ec.com/linked/material/mech/THK1/PHOTO/221000474381_001.jpg?$product_view_b$)
[Individual Block Units] Full-Ball Type LM Guide, Wide Rail, HRW Model
THK
[Individual Block Units] Full-Ball Type LM Guide, Wide Rail, HRW Model
These slide blocks are applicable for THK brand linear guides. They offer a wide variety of sizes to choose from.
[Feature]
● Block Type : Wide Block
● Applicable for Rail Type : Wide Rail
● Accuracy Grade : Standard Grade
● Number of Block Mounting Holes : 4 or 6
● Mounting Hole Dimension : M5, M6 and M8
● Material: Carbon Steel and Stainless Steel
[Application]
It is used in a THK LM Guide HRW Series.Standard Price: MYR 820.96- Days to Ship: 4 Day(s) or more -
Linear Rail System SBI-CL/CLL Series
SBC
[Features]
· The 4-row, circular arc groove, 2-contact point structural design makes this an international standard series that has a rated load in four directions.
· Integrates the return piece, plate part, and tube, and circulates the balls in a single-file manner.
· Stainless steel holding plates have been assembled on the top and bottom parts of the block to prevent the ball from falling out even if the rail is removed.
* When ordering multiple shaft types, please input a multiple of the number of required shaft types as your order quantity.
(Example) required shaft quantity: 2(-II)⇒ Order quantity: "2, 4, 6..."
Please place your orders in this manner.Days to Ship: 9 Day(s) or more -
Full-Ball Type LM Guide, Low Floor Wide Rail HRW Type
THK
Wide rail width and low center of gravity. It has a lower profile than HSR and is suitable for designs that require Mc moment rigidity.
[Features]
・ The balls roll on the 4 rows of rolling surfaces that have been precision ground on the LM rail and LM block, and the end plates incorporated in the LM block circulate the ball rows.
・ Compact heavy load: Since the number of effective balls is large, high rigidity can be obtained in all directions. Has a wide rail width and can adequately withstand moments with a single shaft.
In addition, since the rail has a large second moment of inertia, it has high lateral rigidity and does not require lateral reinforcement, etc.
・ Automatic adjustment ability: The unique front face combination (DF set) of the circular arc groove has the effect of automatic adjustment, which can absorb the mounting error even if a preload is applied, resulting in highly accurate and smooth linear motion.Days to Ship: 6 Day(s) or more -
Miniature Linear Guides - Short Blocks with Dowel Holes, Light Preload
MISUMI
Miniature Linear Guides - Short Blocks with Dowel Holes, Light Preload
These linear guides or linear slides are factory automation components. They offer a wide variety of sizes to choose from.
[Feature]
● Rail Length Minimum/Maximum (mm.): 35 and 630
● Assembly Height (mm.):8, 10, 13 and 16
● Block Type : Short Block with Dowel Holes
● Material: Stainless Steel 56HRC
[Application]
It is used in a variety of machines such as CNC machines, 3D printers, measuring instruments, and so on.Days to Ship: 8 Day(s) -
MISUMI
Linear Guides for Medium Load - Dust Resistant - With Double Seals / Metal Scrapers, Normal Clearance
These linear guides or linear slides are factory automation components. They offer a wide variety of sizes to choose from.
[Feature]
● Rail Length Minimum/Maximum (mm.): 160 and 1960
● Assembly Height (mm.): 24, 28, and 33
● Block Type : Standard and Wide Block
● Material: Carbon Steel 58HRC
[Application]
It is used in a variety of machines such as CNC machines, 3D printers, measuring instruments, and so on.Days to Ship: 8 Day(s) -
[Single Rail] Caged Ball LM Guide, Radial Type, SSR Type
THK
We have started selling individual rails due to customer requests we have received. The rail length can be designated at units of 1 mm.
- CAD ：
- 2D
Days to Ship: 6 Day(s) or more -
![[Single Rail] Full-Ball Type LM Guide, International Standard, HSR Type](//my.misumi-ec.com/linked/material/mech/THK1/PHOTO/221000461714_001.jpg?$product_view_b$)
[Single Rail] Full-Ball Type LM Guide, International Standard, HSR Type
THK
We have started selling individual rails due to customer requests we have received. The rail length can be designated at units of 1 mm.
- CAD ：
- 2D
Days to Ship: 6 Day(s) or more -
![[Individual Block Units] Caged Ball LM Guide, Wide Rail SHW Type](//my.misumi-ec.com/linked/material/mech/THK1/PHOTO/221000474369_001.jpg?$product_view_b$)
[Individual Block Units] Caged Ball LM Guide, Wide Rail SHW Type
THK
[Individual Block Units] Caged Ball LM Guide, Wide Rail SHW Type
These slide blocks are applicable for THK brand linear guides. They offer a wide variety of sizes to choose from.
[Feature]
● Block Type : Wide Block
● Applicable for Rail Type : Wide Rail
● Accuracy Grade : Standard Grade
● Number of Block Mounting Holes : 4 or 6
● Mounting Hole Dimension : M4, M5, M6 and M8
● Material: Carbon Steel
[Application]
It is used in a THK LM Guide SHW Series.Standard Price: MYR 991.58- Days to Ship: 4 Day(s) or more -
![[Rail only]Ball retainer with LM Guide Wide rail SHW form](//my.misumi-ec.com/linked/material/mech/THK1/PHOTO/221000476316_001.jpg?$product_view_b$)
[Rail only]Ball retainer with LM Guide Wide rail SHW form
THK
We have started selling individual rails due to customer requests we have received. The rail length can be designated at units of 1 mm.
Days to Ship: 6 Day(s) or more -
IKO
Aiming for compactness on all sides. A universal type linear motion guiding device that has high versatility.
[Features]
· A universal series that is compact and has high versatility
· Wide variation that responds to needs
· A stainless steel line up with excellent corrosion resistance
· A low noise linear way E that achieves smooth and quiet work- CAD ：
- 2D
Days to Ship: 9 Day(s) or more -
Caged Ball LM Guide Low Floor Wide Rail SHW Type
THK
A structure with a wide rail and low center of gravity. Thinner than the SHS type, which is advantageous when Mc moment rigidity is required.
[Features]
· A highly rigid LM guide with superior high speed performance and that is maintenance-free over long periods of time. Also generates little noise thanks to the adoption of a ball retainer.
· The SHW, which has a structure with a wide LM rail and a low center of gravity, is ideal for use in locations where there are space limitations or when there are MC moment rigidity requirements.
· Each of the ball raceways have been positioned at a 45° contact angle so that the rated load will be the same in all 4 directions (radial direction, reverse radial direction, horizontal directions) that act on the LM block, allowing it to be used from any position and in a broad range of applications.
· The self-aligning capability achieved from the manufacturer's proprietary circular arched-groove front face assembly (DF set) makes it possible to absorb any mounting error, even when there is a preload. It also delivers a smooth linear motion at high accuracies.
· The ball retainers eliminate friction generated by the balls rubbing against each other, while the lubricant oil (agent) is maintained, providing superior low-dust performance.Days to Ship: 7 Day(s) or more -
[Short Delivery Size] Caged Ball LM Guide, Radial Type, SSR Type
THK
A best selling THK product. The SSR series is designed for spaces which require rigidity in the radial direction.
*When ordering multiple shaft types, input multiples of the number of required shafts as the order quantity.
(Example) required shafts: 2(-II)⇒ Order quantity: "2, 4, 6..."
Required shafts: 3 3(-III)⇒ Order quantity: "3, 6, 9..."
Please place your orders in this manner.Days to Ship: 7 Day(s) or more -
![[Single Rail] Full-Ball Type LM Guide, Wide Rail, HRW Type](//my.misumi-ec.com/linked/material/mech/THK1/PHOTO/221000476293_001.jpg?$product_view_b$)
[Single Rail] Full-Ball Type LM Guide, Wide Rail, HRW Type
THK
Started selling rails separately, in response to requests. The rail length can be designated at units of 1 mm.
[Features]
· LM rails and LM blocks feature 4 precision-ground raceways that the balls travel along. The end plates embedded in the ball retainer and LM block circulate the rows of balls.Days to Ship: 6 Day(s) or more
![[Individual Block Units] Full-Ball Type LM Guide, Radial, SR Type](http://my.misumi-ec.com/linked/material/mech/THK1/PHOTO/221000474370_001.jpg?$product_view_b$)
![[Individual Block Units] Caged Ball LM Guide, International Standard, SHS Type](http://my.misumi-ec.com/linked/material/mech/THK1/PHOTO/221000461736_001.jpg?$product_view_b$)
![[Single Rail] Caged Ball LM Guide, International Standard, SHS Type](http://my.misumi-ec.com/linked/material/mech/THK1/PHOTO/221000461703_001.jpg?$product_view_b$)
![[Short Delivery Size] Caged Ball LM Guide, International Standard, SHS Type](http://my.misumi-ec.com/linked/material/mech/THK1/PHOTO/SHS25C.jpg?$product_view_b$)
![[Single Rail] Full-Ball Type LM Guide, Radial Type, SR Type](http://my.misumi-ec.com/linked/material/mech/THK1/PHOTO/221000476305_001.jpg?$product_view_b$)
![[Individual Block Units] Full-Ball Type LM Guide, Wide Rail, HRW Model](http://my.misumi-ec.com/linked/material/mech/THK1/PHOTO/221000474381_001.jpg?$product_view_b$)
![[Single Rail] Full-Ball Type LM Guide, International Standard, HSR Type](http://my.misumi-ec.com/linked/material/mech/THK1/PHOTO/221000461714_001.jpg?$product_view_b$)
![[Individual Block Units] Caged Ball LM Guide, Wide Rail SHW Type](http://my.misumi-ec.com/linked/material/mech/THK1/PHOTO/221000474369_001.jpg?$product_view_b$)
![[Rail only]Ball retainer with LM Guide Wide rail SHW form](http://my.misumi-ec.com/linked/material/mech/THK1/PHOTO/221000476316_001.jpg?$product_view_b$)
![[Single Rail] Full-Ball Type LM Guide, Wide Rail, HRW Type](http://my.misumi-ec.com/linked/material/mech/THK1/PHOTO/221000476293_001.jpg?$product_view_b$)
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Specifications |
| Rail Length L(mm) |
| Block Type(mm) |
| Rail Width(mm) |
| Mounting Height H(mm) |
| Nominal Part Number |
| Rail Type |
| Set / Single Item |
| Preload(N・m) |
| Accuracy(N・m) |
| Material |
| Ball Arrangement |
| No. of Blocks(mm) |
| Retainer |
| Block Mounting Hole Pitch (Width Direction)(mm) |
| Block Mounting Hole Pitch (Length Direction)(mm) |
| Block Mounting Hole Diameter |
| Rail Mounting Hole Pitch(mm) |
| Rail Mounting Hole Diameter |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | THK | OZAK | MISUMI | THK | OZAK | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | THK | THK | MISUMI | THK | THK | SBC | MISUMI | MISUMI | MISUMI | IKO | MISUMI | MISUMI | MISUMI | THK | THK | IKO | IKO | SBC | MISUMI | THK | THK | SBC | THK | MISUMI | MISUMI | THK | THK | THK | THK | IKO | THK | THK | THK |
| Product Series | [Individual Block Units] Full-Ball Type LM Guide, Radial, SR Type | Linear Guides for Medium/Heavy Load - With Dowel Holes, Normal Clearance | Miniature Linear Guides - Wide Rails - Long Blocks with Dowel Holes, Light Preload | Miniature Linear Guides - Wide Rails - Wide Standard Blocks, Light Preload / Slight Clearance | Linear Guides for Heavy Load - Dust Resistant - With Double Seals / Metal Scrapers, Normal Clearance | [Individual Block Units] Caged Ball LM Guide, International Standard, SHS Type | Linear Guides for Heavy Load - With Plastic Retainers, Interchangeable, Light Preload | [Single Rail] Caged Ball LM Guide, International Standard, SHS Type | Linear Guides for Medium Load - With Plastic Retainers, Interchangeable, Light Preload | Miniature Linear Guides - Dust Resistant - Standard Blocks, Light Preload | Miniature Linear Guides - Long Blocks with Dowel Holes, Light Preload | Miniature Linear Guides - Heat Resistant - Short / Standard / Long Blocks, Light Preload | [Short Delivery Size] Caged Ball LM Guide, International Standard, SHS Type | Linear Guides for Extra Super Heavy Load - With Plastic Retainers, Interchangeable, Light Preload | [Individual Block Units] Full-Ball Type LM Guide, Wide Rail, HRW Model | Miniature Linear Guides - Short Blocks with Dowel Holes, Light Preload | [Single Rail] Full-Ball Type LM Guide, International Standard, HSR Type | [Individual Block Units] Caged Ball LM Guide, Wide Rail SHW Type | [Short Delivery Size] Caged Ball LM Guide, Radial Type, SSR Type | ||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Days to Ship | 4 Day(s) or more | 14 Day(s) or more | 8 Day(s) | 38 Day(s) or more | 21 Day(s) or more | 6 Day(s) or more | 8 Day(s) | 8 Day(s) | 8 Day(s) | 4 Day(s) | 6 Day(s) or more | 4 Day(s) or more | 7 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 19 Day(s) or more | 6 Day(s) or more | 9 Day(s) or more | 6 Day(s) or more | 8 Day(s) | 5 Day(s) or more | 13 Day(s) or more | 8 Day(s) | 8 Day(s) | 4 Day(s) | 6 Day(s) or more | 6 Day(s) or more | 9 Day(s) or more | 13 Day(s) or more | 9 Day(s) or more | 8 Day(s) or more | 38 Day(s) or more | 4 Day(s) or more | 9 Day(s) or more | 6 Day(s) or more | 8 Day(s) | 8 Day(s) | 6 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 9 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 6 Day(s) or more |
| Specifications |
| ||||||||||||||||||||||||||||||||||||||||||||
| Rail Length L(mm) | - | 25 ～ 1000 | 100 ～ 1960 | 47 ～ 3000 | 160 ～ 4000 | 100 ～ 1480 | 80 ～ 989 | 50 ～ 989 | 160 ～ 1960 | 110 ～ 1960 | 220 ～ 1480 | 100 ～ 1960 | 38 ～ 3000 | - | 100 ～ 1960 | 32 ～ 2000 | 73 ～ 2920 | 71 ～ 2900 | 100 ～ 1960 | 45 ～ 989 | 160 ～ 2799 | 46 ～ 3000 | 40 ～ 989 | 35 ～ 989 | 170 ～ 1960 | 73 ～ 3000 | 73 ～ 3000 | 20 ～ 1000 | 70 ～ 3000 | 71 ～ 2900 | 220 ～ 1960 | 67 ～ 1500 | - | 92 ～ 2900 | - | 35 ～ 989 | 160 ～ 1960 | 73 ～ 2920 | 73 ～ 2920 | - | 60 ～ 3000 | 46 ～ 3000 | 38 ～ 3000 | 1481 ～ 3000 | 64 ～ 3000 |
| Block Type(mm) | Standard / Wide | Standard / Long | Standard | Standard / Short / Wide | Standard / Long | Standard | Long | Wide | Standard / Wide | Standard / Wide | Standard | Standard / Wide | Wide | Standard / Wide | Standard / Wide | Standard / Wide | - | Wide / Wide Long | Standard / Wide | Standard | Wide Long | - | Long | Standard / Short / Long | Standard / Wide | Standard / Wide | - | - | - | Standard / Long | Standard / Wide | Standard | Wide | Standard / Long | Wide | Short | Standard / Wide | - | - | Wide | - | - | Wide | Standard / Wide | - |
| Rail Width(mm) | - | 5 ～ 15 | 15 ～ 23 | 15 ～ 34 | 15 ～ 45 | 15 ～ 23 | 14 ～ 42 | 14 ～ 42 | 15 ～ 23 | 15 ～ 28 | 20 ～ 23 | 15 ～ 28 | 18 ～ 120 | - | 15 ～ 28 | 9 ～ 42 | 15 ～ 34 | 15 ～ 45 | 15 ～ 28 | 12 ～ 42 | 20 ～ 63 | - | 7 ～ 20 | 7 ～ 15 | 20 ～ 28 | 15 ～ 34 | 15 ～ 34 | - | - | 15 ～ 45 | 20 ～ 28 | 15 ～ 28 | - | 20 ～ 23 | 18 ～ 69 | 7 ～ 15 | 15 ～ 23 | 15 ～ 34 | 15 ～ 34 | - | 37 ～ 69 | - | 18 ～ 90 | 15 ～ 34 | 33 ～ 69 |
| Mounting Height H(mm) | - | 6 ～ 16 | 24 ～ 33 | 24 ～ 48 | 28 ～ 70 | 24 ～ 33 | 9 ～ 16 | 9 ～ 16 | 24 ～ 33 | 24 ～ 45 | 30 ～ 40 | 24 ～ 42 | 12 ～ 60 | - | 24 ～ 42 | 10 ～ 25 | 24 ～ 48 | 24 ～ 60 | 24 ～ 42 | 13 ～ 20 | 30 ～ 90 | - | 8 ～ 20 | 8 ～ 16 | 30 ～ 45 | 24 ～ 55 | 24 ～ 48 | - | - | 24 ～ 60 | 30 ～ 42 | 28 ～ 45 | - | 28 ～ 33 | 12 ～ 35 | 8 ～ 16 | 24 ～ 33 | 24 ～ 48 | 15 ～ 48 | - | 21 ～ 35 | - | 12 ～ 50 | 24 ～ 48 | 17 ～ 35 |
| Nominal Part Number | 15 ～ 35 | 5 ～ 15 | 15 ～ 25 | 15 ～ 35 | 15 ～ 45 | - | 7W ～ 15W | 7W ～ 15W | 15 ～ 25 | 15 ～ 30 | 20 ～ 30 | 15 ～ 30 | 12 ～ 60 | 15 ～ 35 | 15 ～ 30 | 9W ～ 25 | 15 ～ 35 | 15 ～ 45 | 15 ～ 30 | 12W ～ 20W | 20 ～ 65 | - | 7 ～ 20 | 7 ～ 15 | 20 ～ 30 | 15 ～ 35 | 15 ～ 35 | - | - | 15 ～ 45 | 20 ～ 30 | 15 ～ 30 | 17 ～ 35 | 20 ～ 25 | 12 ～ 35 | 7 ～ 15 | 15 ～ 25 | 15 ～ 35 | 15 ～ 35 | 21 ～ 35 | 21 ～ 35 | - | 12 ～ 50 | 15 ～ 35 | HRW17 ～ HRW35 |
| Rail Type | Standard | Standard | Standard | Standard | Standard | Standard | Wide | Wide | Standard | Standard | Standard | Standard | Wide | Standard | Standard | Standard / Wide | Standard | Standard | Standard | Standard / Wide | Standard | - | Standard | Standard | Standard | Standard | Standard | - | - | Standard | Standard | Standard | Wide | Standard | Wide | Standard | Standard | Standard | Standard | Wide | Wide | - | Wide | Standard | Wide |
| Set / Single Item | Block Only | Set | Set | Set | Set | Set / Block Only / Rail Only | Set | Set | Set | Set | Set / Block Only / Rail Only | Set | Set | Block Only | Set / Block Only / Rail Only | Set | Rail Only | Set | Set / Block Only / Rail Only | Set | Set / Block Only | - | Set | Set | Set | Set | Rail Only | - | - | Set | Set / Block Only / Rail Only | Set | Block Only | Set | Set | Set | Set | Rail Only | Rail Only | Block Only | Rail Only | - | Set | Set | Rail Only |
| Preload(N・m) | Standard | - | Clearance | Standard / Light Preload | - | Light Preload | Light Preload | Light Preload / Clearance | Clearance | Clearance | Light Preload | Clearance | Standard / Light Preload / Medium Preload | Standard | Light Preload | Standard / Light Preload | Standard | Standard / Light Preload / Heavy Preload | Light Preload | Light Preload | Clearance | Standard | Light Preload | Light Preload | Clearance | Standard | Standard | Standard | Standard | Standard / Light Preload / Heavy Preload | Light Preload | Standard / Light Preload / Medium Preload | Standard | Standard / Light Preload / Heavy Preload | - | Light Preload | Clearance | Standard | Standard | Standard | Standard | Standard | Standard / Light Preload / Medium Preload | Standard | Standard |
| Accuracy(N・m) | Standard Grade | Standard Grade | Standard Grade | Standard Grade / High Grade / Precision Grade / High Precision Grade / Ultra Precision Grade | Standard Grade | - | High Grade | Standard Grade / High Grade | Standard Grade | Standard Grade | - | Standard Grade | Standard Grade / High Grade / Precision Grade / High Precision Grade / Ultra Precision Grade | Standard Grade | - | Standard Grade / High Grade / Precision Grade | Standard Grade | Standard Grade | - | High Grade | Standard Grade | - | High Grade | High Grade | Standard Grade | Standard Grade | Standard Grade | High Grade | High Grade | Standard Grade | - | Standard Grade / High Grade / Precision Grade / High Precision Grade / Ultra Precision Grade | Standard Grade | Standard Grade | - | High Grade | Standard Grade | Standard Grade | Standard Grade | Standard Grade | Standard Grade | - | Standard Grade / High Grade / Precision Grade / High Precision Grade / Ultra Precision Grade | Standard Grade | Standard Grade |
| Material | Carbon Steel / Stainless Steel | Stainless Steel | Carbon Steel | Carbon Steel / Stainless Steel | Carbon Steel | Stainless Steel | Stainless Steel | Stainless Steel | Carbon Steel | Carbon Steel | Stainless Steel | Carbon Steel | Carbon Steel / Stainless Steel | Carbon Steel | Carbon Steel | Stainless Steel | Carbon Steel | Carbon Steel | Carbon Steel | Stainless Steel | Carbon Steel | Carbon Steel | Stainless Steel | Stainless Steel | Carbon Steel | Carbon Steel | Carbon Steel / Stainless Steel | Stainless Steel | Carbon Steel | Carbon Steel | Carbon Steel | Stainless Steel | Carbon Steel / Stainless Steel | Carbon Steel | Carbon Steel / Stainless Steel | Stainless Steel | Carbon Steel | Carbon Steel / Stainless Steel | Carbon Steel / Stainless Steel | Carbon Steel | Carbon Steel | Carbon Steel | Carbon Steel / Stainless Steel | Carbon Steel | Carbon Steel / Stainless Steel |
| Ball Arrangement | 4-Row, Circular | Standard | 4-Row, Circular | 4-Row, Circular | Standard | 4-Row, Gothic | Standard | Standard | 4-Row, Circular | 4-Row, Circular | 4-Row, Gothic | 4-Row, Circular | 4-Row, Circular | 4-Row, Circular | 4-Row, Gothic | Standard | - | 4-Row, Circular | 4-Row, Gothic | Standard | 4-Row, Circular | - | Standard | Standard | 4-Row, Circular | 4-Row, Circular | - | - | - | 4-Row, Circular | 4-Row, Gothic | 4-Row, Circular | 4-Row, Circular | 4-Row, Circular | 4-Row, Circular | Standard | 4-Row, Circular | - | - | 4-Row, Circular | - | - | 4-Row, Circular | 4-Row, Circular | - |
| No. of Blocks(mm) | 1 | 1 ～ 9 | 1 ～ 2 | 1 ～ 9 | 1 ～ 9 | 1 ～ 2 | 1 ～ 2 | 1 ～ 2 | 1 ～ 2 | 1 ～ 2 | 1 ～ 2 | 1 ～ 2 | 1 ～ 9 | 1 | 1 ～ 2 | 1 ～ 9 | - | 1 ～ 4 | 1 ～ 2 | 1 ～ 2 | 1 | 1 ～ 9 | 1 ～ 2 | 1 ～ 2 | 1 ～ 2 | 1 ～ 9 | - | 1 ～ 9 | 1 ～ 9 | 1 ～ 4 | 1 ～ 2 | 1 ～ 9 | 1 | 1 ～ 4 | - | 1 ～ 2 | 1 ～ 2 | - | - | 1 | - | 1 ～ 9 | 1 ～ 9 | 1 ～ 9 | - |
| Retainer | N/A | N/A | N/A | Available | N/A | Available | N/A | N/A | N/A | N/A | Available | N/A | N/A | Available | Available | N/A | - | - | Available | N/A | N/A | - | N/A | N/A | N/A | Available | - | - | - | - | Available | N/A | N/A | - | N/A | N/A | N/A | - | - | Available | - | - | Available | Available | - |
| Block Mounting Hole Pitch (Width Direction)(mm) | 26 ～ 82 | - | - | 26 ～ 60 | - | - | - | - | - | - | - | - | 21 ～ 180 | 26 ～ 72 | - | 15 ～ 45 | - | - | - | - | - | - | - | - | - | 26 ～ 82 | - | - | - | - | - | 11.5 ～ 40 | 29 ～ 107 | - | 21 ～ 107 | - | - | - | - | 31 ～ 107 | - | - | 21 ～ 144 | - | - |
| Block Mounting Hole Pitch (Length Direction)(mm) | 26 ～ 50 | - | - | 26 ～ 50 | - | - | - | - | - | - | - | - | 12 ～ 80 | 26 ～ 72 | - | 10 ～ 35 | - | - | - | - | - | - | - | - | - | 26 ～ 72 | - | - | - | - | - | 18 ～ 60 | 15 ～ 60 | - | 12 ～ 60 | - | - | - | - | 19 ～ 60 | - | - | 12 ～ 80 | - | - |
| Block Mounting Hole Diameter | 4 ～ 9 | - | - | 4 ～ 8 | - | - | - | - | - | - | - | - | 3 ～ 10.5 | 4 ～ 8.5 | - | 3 ～ 6 | - | - | - | - | - | - | - | - | - | 4 ～ 8.5 | - | - | - | - | - | 4 ～ 8 | 3.3 ～ 8 | - | 3 ～ 8 | - | - | - | - | 4.4 ～ 8 | - | - | 2.5 ～ 10 | - | - |
| Rail Mounting Hole Pitch(mm) | 60 ～ 80 | - | - | 60 ～ 80 | - | - | - | - | - | - | - | - | 40 ～ 105 | 60 ～ 80 | - | 20 ～ 60 | 60 ～ 80 | - | - | - | 60 ～ 150 | - | - | - | - | 60 ～ 80 | 60 ～ 80 | - | - | - | - | 60 ～ 80 | 40 ～ 80 | - | 40 ～ 80 | - | - | 60 ～ 80 | 60 ～ 80 | 50 ～ 80 | 50 ～ 80 | - | 40 ～ 80 | - | 40 ～ 80 |
| Rail Mounting Hole Diameter | 3.5 ～ 9 | - | - | 4.5 ～ 9 | - | - | - | - | - | - | - | - | 4.5 ～ 11 | 4.5 ～ 9 | - | 3.5 ～ 7 | 4.5 ～ 9 | - | - | - | - | - | - | - | - | 4.5 ～ 9 | 3.5 ～ 9 | - | - | - | - | 4.5 ～ 9 | 4.5 ～ 7 | - | 4.5 ～ 7 | - | - | 4.5 ～ 9 | 4.5 ～ 9 | 4.5 ～ 7 | 4.5 ～ 7 | - | 4.5 ～ 9 | - | 4.5 ～ 7 |
![[Individual Block Units] Full-Ball Type LM Guide, Radial, SR Type](http://my.misumi-ec.com/linked/material/mech/THK1/PHOTO/221000474370_001.jpg?$product_view_c$)
![[Individual Block Units] Caged Ball LM Guide, International Standard, SHS Type](http://my.misumi-ec.com/linked/material/mech/THK1/PHOTO/221000461736_001.jpg?$product_view_c$)
![[Single Rail] Caged Ball LM Guide, International Standard, SHS Type](http://my.misumi-ec.com/linked/material/mech/THK1/PHOTO/221000461703_001.jpg?$product_view_c$)
![[Short Delivery Size] Caged Ball LM Guide, International Standard, SHS Type](http://my.misumi-ec.com/linked/material/mech/THK1/PHOTO/SHS25C.jpg?$product_view_c$)
![[Single Rail] Full-Ball Type LM Guide, Radial Type, SR Type](http://my.misumi-ec.com/linked/material/mech/THK1/PHOTO/221000476305_001.jpg?$product_view_c$)
![[Individual Block Units] Full-Ball Type LM Guide, Wide Rail, HRW Model](http://my.misumi-ec.com/linked/material/mech/THK1/PHOTO/221000474381_001.jpg?$product_view_c$)
![[Single Rail] Full-Ball Type LM Guide, International Standard, HSR Type](http://my.misumi-ec.com/linked/material/mech/THK1/PHOTO/221000461714_001.jpg?$product_view_c$)
![[Individual Block Units] Caged Ball LM Guide, Wide Rail SHW Type](http://my.misumi-ec.com/linked/material/mech/THK1/PHOTO/221000474369_001.jpg?$product_view_c$)
![[Rail only]Ball retainer with LM Guide Wide rail SHW form](http://my.misumi-ec.com/linked/material/mech/THK1/PHOTO/221000476316_001.jpg?$product_view_c$)
![[Single Rail] Full-Ball Type LM Guide, Wide Rail, HRW Type](http://my.misumi-ec.com/linked/material/mech/THK1/PHOTO/221000476293_001.jpg?$product_view_c$)
Loading...
Configure
Specification/Dimensions
-
Rail Length L(mm)
- 25
- 35
- 39
- 40
- 45
- 50
- 55
- 70
- 75
- 80
- 85
- 95
- 100
- 110
- 115
- 120
- 130
- 135
- 140
- 145
- 150
- 155
- 160
- 170
- 175
- 190
- 195
- 200
- 205
- 215
- 220
- 230
- 235
- 245
- 250
- 255
- 260
- 265
- 270
- 275
- 280
- 290
- 295
- 310
- 315
- 320
- 335
- 340
- 345
- 350
- 355
- 360
- 370
- 375
- 390
- 395
- 400
- 415
- 420
- 430
- 435
- 440
- 445
- 455
- 460
- 470
- 475
- 495
- 510
- 515
- 520
- 535
- 545
- 550
- 555
- 570
- 575
- 580
- 590
- 595
- 600
- 615
- 620
- 630
- 635
- 640
- 645
- 670
- 680
- 695
- 700
- 710
- 720
- 745
- 750
- 760
- 770
- 790
- 795
- 820
- 830
- 840
- 845
- 870
- 880
- 895
- 910
- 920
- 940
- 945
- 950
- 970
- 990
- 1000
- 1060
- 1080
- 1120
- 1160
- 1180
- 1240
- 1300
- 1320
- 1360
- 1400
- 1420
- 1480
- 1540
- 1560
- 1600
- 1640
- 1660
- 1720
- 1780
- 1800
- 1840
- 1880
- 1900
- 1960
[110-1950/10mm Unit(s)][17-4000/1mm Unit(s)]
-
Block Type(mm)
-
Standard -
-
-
-
-
-
-
-
Rail Width(mm)
-
Mounting Height H(mm)
-
Nominal Part Number
-
Rail Type
-
Standard -
-
-
Set / Single Item
-
Preload(N・m)
See the accuracy standard of each manufacturer.
-
Accuracy(N・m)
See the accuracy standard of each manufacturer.
-
Material
-
Ball Arrangement
-
No. of Blocks(mm)
-
Retainer
-
Block Mounting Hole Pitch (Width Direction)(mm)
-
Block Mounting Hole Pitch (Length Direction)(mm)
-
Block Mounting Hole Diameter
-
Rail Mounting Hole Pitch(mm)
-
Rail Mounting Hole Diameter
CAD
-
- 2D
- 3D
Related Categories to Standard Linear Guides
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy