(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Standard Linear Guides（Page3）
| Days to Ship |
|
|---|
-
IKO
A linear guiding device with high rigidity that includes large diameter steel balls in order to achieve good balance and a high load capacity.
[Features]
· A high rigidity series that has the highest rated load for the ball type
· Wide variation that responds to needs
· A stainless steel line up with excellent corrosion resistance
· A series that has dust-proof specifications that demonstrate excellent dust performance.- CAD ：
- 2D
Days to Ship: 13 Day(s) or more -
Wide Miniature Eco Guide (EGM-W, EGM-WL Series)
OZAK
[Features]
・ Since all parts are composed of stainless steel and plastic, it is ideal under operating environments where rust should be avoided
・ The minimum allowable compact design and weight reduction have been designed, making it ideal for high-speed operation
・ The ball rolling surface is designed in a gothic arch shape that can receive high load capacity, so it maintains a long lifespan
・ Lubrication holes are provided on both sides of the bearing carriage to simplify maintenance. It is recommended to supply grease regularly- CAD ：
- 2D
Days to Ship: 14 Day(s) or more -
OZAK
[Features]
・ A side seal is provided as standard to enhance dust-proofness. Longer lifespan can be expected because foreign objects are further prevented from entering
・ The weight of the rail has been reduced by reviewing the height and cross-sectional shape
・ The lubrication performance has been improved compared to conventional products by reviewing the grease supply path and installing a grease reservoir in the ball circulation path
・ Since the bearing and rail have complete compatibility, there is no need to put a matching mark between the bearing, rail, etc., and assembly time can be shortened
・ The ball built into the bearing has a structure that does not fall out, so there is no risk of the ball falling out, but when assembling the bearing into the rail, insert it slowly in parallel
・ The rail length is standardized so that it can be used for all rail lengths and that the mounting hole pitch positions are symmetrical
・ The bearing is shipped with lithium soap-based grease sealed, but the manufacturer recommends that you regularly replenish the grease because there are lubrication holes on both sides- CAD ：
- 2D
Days to Ship: 21 Day(s) or more -
Compact S Type Economy Guide (EGS-S)
OZAK
[Features]
・ A side seal is provided as standard to enhance dust-proofness. Longer lifespan can be expected because foreign objects are further prevented from entering
・ The weight of the rail has been reduced by reviewing the height and cross-sectional shape
・ The lubrication performance has been improved compared to conventional products by reviewing the grease supply path and installing a grease reservoir in the ball circulation path
・ Since the bearing and rail have complete compatibility, there is no need to put a matching mark between the bearing, rail, etc., and assembly time can be shortened
・ The ball built into the bearing has a structure that does not fall out, so there is no risk of the ball falling out, but when assembling the bearing into the rail, insert it slowly in parallel
・ The rail length is standardized so that it can be used for all rail lengths and that the mounting hole pitch positions are symmetrical
・ The bearing is shipped with lithium soap-based grease sealed, but the manufacturer recommends that you regularly replenish the grease because there are lubrication holes on both sides- CAD ：
- 2D
Days to Ship: 12 Day(s) or more -
H Type Economy Guide With Flange (EGH-F, EGH-FL)
OZAK
[Features]
・ A side seal is provided as standard to enhance dust-proofness. Longer lifespan can be expected because foreign objects are further prevented from entering
・ The weight of the rail has been reduced by reviewing the height and cross-sectional shape
・ The lubrication performance has been improved compared to conventional products by reviewing the grease supply path and installing a grease reservoir in the ball circulation path
・ Since the bearing and rail have complete compatibility, there is no need to put a matching mark between the bearing, rail, etc., and assembly time can be shortened
・ The ball built into the bearing has a structure that does not fall out, so there is no risk of the ball falling out, but when assembling the bearing into the rail, insert it slowly in parallel
・ The rail length is standardized so that it can be used for all rail lengths and that the mounting hole pitch positions are symmetrical
・ The bearing is shipped with lithium soap-based grease sealed, but the manufacturer recommends that you regularly replenish the grease because there are lubrication holes on both sides- CAD ：
- 2D
Days to Ship: 21 Day(s) or more -
Linear Rail System SBI-SL/SLL Series
SBC
[Features]
· The 4-row, circular arc groove, 2-contact point structural design makes this an international standard series that has a rated load in four directions.
· Integrates the return piece, plate part, and tube, and circulates the balls in a single-file manner.
· Stainless steel holding plates have been assembled on the top and bottom parts of the block to prevent the ball from falling out even if the rail is removed.
* When ordering multiple shaft types, please input a multiple of the number of required shaft types as your order quantity.
(Example) required shaft quantity: 2(-II)⇒ Order quantity: "2, 4, 6..."
Please place your orders in this manner.Days to Ship: 9 Day(s) or more -
Linear Rail System SBI-FV Series
SBC
[Features]
· The 4-row, circular arc groove, 2-contact point structural design makes this an international standard series that has a rated load in four directions.
· Integrates the return piece, plate part, and tube, and circulates the balls in a single-file manner.
· Stainless steel holding plates have been assembled on the top and bottom parts of the block to prevent the ball from falling out even if the rail is removed.
* When ordering multiple shaft types, please input a multiple of the number of required shaft types as your order quantity.
(Example) required shaft quantity: 2(-II)⇒ Order quantity: "2, 4, 6..."
Please place your orders in this manner.Days to Ship: 9 Day(s) or more -
Linear Rail System SBI-SV Series
SBC
[Features]
· The 4-row, circular arc groove, 2-contact point structural design makes this an international standard series that has a rated load in four directions.
· Integrates the return piece, plate part, and tube, and circulates the balls in a single-file manner.
· Stainless steel holding plates have been assembled on the top and bottom parts of the block to prevent the ball from falling out even if the rail is removed.
* When ordering multiple shaft types, please input a multiple of the number of required shaft types as your order quantity.
(Example) required shaft quantity: 2(-II)⇒ Order quantity: "2, 4, 6..."
Please place your orders in this manner.Days to Ship: 13 Day(s) or more -
Caged Ball LM Guide, Low Floor Wide Rail SHW Type
THK
Wide rail width and low center of gravity. It has a lower profile than SHS and is suitable for designs that require Mc moment rigidity.
[Features]
・ A wide-type, high-rigidity LM guide that uses a ball retainer to enable low noise, long-term maintenance-free operation, and excellent high-speed performance.
・ The SHW type with a low center of gravity and a wide LM rail width is ideal for places where space saving is required and Mc moment rigidity is required.
・ Since each ball row is arranged with a contact angle of 45° so that the load rating is the same in the 4 directions (radial direction, reverse radial direction, lateral direction) acting on the LM block, it can be used in any position. It can be used for a wide range of purposes.
・ The unique front face combination (DF set) of the circular arc groove enables the automatic adjustment capability to absorb the mounting error even if a preload is applied, resulting in a highly accurate and smooth linear motion.
・ The ball retainer eliminates mutual friction between balls and retains lubricant oil (agent) so that dust is unlikely to occur.Days to Ship: 6 Day(s) or more
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Rail Length L(mm) |
| Block Type(mm) |
| Rail Width(mm) |
| Mounting Height H(mm) |
| Nominal Part Number |
| Rail Type |
| Set / Single Item |
| Preload(N・m) |
| Accuracy(N・m) |
| Material |
| Ball Arrangement |
| No. of Blocks(mm) |
| Retainer |
| Block Mounting Hole Pitch (Width Direction)(mm) |
| Block Mounting Hole Pitch (Length Direction)(mm) |
| Block Mounting Hole Diameter |
| Rail Mounting Hole Pitch(mm) |
| Rail Mounting Hole Diameter |
|
|
|
|
|
|
|
|
| |
| Brand | IKO | OZAK | OZAK | OZAK | OZAK | SBC | SBC | SBC | THK |
| Product Series | |||||||||
| CAD |
|
|
|
|
|
|
|
|
|
| Days to Ship | 13 Day(s) or more | 14 Day(s) or more | 21 Day(s) or more | 12 Day(s) or more | 21 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 13 Day(s) or more | 6 Day(s) or more |
| Rail Length L(mm) | 70 ～ 3000 | 50 ～ 1000 | 100 ～ 4000 | 100 ～ 4000 | 160 ～ 4000 | 71 ～ 2900 | 47 ～ 2900 | 47 ～ 4000 | 53 ～ 3000 |
| Block Type(mm) | - | Wide / Wide Long | Standard | Short | Standard / Long | Standard / Long | Wide | Standard | Wide |
| Rail Width(mm) | - | 10 ～ 42 | 15 ～ 28 | 15 ～ 28 | 15 ～ 45 | 15 ～ 45 | 15 ～ 23 | 15 ～ 23 | 18 ～ 69 |
| Mounting Height H(mm) | - | 6.5 ～ 16 | 24 ～ 42 | 24 ～ 42 | 24 ～ 60 | 28 ～ 70 | 24 ～ 33 | 24 ～ 33 | 12 ～ 35 |
| Nominal Part Number | - | 5 ～ 15 | 15 ～ 30 | 15 ～ 30 | 15 ～ 45 | 15 ～ 45 | 15 ～ 25 | 15 ～ 25 | 12 ～ 35 |
| Rail Type | - | Wide | Standard | Standard | Standard | Standard | Standard | Standard | Wide |
| Set / Single Item | - | Set | Set | Set | Set | Set | Set | Set | Set |
| Preload(N・m) | Standard | - | - | - | - | Standard / Light Preload / Heavy Preload | Standard / Light Preload / Heavy Preload | Standard / Light Preload / Heavy Preload | Standard |
| Accuracy(N・m) | High Grade | Standard Grade | Standard Grade | Standard Grade | Standard Grade | Standard Grade | Standard Grade | Standard Grade | Standard Grade |
| Material | Carbon Steel | Stainless Steel | Carbon Steel | Carbon Steel | Carbon Steel | Carbon Steel | Carbon Steel | Carbon Steel | Carbon Steel / Stainless Steel |
| Ball Arrangement | - | Standard | Standard | Standard | Standard | 4-Row, Circular | 4-Row, Circular | 4-Row, Circular | 4-Row, Circular |
| No. of Blocks(mm) | 1 ～ 9 | 1 ～ 9 | 1 ～ 9 | 1 ～ 9 | 1 ～ 9 | 1 ～ 4 | 1 ～ 4 | 1 ～ 4 | 1 ～ 4 |
| Retainer | - | N/A | N/A | N/A | N/A | - | - | - | Available |
| Block Mounting Hole Pitch (Width Direction)(mm) | - | - | - | - | - | - | - | - | 21 ～ 107 |
| Block Mounting Hole Pitch (Length Direction)(mm) | - | - | - | - | - | - | - | - | 12 ～ 60 |
| Block Mounting Hole Diameter | - | - | - | - | - | - | - | - | 3 ～ 8 |
| Rail Mounting Hole Pitch(mm) | - | - | - | - | - | - | - | - | 40 ～ 80 |
| Rail Mounting Hole Diameter | - | - | - | - | - | - | - | - | 4.5 ～ 7 |
Loading...
Configure
Specification/Dimensions
-
Rail Length L(mm)
- 25
- 35
- 39
- 40
- 45
- 50
- 55
- 70
- 75
- 80
- 85
- 95
- 100
- 110
- 115
- 120
- 130
- 135
- 140
- 145
- 150
- 155
- 160
- 170
- 175
- 190
- 195
- 200
- 205
- 215
- 220
- 230
- 235
- 245
- 250
- 255
- 260
- 265
- 270
- 275
- 280
- 290
- 295
- 310
- 315
- 320
- 335
- 340
- 345
- 350
- 355
- 360
- 370
- 375
- 390
- 395
- 400
- 415
- 420
- 430
- 435
- 440
- 445
- 455
- 460
- 470
- 475
- 495
- 510
- 515
- 520
- 535
- 545
- 550
- 555
- 570
- 575
- 580
- 590
- 595
- 600
- 615
- 620
- 630
- 635
- 640
- 645
- 670
- 680
- 695
- 700
- 710
- 720
- 745
- 750
- 760
- 770
- 790
- 795
- 820
- 830
- 840
- 845
- 870
- 880
- 895
- 910
- 920
- 940
- 945
- 950
- 970
- 990
- 1000
- 1060
- 1080
- 1120
- 1160
- 1180
- 1240
- 1300
- 1320
- 1360
- 1400
- 1420
- 1480
- 1540
- 1560
- 1600
- 1640
- 1660
- 1720
- 1780
- 1800
- 1840
- 1880
- 1900
- 1960
[110-1950/10mm Unit(s)][17-4000/1mm Unit(s)]
-
Block Type(mm)
-
Standard -
-
-
-
-
-
-
-
Rail Width(mm)
-
Mounting Height H(mm)
-
Nominal Part Number
-
Rail Type
-
Standard -
-
-
Set / Single Item
-
Preload(N・m)
See the accuracy standard of each manufacturer.
-
Accuracy(N・m)
See the accuracy standard of each manufacturer.
-
Material
-
Ball Arrangement
-
No. of Blocks(mm)
-
Retainer
-
Block Mounting Hole Pitch (Width Direction)(mm)
-
Block Mounting Hole Pitch (Length Direction)(mm)
-
Block Mounting Hole Diameter
-
Rail Mounting Hole Pitch(mm)
-
Rail Mounting Hole Diameter
CAD
-
- 2D
- 3D
Related Categories to Standard Linear Guides
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy