(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Spline Shaft（Nut Type：Flanged Type）
Nut Type
-
Key Provided Type -
Flanged Type
-
Ball Splines - Both Ends Tapped
MISUMI
This is the least expensive ball spline suitable for fixation using shaft holders, etc., or for incorporating into plates. This standard enables highly accurate linear motion and rotational torque transmission. In addition, the contact area between the ball groove machined into the shaft and the steel ball is large, resulting in a large load capacity and long life. Even a single axis can be used as a linear motion guide, allowing for a compact design.
A dustproof seal is attached to the nut, so the ball will not fall off even if the spline shaft is removed.Days to Ship: 8 Day(s) or more -
MISUMI
This is the least expensive ball spline suitable for fixation using shaft holders, etc., or for incorporating into plates. This standard enables highly accurate linear motion and rotational torque transmission. In addition, the contact area between the ball groove machined into the shaft and the steel ball is large, resulting in a large load capacity and long life. Even a single axis can be used as a linear motion guide, allowing for a compact design.
A dustproof seal is attached to the nut, so the ball will not fall off even if the spline shaft is removed.Days to Ship: 8 Day(s) or more -
Days to Ship: 11 Day(s) -
Ball Splines - One End Stepped and Threaded, One End Tapped
MISUMI
A ball spline with a stepped male thread on one end and a female thread on the other end. This standard enables highly accurate linear motion and rotational torque transmission. In addition, the contact area between the ball groove machined into the shaft and the steel ball is large, resulting in a large load capacity and long life. Even a single axis can be used as a linear motion guide, allowing for a compact design.
A dustproof seal is attached to the nut, so the ball will not fall off even if the spline shaft is removed.Days to Ship: 8 Day(s) or more -
MISUMI
ball spline with a female thread on one end. This standard enables highly accurate linear motion and rotational torque transmission. In addition, the contact area between the ball groove machined into the shaft and the steel ball is large, resulting in a large load capacity and long life. Even a single axis can be used as a linear motion guide, allowing for a compact design.
A dustproof seal is attached to the nut, so the ball will not fall off even if the spline shaft is removed.Days to Ship: 8 Day(s) or more -
Ball Splines - Both Ends Stepped Tapped
MISUMI
ball spline with stepped female threads on both ends. This standard enables highly accurate linear motion and rotational torque transmission. In addition, the contact area between the ball groove machined into the shaft and the steel ball is large, resulting in a large load capacity and long life. Even a single axis can be used as a linear motion guide, allowing for a compact design.
A dustproof seal is attached to the nut, so the ball will not fall off even if the spline shaft is removed.Days to Ship: 8 Day(s) or more -
Days to Ship: 11 Day(s) -
Days to Ship: 11 Day(s) -
Ball Splines - Both Ends Stepped
MISUMI
ball spline with stepped edges on both ends. This standard enables highly accurate linear motion and rotational torque transmission. In addition, the contact area between the ball groove machined into the shaft and the steel ball is large, resulting in a large load capacity and long life. Even a single axis can be used as a linear motion guide, allowing for a compact design.
Days to Ship: 8 Day(s) or more -
Ball Splines - One End Stepped and Threaded
MISUMI
ball spline with a stepped male thread on one end. This standard enables highly accurate linear motion and rotational torque transmission. In addition, the contact area between the ball groove machined into the shaft and the steel ball is large, resulting in a large load capacity and long life. Even a single axis can be used as a linear motion guide, allowing for a compact design.
A dustproof seal is attached to the nut, so the ball will not fall off even if the spline shaft is removed.Days to Ship: 8 Day(s) or more -
Days to Ship: 11 Day(s) -
High Torque Flange Type Ball Spline Model LBF (Medium Load Type)
THK
Utilizes a flange to fixate the housing using a bolt, which makes assembly easy. Ideal for housings with small widths or where there are concerns of deformation associated with machining key grooves into the housing.
Days to Ship: 34 Day(s) or more -
Medium-Torque Type, Flange Type Ball Spline, LF Type
THK
Utilizes a flange to fixate the housing using a bolt, which makes assembly easy. Ideal for housings with small widths or where there are concerns of deformation associated with machining key grooves into the housing.
Days to Ship: 19 Day(s) or more -
Miniature Hexagonal Spline, Single Nut (HTK) / Double Nut (HTKW) Series
OZAK
Miniature size (hexagonal axes 3, 4, 5) is standardized.
[Features]
・ It achieves downsizing and weight reduction of machinery
・ The combination of resin nut (PPS resin) and stainless steel shaft (SUS304) has excellent corrosion resistance and can be used in a wide range of environments
・ Non-backlash specifications (W Series) are also available as standard products- CAD ：
- 2D
Days to Ship: 15 Day(s) or more -
Ball Splines - One End Stepped
MISUMI
A ball spline with a stepped surface on one end. This standard enables highly accurate linear motion and rotational torque transmission. In addition, the contact area between the ball groove machined into the shaft and the steel ball is large, resulting in a large load capacity and long life. Even a single axis can be used as a linear motion guide, allowing for a compact design.
A dustproof seal is attached to the nut, so the ball will not fall off even if the spline shaft is removed.Days to Ship: 8 Day(s) or more -
Days to Ship: 11 Day(s) -
Days to Ship: 11 Day(s) -
Economy Ball Spline Double Type
NSB
[Features]
· Can transmit torque while performing linear motion.
· A compact and affordable ball spline.
* Stickers are applied to both sides.- CAD ：
- 2D
Days to Ship: 18 Day(s) or more -
Ball Splines - Both Ends Stepped and Threaded
MISUMI
A ball spline with stepped male threads on both ends. This standard enables highly accurate linear motion and rotational torque transmission. In addition, the contact area between the ball groove machined into the shaft and the steel ball is large, resulting in a large load capacity and long life. Even a single axis can be used as a linear motion guide, allowing for a compact design.
A dustproof seal is attached to the nut, so the ball will not fall off even if the spline shaft is removed.Days to Ship: 8 Day(s) or more -
Days to Ship: 11 Day(s) -
Days to Ship: 11 Day(s) -
Days to Ship: 11 Day(s) -
Days to Ship: 11 Day(s) -
Days to Ship: 11 Day(s) -
Days to Ship: 11 Day(s) -
Days to Ship: 11 Day(s) -
Days to Ship: 11 Day(s) -
Days to Ship: 11 Day(s) -
Days to Ship: 11 Day(s) -
Days to Ship: 11 Day(s) -
Days to Ship: 11 Day(s) -
Days to Ship: 11 Day(s) -
Days to Ship: 11 Day(s)
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Nut Type |
| Spline Shaft Outer Dia. D(Ø) |
| Type |
| Nut Length |
| Nut Overall Length L1(mm) |
| Nut Outer Dia. D1(Ø) |
| Preload |
| Accuracy Grade |
| End Shape (Left) |
| End Shape (Right) |
| Torque |
| Shaft material |
| Number of Nuts(pc(s).) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | THK | THK | OZAK | MISUMI | MISUMI | MISUMI | NSB | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI |
| Product Series | High Torque Flange Type Ball Spline Model LBF (Medium Load Type) | Miniature Hexagonal Spline, Single Nut (HTK) / Double Nut (HTKW) Series | Ball Splines Key Provided Straight Nut, One End Double Stepped and Threaded / One End Tapped | Ball Splines Round Flanged, One End Double Stepped and Threaded / One End Tapped | Ball Splines Key Provided Straight Nut, One End Double Stepped and Threaded | Ball Splines Round Flanged, One End Double Stepped and Threaded | Ball Splined-Hollow Type, Key Provided Straight Nut, Both Ends Tapped | Ball Splined-Hollow Type, Key Provided Straight Nut, One End Tapped | |||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Days to Ship | 8 Day(s) or more | 8 Day(s) or more | 11 Day(s) | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 11 Day(s) | 11 Day(s) | 8 Day(s) or more | 8 Day(s) or more | 11 Day(s) | 34 Day(s) or more | 19 Day(s) or more | 15 Day(s) or more | 8 Day(s) or more | 11 Day(s) | 11 Day(s) | 18 Day(s) or more | 8 Day(s) or more | 11 Day(s) | 11 Day(s) | 11 Day(s) | 11 Day(s) | 11 Day(s) | 11 Day(s) | 11 Day(s) | 11 Day(s) | 11 Day(s) | 11 Day(s) | 11 Day(s) | 11 Day(s) | 11 Day(s) | 11 Day(s) |
| Nut Type | Flanged Type | Flanged Type | Flanged Type | Flanged Type | Flanged Type | Flanged Type | Flanged Type | Flanged Type | Flanged Type | Flanged Type | Flanged Type | Flanged Type | Flanged Type | Flanged Type | Flanged Type | Flanged Type | Flanged Type | Flanged Type | Flanged Type | Flanged Type | Flanged Type | Flanged Type | Flanged Type | Flanged Type | Flanged Type | Flanged Type | Flanged Type | Flanged Type | Flanged Type | Flanged Type | Flanged Type | Flanged Type | Flanged Type |
| Spline Shaft Outer Dia. D(Ø) | 6 ～ 30.8 | 6 ～ 30.8 | 8 ～ 30 | 6 ～ 30.8 | 6 ～ 30.8 | 8 ～ 30.8 | 8 ～ 30 | 13 ～ 30 | 6 ～ 30.8 | 6 ～ 30.8 | 8 ～ 30 | - | - | - | 6 ～ 30.8 | 8 ～ 30 | 8 ～ 30 | 30.8 | 6 ～ 30.8 | 8 ～ 30 | 8 ～ 30 | 8 ～ 30 | 8 ～ 30 | 8 ～ 30 | 8 ～ 30 | 8 ～ 30 | 8 ～ 30 | 8 ～ 30 | 13 ～ 30 | 16 ～ 30 | 16 ～ 30 | 16 ～ 30 | 16 ～ 30 |
| Type | Solid | Solid | Solid | Solid | Solid | Solid | Solid | Hollow | Solid | Solid | Solid | Solid | Solid / Hollow / Hollow (Thin) | Polygonal | Solid | Solid | Solid | - | Solid | Solid | Solid | Solid | Solid | Solid | Solid | Solid | Solid | Solid | Hollow | Hollow | Hollow | Hollow | Hollow |
| Nut Length | Standard | Standard | - | Standard | Standard | Standard | - | - | Standard | Standard | - | Standard | Standard | Standard | Standard | - | - | Long | Standard | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Nut Overall Length L1(mm) | 25 ～ 80 | 25 ～ 80 | - | 25 ～ 80 | 25 ～ 80 | 25 ～ 80 | - | - | 25 ～ 80 | 25 ～ 80 | - | 40 | 125 | 11.5 ～ 17.5 | 25 ～ 80 | - | - | 122 | 25 ～ 80 | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Nut Outer Dia. D1(Ø) | 14 ～ 47 | 14 ～ 47 | - | 14 ～ 47 | 14 ～ 47 | 16 ～ 47 | - | - | 14 ～ 47 | 14 ～ 47 | - | 23 | 80 | 10 | 14 ～ 47 | - | - | 47 | 14 ～ 47 | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Preload | Standard | Standard | - | Standard | Standard | Standard | - | - | Standard | Standard | - | Standard / Light Preload / Medium Preload | Standard / Light Preload / Medium Preload | Standard | Standard | - | - | - | Standard | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Accuracy Grade | Standard Grade | Standard Grade | - | Standard Grade | Standard Grade | Standard Grade | - | - | Standard Grade | Standard Grade | - | Standard Grade / High Grade / Precision Grade | Standard Grade / High Grade / Precision Grade | Standard Grade | Standard Grade | - | - | - | Standard Grade | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| End Shape (Left) | Tapped | Standard | Stepped | Stepped and Threaded | Tapped | Stepped and Tapped | Tapped | Standard | Stepped | Stepped and Threaded | Tapped | Standard | Standard | Standard | Stepped | Tapped | Stepped | Standard | Stepped and Threaded | Standard | Standard | Tapped | Stepped | Stepped | Stepped and Threaded | Stepped and Threaded | Stepped and Threaded | Stepped and Threaded | Standard | Tapped | Tapped | Tapped | Tapped |
| End Shape (Right) | Tapped | Standard | Standard | Tapped | Standard | Stepped and Tapped | Standard | Standard | Stepped | Standard | Tapped | Standard | Standard | Standard | Standard | Tapped | Stepped | Standard | Stepped and Threaded | Standard | Standard | Standard | Stepped | Standard | Tapped | Tapped | Standard | Standard | Standard | Tapped | Tapped | Standard | Standard |
| Torque | Middle Torque | Middle Torque | - | Middle Torque | Middle Torque | Middle Torque | - | - | Middle Torque | Middle Torque | - | High Torque | Middle Torque | Middle Torque | Middle Torque | - | - | High Torque | Middle Torque | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Shaft material | SUS440C Equivalent / SUJ2 Equivalent | SUS440C Equivalent / SUJ2 Equivalent | SUJ2 Equivalent | SUS440C Equivalent / SUJ2 Equivalent | SUS440C Equivalent / SUJ2 Equivalent | SUS440C Equivalent / SUJ2 Equivalent | SUJ2 Equivalent | SUJ2 Equivalent | SCM415 Equivalent / SUS440C Equivalent | SUS440C Equivalent / SUJ2 Equivalent | SUJ2 Equivalent | - | - | SUS304 | SUS440C Equivalent / SUJ2 Equivalent | SUJ2 Equivalent | SUJ2 Equivalent | SUJ2 | SUS440C Equivalent / SUJ2 Equivalent | SUJ2 Equivalent | SUJ2 Equivalent | SUJ2 Equivalent | SUJ2 Equivalent | SUJ2 Equivalent | SUJ2 Equivalent | SUJ2 Equivalent | SUJ2 Equivalent | SUJ2 Equivalent | SUJ2 Equivalent | SUJ2 Equivalent | SUJ2 Equivalent | SUJ2 Equivalent | SUJ2 Equivalent |
| Number of Nuts(pc(s).) | - | 1 ～ 2 | - | - | - | - | - | - | - | - | - | 1 | 1 ～ 5 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Spline Shaft Outer Dia. D(Ø)
-
Type
- Solid
- Hollow
- Hollow (Thin)
- Polygonal
-
Nut Length
-
Nut Overall Length L1(mm)
-
Nut Outer Dia. D1(Ø)
-
Preload
-
Accuracy Grade
-
End Shape (Left)
-
Standard -
Tapped -
Stepped -
Stepped and Tapped -
Stepped and Threaded
-
-
End Shape (Right)
-
Standard -
Tapped -
Stepped -
Stepped and Tapped -
Stepped and Threaded
-
-
Torque
- High Torque
- Middle Torque
-
Shaft material
- SCM415 Equivalent
- SUJ2
- SUS440C Equivalent
- SUS304
- SUJ2 Equivalent
-
Number of Nuts(pc(s).)
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
Days to Ship
-
- All
- 4 Day(s) or Less
- 5 Day(s) or Less
- 8 Day(s) or Less
- 9 Day(s) or Less
- 10 Day(s) or Less
- 11 Day(s) or Less
- 12 Day(s) or Less
- 13 Day(s) or Less
- 15 Day(s) or Less
- 18 Day(s) or Less
Related Categories to Spline Shaft
-
- Linear Shafts
- Shaft Supports
- Shaft Collars
- Linear Bushings
- Ball Guides
- Spline Shaft
- Oil Free Bushings, Washers
- Linear Motor Actuators
- Oil Free Plates, Guide Rails
- Linear Guides
- Cable Carriers
- Ball Screw
- Support Units
- Lead Screws, Slide Screws
- Cross Roller
- Slide Packs, V Guides, Linear Rails
- Actuators/Single Axis Robot
- Other Linear Motion Related Components
- Bellows
-
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy