(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Shaft Collars（Fastening Method：Slit）
Fastening Method
-
Set Screw -
Slit -
Split -
Hinged -
Wedge -
One-Touch
-
Standard Price: MYR 8.78- Days to Ship: 1 Day(s) -
Shaft Collar (Clamp) - Standard / Compact
MISUMI
Compared to the standard type, it is up to 33% more compact in width and 16% more compact in outer diameter.
- Volume Discount
Standard Price: MYR 14.85- Days to Ship: 1 Day(s) or more -
Shaft Collar (Clamp) - 2-Hole / 2-Tapped (Coarse)
MISUMI
"Since the mounting hole is machined, this product can be mounted on plates and brackets."
- Volume Discount
Standard Price: MYR 21.83- Days to Ship: 1 Day(s) or more -
MISUMI
For holding the inner diameter of the bearing. Compared to bearing-specific nuts, special tools are not required and it is cheaper.
- Volume Discount
Standard Price: MYR 27.88- Days to Ship: 1 Day(s) or more -
Standard Price: MYR 13.59- Days to Ship: 1 Day(s) or more -
Standard Price: MYR 10.06- Days to Ship: 1 Day(s) -
Standard Price: MYR 13.86- Days to Ship: 1 Day(s) or more -
Shaft Collar (Clamp) - 2 Counterbored Holes / 3 Counterbored Holes
MISUMI
"Since the mounting hole is machined, this product can be mounted on plates and brackets."
- Volume Discount
Standard Price: MYR 41.22- Days to Ship: 1 Day(s) or more -
Shaft Collar - Standard with Urethane, Clamp Type / Standard with Urethane, Split Type
MISUMI
It is possible to avoid metallic noise caused by contact between metal parts.
- Volume Discount
Standard Price: MYR 29.10- Days to Ship: 1 Day(s) or more -
Standard Price: MYR 49.49- Days to Ship: 1 Day(s) or more -
Shaft Collar (2-Flats) - Standard Clamp / Cut Surface Mount Hole Clamp / Side Mount Hole Clamp
MISUMI
Cutting on two sides saves space. The mounting hole type allows for easy installation of the sensor bracket.
- Volume Discount
Standard Price: MYR 30.81- Days to Ship: 2 Day(s) or more -
Shaft Collar - Standard Type with Clamp Lever / Compact Type with Clamp Lever - Side Mount Hole
MISUMI
Unitization with a clamp lever eliminates the need for tightening tools, making setup changes quick.
- Volume Discount
Standard Price: MYR 136.96- Days to Ship: 4 Day(s) or more -
Shaft Collar (Threaded Bore) - Clamp Type
MISUMI
The Inner Dia. Part is thread-machined. Use this produce in combination with threaded shafts.
- Volume Discount
Standard Price: MYR 20.61- Days to Ship: 1 Day(s) or more -
Shaft Collar - DCut Standard / Compact (Space-Saving Design) - Clamp
MISUMI
The sensor bracket can be easily mounted using the mounting holes on the cut surface.
- Volume Discount
Standard Price: MYR 42.44- Days to Ship: 1 Day(s) or more -
Shaft Collar (Key Relief Groove) - Clamp
MISUMI
Collar has clearance for a key on the shaft. (The Key Groove Clearance Channel is not for key-locking the collar itself.)
- Volume Discount
Standard Price: MYR 35.21- Days to Ship: 2 Day(s) or more -
Shaft Collar - Standard Type with Clamp Lever - Clamp Type
MISUMI
Unitization with a clamp lever eliminates the need for tightening tools, making setup changes quick.
- Volume Discount
Standard Price: MYR 123.75- Days to Ship: 2 Day(s) or more -
Shaft Collar - Compact Type with Clamp Lever - D Cut
MISUMI
Unitization with a clamp lever eliminates the need for tightening tools, making setup changes quick.
- Volume Discount
Standard Price: MYR 140.79- Days to Ship: 2 Day(s) or more -
MISUMI
The sensor bracket can be easily installed using the mounting holes on the side.
- Volume Discount
Standard Price: MYR 31.52- Days to Ship: 4 Day(s) or more -
IWATA MFG
High number of variations from top manufacturers
Standard Price: MYR 23.68- Days to Ship: 5 Day(s) or more -
Shaft Collar (Clamp) - 3-Hole / 3-Tapped (Coarse)
MISUMI
"Since the mounting hole is machined, this product can be mounted on plates and brackets."
- Volume Discount
Standard Price: MYR 24.25- Days to Ship: 2 Day(s) or more -
![[Clean & Pack]Shaft Collar Clamp - Threaded Insert, Aluminum Type](//my.misumi-ec.com/linked/material/mech/MSM1/PHOTO/110310984779_001.jpg?$product_view_b$)
[Clean & Pack]Shaft Collar Clamp - Threaded Insert, Aluminum Type
MISUMI
Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.■Part Number for Clean & Pack Products·Degreasing (Anti-rust single packing) : Part Number SL-□□ ·Precision cleaning (Degassing double packing) : Part Number SH-□□ ·Electrolytic polishing + precision cleaning (Degassing double packing) : Part Number SHD-□□ Product Part Number Cleaning Method Packaging Type Effects Compared to Uncleaned Product Environment (Standard) Process SL-□□ Degreasing Anti-rust Packing Oil removal General environment Regular assembly process Post battery assembly process SH-□□ Precision cleaning Degassing double packing Oil removal
Dust removalClean environment (Class 10 to 1,000) Battery assembly process LCD-related post assembly process In-vehicle camera assembly process SHD-□□ Electrolytic polishing + precision cleaning Degassing double packing Oil removal
Dust removal
Outgas reductionVacuum environment
Clean environment (Class 10 to 1,000)Pre-semiconductor process Liquid crystal deposition process Pre-OLED process ■Notes
Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.
Aluminum is superior in weight reduction compared to steel and stainless steel. With Threaded Inserts improves the mechanical strength of the threaded part.- Volume Discount
Standard Price: MYR 58.85- Days to Ship: 6 Day(s) or more -
![[Clean & Pack]Shaft Collar - D Cut, Standard, Compact, Clamp](//my.misumi-ec.com/linked/material/mech/MSM1/PHOTO/110310984959_001.jpg?$product_view_b$)
[Clean & Pack]Shaft Collar - D Cut, Standard, Compact, Clamp
MISUMI
Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.■Part Number for Clean & Pack Products・Degreasing (Anti-rust single packing) : Part Number SL-□□ ・Precision cleaning (Degassing double packing) : Part Number SH-□□ ・Electrolytic polishing + precision cleaning (Degassing double packing) : Part Number SHD-□□ Product Part Number Cleaning Method Packaging Type Effects Compared to Uncleaned Product Environment (Standard) Process SL-□□ Degreasing Anti-rust Packing Oil removal General environment Regular assembly process Post battery assembly process SH-□□ Precision cleaning Degassing double packing Oil removal
Dust removalClean environment (Class 10 to 1,000) Battery assembly process LCD-related post assembly process In-vehicle camera assembly process SHD-□□ Electrolytic polishing + precision cleaning Degassing double packing Oil removal
Dust removal
Outgas reductionVacuum environment
Clean environment (Class 10 to 1,000)Pre-semiconductor process Liquid crystal deposition process Pre-OLED process ■Notes
Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.
Mounting holes on a flat side facilitate installation of sensor brackets.- Volume Discount
Standard Price: MYR 61.93- Days to Ship: 6 Day(s) or more -
Standard Slit Collar With 2 Holes
IWATA MFG
Abundant variations you can only get from a top manufacturer.
Standard Price: MYR 38.28- Days to Ship: 5 Day(s) or more -
Standard Slit Collar for Bearing Fixing
IWATA MFG
Abundant variations you can only get from a top manufacturer.
Standard Price: MYR 43.93- Days to Ship: 5 Day(s) or more -
Standard Slit Collar (Long) for Bearing Fixing
IWATA MFG
Abundant variations you can only get from a top manufacturer.
[Features]
· Designed to prevent housing interference.
· Long boss bearing fixing shaft collar with small outer diameter and widthStandard Price: MYR 49.50- Days to Ship: 5 Day(s) or more -
Standard Slit Collar Inner Diameter Screw (Cylinder Use)
IWATA MFG
[Features]
· Internal diameter screw with circumferential knurled machiningStandard Price: MYR 49.50- Days to Ship: 5 Day(s) or more -
Shaft Collar Threaded Inserts (Lightweight) - Plastic, Clamp
MISUMI
Resin is superior in weight reduction compared to iron and stainless steel. Contains a threaded insert to improve the mechanical strength of the threaded part.
- Volume Discount
Standard Price: MYR 37.47- Days to Ship: 4 Day(s) or more -
Shaft Collar Threaded Inserts (Lightweight) - Aluminum, Clamp
MISUMI
Aluminum is superior in weight reduction compared to iron and stainless steel. Contains a threaded insert to improve the mechanical strength of the threaded part.
- Volume Discount
Standard Price: MYR 40.71- Days to Ship: 4 Day(s) or more -
![[Clean & Pack]Shaft Collar - Clamp, 2-Hole, Counterbored](//content.misumi-ec.com/image/upload/t_product_view_b/t_misumi_wm/v1/p/jp/product/series/110310634409/110310634409_001_20230911105917.jpg?$product_view_b$)
[Clean & Pack]Shaft Collar - Clamp, 2-Hole, Counterbored
MISUMI
Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.■Part Number for Clean & Pack Products·Degreasing (Anti-rust single packing) : Part Number SL-□□ ·Precision cleaning (Degassing double packing) : Part Number SH-□□ ·Electrolytic polishing + precision cleaning (Degassing double packing) : Part Number SHD-□□ Product Part Number Cleaning Method Packaging Type Effects Compared to Uncleaned Product Environment (Standard) Process SL-□□ Degreasing Anti-rust Packing Oil removal General environment Regular assembly process Post battery assembly process SH-□□ Precision cleaning Degassing double packing Oil removal
Dust removalClean environment (Class 10 to 1,000) Battery assembly process LCD-related post assembly process In-vehicle camera assembly process SHD-□□ Electrolytic polishing + precision cleaning Degassing double packing Oil removal
Dust removal
Outgas reductionVacuum environment
Clean environment (Class 10 to 1,000)Pre-semiconductor process Liquid crystal deposition process Pre-OLED process ■Notes
Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.- Volume Discount
Standard Price: MYR 70.38- Days to Ship: 6 Day(s) or more -
![[Clean & Pack] Shaft Collar - Clamp, Compact, Standard](//content.misumi-ec.com/image/upload/t_product_view_b/t_misumi_wm/v1/p/jp/product/series/110310634679/110310634679_001_20231219183009.jpg?$product_view_b$)
[Clean & Pack] Shaft Collar - Clamp, Compact, Standard
MISUMI
Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.■Part Number for Clean & Pack Products·Degreasing (Anti-rust single packing) : Part Number SL-□□ ·Precision cleaning (Degassing double packing) : Part Number SH-□□ ·Electrolytic polishing + precision cleaning (Degassing double packing) : Part Number SHD-□□ Product Part Number Cleaning Method Packaging Type Effects Compared to Uncleaned Product Environment (Standard) Process SL-□□ Degreasing Anti-rust Packing Oil removal General environment Regular assembly process Post battery assembly process SH-□□ Precision cleaning Degassing double packing Oil removal
Dust removalClean environment (Class 10 to 1,000) Battery assembly process LCD-related post assembly process In-vehicle camera assembly process SHD-□□ Electrolytic polishing + precision cleaning Degassing double packing Oil removal
Dust removal
Outgas reductionVacuum environment
Clean environment (Class 10 to 1,000)Pre-semiconductor process Liquid crystal deposition process Pre-OLED process ■Notes
Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.- Volume Discount
Standard Price: MYR 46.92- Days to Ship: 6 Day(s) or more -
Shaft Collar KSC-SL2 Fixing Slit Type With 2 Holes
KATAYAMA CHAIN
Optimal for fixing positioning for sprockets, timing belt pulleys, etc. Clamp provides effective and sturdy mounting. Includes 2 bolts.
Standard Price: MYR 31.81- Days to Ship: 5 Day(s) or more -
KATAYAMA CHAIN
Optimal for fixing positioning for sprockets, timing belt pulleys, etc. Clamp provides effective and sturdy mounting. Includes 1 bolts.
Standard Price: MYR 20.82- Days to Ship: 5 Day(s) or more -
Two holes stainless steel slit type for fixing SSC-SL2
KATAYAMA CHAIN
It can be securely attached to the positioning and fixing of stainless steel sprockets, timing belt pulleys, etc., with the ideal clamping effect. Includes 2 bolts.
Standard Price: MYR 52.57- Days to Ship: 10 Day(s) or more -
SSC-SL stainless steel slit type
KATAYAMA CHAIN
[Features]
・ It can be securely attached to the positioning and fixing of stainless steel sprockets, timing belt pulleys, etc., with the ideal clamping effect
・ Includes 1 boltsStandard Price: MYR 37.82- Days to Ship: 5 Day(s) or more -
KONISHI
It can be tightened and fixed without damaging the shaft. [Specifications]·Main body material: steel S45C, surface treatment: black oxide coating, hex socket head cap screw, material: steel material SCM435, surface treatment: black oxide coating
- CAD ：
- 2D
Standard Price: MYR 46.07- Days to Ship: 4 Day(s) or more -
Slit Collar (Stainless Steel)SCS-sus
KONISHI
Can be used for tightening and fixing without damaging the shaft. Made of stainless steel.
- CAD ：
- 2D
Standard Price: MYR 56.20- Days to Ship: 6 Day(s) or more -
Standard Slit Collar With 3 Holes
IWATA MFG
Abundant variations you can only get from a top manufacturer.
Standard Price: MYR 41.06- Days to Ship: 5 Day(s) or more -
Standard Slit Collar With 2 Screw Holes
IWATA MFG
Abundant variations you can only get from a top manufacturer.
Standard Price: MYR 43.93- Days to Ship: 5 Day(s) or more -
Standard Slit Collar With 3 Screw Holes
IWATA MFG
Abundant variations you can only get from a top manufacturer.
Standard Price: MYR 72.04- Days to Ship: 5 Day(s) or more -
Standard Slit Collar, without D Cut Screw
IWATA MFG
Abundant variations you can only get from a top manufacturer.
Standard Price: MYR 60.82- Days to Ship: 5 Day(s) or more -
Standard Slit Collar With D Cut Screw
IWATA MFG
Abundant variations you can only get from a top manufacturer.
Standard Price: MYR 57.95- Days to Ship: 1 Day(s) or more -
Standard Slit Collar Inner Diameter Screw (Fine)
IWATA MFG
Abundant variations you can only get from a top manufacturer.
Standard Price: MYR 41.06- Days to Ship: 5 Day(s) or more -
Standard Slit Collar, Hexagonal Screw With Inner Diameter (Fine)
IWATA MFG
[Features]
· Abundant variations you can only get from a top manufacturer.Standard Price: MYR 66.39- Days to Ship: 5 Day(s) or more -
Standard Slit Collar, Hexagonal Inner Diameter Screw (Coarse)
IWATA MFG
Abundant variations you can only get from a top manufacturer.
Standard Price: MYR 66.39- Days to Ship: 5 Day(s) or more -
Standard Slit Collar With Key Relief Grooved
IWATA MFG
Abundant variations you can only get from a top manufacturer.
Standard Price: MYR 60.82- Days to Ship: 5 Day(s) or more
![[Clean & Pack]Shaft Collar Clamp - Threaded Insert, Aluminum Type](http://my.misumi-ec.com/linked/material/mech/MSM1/PHOTO/110310984779_001.jpg?$product_view_b$)
![[Clean & Pack]Shaft Collar - D Cut, Standard, Compact, Clamp](http://my.misumi-ec.com/linked/material/mech/MSM1/PHOTO/110310984959_001.jpg?$product_view_b$)
![[Clean & Pack]Shaft Collar - Clamp, 2-Hole, Counterbored](http://content.misumi-ec.com/image/upload/t_product_view_b/t_misumi_wm/v1/p/jp/product/series/110310634409/110310634409_001_20230911105917.jpg?$product_view_b$)
![[Clean & Pack] Shaft Collar - Clamp, Compact, Standard](http://content.misumi-ec.com/image/upload/t_product_view_b/t_misumi_wm/v1/p/jp/product/series/110310634679/110310634679_001_20231219183009.jpg?$product_view_b$)
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Specifications |
| Fastening Method |
| Environmentally Friendly |
| Specifications |
| Properties / applications |
| I.D.(mm) |
| O.D.(mm) |
| Width(mm) |
| Material |
| Surface Treatment |
| Thickness |
| Side Milling |
| Cleaning Method |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | IWATA MFG | MISUMI | MISUMI | MISUMI | IWATA MFG | IWATA MFG | IWATA MFG | IWATA MFG | MISUMI | MISUMI | MISUMI | MISUMI | KATAYAMA CHAIN | KATAYAMA CHAIN | KATAYAMA CHAIN | KATAYAMA CHAIN | KONISHI | KONISHI | IWATA MFG | IWATA MFG | IWATA MFG | IWATA MFG | IWATA MFG | IWATA MFG | IWATA MFG | IWATA MFG | IWATA MFG |
| Product Series | Shaft Collar (Clamp) - 2 Counterbored Holes / 3 Counterbored Holes | Shaft Collar - Standard with Urethane, Clamp Type / Standard with Urethane, Split Type | Shaft Collar (2-Flats) - Standard Clamp / Cut Surface Mount Hole Clamp / Side Mount Hole Clamp | Shaft Collar - Standard Type with Clamp Lever / Compact Type with Clamp Lever - Side Mount Hole | Shaft Collar - DCut Standard / Compact (Space-Saving Design) - Clamp | [Clean & Pack]Shaft Collar Clamp - Threaded Insert, Aluminum Type | [Clean & Pack]Shaft Collar - D Cut, Standard, Compact, Clamp | Shaft Collar Threaded Inserts (Lightweight) - Plastic, Clamp | Shaft Collar Threaded Inserts (Lightweight) - Aluminum, Clamp | Standard Slit Collar, Hexagonal Screw With Inner Diameter (Fine) | Standard Slit Collar, Hexagonal Inner Diameter Screw (Coarse) | ||||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Days to Ship | 1 Day(s) | 1 Day(s) or more | 1 Day(s) or more | 1 Day(s) or more | 1 Day(s) or more | 1 Day(s) | 1 Day(s) or more | 1 Day(s) or more | 1 Day(s) or more | 1 Day(s) or more | 2 Day(s) or more | 4 Day(s) or more | 1 Day(s) or more | 1 Day(s) or more | 2 Day(s) or more | 2 Day(s) or more | 2 Day(s) or more | 4 Day(s) or more | 5 Day(s) or more | 2 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 10 Day(s) or more | 5 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 1 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more |
| Specifications |
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||||
| Fastening Method | Slit | Slit | Slit | Slit | Slit | Slit | Slit | Slit | Slit | Slit | Slit | Slit | Slit | Slit | Slit | Slit | Slit | Slit | Slit | Slit | Slit | Slit | Slit | Slit | Slit | Slit | Slit | Slit | Slit | Slit | Slit | Slit | Slit | Slit | Slit | Slit | Slit | Slit | Slit | Slit | Slit | Slit | Slit | Slit | Slit |
| Environmentally Friendly | - | RoHS compliant (10 substances) | RoHS compliant (10 substances) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Specifications | Standard | Standard | Side Mount Hole | For Bearing Mounting | Standard | For Bearing Mounting | Standard | Side Mount Hole | Urethane | Urethane | Side Mount Hole / 2-Flats | With Clamp Lever / Side Mount Hole | Threaded Bore | D Cut | Key Relief Groove | With Clamp Lever | With Clamp Lever / D Cut | Side Mount Hole | Standard | Side Mount Hole | Standard | D Cut | Side Mount Hole | For Bearing Mounting | For Bearing Mounting | Side Mount Hole / Threaded Bore | Standard | Standard | Side Mount Hole | Standard | Side Mount Hole | Standard | Side Mount Hole | Standard | Standard | Standard | Side Mount Hole | Side Mount Hole | Side Mount Hole | D Cut | D Cut | Threaded Bore | Threaded Bore | Threaded Bore | Key Relief Groove |
| Properties / applications | - | Corrosion resistance / chemical resistance ～ Not Applicable | Corrosion resistance / chemical resistance ～ Not Applicable | - | - | - | - | - | - | - | - | - | - | Corrosion resistance / chemical resistance ～ Not Applicable | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| I.D.(mm) | 6 ～ 30 | 3 ～ 100 | 6 ～ 50 | 3 ～ 50 | 8 ～ 30 | 6 ～ 30 | 8 ～ 30 | 6 ～ 50 | 3 ～ 50 | 4 ～ 50 | 6 ～ 40 | 6 ～ 30 | 3 ～ 30 | 8 ～ 50 | 10 ～ 30 | 6 ～ 30 | 6 ～ 30 | 8 ～ 30 | 3 ～ 120 | 6 ～ 50 | 8 ～ 30 | 8 ～ 30 | 6 ～ 50 | 3 ～ 40 | 8 ～ 55 | - | 8 ～ 30 | 8 ～ 30 | 6 ～ 50 | 3 ～ 50 | 6 ～ 50 | 3 ～ 120 | 6 ～ 50 | 5 ～ 50 | 8 ～ 50 | 8 ～ 40 | 6 ～ 50 | 6 ～ 50 | 15 ～ 40 | 15 ～ 40 | 8 ～ 50 | 6 ～ 35 | 8 ～ 35 | 8 ～ 30 | 15 ～ 50 |
| O.D.(mm) | 20 ～ 55 | 16 ～ 150 | 20 ～ 85 | 16 ～ 85 | 25 ～ 55 | 20 ～ 55 | 25 ～ 55 | 24 ～ 88 | 15 ～ 85 | 15 ～ 85 | 20 ～ 70 | 28 ～ 70 | 16 ～ 55 | 30 ～ 85 | 30 ～ 55 | 35 ～ 70 | 28 ～ 70 | 22 ～ 55 | 15 ～ 180 | 20 ～ 85 | 25 ～ 55 | 30 ～ 55 | 20 ～ 85 | 15 ～ 70 | 20 ～ 80 | 23 ～ 52 | 25 ～ 60 | 25 ～ 55 | 24 ～ 88 | 16 ～ 85 | 20 ～ 85 | 15 ～ 180 | 20 ～ 80 | 6 ～ 85 | 30 ～ 85 | 30 ～ 70 | 20 ～ 85 | 20 ～ 85 | 40 ～ 70 | 40 ～ 70 | 30 ～ 85 | 20 ～ 60 | 26 ～ 60 | 26 ～ 54 | 40 ～ 85 |
| Width(mm) | 8 ～ 15 | 6 ～ 36 | 8 ～ 30 | 9 ～ 26 | 8 ～ 15 | 9 ～ 17.5 | 8 ～ 15 | 8 ～ 22 | 10 ～ 27 | 10 ～ 27 | 8 ～ 18 | 12 ～ 18 | 8 ～ 15 | 8 ～ 22 | 10 ～ 15 | 18 | 12 ～ 18 | 6 ～ 15 | 8 ～ 36 | 8 ～ 22 | 8 ～ 15 | 8 ～ 15 | 8 ～ 22 | - | - | - | 8 ～ 15 | 8 ～ 15 | 8 ～ 22 | 6 ～ 22 | 8 ～ 22 | 8 ～ 36 | 8 ～ 22 | 10 ～ 22 | 15 ～ 22 | 15 ～ 18 | 8 ～ 22 | 8 ～ 22 | - | - | - | - | - | - | - |
| Material | Aluminum | Steel / Stainless Steel / Aluminum | Steel / Stainless Steel / Aluminum | Steel / Stainless Steel / Aluminum | Aluminum | Aluminum | Aluminum | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel / Aluminum | Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel / Aluminum / Plastic | Steel / Stainless Steel | Aluminum | Aluminum | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel | Plastic | Aluminum | Stainless Steel | Stainless Steel | Steel | Steel | Stainless Steel | Stainless Steel | Steel | Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel | Steel | Steel / Stainless Steel | Steel | Steel / Stainless Steel | Steel | Steel / Stainless Steel |
| Surface Treatment | Surface Treatment | No Surface Treatment / Surface Treatment | No Surface Treatment / Surface Treatment | No Surface Treatment / Surface Treatment | Surface Treatment | Surface Treatment | Surface Treatment | No Surface Treatment / Surface Treatment | No Surface Treatment / Surface Treatment | No Surface Treatment / Surface Treatment | No Surface Treatment / Surface Treatment | No Surface Treatment / Surface Treatment | No Surface Treatment / Surface Treatment | No Surface Treatment / Surface Treatment | Surface Treatment | No Surface Treatment / Surface Treatment | No Surface Treatment / Surface Treatment | No Surface Treatment / Surface Treatment | No Surface Treatment / Surface Treatment | No Surface Treatment / Surface Treatment | No Surface Treatment | No Surface Treatment / Surface Treatment | No Surface Treatment / Surface Treatment | No Surface Treatment / Surface Treatment | No Surface Treatment / Surface Treatment | Surface Treatment | No Surface Treatment | No Surface Treatment | No Surface Treatment | No Surface Treatment | Surface Treatment | Surface Treatment | No Surface Treatment | No Surface Treatment | Surface Treatment | No Surface Treatment | No Surface Treatment / Surface Treatment | No Surface Treatment / Surface Treatment | Surface Treatment | Surface Treatment | No Surface Treatment / Surface Treatment | Surface Treatment | No Surface Treatment / Surface Treatment | Surface Treatment | No Surface Treatment / Surface Treatment |
| Thickness | Standard Type | Standard Type / Compact Type | Standard Type | Standard Type / Compact Type | Standard Type | Standard Type | Standard Type | Standard Type | Standard Type / Compact Type | Standard Type / Compact Type | Standard Type | Standard Type / Compact Type | Standard Type | Standard Type / Compact Type | Standard Type | Standard Type | Standard Type / Compact Type | Standard Type / Compact Type | Standard Type | Standard Type | Standard Type | Standard Type / Compact Type | Standard Type | Standard Type | Standard Type | Standard Type | Standard Type | Standard Type | Standard Type | Standard Type / Compact Type | Standard Type | Standard Type | Standard Type | Standard Type | Standard Type | Standard Type | Standard Type | Standard Type | Standard Type | Standard Type | Standard Type | Standard Type | Standard Type | Standard Type | Standard Type |
| Side Milling | Not Provided | Not Provided | 2-Hole / 2-Tapped | Not Provided | 2-Hole | Not Provided | 2-Hole | 2 Counterbored Holes / 3 Counterbored Holes | Not Provided | Not Provided | Not Provided / 2-Tapped | 2-Tapped | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | 2-Tapped | Not Provided | 3-Hole / 3-Tapped | Not Provided | Not Provided | 2-Hole | Not Provided | Not Provided | 2-Hole | Not Provided | Not Provided | 2 Counterbored Holes | Not Provided | 2-Hole | Not Provided | 2-Hole | Not Provided | - | - | 3-Hole | 2-Tapped | 3-Tapped | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided |
| Cleaning Method | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Degreasing / Precision Cleaning | Degreasing / Precision Cleaning | - | - | - | - | - | - | Degreasing / Precision Cleaning / Electrolytic polishing + precision cleaning | Degreasing / Precision Cleaning / Electrolytic polishing + precision cleaning | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
![[Clean & Pack]Shaft Collar Clamp - Threaded Insert, Aluminum Type](http://my.misumi-ec.com/linked/material/mech/MSM1/PHOTO/110310984779_001.jpg?$product_view_c$)
![[Clean & Pack]Shaft Collar - D Cut, Standard, Compact, Clamp](http://my.misumi-ec.com/linked/material/mech/MSM1/PHOTO/110310984959_001.jpg?$product_view_c$)
![[Clean & Pack]Shaft Collar - Clamp, 2-Hole, Counterbored](http://content.misumi-ec.com/image/upload/t_product_view_c/t_misumi_wm/v1/p/jp/product/series/110310634409/110310634409_001_20230911105917.jpg?$product_view_c$)
![[Clean & Pack] Shaft Collar - Clamp, Compact, Standard](http://content.misumi-ec.com/image/upload/t_product_view_c/t_misumi_wm/v1/p/jp/product/series/110310634679/110310634679_001_20231219183009.jpg?$product_view_c$)
Loading...
Configure
Specification/Dimensions
-
Environmentally Friendly
-
Specifications
-
Standard -
With Clamp Lever -
For Bearing Mounting -
Urethane -
Side Mount Hole -
D Cut -
2-Flats -
Threaded Bore -
Key Relief Groove
-
-
Properties / applications
-
I.D.(mm)
-
O.D.(mm)
- 6
- 7
- 8
- 10
- 11
- 12
- 13
- 14
- 15
- 16
- 17
- 17.2
- 18
- 18.7
- 19
- 20
- 21.7
- 22
- 23
- 24
- 24.2
- 25
- 26
- 27
- 28
- 29
- 29.2
- 30
- 31
- 32
- 33
- 33.2
- 34
- 34.5
- 35
- 35.5
- 36
- 38
- 39
- 40
- 40.2
- 41
- 42
- 44
- 45
- 46
- 46.2
- 47
- 48
- 49
- 50
- 51
- 51.5
- 52
- 52.2
- 53
- 54
- 55
- 56
- 57
- 58
- 59
- 60
- 62
- 63
- 64
- 65
- 65.4
- 66.5
- 68
- 69
- 70
- 72
- 75
- 78
- 79
- 79.5
- 80
- 81
- 83
- 85
- 86
- 88
- 90
- 94
- 95
- 105
- 110
- 113
- 115
- 119
- 126
- 130
- 135
- 140
- 150
- 170
- 180
-
Width(mm)
-
Material
- Steel
- Stainless Steel
- Aluminum
- Plastic
-
Surface Treatment
- No Surface Treatment
- Surface Treatment
-
Thickness
-
Side Milling
-
Cleaning Method
- Degreasing
- Precision Cleaning
- Electrolytic polishing + precision cleaning
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
Days to Ship
-
- All
- 1 Day(s) or Less
- 2 Day(s) or Less
- 4 Day(s) or Less
- 5 Day(s) or Less
- 6 Day(s) or Less
- 7 Day(s) or Less
- 8 Day(s) or Less
- 9 Day(s) or Less
- 10 Day(s) or Less
- 11 Day(s) or Less
Related Categories to Shaft Collars
-
- Linear Shafts
- Shaft Supports
- Shaft Collars
- Linear Bushings
- Ball Guides
- Spline Shaft
- Oil Free Bushings, Washers
- Linear Motor Actuators
- Oil Free Plates, Guide Rails
- Linear Guides
- Cable Carriers
- Ball Screw
- Support Units
- Lead Screws, Slide Screws
- Cross Roller
- Slide Packs, V Guides, Linear Rails
- Actuators/Single Axis Robot
- Other Linear Motion Related Components
- Bellows
-
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy