(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Shaft Collars（Surface Treatment：No Surface Treatment）
Fastening Method
-
Set Screw -
Slit -
Split -
Hinged -
Wedge -
One-Touch
-
Shaft Collar (Clamp) - Standard / Compact
MISUMI
Compared to the standard type, it is up to 33% more compact in width and 16% more compact in outer diameter.
- Volume Discount
Standard Price: MYR 14.85- Days to Ship: 1 Day(s) or more -
Shaft Collar (Set Screw) - Standard / Wide / Compact
MISUMI
It's cheap and common. Also, compared to the standard type, it is up to 25% more compact in width and 15% more compact in outer diameter.
- Volume Discount
Standard Price: MYR 6.04- Days to Ship: 1 Day(s) or more -
Shaft Collar (Clamp) - 2-Hole / 2-Tapped (Coarse)
MISUMI
"Since the mounting hole is machined, this product can be mounted on plates and brackets."
- Volume Discount
Standard Price: MYR 42.44- Days to Ship: 2 Day(s) or more -
MISUMI
For holding the inner diameter of the bearing. Compared to bearing-specific nuts, special tools are not required and it is cheaper.
- Volume Discount
Standard Price: MYR 54.56- Days to Ship: 1 Day(s) or more -
Shaft Collar (Split) - Standard / Compact / Balanced
MISUMI
Compared to the standard type, it is up to 33% more compact in width and 16% more compact in outer diameter.
- Volume Discount
Standard Price: MYR 22.01- Days to Ship: 1 Day(s) or more -
Shaft Collar For Bearing Mounting (Space-Saving Design) - Set Screw / Compact, Set Screw
MISUMI
For holding the inner diameter of the bearing. Compared to bearing-specific nuts, special tools are not required and it is cheaper. Compared to the set screw type, it is up to 40% more compact in width (B dimension) and 19% more compact in outer diameter (D1 dimension).
- Volume Discount
Standard Price: MYR 23.03- Days to Ship: 2 Day(s) or more -
Shaft Collar (Clamp) - 2 Counterbored Holes / 3 Counterbored Holes
MISUMI
"Since the mounting hole is machined, this product can be mounted on plates and brackets."
- Volume Discount
Standard Price: MYR 60.62- Days to Ship: 2 Day(s) or more -
Shaft Collar - Standard with Urethane, Clamp Type / Standard with Urethane, Split Type
MISUMI
It is possible to avoid metallic noise caused by contact between metal parts.
- Volume Discount
Standard Price: MYR 49.71- Days to Ship: 1 Day(s) or more -
Standard Price: MYR 52.65- Days to Ship: 1 Day(s) or more -
Shaft Collar (2-Flats) - Standard Clamp / Cut Surface Mount Hole Clamp / Side Mount Hole Clamp
MISUMI
Cutting on two sides saves space. The mounting hole type allows for easy installation of the sensor bracket.
- Volume Discount
Standard Price: MYR 53.34- Days to Ship: 2 Day(s) or more -
Shaft Collar Compact with Clamp Lever - Side Mount Hole
MISUMI
Unitization with a clamp lever eliminates the need for tightening tools, making setup changes faster.
- Volume Discount
Standard Price: MYR 166.10- Days to Ship: 4 Day(s) or more -
Shaft Collar - Standard Type with Clamp Lever / Compact Type with Clamp Lever - Side Mount Hole
MISUMI
Unitization with a clamp lever eliminates the need for tightening tools, making setup changes quick.
- Volume Discount
Standard Price: MYR 180.96- Days to Ship: 4 Day(s) or more -
Shaft Collar (Threaded Bore) - Clamp Type
MISUMI
The Inner Dia. Part is thread-machined. Use this produce in combination with threaded shafts.
- Volume Discount
Standard Price: MYR 36.37- Days to Ship: 2 Day(s) or more -
Shaft Collar - DCut Standard / Compact (Space-Saving Design) - Clamp
MISUMI
The sensor bracket can be easily mounted using the mounting holes on the cut surface.
- Volume Discount
Standard Price: MYR 45.66- Days to Ship: 2 Day(s) or more -
Shaft Collar - DCut Standard / Compact (Space-Saving Design) - Split
MISUMI
The sensor bracket can be easily mounted using the mounting holes on the cut surface.
- Volume Discount
Standard Price: MYR 60.49- Days to Ship: 4 Day(s) or more -
Standard Price: MYR 101.30- Days to Ship: 7 Day(s) -
Wedge Collar With 3 Screw Holes and Clamp Lever
IWATA MFG
This wedge has a special shape that enables stopping with a small amount of force.
Standard Price: MYR 167.67- Days to Ship: 5 Day(s) or more -
Standard Price: MYR 11.86- Days to Ship: 5 Day(s) or more -
MISUMI
The sensor bracket can be easily installed using the mounting holes on the side.
- Volume Discount
Standard Price: MYR 81.23- Days to Ship: 2 Day(s) or more -
Shaft Collar (2-Flats) - Cut Surface Mount Hole Split
MISUMI
Cutting on two sides saves space. The mounting hole type allows for easy installation of the sensor bracket.
- Volume Discount
Standard Price: MYR 126.51- Days to Ship: 2 Day(s) or more -
Shaft Bracket, Normal Type, for Round Shaft
IWATA MFG
Due to the separate structure bracket, it can be retrofitted to a shaft. Useful for mounting sensors when machinery is already assembled, as well as during remodeling or maintenance projects.
- CAD ：
- 2D
Standard Price: MYR 45.81- Days to Ship: 5 Day(s) or more -
Shaft Bracket, With Flange, for Square Shafts
IWATA MFG
A separate bracket allows retrofitting to existing shafts. Convenient for sensor installation after machine assembly, during remodeling, maintenance, etc.
- CAD ：
- 2D
Standard Price: MYR 59.33- Days to Ship: 8 Day(s) or more -
Shaft Collar (Set Screw) - 2-Hole / 4-Hole / 2-Tapped (Coarse) / 4-Tapped (Coarse)
MISUMI
Since there are mounting holes, it can be attached to plates, brackets, etc.
- Volume Discount
Standard Price: MYR 15.76- Days to Ship: 1 Day(s) or more -
Shaft Collar - Standard Type with Clamp Lever - Clamp Type
MISUMI
Unitization with a clamp lever eliminates the need for tightening tools, making setup changes quick.
- Volume Discount
Standard Price: MYR 169.41- Days to Ship: 4 Day(s) or more -
Shaft Collar - Compact Type with Clamp Lever - D Cut
MISUMI
Unitization with a clamp lever eliminates the need for tightening tools, making setup changes quick.
- Volume Discount
Standard Price: MYR 190.87- Days to Ship: 2 Day(s) or more -
SUS (Stainless Steel) Shaft Collar
KONISHI
It is used for positioning of round shafts. Stainless steel. [Specifications]·Main Body: material: stainless steel SUS304, hex socket head set screw: material: stainless steel SUS304
- CAD ：
- 2D
Standard Price: MYR 13.51- Days to Ship: 4 Day(s) or more -
Standard Price: MYR 32.63- Days to Ship: 5 Day(s) or more -
Shaft Collar (Threaded Bore) - Set Screw Type
MISUMI
The Inner Dia. Part is thread-machined. Use this produce in combination with threaded shafts.
- Volume Discount
Standard Price: MYR 30.81- Days to Ship: 4 Day(s) or more -
Shaft Collar Threaded Inserts (Lightweight) - Plastic, Split
MISUMI
Resin is superior in weight reduction compared to iron and stainless steel. Contains a threaded insert to improve the mechanical strength of the threaded part. Separate type provides excellent workability.
- Volume Discount
Standard Price: MYR 63.92- Days to Ship: 4 Day(s) or more -
Shaft Collar Threaded Inserts (Lightweight) - Aluminum, Split
MISUMI
Aluminum is superior in weight reduction compared to iron and stainless steel. Contains a threaded insert to improve the mechanical strength of the threaded part.
- Volume Discount
Standard Price: MYR 56.10- Days to Ship: 2 Day(s) or more -
MISUMI
The sensor bracket can be easily installed using the mounting holes on the side.
- Volume Discount
Standard Price: MYR 53.34- Days to Ship: 4 Day(s) or more -
Shaft Bracket, 2 Screw Hole Type
IWATA MFG
Due to the separate structure bracket, it can be retrofitted to a shaft. Useful for mounting sensors when machinery is already assembled, as well as during remodeling or maintenance projects.
- CAD ：
- 2D
Standard Price: MYR 62.12- Days to Ship: 5 Day(s) or more -
IWATA MFG
High number of variations from top manufacturers
Standard Price: MYR 23.68- Days to Ship: 5 Day(s) or more -
Standard Split Collar for Steel Pipes
IWATA MFG
Abundant variations you can only get from a top manufacturer.
Standard Price: MYR 97.36- Days to Ship: 5 Day(s) or more -
Shaft Collar (Clamp) - 3-Hole / 3-Tapped (Coarse)
MISUMI
"Since the mounting hole is machined, this product can be mounted on plates and brackets."
- Volume Discount
Standard Price: MYR 43.64- Days to Ship: 2 Day(s) or more -
Shaft Collar (Split) - 2-Hole / 2-Tapped (Coarse)
MISUMI
[Features]·Retrofitting is possible and maintenance is easy. ·Standard thickness.
- Volume Discount
Standard Price: MYR 65.47- Days to Ship: 4 Day(s) or more -
Shaft Collar (Wedge) - 2-Hole / 2-Tapped (Coarse)
MISUMI
[Features]·This is a product with no restrictions on how to install it on a plate, etc.
- Volume Discount
Standard Price: MYR 59.96- Days to Ship: 2 Day(s) or more -
Shaft Collar - Compact with Urethane, Clamp Type / Compact with Urethane, Split Type
MISUMI
It is possible to avoid metallic noise caused by contact between metal parts.
- Volume Discount
Standard Price: MYR 103.05- Days to Ship: 2 Day(s) or more -
Shaft Collar Compact with Clamp Lever - Wedge - D Cut
MISUMI
Unitization with a clamp lever eliminates the need for tightening tools, making setup changes faster.
- Volume Discount
Standard Price: MYR 166.10- Days to Ship: 4 Day(s) or more -
![[Clean & Pack] Shaft Collar - Set Screw, Standard, Compact](//content.misumi-ec.com/image/upload/t_product_view_b/t_misumi_wm/v1/p/jp/product/series/110310634589/110310634589_001_20230911105917.jpg?$product_view_b$)
[Clean & Pack] Shaft Collar - Set Screw, Standard, Compact
MISUMI
Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.■Part Number for Clean & Pack Products·Degreasing (Anti-rust single packing) : Part Number SL-□□ ·Precision cleaning (Degassing double packing) : Part Number SH-□□ ·Electrolytic polishing + precision cleaning (Degassing double packing) : Part Number SHD-□□ Product Part Number Cleaning Method Packaging Type Effects Compared to Uncleaned Product Environment (Standard) Process SL-□□ Degreasing Anti-rust Packing Oil removal General environment Regular assembly process Post battery assembly process SH-□□ Precision cleaning Degassing double packing Oil removal
Dust removalClean environment (Class 10 to 1,000) Battery assembly process LCD-related post assembly process In-vehicle camera assembly process SHD-□□ Electrolytic polishing + precision cleaning Degassing double packing Oil removal
Dust removal
Outgas reductionVacuum environment
Clean environment (Class 10 to 1,000)Pre-semiconductor process Liquid crystal deposition process Pre-OLED process ■Notes
Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.- Volume Discount
Standard Price: MYR 30.00- Days to Ship: 6 Day(s) or more -
![[Clean & Pack]Shaft Collar Clamp - Threaded Insert, Aluminum Type](//my.misumi-ec.com/linked/material/mech/MSM1/PHOTO/110310984779_001.jpg?$product_view_b$)
[Clean & Pack]Shaft Collar Clamp - Threaded Insert, Aluminum Type
MISUMI
Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.■Part Number for Clean & Pack Products·Degreasing (Anti-rust single packing) : Part Number SL-□□ ·Precision cleaning (Degassing double packing) : Part Number SH-□□ ·Electrolytic polishing + precision cleaning (Degassing double packing) : Part Number SHD-□□ Product Part Number Cleaning Method Packaging Type Effects Compared to Uncleaned Product Environment (Standard) Process SL-□□ Degreasing Anti-rust Packing Oil removal General environment Regular assembly process Post battery assembly process SH-□□ Precision cleaning Degassing double packing Oil removal
Dust removalClean environment (Class 10 to 1,000) Battery assembly process LCD-related post assembly process In-vehicle camera assembly process SHD-□□ Electrolytic polishing + precision cleaning Degassing double packing Oil removal
Dust removal
Outgas reductionVacuum environment
Clean environment (Class 10 to 1,000)Pre-semiconductor process Liquid crystal deposition process Pre-OLED process ■Notes
Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.
Aluminum is superior in weight reduction compared to steel and stainless steel. With Threaded Inserts improves the mechanical strength of the threaded part.- Volume Discount
Standard Price: MYR 58.85- Days to Ship: 6 Day(s) or more -
![[Clean & Pack]Shaft Collar Split Type - Aluminum Type With Threaded Inserts](//my.misumi-ec.com/linked/material/mech/MSM1/PHOTO/110310984869_001.jpg?$product_view_b$)
[Clean & Pack]Shaft Collar Split Type - Aluminum Type With Threaded Inserts
MISUMI
Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.■Part Number for Clean & Pack Products·Degreasing (Anti-rust single packing) : Part Number SL-□□ ·Precision cleaning (Degassing double packing) : Part Number SH-□□ ·Electrolytic polishing + precision cleaning (Degassing double packing) : Part Number SHD-□□ Product Part Number Cleaning Method Packaging Type Effects Compared to Uncleaned Product Environment (Standard) Process SL-□□ Degreasing Anti-rust Packing Oil removal General environment Regular assembly process Post battery assembly process SH-□□ Precision cleaning Degassing double packing Oil removal
Dust removalClean environment (Class 10 to 1,000) Battery assembly process LCD-related post assembly process In-vehicle camera assembly process SHD-□□ Electrolytic polishing + precision cleaning Degassing double packing Oil removal
Dust removal
Outgas reductionVacuum environment
Clean environment (Class 10 to 1,000)Pre-semiconductor process Liquid crystal deposition process Pre-OLED process ■Notes
Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.
Aluminum is superior in weight reduction compared to steel and stainless steel. With Threaded Inserts improves the mechanical strength of the threaded part.- Volume Discount
Standard Price: MYR 69.12- Days to Ship: 6 Day(s) or more -
![[Clean & Pack]Shaft Collar - D Cut, Standard, Compact, Clamp](//my.misumi-ec.com/linked/material/mech/MSM1/PHOTO/110310984959_001.jpg?$product_view_b$)
[Clean & Pack]Shaft Collar - D Cut, Standard, Compact, Clamp
MISUMI
Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.■Part Number for Clean & Pack Products・Degreasing (Anti-rust single packing) : Part Number SL-□□ ・Precision cleaning (Degassing double packing) : Part Number SH-□□ ・Electrolytic polishing + precision cleaning (Degassing double packing) : Part Number SHD-□□ Product Part Number Cleaning Method Packaging Type Effects Compared to Uncleaned Product Environment (Standard) Process SL-□□ Degreasing Anti-rust Packing Oil removal General environment Regular assembly process Post battery assembly process SH-□□ Precision cleaning Degassing double packing Oil removal
Dust removalClean environment (Class 10 to 1,000) Battery assembly process LCD-related post assembly process In-vehicle camera assembly process SHD-□□ Electrolytic polishing + precision cleaning Degassing double packing Oil removal
Dust removal
Outgas reductionVacuum environment
Clean environment (Class 10 to 1,000)Pre-semiconductor process Liquid crystal deposition process Pre-OLED process ■Notes
Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.
Mounting holes on a flat side facilitate installation of sensor brackets.- Volume Discount
Standard Price: MYR 61.93- Days to Ship: 6 Day(s) or more -
KATAYAMA CHAIN
It can be securely attached to the positioning and fixing of stainless steel sprockets, timing belt pulleys, etc., with the ideal clamping effect. Includes 2 bolts.
Standard Price: MYR 51.97- Days to Ship: 5 Day(s) or more -
Shaft Bracket, Type With Flange, for Round Shaft
IWATA MFG
Due to the separate structure bracket, it can be retrofitted to a shaft. Useful for mounting sensors when machinery is already assembled, as well as during remodeling or maintenance projects.
- CAD ：
- 2D
Standard Price: MYR 53.76- Days to Ship: 5 Day(s) or more
![[Clean & Pack] Shaft Collar - Set Screw, Standard, Compact](http://content.misumi-ec.com/image/upload/t_product_view_b/t_misumi_wm/v1/p/jp/product/series/110310634589/110310634589_001_20230911105917.jpg?$product_view_b$)
![[Clean & Pack]Shaft Collar Clamp - Threaded Insert, Aluminum Type](http://my.misumi-ec.com/linked/material/mech/MSM1/PHOTO/110310984779_001.jpg?$product_view_b$)
![[Clean & Pack]Shaft Collar Split Type - Aluminum Type With Threaded Inserts](http://my.misumi-ec.com/linked/material/mech/MSM1/PHOTO/110310984869_001.jpg?$product_view_b$)
![[Clean & Pack]Shaft Collar - D Cut, Standard, Compact, Clamp](http://my.misumi-ec.com/linked/material/mech/MSM1/PHOTO/110310984959_001.jpg?$product_view_b$)
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Specifications |
| Fastening Method |
| Environmentally Friendly |
| Specifications |
| Properties / applications |
| I.D.(mm) |
| O.D.(mm) |
| Width(mm) |
| Material |
| Surface Treatment |
| Thickness |
| Side Milling |
| Cleaning Method |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | IWATA MFG | IWATA MFG | MISUMI | MISUMI | IWATA MFG | IWATA MFG | MISUMI | MISUMI | MISUMI | KONISHI | IWATA MFG | MISUMI | MISUMI | MISUMI | MISUMI | IWATA MFG | IWATA MFG | IWATA MFG | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | KATAYAMA CHAIN | IWATA MFG |
| Product Series | Shaft Collar For Bearing Mounting (Space-Saving Design) - Set Screw / Compact, Set Screw | Shaft Collar (Clamp) - 2 Counterbored Holes / 3 Counterbored Holes | Shaft Collar - Standard with Urethane, Clamp Type / Standard with Urethane, Split Type | Shaft Collar (2-Flats) - Standard Clamp / Cut Surface Mount Hole Clamp / Side Mount Hole Clamp | Shaft Collar - Standard Type with Clamp Lever / Compact Type with Clamp Lever - Side Mount Hole | Shaft Collar - DCut Standard / Compact (Space-Saving Design) - Clamp | Shaft Collar - DCut Standard / Compact (Space-Saving Design) - Split | Shaft Collar (Set Screw) - 2-Hole / 4-Hole / 2-Tapped (Coarse) / 4-Tapped (Coarse) | Shaft Collar Threaded Inserts (Lightweight) - Plastic, Split | Shaft Collar Threaded Inserts (Lightweight) - Aluminum, Split | Shaft Collar - Compact with Urethane, Clamp Type / Compact with Urethane, Split Type | [Clean & Pack]Shaft Collar Clamp - Threaded Insert, Aluminum Type | [Clean & Pack]Shaft Collar Split Type - Aluminum Type With Threaded Inserts | [Clean & Pack]Shaft Collar - D Cut, Standard, Compact, Clamp | |||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Days to Ship | 1 Day(s) or more | 1 Day(s) or more | 2 Day(s) or more | 1 Day(s) or more | 1 Day(s) or more | 2 Day(s) or more | 2 Day(s) or more | 1 Day(s) or more | 1 Day(s) or more | 2 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 2 Day(s) or more | 2 Day(s) or more | 4 Day(s) or more | 7 Day(s) | 5 Day(s) or more | 5 Day(s) or more | 2 Day(s) or more | 2 Day(s) or more | 5 Day(s) or more | 8 Day(s) or more | 1 Day(s) or more | 4 Day(s) or more | 2 Day(s) or more | 4 Day(s) or more | 5 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 2 Day(s) or more | 4 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 2 Day(s) or more | 4 Day(s) or more | 2 Day(s) or more | 2 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more |
| Specifications |
|
| |||||||||||||||||||||||||||||||||||||||||||
| Fastening Method | Slit | Set Screw | Slit | Slit | Split | Set Screw | Slit | Slit | Slit | Slit | Wedge | Slit | Slit | Slit | Split | Split | Wedge | Set Screw | Split | Split | Split | Split | Set Screw | Slit | Slit | Set Screw | Split | Set Screw | Split | Split | Slit | Split | Slit | Split | Slit | Split | Wedge | Split | Wedge | Set Screw | Slit | Split | Slit | Split | Split |
| Environmentally Friendly | RoHS compliant (10 substances) | - | RoHS compliant (10 substances) | - | RoHS compliant (10 substances) | - | - | - | - | - | - | - | - | - | RoHS compliant (10 substances) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Specifications | Standard | Standard | Side Mount Hole | For Bearing Mounting | Standard | For Bearing Mounting | Side Mount Hole | Urethane | Urethane | Side Mount Hole / 2-Flats | With Clamp Lever / Side Mount Hole | With Clamp Lever / Side Mount Hole | Threaded Bore | D Cut | D Cut | Urethane | With Clamp Lever / Side Mount Hole | Standard | Side Mount Hole | 2-Flats | Standard | Side Mount Hole | Side Mount Hole | With Clamp Lever | With Clamp Lever / D Cut | Standard | Standard | Threaded Bore | Standard | Standard | Side Mount Hole | Side Mount Hole | Standard | Standard | Side Mount Hole | Side Mount Hole | Side Mount Hole | Urethane | With Clamp Lever / D Cut | Standard | Standard | Standard | D Cut | Standard | Side Mount Hole |
| Properties / applications | Corrosion resistance / chemical resistance ～ Not Applicable | - | Corrosion resistance / chemical resistance | - | Corrosion resistance / chemical resistance ～ Not Applicable | Corrosion resistance / chemical resistance | - | - | - | - | - | - | - | Corrosion resistance / chemical resistance ～ Not Applicable | Corrosion resistance / chemical resistance ～ Not Applicable | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| I.D.(mm) | 3 ～ 50 | 3 ～ 50 | 6 ～ 50 | 3 ～ 50 | 3 ～ 60 | 3 ～ 40 | 6 ～ 50 | 3 ～ 50 | 6 ～ 35 | 6 ～ 40 | 10 ～ 30 | 6 ～ 30 | 3 ～ 30 | 8 ～ 50 | 8 ～ 50 | 15 ～ 25 | 10 ～ 50 | 3 ～ 60 | 8 ～ 30 | 10 ～ 30 | 10 ～ 50 | 10 ～ 50 | 3 ～ 50 | 6 ～ 30 | 6 ～ 30 | 4 ～ 50 | 3 ～ 85 | 3 ～ 30 | 8 ～ 30 | 8 ～ 30 | 8 ～ 30 | 10 ～ 50 | 3 ～ 60 | 10.5 ～ 48.6 | 6 ～ 50 | 6 ～ 50 | 10 ～ 50 | 6 ～ 30 | 10 ～ 30 | 3 ～ 50 | 8 ～ 30 | 8 ～ 30 | 8 ～ 30 | 5 ～ 50 | 10 ～ 50 |
| O.D.(mm) | 16 ～ 85 | 7 ～ 70 | 20 ～ 85 | 16 ～ 85 | 16 ～ 95 | 10 ～ 60 | 24 ～ 88 | 15 ～ 80 | 20 ～ 60 | 20 ～ 70 | 28 ～ 52 | 28 ～ 70 | 16 ～ 55 | 30 ～ 85 | 30 ～ 85 | 40 ～ 50 | 35 ～ 85 | 7 ～ 88 | 22 ～ 55 | 30 ～ 55 | 39 ～ 86 | 34.5 ～ 83 | 18 ～ 86 | 35 ～ 70 | 28 ～ 70 | 12 ～ 79 | 15 ～ 135 | 7 ～ 46 | 25 ～ 55 | 25 ～ 55 | 22 ～ 55 | 39 ～ 86 | 15 ～ 95 | 35 ～ 85 | 20 ～ 85 | 20 ～ 85 | 25 ～ 78 | 20 ～ 55 | 28 ～ 52 | 7 ～ 70 | 25 ～ 55 | 25 ～ 55 | 30 ～ 55 | 20 ～ 85 | 34.5 ～ 83 |
| Width(mm) | 6 ～ 22 | 5 ～ 25 | 8 ～ 30 | 9 ～ 26 | 6 ～ 22 | 6 ～ 21 | 8 ～ 22 | 10 ～ 23 | 10 ～ 20 | 8 ～ 18 | 14 | 12 ～ 18 | 8 ～ 15 | 8 ～ 22 | 8 ～ 22 | 18 ～ 20 | - | 5 ～ 28 | 6 ～ 15 | 10 ～ 15 | - | - | 6 ～ 25 | 18 | 12 ～ 18 | 8 ～ 25 | 8 ～ 32 | 6 ～ 15 | 8 ～ 15 | 8 ～ 15 | 6 ～ 15 | - | 8 ～ 22 | - | 8 ～ 22 | 8 ～ 22 | 10 ～ 15 | 10 ～ 20 | 14 | 5 ～ 25 | 8 ～ 15 | 8 ～ 15 | 8 ～ 15 | 10 ～ 22 | - |
| Material | Stainless Steel / Aluminum | Stainless Steel / Aluminum | Stainless Steel | Stainless Steel | Stainless Steel / Aluminum | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel / Aluminum | Stainless Steel / Aluminum | Stainless Steel | Stainless Steel | Stainless Steel / Aluminum / Plastic | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel / Aluminum | Stainless Steel | Plastic | Aluminum | Stainless Steel | Stainless Steel | Stainless Steel / Aluminum / Plastic | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Aluminum | Aluminum | Aluminum | Stainless Steel | Stainless Steel |
| Surface Treatment | No Surface Treatment | No Surface Treatment | No Surface Treatment | No Surface Treatment | No Surface Treatment | No Surface Treatment | No Surface Treatment | No Surface Treatment | No Surface Treatment | No Surface Treatment | No Surface Treatment | No Surface Treatment | No Surface Treatment | No Surface Treatment | No Surface Treatment | No Surface Treatment | No Surface Treatment | No Surface Treatment | No Surface Treatment | No Surface Treatment | No Surface Treatment | No Surface Treatment | No Surface Treatment | No Surface Treatment | No Surface Treatment | No Surface Treatment | No Surface Treatment | No Surface Treatment | No Surface Treatment | No Surface Treatment | No Surface Treatment | No Surface Treatment | No Surface Treatment | No Surface Treatment | No Surface Treatment | No Surface Treatment | No Surface Treatment | No Surface Treatment | No Surface Treatment | No Surface Treatment | No Surface Treatment | No Surface Treatment | No Surface Treatment | No Surface Treatment | No Surface Treatment |
| Thickness | Standard Type / Compact Type | Standard Type / Compact Type / Wide Type | Standard Type | Standard Type / Compact Type | Standard Type / Compact Type / Balanced Type | Standard Type / Compact Type | Standard Type | Standard Type / Compact Type | Standard Type / Compact Type | Standard Type | Compact Type | Standard Type / Compact Type | Standard Type | Standard Type / Compact Type | Standard Type / Compact Type | Standard Type | Standard Type | Standard Type | Standard Type / Compact Type | Standard Type | Standard Type | Standard Type | Standard Type | Standard Type | Standard Type / Compact Type | Standard Type | Standard Type | Standard Type | Standard Type | Standard Type | Standard Type / Compact Type | Standard Type | Standard Type | Standard Type | Standard Type | Standard Type | Standard Type | Standard Type / Compact Type | Compact Type | Standard Type / Compact Type | Standard Type | Standard Type | Standard Type / Compact Type | Standard Type | Standard Type |
| Side Milling | Not Provided | Not Provided | 2-Hole / 2-Tapped | Not Provided | Not Provided | Not Provided | 2 Counterbored Holes / 3 Counterbored Holes | Not Provided | Not Provided | Not Provided / 2-Tapped | 2-Tapped | 2-Tapped | Not Provided | Not Provided | Not Provided | Not Provided | 3-Hole | Not Provided | 2-Tapped | Not Provided | Not Provided | 4-Tapped | 2-Hole / 4-Hole / 2-Tapped / 4-Tapped | Not Provided | Not Provided | - | Not Provided | Not Provided | Not Provided | Not Provided | 2-Tapped | 2-Tapped | Not Provided | Not Provided | 3-Hole / 3-Tapped | 2-Hole / 2-Tapped | 2-Hole / 2-Tapped | Not Provided | Not Provided | - | Not Provided | Not Provided | Not Provided | Not Provided | 4-Tapped |
| Cleaning Method | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Degreasing / Precision Cleaning / Electrolytic polishing + precision cleaning | Degreasing / Precision Cleaning | Degreasing / Precision Cleaning | Degreasing / Precision Cleaning | - | - |
![[Clean & Pack] Shaft Collar - Set Screw, Standard, Compact](http://content.misumi-ec.com/image/upload/t_product_view_c/t_misumi_wm/v1/p/jp/product/series/110310634589/110310634589_001_20230911105917.jpg?$product_view_c$)
![[Clean & Pack]Shaft Collar Clamp - Threaded Insert, Aluminum Type](http://my.misumi-ec.com/linked/material/mech/MSM1/PHOTO/110310984779_001.jpg?$product_view_c$)
![[Clean & Pack]Shaft Collar Split Type - Aluminum Type With Threaded Inserts](http://my.misumi-ec.com/linked/material/mech/MSM1/PHOTO/110310984869_001.jpg?$product_view_c$)
![[Clean & Pack]Shaft Collar - D Cut, Standard, Compact, Clamp](http://my.misumi-ec.com/linked/material/mech/MSM1/PHOTO/110310984959_001.jpg?$product_view_c$)
Loading...
Configure
Specification/Dimensions
-
Environmentally Friendly
-
Specifications
-
Standard -
With Clamp Lever -
For Bearing Mounting -
Urethane -
Side Mount Hole -
D Cut -
2-Flats -
Threaded Bore -
Key Relief Groove
-
-
Properties / applications
-
I.D.(mm)
-
O.D.(mm)
- 6
- 7
- 8
- 10
- 11
- 12
- 13
- 14
- 15
- 16
- 17
- 17.2
- 18
- 18.7
- 19
- 20
- 21.7
- 22
- 23
- 24
- 24.2
- 25
- 26
- 27
- 28
- 29
- 29.2
- 30
- 31
- 32
- 33
- 33.2
- 34
- 34.5
- 35
- 35.5
- 36
- 38
- 39
- 40
- 40.2
- 41
- 42
- 44
- 45
- 46
- 46.2
- 47
- 48
- 49
- 50
- 51
- 51.5
- 52
- 52.2
- 53
- 54
- 55
- 56
- 57
- 58
- 59
- 60
- 62
- 63
- 64
- 65
- 65.4
- 66.5
- 68
- 69
- 70
- 72
- 75
- 78
- 79
- 79.5
- 80
- 81
- 83
- 85
- 86
- 88
- 90
- 94
- 95
- 105
- 110
- 113
- 115
- 119
- 126
- 130
- 135
- 140
- 150
- 170
- 180
-
Width(mm)
-
Material
- Steel
- Stainless Steel
- Aluminum
- Plastic
-
Surface Treatment
- No Surface Treatment
- Surface Treatment
-
Thickness
-
Side Milling
-
Cleaning Method
- Degreasing
- Precision Cleaning
- Electrolytic polishing + precision cleaning
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
Days to Ship
-
- All
- 1 Day(s) or Less
- 2 Day(s) or Less
- 4 Day(s) or Less
- 5 Day(s) or Less
- 6 Day(s) or Less
- 7 Day(s) or Less
- 8 Day(s) or Less
- 9 Day(s) or Less
- 10 Day(s) or Less
- 11 Day(s) or Less
Related Categories to Shaft Collars
-
- Linear Shafts
- Shaft Supports
- Shaft Collars
- Linear Bushings
- Ball Guides
- Spline Shaft
- Oil Free Bushings, Washers
- Linear Motor Actuators
- Oil Free Plates, Guide Rails
- Linear Guides
- Cable Carriers
- Ball Screw
- Support Units
- Lead Screws, Slide Screws
- Cross Roller
- Slide Packs, V Guides, Linear Rails
- Actuators/Single Axis Robot
- Other Linear Motion Related Components
- Bellows
-
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy