(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
YANASE Wheels with Shafts（Application：Polishing）
| Days to Ship |
|
|---|
-
YANASE
Prevents overcutting of the workpiece and fits better to rounded surfaces.
[Features]
· Fits snugly due to the mushroom shape.
· Heat dissipation effects are achieved by making an overlapping layer of Unilon non-woven fabric of the same size.
· Further, since the Unilon fibers are compressed closer to the head, the strength is higher than the lower part.
· Tangled Unilon fibers act as a cushion, preventing over-grinding of the materials being abraded.
· Fits better to rounded surfaces.Standard Price: MYR 313.09- Days to Ship: 8 Day(s) or more -
Flap Wheel With Shaft UF【1-10 Pieces Per Package】
YANASE
High-quality standard products that come in a vast variety of sizes and grain sizes.
[Features]
· A wide range of sizes and particle sizes with high quality.
· Because of the slight gap between polishing cloths, it is unlikely to clog and can be used for uniform polishing throughout.
· It is elastic, so that it fits nicely onto the workpiece for close polishing.
· It is not exothermic and does not alter the polished material.
· Fits well to workpiece.
· Boasts significant autogenous action.Standard Price: MYR 29.10- Days to Ship: 4 Day(s) or more -
NANO-FLAP (Sandpaper) With Shank Diameter 3 mm【1-5 Pieces Per Package】
YANASE
There is no clogging due to the ultra-thin mesh structure, allowing for uniform processing.
[Features]
· High grade precision work.
· Nano-flap is a flap made with flexible sandpaper using ultra fine mesh base fabric.
· There is little clogging due to the ultra-thin mesh structure, allowing for uniform processing and a long service life.Standard Price: MYR 84.70- Days to Ship: 4 Day(s) or more -
YANASE
A product which can polish both bottom and side surfaces at the same time.
[Features]
· The tip (bottom) can also be used for added convenience.
· Polishing cloth extends further than the shaft so the bottom and sides can be used for 2 surface simultaneous polishing.
· Unlikely to clog, allowing a uniform finish to be achieved throughout.
· It is elastic, easy to fit to the workpiece.
· Due to heat dissipation, it does not alter the polished material.
· Excellent autogenous properties.
· Ideal for polishing flat surfaces, bottom surfaces and cornersStandard Price: MYR 36.52- Days to Ship: 8 Day(s) or more -
YANASE
[Features]
· Flap wheel that is easy to use and does not scratch the workpiece easily, since both sides are cap-less and metal fittings are not used.
· Tough abrasive cloth is used to achieve both grinding power and durability.
· The paper is flexible and resilient, for a tight fit with the workpiece when grinding.
· Deburring of metals and rust-removal.
· For general metal surface grinding, such as flat surfaces, curved surfaces and inner surfaces.
· Suitable for grinding in narrow parts that are difficult to reach with the tips of the flaps.Standard Price: MYR 26.80- Days to Ship: 9 Day(s) or more -
Mounted Wheel With Unilon (Hard) NH【1-10 Pieces Per Package】
YANASE
Ideal for removal of scratches and rust. Can also be used for hairline finishing.
[Features]
· Selectable from abundant granularity and sizes.
· It removes burrs without scraping, with no secondary burrs.
· As it is soft, elastic and has good adaptability, it prevents fatigue.Standard Price: MYR 26.48- Days to Ship: 8 Day(s) or more -
YANASE
Prevents over-scraping, and produces a uniform finished surface with no clogging.
[Features]
· Unilon's standard product.
· Because the Unilon fibers are specially coated with abrasive, the intertwined fibers play the role of cushioning and prevent excessive grinding.
· Its autogenous properties prevent clogging.
· Polishes without scratching.
· Finishes the surface without scraping the material.
· Flexible and fits perfectly to the curved surfaces.Standard Price: MYR 54.15- Days to Ship: 8 Day(s) or more -
YANASE
Use alundum for general polishing and zirconia for heavy polishing such as bead polishing, etc. after welding.
Standard Price: MYR 5.60- Days to Ship: 4 Day(s) or more -
YANASE
Since the holder part is a sponge, the contact is soft, and prevents excessive grinding.
[Features]
· Attachment when using a cushioning cone.
· Superb elasticity with the dedicated sponge.Standard Price: MYR 65.74 Days to Ship: 34 Day(s) -
Toppo With Single-Action Shaft, for Polishing【1-10 Pieces Per Package】
YANASE
[Features]
· This is the product you always wanted.
· The centrifugal force caused by rotation increases the diameter, making it ideal for inner surface polishing.
· Capable of heavy polishing with a soft touch.
· It is a retractable type, providing a large polishing area and beautiful finished surface.
· One-touch shaft attachmentStandard Price: MYR 13.50- Days to Ship: 5 Day(s) or more -
YANASE
[Features]
· Smaller core increases the usable margin.
· The 6 mm shaft adopts a stepped shaft.
· Block specification of paper provides reinforced resilience and increases product life and grinding power.
· An affordable five-pack.Standard Price: MYR 33.90- Days to Ship: 8 Day(s) -
YANASE
[Features]
· Collet chuck type, for φ3/φ6.
· Easily usable in places where work is difficult or processes which have poor work efficiency in conventional factories, leading to improved production.
· Compared to heavy electric tools and pneumatic tools, it is lighter, easier to use, and greatly reduces fatigue.Standard Price: MYR 1,008.30 Days to Ship: 18 Day(s) -
YANASE
[Features]
· A drill chuck type that can be used with up to φ8.
· Easily usable in places where work is difficult or processes which have poor work efficiency in conventional factories, leading to improved production.
· Compared to heavy electric tools and pneumatic tools, it is lighter, easier to use, and greatly reduces fatigue.Standard Price: MYR 542.80 Days to Ship: 9 Day(s) -
Standard Price: MYR 74.15- Days to Ship: 8 Day(s) -
Unilon Purple Wheel【10 Pieces Per Package】
YANASE
[Features]
· Polishes the surface alone without overcutting the workpiece.
· No clogging, and superior polishing power.
· Effective for base treatment before painting and features excellent coating adhesion.Standard Price: MYR 584.94 Days to Ship: 45 Day(s) or more -
Unilon Wheel MIX Set with Shaft
YANASE
[Features]
· Finishes the surface without overcutting the workpiece.
· Flexible and fits perfectly to the curved surfaces.
· Tangled Unilon fibers prevent over-grinding and help prevent clogging due to the autogenous properties.Standard Price: MYR 220.78 Days to Ship: 37 Day(s) -
YANASE
[Features]
· The centrifugal force caused by rotation increases the diameter, making it ideal for inner surface polishing.
· Capable of heavy polishing with a soft touch.
· It is a retractable type, providing a large polishing area and beautiful finished surface.Standard Price: MYR 42.87- Days to Ship: 5 Day(s) -
Flap Wheels with Shaft【1-10 Pieces Per Package】
YANASE
[Features]
· Because of the slight gap between polishing cloths, it is unlikely to clog and can be used for uniform polishing throughout.
· It is elastic, so that it fits nicely onto the workpiece for close polishing.
· It is not exothermic and does not alter the polished material.
· Fits well to workpiece.
· Boasts significant autogenous action.Standard Price: MYR 24.10- Days to Ship: 4 Day(s) or more -
Flap wheel with diamond shaft ALL type
YANASE
[Features]
· Ideal for polishing of surfaces, inner surfaces, and curved surfaces of difficult-to-cut materials.
· It is elastic, easy to fit to the workpiece and therefore improving workability. The diamond cloth is processed into flap shape, realizing maximum elasticity.
· φ1 dot electrodeposition.
· Diamond abrasive grains are hard, providing much higher grindability than single stage abrasive grains (GC, C abrasive grains).
[Applications]
· For grinding ceramics and carbide.Standard Price: MYR 146.72 Days to Ship: 11 Day(s) -
Flap wheel with diamond shaft MIX type
YANASE
[Features]
· Ideal for polishing of surfaces, inner surfaces, and curved surfaces of difficult-to-cut materials.
· It is elastic, easy to fit to the workpiece and therefore improving workability. The diamond cloth is processed into flap shape, realizing maximum elasticity.
· φ1 dot electrodeposition.
· Diamond abrasive grains are hard, providing much higher grindability than single stage abrasive grains (GC, C abrasive grains).
[Applications]
· For grinding ceramics and carbide.Standard Price: MYR 136.21- Days to Ship: 47 Day(s) or more -
Cartridge Roll with Shaft, Straight Type
YANASE
[Features]
· Autogenous action enables continuous grinding with new abrasive surfaces constantly formed.
· Ideal for polishing and deburring detailed parts.Standard Price: MYR 23.73- Days to Ship: 22 Day(s) or more -
YANASE
[Features]
· The core has been made smaller to wield longer usable flap length.
· The 6‑mm shaft model features a stepped shaft.
· The papers are block types, giving springiness, a longer life and improved grinding performance.Standard Price: MYR 34.93 Days to Ship: 29 Day(s)
| Brand |
|---|
| Product Series |
| Days to Ship |
| Material |
| Type |
| Application |
| Particle Size(#) |
| Outer Diameter(mm) |
| Shaft Diameter(mm) |
| Width(mm) |
| Stationary Diameter(mm) |
| Screw Hole Diameter(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | YANASE | YANASE | YANASE | YANASE | YANASE | YANASE | YANASE | YANASE | YANASE | YANASE | YANASE | YANASE | YANASE | YANASE | YANASE | YANASE | YANASE | YANASE | YANASE | YANASE | YANASE | YANASE |
| Product Series | NANO-FLAP (Sandpaper) With Shank Diameter 3 mm【1-5 Pieces Per Package】 | Mounted Wheel With Unilon (Hard) NH【1-10 Pieces Per Package】 | Toppo With Single-Action Shaft, for Polishing【1-10 Pieces Per Package】 | |||||||||||||||||||
| Days to Ship | 8 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 8 Day(s) or more | 9 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 4 Day(s) or more | 34 Day(s) | 5 Day(s) or more | 8 Day(s) | 18 Day(s) | 9 Day(s) | 8 Day(s) | 45 Day(s) or more | 37 Day(s) | 5 Day(s) | 4 Day(s) or more | 11 Day(s) | 47 Day(s) or more | 22 Day(s) or more | 29 Day(s) |
| Material | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Type | Flap with shaft | Flap with shaft | Flap with shaft | Flap with shaft | Flap with shaft | Flap with shaft | Flap with shaft | Paper | Holder | Flap with shaft | Flap with shaft | - | - | Flap with shaft | Paper | Flap with shaft | Flap with shaft | Flap with shaft | Flap with shaft | Flap with shaft | Flap with shaft | Flap with shaft |
| Application | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing |
| Particle Size(#) | 150 ～ 600 | 40 ～ 600 | 800 ～ 3000 | 40 ～ 400 | 60 ～ 240 | 120 ～ 1500 | 120 ～ 600 | 60 ～ 400 | - | 60 ～ 240 | 60 ～ 120 | - | - | 120 ～ 600 | - | 120 ～ 600 | 60 ～ 240 | 40 ～ 600 | 100 | 60 ～ 600 | 60 ～ 400 | 40 |
| Outer Diameter(mm) | 50 ～ 90 | 10 ～ 30 | 10 ～ 20 | 10 ～ 60 | 25 ～ 80 | 10 ～ 25 | 50 ～ 100 | - | Tip diameter ø14; Large end diameter φ20 | 10 ～ 50 | 10 ～ 30 | - | - | 50 ～ 70 | 100 | 50 | 38 | 10 ～ 125 | 15 | 15 ～ 50 | 15 ～ 25 | 15 |
| Shaft Diameter(mm) | 6 | 3 | 3 | 3 ～ 6 | 6 | 3 ～ 6 | 6 | - | 6 | - | 3 ～ 6 | - | - | 6 | - | 6 | 6 | 3 ～ 6 | 3 | 3 ～ 6 | 6 | 3 |
| Width(mm) | 30 ～ 50 | 5 ～ 20 | 10 | 20 ～ 40 | 25 | 5 ～ 25 | 25 | - | 50 | 10 ～ 25 | 10 ～ 25 | - | - | 30 | 13 | 25 | 25 | 10 ～ 30 | 10 | 10 ～ 20 | 25 ～ 40 | 15 |
| Stationary Diameter(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 30 | - | - | - | - | - |
| Screw Hole Diameter(mm) | - | - | - | - | - | - | - | - | - | 3 ～ 6 | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Material
- Cotton
- Sisal
- Flannel
- Buff
- Felt
-
Type
- Flap with shaft
- Band
- Drum
- Paper
- Holder
- Holder (Drum)
-
Application
- Polishing
- Polishing
-
Particle Size(#)
-
Outer Diameter(mm)
-
Shaft Diameter(mm)
-
Width(mm)
-
Stationary Diameter(mm)
-
Screw Hole Diameter(mm)
Narrow search by specifying Manufacturer
-
- MISUMI (5)
- ICHIGUCHI (30)
- NAKANISHI (28)
- TRUSCO NAKAYAMA (23)
- YANASE (22)
- MINITOR (8)
- NIHONNSEIMITU (6)
- KURODA BRUSH (4)
- MURAKO (4)
- OFFICE MINE (3)
- DREMEL (2)
- SUNPOWER (2)
- NEW_REGISTON (1)
- SUMFLEX (1)
- UHT (1)
- PFERD (0)
CAD
-
- 2D
- 3D
Related Categories to Wheels with Shafts
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy