(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
YAMAWA MFG Screw-Hole-Related Tools（Screw size (Nominal)：M42）
Search by specifying the lower class category
Hand Taps
Spiral Taps
Point Taps
Roll Taps
Taps for Pipes
Thread Cutters
Thread-Cutting-Related Tools
Dies
| Days to Ship |
|
|---|
-
YAMAWA MFG
Hand tap used for general tapping work.
[Features]
・ High blade tip strength makes it easy for regrinding.
・ More suitable for manual work compared to taps of other shapes.
・ 2 types are available, with 5P or 1.5P chamfered threads.
・ When machining a blind hole manually, finish machining with 1.5P is recommended after first machining with 5P.
・ Machining with mechanical machinery is also possible.
・ Has straight grooves out of consideration for cutting chip stow.
・ Suitable for work materials whose cutting chips are powder or small coiled close to the powder.
[Applications]
・ Ideal for threading SPC/SPH and other thin plates or SS400/S20 or below mild steel.Standard Price: MYR 2,118.87- Days to Ship: 8 Day(s) or more -
YAMAWA MFG
A point tap convenient for through-hole machining as scraps are ejected forward.
[Features]
· Slanting the groove on the cutting edge of the biting part pushes the scraps forward.
· Minimal scrap issues.
· Low cutting torque.
· Capable of machining both synchronously and asynchronously.
[Applications]
· Ideal for machining through-holes.
* N-PO models will transition to PO as soon as stock runs out.Standard Price: MYR 4,186.82- Days to Ship: 8 Day(s) or more -
YAMAWA MFG
It is suitable for threading for simple installation used for thin steel plates such as SPC and SPH and mild steel of SS400, S20 or less.
Standard Price: MYR 4,934.48- Days to Ship: 8 Day(s) or more -
Short Spiral Fluted Taps, Deep Hole Use_S-SP
YAMAWA MFG
Spiral tap with short thread length effective for deep screw tapping of 2.5 times nominal diameter or more.
[Features]
· Low frictional resistance and good supply of cutting oil are effective for deep thread machining to 2.5 times the nominal diameter or more.
· Oxide treatment (OX treatment) applied to prevent welding.
[Applications]
· Optimal for deep thread machining to 2.5 times the nominal diameter or more.Standard Price: MYR 2,478.98 Days to Ship: 7 Day(s) or more -
YAMAWA MFG
[Features]
· A common tap that's used in various applications.Standard Price: MYR 2,029.34 Days to Ship: 9 Day(s) -
Solid Die D for Metric Threads
YAMAWA MFG
Solid die with improved die runout precision.
[Features]
· High-speed tool steel (HSS) is adopted, realizing stable machining.
· The front surface is the surface with a marking on the chamfering.
· The machining reference surface at the rear is set so that the end face makes close contact when the holder is attached.
· Screw adjustments are not required and die outer diameter precision is improved compared to adjustable dies as this is a solid die.
· Solves problems particular to adjustable type dies, realizing high precision screw machining.
[Applications]
· Convenient for cutting male threads on various work materials, whether hand turned or used with machinery.
· Combining with NC tooling enables machining with a MC.Standard Price: MYR 4,942.01- Days to Ship: 8 Day(s) or more -
Spiral Fluted Taps for Stainless Steels_SU+SP
YAMAWA MFG
Spiral tap for blind hole machining with extremely viscous or work-hardened work material.
[Features]
· For blind hole machining with extremely viscous or work-hardened work materials such as chrome steel, molybdenum steel, and stainless steel.
· Optimal design of the screw part reduces the machining burden on each blade bite, reducing the cutting resistance and increasing tool life.
· Stable scrap is ejected and a good finish is realized.
· Capable of machining both synchronously and asynchronously.
· Machining speed of 10 m/min or less is recommended.
[Applications]
Optimal for machining extremely viscous or work-hardened work material.Standard Price: MYR 2,592.41- Days to Ship: 7 Day(s) or more -
Spiral Pointed Taps for Stainless Steels_SU+PO
YAMAWA MFG
Point tap for through-hole machining with extremely viscous or work-hardened work material.
[Features]
Optimal blade design is suitable for machining chrome steel, molybdenum steel, and stainless steel.
· Capable of machining both synchronously and asynchronously.
· Machining speed of 10 m/min or less is recommended.
[Applications]
· Ideal for machining through-holes with chrome steel, molybdenum steel, and stainless steel.Standard Price: MYR 2,527.60 Days to Ship: 7 Day(s) or more -
YAMAWA MFG
The spiral flute tap is ideal for machining blind holes as cutting chip is discharged from the grooves twisted in the same direction as the threads.
[Features]
・ The grooves are twisted in the same direction as the threads for not only good scrap discharging performance but also great cutting performance.
・ Intermittent cutting of female threads with keyway is also possible.
・ Capable of machining both synchronously and asynchronously.
・ Ideal for machining blind holds as the groove is twisted, continuous small coiled scraps are discharged to the rear, and it does not cause cutting chip clogging.
・ Ideal for tapping especially sticky work materials, plastics, etc. due to its sharpness.
・ The tap can easily cut.
・ Intermittent cutting of pilot holes with keyway is also possible.
・ Since the blade strength is inferior to HT, the HT shape is more suitable for hard materials.
[Applications]
・ Ideal for machining blind holes.Standard Price: MYR 4,186.82 Days to Ship: 8 Day(s) -
Spiral Pointed Taps, Oxidized_PO-OX
YAMAWA MFG
Point taps with oxide treatment (OX).
[Features]
· The film produced by oxide treatment becomes an oil reservoir (oil pocket) for machining oil, reducing frictional resistance.
· This prevents parts welding together and improves the finished surface roughness of the female thread.
· Oxide treatment is also effective for removing residual stress from the tap, extending the life span.
[Applications]
· Ideal for machining easily welded materials such as stainless steel or low carbon steel.Standard Price: MYR 5,211.47 Days to Ship: 9 Day(s) -
Short Spiral Pointed Taps for Deep Hole Use_S-PO
YAMAWA MFG
A tap with short thread length effective for deep screw tapping of 2.5 times nominal diameter or more.
[Features]
· Short thread length gives low frictional resistance.
· Good supply of cutting oil is effective for deep thread machining to 2.5 times the nominal diameter or more.
· Oxide treatment (OX treatment) applied to prevent welding.
[Applications]
· Optimal for deep thread machining to 2.5 times the nominal diameter or more.Standard Price: MYR 4,150.80 Days to Ship: 8 Day(s)
| Brand |
|---|
| Product Series |
| Days to Ship |
| Screw size (Nominal) |
| Screw Types |
| work material |
| Pitch (P), Number of Threading(mm) |
| Tool Material Type |
| Tap Type |
| Hole type |
| Chamfer threads (Lcf) |
| Coating Type |
| Coating Y/N |
| Overall Length (L)(mm) |
|
|
|
|
|
|
|
|
|
|
| |
| Brand | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG |
| Product Series | |||||||||||
| Days to Ship | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 7 Day(s) or more | 9 Day(s) | 8 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 8 Day(s) | 9 Day(s) | 8 Day(s) |
| Screw size (Nominal) | M42 | M42 | M42 | M42 | M42 | M42 | M42 | M42 | M42 | M42 | M42 |
| Screw Types | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter |
| work material | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | - | High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Steel casting (SC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] |
| Pitch (P), Number of Threading(mm) | 1.5 ～ 4.5 | 1.5 ～ 4.5 | 1.5 ～ 4.5 | 4.5 | 4.5 | 1 ～ 4.5 | 1.5 ～ 4.5 | 4.5 | 1.5 ～ 4.5 | 4.5 | 4.5 |
| Tool Material Type | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel |
| Tap Type | Hand Tap | Point tap | Hand Tap | Spiral Tap | Hand Tap | Die | Spiral Tap | Point tap | Spiral Tap | Point tap | Point tap |
| Hole type | For through hole / For blind hole | For through hole | For through hole / For blind hole | For blind hole | For through hole / For blind hole | - | For blind hole | For through hole | For blind hole | For through hole | For through hole |
| Chamfer threads (Lcf) | 1.5P ～ 5P | 5P | 1.5P ～ 5P | 2.5P | 1.5P ～ 5P | - | 2.5P | 5P | 2.5P | 5P | 5P |
| Coating Type | - | - | - | - | - | - | - | - | - | - | - |
| Coating Y/N | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA |
| Overall Length (L)(mm) | 175 | 175 | 250 ～ 300 | 175 | 175 | - | 175 | 175 | 175 | 175 | 175 |
Loading...
Configure
Specification/Dimensions
-
Screw size (Nominal)
- CTG-54
- CTG-42
- CTG-36
- CTG-28
- CTG-22
- CTG-16
- No.0
- No.0UN
- NO.0-80UNF
- NO.10
- No.10
- No.1
- No.1UN
- No.10UN
- No.10UNF
- S0.1
- NO.1-72UNF
- NO.1-64UNC
- NO.10-32UNF
- No.10-32UNF
- NO.10-24UNC
- No.10-24UNC
- No.12
- No.12UN
- NO.12-28UNF
- No.12-28UNF
- NO.12-24UNC
- No.12-24UNC
- No.2
- No.2UN
- S0.2
- NO.2-64UNF
- No.2-64UNF
- NO.2-56UNC
- No.2-56UNC
- No.3
- No.3UN
- S0.3
- NO.3-56UNF
- No.3-56UNF
- NO.3-48UNC
- No.3-48UNC
- NO.4
- No.4
- No.4UN
- S0.4
- NO.4-48UNF
- No.4-48UNF
- NO.4-40UNC
- No.4-40UNC
- No.5
- No.5UN
- S0.5
- NO.5-44UNF
- No.5-44UNF
- NO.5-40UNC
- No.5-40UNC
- 0.6
- No.6
- No.6UN
- S0.6
- NO.6-40UNF
- No.6-32UNC
- 0.7
- S0.7
- 0.8
- No.8
- No.8UN
- S0.8
- NO.8-36UNF
- No.8-36UNF
- NO.8-32UNC
- No.8-32UNC
- 0.9
- S0.9
- 1
- 1UN
- 1UNS
- G1
- M1
- NPS1
- NPT1
- NPTF1
- PF1
- PF 1
- PS 1
- PT1
- PT 1
- R1
- Rp1
- S1
- UNC1
- UNF1
- W1
- 1'-11.5
- 1'-11
- 1-8UNC
- 1 1/2
- 1"1/2UN
- G1"1/2
- NPS1"1/2
- NPT1"1/2
- PS 1 1/2
- PT 1 1/2
- R1"1/2
- Rp1"1/2
- W1"1/2
- 1'1/2-11.5
- 1'1/2-11
- 1 1/2-8UN
- 1 1/4
- 1"1/4UN
- G1"1/4
- NPS1"1/4
- NPT1"1/4
- PS 1 1/4
- PT 1 1/4
- R1"1/4
- Rp1"1/4
- W1"1/4
- 1'1/4-11.5
- 1'1/4-11
- 1 1/4-8UN
- 1 1/8
- 1"1/8UN
- G1"1/8
- R1"1/8
- W1"1/8
- 1'1/8-11
- 1 1/8-8UN
- 1"1/16UN
- 1/2
- 1/2PF
- 1/2UN
- 1/2W
- G1/2
- NPS1/2
- NPT1/2
- NPTF1/2
- PF 1/2
- PS 1/2
- PT 1/2
- R1/2
- Rc1/2
- Rp1/2
- UNC1/2
- UNF1/2
- W1/2
- 1/2-20UNF
- 1/2-14
- 1/2-13UNC
- 1/2W12
- 1 3/4
- 1"3/4UN
- G1"3/4
- R1"3/4
- Rp1"3/4
- W1"3/4
- 1'3/4-11
- 1 3/4-8UN
- 1 3/8
- 1"3/8UN
- G1"3/8
- R1"3/8
- W1"3/8
- 1 3/8-8UN
- 1/4
- 1/4UN
- 1/4UNF
- 1/4W
- G1/4
- NPS1/4
- NPT1/4
- NPTF1/4
- PF1/4
- PF 1/4
- PT 1/4
- R1/4
- Rc1/4
- Rp1/4
- SM1/4
- UNC1/4
- UNF1/4
- W1/4
- 1/4-28UNF
- 1/4-20UNC
- 1/4-19
- 1/4-18
- 1/4W20
- 1 5/8
- W1"5/8
- 1 5/8-8UN
- M1 to 6
- M1～6
- W1"7/8
- 1 7/8-8UN
- 1 7/16
- 1 8
- 1'W8
- 1/8
- 1/8PT
- G1/8
- NPS1/8
- NPT1/8
- NPTF1/8
- PF1/8
- PF 1/8
- PS1/8
- PS 1/8
- PT 1/8
- R1/8
- Rc1/8
- Rp1/8
- SM1/8
- W1/8
- 1/8-28
- 1/8-27
- 1/8-18
- 1 9/16
- M1 to 10
- 1'11.5
- 1 12
- 1 14
- 1/16
- G1/16
- NPT1/16
- R1/16
- Rp1/16
- 1/16-28
- 1/16-27
- 1 20
- M1.1
- M1.2
- S1.2
- 1.25
- 1.29
- 1.37
- M1.4
- S1.4
- 1.45
- 1.5
- M1.6
- M1.7
- M1.8
- 2
- 2UN
- G2
- M2
- M2.0
- NPS2
- NPT2
- PT 2
- R2
- Rp2
- W2
- 2'-11.5
- 2'-11
- 2-8UN
- 2 1/2
- G2"1/2
- R2"1/2
- Rp2"1/2
- 2'1/2-11
- 2'1/2-8
- W2"1/4
- 2'1/4-11
- 2 4.5
- M2 to 4.5
- 2 12
- M2.2
- M2.3
- M2.5
- M2.6
- 3
- 3M
- G3
- M3
- M3.0
- R3
- Rp3
- STI M3
- 3'-11
- 3'-8
- 3 1/2
- G3"1/2
- R3"1/2
- Rp3"1/2
- 3'1/2-11
- 3/4
- 3/4UN
- G3/4
- NPS3/4
- NPT3/4
- NPTF3/4
- PF 3/4
- PS 3/4
- PT 3/4
- R3/4
- Rp3/4
- UNC3/4
- UNF3/4
- W3/4
- 3/4-16UNF
- 3/4-14
- 3/4-10UNC
- 3/4W10
- 3/8
- 3/8UN
- 3/8UNF
- 3/8W
- G3/8
- NPS3/8
- NPT3/8
- NPTF3/8
- PF3/8
- PF 3/8
- PS3/8
- PT3/8
- PT 3/8
- R3/8
- Rc3/8
- Rp3/8
- UNC3/8
- UNF3/8
- W3/8
- 3/8-24UNF
- 3/8-19
- 3/8-18
- 3/8-16UNC
- 3/8W16
- M3 to 10
- 3/16
- SM3/16
- W3/16
- 3/32
- SM3/32
- 3.5
- M3.5
- M3.5
- 4
- 4M
- G4
- M4
- M4.0
- R4
- Rp4
- STI M4
- 4'-11
- M4 to 6
- M4 to 13
- M4.5
- M4.5
- 5
- 5M
- M5
- M5.0
- STI M5
- 5/1
- 5/8
- 5/8UN
- G5/8
- NPS5/8
- R5/8
- UNC5/8
- UNF5/8
- W5/8
- 5/8-18UNF
- 5/8-14
- 5/8-11UNC
- 5/8W11
- M5 to 10
- M5 to 13
- 5/16
- 5/16UN
- 5/16UNF
- 5/16W
- UNC5/16
- UNF5/16
- W5/16
- 5/16-24UNF
- 5/16-18UNC
- 5/16W18
- 5/32
- W5/32
- 5/64
- M5.5
- M5.5
- 6
- M6
- M6.0
- STI M6
- No6-40UNF
- M6 to 20
- M7
- M7
- PG7
- 7/8
- 7/8UN
- G7/8
- NPS7/8
- R7/8
- UNC7/8
- UNF7/8
- W7/8
- 7/8-14
- 7/8-14UNF
- 7/8-9UNC
- 7/8W9
- 7/16
- 7/16UN
- UNC7/16
- UNF7/16
- W7/16
- 7/16-20UNF
- 7/16-14UNC
- 7/16W14
- 7/32
- SM7/32
- 7.5
- 8
- M8
- STI M8
- 9
- M9
- M9
- PG9
- 9/16
- 9/16UN
- UNF9/16
- W9/16
- 9/16-18UNF
- 9/16-12UNC
- SM9/32
- 9/64
- SM9/64
- 10
- M10
- M10.0
- STI M10
- Tr 10
- M10 to 13
- M10 to 25
- 11
- M11
- M11
- PG11
- 11/16
- SM11/32
- 11/64
- SM11/64
- 12
- M12
- M12.0
- STI M12
- Tr 12
- 13
- M13
- PG13.5
- M14
- M14.0
- M14
- Tr 14
- 15
- M15
- 15/64
- SM15/64
- 16
- M16
- M16.0
- M16
- PG16
- Tr 16
- 17
- M17
- M18
- M18
- Tr 18
- 19
- M19
- M19 to 32
- M19 to 38
- 20
- M20
- M20
- Tr 20
- M21
- PG21
- 22
- M22
- M22
- M22X
- Tr 22
- M23
- M24
- M24
- M24X
- Tr 24
- 25
- M25
- M25X
- Tr 25
- M25 to 50
- M25 to 70
- M26
- Tr 26
- M27
- 28
- M28
- Tr 28
- PG29
- M30
- Tr 30
- 31
- 31/32
- M32
- M33
- M34
- M35
- 36
- M36
- PG36
- M37
- M38
- 39
- M39
- M40
- 42
- M42
- PG42
- M44
- M45
- M46
- M48
- M50
- M52
- M56
- 1015
- 1020N100M
- 1020N150M
- 06510X28R
- 10154
- 12204
- 12254N100M
- 12254N150M
- 12254N200M
- 16304N100M
- 16304N150M
- 16304N200M
- 16304N250M
- 20305
- 20505N100M
- 20505N150M
- 20505N200M
- 20505N300M
- 20505N350M
- 25506N100M
- 25506N150M
- 25506N200M
- 25506N300M
- 25506N350M
- 32506
- 32506N150M
- 32506N200M
- 32506N300M
- 035083N075M
- 035083N080M
- 040123N100M
- 060163N050M
- 060163N100M
- 060163N125M
- 065103X28G
- 075203N125M
- 075203N150M
- 080153X19G
- 080153X19R
- 080203N050M
- 080203N100M
- 090244N125M
- 090244N175M
- 100254N050M
- 100254N100M
- 100254N150M
- 100254N200M
- 120204X14G
- 120204X14R
- 120304N100M
- 120304N150M
- 120304N200M
- 160264X11G
- 160264X11R
- 160404N150M
- 160404N200M
- 160404N250M
- 200305X11G
- 200305X11R
- 200505N150M
- 200505N200M
- 200505N300M
-
Screw Types
- Meter
- unified
- Whitworth
- Sewing Machine
- Taper for Pipe
- Parallel for Pipes
- Trapezoid
- Miniature
- Other
-
work material
- Low-Carbon Steel (carbon alloy less than 0.25%)
- Medium carbon steel (carbon content 0.25 to 0.45%)
- High Carbon Steel (C with a content over 0.45%)
- Alloy Steel (SCM)
- Stainless steel (SUS)
- Quenched and tempered steel (25 to 35 HRC)
- Quenched and tempered steel (35 to 45 HRC)
- Quenched and tempered steel (45 to 55 HRC)
- High Hardness Steel (50-60 HRC)
- Tool Steel (Before SKD Hardening)
- Steel casting (SC)
- Cast Iron (FC)
- Ductile Cast Iron (FCD)
- Copper (Cu)
- Brass (Bs)
- Brass cast iron (BsC)
- Bronze (Pb)
- Aluminum Rolled Material (AL)
- Aluminum Alloy Casting (AC, ADC)
- Magnesium Alloy (MC)
- Zinc Alloy Casting (ZDC)
- Titanium Alloy (Ti-6Al-4V, etc)
- Nickel-based alloy (Inconel, etc.)
- Thermosetting plastic (bakelite, phenol, etc.)
- Thermoplastic plastic (vinyl chloride, nylon, etc.)
-
Pitch (P), Number of Threading(mm)
- .02
- 0.025
- 0.05
- 0.08
- 0.1
- 0.125
- 0.15
- 0.175
- 0.2
- 0.225
- 0.25
- 0.3
- 0.35
- 0.4
- 0.45
- 0.5
- 0.529
- 0.6
- 0.63
- 0.7
- 0.75
- 0.75、1.00、1.25、1.50、1.75、2.00、2.50、3.00
- 0.79
- 0.794
- 0.8
- 0.9
- 0.907
- 0.974
- 1
- 1.058
- 1.25
- 1.27
- 1.5
- 1.75
- 2
- 2.5
- 3
- 3.5
- 4
- 4.5
- 5
- 5.5
- 6
- 7
- 8
- 9
- 10
- 10、11、12、14、16、18、20、24F
- 11
- 11 1/2
- 11.5
- 12
- 13
- 14
- 16
- 18
- 19
- 20
- 24
- 26
- 27
- 28
- 30
- 32
- 36
- 40
- 44
- 48
- 56
- 64
- 72
- 80
- 100
-
Tool Material Type
-
Tap Type
-
Hole type
-
Chamfer threads (Lcf)
-
Coating Type
-
Coating Y/N
-
Overall Length (L)(mm)
Narrow search by specifying Manufacturer
-
- MISUMI (0)
- OSG (12)
- YAMAWA MFG (11)
- SKC (1)
- NS TOOL (0)
- H & H (0)
- KO-KEN TOOL (0)
- MITSUTOMO (0)
- NEW STRONG (0)
- TRUSCO NAKAYAMA (0)
- NIIGATASEIKI (0)
- TSUBOSAN (0)
- TANOI MFG (0)
- TOP (0)
- HOZAN (0)
- ONISHI (0)
- ENGINEER (0)
- UNION TOOL (0)
- RUKO (0)
- ISHIHASHI (0)
- EIKOSHA (0)
- RENNSTEIG (0)
- ESCO (0)
- DOY FURNITURE (0)
- LIGHTSEIKI (0)
- GUHRING (0)
- SANDVIK (0)
- NACHI (0)
CAD
-
- 2D
- 3D
Related Categories to Screw-Hole-Related Tools
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy