(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
YAMAWA MFG Screw-Hole-Related Tools（Hole type：For blind hole Page2）
Search by specifying the lower class category
Hand Taps
Spiral Taps
Point Taps
Roll Taps
Taps for Pipes
Thread Cutters
Thread-Cutting-Related Tools
Dies
| Days to Ship |
|
|---|
-
Long Shank Hand Taps for American Dryseal Taper Pipe Threads_LS-NPTF
YAMAWA MFG
■ The LS-NPTF is a long shank hand tap for theAmerican dry seal tapered pipe threads andis used for products whose main purpose isto withstand screw threads in connection withparts for pipes.
Standard Price: MYR 749.52- Days to Ship: 8 Day(s) -
Hand Taps for American Taper Pipe Threads, Short (ℓg) Type_S-NPT
YAMAWA MFG
■ The S-NPT is a hand tap for the Americantapered pipe threads and is used for tappingwhere it is necessary to shorten the fittinglength for piping parts. Its main purpose istightness of threaded parts in connection withpipe parts etc.
Standard Price: MYR 304.49- Days to Ship: 8 Day(s) or more -
Long Shank Spiral Fluted Taps for American Taper Pipe Threads, Short (ℓg) Type_LS-SP-S-NPT
YAMAWA MFG
■ The SP-NPT is a long shank spiral flute tap forthe American tapered pipe threads where it isnecessary to shorten the fitting length and isused for products whose main purpose is thetightness of threaded parts in connection withpipe parts etc.
Standard Price: MYR 790.54- Days to Ship: 8 Day(s) or more -
Spiral Fluted Taps for American Taper Pipe Threads_SP-NPT
YAMAWA MFG
■ The SP-NPT is a spiral flute tap for the Americantapered pipe threads and is used for productswhose main purpose is the tightness of threadedparts in connection with pipe parts etc.
Standard Price: MYR 447.04- Days to Ship: 8 Day(s) or more -
Long Shank Hand Taps for American Taper Pipe Threads_LS-NPT
YAMAWA MFG
■ The LS-NPT is a long shank tap for the Americantapered pipe threads and is used for productswhose main purpose is the tightness of threadedparts in connection with pipe parts etc.
Standard Price: MYR 650.47- Days to Ship: 8 Day(s) or more -
Hand Taps for American Dryseal Parallel Pipe Threads_NPSF
YAMAWA MFG
■ The NPSF is a hand tap for the American dryseal parallel pipe threads and is used for screwtapping of products whose main purpose is thetightness of threaded parts in connection withpipe parts etc.
Standard Price: MYR 366.07- Days to Ship: 8 Day(s) or more -
Spiral Fluted Taps for Aluminum_AL+SP
YAMAWA MFG
A tap that enables high speed, stable machining of light alloys such as aluminum die casting or forged aluminum.
[Features]
· Optimal blade design limits the internal diameter burrs that tend to appear when cutting threads into light alloy.
· Stable, clean thread machining can be performed.
[Applications]
· Stable thread machining of light alloy such as aluminum die casting or forged aluminum at high speed.
· Can be used not only with aluminum, but also other materials such as brass, bronze, magnesium castings, and zinc alloy castings.Standard Price: MYR 44.71- Days to Ship: 6 Day(s) or more -
Hand Taps with Short Chamfer for Magnesium Alloy Castings_MG-HT
YAMAWA MFG
There is less than 1 chamfer thread, making it ideal for blind holes without any spare depth in the pilot hole.
Standard Price: MYR 91.63- Days to Ship: 8 Day(s) or more -
Spiral Fluted Taps for Stainless Steels, Deep Hole Use_SU-S-SP
YAMAWA MFG
[Features]
· For blind hole processing in materials with high hardening properties and extreme viscosity such as stainless steel, chrome steel and molybdenum steel.Standard Price: MYR 67.78- Days to Ship: 5 Day(s) or more -
Spiral Fluted Taps for Stainless Steels_SU+SP【1-81 Pieces Per Package】
YAMAWA MFG
Spiral tap for blind hole machining with extremely viscous or work-hardened work material.
[Features]
· For blind hole machining with extremely viscous or work-hardened work materials such as chrome steel, molybdenum steel, and stainless steel.
· Optimal design of the screw part reduces the machining burden on each blade bite, reducing the cutting resistance and increasing tool life.
· Stable scrap is ejected and a good finish is realized.
· Capable of machining both synchronously and asynchronously.
· Machining speed of 10 m/min or less is recommended.
[Applications]
Optimal for machining extremely viscous or work-hardened work material.Standard Price: MYR 43.08- Days to Ship: 1 Day(s) or more -
Spiral Fluted Taps_SP【1-99 Pieces Per Package】
YAMAWA MFG
The spiral flute tap is ideal for machining blind holes as cutting chip is discharged from the grooves twisted in the same direction as the threads.
[Features]
・ The grooves are twisted in the same direction as the threads for not only good scrap discharging performance but also great cutting performance.
・ Intermittent cutting of female threads with keyway is also possible.
・ Capable of machining both synchronously and asynchronously.
・ Ideal for machining blind holds as the groove is twisted, continuous small coiled scraps are discharged to the rear, and it does not cause cutting chip clogging.
・ Ideal for tapping especially sticky work materials, plastics, etc. due to its sharpness.
・ The tap can easily cut.
・ Intermittent cutting of pilot holes with keyway is also possible.
・ Since the blade strength is inferior to HT, the HT shape is more suitable for hard materials.
[Applications]
・ Ideal for machining blind holes.Standard Price: MYR 43.40- Days to Ship: 1 Day(s) or more -
Spiral Fluted Taps, Oxidized_SP-OX【1-79 Pieces Per Package】
YAMAWA MFG
Spiral taps with oxide treatment (OX).
[Features]
· The film produced by oxide treatment becomes an oil reservoir (oil pocket) for machining oil.
· The oil pocket acts to reduce the frictional resistance, preventing parts welding together, and improves the finished surface roughness of the female thread.
· Oxide treatment also removes residual stress from the tap, extending the life span.
[Applications]
· Ideal for machining easily welded materials such as stainless steel or low carbon steel.Standard Price: MYR 65.60- Days to Ship: 8 Day(s) or more -
Spiral Fluted Taps for Titanium Alloys_ZET-B【1-104 Pieces Per Package】
YAMAWA MFG
A tap for processing high strength, lightweight, and heat-resistant titanium alloys, where the main component is titanium.
Standard Price: MYR 82.45- Days to Ship: 7 Day(s) or more -
Spiral Fluted Taps for Nickel Base Alloys_ZEN-B【1-107 Pieces Per Package】
YAMAWA MFG
A type for machining nickel-base alloys, made from a nickel principal component for corrosion and heat resistance that is significantly superior to that of steel.
Standard Price: MYR 82.45- Days to Ship: 7 Day(s) or more -
Plus Series Spiral Fluted Taps,Optimum Coating for the Tapping_AU+SP
YAMAWA MFG
Coated spiral tap that can machine at medium to high speed for a wide range of work materials.
[Features]
· A special shape (BLF shape) is adopted for the thread component. Several threads are totally left untouched while the remaining half of the threads are chamfered.
· Completely threaded to prevent the blade from chipping.
· Reduction of friction resistance and tapping torque.
· Maintains screw guidance (stable machining).
· Maintains excellent chip discharge performance (smooth discharge).
[Applications]
· Supports machining of a wide range of work materials such as alloy steel, high carbon steel, medium carbon steel, low carbon steel, etc.
· Ideal for water soluble cutting fluids.Standard Price: MYR 101.28- Days to Ship: 5 Day(s) or more -
Standard Price: MYR 280.38- Days to Ship: 8 Day(s) or more -
YAMAWA MFG
Using the effectiveness of a spiral groove with weak torsion, chips are divided and ejected smoothly. Excellent for threading and lateral processing of tempering materials such as high carbon steel and alloy tool steel.
Days to Ship: 8 Day(s) or more -
Long Shank Spiral Fluted Taps_LS-SP
YAMAWA MFG
* LS-N-SP will switch to LS-SP as soon as the stock runs out.
Standard Price: MYR 107.05- Days to Ship: 5 Day(s) or more -
Long Shank Spiral Fluted Taps for Left Hand Threads_LS-SP-LH
YAMAWA MFG
* LS-N-SP will switch to LS-SP(LH) as soon as the stock runs out.
Standard Price: MYR 485.67- Days to Ship: 8 Day(s) or more -
Long Shank Spiral Fluted Taps, Coated_LS-SP-V
YAMAWA MFG
* LS-N-SP-V will switch to LS-SP-V as soon as the stock runs out.
Standard Price: MYR 134.87- Days to Ship: 7 Day(s) or more -
Long Shank Hand Taps, Coated_LS-HT-V
YAMAWA MFG
■ Long shank coated hand taps for tappingthreads in deep holes that cannot be reachedwith a standard overall length.
Standard Price: MYR 299.24- Days to Ship: 8 Day(s) or more -
Long Shank Hand Taps for Left Hand Threads_LS-HT-LH
YAMAWA MFG
■ Long shank hand taps for tapping left-handthreads in deep holes that cannot be reachedwith a standard overall length.
Standard Price: MYR 223.75- Days to Ship: 8 Day(s) or more -
Long Shank Low Spiral Fluted Taps_LS-LO-SP
YAMAWA MFG
Using the effectiveness of a spiral groove with weak torsion, chips are divided and ejected smoothly. Excellent for threading and lateral processing of tempering materials such as high carbon steel and alloy tool steel.
Standard Price: MYR 220.89- Days to Ship: 8 Day(s) or more -
Hand Taps for Taper Pipe Threads Short (ℓg) Type, for Stainless Steels_SU-S-PT
YAMAWA MFG
It is a tap suitable for processing threads made of stainless steel, chrome steel, and chrome molybdenum steel.
Standard Price: MYR 272.73- Days to Ship: 8 Day(s) or more -
Spiral Fluted Taps for Taper Pipe Threads Short (ℓg) Type_SP-S-PT
YAMAWA MFG
A cutting tap used for screw tapping in connecting pipes and pipe parts where the main purpose is mechanical connection. Can be used for machining tapered threads requiring durability such as water pipes and gas pipes
Standard Price: MYR 190.53- Days to Ship: 7 Day(s) or more -
LS-S-PT, Long Shank Hand Taps for Taper Pipe Threads, Short (ℓg) Type: TSPT06-L10/20
YAMAWA MFG
A cutting tap used for screw tapping in connecting pipes and pipe parts where the main purpose is mechanical connection. Can be used for machining tapered threads requiring durability such as water pipes and gas pipes
Standard Price: MYR 612.92- Days to Ship: 8 Day(s) or more -
Long Shank Spiral Fluted Taps for Taper Pipe Threads, Short (ℓg) Type_LS-SP-S-PT
YAMAWA MFG
■ The LS-SP-S-PT is a spiral flute long shanktapered pipe tap and is used for tapping whereit is necessary to shorten the fitting length witha product whose main purpose is the tightnessof the threaded portion in connection with pipeparts etc.
Standard Price: MYR 615.08- Days to Ship: 8 Day(s) or more -
LS-S-PT, Long Shank Hand Taps for Taper Pipe Threads, Short (ℓg) Type: TSPT02KL10/TSPT04-L10
YAMAWA MFG
A cutting tap used for screw tapping in connecting pipes and pipe parts where the main purpose is mechanical connection. Can be used for machining tapered threads requiring durability such as water pipes and gas pipes
Standard Price: MYR 325.04- Days to Ship: 8 Day(s) or more -
Hand Taps for Taper Pipe Threads, Short (ℓg) Type, for Cast Irons_FC-S-PT
YAMAWA MFG
A tap suitable for thread machining of hard and brittle material such as cast iron.
Standard Price: MYR 224.83- Days to Ship: 8 Day(s) or more -
Carbide Taps for Taper Pipe Threads, Short (ℓg) Type, for Cast Irons_CT-S-PT
YAMAWA MFG
With a short male thread and female thread fitting length, this is a carbide hand tap for cast iron tapered pipe threads with a short thread shape, suitable for mass-production machining of hard and brittle materials such as cast iron. [Features]·Chamfer 2.5P; straight groove hand tap shape.
Standard Price: MYR 1,665.87- Days to Ship: 6 Day(s) or more -
Hand Taps for Taper Pipe Threads Long (ℓg) Type, for Low Carbon Steels_LC-S-PT
YAMAWA MFG
Suitable for threading mild steel (low-carbon steel) such as SS400, S25C.
Standard Price: MYR 260.60- Days to Ship: 8 Day(s) -
Hand Taps for Taper Pipe Threads Long (ℓg) Type, for Stainless Steels_SU-PT
YAMAWA MFG
It is a tap suitable for processing threads made of stainless steel, chrome steel, and chrome molybdenum steel.
Standard Price: MYR 272.73- Days to Ship: 8 Day(s) or more -
Long Shank Spiral Fluted Taps for Taper Pipe Threads, Long (ℓg) Type_LS-SP-PT
YAMAWA MFG
■ The LS-SP-PT is a spiral flute long shanktapered pipe tap and is used for products whosemain purpose is the tightness of threaded partsin connection with pipe parts, etc.
Standard Price: MYR 658.35- Days to Ship: 8 Day(s) or more -
Long Shank Hand Taps for Taper Pipe Threads Long (ℓg) Type_LS-PT
YAMAWA MFG
For standard pipe taps, it is used when the protruding length of the screw is insufficient.
Standard Price: MYR 300.39- Days to Ship: 7 Day(s) or more -
Hand Taps for Taper Pipe Threads Long (ℓg) Type, for Low Carbon Steels_LC-PT
YAMAWA MFG
Suitable for threading mild steel (low-carbon steel) such as SS400, S25C.
Standard Price: MYR 260.60- Days to Ship: 8 Day(s) or more -
Hand Taps for Parallel Pipe Threads_G
YAMAWA MFG
The parallel thread type is used for machining parallel threads used for ordinary mechanical connection when connecting pipes and piping parts.
Standard Price: MYR 121.69- Days to Ship: 9 Day(s) -
Hand Taps for Parallel Pipe Threads_PF
YAMAWA MFG
The parallel thread type is used for machining parallel threads used for ordinary mechanical connection when connecting pipes and piping parts.
Standard Price: MYR 126.09- Days to Ship: 8 Day(s) or more -
Hand Taps for Parallel Pipe Threads_PS
YAMAWA MFG
The parallel thread type is used for machining parallel threads used for ordinary mechanical connection when connecting pipes and piping parts.
Standard Price: MYR 119.37- Days to Ship: 8 Day(s) or more -
Hand Taps for Parallel Pipe Threads, for Stainless Steels_SU-PF
YAMAWA MFG
It is a tap suitable for processing threads made of stainless steel, chrome steel, and chrome molybdenum steel.
Standard Price: MYR 223.13- Days to Ship: 8 Day(s) or more -
Spiral Fluted Taps for Parallel Pipe Threads_SP-PF
YAMAWA MFG
The parallel thread type is used for machining parallel threads used for ordinary mechanical connection when connecting pipes and piping parts.
Standard Price: MYR 149.19- Days to Ship: 8 Day(s) or more -
Spiral Fluted Taps for Parallel Pipe Threads_SP-PS
YAMAWA MFG
The parallel thread type is used for machining parallel threads used for ordinary mechanical connection when connecting pipes and piping parts.
Standard Price: MYR 149.19- Days to Ship: 8 Day(s) or more -
Long Shank Hand Taps for Parallel Pipe Threads_LS-PF
YAMAWA MFG
The parallel thread type is used for machining parallel threads used for ordinary mechanical connection when connecting pipes and piping parts.
Standard Price: MYR 250.95- Days to Ship: 8 Day(s) or more -
Long Shank Hand Taps for Parallel Pipe Threads_LS-PS
YAMAWA MFG
The parallel thread type is used for machining parallel threads used for ordinary mechanical connection when connecting pipes and piping parts.
Standard Price: MYR 250.95- Days to Ship: 8 Day(s) or more -
Long Shank Spiral Fluted Taps for Parallel Pipe Threads_LS-SP-PF
YAMAWA MFG
■ The LS-SP-PF is a long shank spiral flutetap for parallel pipe threads and is used fortapping of products whose main purpose is toconnect mechanical parts such as pipe parts.The PF internal thread is used for fitting withthe PF external thread.
Standard Price: MYR 382.76- Days to Ship: 8 Day(s) or more -
Long Shank Spiral Fluted Taps for Parallel Pipe Threads_LS-SP-PS
YAMAWA MFG
■ The LS-SP-PS is a long shank spiral flutetap for parallel pipe threads and is used forproducts whose main purpose is the tightnessof the threaded portion in connection with pipeparts etc. The PS internal thread is used forfitting with PT external thread.
Standard Price: MYR 513.17- Days to Ship: 8 Day(s) or more
| Brand |
|---|
| Product Series |
| Days to Ship |
| Screw size (Nominal) |
| Screw Types |
| work material |
| Pitch (P), Number of Threading(mm) |
| Tool Material Type |
| Tap Type |
| Hole type |
| Chamfer threads (Lcf) |
| Coating Type |
| Coating Y/N |
| Overall Length (L)(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG |
| Product Series | Long Shank Hand Taps for American Dryseal Taper Pipe Threads_LS-NPTF | Hand Taps for American Taper Pipe Threads, Short (ℓg) Type_S-NPT | Long Shank Spiral Fluted Taps for American Taper Pipe Threads, Short (ℓg) Type_LS-SP-S-NPT | Hand Taps with Short Chamfer for Magnesium Alloy Castings_MG-HT | Spiral Fluted Taps for Stainless Steels, Deep Hole Use_SU-S-SP | Spiral Fluted Taps for Stainless Steels_SU+SP【1-81 Pieces Per Package】 | Spiral Fluted Taps for Titanium Alloys_ZET-B【1-104 Pieces Per Package】 | Spiral Fluted Taps for Nickel Base Alloys_ZEN-B【1-107 Pieces Per Package】 | Plus Series Spiral Fluted Taps,Optimum Coating for the Tapping_AU+SP | Long Shank Spiral Fluted Taps for Left Hand Threads_LS-SP-LH | Hand Taps for Taper Pipe Threads Short (ℓg) Type, for Stainless Steels_SU-S-PT | Spiral Fluted Taps for Taper Pipe Threads Short (ℓg) Type_SP-S-PT | LS-S-PT, Long Shank Hand Taps for Taper Pipe Threads, Short (ℓg) Type: TSPT06-L10/20 | Long Shank Spiral Fluted Taps for Taper Pipe Threads, Short (ℓg) Type_LS-SP-S-PT | LS-S-PT, Long Shank Hand Taps for Taper Pipe Threads, Short (ℓg) Type: TSPT02KL10/TSPT04-L10 | Hand Taps for Taper Pipe Threads, Short (ℓg) Type, for Cast Irons_FC-S-PT | Carbide Taps for Taper Pipe Threads, Short (ℓg) Type, for Cast Irons_CT-S-PT | Hand Taps for Taper Pipe Threads Long (ℓg) Type, for Low Carbon Steels_LC-S-PT | Hand Taps for Taper Pipe Threads Long (ℓg) Type, for Stainless Steels_SU-PT | Long Shank Spiral Fluted Taps for Taper Pipe Threads, Long (ℓg) Type_LS-SP-PT | Long Shank Hand Taps for Taper Pipe Threads Long (ℓg) Type_LS-PT | Hand Taps for Taper Pipe Threads Long (ℓg) Type, for Low Carbon Steels_LC-PT | Hand Taps for Parallel Pipe Threads, for Stainless Steels_SU-PF | Long Shank Spiral Fluted Taps for Parallel Pipe Threads_LS-SP-PF | Long Shank Spiral Fluted Taps for Parallel Pipe Threads_LS-SP-PS | ||||||||||||||||||||
| Days to Ship | 8 Day(s) | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 6 Day(s) or more | 8 Day(s) or more | 5 Day(s) or more | 1 Day(s) or more | 1 Day(s) or more | 8 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 5 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 5 Day(s) or more | 8 Day(s) or more | 7 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 7 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 6 Day(s) or more | 8 Day(s) | 8 Day(s) or more | 8 Day(s) or more | 7 Day(s) or more | 8 Day(s) or more | 9 Day(s) | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more |
| Screw size (Nominal) | 1 ～ 3/8 | 1'-11.5 ～ 3/8-18 | 1/2-14 ～ 3/8-18 | 1'-11.5 ～ 3/8-18 | 1 ～ 3/8 | 1'-11.5 ～ 3/8-18 | M2 ～ M24 | M1.4 ～ M3 | M3 ～ M20 | No.10 ～ M45 | No.10 ～ M48 | No.10 ～ M30 | M3 ～ M20 | M3 ～ M20 | M2 ～ M12 | S0.6 ～ S0.9 | M3 ～ M12 | 1 ～ M36 | M8 ～ M16 | M3 ～ M12 | M8 ～ M12 | M8 ～ M30 | M8 ～ M24 | 1'-11 ～ 3/4-14 | 1'-11 ～ 3/8-19 | 1'-11 ～ 3/8-19 | 1'-11 ～ 3/8-19 | 1/4-19 ～ 1/8-28 | 1'-11 ～ 3/4-14 | 1/2-14 ～ 3/8-19 | 1'-11 ～ 3/4-14 | 1'-11 ～ 3/4-14 | 1'-11 ～ 3/8-19 | 1 ～ 3/8 | 1'-11 ～ 3/4-14 | 1'-11 ～ 3/4-14 | 1 ～ 7/8 | 1 ～ 7/8 | 1'-11 ～ 3/4-14 | 1'-11 ～ 3/4-14 | 1'-11 ～ 3/4-14 | 1 ～ 3/8 | 1 ～ 3/4 | 1'-11 ～ 3/8-19 | 1 ～ 3/8 |
| Screw Types | Taper for Pipe | Taper for Pipe | Taper for Pipe | Taper for Pipe | Taper for Pipe | Taper for Pipe | Meter | Meter | Meter | Meter / unified / Whitworth | Meter / unified / Whitworth / Sewing Machine | Meter / unified / Whitworth | Meter | Meter | Meter | Miniature | Meter | Meter / unified / Whitworth | Meter | Meter | Meter | Meter | Meter | Taper for Pipe | Taper for Pipe | Taper for Pipe | Taper for Pipe | Taper for Pipe | Taper for Pipe | Taper for Pipe | Taper for Pipe | Taper for Pipe | Taper for Pipe | Taper for Pipe | Taper for Pipe | Parallel for Pipes | Parallel for Pipes | Parallel for Pipes | Parallel for Pipes | Parallel for Pipes | Parallel for Pipes | Parallel for Pipes | Parallel for Pipes | Parallel for Pipes | Parallel for Pipes |
| work material | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Brass cast iron (BsC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass cast iron (BsC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Zinc Alloy Casting (ZDC)[○] / Nickel-based alloy (Inconel, etc.)[○] | Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] | High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] | High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Nickel-based alloy (Inconel, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | - | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Stainless steel (SUS)[○] / Steel casting (SC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Brass cast iron (BsC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Brass cast iron (BsC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Brass cast iron (BsC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] | Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Steel casting (SC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Stainless steel (SUS)[○] / Steel casting (SC)[○] | - | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Steel casting (SC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Stainless steel (SUS)[○] / Steel casting (SC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] |
| Pitch (P), Number of Threading(mm) | 11.5 ～ 27 | - | - | - | 11.5 ～ 27 | - | 0.4 ～ 3 | 0.3 ～ 0.5 | 0.5 ～ 2.5 | 0.3 ～ 56 | 0.25 ～ 100 | 0.3 ～ 56 | 0.5 ～ 2.5 | 0.5 ～ 2.5 | 0.4 ～ 1.75 | 0.15 ～ 0.225 | 0.5 ～ 1.75 | 1 ～ 24 | 1.25 ～ 2 | 0.5 ～ 1.75 | 1.25 ～ 1.75 | 1.25 ～ 3.5 | 1.25 ～ 3 | - | - | - | - | - | - | - | - | - | - | 11 ～ 28 | - | - | 11 ～ 28 | 11 ～ 28 | - | - | - | 11 ～ 28 | 11 ～ 28 | - | 11 ～ 28 |
| Tool Material Type | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | Powder high-speed steel | Powder high-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | Carbide | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel |
| Tap Type | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Spiral Tap | Hand Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Point tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Hand Tap | Hand Tap | Spiral Tap | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes |
| Hole type | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole |
| Chamfer threads (Lcf) | 3P | 3P | 2.5P | 2.5P | 3P | 5P | 2.5P | 1P | 2.5P | 2.5P | 2.5P | 2.5P | 3P | 3P | 2.5P | 3P | 2.5P | 2.5P | 2.5P | 2.5P | 1.5P ～ 5P | 1.5P ～ 5P | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P | 3.5P | 1.5P ～ 3.5P | 1.5P ～ 3.5P | 3.5P | 2.5P | 2.5P | 3.5P | 3.5P | 2.5P | 2.5P |
| Coating Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | TiN | - | - | - | - | - | TiN | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Coating Y/N | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | Available | NA | NA | NA | NA | NA | Available | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA |
| Overall Length (L)(mm) | 100 ～ 150 | 54 ～ 120 | 100 ～ 150 | 54 ～ 95 | 100 ～ 150 | 54 ～ 120 | 42 ～ 135 | 36 ～ 46 | 46 ～ 105 | 36 ～ 180 | 36 ～ 195 | 36 ～ 135 | 46 ～ 105 | 46 ～ 105 | 42 ～ 82 | 36 | 46 ～ 82 | 100 ～ 300 | 150 | 100 ～ 150 | 100 ～ 150 | 100 ～ 200 | 100 ～ 200 | 55 ～ 110 | 55 ～ 120 | 100 ～ 200 | 100 ～ 200 | 100 ～ 200 | 55 ～ 120 | 55 ～ 80 | 55 ～ 95 | 55 ～ 110 | 100 ～ 200 | 100 ～ 200 | 55 ～ 120 | 59 ～ 140 | 55 ～ 170 | 55 ～ 170 | 55 ～ 95 | 55 ～ 120 | 55 ～ 120 | 100 ～ 200 | 100 ～ 200 | 100 ～ 200 | 100 ～ 200 |
Loading...
Configure
Specification/Dimensions
-
Screw size (Nominal)
- CTG-54
- CTG-42
- CTG-36
- CTG-28
- CTG-22
- CTG-16
- No.0
- No.0UN
- NO.0-80UNF
- NO.10
- No.10
- No.1
- No.1UN
- No.10UN
- No.10UNF
- S0.1
- NO.1-72UNF
- NO.1-64UNC
- NO.10-32UNF
- No.10-32UNF
- NO.10-24UNC
- No.10-24UNC
- No.12
- No.12UN
- NO.12-28UNF
- No.12-28UNF
- NO.12-24UNC
- No.12-24UNC
- No.2
- No.2UN
- S0.2
- NO.2-64UNF
- No.2-64UNF
- NO.2-56UNC
- No.2-56UNC
- No.3
- No.3UN
- S0.3
- NO.3-56UNF
- No.3-56UNF
- NO.3-48UNC
- No.3-48UNC
- NO.4
- No.4
- No.4UN
- S0.4
- NO.4-48UNF
- No.4-48UNF
- NO.4-40UNC
- No.4-40UNC
- No.5
- No.5UN
- S0.5
- NO.5-44UNF
- No.5-44UNF
- NO.5-40UNC
- No.5-40UNC
- 0.6
- No.6
- No.6UN
- S0.6
- NO.6-40UNF
- No.6-32UNC
- 0.7
- S0.7
- 0.8
- No.8
- No.8UN
- S0.8
- NO.8-36UNF
- No.8-36UNF
- NO.8-32UNC
- No.8-32UNC
- 0.9
- S0.9
- 1
- 1UN
- 1UNS
- G1
- M1
- NPS1
- NPT1
- NPTF1
- PF1
- PF 1
- PS 1
- PT1
- PT 1
- R1
- Rp1
- S1
- UNC1
- UNF1
- W1
- 1'-11.5
- 1'-11
- 1-8UNC
- 1 1/2
- 1"1/2UN
- G1"1/2
- NPS1"1/2
- NPT1"1/2
- PS 1 1/2
- PT 1 1/2
- R1"1/2
- Rp1"1/2
- W1"1/2
- 1'1/2-11.5
- 1'1/2-11
- 1 1/2-8UN
- 1 1/4
- 1"1/4UN
- G1"1/4
- NPS1"1/4
- NPT1"1/4
- PS 1 1/4
- PT 1 1/4
- R1"1/4
- Rp1"1/4
- W1"1/4
- 1'1/4-11.5
- 1'1/4-11
- 1 1/4-8UN
- 1 1/8
- 1"1/8UN
- G1"1/8
- R1"1/8
- W1"1/8
- 1'1/8-11
- 1 1/8-8UN
- 1"1/16UN
- 1/2
- 1/2PF
- 1/2UN
- 1/2W
- G1/2
- NPS1/2
- NPT1/2
- NPTF1/2
- PF 1/2
- PS 1/2
- PT 1/2
- R1/2
- Rc1/2
- Rp1/2
- UNC1/2
- UNF1/2
- W1/2
- 1/2-20UNF
- 1/2-14
- 1/2-13UNC
- 1/2W12
- 1 3/4
- 1"3/4UN
- G1"3/4
- R1"3/4
- Rp1"3/4
- W1"3/4
- 1'3/4-11
- 1 3/4-8UN
- 1 3/8
- 1"3/8UN
- G1"3/8
- R1"3/8
- W1"3/8
- 1 3/8-8UN
- 1/4
- 1/4UN
- 1/4UNF
- 1/4W
- G1/4
- NPS1/4
- NPT1/4
- NPTF1/4
- PF1/4
- PF 1/4
- PT 1/4
- R1/4
- Rc1/4
- Rp1/4
- SM1/4
- UNC1/4
- UNF1/4
- W1/4
- 1/4-28UNF
- 1/4-20UNC
- 1/4-19
- 1/4-18
- 1/4W20
- 1 5/8
- W1"5/8
- 1 5/8-8UN
- M1 to 6
- M1～6
- W1"7/8
- 1 7/8-8UN
- 1 7/16
- 1 8
- 1'W8
- 1/8
- 1/8PT
- G1/8
- NPS1/8
- NPT1/8
- NPTF1/8
- PF1/8
- PF 1/8
- PS1/8
- PS 1/8
- PT 1/8
- R1/8
- Rc1/8
- Rp1/8
- SM1/8
- W1/8
- 1/8-28
- 1/8-27
- 1/8-18
- 1 9/16
- M1 to 10
- 1'11.5
- 1 12
- 1 14
- 1/16
- G1/16
- NPT1/16
- R1/16
- Rp1/16
- 1/16-28
- 1/16-27
- 1 20
- M1.1
- M1.2
- S1.2
- 1.25
- 1.29
- 1.37
- M1.4
- S1.4
- 1.45
- 1.5
- M1.6
- M1.7
- M1.8
- 2
- 2UN
- G2
- M2
- M2.0
- NPS2
- NPT2
- PT 2
- R2
- Rp2
- W2
- 2'-11.5
- 2'-11
- 2-8UN
- 2 1/2
- G2"1/2
- R2"1/2
- Rp2"1/2
- 2'1/2-11
- 2'1/2-8
- W2"1/4
- 2'1/4-11
- 2 4.5
- M2 to 4.5
- 2 12
- M2.2
- M2.3
- M2.5
- M2.6
- 3
- 3M
- G3
- M3
- M3.0
- R3
- Rp3
- STI M3
- 3'-11
- 3'-8
- 3 1/2
- G3"1/2
- R3"1/2
- Rp3"1/2
- 3'1/2-11
- 3/4
- 3/4UN
- G3/4
- NPS3/4
- NPT3/4
- NPTF3/4
- PF 3/4
- PS 3/4
- PT 3/4
- R3/4
- Rp3/4
- UNC3/4
- UNF3/4
- W3/4
- 3/4-16UNF
- 3/4-14
- 3/4-10UNC
- 3/4W10
- 3/8
- 3/8UN
- 3/8UNF
- 3/8W
- G3/8
- NPS3/8
- NPT3/8
- NPTF3/8
- PF3/8
- PF 3/8
- PS3/8
- PT3/8
- PT 3/8
- R3/8
- Rc3/8
- Rp3/8
- UNC3/8
- UNF3/8
- W3/8
- 3/8-24UNF
- 3/8-19
- 3/8-18
- 3/8-16UNC
- 3/8W16
- M3 to 10
- 3/16
- SM3/16
- W3/16
- 3/32
- SM3/32
- 3.5
- M3.5
- M3.5
- 4
- 4M
- G4
- M4
- M4.0
- R4
- Rp4
- STI M4
- 4'-11
- M4 to 6
- M4 to 13
- M4.5
- M4.5
- 5
- 5M
- M5
- M5.0
- STI M5
- 5/1
- 5/8
- 5/8UN
- G5/8
- NPS5/8
- R5/8
- UNC5/8
- UNF5/8
- W5/8
- 5/8-18UNF
- 5/8-14
- 5/8-11UNC
- 5/8W11
- M5 to 10
- M5 to 13
- 5/16
- 5/16UN
- 5/16UNF
- 5/16W
- UNC5/16
- UNF5/16
- W5/16
- 5/16-24UNF
- 5/16-18UNC
- 5/16W18
- 5/32
- W5/32
- 5/64
- M5.5
- M5.5
- 6
- M6
- M6.0
- STI M6
- No6-40UNF
- M6 to 20
- M7
- M7
- PG7
- 7/8
- 7/8UN
- G7/8
- NPS7/8
- R7/8
- UNC7/8
- UNF7/8
- W7/8
- 7/8-14
- 7/8-14UNF
- 7/8-9UNC
- 7/8W9
- 7/16
- 7/16UN
- UNC7/16
- UNF7/16
- W7/16
- 7/16-20UNF
- 7/16-14UNC
- 7/16W14
- 7/32
- SM7/32
- 7.5
- 8
- M8
- STI M8
- 9
- M9
- M9
- PG9
- 9/16
- 9/16UN
- UNF9/16
- W9/16
- 9/16-18UNF
- 9/16-12UNC
- SM9/32
- 9/64
- SM9/64
- 10
- M10
- M10.0
- STI M10
- Tr 10
- M10 to 13
- M10 to 25
- 11
- M11
- M11
- PG11
- 11/16
- SM11/32
- 11/64
- SM11/64
- 12
- M12
- M12.0
- STI M12
- Tr 12
- 13
- M13
- PG13.5
- M14
- M14.0
- M14
- Tr 14
- 15
- M15
- 15/64
- SM15/64
- 16
- M16
- M16.0
- M16
- PG16
- Tr 16
- 17
- M17
- M18
- M18
- Tr 18
- 19
- M19
- M19 to 32
- M19 to 38
- 20
- M20
- M20
- Tr 20
- M21
- PG21
- 22
- M22
- M22
- M22X
- Tr 22
- M23
- M24
- M24
- M24X
- Tr 24
- 25
- M25
- M25X
- Tr 25
- M25 to 50
- M25 to 70
- M26
- Tr 26
- M27
- 28
- M28
- Tr 28
- PG29
- M30
- Tr 30
- 31
- 31/32
- M32
- M33
- M34
- M35
- 36
- M36
- PG36
- M37
- M38
- 39
- M39
- M40
- 42
- M42
- PG42
- M44
- M45
- M46
- M48
- M50
- M52
- M56
- 1015
- 1020N100M
- 1020N150M
- 06510X28R
- 10154
- 12204
- 12254N100M
- 12254N150M
- 12254N200M
- 16304N100M
- 16304N150M
- 16304N200M
- 16304N250M
- 20305
- 20505N100M
- 20505N150M
- 20505N200M
- 20505N300M
- 20505N350M
- 25506N100M
- 25506N150M
- 25506N200M
- 25506N300M
- 25506N350M
- 32506
- 32506N150M
- 32506N200M
- 32506N300M
- 035083N075M
- 035083N080M
- 040123N100M
- 060163N050M
- 060163N100M
- 060163N125M
- 065103X28G
- 075203N125M
- 075203N150M
- 080153X19G
- 080153X19R
- 080203N050M
- 080203N100M
- 090244N125M
- 090244N175M
- 100254N050M
- 100254N100M
- 100254N150M
- 100254N200M
- 120204X14G
- 120204X14R
- 120304N100M
- 120304N150M
- 120304N200M
- 160264X11G
- 160264X11R
- 160404N150M
- 160404N200M
- 160404N250M
- 200305X11G
- 200305X11R
- 200505N150M
- 200505N200M
- 200505N300M
-
Screw Types
- Meter
- unified
- Whitworth
- Sewing Machine
- Taper for Pipe
- Parallel for Pipes
- Trapezoid
- Miniature
- Other
-
work material
- Low-Carbon Steel (carbon alloy less than 0.25%)
- Medium carbon steel (carbon content 0.25 to 0.45%)
- High Carbon Steel (C with a content over 0.45%)
- Alloy Steel (SCM)
- Stainless steel (SUS)
- Quenched and tempered steel (25 to 35 HRC)
- Quenched and tempered steel (35 to 45 HRC)
- Quenched and tempered steel (45 to 55 HRC)
- High Hardness Steel (50-60 HRC)
- Tool Steel (Before SKD Hardening)
- Steel casting (SC)
- Cast Iron (FC)
- Ductile Cast Iron (FCD)
- Copper (Cu)
- Brass (Bs)
- Brass cast iron (BsC)
- Bronze (Pb)
- Aluminum Rolled Material (AL)
- Aluminum Alloy Casting (AC, ADC)
- Magnesium Alloy (MC)
- Zinc Alloy Casting (ZDC)
- Titanium Alloy (Ti-6Al-4V, etc)
- Nickel-based alloy (Inconel, etc.)
- Thermosetting plastic (bakelite, phenol, etc.)
- Thermoplastic plastic (vinyl chloride, nylon, etc.)
-
Pitch (P), Number of Threading(mm)
- .02
- 0.025
- 0.05
- 0.08
- 0.1
- 0.125
- 0.15
- 0.175
- 0.2
- 0.225
- 0.25
- 0.3
- 0.35
- 0.4
- 0.45
- 0.5
- 0.529
- 0.6
- 0.63
- 0.7
- 0.75
- 0.75、1.00、1.25、1.50、1.75、2.00、2.50、3.00
- 0.79
- 0.794
- 0.8
- 0.9
- 0.907
- 0.974
- 1
- 1.058
- 1.25
- 1.27
- 1.5
- 1.75
- 2
- 2.5
- 3
- 3.5
- 4
- 4.5
- 5
- 5.5
- 6
- 7
- 8
- 9
- 10
- 10、11、12、14、16、18、20、24F
- 11
- 11 1/2
- 11.5
- 12
- 13
- 14
- 16
- 18
- 19
- 20
- 24
- 26
- 27
- 28
- 30
- 32
- 36
- 40
- 44
- 48
- 56
- 64
- 72
- 80
- 100
-
Tool Material Type
-
Tap Type
-
Hole type
-
Chamfer threads (Lcf)
-
Coating Type
-
Coating Y/N
-
Overall Length (L)(mm)
Narrow search by specifying Manufacturer
-
- MISUMI (13)
- YAMAWA MFG (122)
- OSG (105)
- DOY FURNITURE (5)
- HOZAN (4)
- NACHI (4)
- GUHRING (3)
- SANDVIK (3)
- TRUSCO NAKAYAMA (3)
- RUKO (2)
- ISHIHASHI (1)
- NS TOOL (1)
- H & H (0)
- KO-KEN TOOL (0)
- MITSUTOMO (0)
- NEW STRONG (0)
- NIIGATASEIKI (0)
- TSUBOSAN (0)
- TANOI MFG (0)
- TOP (0)
- ONISHI (0)
- ENGINEER (0)
- UNION TOOL (0)
- SKC (0)
- EIKOSHA (0)
- RENNSTEIG (0)
- ESCO (0)
- LIGHTSEIKI (0)
CAD
-
- 2D
- 3D
Related Categories to Screw-Hole-Related Tools
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy