(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
| Days to Ship |
|
|---|

TRUSCO NAKAYAMA
[Features]
· Each surface of the edge of the Allen wrench tip is evenly chamfered. Insertion into hex sockets has become easier than ever, and in addition, the chamfered angle is considered to fit the corners of the bottom of the hex socket for closer contact.
· The hardness is HRC 54-59.
· Made from chrome vanadium steel.
| Standard Price: | MYR 322.18 |
|---|---|
| Days to Ship: | 9 Day(s) |

Ballpoint Hexagonal Bar Wrench Set (9 Set) 【9 Pieces Per Package】
TRUSCO NAKAYAMA
[Features]
· Each surface of the edge of the Allen wrench tip is evenly chamfered. Insertion into hex sockets has become easier than ever, and in addition, the chamfered angle is designed to fit the corners of the bottom of the hex socket for closer contact.
· Matte chrome plating.
· The hardness is HRC 52-56.
| Standard Price: | MYR 237.81 |
|---|---|
| Days to Ship: | 9 Day(s) |

Hex wrench【1-8 Pieces Per Package】
TRUSCO NAKAYAMA
[Features]
· Use the shorter end and hold the longer end to tighten with greater force. Use the longer end and hold the shorter end to handle the product to tighten at greater rotating speed.
· The hardness is HRC 54-59.
· Made from chrome vanadium steel.
| Standard Price: | MYR 97.41- |
|---|---|
| Days to Ship: | 1 Day(s) or more |

"Torsion Hex Wrench" (Opposite Side and Angle Bent Type)
TRUSCO NAKAYAMA
[Features]
· Since the underneck has a short design, the wrench can be easily inserted into and taken out of places where there is very little space above the bolt.
· The double-ended wrench has opposite-side bending and opposite-angle bending on each end, making it ideal for places with narrow openings. (Available with the range of 30°)
· The hardness is HRC 53-57.
· Made from chrome vanadium steel.
| Standard Price: | MYR 367.40 |
|---|---|
| Days to Ship: | 5 Day(s) or more |

Ballpoint Hexagonal Bar Wrench (Long Type)【1-9 Pieces Per Package】
TRUSCO NAKAYAMA
[Features]
· Easily catches screws, allowing them to be quickly and easily fastened without wasted time.
· The hardness is HRC 54-59.
· Made from chrome vanadium steel.
| Standard Price: | MYR 237.92- |
|---|---|
| Days to Ship: | 5 Day(s) or more |

Ballpoint Hexagonal Bar Wrench (Short Stem Long Type)
TRUSCO NAKAYAMA
[Features]
· High-torque, tough nickel-chrome-molybdenum steel has been used.
· Holder can be rotated to enable each differently sized wrench to be taken out and put back easily.
· Matte chrome plating.
· The hardness is HRC 55-60.
| Standard Price: | MYR 267.88 |
|---|---|
| Days to Ship: | 1 Day(s) |

TRUSCO NAKAYAMA
[Features]
· An iron plate thickness of 3 mm widely increases JIS certification torque.
· Commercially-available bits can be used with the hex holes on the rear of the handle, and deep screw tightening can be achieved by installing long bits.
[Applications]
· For tightening screws in narrow places and deep places.
· Can be used for a wide range of applications, such as in-factory work, maintenance of machinery and vehicles, etc.
| Standard Price: | MYR 80.33 |
|---|---|
| Days to Ship: | 9 Day(s) |

Ballpoint Hexagonal Bar Wrench【7 Pieces Per Package】
TRUSCO NAKAYAMA
[Features]
· Each surface of the edge of the Allen wrench tip is evenly chamfered. Insertion into hex sockets has become easier than ever, and in addition, the chamfered angle is considered to fit the corners of the bottom of the hex socket for closer contact.
· The hardness is HRC 54-59.
· Made from chrome vanadium steel.
| Standard Price: | MYR 217.41 |
|---|---|
| Days to Ship: | 9 Day(s) |

Ballpoint Hexagonal Bar Wrench【8 Pieces Per Package】【8 Pieces Per Package】
TRUSCO NAKAYAMA
[Features]
· Each surface of the edge of the Allen wrench tip is evenly chamfered. Insertion into hex sockets has become easier than ever, and in addition, the chamfered angle is considered to fit the corners of the bottom of the hex socket for closer contact.
· The hardness is HRC 54-59.
· Made from chrome vanadium steel.
| Standard Price: | MYR 265.50 |
|---|---|
| Days to Ship: | 6 Day(s) or more |

TRUSCO NAKAYAMA Ball End Hex Key (Black Oxide Coating)【9-12 Pieces Per Package】
TRUSCO NAKAYAMA
[Features]
· Holder can be rotated to easily take out and put back different sizes of hex wrenches.
· This product has black oxide surface processing.
· The hardness is HRC 52-56.
| Standard Price: | MYR 139.52- |
|---|---|
| Days to Ship: | 5 Day(s) or more |

Ballpoint Hexagonal Bar Wrench (Short Type)【1-12 Pieces Per Package】
TRUSCO NAKAYAMA
[Features]
· Holder can be rotated to easily take out and put back different sizes of hex wrenches.
· This product has black oxide surface processing.
· The hardness is HRC 50-58.
| Standard Price: | MYR 121.92- |
|---|---|
| Days to Ship: | 9 Day(s) |

Ballpoint Hexagonal Bar Wrench Set (7 set) 【7 Pieces Per Package】
TRUSCO NAKAYAMA
[Features]
· Stored in a holder which makes it portable and convenient for storage.
· The hardness is HRC 52-56.
· Made of general chrome vanadium steel.
| Standard Price: | MYR 172.91 |
|---|---|
| Days to Ship: | 9 Day(s) |

"Ball-Point Hex Wrench" (with Catcher Ball)
TRUSCO NAKAYAMA
[Features]
· Since the neck length is approximately 1/2 the standard type, it can be used for working in narrow places.
· A ball point type with catcher ball on the tip, which boasts excellent workability in narrow places. (3 mm or more)
· It has a diagonal curve.
· The hardness is HRC 53-57.
[Applications]
· Tightening of screws in narrow spaces.
| Standard Price: | MYR 382.82 |
|---|---|
| Days to Ship: | 9 Day(s) |

"Long Ball-Point Hex Wrench" (with Catcher Ball)
TRUSCO NAKAYAMA
[Features]
· Since the neck length is approximately 1/2 the standard type, it can be used for working in narrow places.
· A ball point type with catcher ball on the tip, which boasts excellent workability in narrow places. (3 mm or more)
· The hardness is HRC 53-57.
[Applications]
· Tightening of screws in narrow spaces.
| Standard Price: | MYR 471.94 |
|---|---|
| Days to Ship: | 9 Day(s) |

Short neck 100° long ball point hex wrench (with catcher ball) TTV100-9S
TRUSCO NAKAYAMA
[Features]
· In order to prevent fingertips from touching the work surface, the bend angle is increased from the conventional 90° to 100° for better usability.
· Made from chrome vanadium steel.
· The length in the short direction is set to approximately half the conventional standard, extremely effective for working in confined spaces.
· Equipped with a catcher ball at the tip (3 mm or more).
· The hardness is HRC 53-57.
[Applications]
· Tightening and loosening work for hex socket bolts and hex socket set screws.
| Standard Price: | MYR 496.05 |
|---|---|
| Days to Ship: | 5 Day(s) or more |

Ballpoint Hexagonal Bar Wrench (Short Neck)
TRUSCO NAKAYAMA
[Features]
· High-torque, tough nickel-chrome-molybdenum steel has been used.
· Holder can be rotated to enable each differently sized wrench to be taken out and put back easily.
· Matte chrome plating.
· The hardness is HRC 55-60.
| Standard Price: | MYR 260.06 |
|---|---|
| Days to Ship: | 9 Day(s) |

Stem Long Ball-Point Hex Wrench (Long Type)
TRUSCO NAKAYAMA
[Features]
· Ideal for fastening in deep places.
· High-torque, tough nickel-chrome-molybdenum steel has been used.
· Holder can be rotated to enable each differently sized wrench to be taken out and put back easily.
· Matte chrome plating.
· The hardness is HRC 55-60.
· Ideal for fastening in deep places.
· High-torque, tough nickel-chrome-molybdenum steel has been used.
· Holder can be rotated to easily take out and put back different sizes of wrenches.
| Standard Price: | MYR 388.01 |
|---|---|
| Days to Ship: | 9 Day(s) |

Ballpoint Hexagonal Bar Wrench Set (7 Unit Knife Type) 【7 Pieces Per Package】
TRUSCO NAKAYAMA
[Features]
· Hex bar wrench and grip can be fixed at 90° for easy operation.
· Pull out just the sizes required just like pocketknives.
· Folding type is convenient for carrying.
· This product has black oxide surface processing.
· The hardness is HRC 52-56.
· Made from chrome vanadium steel.
[Applications]
· For tightening and loosening hex socket bolts.
| Standard Price: | MYR 91.32 |
|---|---|
| Days to Ship: | 9 Day(s) |

Hex wrench (long type)【1-8 Pieces Per Package】
TRUSCO NAKAYAMA
[Features]
· Use the shorter end and hold the longer end to tighten with greater force. Use the longer end and hold the shorter end to handle the product to tighten at greater rotating speed.
· The hardness is HRC 54-59.
· Made from chrome vanadium steel.
| Standard Price: | MYR 152.05- |
|---|---|
| Days to Ship: | 9 Day(s) |

Hex wrench _Cr-V【1-9 Pieces Per Package】
TRUSCO NAKAYAMA
[Features]
· Holder can be rotated to easily take out and put back different sizes of hex wrenches.
| Standard Price: | MYR 145.56- |
|---|---|
| Days to Ship: | 9 Day(s) |

TRUSCO NAKAYAMA
[Features]
· Holder can be rotated to easily take out and put back different sizes of hex wrenches.
| Standard Price: | MYR 168.74- |
|---|---|
| Days to Ship: | 9 Day(s) |

Hex wrench (short type)【8 Pieces Per Package】
TRUSCO NAKAYAMA
[Features]
· Both ends are chamfered which makes it easy to insert into hex sockets.
· Stable quality is provided by excellent heat treatment.
· Cationic electrodeposition coating for sizes of 8 mm or above keeps hands clean.
| Standard Price: | MYR 56.18 |
|---|---|
| Days to Ship: | 5 Day(s) or more |

TRUSCO NAKAYAMA
[Features]
· Made of chrome vanadium steel (Cr-V).
· The hardness is HRC 50-58.
| Standard Price: | MYR 100.13- |
|---|---|
| Days to Ship: | 8 Day(s) or more |

Hex wrench set (9 pieces per set)
TRUSCO NAKAYAMA
[Features]
· Engages hex sockets securely and ensures the tightening of screws.
· The hardness is HRC 52-56.
· Matte chrome plating.
| Standard Price: | MYR 184.04 |
|---|---|
| Days to Ship: | 9 Day(s) |

Hex wrench set (ring type)【8-10 Pieces Per Package】
TRUSCO NAKAYAMA
[Features]
· A ring type with excellent portability. Can be hooked anywhere like a key chain.
· The hardness is HRC 52-56.
· Made of general chrome vanadium steel.
| Standard Price: | MYR 49.41- |
|---|---|
| Days to Ship: | 5 Day(s) or more |

Hex wrench set (7 pieces per set, knife type)
TRUSCO NAKAYAMA
[Features]
· Hex bar wrench and grip can be fixed at 90° for easy operation.
· Pull out just the sizes required just like pocketknives.
· Folding type is convenient for carrying.
· The hardness is HRC 50-58.
[Applications]
· For tightening and loosening hex socket bolts.
| Standard Price: | MYR 62.06 |
|---|---|
| Days to Ship: | 5 Day(s) or more |

Hex wrench set (knife type)【6-7 Pieces Per Package】
TRUSCO NAKAYAMA
[Features]
· Pull out just the sizes required just like pocketknives.
· The holder works as a grip.
· The hardness is HRC 52-56.
| Standard Price: | MYR 101.52- |
|---|---|
| Days to Ship: | 9 Day(s) |

Hex wrench set (10 pieces per set, ring type)【604 Pieces Per Package】
TRUSCO NAKAYAMA
[Features]
· A ring type with excellent portability. Can be hooked anywhere like a key chain.
· The hardness is HRC 52-56.
· Made of general chrome vanadium steel.
| Standard Price: | MYR 63.19 |
|---|---|
| Days to Ship: | 9 Day(s) |

"Short Multifunctional Torsion Wrench" (Opposite Side and Angle Bent Type)
TRUSCO NAKAYAMA
[Features]
· Both ends are bent toward the opposite side and opposite corner, and it is possible to use at swing angle 30°.
· It is useful for working in a small place where the space for rotating a hex wrench cannot be secured adequately.
· The hardness is HRC 53-57.
· Made of general chrome vanadium steel.
· Short type torsion wrench TTX-9S.
[Applications]
· Tightening of screws in narrow spaces.
| Standard Price: | MYR 398.21 |
|---|---|
| Days to Ship: | 9 Day(s) |

Stainless Steel Ball Point Hex Wrench (Standard Type)【9 Pieces Per Package】
TRUSCO NAKAYAMA
A ballpoint L type wrench made of stainless steel and featuring outstanding corrosion resistance, chemical resistance, and shock resistance. A ballpoint type that can be used at an approximately 25° slant. Holder can be rotated to enable each differently sized wrench to be taken out and put back easily.
| Standard Price: | MYR 278.12 |
|---|---|
| Days to Ship: | 1 Day(s) |

Stainless Steel Ball Point Hex Wrench (Long Type)【9 Pieces Per Package】
TRUSCO NAKAYAMA
A long ballpoint L type wrench made of stainless steel and featuring outstanding corrosion resistance, chemical resistance, and shock resistance. A ballpoint type that can be used at an approximately 25° slant. Holder can be rotated to enable each differently sized wrench to be taken out and put back easily.
| Standard Price: | MYR 354.31 |
|---|---|
| Days to Ship: | 5 Day(s) or more |

Ballpoint Hexagonal Bar Wrench (Inch Size)【1-9 Pieces Per Package】
TRUSCO NAKAYAMA
Machined with a ball point, it can be used tilted by approximately 25°, speeding up temporary tightening of bolts, and increasing workability. Black oxide treated. Made from chrome vanadium steel. Holder can be rotated to enable each differently sized wrench to be taken out and put back easily.
| Standard Price: | MYR 141.68- |
|---|---|
| Days to Ship: | 1 Day(s) |

T-Shaped Handle Ball-Point Hex Wrench
TRUSCO NAKAYAMA
T handle type 2-point fastening type. The ball point part can be tilted to one corner at angle of 25° and the tool shows its strength when working in confined areas which are normally out of reach. Hardness is HRC 55 to 60. Made from chrome vanadium steel.
| Standard Price: | MYR 465.89 |
|---|---|
| Days to Ship: | 9 Day(s) |

TRUSCO NAKAYAMA
Mini-size miniscule wrench. The surface features a black oxide finish. Made from chrome vanadium steel.
| Standard Price: | MYR 26.09 |
|---|---|
| Days to Ship: | 1 Day(s) |

Hex wrench (inch size) - L-shape
TRUSCO NAKAYAMA
Both ends are chamfered which makes it easy to insert into hex sockets. Stable quality is provided by excellent heat treatment. The surface features a black oxide finish. Made from chrome vanadium steel. Holder can be rotated to enable each differently sized wrench to be taken out and put back easily.
| Standard Price: | MYR 133.97- |
|---|---|
| Days to Ship: | 9 Day(s) |

Ballpoint Hexagonal Bar Wrench Set with Black Oxide Finish 【16 Pieces Per Package】
TRUSCO NAKAYAMA
[Features]
· This product has black oxide surface processing.
· The hardness is HRC 52-56.
| Standard Price: | MYR 674.96 |
|---|---|
| Days to Ship: | 9 Day(s) |

Square Bent Ball-Pointed Hex Wrench Set
TRUSCO NAKAYAMA
[Features]
· It is a hexagonal bar wrench rotated by 30° with consideration for ease of use.
· The special processing technology provides high durability and abrasion resistance.
· Final tightening can also be performed with the ball point part.
| Standard Price: | MYR 380.02 |
|---|---|
| Days to Ship: | 9 Day(s) |

Hex wrench set (pouch type)【16 Pieces Per Package】
TRUSCO NAKAYAMA
Hex wrench set with black finish.
[Features]
·Hardness: HRC52-56.
·Quantity per packet: 16 pieces.
| Standard Price: | MYR 584.71 |
|---|---|
| Days to Ship: | 9 Day(s) |

Half-Ball Hex Wrench Set (Semi-Long)
TRUSCO NAKAYAMA
[Features]
· The tip of the short side has undergone half ball point processing. The approach to the hex sockets is easier than the conventional product as a half ball is used.
· Half ball finish allows achievement of easy insertion and the same level of torque transferability.
· The screw can be turned from a maximum slope degree of 32°.
· It utilizes high-quality special alloy chrome vanadium steel (SNCM20V).
· In order to ensure homogeneous and highly accurate tempering (heat treatment) hardness (HRC 60° ±1°), a continuous furnace was intentionally not used, while a sealed-quench furnace / non-oxidizing, decarburizing correction quenching method has been adopted.
· The surface processing of special chrome plating exerts excellent wear resistance and prevents rust over a long period of time.
· Final tightening can be performed with a ballpoint wrench by using the pipe handle.
· Partial painting is done so that the size can be distinguished at a glance based on color.
| Standard Price: | MYR 422.09 |
|---|---|
| Days to Ship: | 9 Day(s) |
| Brand |
|---|
| Product Series |
| Days to Ship |
| Width across flat dimension(mm) |
| Width across flat dimension(Inch) |
| Tip Type |
| Type |
| Single Product/Set Classification |
| Overall length (L dimension)(mm) |
| Hex bar wrench underneck length (H dimension) L-shape only(mm) |
| Brand | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Product Series | Ballpoint Hexagonal Bar Wrench Set (9 Set) 【9 Pieces Per Package】 | Ballpoint Hexagonal Bar Wrench (Long Type)【1-9 Pieces Per Package】 | Ballpoint Hexagonal Bar Wrench【8 Pieces Per Package】【8 Pieces Per Package】 | TRUSCO NAKAYAMA Ball End Hex Key (Black Oxide Coating)【9-12 Pieces Per Package】 | Ballpoint Hexagonal Bar Wrench (Short Type)【1-12 Pieces Per Package】 | Ballpoint Hexagonal Bar Wrench Set (7 set) 【7 Pieces Per Package】 | Short neck 100° long ball point hex wrench (with catcher ball) TTV100-9S | Ballpoint Hexagonal Bar Wrench Set (7 Unit Knife Type) 【7 Pieces Per Package】 | Hex wrench set (10 pieces per set, ring type)【604 Pieces Per Package】 | "Short Multifunctional Torsion Wrench" (Opposite Side and Angle Bent Type) | Stainless Steel Ball Point Hex Wrench (Standard Type)【9 Pieces Per Package】 | Stainless Steel Ball Point Hex Wrench (Long Type)【9 Pieces Per Package】 | Ballpoint Hexagonal Bar Wrench (Inch Size)【1-9 Pieces Per Package】 | Ballpoint Hexagonal Bar Wrench Set with Black Oxide Finish 【16 Pieces Per Package】 | |||||||||||||||||||||||||
| Days to Ship | 9 Day(s) | 9 Day(s) | 1 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 1 Day(s) | 9 Day(s) | 9 Day(s) | 6 Day(s) or more | 5 Day(s) or more | 9 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 5 Day(s) or more | 9 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 5 Day(s) or more | 8 Day(s) or more | 9 Day(s) | 5 Day(s) or more | 5 Day(s) or more | 9 Day(s) | 9 Day(s) | 9 Day(s) | 1 Day(s) | 5 Day(s) or more | 1 Day(s) | 9 Day(s) | 1 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) |
| Width across flat dimension(mm) | 1.5 ~ 10 | 1.5 ~ 10 | 1.5 ~ 10 | 1.5 ~ 10 | 1.5 ~ 10 | 1.5 ~ 10 | 2 ~ 6 | 1.5 ~ 6 | 1.5 ~ 8 | 1.5 ~ 10 | 1.5 ~ 10 | 2.5 ~ 10 | 1.5 ~ 10 | 1.5 ~ 10 | 1.5 ~ 10 | 1.5 ~ 10 | 1.5 ~ 10 | 1.5 ~ 6 | 1.5 ~ 10 | 1.5 ~ 10 | 1.5 ~ 10 | 2.5 ~ 12 | 1.5 ~ 10 | 1.5 ~ 10 | 1.5 ~ 10 | 1.5 ~ 6 | 1.5 ~ 10 | - | 1.5 ~ 10 | 1.5 ~ 10 | 1.5 ~ 10 | - | 2 ~ 10 | 0.89 ~ 4 | - | - | - | - | - |
| Width across flat dimension(Inch) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1/4 ~ 7/32 | - | - | - | 0.05 ~ 9/64 | - | - | 0.05 ~ 9/64 | - | - | - | - |
| Tip Type | Ballpoint | Ballpoint | Standard Type | Standard Type | Ballpoint | Ballpoint | Standard Type | Ballpoint | Ballpoint | Ballpoint | Ballpoint | Ballpoint | Ballpoint | Ballpoint | Ballpoint | Ballpoint | Ballpoint | Ballpoint | Standard Type | Standard Type | Standard Type | Standard Type | Standard Type | Standard Type | Standard Type | Standard Type | Standard Type | Standard Type | Standard Type | Ballpoint | Ballpoint | Ballpoint | Ballpoint | Standard Type | Standard Type | Ballpoint | Ballpoint | Standard Type | Ballpoint |
| Type | Hex L-shape wrench | Hex L-shape wrench | Hex L-shape wrench | Hex L-shape wrench | Hex L-shape wrench | Hex L-shape wrench | Other | Hex L-shape wrench | Hex L-shape wrench | Hex L-shape wrench | Hex L-shape wrench | Hex L-shape wrench | Hex L-shape wrench | Hex L-shape wrench | Hex L-shape wrench | Hex L-shape wrench | Hex L-shape wrench | Knife-shaped | Hex L-shape wrench | Hex L-shape wrench | Hex L-shape wrench | Hex L-shape wrench | Hex L-shape wrench | Hex L-shape wrench | Hex L-shape wrench | Knife-shaped | Knife-shaped | Hex L-shape wrench | Hex L-shape wrench | Hex L-shape wrench | Hex L-shape wrench | Hex L-shape wrench | T Type | Hex L-shape wrench | Hex L-shape wrench | Hex L-shape wrench | Hex L-shape wrench | Hex L-shape wrench | Hex L-shape wrench |
| Single Product/Set Classification | Set Product | Set Product | Set Product | Set Product | Set Product | Set Product | Set Product | Set Product | Set Product | Set Product | Set Product | Set Product | Set Product | Set Product | Set Product | Set Product | Set Product | Set Product | Set Product | Set Product | Set Product | Set Product | Set Product | Set Product | Set Product | Set Product | Set Product | Set Product | Set Product | Set Product | Set Product | Set Product | Set Product | Set Product | Set Product | Set Product | Set Product | Set Product | Set Product |
| Overall length (L dimension)(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Hex bar wrench underneck length (H dimension) L-shape only(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy